JOB DESCRIPTION

· Work on SoC architecture discussion and optimization with architect; SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Work on SoC floorplan with architect and APR; SoC power check; SoC timing constraints and review support; SoC DFT support; SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Experience with ASIC design flow

· Experience in RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure and verification

· Good understanding of DFT

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

JOB DESCRIPTION

· Understand the product requirement and create SOC system level architecture according to the requirement.

· Understand the use case and create system level test plan.

· Define design specification for new hardware modules, together with IC design engineer.

· Work with IC design engineers to resolve the issues during design phase and qualify the design.

· Understand the design specification of existing hardware modules and make improvement.

· Perform FPGA validation before tape out and silicon verification after tape out

· Provide support for any issue reported from customer.

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with firmware development experience Familiar with SOC design, including bus architecture, memory sub-system, video signal processing, etc.

· Familiar with standard peripherals, such as UART, I2C, SPI, I2S, PWM, SD, flash controller, etc

· Familiar with IC design activities, such as RTL coding, timing analysis, etc.

· Familiar with lab equipment

· Knowledge in WIFI/Bluetooth physical layer or MAC operation is an advantage.

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

About Innowave Tech

Innowave Tech: MANUFACTURING SIMPLIFIED

Innowave Tech is a leading AI solution provider in the semiconductor industry, specializing in developing cutting-edge technologies for innovation and efficiency. Our focus is on computer vision and large-scale data analytics to meet the complex needs of our clients in the advanced manufacturing and semiconductor industry.

Job Description:

As a Data Engineer Intern (Equipment Health Analytics), you will develop data architecture and infrastructure for industrial IoT data. You will collaborate with cross-functional teams to build and maintain scalable and reliable data storage and data pipeline. This role offers a unique opportunity to work with innovative technologies and make a meaningful impact in a fast-evolving industry and is ideal for candidates with strong data engineering skills and interest in AI applications.

Key Responsibilities:

1. Design and implement multi-tenant data architecture for equipment sensor data.

2. Implement and maintain storage solutions across cloud and on-premises systems.

3. Build data quality validation frameworks and metadata management systems.

4. Document technical processes and data flows.

Requirements / Qualifications:

· Minimum Poly, Bachelor’s, or Master’s degree in Data Engineering, Computer Science, or related field.

· Self-motivated learner who quickly adapts to new tools and technologies.

· Strong problem solver with proven ability to complete complex tasks.

· Detail-oriented with high standards for work quality.

· Excellent communicator and team collaborator.

· Internship duration should be at least 3 months full time.

· Resume should indicate your forecasted internship dates.

Required Skill Sets:

· Python programming

· SQL and NoSQL databases

· Message queues or Redis

· Storage solutions: Cloud (Azure Blob, AWS S3) or On-premises (Ceph, MinIO)

· Data lake concepts and implementations

· Linux shell scripting and system administration

· Knowledge of the following is a plus:

- IoT data and manufacturing processes

- Basic understanding of data security principles

- Familiarity with DevOps practices

Screening questions:

• The intended internship period will be during your course of study?

• Are you students pursuing Computer Science disciplines?

• Are you able to commit for more than 3 months?

Outcome of Technical Skills and Competencies that Intern will learn:

· To identify and translate business and technical requirements into data architectures.

· To develop proficiency and practical experience in cloud and on-premises storage solutions.

· To build and maintain data pipelines while documenting technical processes and data flows effectively.

· To gain hands-on experience with tools and system administration for data engineering tasks.

· To collaborate effectively with stakeholders while adapting to new technologies and solving complex data engineering problems within deadlines.

Executive Summary

Smart IMS Inc provides Digital technology & Cloud transformation services, Application & Infrastructure Management Services, Unified Communications and Insurance implementation services to customers across the Americas, Europe, Middle East, and Asia-Pacific regions. As the trusted technology and business partner of leading MNCs, including Global Investment Banks, Smart IMS is also a Microsoft Gold Certified Partner, Oracle Platinum Partner and AWS MSP Partner.

We are looking to hire a Firewall Engineer to support our client in Singapore which is a top global investment bank.

Job Description:

Leads and/or participates in the design, development, and implementation of complex system engineering activities involving cross-functional technical support, systems programming and data center capabilities. Responsible for components of highly complex engineering and/or analytical tasks and activities. Establishes input/output processes and working parameters for hardware/software compatibility, coordination of subsystems design, and integration of total system. Viewed as a technology subject matter expert; able to provide and communicate complex technology solutions across differing audiences including technical, managerial, business executives, and/or vendors. Will have responsibility for multiple, complex projects; will direct activities of teams related to special initiatives or operations and may have direct reports. Leads the resolution process for complex problems where analysis of situations or data requires an in-depth evaluation of various factors. Exercises judgment within broadly defined practices and policies in selecting methods, techniques, and evaluation criterion for obtaining results. Information Technology degree and/or technology certifications preferred or substantial equivalent experience. Typically 7-10 years of IT experience

Required Skills:

• Minimum 8-10 years of hands-on experience with large scale, complex network/DMZ environments preferably in the banking and finance industry.

• Strong analytical and technical skills with proven experience in network DMZ security technologies especially Firewall, IDS/IPS, Web Content Filtering & Load Balancer technologies.

• 5 years or more experience with deep understanding in Firewall technologies – Fortinet, CheckPoint, etc vendor platform & IDS/IPS technologies.

• 5 years or more experience in Web Content Filtering technologies – Bluecoat, McAfee proxy etc vendor platform.

• Advanced networking troubleshooting and knowledge of web connectivity and protocols (PAC files, TCP/IP, HTTP, HTTPS, SSL, FTP, Socks, etc.).

• Strong knowledge of networking communication principles, network standards, and network security practices.

• Expertise in creating Application and network diagrams including all pertinent flows and decisions.

• Capability to summarize complex issues into executive summaries.

• Proven leadership experience, ability to motivate teams and drive execution, with performance driven with the necessary intensity and optimism to succeed and deliver.

• Possesses strong analytical skills and root cause investigation techniques with a desire to expand horizon to next-gen products, applications and technology.

• Familiar with product deployments within a global banking environment.

• Willing to work some irregular hours based on the needs of global operating model and the location of clients.

• Understanding in Automation (Python, Ansible etc).

• Communicate with business partners at an enterprise level; interfacing with internal business representatives and information security partners.

• Strong analytical skills with ability to identify gaps, challenge others with positive intent, and drive debate towards identification and remediation of underlying risks.

• Knowledge of regulatory risk management in Technology and Information Security domains preferred.

• ITIL processes knowledge: Change Management, Incident Management, Request Management, and Problem Management. ITIL certification preferred.

• At least one professional level certification in Network Security [ CheckPoint/Fortinet, CCIE, CISSP, etc] is desirable.

• Educated to degree level in IT/Engineering field.

What you can expect

The APAC Network DMZ Services team is responsible for end to end engineering and deployment of DMZ services within the bank. Team provides end-to-end network security infrastructure solutions for internal clients, lines of business and external 3rd parties.

The candidate be part of a regional team and be responsible for working with stakeholders to deliver connectivity that balances business, security, availability and resiliency requirements across Network Security technologies and serves as 3rd level escalation for operational issues.

What you will do :

• Be accountable for end to end engineering and deployment of DMZ services within APAC region, serving as the escalation point of contact to senior leaders.

• Responsible for hands-on implementation, configuration of devices and engineering new services into production.

• Ensure security controls are implemented and operating effectively as part of solutions delivery.

• Create designs based on industry best practices, engineering standards and security principles.

• Manage a wide variety of DMZ technology infrastructure and business aligned initiatives.

• Collaborate with Product managers, global engineering domain leads and operations teams from service design through operations transition process for new services.

• Understanding the design/purpose of each application or infrastructure project, defining resource requirements to efficiently collaborate across other technology technical teams to deliver high visibility projects.

• Ensuring documentation is updated to reflect new additions to or modifications in the environment and handed into Operations successfully.

• Identifying and managing the mitigation of risks within the environment.

• Liaise with Information Security partners to enforce compliance with standards.

• Support activities related to Audit, Compliance Reviews & Regulatory Exams.

• Review of all capacity metrics to ensure availability of all services.

• Facilitate meetings among all stakeholders/ vendors regularly and produce status update reports periodically.

• Implement software development/support for automated computer vision equipment.
• Participate in Software Development Life Cycle.

Requirements:

• Diploma in Engineering
• At least 2 years of working experience in Visual Studio Development Environment.
• Good understanding of automated Computer Vision equipment, image procession automatic

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Perform system performance test and evaluation and customer qualification focusing on vision inspection system.
• Evaluating and establishing vision system performance specifications.

Requirements:

• Diploma in engineering discipline
• At least 1 year of field servicing experience in semiconductor industry
• PC hardware, OS and networking knowledge

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

JOB DESCRIPTION

· Wireless AP software development and firmware development

· Network communication protocol development

· Embedded system development

· Execution of pre-test for IoT/ Wi-Fi router related certification

JOB REQUIREMENTS

· Bachelor’s Degree or above in Computer Science, Computer Engineering, Electronic, Telecommunication or Networking Engineering

· Familiar with C/C++ and Linux system

· Familiar with networking and embedded system development

· WiFi development experience is an advantage

· Good communication and team working skills

· Good problem solver, ability to think out of the box

· Passion in programming is an advantage

JOB DESCRIPTION

• CP test program development.
• Work with designer to develop test programs, debug programs, solve problems.
• Work with commissioned factory to identify, propose, prioritize and implement test automations.
• Design automated test scenarios accordingly to test plan with its acceptance criteria
• The commissioned testing factory product management.
• Test plant test plan management. Ex: prepare test environment, test data, update functional test scripts according to changing requirements
• Contribute towards continuous improvement of testing practices/tools to improve test strategy and efficiency
• Help to ensure every release happens in a timely manner with a high level of quality.

JOB REQUIREMENTS

• Bachelor’s/ Master’s degree in Electronical Engineering ,Computer Science, Software Engineering or other equivalent degree/experience
• Strong VBT scripting skill and C++ programming background
• Good written and verbal communication skills in English and Mandarin is required to liaise with Chinese associates/clients
• Able to work well both independently as well as in a team
• Singaporeans are welcome to apply

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

JOB DESCRIPTION

· Understanding of the customer requirements and developing technical solutions for customers.

· Strong collaboration with several stockholders including customer, sales and marketing, RD team.

· Support customers during the all development cycle from design specification until mass production.

· Exposure to schematics and PCB layout design review.

· Direct contact with customers implies excellent communication skills.

JOB REQUIREMENTS

· Bachelor’s degree or above in Electronic Engineering or related majors

· Min 3-5 years of relevant work experience in semiconductor

. Must has outstanding hardware and RF bring-up experience for WLAN + BT combo, as well as best expertise of OFDM/OFDMA, MIMO, RF component knowledge and front-end matching.

. Proficient with multiple tools for board design, such as OrCAD, Allegro, impedance calculation, ADS simulation and other RF/digital simulation on board level.

. Strong communication and interpersonal skills to handle whole board design process, debug critical issue, optimize RF matching, decent documentation technique.

· Familiar with Litepoint IQxel tester, R&S CMW tester, spectrum analyzer, signal generator, network analyzer, power meter, attenuator, and other WLAN/BT test equipment is an advantage.

· Strong customer management and problem-solving skills

· Good communication and team working skills

· Singaporeans are welcome to apply

The Senior Data Center Planning & Development Engineer, APAC plays a strategic role in the execution of EdgeConneX’s global expansion plans. The position requires a blend of analytical, creative thinking, and relationship building skills to assess opportunities and develop recommendations that align with the Company’s growth objectives. The successful candidate will manage and drive the Engineering for new locations and provide technical advice as a subject matter expert to facilitate Executive Management’s decision-making on large-scale projects in support of EdgeConneX’s Regional expansion plans.

An industrious go-getter, the Senior Data Center Planning & Development Engineer, APAC will work with EdgeConneX’s Real Estate, Site Development, and Engineering to advise on technical aspects of various potential projects and support critical development activities such as power, entitlement, permitting, concept designs, and budgeting. The job’s duties will include visiting new properties under consideration and in due diligence to determine their environmental and physical qualities, identify technical difficulties that a buildout on that property may encounter, assess development risks, and recommend mitigating strategies -- often preparing and presenting Property Development Plans. The ideal candidate must be a quick, critical thinker with great project management skills, substantial technical knowledge, and possess an extensive network of contractors, consultants, and other resources that would make it possible to get properties development and construction ready quickly and efficiently. This position will report to the Director of Design Engineering.

Primary Responsibilities

• Identify Project Risks and Mitigating strategies.

• Compile and present reports explaining project details to non-technical stakeholders

• Support discussions with local and regional authorities and government bodies.

• Develop initial Project Schedules and support initial Budgeting estimates.

• Report on project status, risk, and progress.

• Identify and leverage Contractor and Partner networks in Market and in Region that can help expedite new developments.

• Prepare high-level Project Development Plans that chart and identify critical activities through designing, building, and operating Data Center facilities on site.

Knowledge, Skills & Abilities

• Self-starter with positive attitude and strong emotional intelligence. Ability to operate independently with limited supervision and feedback, and to build strong, collaborative relationships across all company functions.

• Ability to lead, inspire, and motivate a team of development professionals that includes VPs, Directors, and Managers in a fast-paced environment, to manage stakeholders effectively, and to align stakeholders to the organization’s needs.

• Demonstrates strong interpersonal and communication skills to cultivate and maintain positive relationships with internal and external stakeholders.

• Superb time management and organizational skills with ability to prioritize and manage multiple projects, its people, and the host of responsibilities that come with it.

• Ability to thrive in a fast-paced, dynamic environment with shifting priorities and unexpected obstacles, and to remain flexible, resilient, and resourceful in the face of uncertainty and ambiguity.

• Commitment to professional development and organizational excellence. Constant awareness to seek opportunities to improve processes/quality of deliverables.

• Attention to detail.

• Executive-level presentations skills, both writing and presenting. Proficient knowledge of computer environment including Microsoft applications such as Microsoft Word, PowerPoint, and Excel.

• Value ongoing professional growth and development, staying updated on industry best practices, emerging technologies, and regulatory changes. Seek out learning opportunities, acquire new skills, and adapt to advancements in the construction field.

Experience/Education

• 5+ years of relevant Construction and Development experience.

• Bachelor’s or Master’s degree in Architectural, Civil Engineering, or MEP, with Development background required.

• Thorough Understanding of Electrical & Mechanical Systems in a Data Center will help you succeed in this role.

• Candidates with strong knowledge and experience in hyperscale data center design and construction, and those with experience in Data Center Development, Industrial Construction, and/or the Telecommunication industry are highly encouraged to apply.

Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

We are looking for Data Engineer to support our project in Singapore. This is a 2 year contract role.

The Data Engineer will support the development and maintenance of the global AI sandbox, development of cutting-edge AI solutions, R&D, and provide technical guidance and support in the data domain to the teams under incubation that develop AI Products.

The role requires a strong technical background in Data Engineering, AI, and modern Cloud infrastructure, excellent technical skills, and the ability to collaborate with both internal and external stakeholders across technology, AI, and business to deliver impactful AI products. The Data Engineer will work on the delivery of high-quality data infrastructure, continuous improvement, and experimentation, and development of the company’s data expertise.

Key Responsibilities:

In this role, you will be an active member of the AI Lab, playing the role of Data Engineer to support the implementation of solutions built in AI labs:

• Build data pipelines to bring in wide variety of data from multiple sources within the organization as well as from relevant 3rd party sources.
• Collaborate with cross functional teams to source data and make it available for downstream consumption.
• Work with the team to provide an effective solution design to meet business needs.
• Ensure regular communication with key stakeholders, understand any key concerns in how the initiative is being delivered or any risks/issues that have either not yet been identified or are not being progressed.
• Ensure timelines (milestones, decisions, and delivery) are managed and value of initiative is achieved, without compromising quality and within budget.
• Ensure an appropriate and coordinated communications plan is in place for initiative execution and delivery, both internal and external.

Qualifications:

• Strong technical background in data, AI, and modern cloud infrastructure.
• Excellent programming skills in languages such as Python, SQL.
• Experience with Cloud Infra providers like Azure data bricks, Google cloud platform or AWS
• Experience in building data pipelines using batch processing with Apache Spark (Spark SQL, Dataset / Dataframe API) or Hive query language (HQL)
• Knowledge of Big data ETL processing tools
• Experience with Hive and Hadoop file formats (Avro / Parquet / ORC)
• Basic knowledge of scripting (shell / bash)
• Experience of working with multiple data sources including relational databases (SQL Server / Oracle / DB2 / Netezza), NoSQL / document databases, flat files
• Basic understanding of CI CD tools such as Jenkins, JIRA, Bitbucket, Artifactory, Bamboo and Azure Dev-ops.
• Basic understanding of DevOps practices using Git version control
• Ability to debug, fine tune and optimize large scale data processing jobs

Argyll Scott Consulting Pte Ltd

Job Description:

• Ensure the smooth operation of MES software and its integration with ERP systems
• Identifying opportunities for process improvement and optimisation
• Monitoring, supporting, and ensuring maintenance and documentation of the MES model in terms of products, routes, operations, equipment, recipes, and lot movements
• Participating in MES-related projects, including project planning, resource allocation, and progress tracking, to ensure successful project delivery within scope, budget, and timeline constraints
• Assist in the planning, implementation and administration of M365 services such as MS Power Automate, PowerBI, SharePoint Online, Teams, Intune, OneDrive and other components
• Support in the conception and implementation up to the introduction of the projects in all phases for a sustainable operation, including Cloud projects
• Further development of our Digital Workplace vision
• Any ad hoc duties assigned by supervisor/manager

Job Requirements:

• Min Bachelor/Diploma in IT with extensive hands-on experience in the area Automation and MES implementation
• Minimum 3 years hands on with MES software platforms implementation and support

Interested candidates do attach your resume to [email protected]

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

RESPONSIBILITIES

• Prepare and review key project documentation in executing the complete scope of piping engineering work as per the project requirements.
• Familiar with offshore piping materials, stress engineering, platforms and FPSO layout design, material handling and pipe support design.
• Conduct 3d Model reviews as per project requirements.
• Experience in piping standards, creating MTOs.
• Ensure that technical compliance with all design requirements is met.
• Prepare and review detailed calculations, analysis, and solutions to deliver safe, secure, and fully functional facilities.
• Interface with Client’s Engineering team to resolve the technical issues.
• Effectively manage design changes and provide optimized solutions during project executions.
• Review and management of project general specifications, engineering procedures and policies.
• Provide work progress reports.
• Accountable for the quality engineering deliverables.
• Provide engineering guidance to Contractors wherever required.
• Achieve safety standards as defined in Project requirements.
• To achieve project completion to the project specifications on schedule.
• Support project planning as necessary.
• Field Engineering support during construction phase of the project.
• Coordinate with class for surveys and reviews related to shipyard work.
• Coordinate with internal and external parties for monitoring and controls.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Minimum educational requirements of a Bachelor’s and/or Masters’ degree in mechanical/materials engineering.
• Direct experience as a lead piping engineer working on FPSO projects.
• Minimum 15 years’ experience, with Oil & Gas projects (fixed installations and FPSOs), with significant experience working as a Senior or Lead Engineer.
• Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector, in a similar role and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Shall be skilled with commonly used business software applications such MS Office, MS project and drafting software such as AutoCad and ed modelling software such as PDMS.
• Shall be capable of supporting the development and implementing recommendations from third party safety studies and workshops, including HAZID/ENVID, SIL Classifications, Smoke, Gas, Fire and Explosion Risk Analyses, QRA, ALARP assessments, Fire and Gas Mappings and Noise Studies.

RESPONSIBILITIES

• Organise, coordinate, control and carry out the work assigned related to project(s).
• Review incoming client document from technical consideration and make require summaries/ key points for agreeing on strategy for execution with Project Director and decide requirement of resources including external resources.
• Monitor planning and progress of work.
• Monitor the issue of technical documents by establishing and updating the Document List.
• Provide all information to the Project Director related to organisation, planning, progress and reporting on activities assigned.
• Coordinate the work being done by outside agencies
• Perform specified technical tasks with reference to identified requirements.
• Be familiar with applicable codes, standards, specifications and regulations.
• Make project execution plans and other project related documents including project schedules.
• Review and control the work performed by the discipline team.
• Establish transmittals for issue of documents including distribution list to outside parties and internally within the organisation.
• Review new requirements and inform on their consequences.
• Identify design changes, report them and update the documentation.
• Handle internal and external interfaces.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Bachelor's degree in Engineering major in Mechanical, specializing in project material engineering, petrochemical and plant design and construction.
• At least 15 years of working experiences in engineering company.
• At least 4 years working experiences in FPSO and Offshore project management, engineering and construction execution and management
• Working experiences as engineer or project control in design office and construction yard such as module fabrication shop or shipyard and integration of topside modules to hull.
• Strong engineering knowledge of Topside engineering including module, piping and equipment layout design, material design, and procurement in FPSO Project, working knowledge with NORSOK, DNV, ASME, ASTM, MSS, working knowledge or experience in support design, and insulation design.
• Willing to travel and/or station in module fabrication yard, structure pre-fabrication shop, detail engineering subcontractor’s office as project engineer.
• Familiar and aware of collaboration and interface coordination between Joint Venture, Consortium set-up and inter-discipline engineering and inter-contractor activities with proactive mind.

Have Quality Control experience,can read drawiings,can use measuring tools,can use three-dimensional coordinate measuring instruments,can complete work tasks independently,have a team spirit,can lead a quality inspection team,can be responsible for matters related to the quality inspection department, For quality inspection reports,etc,you will use computer office software and have at least 3-5 years of quality inspection work experience.

Title: Azure Cloud Engineer

For quick response, please share your resume to [email protected] or WA to +65 92333815.

This role will focus on designing, building, and maintaining scalable cloud-based data solutions, leveraging Azure services to drive business insights and optimize data workflows.

Key Responsibilities

• Design, deploy, and manage cloud-based data solutions on the Azure platform.
• Build and optimize data pipelines, data lakes, and ETL processes using Azure Data Factory, Databricks, and Synapse Analytics.
• Collaborate with cross-functional teams to ensure seamless integration of data across multiple sources.
• Develop secure and scalable cloud solutions, adhering to best practices and compliance standards.
• Implement data governance, monitoring, and quality assurance practices within Azure environments.
• Troubleshoot and resolve issues in cloud and data pipelines to ensure high availability and performance.

Required Skills and Qualifications

• Bachelor’s or Master’s degree in Computer Science, Information Technology, or a related field.
• Strong experience with Azure services, including Azure Data Factory, Databricks, Synapse Analytics, Azure Storage, and Azure Functions.
• Expertise in data engineering, including ETL/ELT processes, data modeling, and managing structured/unstructured data.
• Proficiency in programming languages such as Python, Scala, or SQL.
• Hands-on experience with big data tools such as Apache Spark, Kafka, or Hadoop.

Thanks, and Best Regards

Karanam Vijaya Kiran

(EA Registration no: R1443178)

HP: +65 92333815

Recruitment Manager

Helius Technologies Pte Ltd (EA Licence No: 11C3373)

Responsibilities:

• Serve as the first point of contact for seeking technical assistance, over the phone, remote connection software, chat, and email
• Perform remote troubleshooting through diagnostic techniques and pertinent questions
• Determine the best solution based on the issue and details
• Walk through the problem-solving process
• Direct unresolved issues to the next level of support personnel
• Provide accurate information on IT products or services
• Record events and problems and their resolution in internal ticketing systems.

Requirement:

• Minimum Bachelor's degree is required.
• Technical support professional with 3 years’ experience in the IT technical support / Desktop Support focused on end-user support
• Good experience in support and troubleshooting Windows and Mac OS including mobile devices (iOS and Android mobile operating systems)
• Ability to diagnose and resolve basic to moderately complex end-user technical issues
• Experience with setup and configuration of end-user desktop and laptop computer hardware, software, phones and peripherals.Technical Support / Desktop Support Engineer.

Interested candidates, who wish to apply for the above position, please send in your resume to [email protected]

We regret that only shortlisted candidates will be contacted.

EA License No. 01C4394

EA Personnel Reg.No. R1104824 (Samsudeen Mohamed Basith)

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an emailto let us know. Please feel free to contact us if you have any queries.

• Well Established Company
• Basic $4000 - $5200 + Variable Bonus + Allowances
• Excellent Welfare and Benefits + Career progression
• Working location: West / Northeast (Both location available)
• Working hours: 8:30am – 5:30pm (Mon – Fri)
• DCS | PLC | SCADA | Harmonas Programming
• Training Provided

Job Responsibilities:

• Plan, design, and configure control systems for a variety of applications, ensuring seamless integration with Building Automation Systems (BAS), Distributed Control Systems (DCS), SCADA, and Programmable Logic Controllers (PLC)
• Create detailed control schematics and field termination drawings, ensuring accurate design documentation for system installation
• Set up and configure system databases, prepare control descriptions for Testing and Commissioning (T&C), ensuring all configurations are optimized for performance.
• Lead Factory Acceptance Testing to verify system functionality, compliance with project requirements, and quality standards.
• Provide hands-on support during installation, commissioning, and start-up phases. Troubleshoot, repair, and calibrate systems on-site to ensure optimal performance.
• Conduct in-depth troubleshooting and fault diagnosis across systems such as DCS, PLC, BAS, and SCADA to resolve issues and maintain smooth operation.
• Perform system testing, calibration, and fine-tuning to ensure systems operate at peak performance and meet specified requirements.
• Work closely with project managers, designers, and engineers to ensure projects are executed smoothly and on time. Communicate technical requirements and solutions effectively to clients and stakeholders.

Qualifications & Experience:

• Bachelor’s Degree in Electrical Engineering, Control Systems, Automation, or a related field.
• Proven experience in system configuration, design, and commissioning of DCS, PLC, BAS, and SCADA systems.

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

Our platform support team helps our high-profile clients manage long and short-form video content production and distribution with cloud-based applications. We provide video streaming services with advanced network architecture for sites located across the US.

We're committed to delivering top-notch support around the clock, which is why we're expanding our team to include individuals based in Singapore to ensure 24/7 coverage for our platform.

WHAT YOU'LL DO

• Work with an experienced Support Engineering team to research, diagnose, troubleshoot, and identify solutions to resolve customer issues in a timely manner
• Take ownership of global customer issues reported via Netsuite ticketing system and see problems through to resolution by liaising with Edisen team members
• Follow standard procedures for proper escalation of unresolved issues to the appropriate internal teams
• Capable of documenting procedures pertaining to IT support and networking troubleshooting in Confluence & Sharepoint
• Follow the SLA for issues with respect to the severity
• Develop solutions that improve our teams' ability to support customers
• Take part in 24-hour on-call pager duty weekly roster with 4 other team members to resolve occasional critical issues
• Learn and understand our video technology platforms

WHAT YOU NEED

• Certification in networking, technology or another related field is preferred
• Working experience in support ticket management, engineering and troubleshooting is preferred but not required
• Proficient knowledge of basic networking (DNS, TCP/IP, OSI model) is preferred
• Experience in managing systems, network communication, advanced metadata exchange of mission critical 24/7 operations.
• Experience with Microsoft Office suite is preferred (Sharepoint, Teams, Excel, etc.)
• Strong analytical skills to identify and resolve complex technical issues efficiently.
• Ability to troubleshoot system malfunctions and network connectivity problems effectively.
• English language professional proficiency is required (written & verbal)
• Must be located in Singapore

WHO YOU ARE

• Tech savvy, comfortable communicating solutions with both technical customers and colleagues
• A team player; collaborate with global colleagues to find solutions and participate in internal assignments and projects
• Pro-active; you take initiative & find enjoyment in solving issues and improving processes
• You have a positive “can do” attitude coupled with an ability to self-manage
• You are methodical and organized with an ability to prioritize effectively to
  accommodate tight deadlines in a dynamic & fast paced environment
• You have an interest and ability in expanding your skillsets & knowledge

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.