The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the EICA project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability of specification capability for all I&C related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management in the I & C discipline for the WtE project
• Review the submittals from Contractors for Process Control like Waste Reception system, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Job Requirements:

• A relevant Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).
• At least 10 years of relevant experience in design and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will be considered as relevant.

Responsibilities:

Planning, coordination, and execution of substation automation projects.

Design, costing and integration of substation automation systems according to project requirements.

Installation, testing and troubleshooting of substation automation systems at site.

Preparation of project documents and drawings.

Requirements:

Diploma in Electrical Engineering/Computer Engineering

Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsibilities:

• Develop and document clear and well-targeted test cases to be used by yourself, other QA testers based on Business Requirements, current System functionality and Functional Specification/ Narratives.
• Defines complete level of test scenarios and variations in data to adequately perform end to end testing.
• Thoroughly test multiple functionalities and document the results by capturing end to end testing steps during execution.
• Submit defects and issues to development for correction, and retest once errors have been corrected following established procedures.
• Tracks defects and causal analysis to closure.
• Ensures that testing is completed on schedule.
• Closely collaborate with development team and business users throughout the entire project.
• Use analytical and critical thinking skills to recognize and reduce redundancies in testing efforts, minimize complexity, and create efficiency without compromising effectiveness.
• Support Test Manager to oversee respective finance testing activities.

Requirements:

• Bachelor’s degree or Diploma in Computer Science, Information Technology or in any related majors
• At least 2-3 years of experience in the field of software Quality Assurance, preferably in Banking domain.
• Proficient with Microsoft Office applications.
• Familiar with Software Testing Development and Testing methodology, especially Agile.
• Experience in using JIRA tool, API or SQL will be good to have.
• Must have experience in Test Automation
• Advanced knowledge of test methodologies and approaches

Interested Applicants, please email your resume to [email protected] (R1441955), stating the position as the subject title in the email. All Applications will be handled with strict confidentiality.

SERVICE TECHNICIAN

Company Background:

An established MNC company that offers mechanical locks, electromechanical and electronic locks, locking systems and hardware, digital door locks, hotel security solutions, secure identity systems, and fittings.

Location: Central (Ubi)

Remuneration Package:

• Basic up to S$ 2500
• Payable OT Allowances
• Performance Bonus
• Mobile Reimbursements

Responsibilities:

• Perform scheduling and retrofit of automatic door components (mechanical, electrical, electronic).
• Troubleshoot and inspect automatic entrances, offering part recommendations for user consideration.
• Provide site reports to clients for work completion, testing, commissioning, and decommissioning.
• Conduct risk assessments on all automatic entrance systems and products.
• Suggest upgrades for automatic doors and propose feasible solutions for existing door systems.
• Maintain assigned service vehicle in good working condition, ensuring cleanliness and hygiene.
• Stay updated on product information and technical knowledge of both company and competitor products.
• Ensure tools and equipment are in good condition, replacing damaged items as needed.
• Perform any other tasks assigned by management or immediate supervisors.

Job Requirements:

• Minimum at least a NITEC in Engineering field
• Preferably possess at least 2 years of working experience within the door automation industry
• Knowledge in hands-on technical or mechanical experience
• Class 3 driving license will be advantageous as site travelling required

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Responsibilities:

• Develop detailed project plans, including scope, timelines, resource allocation, and budgets.
• Define project objectives, deliverables, and success criteria.
• Coordinate and manage project activities to ensure timely and successful completion.
• Act as the primary point of contact for all project-related communications.
• Provide regular updates on project progress, risks, and issues to stakeholders and senior management.
• Facilitate meetings and presentations to review project status and address any concerns.
• Lead and mentor project teams, including automation engineers, analysts, and other relevant personnel.
• Assign tasks, set expectations, and monitor team performance.
• Foster a collaborative and productive work environment.
• Oversee the design, development, and implementation of automation solutions.
• Ensure that automation technologies align with organizational goals and standards.
• Collaborate with technical teams to troubleshoot and resolve technical issues.
• Identify potential project risks and develop mitigation strategies.
• Monitor project risks and implement contingency plans as needed.
• Ensure compliance with all relevant regulations and standards.
• Implement quality assurance processes to ensure that automation solutions meet established standards and requirements.
• Conduct post-implementation reviews to assess project success and identify areas for improvement.
• Maintain comprehensive project documentation, including project plans, status reports, and technical specifications.
• Prepare and present reports on project performance, outcomes, and lessons learned.

Requirements

• Degree in Engineering, Computer Science, Business Administration, or a related field.
• Proven experience in project management, with a focus on automation or technology projects.
• Strong understanding of automation technologies, methodologies, and best practices.
• Proficiency in project management software and tools.
• Excellent organizational, leadership, and communication skills.
• Ability to manage multiple projects simultaneously and work under pressure.

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Are you passionate about automation and streamlining complex IT environments? Join the team as an Ansible Automation Engineer and play a critical role in automating, configuring, and optimizing infrastructure operations.

We’re seeking a dynamic individual with expertise in Ansible who can design and implement automation workflows, helping our organization achieve greater efficiency and scalability.

Key Responsibilities

• Design, develop, and implement automation workflows using Ansible and associated tools.
• Write and maintain Ansible Playbooks, roles, and modules to manage system configurations and deployments.
• Collaborate with DevOps, Cloud, and Infrastructure teams to identify automation opportunities.
• Monitor, troubleshoot, and optimize existing automation processes to ensure reliability and performance.
• Maintain version control and documentation for all automation solutions.
• Provide mentorship and training to team members on Ansible best practices.
• Ensure compliance with security standards while designing automation solutions.

Qualifications

• Singaporean Citizen or Permanent Resident due to business needs
• Proven experience in designing and implementing Ansible-based automation solutions.
• Strong knowledge of YAML scripting and the Ansible ecosystem.
• Hands-on experience with infrastructure technologies, including Linux, Windows, and network devices.
• Familiarity with CI/CD pipelines and version control tools such as Git.
• Proficiency in scripting languages (Python, Bash, or Shell).
• Experience working in cloud environments such as AWS, Azure, or Google Cloud.
• Strong troubleshooting skills and a proactive mindset for problem-solving.

Nice-to-Have:

• Knowledge of containerization tools like Docker and orchestration platforms like Kubernetes.
• Experience with Infrastructure as Code (IaC) tools like Terraform or CloudFormation.
• Certifications such as Red Hat Certified Specialist in Ansible Automation or similar.

Our Client is in the Manufacturing Industry. Due to their current expansion plan, they are looking for an Automation Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Manage and maintain site automation systems, including ABB 800xA, Control Builder, Schneider Quantum, ProWORX 32, and industrial network infrastructure.
• Administer VMware setups, server/workstation configurations, FIX32 database/graphics, MES/DCS/SCADA/PLC systems, label applicators, and ABB robotic palletizer systems.
• Implement automation and control solutions for plant modifications, capital projects, and improvement initiatives in alignment with specifications, budgets, and procedural guidelines.
• Provide expert advice and support for troubleshooting, optimizing processes, and improving systems.
• Ensure compliance with safety and operational standards, maintain inspection readiness, and participate in audit activities as required.
• Lead, mentor, and develop junior staff to enhance their skills and contribute to achieving departmental goals.
• Assist in preparing the section’s annual operating budget to meet operational and strategic objectives.
• Plan and execute maintenance schedules, manage resources during maintenance activities, and address breakdowns effectively, including engaging external expertise when needed.
• Support facility master planning to ensure compliance with engineering standards, address obsolescence, and manage asset replacements.
• Monitor and maintain automation systems to ensure seamless plant operations and minimize production disruptions.
• Address customer complaints and deviations by ensuring timely implementation of corrective engineering actions.
• Any ad-hoc duty as given

Requirements

• Min degree in the relevant engineering discipline
• Min 3 years of relevant experience in the process/food industry
• PLC experience in ABB 800xA, Scheider or Siemens
• Good understanding of local codes and requirements
• Experience in Control systems both in maintenance and plant commissioning

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Job Description & Requirements

(A) Primary Function

1) Responsible for the Maintenance and Repair work of Production Automation machines.

2) Meet Target set by Superior.

3) Identify and initiate actions to prevent occurrence and recurrence of machine breakdown

4) Work as a team with all departments to achieve Optimum Productivity.

5) Ensure all products meet the standard cycle time and minimise machine down time.

6) Must work in shifts

(B) Duties and Responsibilities

1) To carry out repair & maintenance tasks assigned by Superior.

2) To record all repair & maintenance tasks on appropriate records.

3) To provide support to ensure production machines & equipments is repaired timely.

4) To attend to unforeseen machine breakdown during odd hour.

5) To carry out Preventive Maintenance (PM) as scheduled.

6) To support all Automation Integration.

7) To recommend improvement to enhance Productivity & Yield.

8) Compliance to all regulatory and in house system requirements especially for medical and automotive customers

9) Must prepare the automation documents, reports and records on daily basics

(C) Qualifications / Requirements

1) NTC in Engineering-related discipline, preferable in Mechanical/Electrical/Electronics/Plastic technology.

2) Hand-on experience in Factory Automation.

3) Experience in Plastic Injection Molding & PLC programming is plus point.

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, co-ordination and execution of LTA and SMRT projects

To attend all interface and co-ordination meetings with different stakeholders and contractors

Installation, monitoring, supervision, testing and troubleshooting of RTU at site

Preparation of project documents and drawings

Requirements:

Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, co-ordination and execution of LTA and SMRT projects

To attend all interface and co-ordination meetings with different stakeholders and contractors

Installation, monitoring, supervision, testing and troubleshooting of RTU at site

Preparation of project documents and drawings

Requirements:

Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

• Good Bonus - AWS + up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Planning, co-ordination and execution of LTA and SMRT projects

To attend all interface and co-ordination meetings with different stakeholders and contractors

Installation, monitoring, supervision, testing and troubleshooting of RTU at site

Preparation of project documents and drawings

Requirements:

Relevant Diploma in Electrical Engineering/Computer Engineering from a recognised Polytechnic

Strong interpersonal skill with a positive attitude

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsibilities:

• Responsible for machine setup, module alignment, vision alignment/calibration, and machine checkout.
• Ensure machine meet customer specifications.
• Provide trainings and testing on the machines.
• Provide occasional on-site support, both locally and internationally.

Requirements:

• NITEC, Higher NITEC, or Diploma in Engineering.
• At least 2-3 years of automation machine experience in semiconductor industries.
• Proficiency in machinery automation, including electrical, servo, sensor, and pneumatic systems.
• Ability to read mechanical and electrical drawings is advantageous.
• Experience in mechanical alignment, motor tuning, or vision systems is a plus.
• Positive attitude and willingness to take on additional responsibilities as needed.

GMP Technologies (S) Pte Ltd | EA Licence 11C3793 | EA Personnel: Novita Widjaja | Registration No: R22105960

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives.

By applying for this role, you consent to GMP Recruitment Services (S) Pte Ltd’s PDPA and e2i’s PDPA.

Responsibilities:

Planning, coordination, and execution of substation automation projects.

Design, costing and integration of substation automation systems according to project requirements.

Installation, testing and troubleshooting of substation automation systems at site.

Preparation of project documents and drawings.

Requirements:

Diploma in Electrical Engineering/Computer Engineering

Knowledge of data communication and Automation Systems for Electrical Network

Our benefits and compensation for permanent position are as follows:

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus ranging from 1 to 6 months depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Automation/Electromechanical Equipment)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up and troubleshoot semiconductor equipment.
• Document engineering enhancements for continuous improvement and future reference.
• Develop procedures for the assembly, inspection, and testing of equipment.
• Collaborate with the engineering and software teams to enhance system designs.
• Work alongside cross-functional engineering teams to troubleshoot and resolve system issues.

APPLY NOW!!!

• Min. Diploma in Mechanical or Mechatronics Engineering.
• At least 2 years of experience in setting up and managing automation equipment.
• Possesses a thorough understanding of electromechanical systems.
• Willingness to travel internationally for field support as needed.
• Availability to work overtime when required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69727 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Our client is a local-based company and a value-added solutions partner specializing in cutting-edge technologies in the AI and IoT sectors.

• Identify key stakeholders in the commercial real estate and office building sectors, such as property developers, building owners, and facility managers.
• Formulate and execute sales strategies to enhance market reach for smart workspace solutions.
• Keep abreast of industry trends, advancements in building automation technologies, and competitor activities to uncover new opportunities.

Requirements:

• Degree in Business/Marketing or equivalent.
• At least 4 years of B2B sales experience in Building Automation industry.
• In-depth knowledge of building automation systems and related technologies.
• Good communication and interpersonal skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Introduction to the role:

Overview:

A Marketing Automation Specialist is needed to support a centralized marketing automation team. This role focuses on setting up and executing email campaigns, managing lists, and providing support for campaign tracking and troubleshooting.

Key Responsibilities:

• Design and execute email marketing campaigns using Salesforce Marketing Cloud.
• Work with marketing teams to create targeted campaigns and build audience lists.
• Assist in tracking and reporting on campaign performance.
• Address technical issues, including basic HTML troubleshooting when required.

Requirements:

• At least 3 years of hands-on experience with Salesforce Marketing Cloud.
• Strong understanding of digital marketing principles.
• Ability to troubleshoot basic HTML issues.

We regret to inform that only shortlisted candidates will be notified.

EA Reg No: R22109791, Timothy Teo

Allegis Group Singapore Pte Ltd, Company Reg No. 200909448N, EA License No. 10C4544

Job Description:

• Assist Resident Engineer in daily close supervision and coordination duties
• Inspect and supervise Contractors’ works and tests to Approved Drawings and Specifications
• Participate in construction interface meeting for Instrumentation, Building Services (ELV) systems
• Checking BIM Model and interface with C&S team for the completeness of site clearance for Instrumentation construction activities
• Review of design deliverables for Instrumentation, Building Services (ELV) and release of IRF’s to contractor as per RE’s instructions
• Update of Daily Site Reports (DSR), maintain quality records of all works, monitor and report on work progress
• Responsible for the consistency of quality assurance inspections and testing for works
• Implement quality assurance plan in a well-coordinated manner
• Coordinate with Contractors on execution of works
• Participate in FAT activities and punch list follow up
• Participate in SAT, Commissioning of Instrumentation, Building services (ELV) activities till the final handover of the project

Job Requirements:

• Diploma in Instrumentation Engineering
• Registered as Resident Technical Officer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 5 years of relevant experience in quality assurance inspections on large infrastructure project or waste/water management projects in Singapore, particularly Instrumentation, Control, Automation and Building Services (ELV) systems

• The role which is part of the Supply Chain department will be responsible for maintaining and improving existing automation capabilities to ensure FFDC’s continued operation.
• The Automation Maintenance Technician is responsible for performing regular maintenance, troubleshooting, and repair of all automation systems and equipment.
• The role requires a solid understanding of automated systems, mechanical and electrical repair, and the ability to solve technical issues to ensure efficient operation.

Others

• Work location: 7 Sunview Road

Requirements

• Carry out routine maintenance and inspections of automation systems and equipment to ensure optimal operation.
• Identify, diagnose, and repair equipment and system malfunctions.
• Assist in the installation and testing of new automation equipment.
• Maintain records of regular maintenance and repair work.
• Collaborate with engineering and production teams to identify issues and implement solutions.
• Adhere to safety and quality regulations at all times.
• Train other team members on automation system operation as required.
• Assist in developing maintenance procedures and ensure implementation.
• Keep up-to-date with advancements in automation systems and new technologies.

Job Description:

We are looking for a motivated Automation Engineer Trainee to join our team and work on Industrial Automation & Controls system projects. As a trainee engineer, you will gain hands-on experience in various disciplines including Electrical, Instrumentation, and IT-related engineering.

Key Responsibilities:

• Assist in the development, installation, and commissioning of automation systems.
• Collaborate with multidisciplinary teams on engineering projects.
• Support the implementation of control systems in process plants.
• Participate in troubleshooting and maintenance activities.
• Document project progress and engineering procedures.

Qualifications:

• Fresh Diploma or Engineering graduates in relevant fields (Electrical, Instrumentation, Control Systems, or IT).
• Strong engineering knowledge and a recognized qualification.
• Good communication and teamwork skills.
• Willingness to learn and adapt to new technologies.

What We Offer:

• Comprehensive training and mentorship.
• Exposure to real-world industrial projects.
• Opportunities for career growth within the organization.

Job Title: Senior Automation Engineer

Location: Tuas, Singapore

Industry: Pharmaceutical Manufacturing

Employment Type: Permanent

About the Company: Our client is a leading global pharmaceutical company committed to advancing science and delivering life-saving medicines. With a strong presence in Singapore, they are looking to expand their automation engineering team. Join an innovative and fast-paced environment focused on quality, compliance, and cutting-edge technology.

Key Responsibilities:

• Lead the design, development, and implementation of automation systems, ensuring all systems meet operational requirements and regulatory compliance.

• Conduct and oversee the qualification of automated systems, ensuring adherence to Good Manufacturing Practices (GMP), quality standards, and safety protocols.

• Collaborate with cross-functional teams to manage and deliver automation projects on time and within budget. Provide technical leadership during project execution, from design through to commissioning.

• Diagnose and resolve issues related to automation systems, ensuring minimal downtime and maintaining system reliability.

• Ensure all automation documentation, including design specifications, user manuals, and qualification protocols, are thoroughly created, maintained, and compliant with industry standards.

• Identify opportunities for system optimization, process improvements, and automation upgrades. Support innovation in automation technologies to enhance operational efficiency.

• Work closely with process engineers, IT teams, and other departments to ensure smooth integration of automation systems with other plant systems.

Requirements:

• 6-10 years of experience in automation engineering, specifically in the pharmaceutical or life sciences industry.

• Working experience with MES, AMPS & Rockwell Pharma Suite including system design, coding, and troubleshooting.

• In-depth knowledge of automation system design and qualification processes (FAT, SAT, IQ, OQ, PQ).

Responsibilities:

• Design, develop, and maintain software applications using C#.
• Develop and implement automated test equipment and process systems.
• Write clean, scalable, and efficient code.
• Troubleshoot, debug, and upgrade existing software.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Participate in code reviews to maintain code quality and share knowledge.
• Ensure software meets all requirements of quality, security, modifiability, extensibility, etc.
• Document development processes, code changes, and other relevant information.
• Support internal and external BUYOFF, ensuring completion of Factory and Site Acceptance with customers and the project team.
• Quickly resolve issues by working with the project and production teams.

Requirements:

• Bachelor’s degree in Engineering, Computer Science, or a related field.
• Proven experience as a software Development Engineer or similar role.
• Strong proficiency in C# programming.
• Experience with test equipment and automation process systems.
• Knowledge of electrical and electronics hardware.
• Familiarity with test instrumentation and motion systems.
• Basic understanding of vision systems.
• Excellent problem-solving skills and attention to detail.
• Strong communication and teamwork abilities.
• Knowledge of hardware interfacing and control systems.
• Experience with CI/CD pipelines and automated testing frameworks.

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description:

We are seeking an experienced Engineer to join our Industrial Automation & Digitalization team. The ideal candidate will be responsible for the design and development of industrial automation control systems, ensuring high-quality project execution and client satisfaction.

Key Responsibilities

• Development and programming of PLC, SCADA, and HMI systems (preferably with Siemens, Rockwell, Wonderware/AVEVA).
• Experience in design and development of control panel and Electrical architectures.
• Conduct Hardware and Software Factory Acceptance Tests (FAT).
• Perform testing, commissioning, and Site Acceptance Tests (SAT) at client locations.
• Provide technical support to the Sales team during project bidding.
• Offer onsite and remote technical support and services.
• Ensure overall quality control of all project deliverables.
• Collaborate effectively with team members and clients.
• Travel within Singapore internationally including offshore Oil & Gas facility as needed for project implementation and meetings.

Requirements:

• 3-6 years of hands-on experience in industrial automation & digitalization.
• Proficient in various communication protocols used in the automation industry.
• Strong knowledge of automation technologies specific to Pharma, Oil & Gas industries is an advantage.
• Strong verbal and written communication skills.
• Team player with a flexible approach to work and problem-solving and engage with other project team members in Singapore and overseas.
• Diploma or Degree in Electrical, Electronic, Computer, Mechatronic Engineering, or equivalent.
• A willingness to learn and a growth mindset.

If you are passionate about industrial automation and meet the qualifications, we encourage you to apply and become a part of our dynamic team!

Job Scope:

• Provide troubleshooting and technical assistance for automation systems and software
• Monitor and maintain automation systems to ensure optimal performance and reliability
• Create and update technical documentation, including user manuals and support guides
• Collaborate with engineering teams to implement system improvements and upgrades
• Conduct training sessions for users on automation tools and systems
• Manage and resolve incidents related to automation processes
• Analyze system performance data to identify areas for improvement
• Ensure compliance with industry standards and regulations
• Assist in testing new automation solutions and technologies before deployment

Requirements:

• Diploma in Electrical Engineering/Computer Engineering from a recognized local polytechnics
• Relevant site co-ordination experience in LTA/SMRT projects with WSH Safety Co-Ordinator Level B certification.
• Strong interpersonal skill with a positive attitude.
• A leader who can work under minimum supervision, be independent and pro-active.
• A team player who is confident to lead, supervise and assist the various Project Manager in all sites related activities.
• A multitasker who thrives in a fast-paced environment with tight project schedule.
• Confident in communicating with LTA/SMRT and various SWC.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.