Job Description:

• Update and control of Mechanical Engineering specification,procedure and drawings in CMMS (Computerized maintenance management system).
• Register, control and maintenance of assets management in CMMS.
• Material Management including consumables,parts and spare units in CMMS.
• Respond to breakdowns, diagnosing faults, record and report in CMMS.
• Review and approve of service, repair and overhaul equipment, record and report.
• Managing staff “shift or on-call' work as necessary.
• Planning and supervising scheduled maintenance, improvement and investment works.
• Contract and evaluation of cost including technical proposal on improvement and investment works.
• Managing vendors, suppliers and contractors including performance appraisal.
• Managing staff KPI (Key Performance Indicator), appraisal and training plan.
• Ensuring compliance with machinery and equipment statutory requirements.
• Ensuring compliance with QEHS (Quality, Environment, Health and Safety) legislation.
• Managing routine 5S at the maintenance workshop, store and work area at site.
• Provide training to Supervisors and Technicians if needed.
• Responsible for maintaining and improving availability of rotating equipment across the Plant.
• Develop and ensure data quality for documents uploaded in the CMMS.
• Develop Mean Time Between Failure, Mean Time to Repair, Failure Mode Effect Analysis template for rotating equipment and implement it.
• Develop and monitor the performance of the rotating equipment.
• Deliver quick and effective technical solutions and proactively interface with other discipline leads for resolving issues.
• Identify bad actors in the plant and reliability improvement.
• Initiate the engineering management of change and execute the changes for plant improvement and modification work.
• Develop and maintain Standard Operating Procedures and Risk Assessments for the maintenance of rotating equipment.
• Planning and execution of all rotating equipment preventive and corrective maintenance.
• Condition monitoring of rotating equipment through online and offline vibration analysis, oil analysis and other techniques.
• Develop training plans for Operations & Maintenance Teams.
• Prepare estimates and budgets for rotating equipment.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group

Job Requirements:

• Degree or Diploma in Mechanical Engineering or Maintenance Reliability Engineering field.
• At least 6 years of working experience in engineering with EPC/EPCM contractors or in Operation & Maintenance in the Oil, Petrol or Chemical plant or similar.
• Knowledge in Refractory repair work is an advantage.
• Strong desire to work in a leading edge industrial environment with a strong focus on reliability and efficiency.
• Strong Verbal and written communication skills.
• Proficient in Computer Skills such as Microsoft Office, Microsoft Project, Auto Cad, CMMS, etc.
• Able to work independently and in a team to achieve departmental goal of lean production.
• Knowledge of Maintenance and Asset Management is an advantage.
• Good knowledge of industrial standards such as API, ASME etc.
• 
  

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add an Engineer, Design in Singapore. The position will be based in our Univac Site in Woodlands.

As an Engineer, Design, you will:

Responsible for product analyzing, design for manufacturing (DFM), tool design 3D and 2D drafting, tool review and debugging.

The key responsibilities are as below:

• Construct mold design layout and conduct mold design review meeting.
• Design precision plastic injection molds in accordance with the requirements.
• Mold management and liaise closely with internal and external customers on matters relating to mold design.
• Preparation of detail bill of material and maintain thorough documentation of hardcopy and softcopy.
• Participate in the First-Off Tool review and assess the suitability of the tool for production.
• Performs other duties as assigned.

What skills and experiences are we looking for?

• Possesses at least a Diploma in Mechanical, Manufacturing, Precision Engineering, and/or any equivalent engineering discipline.
• 2 years of working experience in tool design, and/or any relevant experience.
• Experience in making LSR mold design, as well as packaging mold design is an advantage.
• Proficient in AutoCAD, Unigraphics and Microsoft Office Applications.
• Familiar with engineering drawings and GD&T.
• Ability to develop complex designs to the point of manufacture and release to production.
• Knowledge of plastics & elastomers.
• Team player with a good verbal and written skills.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

For more details, please refer to our privacy policy at Personal Data Protection Policy of Venture Corporation Limited.

Job Description

• Able to read design drawings and operate generator control panel and switchgear.
• Able to plan and arrange commissioning work at site.
• Design customized power generator control circuits with PLC programming, networking, HMI and switchgear layout.
• Work closely with Service Engineers to handle factory test in workshop and commissioning at customer's site.
• Provide assistance to Sales Engineers in technical specification and attending technical meetings at customer's site.
• Able to support and troubleshoot control issues through phone and email, remotely.
• Able to coordinate with Site Engineers and Superintendents on site commissioning.
• To handle factory internal testing in workshop.
• To handle Factory Acceptance Test in workshop in the presence of customer.
• Provide technical assistance to Sales Engineers.
• Coordinate with customer for technical issues to meet customer's technical requirements.
• Able to support and troubleshoot programming issues throught remote internet/computer device.
• Monitor projects through completion, providing corrections, modifications or assistance to other department as needed.

Qualifications & Requirements

• Degree in Electrical or Engineering equivalent.
• Minimum 5 years of design experience in either power generation controls and/or electrical switchgear or automation control.
• Proven experience with low-voltage and medium-voltage switchgear design, control panel development, and power system studies.
• Proficiency in AutoCAD, E3, or other CAD tools.
• Demonstrate above-average electrical engineering skills, preferably within the power generation industry or closely related field.
• Ability to manage multiple projects simultaneously, meet deadlines, and coordinate across teams.
• Generator control knowledge is a plus.
• Strong written and verbal communication skills for creating documentation and liaising with cross-functional teams and clients.
• Excellent analytical and troubleshooting abilities to resolve complex electrical design challenges.
• Experience in PLC and HMI (touchscreen and/or IPC) programming.
• Knowledge in network communication and SCADA is a plus.
• Ability to read and interpret electrical schematics, plans, drawings, prints or similar job write-up.
• Willing to travel overseas as frequent global site visits is expected.

When you’re part of the team at Thermo Fisher Scientific, you’ll do important work. And you’ll have the opportunity for continual growth and learning in a culture that empowers your development. With revenues of more than $40 billion and the largest investment in R&D in the industry, we give our people the resources and opportunities to make significant contributions to the world.

Job Descriptions

• Assist Mass Spectrometry manufacturing by resolving technical issues.
• Mechanical, precision, or manufacturing engineering competence.
• Design tools and fixtures for process improvement.
• Maintain engineering support for Mass Spectrometry production.
• Assist the production and quality teams to improve First-Pass yield.
• Assist with engineering evaluation for component EOL and part change.
  Assistance with NPI manufacturing setup and product transfer initiatives
• Assist the quality team with field return instrument failure analysis.

Requirements

• Bachelor's Degree in Mechanical Engineering with minimum 5 years working experience, preferably in life science or biotech manufacturing environment.
• Work well within a team environment.
• Able to communicate with all levels, across functions and cross cultural.
• Strong analytical and leadership skill.

Benefits

We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation!

Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us. As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need. #StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.

Benefits
We offer competitive remuneration, annual incentive plan bonuses, healthcare, and a range of employee benefits. Thermo Fisher Scientific
offers employment with an innovative, forward-thinking organization and outstanding career and development prospects. We offer an exciting
company culture that stands for integrity, intensity, involvement, and innovation!
Our Mission is to enable our customers to make the world healthier, cleaner and safer. Watch as our colleagues explain 5 reasons to work with us.

As one team of 100,000+ colleagues, we share a common set of values - Integrity, Intensity, Innovation and Involvement - working
together to accelerate research, solve complex scientific challenges, drive technological innovation and support patients in need.
#StartYourStory at Thermo Fisher Scientific, where diverse experiences, backgrounds and perspectives are valued.
Apply today! http://jobs.thermofisher.com

With the business expansion, we're looking to hire a Singapore based Technical Sales Engineer to look after key accounts.

For this role, you will need to

• Build and maintain rapport with existing and potential clients, partners and other stakeholders.
• General sales leads and lead technical and commercial discussion.
• Attend regional marketing event/networking session.
• Gather and analyse on customers/competitors' activities/products/industry developments and compile market intelligence reports, work closely with product development team to fulfill client's requirement.
• Deliver product presentations to current and potential clients.

Job requirement

• Degree/Diploma in any field (engineering related major is preferred).
• At least 2 years of sales experience within engineering space, candidates with technical background are welcome to apply.
• Team player and independent, good communication skills.

PES is an international services company providing Project Management, Construction Management, Commissioning & Qualification and Automation services to our clients in the pharmaceutical, nutritional and related sectors.

With offices across Europe, Asia and US, our core focus is on consistently delivering high-quality outcomes for our multinational clients.

This focus, and our people's experience in delivering consistent quality results for our clients over the past 20 years has been key to our success to date.

We are currently looking for a E&I Engineer to join us on a contract role to help us deliver various projects in the Life Sciences Industry.

Key Attributes/Responsibilities

· Ensure that calibration and preventive maintenance (PM) programs are established for new instruments/equipment in the Manufacturing Unit, Laboratories, Utilities, and General Areas within COMOS, CMX, and SAP-PM by coordinating necessary information.

· Verify that vendor-executed instrument commissioning and calibration for Electrical and Instrumentation (E&I) meet site requirements.

· Update instrument data in COMOS, SAP-PM, and CMX as needed.

· Ensure successful execution of instrument calibrations and the issuance of calibration certificates in CMX, according to the project schedule.

· Provide timely and relevant input to the project team from pre-commissioning through to the end of validation.

· Participate in Electrical and Instrumentation-related troubleshooting, deviations, and root cause investigations.

· Ensure that all Electrical and Instrumentation activities comply with site-specific Work Instructions (WI) and Standard Operating Procedures (SOPs).

We are currently looking for candidates in Singapore.

If you'd like to find out about this opportunity or any other opportunity, please forward your CV to Sruthi Srikanth ([email protected]).

If you would like to find out about the latest Jobs and Projects we are involved in then do follow us on LinkedIn: https://www.linkedin.com/company/processengineeringspecialists/mycompany/

PES International operates as an equal opportunity employer. No terminology in this advert is intended to discriminate on the grounds of age, race, religion, sexual orientation or any other factors with no bearing to employment skills and we confirm that we are happy to accept applications from persons of any background for this role.

Job Description

• Prepare project management plan and its sub-plans, such as: work scope statement,
schedule plan, manpower plan, tools and equipment plan, procurement plan
• Provide engineering support in project or plant maintenance
• Coordinate internal and external audit review
• Engineering calculations associated with current carrying capacity of cables, wires,
fuses and other circuit protective devices.
• Procedures for inspection, testing and certification of electrical fixed installations.
• Industrial hazards, safety and health precautions, and environmental concerns.
• Installation practice and regulations, and relevant codes of practice.

Job Description

A Testing & Commissioning Engineer is responsible for ensuring that electrical systems and equipment are installed, tested, and commissioned according to industry standards and project specifications. The primary duties include:

• Testing and Commissioning: Conducting tests on electrical power equipment such as transformers, switchgear, circuit breakers, and protection systems to ensure they operate correctly.
• Troubleshooting: Identifying and resolving issues that arise during the testing and commissioning phases.
• Documentation: Preparing detailed reports on test results, commissioning activities, and any issues encountered.
• Compliance: Ensuring all activities comply with relevant safety standards and regulations.
• Coordination: Working closely with project managers, engineers, and other stakeholders to ensure smooth project execution.
• Training: Providing training and technical support to other team members and clients on the operation and maintenance of electrical systems.
• Continuous Improvement: Participating in continuous improvement initiatives to enhance testing and commissioning processes.

Qualifications

To be successful in this role, candidates need the following qualifications:

• Educational Background: A Bachelor's degree in Electrical Engineering or a related field.
• Experience: Proven experience in testing and commissioning electrical power equipment. At least 3-5 years of relevant experience is required.
• Technical Skills: Proficiency in using testing equipment and software, knowledge of electrical power systems, and familiarity with industry standards and regulations.
• Certifications: Relevant certifications such as Professional Engineer (PE), Certified Electrical Inspector (CEI), or other industry-specific certifications can be beneficial.
• Soft Skills: Strong analytical and problem-solving skills, excellent attention to detail, effective communication skills, and the ability to work collaboratively within a team.
• Additional Skills: Experience with specific testing equipment brands (e.g., Omicron) and knowledge of safety protocols and procedures.

Job Description:

• Involve in Site Management.
• Heading a team of site supervisors and subcontractors.
• Coordinate works, liaise with clients and consultants. Ensure overall construction progress base on schedule.
• Enforcement of quality control and safe management control.
• Keeping site staff and subcontractors informed on approved materials & latest drawings.
• Coordination of different trades on site.

Requirements:

• Diploma or Degree in Mechanical Engineering.
• Knowledge in residential & commercial building installation works.
• Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage.
• Those familiar with HDB projects will have added advantage.
• Applicants without relevant qualification must have minimum 3 years' experience in similar capacity.
• Training provided for fresh graduates with no experience.

For over 50 years, SCIEX has been developing groundbreaking technologies and solutions in mass spectrometry and capillary electrophoresis. Our products enable our customers to quickly respond to environmental hazards, better understand biomarkers relevant to disease, improve patient care in the clinic, bring relevant drugs to market faster and keep food healthier and safer. At SCIEX, you’ll find a rewarding role that amplifies your impact on the world and helps you realize life’s potential.

SCIEX is one of 10 Life Sciences companies of Danaher. Together, we accelerate the discovery, development and delivery of solutions that safeguard and improve human health.

Learn about the Danaher Business System which makes everything possible.

Are you looking to use your knowledge and experience to empower our customers to solve the most impactful analytical challenges in quantitation and characterization?

The Manufacturing Test Engineer is responsible for setting up an efficient manufacturing test process by developing procedures (automated testing) to test mass spectrometer instruments and improving First Pass Yield continuously to meet the organization objectives. You will gain new product knowledge of mass spectrometer in theory and practical as well as enhancing your technical competency in engineering fields.

This position is part of the Manufacturing Engineering Department and will be located in Marsiling Industrial Estate, Singapore.

In this role, you will have the opportunity to:

• Develop the commissioning and final tests procedures (automated testing) to meet system requirements.
• Improve and modify manufacturing test software.
• Apply Problem Solving Process to define problem statements, investigate to root causes, verify countermeasures and ensure sustainment.
• Improve the First Pass Yield and parts DPPM failures in Manufacturing.
• Assist instrument installation escalation calls in the field through site visit/remote access if required.
• Expand PCBA troubleshooting skills to detect defective Electrical/Electronics components.
• Perform First Article Evaluation of Electrical/Electronic parts and software.

The essential requirements of the job include:

• Degree in Electrical and Electronics Engineering.
• 1-2 years of experience working in ISO 13485 manufacturing environment. Fresh graduates are encouraged to apply.
• Hands on experience in using measuring equipment like digital multimeter, oscilloscope, function generators, etc. during his/her university studies.
• Understand PCBA manufacturing process, able to read the PCBA schematic diagram and perform troubleshooting.
• Good knowledge in analog and digital electronics is desired.

Travel, Motor Vehicle Record & Physical/Environment Requirements:

• Ability to travel to North America for 1-2 months during project.
• Ability to lift, move or carry equipment up to 10kg daily.

It would be a plus if you also possess previous experience in:

• IPC-610 on Printed Circuit Board Assemble manufacturing process
• Operation and Application on mass spectrometer instruments

SCIEX, a Danaher company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at danaherbenefitsinfo.com.

N/A

At Danaher we bring together science, technology and operational capabilities to accelerate the real-life impact of tomorrow’s science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. Our global teams are pioneering what’s next across Life Sciences, Diagnostics, Biotechnology and beyond. For more information, visit www.danaher.com.

At Danaher, we value diversity and the existence of similarities and differences, both visible and not, found in our workforce, workplace and throughout the markets we serve. Our associates, customers and shareholders contribute unique and different perspectives as a result of these diverse attributes.

Job Responsibilities:

• To develop E&I shop drawings based on client given information, specifications, calculations
• Able to make revisions and incorporate comments made by clients
• Make the drawings in keeping with Company standards
• To provide MTO based on drawing details
• Required to maintain all drawing files, update drawings as needed, and make corrections to drawings as directed by the Section Head/Leads
• Explain drawings to production or construction teams and provide adjustments as necessary
• Must be able to work in an environment with schedules and priorities
• Hands on knowledge on Auto-cad is essential

Job Requirements:

• Diploma/Bachelor Degree in Electrical Engineering or equivalent
• Hands on AutoCAD knowledge
• Able to work in an environment with tight schedules and priorities

Job Description:

• Develop system safety program plan, hazard analyses and risk assessment documents, safety assessment report and hazard logs based on contracted system safety and project requirements
• Facilitate system safety reviews and assessment with project system safety working groups and to facilitate and seek technical endorsement for safety assessment report with company and customer safety review boards
• Ensure system safety requirements and implementation are complied with company process and contracted requirements for projects and in-house products
• Submit monthly project status report and updates to Project Manager, System Safety Leads and Department Manager
• Support safety related administrative functions
• Conduct failure investigation and prepares reports for problems or issues based on findings from facts, research, studies and makes necessary recommendations and submits to relevant authority for approval
• Prepare and studies technical drawings, specifications of mechanical systems inclusive of engine, transmission, powerpack and driveline, and scopes of work to ensure (Maintenance, Repair and Overhaul) MRO operations conform to standards and customer requirements
• Document work procedures based on technical requirements for the MRO components
• Analyse and interpret test information to resolve repaired related problems
• Design, maintain, service and implement components so to be able to integrate into in-service systems, and interpret specifications and mechanical drawings for any re-engineering work required
• Responsible include training technicians; planning, assigning, and directing work to a group of technicians; appraising addressing complaints and resolving problems
• Appoint to be lead for a Platform to ensure the MRO Component serviceability is met at all times
• Perform literature searches on the subject area for MRO in Mechanical System especially in engine and transmission
• Assist in providing technology solutions to overcome more complex MRO systems so to allow work focuses upon the effective integration of people, processes, tools and technology in order to improve the MRO into the next level

Job Requirements:

• Degree/ Diploma in Mechanical Engineering with 2 year of working experience related to Automotive fields or MRO Services
• Certified Reliability Engineer will be an added advantage
• Able to read and understand mechanical drawings
• Possess good interpersonal skills and strong ability to work within a team
• Good interpersonal & communication skills
• Ability to present ideas, approach and objectives clearly
• Work under pressure, independent and self-motivated
• Good listener, and able to understand customers problem or question and help them solve it
• Customer orientated
• Good analytical and problem solving skills
• Good communication skills and a strong team player
• Independent, highly motivated, meticulous, resourceful and possess a positive attitude

Key Roles and Responsibilities:

Marine Vessel Maintenance & Repair

• Perform regular inspections, maintenance, and repair work on marine vessels, including engines, propulsion systems, electrical systems, and HVAC systems.
• Troubleshoot and diagnose issues with marine equipment, machinery, and systems.
• Carry out emergency repairs and provide solutions to minimize downtime and ensure the continued safety of operations

Technical Support & Problem-Solving

• Provide technical support for complex repairs, ensuring compliance with safety and environmental regulations.
• Work closely with ship crews and offshore teams to address immediate and long-term repair needs.
• Develop and implement corrective actions to improve vessel performance and reduce operational risks.

Documentation & Reporting

• Maintain accurate records of all maintenance and repair activities, includingreports on inspections, repairs, parts used, and time spent.
• Ensure all repair work complies with regulatory and industry standards and is appropriately documented for audit purposes.
• Prepare maintenance schedules and provide recommendations for necessary upgradesor replacements.

Quality Control & Safety Compliance

• Monitor the quality of repair work and ensure all maintenance activities are carried out to the highest standards.
• Ensure compliance with maritime safety and environmental regulations, including adherence to SOLAS (Safety of Life at Sea) and MARPOL (Marine Pollution) requirements.
• Conduct safety checks and recommend improvements to prevent future damage or failure.

Collaboration with Other Departments

• Work closely with the project management, procurement, and logistics teams to ensure timely delivery of parts and services required for repairs.
• Collaborate with vendors, suppliers, and manufacturers for technical support and part procurement.

Training & Development

• Provide technical guidance and training to junior engineers, technicians, and crew members on vessel repairs and maintenance.
• Stay updated with the latest developments in marine engineering technology, repair techniques, and industry standards.

Qualifications & Requirements:

• Bachelor's degree or diploma in Marine Engineering, Mechanical Engineering, or a related field.
• Minimum of 3-5 years of experience in marine repair, maintenance, and troubleshooting of marine vessels.
• In-depth knowledge of marine systems such as propulsion, electrical, mechanical, and safety equipment.
• Stron understanding of maritime safety regulations and industry standards.
• Ability to read and interpret technical drawings and manuals.
• Strong problem-solving and troubleshooting skills.
• Good communication skills and the ability to work in a team environment.
• Must be willing to work offshore or in dry docks if required.
• Certification in marine safety and repair procedures (e.g., STCW, Basic Safety Training) is a plus.

Benefits:

• Competitive salary and benefits package
• Opportunities for career advancement and professional development
• A dynamic and supportive work environment

If you are passionate about marine engineering and have the skills to ensure the safe and efficient operation of marine vessels, we would love to hear from you. Apply today!

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

COMPANY DESCRIPTION

1-Net manages carrier-neutral Internet Data Centers, along with providing a comprehensive range of integrated services including network connectivity, managed services, work area recovery suite, cloud and media delivery services. 1-Net's Data Center Corridor initiative currently interconnects key data centers in Singapore to facilities quick deployment and providing a diverse connectivity options for enterprises and service providers.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

1-Net is fast transforming itself into Asia's Data Centre of Choice. As one of the pioneers in broadband development in Singapore, 1-Net currently manages telco-class carrier-neutral Internet Data Centres, along with providing domestic and international connectivity, managed services and media delivery services. 1-Net offers superior stability, secure delivery and service experience through its services. It's uniquely positioned in Southeast Asia, with a comprehensive range of integrated services and a media-centric approach to bring cutting edge solutions to its customers.

Responsibilities

• Manage the maintenance and daily operations of the DC facilities with the objective of achieving uninterrupted availability at all times and to ensure the fulfillment of our service commitment to customers.
• Support service delivery to ensure contracted service level agreements and key performance indicators are met or exceeded.
• Perform routine facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, HVAC outages. Analyze data and identify trends with facility issues to determine root cause and take appropriate action.
• Respond to BMS/EMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects of data center operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 data center operation to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Support for customer installations, in coordination with the design & construction as well as operations requirements to coordinate customer move-in and turn-on, and other service request & deliveries.
• Maintain compliance with local workplace safety & health (WHS) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP), method of procedures (MOP), and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participate in the scheduling, coordination and completion all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Support various accreditation, certification and compliance initiatives such as BCA-IDA Green Mark DC/QMS/ISMS/BCMS/PCIDSS/OSPAR, etc as may be required.

• ITE/Diploma in Electrical or Mechanical engineering or equivalent qualification
• No experience required as training will be provided
• Must be willing to learn
• Able to resonate with our culture of Respect, Teamwork, Drive
• 24x7 rotating shift duty
• Able to comprehend, analyse and interpret complex project documents, including AutoCAD, Visio and PDF documents
• General technical and functional knowledge of data center infrastructure to include electrical and mechanical systems, fire detection and protection systems, building management systems, equipment maintenance, space planning, construction of critical facilities environment
• Working location: 1-Net (East) at Chai Chee / 1-Net (North) Woodlands

Job Description & Requirements

You will be part of an innovative and passionate team, working towards the one ultimate goal of producing high quality software. Your primary duties are design, prepare technical specifications, lead a team of developers, programming, unit-testing, and analytical problem-solving; but may include support for products implementation, integration testing and documentation.

The individual will:

• Responsible for the successful enhancement of software products and solutions by co-operating with other teams to ensure releases that are coordinated in terms of both time and technology.
• Design system architecture; translate user's requirements into functional and technical specifications.
• Participate and manage testing, debugging, verifying design and conduct reviews.· Participate and manage data and solution migration.
• Assist pre-sale in architect technical solution.
• To perform other duties as and when required.

Skills Requirements

• Degree in Computer Science or Information Technology or equivalent.
• In-depth experience in Java
• Working knowledge of Object-Oriented
• Working knowledge on any web framework, with understand MVC concept on the web-based application
• Working knowledge on conceptualizing and designing web-based application
• Preferable knowledge and experience in Spring and Hibernate Framework, Spring Boot, REST, Drools, HTML5, Oracle.
• Possess a passion in software engineering/development, with drives to be an effective team leader
• Ability to communicate effectively and clearly
• He or she should show self-initiative in learning, and self-development
• Ability to work under pressure to deliver projects within the designated deadlines.
• At least 2 to 5 years of relevant experience

#TeSA #TMCA

• Provide advanced manufacturing electrical and controls expertise in leading detailed and comprehensive planning for conceptualization, specification, development and implementation of right-sized manufacturing and facility equipment.
• Manage electrical and control portions of capital equipment expenditures that support new product designs, factory capacity or efficiency additions.
• Manage multiple projects and/or provide leadership for larger equipment control projects.
• Must be able to analyse needs and determine best electrical & instrumentations recommendations for equipment / process to optimize cost & performance.
• Able to select the right-sized equipment, workstation design, material presentation, standard work and single piece flow. Use data and statistics to characterize delivered manufacturing process capabilities in qualifying the release of processes and equipment
• Able to design panel (HMI, PLC, RIO) and provide line drawing according to client needs.
• Able to perform IQ/OQ test during commissioning.
• Able to perform costing base on selected instrument or given drawing.
• Automation knowledge.
• Identify and resolve operational problems and minimise delays.
• Select, guide and develop a team of project member with operational responsibilities to ensure that the organisation achieves it business objectives and complies with all relevant regulations and laws.
• Ensure that organisation and government standards on safety are met.
• Ensure that customer quality specifications are constantly met.
• Allocate capital and human resources to maximise productivity.
• Supervise and implement project expense, other assets and resource within budget.
• Provide guidance to junior and perform any tasks or duties as assigned by Management.
• You will oversee the safety and job/project operation.
• Ensure job completed and hand over on schedule.
• You will be attending safety or projects meeting.

Mechanical Contractor - Construction

• Basic: $4000 - $5000
• Variable Bonus
• 5 days (Office Hours)
• Location: Pioneer

Responsibilities:

• Work with Process team on in-process audit and FQC Audit.
• Work with Process Engineer & Engineering team on QC requirements
• Contriol of Supplier QUality Assurance (SQA).
• Quality Control of in-coming, in-process and out-going products.
• Prepare and compile report after inspection.
• Plan on construction site visit and liaise with Project Managers or Engineers.

Requirements:

• Min. IT in Manufacturing or Quality Engineering with 1 year of relevant experience.
• Knowledge of IS0 9001, 14001, 13485 & 45001
• Ability to understand DfMA modular prefab requirements, including materials selection and fabrication.

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23116143 | Lucky Lee

1.Min. 10 years experience in engineering, maintenance and project execution in controls, electrical and instrumentation in Oil & Gas and Petrochemical Industries.Knowledgeable in DCS, SCADA, IPS, PLC, Interlock Logic Diagrams, Instrumentation Loop Drawings, Electrical Drawings, P&IDs.Competent in handling Honeywell (EPKS) Experion PKS (including back-up restore, HMI Web Builder, PAS Plant State Suite Alarm Management System, Corworx Software and Maximo/SAP.

Deliver all assigned C&N activities in a cost-effective, safe and efficient manner through contractors with minimum interruption to operating plant and ensure field work sequences are aligned,

Lead contractors in field activities with high safety standards; ensure all field activities comply with authorities, industrial and company HSE standards and requirements.

Organize and chair risk assessments discussions to ensure hazard are identified and mitigated for all C&N assigned activities.

Collaborate with stakeholders, coordinates reviews and schedule optimizations, resource leveling etc. and prompt updates to the C&N Work Plan.

Provide conceptual ideas for field route piping and produce quality sketches, Check accuracy of approved construction drawing and documentation for execution. Carry out mechanical line and equipment checks, able to coordinate Civil and E&I activities progress, Support Construability reviews for Projects.

Conduct site inspection and explain work requirements to contractors; develop work plan with contractors, operations, maintenance, and other stakeholders for execution with minimum interruption to operating plant and ensure field work sequences are aligned. Able to coordinate with multi-disciplines during field execution.

Drive Contractors management to deliver contractors productivity improvements, contractors’ competency & assurance, including developing relevant work procedures and QA/QC. Accept or reject the quality of work & goods provided by contractors/vendors.

Establish time schedule/execution plan for more complex project with multi-disciplinary involvement amongst operations, maintenance, and contractors. Approval of construction related method statements.

Prepare and deliver weekly works & field progress report. Support computation and calculation of progress measurement, monitor work progress and able to provide schedule catch-up plan. Validate field work quotations and value of work done (VOWD)

Executes the Quality Assurance and Control Plan and Project Specifications. Reviews and approves Inspection Test Plan (ITP) according to Shell HSSE, Technical, and Process Safety Standards, and relevant industry code.

Perform as Permit Requestor (PR) and Authorized Engineer (AE), including for lifting works, as per SJI Permit to Work (PTW) requirement

Organize Mechanical Completion review and assist in operation readiness review for project handing over.

Carry out any other related duties as required, including temporary assignments in other sections within the MTAC department on site.

Educational Qualifications:

· Diploma/ Degree in Mechanical Engineering

Technical Qualifications:

· NACE Coating Inspector Level 2 (Validity Required)

· Qualified MOM OPSOC (Supervisor) or equivalent

· Qualified MOM CSOC (Supervisor) or equivalent

· Qualified MOM Manhole Supervisor

· Qualified MOM Confined Space Safety Assessor

· Qualified MOM Lifting Supervisor and Rigger/Signalman

· Qualified Work at Height Assessor

Professional Experience:

· Minimum 10 years of relevant experience in oil & gas, chemical & petrochemical industry in the below fields.

o Piping/Pipeline Construction, inspection and maintenance

o Tank maintenance

o Application of Protective Coatings (Organic Coatings, Thermal Spray Aluminum)

o Installation and maintenance of Insulation systems.

· Experience in Plant Turnaround Project planning, preparation and execution

· Experience with catalyst change out is a bonus.

Job Description & Requirements

• Responsible to the Principal Engineer, Piping for the preparation of design as per codes / standards and client’s specifications, requisitions for materials, equipment, valves, etc., and for the timely completion of each planned engineering activity assigned to him / her.
• Review of piping specification.
• Review piping stress analysis calculation.
• Review and finalize of piping routing, piping arrangement and support.
• Review design data for missing and / or ambiguities information.
• Reporting project progress to Principal Engineer, Piping on a weekly basis.
• Implementation of Engineering Procedure, drafting Standards and Quality Management.
• Preparation of proposals / estimations for equipment and tankage works.
• Review engineering calculation and technical specifications of storage tanks, pressure vessels and various mechanical equipment.
• Evaluate vendor’s bids and highlight deviations and omissions to purchasing for further clarifications with vendor.
• Perform any other responsibilities as directed by immediate supervisor.

Qualification & Experience generally required

• Bachelor Degree in Engineering.
• Min 8 years relevant working experience in Mechanical engineering in oil and gas sector or offshore sector.
• Know to use spring hanger in stress analysis.
• Proficient in Microsoft Office products, AutoCAD and Caesar ll Stress Analysis Software.
• Prefer to have at least 5 year of piping engineering related working experience.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Job Summary:

The Process Safety Engineer is responsible for ensuring that all processes within the facility comply with safety regulations and standards. This role involves identifying, evaluating, and mitigating risks associated with hazardous processes to protect personnel, assets, and the environment. The engineer works closely with multidisciplinary teams to implement safety systems, conduct hazard analyses, and ensure compliance with industry best practices and regulatory requirements.

Key Responsibilities:

1. Process Safety Management (PSM):Develop, implement, and maintain the facility’s PSM program in line with local and international standards (e.g., OSHA PSM, API, IEC 61511).
   Perform regular audits and reviews of safety management systems.
   
2. Risk Assessment and Hazard Analysis:Conduct and facilitate risk assessments such as HAZID, HAZOP, LOPA, and SIL assessments.
   Analyze process safety incidents and near misses to identify root causes and corrective actions.
   Implement and maintain risk control measures.
   
3. Safety Design and Systems:Ensure the design and operation of safety-critical equipment meet safety requirements.
   Specify, evaluate, and test safety instrumented systems (SIS) and emergency shutdown systems (ESD).
   Provide input on process design reviews to ensure inherent safety principles are applied.
   
4. Compliance and Standards:Ensure compliance with applicable safety standards, codes, and regulations.
   Prepare and submit required safety documentation and reports to regulatory bodies.
   Liaise with government agencies, certification bodies, and auditors as needed.
   
5. Emergency Response Planning:Support the development of emergency response plans and procedures.
   Conduct process safety drills and training sessions for staff.
   
6. Training and Development:Provide training to operations and maintenance personnel on process safety concepts and best practices.
   Promote a strong safety culture within the organization.
   
7. Incident Investigation:Lead or support investigations into process-related incidents.
   Develop and implement corrective and preventive actions to mitigate future risks.
   
8. Collaboration and Communication:Work closely with operations, maintenance, engineering, and project teams to ensure process safety is integrated into all activities.
   Provide technical guidance on process safety issues.
   

Key Requirements:

Qualifications:

• Bachelor's degree in Chemical Engineering, Mechanical Engineering, or a related field.
• Advanced certifications in process safety (e.g., CCPS Process Safety Professional Certification, NEBOSH Process Safety Management) are a plus.

Experience:

• Minimum 10 years of experience in process safety engineering within the oil and gas industry, ideally with FPSO, refinery, or petrochemical exposure.
• Proven track record of implementing process safety programs and conducting risk assessments.

Technical Skills:

• Strong knowledge of process safety management frameworks and standards (e.g., OSHA PSM, API, IEC 61508/61511).
• Proficiency in process hazard analysis tools such as PHAST, PHA-Pro, or BowTie XP.
• Familiarity with safety design concepts, such as flare systems, relief valves, and blowdown systems.
• Understanding of fire and gas detection systems, ESD, and SIL verification.

Soft Skills:

• Excellent analytical and problem-solving skills.
• Strong communication and interpersonal skills for cross-functional collaboration.
• Attention to detail and ability to manage multiple priorities effectively.

Preferred:

• Experience working on offshore or FPSO projects.
• Familiarity with environmental regulations and sustainability practices in the oil and gas sector.

Job Description:

• Involve in Site Management.
• Heading a team of site supervisors and subcontractors.
• Coordinate works, liaise with clients and consultants.
• Ensure overall construction progress base on schedule.
• Enforcement of quality control and safe management control.
• Keeping site staff and subcontractors informed on approved materials & latest drawings.
• Coordination of different trades on site.

Requirements:

• Diploma or Degree in Mechanical Engineering.
• Knowledge in residential & commercial building installation works.
• Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage.
• Those familiar with HDB projects will have added advantage.
• Applicants without relevant qualification must have minimum 3 years' experience in similar capacity.
• Training provided for fresh graduates with no experience.

Job Description:

• Involve in Site Management.
• Heading a team of site supervisors and subcontractors.
• Coordinate works, liaise with clients and consultants. Ensure overall construction progress base on schedule.
• Enforcement of quality control and safe management control.
• Keeping site staff and subcontractors informed on approved materials & latest drawings.
• Coordination of different trades on site.

Requirements:

• Diploma or Degree in Electrical Engineering.
• Knowledge in residential & commercial building installation works.
• Knowledge in design skills and usage of AutoCAD/ Revit will have added advantage.
• Those familiar with HDB projects will have added advantage.
• Applicants without relevant qualification must have minimum 2 years' experience in similar capacity.
• Training provided for fresh graduates with no experience.