As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Basic salary: ($3,200 - $4,500)

Location: Serangoon

Mon - Fri, 8.30am to 6pm

Job Description

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Job Requirements

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA would be highly advantageous
• Good communication and problem-solving skills
• Medical product experience and Quality Management System exposure would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description:

Candidate will be part of Far-Backend Of Line (Far-BEOL) team of process module engineers, advancing specialty technologies at IME. His or her main roles and responsibilities include:

• Develop and support Chemical Mechanical Planarization (CMP) unit process capabilities for silicon photonics, flat optics, advanced packaging, MEMS, and wide bandgap semiconductor applications.
• Deliver innovations involving process methodologies, materials, or approach, and generate intellectual property related to various aspects of CMP.
• Participate as team member with process integration teams to actively support CMP process development, optimization and troubleshooting for various industry and grant projects.
• File patents/know-hows on new development activities.
• Publish research findings in prestigious journals and conferences.

Job Requirement:

• Masters with specialization in Electronics / Microelectronics / Materials Engineering / Chemical Engineering / Materials Science/ Chemistry / Physics or equivalent.
• Minimum 5 years of experience in CMP technologies, preferably in an industrial setting.
• Prior hands-on experience working on industry-scale 200 mm or 300 mm CMP equipment platforms (e.g., AMAT or Ebara platforms), with in-depth technical knowledge in process development, materials, and inline process control related to CMP.
• Knowledge of silicon photonics, advanced packaging, MEMS, or wide bandgap semiconductor technology platforms would be a plus, but not mandatory.
• Strong experimental design (DOE) and data analysis skills is preferred.
• Good interpersonal and strong demonstrated skills in collaborating with internal and external stakeholders.
• At least 2 years of demonstrated experience in managing projects of moderate complexity is preferred
• Good analytical skills and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.
• Self-driven with strong interest in next-generation applications of CMP technologies and industry trends.

ROLE:

A*Star-IME is currently working on establishing a hybrid fabrication platform for 150mm and 200mm Silicon Carbide (SiC) power MOSFETs as a new pillar on Singapore"s Future of Microlectronics in wide-bandgap. The main objective of this SiC RnD program is to advance 200mm SiC technologies in various areas, such as epitaxy, device design, process integration & fabrication, and power module packaging. The ultimate aim is to drive disruptive innovations in power device research, specifically focusing on >1.7KV power MOSFETs. These innovations will have significant applications in enhancing automotive technologies, vehicle electrification, safety measures, sustainable energy grids, data centers, and industrial & aerospace automation. Key aspects for this role to be successful include the development and integration of several process modules, such as gate oxidation, implantation, implant activation, layout design verification, lithography, and ohmic contact formation. We are actively looking for individuals with extensive industry experience in device physics and process integration to join our team. The candidate will contribute to process integration, E-test and module process related data analysis, yield enhancement, and device physics.

RESPONSIBILITIES:

• Lead develop process technology for SiC power MOSFETs and ensure it meets the requirements for prototyping manufacturing

• Collaborate with advanced process module development team to establish a process flow for fabricating specific MOS devices

• Responsible to develop and improve test structures that enable fast and rigorous characterization of process

• Accountable to improve device performance and yield through the design, execution, and analysis of experiments for each specific device and product

• Work with cross-functional teams to minimize defects and address technical and yield concerns

• Drive CIP (Continuous improvement plans) to deliver integrated process modules and specific device per project goals

• Make decisions regarding the delivery of process, active and passive devices to multiple customers

REQUIREMENTS:

• MS/PhD Degree in Electrical Engineering or related field

• >3 years industrial experience for MOSFET process integration and device physics

• Proactive, self-motivated, and results-oriented professional with the ability to make efficient contributions to and lead technical discussions

• Extensive expertise in material and process integration

• Comprehensive understanding of semiconductor materials and the physics of MOSFET devices

• Strong communication skills to effectively communicate information about module integration for device fabrication and with customers

• Excellent analytical skills for interpreting process and device data, coupled with strong presentation abilities

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. cynapse’s software platform is leveraging cutting-edge cloud/on-premise/edge platforms, advanced computer vision algorithms, advanced ML concepts & models, and more.

The company Headquarter is located in Singapore (one-north Area)

Job Description

Cynapse is looking for a talented and highly motivated Computer Vision & Machine Learning Developer to join our AI team that delivers a challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of design and coding, working in a cutting-edge, dynamic and professionally challenging environment.

Responsibilities

• Assist in the development and training of computer vision models using state-of-the-art machine learning techniques.
• Work with large datasets for model training.
• Collaborate with engineers to implement and fine-tune models, focusing on performance, accuracy, and scalability.
• Contribute to the deployment and monitoring of trained models in production environments, ensuring robustness and reliability.
• Participate in the development and maintenance of MLOps pipelines, automating the process of model training, deployment, and monitoring.
• Conduct research to explore and implement the latest computer vision and MLOps techniques and technologies.
• Maintain and update model pipelines, ensuring they meet project requirements and deadlines.

Qualifications

• Bachelor’s degree in Computer Science, Data Science, Artificial intelligence, Mathematic, Electrical Engineering, or a related field.
• Solid understanding of machine learning concepts, particularly neural networks and their applications in computer vision (e.g., convolutional neural networks, transfer learning, and deep learning architectures).
• Proficient in one or more popular machine learning frameworks such as TensorFlow, PyTorch, or similar.
• Experienced with computer vision libraries like OpenCV, scikit-image, or equivalent.
• Strong programming skills in Python, with expertise in using tools like NumPy, Pandas, and Matplotlib for data manipulation and visualization.
• Knowledge of data preprocessing techniques, including image augmentation, normalization, and resizing.
• Basic understanding of MLOps practices, including version control, continuous integration, and continuous deployment (CI/CD).
• Strong analytical and problem-solving skills with attention to detail.
• Good communication skills, both written and verbal, with the ability to work collaboratively in a team environment.
• Eagerness to learn and adapt to new tools and technologies in the rapidly evolving fields of machine learning, computer vision, and MLOps.
• (Optional) Experience with cloud platforms like AWS, GCP, or Azure is a plus.
• (Optional) Knowledge of Docker or other containerization tools for model deployment.
• (Optional) Familiarity with MLOps tools like MLflow, Kubeflow, or similar is a plus.

Personal Competencies

• Innovative, motivated and a quick learner
• Ability to work well in a small team and take end-to-end ownership of problems and their resolution
• Attention to detail, curiosity, and passion for technology

Benefits

• Competitive base salary and a generous stock option package
• Unique opportunity to work with a talented global team on cutting edge technologies
• informal and exciting work environment with flexible hours

Due to the nature of the role, the position is considered for candidates that are only based in Singapore

Job Type: Full-time

Pay: $4,500.00 - $7,000.00 per month

Benefits:

• Health insurance

Schedule:

• Monday to Friday

Supplemental Pay:

• 13th month salary

Work Location: In person

Engineer - Analog / RF Design [Radio System Solutions]

Job Description:

• Design of RF/Analog/Mixed-signal IC circuit blocks / IPs based on specifications (performance, area, power consumption).
• Realize IC layout with floor planning and performance considerations (with layout engineers).
• Testing & Debugging of IC prototypes (with system verification engineers).
• Support of IC to mass production ready.
• Continual support / debug of field related issues or customer IC rejects.
• IC design and performance documentation.

Requirement

• Bachelor's Degree / Master’s Degree in EEE (major in IC Design).
• Knowledge of RF/analog designs through final year project and internship are an added advantage.
• Training will be provided.

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the team

Radio System Solutions Division develops standalone RF-IC or IPs for wireless communication products within MediaTek. This involves designing and verification of building blocks such as low-noise amplifiers, power amplifiers, filters, data-converters, phase-locked loops, low-dropout regulators and digital calibration circuits in advanced semiconductor processes. We are looking for a passionate talent who always up for challenges to join us for this exciting career journey!

In MediaTek, we believe technology changes lives and a changed life can change the world.

Joint us - Tomorrow built by you.

Eigen Energy is a systems integrator for solar energy and electric vehicle charging infrastructure, with technical competencies in engineering and construction, energy management, software engineering and cross platform integration.

We are looking for a Assistant Engineer to assist with the scheduling, planning, forecasting, resourcing, and managing of technical activities to ensure project accuracy and quality. The Project Engineer is responsible for the engineering and technical disciplines of ongoing projects and will establish inspection criteria for the proper implementation of all the elements of a project.

Roles & Responsibilities

• Lead installation team to carry out solar panel installation works which include installation of solar panels on the roof, installation of solar PV inverter and connection to the existing electrical switch board
• Manage multiple solar installation projects across Singapore
• Liaise with client, contactors and internal teams to ensure ontime project delivery
• Execute project installation with the M&E shop drawings provided by engineer
• Assist with ad-hoc duties if needed

Requirement:

• Minimum 2 years of working experience in electrical engineering, solar field is preferred
• Able to read and understand M&E shop drawings
• Able to work outdoor, under the sun

5. Commissioning (Cx) Engineer – Mechanical, Data Centre MEP

Role: Supports the lead mechanical commissioning engineer by conducting tests and inspections of mechanical systems critical to data center operations.

Key Responsibilities:

Assist in the commissioning and performance testing of mechanical systems, including chillers, cooling towers, air handling units, and CRAC units.

Perform functional tests of HVAC and cooling systems, ensuring compliance with design specifications and environmental requirements for continuous operation.

Document mechanical system test results and prepare reports for the Cx Lead Engineer.

Assist in troubleshooting mechanical issues, ensuring systems are optimized for redundancy and cooling performance.

Ensure that all mechanical systems meet the data center’s performance, efficiency, and reliability standards.

Skills Required: Knowledge of HVAC and cooling systems for data centers, mechanical testing and troubleshooting skills, ability to follow detailed commissioning procedures, and attention to detail in documentation.

Commissioning (Cx) Engineer – Electrical, Data Centre MEP

Role: Supports the lead electrical commissioning engineer in performing testing and validation of electrical systems critical for data center operations.

Key Responsibilities:

Execute electrical system testing, including functional tests of UPS systems, power distribution units (PDUs), switchgear, and emergency power systems.

Document test results and assist in producing comprehensive commissioning reports for electrical systems.

Support troubleshooting efforts during commissioning to resolve any performance issues in critical power systems.

Ensure that electrical components are installed and functioning according to design specifications and operational needs of a mission-critical data center.

Work closely with the lead electrical engineer to ensure all electrical systems meet performance, safety, and redundancy standards.

Skills Required: Knowledge of electrical systems in data centers, experience with testing high-voltage and backup systems, attention to detail, and technical documentation skills.

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

Job Responsibilities

• Plan work schedule, resources (manpower, material, equipment) and execute project
• Regular communication with project stakeholders to coordinate site works
• Execute project in accordance with workplan and construction drawings with no compromise on quality and safety
• Other ad-hoc duties assigned

Job Requirements

• Degree in Civil & Structural Engineering from a University recognised by the Professional Engineers Board Singapore (PEB)
• 3 years relevant working experience
• Willing to learn and have initiative
• Competent in Microsoft Office (Word, Excel, PowerPoint)
• Interested fresh graduates may also apply; guidance will be provided

About Grab and Our Workplace

Grab is Southeast Asia's leading superapp. From getting your favourite meals delivered to helping you manage your finances and getting around town hassle-free, we've got your back with everything. In Grab, purpose gives us joy and habits build excellence, while harnessing the power of Technology and AI to deliver the mission of driving Southeast Asia forward by economically empowering everyone, with heart, hunger, honour, and humility.

Job Description

Get to Know the Team

At Grabber Technology Solutions (GTS), we are dedicated to revolutionising the technology experience for every Grabber. Our mission is to empower our Grabbers with seamless, and delightful technology solutions that enhance their daily work lives. We are a diverse team of forward-thinkers, passionate about creating personalised IT experiences that go above and beyond expectations. If you are motivated by a passion for customer-centric innovation and are, we would love to have you on our growing team to shape the future of technology at Grab. Let's build something extraordinary together!

Get to Know the Role

We are looking for an experienced Integration and automation architect to help develop the strategy, standards and guidelines to support business productivity and workflow orchestration use cases.

You will work with our Enterprise Architecture team reporting to the Head of EA and also build close relationships with application system owners, business stakeholders and engineering teams. Your work will ensure that GTS is equipped to offer sustainable technology solutions supporting outcomes with the latest technology capabilities and developments in AI and Orchestration. If you have experience delivering impactful technology solutions and are passionate about encouraging collaboration, you will offer an exciting opportunity to make a significant impact.

This role will be onsite and the office location is in Singapore.

The Critical Tasks You Will Perform

• Partner with the Orchestration and Innovation teams within GTS to develop standards and frameworks for Integration and orchestration architecture
• Develop working relationships with software vendors and engineering teams alike to gain an intimate knowledge of the technology options available for implementation.
• Work with GTS IT Partners to understand the demands coming from the business and to help frame opportunities and solution options for achieving outcomes.
• Be the Subject Matter Expert for AI and Orchestration technology capabilities in Enterprise IT.
• Partner with the Head of GTS and senior business stakeholders to ensure that technology programs align with our goals and deliver measurable outcomes.
• This will be an individual contributor role.

What Essential Skills You Will Need

• At least 10 years of experience in architecting workflow orchestration solutions on iPaaS platforms (e.g., UIPath, Workato, Mulesoft, OIC, Knime).
• Experience working with ERP solutions to develop integration and orchestration workflows
• Experience with enterprise-scale data management, including data lakes, data warehouses, and advanced analytics solutions.
• Experience designing solutions on cloud platforms.
• Track record in designing data integration architectures, pipelines, and data orchestration strategies for large-scale enterprise environments.
• Experience with data governance, privacy, and security frameworks in regulated industries.
• Experience in enterprise IT environments, including deploying and scaling Automation and Integration solutions across multiple departments and regions.
• Experience working with Enterprise Architecture tooling and frameworks, including TOGAF, ArchiMate and BPMN, for process and capability mapping.
• Capability in creating architecture artefacts such as data models, process maps, capability models, and technical reference models.
• Experience translating complex requirements into, scalable solutions that create value.

Good to have:

• Knowledge of multi-agent systems and AI solutions for enterprise workflows.
• Hands-on experience with generative AI models, especially for conversational AI.
• Experience integrating AI/ML into low-code/no-code platforms and automation systems.
• Familiarity with AI governance and compliance in enterprise settings.
• Experience designing chatbots for platforms like Microsoft Teams.
• Experience deploying AI in corporate environments, including change management and user adoption.

Additional information

Life at Grab

We care about your well-being at Grab, here are some of the global benefits we offer:

• We have your back with Term Life Insurance and comprehensive Medical Insurance.
• With GrabFlex, create a benefits package that suits your needs and aspirations.
• Celebrate moments that matter in life with loved ones through Parental and Birthday leave, and give back to your communities through Love-all-Serve-all (LASA) volunteering leave
• We have a confidential Grabber Assistance Programme to guide and uplift you and your loved ones through life's challenges.

What We Stand For at Grab

We are committed to building an inclusive and equitable workplace that enables diverse Grabbers to grow and perform at their best. As an equal opportunity employer, we consider all candidates fairly and equally regardless of nationality, ethnicity, religion, age, gender identity, sexual orientation, family commitments, physical and mental impairments or disabilities, and other attributes that make them unique.

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

As a Senior Engineer in PDE (Package Development & Engineering) at Micron, you will be responsible for the Advance Packaging success within your scope (MRDA) and guided by functional objectives, in terms of process, equipment and materials definition, development and/or optimization. You will be managing and optimizing your area's performance to meet or beat defined metrics. You will apply extensive knowledge to carry out tactics and collaborate with internal and external partners to build and implement packaging technology roadmaps aligned to corporate strategic objectives. You will provide advice to senior management related to tactical decision for the function. You will interact with executives, major customers and/or site managers to provide consultation, influence decisions and identify and resolve critical issues.

Identify, select, and evaluate new process, equipment and/or technology to support current and future requirements for MRDA area

• Define, development and establish new process, equipment design and/or capability requirements aligned to Process and Packaging Roadmap
• Develop and engage creative solution for new process, equipment capabilities and/or solution to identified constraints or future technology requirements
• Work with equipment suppliers to develop new capability
• Actively participate in Package Development Engineering activities
• Conduct equipment benchmarking to establish the equipment suppliers and platforms for current and future need
• Create decision matrix for equipment and material selection
• Generates and set-up ADC, set-up/improve recipes
• Set-up PMON, Sampling Plans, BKM, CIP Strategies & performance indicators

Installation and qualification of new equipment platform and handover to production group

• Plan/submit capital request to acquire new Equipment
• Create purchasing specification (Doc2) document
• Establish the new equipment qualification criteria and activities roadmap with respective functional team
• Establish project handover requirements and procedures upon machine qualification
• Prepare documentation for handing over with respective site owner
• Conduct data gathering for low volume production
• Conduct training for Site representatives/personnel
• Establish the feedback loop for Continuous Improvement after mass volume production

Define, improve and/or maintain a matrix of key equipment platform capability and constraints (TOR - Tool of Records) on current and new equipment platform

• Maintain and regularly update the TOR, with inputs from local or other assembly site
• Maintain general knowledge of process and material characteristics and translate to equipment design requirement
• Search continually for new equipment or suppliers with improved or new capability that is aligned to Process/Packaging need

Collaborate with production group on upgrades of existing production equipment through continuous improvement projects

• Maintain knowledge of design constraints and weakness of existing platform
• Participate in the continuous improvement projects involving equipment improvement and upgrades

Job Requirements/ Qualifications:

• Bachelor or master’s in electrical engineering, Materials Science, Chemical Engineering, or related field. A PhD is a plus.
• 4 or more years of experience with proven track record of technical leadership in semiconductor manufacturing in Metro Real-Time Defect Analysis Process & Equipment Engineering. Experience in other Front-End areas, in Post Wafer Fabrication & High Bandwidth Memory technology
• Be able to comfortably work across organizational boundaries and geographies.
• Ability to effectively collaborate with multi-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.
• Demonstrated ability to drive and implement a wide range of global initiatives with global teams.
• Organized, meticulous, and strong focus on results.
• Demonstrated ability to inspire teamwork and to effectively lead others.
• Demonstrated track record in baseline performance improvement, business process creation, process simulation techniques, data interpretation skills and proficiency in statistical analysis/method.
• Excellent analytical skills and organizational competency
• With good oral and written English communication skill
• Excellent communication skills

Keen on the role? Apply now!

Summary:

• Basic up to 6k +
• Yearly performance bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in Solidworks
• Familiar with CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in Solidworks & CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Responsibilities:

• Provide Level 2/3 network operations support
• Respond to incident calls and ensure the SLA to our clients is met
• Perform changes to the network in-line with the organization’s Change Management processes
• Ensure compliance to policies, processes and standards, both internal and clients’ organization
• Prepare network analysis reports, including findings with analysis
• Participate in regular operations review meetings, including operational issues, tickets review etc
• Participate in projects/activities to support improvement initiatives
• Conduct proper handover from the project team to operations after commissioning of projects.
• Conduct internal training and/or knowledge transfer to team.
• Update operations documentation (technical, CMDB, etc).

Requirements:

• At least 3 years of experience providing network operational and administration supporting Cisco products (Routers / Switches/WLAN)
• Diploma or Degree in Engineering, IT or its related field.
• Minimum Cisco CCNP certification
• In-depth knowledge of network routing and switching technologies and protocols
• Knowledge of network security, load balancing and optimization technologies
• Experience working with Cisco ACI, Bluecoat Proxy, F5 Load Balancer, Palo Alto or Checkpoint firewall is preferred.
• Ability to work in a multi-cultural team
• Good communication skills both written and verbal.
• Ability to prioritise work & multitask
• Analytical and possess good troubleshooting skills.
• Willing to work in extended hours and perform standby duty after office hour
• Experience in network automation via scripting (e.g. Python, Ruby) or tools (e.g. Ansible, Algosec, Chef)

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on a research project, funded by Singapore Ministry of Education (MOE), where you will be part of the research team to develop a scalable and comprehensive framework for formal verification of quantum programs. The framework consists of the following deliverables:
• Intermediate Language. We plan to develop an intermediate language to model quantum programs. The intermediate language would be complete to describe all the desired characteristics of quantum computing while at the same time simple enough to be understood by most programmers.
• Formal Verification Framework. We plan to develop a comprehensive framework to verify the correctness of quantum programs written in the proposed intermediate language.
• Mechanization. We plan to mechanize the formal framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
• Proof Automation. We plan to develop formal methods for automatic reasoning that can be materialized into commercial tools.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI) and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  1. develop an intermediate language to write quantum programs.
  2. develop a comprehensive framework to verify the correctness of quantum programs written in our intermediate language.
  3. mechanize the verification framework using state-of-the-art theorem provers such as Coq or Isabelle/HOL.
  4. develop formal methods for automatic reasoning that can be materialized into commercial tools.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of formal methods (including theorem proving and model checking, especially theorem proving), quantum computing, and software analysis/verification.
• Have a degree in computer science, computer engineering, or related areas. Possessing a Master’s or PhD degree will be advantageous
• Knowledge of separation logic and quantum program analysis/verification will be advantageous.

Key Competencies:

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges:

As quantum computers are operated in extreme physical conditions and thus the cost per run is significantly high, it is desirable to verify the correctness of a quantum programs before the execution. However, the verification task of quantum programs is challenging due to the following reasons:

• Quantum programs (even written at high-level languages) are complicated to comprehend as it requires a good understanding of quantum mechanics and the relevant advanced mathematics.
• The quantum states are exponentially huge in size because the state of a classical bit is either 0 or 1 at any time, while the state of a quantum bit (qubit) can be in the superposition, where both states 0 and 1 can co-exist simultaneously. This induces the state explosion problem for brute-force-like methods.
• Quantum states are naturally probabilistic thus may yield different results on different runs, which is challenging for the testing and debugging methods.

Summary:

• Basic up to $4500
• Variable bonus
• Location: Serangoon
• 5 days work week, 8-6pm

Key Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit
• Other related adhoc duties

Key Requirements:

• Min Diploma in Electronics Engineering
• Min 2 years of relevant work experience in electronics manufacturing indusrty

Applicants who possess relevant experience for the above responsibilities are most welcome to apply.

If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Remuneration: Basic with AWS & VB

+ $120 Transport Allowance + $66 (Flexible Benefit Allowance) + eMedical Card (cover spouse + children under 18)

Work location: MacPherson

Working hours: Monday to Friday

Job Description:

• Responsible for planning and implementing the execution of preventive and corrective programs within schedule in compliance to regulatory standards and requirements.
• Perform troubleshooting/ faut diagnosis/ failure analysis to determine cause of failure for equipment.
• Development of Standard Operating procedures (SOP) and Work Instructions (WI) to technicians to develop their competence.
• Develop and perform Risk Assessments to evaluate mitigation measures for all maintenance activities.
• Establish and maintain proper document system to achieve all jobs internally for sharing and audit purposes.
• Assist in identification, planning and reviewing of necessary training needs for mentoring and coaching of maintenance staffs.
• Preparation and write maintenance and spares consumption report.
• Perform other duties as instructed by Management.

Job Requirements:

• Degree in Maintenance Engineering or related discipline
• 2–3 years of relevant work experience
• Ability to relate work with different stakeholders
• Proficiency in Excel, Words and Powerpoint
• Able to think and work independently and as a team member in a challenging environment

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• Bachelor/master’s degree in Electrical/Electronic Engineering / Computer Science or equivalent
• With minimum 4 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms
• Strong communication skills, problem solving and analytical skills
• Candidate with more years of experience will be considered for a more Senior role.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to develop a flexible array ultrasound imaging system for velocity estimation.

Key Responsibilities:

• Participate in and manage the research project with Principal Investigator (PI), Collaborator and the research team members to ensure all project deliverables are met.
• Undertake these responsibilities in the project:
  i. To develop simulation models for flexible array ultrasound system
  ii. To develop custom phantoms for experimental studies
  iii. To design and develop non-linear signal processing algorithms including deep learning algorithms for image reconstruction
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment.

Job Requirements:

• Have relevant competence in the areas of digital electronics, signal processing, machine learning and deep learning.
• Have a B-Engg or B. Tech degree in Electronics, Computer or Biomedical Engineering with undergraduate projects related to the relevant competence mentioned.
• Knowledge of biomedical signal processing will be advantageous.
• Should have proficiency in Matlab or Python.
• Prior experience in publishing is desirable.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

Major Challenges

• Integration of flexible arrays with research ultrasound platform
• Design and development of deep learning-based flexible array adaptive image reconstruction pipeline

Duties & Responsibilities

• Coordinate with Engineering, Construction, Procurement and Project groups to review the scope of work in terms of deliverables to be submitted to the client, to finalize schedules to be met, and utilize resources required as percontract.
• Perform schedule monitoring and updating of project schedule, preparation of periodic Progress Reports with commitments & forecasts. Propose corrective actions and follow-up.
• Prepare various Weekly/Monthly Progress Reports.
• Analyse Subcontractor’s progress report, identify and highlight schedule deviations and delay.

Education Qualifications and other Requirements

• Degree with extensive Project Control experience on major projects working in a contractor environment is preferable.
• Excellence in Microsoft Excel, Microsoft Project and Primavera version 6 (and above) application is a must.
• Minimum 6 to 7 years planning & scheduling in EPC sector is a must.
• Familiar with standard software programs, developing S-Curve Schedule, bar-charts and manpower histogram is a must.

Skill Requirements

• Demonstrated success in past project involvement and technical delivery of medium to large size projects.
• Possesses wide and diversified knowledge of project control system, scheduling and planning techniques in the Oil & Gas and Petrochemical Industry, in particular EPC.
• Quality & Safety Awareness / Accountability.
• Organisational Alignment.
• Technical Skill & Work Performance.
• Teamwork (Cooperation and Coordination).
• Effective Communication.
• Integrity and Trust.