JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical Installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical Installation, testing and commissioning

JOB REQUIREMENT

• Bachelor's degree in Electrical & Electronic engineering.
• Minimum 3 years work experience in process plants or in the water/wastewater industry, with good knowledge in electrical desgin of water and/or wastewater treatment plants.
• Familiarity with AutoCAD, Navisworks.

Job Description:

• Develop and maintain responsive web applications and user interfaces.
• Collaborate with backend developers to integrate APIs and services.
• Write clean, maintainable, and efficient code using modern frameworks and libraries.
• Participate in code reviews and provide constructive feedback.
• Troubleshoot and debug issues in production and development environments.
• Ensure applications are optimized for maximum speed and scalability.

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related field.
• 1-3 years of experience in frontend development.
• Proficiency in HTML, CSS, and JavaScript.
• Familiarity with frameworks such as React, Angular, or Vue.js.
• Knowledge of responsive design principles and cross-browser compatibility.
• Strong problem-solving skills and attention to detail.

Job Description

• Responsible for Equipment Uptime, Productivity

• Work in a cleanroom environment for long hours

• In-charge of PM planning, Equipment Maintenan

Management.

• Co-work with Engineer to resolve equipment/line

• To improve and enhance machine performance a

machine capability.

• Perform any other duties as assigned.

Job Requirements

• Diploma/Higher Nitec/Nitec in Engineering (Elect

Mechanical), or equivalent.

• Proficiency in Microsoft Office.

• Ability to work independently as well as in a team

• Shift work required.

• At least 2 years of relevant working experience inenvironment.

Job Info:

• Working Days: Monday - Friday
• Working Hours: 8:30am - 5:30pm
• Location: West
• Salary: Basic up to $3,600 + Allowance $100 + AWS + VB

Job Description:

• Oversee, manage, and coordinate project activities alongside a team of Engineers and Technicians to ensure successful project completion.
• Track and manage project progress to meet timelines, stay within budget, and maintain quality standards.
• Collaborate closely with consultants and clients to ensure project requirements are met.
• Conduct system programming and troubleshooting during the project implementation phase.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280
Loh Kar Leong | EA Personnel No.: R23116015

We require experienced Electrical engineer that is able to

-work on board a tourist cruise boat along Singapore River

-troubleshoot and rectify electrical problems

-work independently

-familiar with AC and DC conversion

-charging of boats using shore chargers

-general works (Painting and Cleaning)

-

Job Responsibilities:

a) Assist and support the Project Management team in project execution:

• Prepare shopdrawing and design calculation report such as cable sizing and etc

• Liaise with client on technical requirements

• Liaise with consultant or authority for the approval of design

• Provide technical support and advice on design and engineering to the project team

• Assist project team with technical advice to installation team

b) Assist and support the Business Development team in tender or proposal submissions:

• Conduct site survey and prepare feasibility study report

• Perform technical assessment such as Shading analysis PVSyst simulation, consumption analysis and etc

• Prepare tender documents for submission

• Prepare costing for commercial proposal

c) Familiar with Authority requirement and IEC standard or equivalent for renewable system installation

d) Maintain and update renewable system components list

e) Assist in the development and upgrade of engineering tools

f) Provide support for team members in other regions

g) Liaising with new and existing vendors/suppliers for price lists and up-to-date product and service information with the procurement team

h) Liaise with other teams to gather feedback on design and costing for continuous improvement

i) Ad hoc task assigned by the reporting officer

Job Requirements:

• Minimum Diploma/Degree in Engineering field (Electrical engineering background would be an advantage)
• At least 2 years of working experience in renewable industry
• Proficient in engineering drawing interpretation and adept at applying requirements to design effectively
• Familiar with Autocad, PVSyst and Sketchup
• Quick learner, goal-oriented team player with strong communication and troubleshooting skills

The applicant must be:

• A Marine Engineer whose working experience will include Failure Modes and Effects Analysis for DP Equipment Class 2 and 3 vessels as a team member and independently witnessing DP FMEA Proving Trials and Annual DP Trials in the capacity of third-party surveyor.
• Familiar with IMCA DP related guidelines and with the requirements of Oil Majors, including ASOG development and implementation.
• Familiar and experienced with inspections of vessels working in the oil, gas, and renewable energy sectors.
• Willing to take on new roles such as superintendency and project management of vessel maintenance, repairs, and dry dockings.
• Willing to travel overseas and offshore when required.
• Analytical, able to work independently, results orientated, resourceful and pro-active.
• Able to independently develop competency and practice continuous professional development.

Qualification

• Degree in Electrical Engineering, Marine Engineering or equivalent.
• IMCA Accredited DP Practitioner.
• IMCA eCMID Accredited Vessel Inspector.

Experience Required

The Projects Engineering will have at least two years’ experience working with vessel Dynamic Positioning Systems (DP) as a consultant or independent verifier.

As an equal opportunities’ employer, we offer a competitive remuneration and generous benefits package, commensurate with qualifications and experience.

If you are keen to take up this rewarding opportunity and challenge, please send in your CV [email protected].

www.m3marine.com.sg

The Site Engineer (Civil) is responsible for assisting the PM on the progress of site works and manpower related aspects of the project. He/She will be required to:

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Monitor and supervise Workheads/Foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical diculties.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.

Job Description

Assisting Project Engineer with daily site activities.

Formulation of procedures for construction activities.

Attendance and contribution for prestart, internal, HSE and client meetings.

Requirements

Atleast 2 - 3 years of working experience in construction field

Degree in Civil Engineering or its equivalent

We are seeking an experienced Middleware Engineer to join our team. The successful candidate will be responsible for administering, supporting, and maintaining middleware products, including but not limited to IBM WebSphere, Oracle WebLogic, JBOSS EAP, IBM HTTP servers, Oracle HTTP servers, and IBM WebSphere MQ (WMQ). This role requires a strong technical background, excellent problem-solving skills, and the ability to work both independently and collaboratively in a dynamic environment.

Key Responsibilities:

• Administer, support, and maintain middleware products (IBM WebSphere, Oracle WebLogic, JBOSS EAP, IBM HTTP servers, Oracle HTTP servers, IBM WMQ).
• Install, configure, and maintain JBOSS EAP, IBM WebSphere Application Server (WAS), Oracle WebLogic, and IBM WebSphere MQ (WMQ).
• Assess system needs, identify appropriate changes, and make recommendations for improvements.
• Perform middleware system administration tasks, including troubleshooting, monitoring, problem resolution, system security, and change implementation.
• Plan, prepare, and apply maintenance fixes and upgrades for JBOSS EAP, WMQ/WAS, and other middleware platforms.
• Assist with high-level debugging, including heap and thread dump analysis, to support application teams.
• Provide detailed documentation for middleware installations, configurations, and administrative processes.
• Work individually or as part of a team on system projects related to UNIX, Linux, Windows, and application support.
• Provide on-call support for middleware systems as required.

Experience Required:

• 6+ years of experience managing middleware platforms, including IBM WebSphere Message Queuing, Application Server, JBOSS EAP, and Oracle WebLogic.
• Strong UNIX/Linux operating system administration experience.
• Deployment and administration of JBOSS EAP in enterprise environments.
• Experience deploying clustered, highly available middleware platforms.
• Familiarity with database integration is a plus.
• Experience with scripting languages to automate tasks is an advantage.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

· Ability to resolve machining problems appearing on parts by analysing the regular test cuts usually provided with the Maintenance literature.

· Ability to resolve machine service , Maintenance tasks of the complex nature without Technical assistance.

· Ability to resolve application problems of a normal complexity by occasionally seeking the assistance from experienced Application Engineer.

· Ability to recommend solutions to customers.

· Provide training to customers when required.

· May supervise a less experienced service on a task related to the preventive maintenance, repair and/or installation of Machine.

· Ability to perform on site audit and provide support for customer sale.

· Customer orientated and self-driven.

· Strong and dynamic leader with active listening, understanding and problem solving skills.

· Analytical approach to complex problems, ability to prioritize, reliable, and independent

To assist Design for Safety Professional to carry out following duties:

• Recognise the importance of design for safety and health of a construction project to eliminate or mitigate such risks throughout the different life cycle of a building and structure
• Recognise, and advise stakeholders on, the duties and responsibilities of DfS Professionals in accordance with relevant legal requirements and WSH (DfS) Regulations
• Prepare for DfS review meetings in accordance with WSH (DfS) regulations
• Coordinate DfS review meetings for consideration of safety and health risks during different phases in the lifecycle of a building and structure
• Apply hazard identification tools and risk assessment for DfS review meetings in accordance with organisational procedures
• Establish types of safety and health records to be kept in the DfS Register in accordance with WSH(DfS) regulations
• Coordinate the flow of relevant information to stakeholders throughout the construction project
• Familiar with Design for Safety Guidelines of MOM
• Able to work with consultant team to carry out Design for Safety Review Meetings / Workshops in accordance to GUIDE 1, GUIDE 2 and GUIDE 3 according to MOM regulations
• Prepare and Maintain Design Risk Registers
• Prepare Design Risk Register documentation and handed over to relevant parties

-Provide engineering expertise and technical assistance for installation, maintencance, troubleshooting and repairs of automatic and electrical device, loct, etc.

-Conduct scheduled, preventive and ad-hoc maintencance at customers' premises

-Attend emergency site issue and respone to sited within time frame

-Manage, prepare and maintain proper reports and records for maintenance

-Assist in other business activities as and when assigned

Requirement

-Candidate must possess at least Diploma / Advanced / higher / Graduate Diploma, Bachelor's Degree / Post Graduate Diploma / Professional Degree in Engineering (Electrical / Electronic) or equivalent.

-At least 3 Years of working experience in the related construction field is required for this position

-Preferably Junior Executive Specialized in Engineering - Electrical or equivalent

Reporting to the Flow Manager, he/she will be responsible for driving and meeting product reliability and improving product yield.

Job description

- Prepare and submit concessions to OEMs for out-of-scope repairs.

- Liaise with OEMs on technical queries or any other matters as

required.

- Provide technical support and leadership to the shop floor, as well

as to various sections requiring engineering inputs.

- Support shop floor on modification of existing fixtures and

designing of new ones.

- Ensure that all matters pertaining to product or process are

managed efficiently.

- Ensure that all the technical problems are resolved in a timely

manner, hence enabling smooth operation and production

- Liaise with Marketing & Customer Service Department to ensure

that all technical requirements set out by the customers are met.

- Carry out feasibility studies for new capability setup as well as

initiate and carry out the set up.

- Set up new specification capability on existing special processes.

- Review special processes requirement for new product part

number / CMM.

- Set up new Equipment / Machine or modify existing set up for

increase in capacity.

- Conduct investigation and issue warranty reports

Perform process nonconformance gap analysis.

Create and maintain necessary shop documentation to ensure compliance with CMM & other specification revision:

- Overhaul Routers

- Lot Sheets

- ICR

- Bushing Installation Sheets

- OHRW Assembly/ Dis Assembly Worksheets

- OHRW Process Sheets

- Plating Data Sheets

- Plating Masking Data Sheets

- NDT technique sheets

- Procedures

- Forms

Candidate skills & requirements

- Knowledge of MS Words, Excel & PowerPoint

- Project Management

- Special process knowledge

- Robotics programming is a plus

- CAD experience is a plus

Job Description

• Monitor systems performance and usage, including response times.
• Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting.
• Communicate regularly with technical, applications and operational staff to ensure systems integrity and security.
• Provide technical advice to the team and clients on installation, setup, configuration of systems.
• Implement plans to make systems available to users in a shared, secure and controlled manner.
• Identify any complex system issues to provide advisory to the stakeholders.
• Install, configure, and maintain server operating systems (Windows/Linux/VMWare).
• Deploy, configure, manage, and troubleshoot the following software/hardware - Active Directory, Exchange Server & Exchange Online, VMware ESXi, SAN Storage & Backup.
• Develop automated processes to define, measure, and report on service quality, stability and capacity.

Requirements

• At least 3 years’ experience in developing, implementing and maintaining IT systems.
• Systematic in approach and familiar with enterprise level trouble shooting.
• Bachelor's Degree/Diploma in Computer Science, Engineering or equivalent.

EA Licence No: 11C5502 | EAP Registration No: R21100522

Job Description :

1. Need to take Bar Bending Schedule from rebar structural drawings.

2. Need to Take the exact rebar quantities from the provided drawings.

3. Submission of Cost control reports for total rebars received & total rebars used & wastages.

4. Able to test and use the communication devices.

Job Requirements :

1. Experience in Bar Bending Schedule.

2. Diploma or above relevant qualifications.

3. Previous Singapore work experience will be an added advantage

Good knowledge and hands on experience working with software and hardware systems in the area of:

• IP CCTV System

• Perimeter Protection System (PPS)

• Physical Security Information Management System (PSIM)

• Video Management System (VMS)

• Audiovisual System

 Analyze, plan, implementation (network, system, infra, applications), testing, and management of a state-of-the-art integrated perimeter, video surveillance and video analytics security system.

 Work closely with team members to meet client’s service delivery level agreement

 Able to work and coordinates with contractors and clients

 Works with partners to diagnose and rectify technical issues as well as support preventive and corrective maintenance

 Understands technical documentation, installation manuals, system drawings etc.

 Able to read and orientate construction drawing, floor plan, etc.

 Continuously looking to improve processes as well as introduce new technologies for better security and greater customer satisfaction

 Proficient in electrical power and good knowledge on power cabling works for on-site works

 Understands technical documentation, manuals, as-built system drawings etc.

 Works independently without supervision and communicates well with team members, partners, and clients

 Assists maintenance team to ensure System Availability and Reliability meets customers’ requirement

 Carries out any other technical related duties that may be required

 With knowledge on construction site safety and regulatory requirements

Personal Attributes

• Positive work attitude, self-motivated, creative, and resourceful with a customer first mind set

• Independent, hardworking, and able to work under pressure

• Able to handle emergency situations outside of normal work hours when required

• Good inter-personal, organizational, problem solving and teamwork skills.

Work Location Mostly outdoors on different sites across Singapore

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

Responsibilities:

• Plan and lead the execution of a comprehensive deployment plan, including work planning, scheduling, budgeting, metrics, training, pilots and resources.
• Collaborate with all project teams to ensure alignment between all deployment-related activities.
• Liaising with the customer technical representatives.
• Provide recommendations to client on deployment of new features.
• Create and Manage requests on ITSM tool.
• Implement the changes as applicable, test the changes and handover to customer.
• Troubleshoot issues with Network Deployment.
• Troubleshooting critical incidents and problem tickets.
• Identify potential failures and recommend solution.
• Capacity management, forecasting and recommendation.

Requirements:

• L3 Network Engineer with min 7yrs of experience
• Good To Have Skills: No Technology Specialization.
• Should have supported Network deployments.
• Should have 6 years of experience in Network operational support/management roles.
• Excellent knowledge and troubleshooting skills on SD WAN, LAN segmentation, Cisco Switches, Cisco Wireless Access Points, Cisco Wireless Controllers, Cisco Routers, Firewalls Fortinet, Checkpoint, Cisco, Riverbed Bandwidth Optimizers, F5 Load Balancers, NetScaler and BlueCoat.
• Maintain design of LAN/WAN including protocols and routing.
• Identify potential failures and recommend solution.
• Update knowledge base with known errors.
• Excellent Written and Verbal Communication.
• Flexible to work in 24x7 shifts.
• Good understanding of procedures, application and concepts within own subject area and understanding them in the context of the business.

Assist Project Manager in project planning and coordination on site.

Manage day to day site operations

Attend clients, consultants, sub-contractors and site meetings

Manage, monitor, delegate and motivate the construction project team.

Deploy required resources such as manpower, machinery & equipment in accordance to the project requirements.

Promote strong safety culture and ensure site safety and vironmental control measures are in place at all times.

Other role as assigned by Project Manager.

Responsibility

The holder of the position is mainly responsible for the following areas in coordination with his / her superior:

Design and build the DWH database models (star schema).

Manage the semantic model in Oracle Analytics Cloud to provide a unified view of our organization's data.

Manage application roles and access rights for end users including row level security filters, to protect sensitive data.

Work with ETL specialists, IT business Consulting as well as external vendors to ensure data ingestion and integration into the database model

Collaborate with Business Controlling and business counterparts on new reporting requirements.

Ensure data quality, security and compliance with industry standards and internal guidelines.

Ensure proper documentation of data infrastructure, data models, workflows as well as security concepts in accordance with internal security policies.

Skills

Looking for a Data Engineer more focused on Database modelling, Currently in Oracle environment and going forward with GCP stack.

Proficiency in SQL and data warehousing

Strong understanding of data modelling techniques and hands on experience building database models (star schema).

Expertise with ETL (extract, transform, load) processes. Familiarity with BI tool integration such as Tableau or Looker

Strong analytical thinking, problem-solving capability, and ability to translate business needs into technical specifications.

Customer-oriented with good communication and interpersonal skills.

Ability to manage and communicate effectively with stakeholders

• Deliver integration standards to reduce operational risk and deliver operational excellence

• Define detailed technical requirements and scope of work for vendor or bank team for implementation

• Drive business and control partner initiatives such as Compliance Assurance and Communications Surveillance

• Support automation initiatives with goal of delivering service excellence and meeting compliance requirements

• Excellent organizational and communication skills

• Detail oriented

• Demonstrated ability to work as part of a team

• Ability to manage and communicate effectively with stakeholders

• Experience in Enterprise voice solutions/services and basis knowledge of server OS / configuration

• Effective communication skills with the ability to communicate technical information and manage difficult and complex stakeholder relationships at all levels

• Results driven with a strong desire to succeed and see all project and client deliverables through to completion

• Team Player with a “can do” attitude

• Experience working in the financial or banking industry, is a plus

• Takes ownership and accountability for actions / getting thing done and achieving quality of result

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Job Description:We are seeking a skilled and experienced BM FileNet Administrator with a minimum of 5+ years of hands-on experience in FileNet administration, preferably within the banking domain.

The ideal candidate will be responsible for the installation, configuration, and maintenance of the FileNet platform, ensuring high availability, security, and optimal performance.

Key Responsibilities:

• Administer and support the FileNet system, including Content Engine, Process Engine, and other related components.
• Perform system configuration, troubleshooting, patch management, and upgrades.
• Ensure system performance and security standards are met.
• Provide technical support and resolve FileNet-related issues in a timely manner.
• Collaborate with cross-functional teams for integration and optimization.

1. Assist project manager with day to day on-site monitoring, project implementation and scheduling.

2. To schedule, co-ordinate, implement and manage projects- in part or wholly- to ensure timely work progress, goods or services delivery on schedule, while taking into account the budgeted qualities and cost.

3.Ensuring that work is carried out according to approved plans, regulations and contract specifications.

4. Accountable for the safety and quality of the project.

5.Conduct project progress meetings, as well as reviewing schedules.

6.Manage the project team’s training.

7.Liaising with consultants and sub-contractors.

8.Prepare method statement, proposal, test plan, acceptance plan and timeline schedule in collaboration with the Project Manager as the case may require.

9. Accountable for preparing weekly/ monthly progress reports.

10.Ability to read AUTOCAD / Schematic preferable.

11.Perform ad hoc duties as assign by superiors.

5.25 days work week, alternate Saturday.

8.30am to 6pm.

Requirements:

• Bachelor Degree in Civil Engineering or Degree in Project Management.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.
• Proficient in written and spoken English.
• Possess class 3 driving license.

Job Description

As a Firmware Engineer, you will focus on adapting, optimizing, and validating firmware for Project WATT’s systems. This role requires working closely with suppliers and internal teams to ensure that hardware and software integration meets performance, reliability, and operational requirements. Your primary responsibility will be to fine-tune existing firmware, troubleshoot hardware-software interaction issues, and ensure seamless deployment in real-world scenarios. This position also involves providing technical support during system integration and addressing firmware-related challenges in collaboration with hardware suppliers.

Responsibilities

• Design, optimize, and maintain firmware solutions to support hardware functionality, system performance, and scalability.
• Manage, review, and oversee firmware customization projects with external suppliers, ensuring all deliverables meet technical specifications, project timelines, and quality standards, including collaborating with hardware suppliers to adapt and optimize existing firmware for Project WATT’s hardware components, ensuring seamless integration with internal systems.
• Validate and integrate supplier-provided firmware with hardware systems, proactively identifying and resolving compatibility or performance issues.
• Audit and evaluate supplier deliverables, providing feedback and corrective actions to ensure continuous improvement in firmware quality and functionality.
• Supervise supplier development processes, ensuring adherence to industry best practices and project requirements.
• Debug and troubleshoot hardware-software interaction challenges, ensuring stable and reliable system operation across deployment scenarios.
• Conduct performance and compliance testing to validate firmware functionality and ensure adherence to regulatory and safety standards.
• Document firmware configurations, testing results, and improvement processes to ensure transparency and support team collaboration.
• Monitor firmware performance post-deployment, identifying issues and coordinating with suppliers to implement necessary updates or fixes.
• Provide technical guidance and support to internal teams during hardware-software integration and field deployments, ensuring successful implementation.
• Stay updated on emerging technologies and best practices, leveraging them to propose and implement improvements in firmware design, supplier processes, and integration workflows.

Requirements

• A Bachelor's or Master's Degree in Electrical Engineering, Computer Engineering, or a related field. At least 5 years of experience in firmware development or adaptation, working with embedded systems will be prioritized.
• Strong understanding of hardware-software integration and experience working with supplier-provided firmware.
• Proficiency in debugging tools such as oscilloscopes, logic analyzers, and protocol analyzers to identify and resolve firmware issues.
• Familiarity with communication protocols such as UART, SPI, I2C, CAN, or Ethernet.
• Proven ability to optimize and adapt existing firmware to meet specific operational requirements.
• Strong problem-solving skills and the ability to collaborate effectively with suppliers and cross-functional teams.
• Experience in EV-related firmware development, IoT systems, or robotics is preferred.
• Excellent documentation and communication skills to ensure transparency and effective collaboration.

Reporting to:

Technical Lead