*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Execute the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE requirements

Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase / Commercial proposal development

▪ Bill of material

▪ Plot plan layout proposal

▪ Support lead to define man hour and cost estimate D - Project Execution

▪ Ensure the Piping and Layout engineering support to different projects

▪ Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations

▪ Analyse technical documents (e.g. specifications, calculation notes, drawings) to assess the scope of the studies required and the potential risks

▪ Seek solutions which can bring overall savings to the project

▪ Estimate quantities or validate estimation done by other specialist of the team

▪ Check all produced documents (internal or subcontracted) like design reports, technical specifications, drawings under responsibility

▪ Write the Piping and Layout methodologies / Design Premises comprehensive of all necessary data, general and specific design guidelines

▪ Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations

▪ Analyse project technical documents to validate consistency between the budget, resources and means allocated for the work completion and the targets to be met

▪ Organize the work of the team under responsibility

▪ Define and follow-up the planning of resources mobilization

▪ Monitor and report actual progress including 3D / check for Discipline activities, includ ing control of men-hours and delivered documents

▪ Control the input data for team activities and check/review all documents issued by the team

▪ Attend to internal review activities and inter-discipline check meetings

▪ Provide technical support to Project group

▪ Provide technical support to Procurement, Subcontracting and Construction activities included in the scope of work

▪ Supervise the writing of specifications and requisitions as well as technical bid evaluations

▪ Inform on a permanent basis the Project Piping and Layout leader of any foreseen technical or financial or delay risk

▪ Feed the Piping and Layout Department improvement system by reverting the lessons learned during the project E - Construction and start up

▪ Participate to test circuit verification

▪ Field engineering during construction activities

▪ Assist, when necessary, engineering adjustment on site

▪ Material management at site

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Perform tasks within the assigned area of responsibility while ensuring compliance with QA/QC and HSE requirements.Tasks Include:

- Continuously verify that input information used for assigned work aligns with project developments and report any anomalies to the Project Piping and Layout Designers or Project Specialist Lead.
- Conduct 3D modeling using PDMS, PDS, or SmartPlant 3D software.
Create construction or design drawings for piping networks using 2D software or by extracting details from 3D models (e.g., overall plot plans, equipment layouts, piping general arrangements, piping isometrics, and piping supports).
- Generate bills of materials (BOMs) or material take-offs (MTOs) for requisitions.
- Maintain document quality through thorough and consistent self-checks.
- Approve and sign off on produced documents.
- Communicate any modifications resulting from issued documents to relevant stakeholders.
- Verify documents produced by other draftsmen on the team, as needed.
- Update documents following feedback or comments from inter-discipline checks or external project stakeholders (e.g., Client, Yards, or Third-party reviews).
- Apply relevant provisions of the Piping and Layout Department

- Quality Control Procedure during all assigned tasks.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements.

Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase / Commercial proposal development

▪ Estimate quantity and cost for critical support

D - Project Execution

▪ Be responsible for the quality, respect of budget and respect of project schedule for piping flexibility analysi s tasks

▪ Review the Client technical documentation and requirements

▪ Be responsible for the design of all piping supports components

▪ Issue project piping flexibility (Stress analysis) specification and critical lines list

▪ Perform calculations of critical piping networks

▪ Issue loads to allow the design of pipe-rack and foundations

▪ Issue technical part of requisitions for all piping supports components required by flexibility analysis

▪ Issue technical bid evaluation for all piping supports components offers

▪ Issue technical part of requisitions for all piping supports components purchase orders

▪ Review and approve vendors documents

▪ Maintain project technical files and update Company standards

▪ Perform the inter-disciplines checking for the part of documents in accordance with the scope of piping flexibility section

▪ Check sub-contracted discipline engineering documents in accordance with the scope of piping flexibility section

▪ Check documents issued by piping flexibility engineers

▪ Check the isometrics for construction of critical lines

▪ Assist P and ID section preparation for flexibility inputs of line list

▪ Inform on a permanent basis the Project Piping and Layout leader of any foreseen tech nical or cost impact or delay risk

▪ Capitalize piping flexibility activities performed during the project E - Construction and start up

▪ Provide technical support

▪ Assist, when necessary, engineering adjustmenton site

F - Home ofice activities (Master)

▪ Projects coordination: provide input to Flexibility Engineer to harmonize design and methodologies

▪ Provide support to projects and procurements to solve non standards problems

▪ Define the modification of department work flow and dep technical standards

▪ Participate to the modification of company work flow and technical standardisation

▪ Collect project feed backs for continuous improvement implementation (Lesson Learned)

▪ Participate to vendor and outsourcing qualification

▪ Participate to project/company procurement strategy (Purchasing team)

▪ Develop and scout tools for simplified design activities

▪ Plan, control and manage outsourcing engineering center

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Key Responsibilities:

A. Development of Technology Expertise and Commercial Support

B. Feasibility

• Provide technical support to other project roles for specialist matters.

C. Bidding Phase / Commercial Proposals

• Analyze and interpret tender documentation.
• Define discipline-specific activities and deliverables, coordinating them in line with the project schedule.
• Identify and submit technical queries, deviations, and alternatives.
• Implement bidding methodologies, design criteria, and guidelines.
• Develop and issue requests for quotations for items not estimated in-house.
• Coordinate material quantity and weight estimation.
• Prepare engineering man-hour and material cost estimates.
• Assist the Proposal Manager during technical clarification meetings with the client.

D. Project Execution

• Ensure assigned goals are met while adhering to project quality and contractual standards. Take corrective action as needed within the team and escalate significant issues to the TM.
• Define activities and deliverables, establish timelines, and coordinate efforts per contractual obligations.
• Monitor and manage project progress and man-hour consumption.
• Prepare technical annexes for subcontracted engineering activities.
• Oversee subcontractor coordination and report discipline budget costs to the PM.
• Ensure discipline workflows, interfaces, quality checks, and the approval of all discipline project documents, including vendor submissions.
• Track and report scope of work changes to TM, updating man-hour and cost estimates as needed.
• Provide technical support to procurement and construction teams.
• Assist PM with client technical interactions, as directed by TM.
• Define and issue purchase requisitions.
• Perform technical bid evaluations and follow up with vendors.
• Support the creation of discipline construction inspection plans and manage vendor inspection test plans.

E. Construction and Start-Up

• Assist the construction team in implementing engineering solutions on-site.

F. Home Office Activities (Master)

• Verify man-hour and cost estimates.
• Review and validate key project documents in accordance with internal procedures.
• Assist project teams in resolving non-standard technical challenges.
• Update discipline workflows and technical standards.
• Contribute to the definition of execution plans.
• Track and analyze discipline project KPIs.
• Participate in vendor technical qualifications and procurement strategy development.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading global engineering and project management consultancy embarking on large-scale infrastructure and environmental projects.

*Please note that this role will be hired on a long-term contract to support our client's project.

*Work Location: West

*Salary Range: $4,500 - $6,000

About the role:

Pre-contract and post contract administration including the following: -

· Cost estimating and cost planning.

· Preparation of tender documents (including measurements and Bills of Quantities).

· Tender management including evaluation of tender submission.

· Assist Contracts Manager, Project Manager in Contract management and cost monitoring, management of interim/progress payment, including variation assessment and finalisation of account.

· Possess comprehensive knowledge of construction, logistics, material management and the ability to provide cost and financial advice.

· Relevant duties as and when assigned by reporting manager.

About you:

· Preferably Diploma in Quantity Surveying/ Construction Management/ Building Services or higher qualification recognized by Singapore Institute of Surveyors and Valuers (SISV).

· Minimum 5 years of relevant working experience in supporting Project Managers/Contract Managers in the delivery of projects in engineering and construction industry.

· Meticulous, independent, highly motivated, results-oriented and good team player.

· Able to manage stakeholders (Contractors, Client and Consultants).

· Good written and oral communication skills.

· Able to meet tight deadlines.

· Experienced in Public Sector Standard Conditions of Contract (PSSCOC) preferred.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

A. Development of Technology Knowledge & Commercial Support
Provide technical assistance in their area of expertise.
B. Feasibility
Offer technical support for project feasibility studies.
C. Bidding Phase/Commercial Proposal Development
- Review technical documents related to tenders.
- Define activity and deliverable lists, and coordinate tasks according to the project schedule.
- Identify and address technical queries, deviations, and alternatives for submission.
- Apply bidding methodologies, design criteria, and guidelines.
- Assist the proposal team with RFQs for commercial purposes.
- Estimate material quantities and weights (MTOs).
- Prepare manhour, item, bulk, and material cost estimates.
- Engage with clients and attend clarification meetings.
D. Project Execution (Job Progress and Completion)
- Achieve assigned goals and meet project quality and contractual requirements.
- Collaborate with the Discipline Leader to define activity and deliverable lists, set schedules, and coordinate activities per contractual requirements.
- Develop design specifications for civil works, including concrete works, plant roads, underground networks, and piling.
- Prepare detailed BOQs for civil works and buildings and MTOs for steel structures.
- Create technical documentation for subcontracted engineering activities.
- Design systems for drainage, sewage, plumbing, and building interiors.
-Conduct studies for foundations and concrete structures.
- Perform quality checks on all discipline-related project documents, including vendor submissions.
- Track and report scope changes to the Discipline Leader, updating manhour and cost estimates.
- Provide technical support to procurement, construction, and other project functions.
- Assist the Discipline Leader/TM in interfacing with clients on technical matters.
- Develop technical documentation for civil material requisitions and support procurement with technical evaluations.
- Collaborate with the Discipline Leader on Technical Bid Evaluations.
Review and address Client's technical documentation and requirements.
- Maintain project technical files.
- Execute assigned engineering activities, including detailed design, verification, and studies.
- Supervise and approve engineering designs and construction drawings for civil items like foundations, structures, and buildings.
- Monitor and report trends in civil quantities compared to bid-phase estimates.
- Design functional layouts, architectural aspects (3D modeling), and interior finishes, including furniture.

E. Construction & Start-Up
Provide field engineering support on-site.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Bidding Phase:

• Assist Project Management in selecting CAD software, evaluating client requirements, and exploring alternative solutions.
• Support Project Management in assessing cost and schedule impacts associated with 3D model tool selection.

Project Execution:

• Ensure the review and application of contractual requirements within the area of responsibility.
• Prepare project specifications for 3D software setup and user guidelines.
• Set up 3D modeling and review tools, providing support to 3D model specialists.
• Collaborate with the ICT team to manage activities related to 3D modeling software systems.
• Develop and maintain component libraries by gathering required component dimensions and data.
• Identify critical issues in 3D model development within the scope of responsibility and propose recovery measures.
• Establish tools for issuing 2D drawings and extracting data, including piping isometric drawings and MTOs.
• Configure the 3D model for data import and export processes.
• Ensure standardization of 2D drawing formats and 3D model elements.
• Contribute to constructability analyses through dedicated review sessions.

Construction Phase:

• Assist the construction team in setting up spooling tools.
• Provide support for as-built 3D modeling activities.

Staff Activities:

• Advocate for the optimization of engineering workflows and technical standards to enhance efficiency.
• Gather project feedback to drive continuous improvement of workflows (Lessons Learned).
• Research and evaluate new CAD tools in the market.
• Identify skill gaps and coordinate CAD software training for personnel.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is in the Utilities industry.

About the role: This role will be based in either Singapore or Taiwan and will require travel across several Asian countries, primarily Taiwan, Singapore, Japan, South Korea, Hong Kong, and China.

1) Market Management

• Owner of the development of the ME market for the zone and the zone ME Strategic KA’s regional leadership as relevant
• Liaise with Group GMD (Group Market Director), adapt to local/zone context the Group’s operating model
• Organize zone C-level meetings with ME Strategic Accounts
• Active survey and knowledge on the ME Market and Key Players’ needs and solutions developed (Competitors watch). Ensure the right timed go-to-market testing of the Innovation topics with well selected ME Key Accounts
• Define and develop solutions (across all portfolio of solutions & business models: water - including water technologies, energy, waste management) that could answer or/and anticipate the market/clients’ needs and trend with the support of the technical/marketing teams

2) Key Accounts Management

• Management of the Zone’s ME Strategic Key Accounts/Prospects (client stakeholders mapping, engagement & networking, anticipate the clients’ needs and trend, develop long-term innovative partnership…)
• Coordinate commercial response to solicited and unsolicited market opportunities
• Establish the stakeholders mapping of the Clients and their clear decision making process (technical, economic and business buyers)
• Establish a clear competition landscape
• Establish the first commercial contact, propose and test different solutions with the clients and eventually coordinate the transition to the project team while remaining part of the project team and the owner of the commercial actions.

About you:

• Bachelor’s Degree (min) or Master, preferably with technical or/and commercial background
• At least 10-15 years of experience working for a leading company in the Microelectronics industry, with preferably the experience in Asia and in Strategic Planning, Commercial Development, Marketing, Strategic Partnership, Operation…
• Able to travel in Asia for short periods on mission
• Leading commercial Knowledge of the ME Market Drivers and Key players, familiar with ME manufacturing processes and supply chain environment
• Own or/and able to build up and develop a strong commercial network at all levels, including C-Level relationship within the ME industry and clients in Asia
• Commercial experience for unsolicited proposal
• Familiarity with managing multi-stakeholders projects, including the corporates
• Experience of being a critical resource within a multidisciplinary project team
• Commercial mindset with high creativity based on market and client demands
• Quick Learner and curious to learn, especially with regard to the company's business (business models, water-energy-waste management solutions and values proposition…)
• Empathy, Open minded, team player
• Able to work in multi-disciplinary and multi-cultural environments
• Good communication skills, strong team spirit and high performance achiever
• Highly self-motivated to achieve a successful career in business development
• Ability to work with remote and matrix management’s requirements and constraints
• Ability to manage multiple projects across countries, Business Units and with different stakeholders both internal and external.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License No: 94C3545

EAP Name: Kimberly Wong Pik Kiun

EAP Reg. No: R1984508

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Carry out activities within the assigned area of responsibility, ensuring compliance with QA/QC and HSE standards.Tasks Include:

A - Development of Technology Knowledge and Commercial Support

B - Feasibility

C - Bidding Phase/Commercial Proposal DevelopmentD - Project Execution
- Design, execute, or review piping and layout studies, including:3D modeling.
- Review of 3D models with other disciplines and issuing clash check reports.
- Preparation of construction or design drawings (2D or extracted from 3D) for piping networks, including overall plot plans, equipment layouts, piping general arrangements, piping isometrics, and piping supports.
- Development of bills of materials or material take-offs (MTOs).
- Extraction of bills of materials and related information from 3D CAD models.
- Organize the team’s workflow and oversee resource mobilization planning.
- Coordinate the team’s work with piping and layout engineers involved in the project.
- Verify input data and review all documents and outputs generated by the team.
- Continuously monitor project assumptions underlying team activities and notify the Piping and Layout Lead of any anomalies.
- Supervise document updates following feedback from inter-discipline checks or external reviews (e.g., client, yards, third parties).
- Contribute to department improvements by sharing lessons learned during the project.
E - Construction and Start-Up

-Oversee material management on-site.
-Provide engineering support during the construction phase.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Draftsman executes the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A-Development Technology know how and Commercial support

B-Feasibility

C-Bidding phase/Commercial proposal development

D-Project Execution (Job progress and completion)

▪ Perform 2D drawings developed for electrical system design (single line diagrams, schemes and wiring diagrams)

▪ Perform 2D drawings developed for electrical system plant design (cable routings, grounding, lighting and tracing) and

substations arrangements

▪ Extract 2D drawings from the 3D model (cable routings and sections, grounding layouts, lighting layouts, etc.)

▪ Extract material quantities from the 3D model

▪ Implement electrical system installation details in 3D plant model (cable routings, supports, equipment)

▪ Participate to 3D modelling plant review

▪ Implement electrical load list and cables schedule in software tools

▪ Implement electrical materials take off (MTOs) in software tools

▪ Implement bill of quantities (BOQ) for electrical system installation in software tools

E-Construction and start up

▪ Review as built the technical documentation

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Designer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE

requirements. Tasks include:

A - Development Technology know-how and Commercial support

B - Feasibility

C - Bidding phase/Commercial proposal development

▪ Prepare Instrumentation bulk material quantities (BOQs and MTOs) for cost and erection works estimates

▪ Support Discipline Lead to define man hours and cost estimates

D - Project Execution

▪ Review Client technical documentation and requirements

▪ Follow-up subcontracted engineering activities and control subcontracted engineering documents

▪ Apply engineering design basis and guidelines

▪ Prepare the technical documentation for Instrumentation bulk material requisitions and prepare, according to internal

procedures, the technical evaluations

▪ Provide technical support to Project Team

▪ Optimise Instrumentation bulk material design ensuring minimal cost and complexity in compliance with the contractual and

safety requirements

▪ Prepare Instrumentation bulk material technical specifications

▪ Prepare Instrumentation installation drawings

▪ Prepare Instrumentation BOQs and MTOs

▪ Perform Instrumentation 3D modelling design activities and participate to 3D Modelling reviews

E - Construction and start up

▪ Provide technical and engineering support to construction Team

▪ Perform site engineering activities during construction and commissioning phases.

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading global engineering and project management consultancy embarking on large-scale infrastructure and environmental projects.

*Please note that this role will be hired on a long-term contract to support our client's project.

*Work Location: West

*Salary range: $6,000 - $7,200

About the role:

· Lead the site supervision team on all the Civil and Structural and Building Construction works.

· Assist Chief Resident Engineer and Construction Manager on all Civil & Structural site inspection issues, contract related matters and support the identification of defects and supervise rectification works.

· Address and respond to all Contractor’s RFI’s and technical submittals. Other work scopes include but not limited to assess method statements/instrumentation reading, coordinate with other discipline engineers and liaise with design team/QP from HQ.

· Attend all site/project related meetings, discussions with clients and/or Contractors and to lead in technical and work progress discussions.

About you:

· Good graduate Degree in Civil & Structural Engineering, preferably recognised by the PE Board, Singapore.

· Minimum 10 years of construction experience in supervising civil and structural works in water/used water treatment works.

· Registered with IES as Resident Engineer (Civil).

· A person with good communication and leadership skills.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading international chemical manufacturing company.

About the role: The Production Engineer is responsible for improving the production technology of the upcoming plant.

Responsibilities:

• Develop, review, and update all process control documents, procedures, and operation condition sheets in consultation with Production Superintendent and Day Supervisors from Operation.
• Identifying, analyzing, troubleshooting and improving process efficiency, equipment performance, product yield, capacity, quality, process material uses and utility consumption.
• Manage and improve process control system (DCS, SIS) and process data logging system.
• Support trial production and test run of new grades, new processes and equipment with the Production Technology Engineer.
• With a feasibility study, optimize plant operating efficiency, yield optimization, and energy conservation. Then, conduct the necessary field tests to verify the result.
• Provide technical support for Silo & Packaging process, including corrective measures for customer complaints in a technical viewpoint
• Lead process safety assessment (HAZOP, LOPA, etc.) and support HSE department technically.
• Submit reports’ findings and recommend modification, improvement, and potential investment projects such as debottlenecking, and environmental and cost reduction activities (i.e. reduction or more efficient usage of utilities).
• Coordinate with the technical section for process simulation, evaluation, investigation, performance & yield optimization
• Perform basic engineering design for all potential investment projects, prepare marked-up P&IDs and the required technical information for cost estimation purposes.
• Coordinate with the Technical department all plant improvement and modification activities working closely with the Technical Process engineer to prepare detailed
• engineering design, preparing specifications and requisitions for major equipment purchases, reviewing vendors’ documents, conduct hazard analysis, performance tests and commissioning activities.
• Coordinate with the Technical department for regular updates of P&ID’s, and instrument list, and equipment list.
• Communicate with the global process improvement team to build synergy for further technical updates of new plant.

About you:

• Bachelor’s degree in science, technology, or engineering.
• Minimum five (5) years of relevant engineering/production work experience in chemical industry.
• Experience in designing or optimizing the process control system of chemical plants.
• Basic Engineering Skill with utilizing process and instrumentation diagram (P&ID).
• Knowledge of mass and heat balance calculations of chemical plants.
• Demonstrated skill to in leadership, developing others, and working in a team-based environment.
• Outstanding verbal and written communication, presentation, interpersonal, creative thinking, consulting, and analytical skills.
• Excellent communication skills
• Ability to prioritize work to manage multiple projects to meet deadlines.
• Excellent problem-solving/decision-making skills.
• Ability to multi-task

Preferred qualifications:

• Master’s degree in chemical engineering
• Knowledge and experience in chemical process simulations (e.g. polymerization, other reaction processes, distillation, drying, and so on)
• Technical understanding of polymer extrusion process
• Knowledge of DCS programing and parameter tuning (PID control)
• Experience in lean manufacturing methods (e.g. 5S, Six Sigma, Kaizen, TPM)
• High proficiency in Excel including VBA, macros, or other related software engineering tools.
• Experience with leading Capex projects
• Experience with Management of Change (MOC), Process safety assessment (PHA, HAZOP, LOPA, FMEA, QRA, etc.), and Root Cause Analysis (RCA).

*Please note that only shortlisted candidates will be contacted

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

About our client: Our client is a leading international chemical manufacturing company.

Work Location: Jurong Island (company transport provided)

About the role:

• Oversee, manage, and supervise Company’s in-house and external Contractors for all mechanical maintenance works related to planning and execution of:

(a) daily maintenance [preventive, corrective, & breakdown maintenance],

(b) transition maintenance,

(c) turnaround maintenance and

(d) upgrading and improvement related to maintenance

• Ensure all mechanical maintenance activities are carried out in accordance to the Company’s
• HSEQ Standards & Maintenance Management System, statutory requirements and best industry practices.
• Establish, continually improve & execute Company’s maintenance management system in a safe, efficient, and effective way to achieve highest equipment reliability & availability
• objective.
• Update and maintain accurate maintenance records in order to provide good maintenance history for data analysis and troubleshooting purposes.
• Conduct root cause analysis to eliminate equipment/ system defect and take appropriate preventive/ corrective measures.
• Optimize & manage mechanical maintenance inventory level of critical & non-critical equipment spare parts.

About you:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.
• An aptitude for and interest in chemical process
• Analytical skills
• Ability to work well under pressure
• Good communication skill and able to collaborate with different functions
• Problem-solving skills

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

JOB SCOPE

To be able to manage and execute the company projects in building construction which covers:

• Ability to oversee the entire process and knowledgeable in project management relating to all operational and administration procedures
• Carry out project planning, cost control and project documentation
• Provide the direction in construction planning, coordinate works with sub-contractors, Client and Consultants to ensure overall construction progress based on schedule of works
• Ensure timely and smooth progress of works
• Ensure quality of works is achieved and safety & environmental regulations are complied with
• Ensure project activities complied with the Company’s ISO system
• Lead a team of project staff

JOB REQUIREMENTS

• Dynamic and motivated personality with good communicative and interpersonal skills
• shall be qualified, competent and experienced with tertiary qualification in construction, recognised either by the respective Professional Bodies, professional institutions or Building and Construction Authority.and with experience managing and co-ordinating large-scale projects effectively, and with experience performing as a Project Manager role for industrial and/or large-scale developments.
• Good leadership to lead a team of project staff
• Proficient in using Microsoft Office and familiar with Microsoft Project
• Possess Construction Safety Course for Project Manager Certificate
• Mandrian speaking is esstional knowledge due to coordinate with Chinese investor and owner.

At Henkel, you can build on a strong legacy and leading positions in both industrial and consumer businesses to reimagine and improve life every day. If you love challenging the status quo, join our community of over 47.000 pioneers around the globe. Our teams at Henkel Adhesive Technologies help to transform entire industries and provide our customers with a competitive advantage through adhesives, sealants and functional coatings. With our trusted brands, our cutting-edge technologies and our disruptive solutions, you will have countless opportunities to explore new paths and develop your skills. Grow within our future-led businesses, our diverse and vibrant culture and find a place where you simply belong. All to leave your mark for more sustainable growth.

Dare to make an impact?

YOUR ROLE

• Drive implementation of Portfolio Management initiatives across Henkel Adhesive Technologies
• Take ownership for end-to-end responsibilities to identify business problems, analyze root causes and interdependencies, develop solutions and implement them
• Collaborate with different stakeholders on scouting the key business problems, shaping them into actionable projects ensuring necessary change management
• Support transitioning of the Henkel Adhesive Technology organization to data-driven decision-making via developing the Adhesives Data & Analytics platform
• Participate, drive definition and execute the Product & Technology Management strategic change agenda in collaboration with Adhesive Technologies and corporate functions and enable the key use cases (e.g. value-based pricing, value selling etc.)

YOUR SKILLS

• Minimum 5 years experience in Product Management, Marketing, Strategy, Application Engineering or related area with proven track record of self-driven transformational achievements and completed projects, leadership experience is a plus
• Analytical skills including understanding of relevant technologies, brands, applications, product profitability and good knowledge of financial models
• Familiar in technical IT literacy incl. SAP knowledge, PowerBI and other data analytics and visualization applications
• Strong presentation, communication and influencing skills to various audiences and key business stakeholders in both virtual and real settings
• Self-driven individual with open minded and performance oriented attitude with customer centricity mindset
• Fluent English language skills

At Henkel, we come from a broad range of backgrounds, perspectives, and life experiences. We believe the uniqueness of all our employees is the power in us. Become part of the team and bring your uniqueness to us! We welcome all applications across different genders, origins, cultures, religions, sexual orientations, disabilities, and generations.

Job Summary:

We are seeking an experienced Creative Director to drive design excellence across the company's digital platforms and marketing initiatives. This leadership role combines oversight of the UI/UX design team responsible for web and mobile app design, with the management of the graphic design team responsible for a wide range of visual assets, including event key visuals, logos, banners, posters, and more. Additionally, the role involves planning and executing exclusive client events aimed at high-net-worth individuals, as well as overseeing both internal and external company activities.

Key Responsibilities:

1. UI/UX Design Leadership:

• Lead and manage the UI design team, overseeing the design of web and mobile applications, ensuring that the company’s digital experiences are both user-friendly and aesthetically engaging.
• Contribute directly to product design by creating wireframes, prototypes, and high-fidelity UI designs that reflect the needs of users and align with business goals.
• Conduct user research, usability testing, and gather feedback to continuously refine and optimize user interfaces.
• Collaborate with product managers, developers, and other cross-functional teams to ensure designs are seamlessly integrated into products.
• Maintain consistency and quality across all digital products, ensuring a cohesive design language and visual identity.

2. Graphic Design Leadership:

• Lead the graphic design team, taking full responsibility for the company’s visual design initiatives, including but not limited to event key visuals (KVs), logos, banners, posters, brochures, and promotional materials.
• Ensure all graphic design work aligns with the company’s branding and overall creative direction.
• Collaborate with marketing and product teams to develop compelling visuals for online and offline campaigns, ensuring brand consistency across all touchpoints.
• Create and manage the company’s graphic design assets library, ensuring that all materials are easily accessible and up-to-date.

3. Event Planning & Execution (High-Net-Worth Client Activities):

• Lead the planning, design, an exclusive series of activities and events targeted at high-net-worth clients, designed to build and maintain strong relationships with key stakeholders.
• Coordinate internal and external events, ensuring that they are designed and executed flawlessly in line with the company’s objectives.
• Collaborate with the marketing and PR teams to ensure all events have strong visual elements, including event branding, invitations, and promotional materials.
• Manage logistics and oversee creative processes for all event materials, from digital invitations to venue design and event collateral.

4. Cross-Functional Collaboration & Leadership:

• Provide leadership, guidance, and mentorship to both the UI/UX and graphic design teams, fostering a collaborative, creative, and results-driven environment.
• Work closely with cross-functional teams (product, marketing, sales, etc.) to ensure design solutions meet business objectives and contribute to company success.
• Oversee project timelines, resource allocation, and design workflows, ensuring that deadlines and objectives are met efficiently.
• Stay up-to-date with the latest design trends, tools, and technologies, ensuring the team maintains a cutting-edge design approach.

Requirements:

• Bachelor’s degree in Graphic Design, Interaction Design, Visual Communication Design, or a related field.
• 10+ years of experience in both UI/UX and graphic design, with at least 4 years in a leadership or team management role.
• Proven experience in designing for web and mobile applications, with a portfolio showcasing high-quality UI/UX and graphic design work.
• Expertise in design tools such as Adobe Creative Suite (Illustrator, Photoshop, XD), Sketch, Figma, and other industry-standard design tools.
• Strong understanding of user-centered design principles, usability, and accessibility standards.
• Experience in leading and mentoring design teams, with the ability to foster creativity and achieve business objectives.
• Exceptional attention to detail, with the ability to balance creativity with practicality.
• Strong project management skills, with the ability to manage multiple projects and teams simultaneously while meeting deadlines.

Preferred Qualifications:

• Experience designing and executing visual materials for high-net-worth client events or luxury brand initiatives.
• Knowledge of HTML/CSS or front-end development is a plus.
• Experience working in Agile development environments is an advantage.
• Strong communication skills with the ability to present and articulate design decisions to stakeholders at all levels.

• Mon-Fri 10am – 7pm
• $3500 - $6000 gross
• Location: Chinatown
• Attractive benefits

Job Description:

ULTRA TECHNOLOGY is on the lookout for career driven individuals working towards

financial freedom while pursuing a work life balance. We need someone who is confident

and passionate in their work and is able to assist their clients to reach new heights in their

business growth. If you are excited to take up this challenge and looking forward to achieve

a limitless income ceiling, we are looking for you!

Responsibilities:

• Build new client accounts and grow the existing portfolio of clients
• Maintain good relationship with existing customers while sourcing and developing new accounts
• Following up with the corporate leads provided
• Undertake the entire sales process and facilitate backend admin with progress
• Negotiating terms of sales and agreements and closing sales with customers
• Run outdoor sales appointments
• Identifying and seizing new revenue opportunities

Job Requirements:

• Able to communicate efficiently, able to work individually and as a team player
• Proactive, goals driven, customer-oriented and confident
• Great vision without great people is irrelevant. Make a difference and send in your application now!
• 1+ years of sales experience.
• Excellent customer service and sales skills.

We are looking for a proactive and service-oriented individual to implement IT initiatives and deliver IT operations excellence for our airport. The candidate will be responsible for requirements analysis, technical assessment, project management, solution deployment, operation management of IT
solutions and IT Managed Services.
The candidate will be expected to perform the following roles & responsibilities:

• Work closely with various airport stakeholders, both internal and external, to gather user requirements and deliver solutions to the users.
• Work with internal technical teams and vendors to propose overall technical solutions and key performance indicators to measure success.
• Perform proper project and change management to ensure delivered solutions meet technical, functional, performance, and business requirements.
• Manage 24/7 operations, maintenance, compliance, and renewal of our IT systems to support operations.
• Perform, review, and enhance business and IT processes as part of the continuous improvement effort

Requirements

• An accredited Bachelor’s degree in Information Systems / Technology, Computer Science, Systems Engineering, or related discipline.
• Certifications in IT Service Management (ITSM) and IT Project Management will be preferred.
• Demonstrated knowledge in Networking, System Administration, and Cyber Security is a plus.
• Minimum 2 years of work experience in the related technical domains and industry.
• Strong analytical and project management skills.
• Good communication, verbal, written, and presentation skills to effectively describe and demonstrate proposed solutions to internal and external parties.
• Strong team spirit and sense of responsibility, good at discovering and solving problems.
• Self-motivated
• This role is a 12-months(renewable) contract.

Khaty Zainal

R22111204

BGC Group Pte Ltd(Outsourcing)

EA 05C3053

About our client: Our client is a leading chemical manufacturing company that is expanding their exsiting operations in Singapore.

About the role: The Chemist is part of the pioneer team in the startup of the new production line, the Chemist is responsible for setup of QC Laboratory at new site, including management and training of Laboratory analyst, Laboratory system establishment and management to achieve safe and stable commissioning and startup of the new plant.

Work Location: Jurong Island (company transport is provided to and from Jurong East MRT station)

Responsibilities:

• Interpret laboratory results that are outside of the technical ability of the Lab Analysts.

• Review all process and final product test results to check for validity and possible quality-related issues.

• Assist quality lab manager in classification for final product and compounding lots.

• Assist quality lab manager to develop and implement QC specifications and standards.

• Assist quality lab manager to establish lab system according to HSEQ requirements.

• Conduct method development and validation, review and upkeep SOP of test procedures, calibration procedures and analytical instruments.

• Analyse, review and troubleshoot reliability issues of laboratory equipment and analysis problem and develop practical solutions.

• Liaise with vendors to troubleshoot and maintain laboratory equipment.

• Develop, implement, and follow calibration plan for equipment to ensure lab data is always accurate, consistent, and repeatable.

• Manage lab external agency audits and management systems certification compliance.

• Support Manufacturing, Quality, Sales, and Product Management functions.

• Assist lab manager, production, or other departments with special projects, as needed.

• Lead Special lab Projects and new grade trials.

• Implement and participate in safety and quality improvement activities.

• Evaluates reported results for consistency with plant process conditions.

• Trains laboratory personnel on new instruments and procedures as needed.

• Conduct internal audits on the proper execution of test methods.

• Liaise with Supplier, execute procurement process and receipt.

• Monitor and follow up on daily lab analysis result for accuracy and troubleshooting.

• Task as assigned by QC Manager.

About you:

• A bachelor's degree in chemistry or related field.

• Minimum 5 years’ experience in analytical lab with manufacturing facility

• Ability to work well under pressure in a fast-paced environment.

• Experience required in new Laboratory set up, system establishment.

• Experience required with GC, ICP, GC-MS, Antek, KF, IR, UV, Extruder, DSC etc.

• Experience required in statistical process control and statistical quality control.

• Experience preferred in polymer testing and analytical techniques.

• Extended knowledge of computers and software applications (i.e. Microsoft Office, spreadsheets, databases, NWA, etc.)

• SAP & LIMS experience preferred.

• Very strong oral and written communication skills

• Self-motivated and detail oriented

• Ability to multitask and prioritize work.

• Strong problem-solving, critical thinking and analytical skills.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Duties & Responsibilities:

• Routine patrolling and clocking to ensure safety and security
• Respond to emergency incidents/accidents at site
• Manage disorderly conduct and threatening behaviour
• Observe, inspect, and report unusual behaviour or safety/fire hazard
• Manage driveways to ensure smooth flow of traffic
• Monitor CCTV
• Crowd Control

Requirements:

• Minimum 1 year of working experience in related field
• Rotating day and night shift work (including weekends and public holidays)
• Able to communicate and write simple English for recording daily incidents
• Positive working attitude
• Possess valid security license registered with PLRD
• Completed WSQ Security modules in:

a) Handle Security Incidents and Services

b) Provide Guard and Patrol Services

c) Recognise Terrorist Threat or equivalent

• Only Singaporeans / Permanent Residents

Package:

• Gross: $2400 to $2800
• AWS & annual variable bonus
• Lunch provided
• Medical benefit

COMPANY DESCRIPTION

THKMC was incorporated on 13 October 2011 as a charity to provide multiple social and welfare services to the community at large, and achieved an Institute of Public Character (IPC) status on 18 November 2011. THKMC is the charitable arm of Thye Hua Kwan Moral Society, which lives by the mission To Serve Mankind to help anyone who needs help regardless of their race, religion, colour, language, creed and culture. THKMC today serves more than 70,000 beneficiaries through more than 70 programmes across five Services, which include Disability, Early Intervention for Children, Family, Seniors' Community, and Therapy.

RESPONSIBILITIES

Business Continuity Planning:

• Develop and update business continuity plans to address potential threats and risks to the organization's operations.
• Collaborate with key stakeholders to identify critical business processes and establish recovery time objectives.
• Audit the process for regularly reviewing and updating the BCP to reflect changes in the business environment, technology, or staffing.

Risk Assessment:

• Conduct regular risk assessments to identify potential vulnerabilities and areas of improvement in business continuity strategies.
• Analyze and prioritize risks, providing recommendations for mitigation and preparedness measures.

Emergency Response:

• Develop and oversee emergency response protocols and procedures to ensure a swift and effective response to crises.
• Coordinate with relevant teams to conduct regular drills and simulations for emergency scenarios.

Training and Awareness:

• Provide training sessions to employees at all levels to enhance awareness and understanding of business continuity plans and procedures.
• Foster a culture of preparedness and resilience throughout the organization.

Incident Management:

• Establish and lead an incident management team to respond promptly to disruptions, minimizing impact and downtime.
• Coordinate communication strategies to keep stakeholders informed during incidents.

• Bachelor's degree in business, Risk Management, or related field. Master's degree or professional certifications in business continuity (e.g., CBCP, CBCI) is a plus.

Job Description:

▪ Attend show rounds or site visits

▪ Prepare tender proposal write up and accurate costing and price calculations within stipulated deadlines

▪ Plan, deliver, and submit tenders in a timely and professional manner

▪ Prepare ad hoc quotations

▪ Prepare and present effective sales presentations

▪ Follow up with business opportunities and new sales channel

▪ Manage existing and potential client portfolio

▪ Monitor contract renewal and follow up with clients on renewal needs

▪ Manage ERP system and work closely with accounts to ensure system is in line with department requirements

Job Requirement:

▪ 2 years’ experience as Business Development Executive

▪ Tender preparation and submission experience

▪ Quotation preparation and submission experience

▪ Presentation experiences

▪ Client management experience

▪ Meticulous and team player

We are seeking to recruit an architectural assistant / project manager. The successful candidate will work as a member of project teams and will have responsibility for supporting the team in the development of designs, preparation of construction information, construction support and contract administration

Requirements

· Singapore Citizen,Permanent Resident or Malaysian

· Recognized architectural qualifications

· Minimum 1-year relevant practical experience

· Prefer NUS graduate

· Degree / master’s in architecture

· Ability to work with clients, consultants, and contractors.

· Knowledge of building codes and regulations.

· Knowledge of Revit Autocad.

· Able to work in teams

· Salary range – S$4,000 to S$5,000