Job Description

• Monitor, track, and provide timely project progress reports to the management
• Report to Project Manager / Site Manager for the arrangement of work
• Prepare the specification and data sheet as per codes / standards, project, and client’s requirement,
• Responsible of the submission and approval of materials in compliance to the specification;
• Responsible monitoring of work progress on site
• Co-ordinate the inspection work on site and installation works
• Handling technical and engineering problems on site
• Ensure site safety and proper execution of site work procedure on site
• Monitor and co-ordinate the works of subcontractors

Requirements

• Degree or Diploma in Mechanical Engineering / Building / Project Management or equivalent.
• Min. 2 years relevant working experience in the construction industry (building facade).
• Strong leadership, organizational, planning, and interpersonal skills.
• Good working attitude with a high level of professionalism, integrity, initiative, and being a team player.
• Knowledge and/or experience in contractual management is an added advantage.

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

• 5 days, Near Boon Lay, transport provided
• 1yr contract, completion bonus
• Staff benefits entitlement
• Salary: $3000 - $3500 basic
• Able to start within short notice

Job Description:

• Compile and breakdown contract negotiation language changes preferable using any AI to track and consolidate contract language between original vs. revised.
• Other general support includes planning and purchasing such as emailing, communicate with suppliers for committed dates, generate report, etc.
• Any other general task assigned by the purchasing & planning supervisor.

Job Requirements:

• Minimum a Diploma in Supply Chain Management, Business Administration or related fields.
• No experience can apply as on-the-job training will be provided
• Willing to learn and enjoy interacting with internal/external customers
• Minimum 1 year of experience in purchasing and planning.
• Able to communicate in English and Mandarin as this role will involve liaising with mandarin-speaking suppliers overseas.
• Able to work effectively and independently under pressure.
• Able to meet deadlines and has strong follow up skills.
• Detail oriented and high degree of accuracy.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Job Responsibilities:

• Responsible for driving strong sales growth to achieve sales and profit targets in assigned territories, industries and channels
• Develop new distributors in assigned territories
• Build and maintain strong relationship with distributors, direct customers, purchasers and end users
• Provide sales & product trainings to distributors and end-users
• Work closely with key customers/distributors to plan, implement marketing strategies and promotional programs in line with company’s direction
• Recommend appropriate pricing strategies for all product lines.
• Gather and analyse market and competitors information

Job Requirements:

• Highly sales-focused individual who is extremely self-motivated and keen to make increasing sales and be rewarded for success
• Experience in export sales is a must. Experience in chemical product sales with regional sales function in South East Asia will be advantageous.Previous sales experience in marine, oil & gas, industrial sectors, distributor management would be advantageous
• Regional selling experience in South East Asia preferred
• Excellent selling, negotiation and relationship building skills
• You MUST believe that SALES is a NUMBERS game, and achieving targets is the primary objective
• All education backgrounds considered
• Willing to travel

Job Description

• Assist with administration within the Business Development Team.
• Support the EV Team on day to day operation and administrative duties.
• Analyse and report on datas collected from various departments.
• Communicate with various stakeholders to ensure smooth operations for Business Development Team and EV Team.
• Point of contact in Singapore when the Team is overseas.
• Assist and sorting daily attendance and send out attendance report weekly.
• Assist in organizing business travel & accommodation (eg., Application of VISA, booking and schedule flight and hotel etc.).
• Other ad-hoc assignments as assigned.

Requirements

• Minimum with Bachelors Degree in Business or any related field.
• Singaporeans are preferred.
• At least 1 year of experiences with Project Coordination, Preperation of Tender Documents, Liaising with various stakeholders, and Internal Performance Analysis.
• Proficient in the use of Microsoft Office (i.e. Excel, Words, Powerpoint & Outlook).
• Report generation with a good eye for details to ensure report accuracies.
• Meticulous sense of responsibilities and good working attitude & follow-up skills.
• Good interpersonal skills and being able to work in a fast-paced environment.
• Enjoy working with all levels of employees.
• Process good communication and written skills.

Business Development Assistant Manager Job brief

We are looking for an ambitious and energetic Assistant Business Development Manager to help us expand our clientele. You will be the front of the company and will have the dedication to create and apply an effective sales strategy. The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.

Business Development Assistant Manager Responsibilities

· Develop a growth strategy focused both on financial gain and customer satisfaction

· Conduct research to identify new markets and customer needs

· Arrange business meetings with prospective clients

· Promote the company’s products/services addressing or predicting clients’ objectives

· Prepare sales contracts ensuring adherence to law-established rules and guidelines

· Keep records of sales, revenue, invoices etc.

· Provide trustworthy feedback and after-sales support

· Build long-term relationships with new and existing customers

· Develop entry level staff into valuable salespeople

· Developing growth strategies and plans

· Managing and retaining relationships with existing clients

· Increasing client base

· Having an in-depth knowledge of business products and value proposition

· Writing business proposals

· Negotiating with stakeholders

· Identifying and mapping business strengths and customer needs

· Researching business opportunities and viable income streams

· Following industry trends locally and internationally

· Drafting and reviewing contracts

· Reporting on successes and areas needing improvements

· Contacting potential clients to establish rapport and arrange meetings.

· Planning and overseeing new marketing initiatives.

· Researching organizations and individuals to find new opportunities.

· Increasing the value of current customers while attracting new ones.

· Finding and developing new markets and improving sales.

· Attending conferences, meetings, and industry events.

· Developing quotes and proposals for clients.

· Developing goals for the development team and business growth and ensuring they are met.

· Training personnel and helping team members develop their skills.

Business Development Assistant Manager Requirements

· Proven working experience as a business development manager, sales executive or a

· relevant role

· Experience in sales, marketing or related fields.

· Strong communication skills and IT fluency.

· Ability to manage multi-task.

· Excellent organizational skills.

· Ability to flourish with minimal guidance, be proactive, and handle uncertainty.

· Proficient in Word, Excel, Outlook, and PowerPoint.

· Comfortable using a computer for various tasks.

· Time management and planning skills

· The ability to work under pressure.

· Availability to work within opening hours (e.g. evenings, holidays, weekends).

Job Description & Responsibilites

• Align organizational IT strategy with the overall customer experience strategy to ensure a seamless user journey
• Coordinate resource management (manpower and assets) strategies with business objectives across various initiatives.
• Establish measures to improve vendor management capabilities within the orgainisation.
• Callaborate with stakeholders to evaluate and prioritize the development needs of users based on organisational goal and project priorties to maximize business cost efficiency.
• Optimize and enhance existing operational standards and procedures.
• Integrate newly enabled IT processes and systems across-functional teams.
• Partner with internal IT departments and third-party developers across Asia to deliver cohesive solutions.
• Assist in documenting test results to support the efficient resolution of problems and to capture defect data.

Requirements

• Bachelor's Degree or equivalent qualification.
• 5 to 7 years of business solution analysis or project management experience.
• Experience with Finance & ERP systems (Microsoft D365 and Oracle ERP) is preferred.
• Experience in web-based technology including HTML, web-based services APIs, JSON, XML.
• Familiar with different EDI solutions or APIs.
• Experience with data analytics & business intelligence is a plus.
• Strong expertise in project management, with robust document-writing, communication, and coordination abilities.
• Exceptional analytical and problem-solving skills combined with a strategic mindset.
• Customer-centric approach to IT delivery to enhance user satisfaction.
• Demonstrated experience in vendor souching, negotiations, and contract management.
• Candiate is required to interact with stakeholders in Hong Kong, hence the ability to speak Cantonese fluently is a must.

WE NEED EXPERICEND FOR METAL WOKS , ALUMINMUM WORKS , WETRADE WORKS AND TILES WORKS FOR CONSTRUCTION (HDB / CONDO ) , NEED HAVE EXCELLENT IN CHINESE AND ENGLISH COMMICATION SKLII AND ACKNOWLEGE DESIGN WORK ,NEED TO GO THROUGH WITH SITE COODINATOR FOR BQ AND MATERAILS ORDER AND DRWAING SUBMISSION WORKS ，ALLOW TO FOLLOW AND COORDINATE WITH SITE WORKS AND PROGRESS WITH MAINCON , SITE MEETING

Responsibilities:

· Plan, organise and set up site and sequential job planning for the smooth execution of projects to achieve cost, quality, timelines and customer satisfaction objectives.

· Manage construction activities and progress independently.

· Carry out resource planning for project such as site staff and workers, subcontractors and to ensure their effective deployment.

· Attend project meeting, project team meeting and updates on progress.

· Control materials, tools and equipment ordered and delivered.

· Manage all site staff and subcontractor schedule.

· Ensure adequate quality control measures either via on-site/off-site inspection and all completion/pre-handover inspections.

· Check the approved /correct materials are used within specifications/certifications submitted, recorded and approved by vetting Singapore Agencies.

· Proactively identifies changes in project scope and ensures appropriate measures are taken

· Administers Submittal Review process between Subcontractors/Suppliers and design team.

Requirements

· Able to understand electrical drawing, specifications and requirements skills and experience required.

· Degree in Electrical engineering or diploma holder with minimum 5 years of relevant experience.

· Worked in on A & A projects and/or Design and Build in various type of projects with different nature.

· Technically competent across the full range of electrical systems, ELV System, Project Lighting, Building Intelligent System and relevant skill set and competencies.

· Proven track records of successful project completion on time and on budget.

· Good interpersonal and communication skills to interact with all level of staff.

· Possess the relevant safety certifications like SCWSH / BCSS.

· Ability to coordinate and communicate with relevant site people to execute work Excellent time management and teamwork skills.

The Foundations of Thermodynamics Group is a newly formed group in the School of Humanities at the Nanyang Technological University Singapore led by Nanyang Assistant Professor of Philosophy Eugene Y. S. Chua. It provides a space for research on all aspects of the conceptual foundations of thermodynamics, with particular focus on understanding the conceptual foundations of thermodynamics beyond the classical domain, e.g., in the quantum and relativistic domains, or how thermodynamics relates to other non-fundamental domains such as fluid dynamics and neuroscience.

The group is seeking a skilled and detail-oriented Project Officer to oversee the management and administration of the group’s day-to-day activities. The successful candidate will be responsible for ensuring the smooth coordination of project activities, managing budgets and project finances, monitoring progress, and ensuring compliance with grant requirements. This role requires excellent organizational and communication skills, as well as the ability to work collaboratively with researchers, stakeholders, and funding bodies.

Key Responsibilities:

• Managing the day-to-day operations of the group’s grant
• Developing and maintaining project documentation, including work plans, progress reports, and budgets.
• Monitoring project expenditures to ensure compliance with grant guidelines
• Processing claims and expenditures in accordance with university guidelines
• Liaising with funding bodies, researchers, and collaborators on group matters
• Tracking project milestones and deliverables, ensuring timely completion and reporting
• Organizing meetings, workshops, and events related to the project.
• Assisting in preparing funding reports, renewal applications, and project evaluations.

Job Requirements:

• Bachelor degree in philosophy or equivalent professional experience in project management.
• Experience managing grant-funded projects or research initiatives.
• Strong organizational and problem-solving skills, with an ability to manage multiple priorities.
• Proficiency in project management tools and software.
• Excellent written and verbal communication skills.
• Familiarity with financial reporting and budget management.
• Attention to detail and ability to work independently.
• Knowledge of philosophy and physics is a plus.

We regret to inform that only shortlisted candidates will be notified.

Responsibilities:

• Industrial Trends & Insights: Analyze market trends, data, and customer insights to generate ideas for NPD.
• Product Positioning: Define competitive positioning and unique selling propositions (USP).
• NPD Leadership: Oversee the entire NPD process, from concept to completion, including reformulations.
• Cross-functional Collaboration: Lead efforts with Regulatory, Marketing, Supply Chain, Manufacturers, R&D, and Quality for timely product delivery.
• Supplier Liaison: Source and coordinate with contract manufacturers and formulators; serve as the main contact for NPD discussions.
• Formula & Compliance: Review formulations and ensure ingredient/design compliance with regulations.
• Product Testing: Ensure understanding of product challenge tests, stability, and compatibility studies.
• Costing & Pricing: Research market prices, generate product costing, and propose pricing.
• Product Introduction: Conduct product training for marketing teams and sales leaders.
• Post-launch Management: Analyze product performance, manage feedback, and provide technical responses.
• CAPA Response: Address corrective and preventive actions raised by Quality.
• Standard Procedures: Contribute to and implement standard procedures aligned with industry and QMS standards.
• Other Duties: Perform additional tasks and projects to meet company goals.

Requirements:

• Degree in Cosmetics, Chemistry, or a related field.
• Minimum of 2 years of working experience in product development or management within the cosmetics or skincare industry.
• Preferred Candidates with an interest in marketing within beauty, skincare, personal care, or similar industries is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

The Career Conversion Programme (CCP) (Train-and-Place with Commitment to Hire) for Advanced Biopharmaceuticals Manufacturing Executives/Professionals is a talent development programme aimed at building the next generation of skilled manpower for Singapore’s Biopharmaceuticals manufacturing industry in anticipation of hiring demand.

The training programme consists of 15 months of local attachment with GSK. Due to the nature of the programme, we can only consider Singapore Citizens and Singapore Permanent Residents. For more information, please visit Career Conversion Programmes (CCP) for Individuals

Looking to gain valuable real world work experience and help positively impact the health of billions of people? Apply for a GSK Traineeship today!

This offers you the opportunity to kickstart your career – to take on a real role with genuine impact! You’ll take on challenging, serious work on live projects or assignments. You’ll also get to learn from us, develop your skills and gain valuable experience for wherever the future takes you.

What will you do?

• Receipt of materials/chemicals from central warehouse, store and issue to production on timely manner.
• Performing SAP transactions in alignment with physical movement of goods.
• Ensure adherence to GMP requirement such as sanitization of materials, cleaning of classified and non-classified area.
• Receive, handling and management of process waste.
• Timely review temperature graphs from temperature sensors (PEMS and AMS)
• Maintain inventory accuracy and proper documentation (cycle count).

What will you learn?

• cGMP requirement in Biopharma manufacturing environment.
• Zone classification and requirements (cleaning and gowning).
• Inventory management (Kanban and SAP).
• Coordination between requestor, warehouse, and material planner (if shortage of materials)
• Exposure to Biopharma production materials and handling manner (material sanitization method)

What are we looking for?

• Curious, willing to learn and adaptable to changes.
• A lively interest in biopharma industry.
• Good interpersonal skills
• Disciplined and work with integrity.

What do we offer you?

• Working hours: 0800 to 1700, Monday to Friday.
• Subsidized cafeteria service.
• Comprehensive network of company transport serving multiple MRT stations

Responsibilities:

• Industrial Trends & Insights: Analyze market trends, data, and customer insights to generate ideas for NPD.
• Product Positioning: Define competitive positioning and unique selling propositions (USP).
• NPD Leadership: Oversee the entire NPD process, from concept to completion, including reformulations.
• Cross-functional Collaboration: Lead efforts with Regulatory, Marketing, Supply Chain, Manufacturers, R&D, and Quality for timely product delivery.
• Supplier Liaison: Source and coordinate with contract manufacturers and formulators; serve as the main contact for NPD discussions.
• Formula & Compliance: Review formulations and ensure ingredient/design compliance with regulations.
• Product Testing: Ensure understanding of product challenge tests, stability, and compatibility studies.
• Costing & Pricing: Research market prices, generate product costing, and propose pricing.
• Product Introduction: Conduct product training for marketing teams and sales leaders.
• Post-launch Management: Analyze product performance, manage feedback, and provide technical responses.
• CAPA Response: Address corrective and preventive actions raised by Quality.
• Standard Procedures: Contribute to and implement standard procedures aligned with industry and QMS standards.
• Other Duties: Perform additional tasks and projects to meet company goals.

Requirements:

• Degree in Cosmetics, Chemistry, or a related field.
• Minimum of 2 years of working experience in product development or management within the cosmetics or skincare industry.
• Preferred Candidates with an interest in marketing within beauty, skincare, personal care, or similar industries is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Develop corporate strategy papers and reports for the board of management
• Conduct country and market analyses across all business units to result in supportive concepts for regional strategy and business development
• Prepare and coordinate top-level management meetings and workshops
• Continuously track developments and news in the region with relevance to Bosch operations
• Take on ad-hoc tasks and projects

THIS IS A 2-YEARS RENEWABLE / CONVERTIBLE CONTRACT ROLE

The Centre Management System Support, Executive/Senior Executive is responsible for overseeing the upkeep, procurement & maintenance of all exhibits, audio-visual equipment, facilities and essential services for daily operations for centres/museums under Defence Collective Singapore (DCS).

RESPONSIBILITIES

• Maintenance Planning: Planning and implementation of building maintenance programs for architectural, electrical, and mechanical, exhibits and attractions AV lighting systems. Co-ordinate and liaise with internal and external vendors for the execution of maintenance services. Conduct joint inspection rounds with Specialists/Technical Officers on building/Exhibit/AV & lighting defects.
• Safety Compliance: Ensure compliance with safety equipment, work methods, and procedures. Promptly rectify any unsafe situations, adhering to Workplace Safety and Health (WSH) regulations. Be responsible for implementing Company’s SOP and policies including compliance to QEHS policies. Conducting regular checks on the entire building to ensure the prompt removal of fire hazards, proper functioning of fire escapes, fire doors, and obstruction-free access.
• Supervise Works: Control and supervise all AV Lighting and exhibition related works performed by Specialists/Technical Officers and contractors, including those carried out by tenant's fitting out contractors. Supervise and inspect the works of contractors and the works of the service providers (cleaning, housekeeping, landscaping, pest control, car park and security). To ensure contractors’ compliance to safety, regulations and level of standards set by DCS.
• Repairs and Emergency Situations: Responding to emergency situations & troubleshoot sound and video and ensuring prompt repairs of property facilities. Providing updates to Centre Management team with regards to the situation.
• Procurement: Manage budgetary control of expenditures including preparation of annual budgets and forecast. Conduct tender exercises for OPEX/CAPEX works such as replacement, upgrading or redevelopment works and manage such works according to timeline including putting up of documents and procurement for OPEX/CAPEX requests.
• Daily Operations: Responsible for the coordination of meetings and events such as logistics support, obtaining quotations, raising of invoices etc. Conduct regular inspection of the centre to ensure high standard of cleanliness and service are provided by term contractors related to cleaning, landscape, pest control etc.
• Reports: Monitor and report on the work progress of minor improvement projects or A&A work. Tabulate inspection report and plans for defects rectification.
• Project Management: Procurement of services as well as management of services and projects from inception, execution and to completion. Project lead to manage all aspects of project.
• Event Management: To provide audio, visual and media services for events and activities (e.g. Family Day, celebrations, etc). To help staff (hands-on) on setup of technology in the venues.
• Others: provide training to staff and students on the use of AV and lighting equipment, carry out any ad-hoc duties, handyman work, projects as assigned.

REQUIREMENTS

• Minimum diploma in the audiovisual technology, sound engineering, lighting design technology or any related field, such as digital media or related disciplines.
• Demonstrated ability to communicate effectively, including proficiency in clear, concise, and compelling oral and written communication in English.
• Demonstrated ability to work independently and under pressure and to manage multiple concurrent tasks and responsibilities while dealing with changing priorities.
• Possess strong working knowledge with maintenance work, local codes and regulations. Familiar with statutory requirements on building services, facility operations, maintenance, and safety.
• Withstand various strenuous activities such as frequent walking, prolonged standing, climbing ladders, bending, and kneeling without restriction.
• Able to work on rotating shifts, weekends, and public holidays.
• Relevant experiences in facilities management/MCST, ACMV, M&E Systems, building automation system (BAS), Certification as Fire Safety Manager will be an added advantage.

We currently have an opening for a Assistant Project Manager for interior fitting out work.

You must be competent with AutoCAD and SketchUp.

You are to assist our project team to oversee the successful completion of the project.

And because of the nature of your work, you are expected to do a Site Safety Supervisor course unless you already have completed such a course prior.

KEY DUTIES AND RESPONSIBILITES:

• Collaborate with key account managers to identify new business and grow relationships that assist in revenue generation for the organisation.
• Support or lead development initiatives of the identified new business strategies / opportunities.
• Develop and prioritize a list of target prospective clients for specific service sales and a strategy to achieve defined sales targets.
• Pursuing and opening a line of dialogue with prospective clients.
• Develop a strong relationship with the potential client’s relevant contact person, organize visits to the client’s facilities or to our facilities, showcasing our capabilities and identifying the service requirements.
• Develop sales performance metrics based on organisation service prices and cost structure approach.
• Securing a position to tender or quote for upcoming work with new potential and existing clients.
• Ensure the timely preparation of proposals for our CDMO & CMO services and efficient conclusion of manufacturing service agreement.
• Work with operations team to develop the potential and existing client’s required activities within target markets.
• Partner with operations and service delivery teams to develop accurate and timely quotations and proposals for your clients.
• Establish continuous market monitoring, identify trends, and liaise with operations team to develop new solutions.
• Maintain current knowledge of service capabilities and relationship network of stakeholder throughout the Organization.
• Develop intervention strategies to mitigate gaps in delivery of logistics services. Monitor any lapses in delivery of logistics services to clients.
• Any other activities as and when assigned by the Superior.

REQUIREMENT

• Excellent verbal / written communication and technical presentation skills.
• Interpersonal skills with the ability to interact with all levels of management, consultants, and clients, with highly developed presentation, negotiation, and persuasion skills.
• Possess extensive and recent experience in a similar senior sales position within the life sciences sector (preferably with a focus on CDMO & CMO services).
• Results focused, commercially aware, creatively and ability to understand clients’ and the organization operational requirements.
• Ability to develop innovative solutions for clients and have a strong aptitude to convert strategy into results for the organization.
• Ability to travel, present and promote capabilities, express initiatives and foster effective positive communication between clients and the organization.
• Ability to work independently with limited supervision.

EDUCATION & EXPERIENCE

• Minimum Bachelor of Science in biology, chemistry, biochemistry, microbiology, or similar relevant education.
• At least 6-8 years of relevant industry sales/business development experience.
• Knowledge of Formulation Development and Manufacture of pharmaceuticals.
• Experience in a Contract Development and Manufacturing Organization (CDMO) or Contract Manufacturing Organization (CMO) is an advantage.

• Develop and implement a comprehensive regional business development strategy aligned with the company's overall goals and objectives.
• Conduct in-depth market research and competitor analysis to identify and assess potential opportunities within the assigned region.
• Generate qualified leads through proactive prospecting, networking, attending industry events, and utilizing various marketing channels.
• Lead the development and delivery of compelling presentations and proposals that effectively articulate the value proposition of our products or services.
• Build and nurture strong relationships with key decision-makers, influencers, and potential partners across the region.
• Negotiate and close significant deals, ensuring profitability and adherence to company policies.
• Manage and develop a robust regional sales pipeline, monitoring progress and ensuring timely deal closures.
• Identify and establish strategic partnerships that drive market reach, brand awareness, and revenue growth.
• Develop and implement effective marketing and sales collateral specifically tailored to the regional market.
• Lead and mentor a team of regional sales representatives (optional, adjust based on structure).
• Analyze market trends, competitor activity, and customer feedback to inform strategic decision-making.
• Travel as required to attend industry events, network with potential partners, and meet with clients.

· Analysing current business processes, workflows and procedures to identify areas for improvement.

· Developing and implementing optimised processes and procedures to enhance efficiency, productivity and customer satisfaction.

· Collaborating with stakeholders to design and execute process improvement initiatives aligned with organisational goals.

· Monitoring and evaluating the effectiveness of implemented process changes, measuring key performance indicators and making necessary adjustments for continuous improvement.

· Stay updated on industry trends, emerging technologies and process improvement methodologies.

· Following specifications and calculations to create various technical drawings with CADD systems.

Job Responsibilities:

• Schedules meetings, prepares meeting agendas and takes meeting minutes
• Maintains project documentation, including contracts, permits, drawings and reports and ensures all documents are organized, up-to-date and easily accessible
• Serves as the main contact person for the project by taking calls, messages and handling correspondences with clients & external parties, where appropriate direct the correspondence or communication to the relevant Project Team members
• Facilitates communication among project stakeholders, including clients, contractors and internal team members
• Prepares and distribute project updates and reports
• Maintains diaries and arranges appointments for Project Director/Project Manager
• Collates information from Project Team members and prepare weekly/monthly Project Progress Report for submission
• Acts as a receptionist and/or meeting and greeting clients
• Provides project induction training to new members joining the Project Team and update the Project Organisation Chart as necessary
• Responsible for control & procure project office supplies & stationary with approval by the Project Control Manager
• Organises social activities such as appreciation luncheon or dinner with client or among project team members with instruction from the Project Director/Project Manager
• Implements and maintains document control procedures
• Oversees the entire lifecycle of documents, from their creation and distribution to their eventual archiving
• Categorises and organises documents based on their type, importance and relevance

Job Requirements

• Diploma or Degree in Engineering/HR/Administration
• Minimum 3 years experience in project work environment
• Familiar with PIMS or other document software control systems will be preferred
• Knowledgeable in Microsoft Office applications such as Word, Excel & PowerPoint
• Strong ability to be organised, keep a clear head and keep track of everything from deadlines to essential files
• Clear and friendly communication, engaging in conversations that create strong connections and build relationships
• Ability to take the initiative, work independently and seek for continuous improvements
• Honest and trustworthy, may handle sensitive project, client or eternal party information so important to exercise discretion maintaining confidentiality
• Strong advocate for teamwork
• Ability to cope with stress, deadlines and multitasking, often dealing with several people at once

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description

• Lead and manage a team of Sub-contractors for all addition and alteration (A&A) work
• Plan, organize, co-ordinate and implement A&A work timely and ensure compliance to all authority and client's requirement
• Liaise with sub-contractor and vendor for quotations and purchase orders
• Evaluate project requirements and generate feasible proposals for work completion
• Liaise with client's appointed officer on all issues related to the A&A and project work
• Preparation and submission of shop drawings, point schedule, materials, write-ups, and other necessary items for approval
• Track and manage project progress and submit progress claims
• Lead, coordinate, and execute testing & commissioning works for A&A works with proper documentation
• Conduct site surveys, attend meetings on-site, evaluate installation progress on-site
• To arrange and provide servicing & maintenance works for active sites

Requirement

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• At least 1~3 years of working experience in construction or retrofit project in BMS/ACMV/Electrical/ELV
• Good knowledge of Building Services (BMS, ACMV or Electrical or ELV) and project management
• Proactive individual who can work independently
• Good interpersonal and Communication skills
• Able to multi-task and achieve deliverables on schedule
• Able to generate project reports via Word, Excel, Powerpoint

We regret only short listed candidate will be notified.

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Internal Controls Assessment – Conduct reviews of internal controls to ensure they comply with JSOX (Japanese Sarbanes-Oxley) requirements. This involves evaluating the effectiveness and efficiency of control mechanisms, identifying any gaps or weaknesses, and recommending improvements. Additionally, ensure that all processes and procedures align with regulatory standards and best practices to mitigate risks and enhance operational integrity.
• Reporting and Documentation – Prepare detailed reports and documentation for risk assessments, audits, and compliance activities, ensuring accuracy and timeliness.
• Compliance Program Management – Manage compliance programs, ensuring all activities adhere to regulatory and internal standards.
• Risk Assessment Coordination – Actively coordinate and conduct detailed risk assessments across various operational activities, ensuring potential risks are identified and mitigated effectively.
• Lessons Learned Maintenance – Maintain and update a comprehensive database of lessons learned from past projects, facilitating continuous improvement and knowledge sharing.
• Any other duties to be asisgned from time to time

Pre-requisites:

• Degree in Accounting, Finance, Engineering or a related field
• Minimum 5 years of relevant work experience
• Prior compliance audit / Risk Management experience is preferred
• Self-motivated individual with a high level of integrity, drive and sense of urgency
• Strong collaboration skills and ability to work independently across different businesses units with different stakeholders
• Meticulous and mature with strong oral and written communication skills
• Strong analytical and problem-solving skills
• Ability to manage multiple tasks and meet deadlines

Company Overview:

Atera Water Pte Ltd is a water membrane technology startup based in Singapore, spun off from Nanyang Technological University. We specialize in the development of cutting edge and sustainable nanocomposite hollow fiber membranes designed to empower communities to tackle water challenges amidst climate change and high costs of advanced filtration membranes.

Atera Water is collaborating with the faculty of Material Sciences and Engineering at Nanyang Technological University and Singapore Institute of Technology to develop affordable membranes and low energy systems primarily targeted to replace traditional water treatment systems which utilises high amounts of chemicals and generate sludge that is harmful to the environment.

For more information on our technologies and solutions, visit our website at www.aterawater.com.

Position Overview:

We are seeking an experienced and driven Business Development Manager to lead our efforts in expanding our market presence and driving revenue growth. The ideal candidate will have a deep understanding of the water treatment industry, particularly in filtration membranes, and a proven track record in business development, sales, and strategic partnerships.

Key Responsibilities:

• Develop and execute comprehensive business development strategies to achieve sales targets and expand market share.
• Identify and pursue new business opportunities, including potential clients, markets, and partnerships.
• Build and maintain strong relationships with key stakeholders, including customers, industry partners, and government agencies.
• Conduct market research and competitive analysis to stay informed about industry trends and identify growth opportunities.
• Collaborate with the technical and product development teams to ensure alignment of business development efforts with company goals and product capabilities.
• Lead negotiations and close high-value deals with customers and partners.
• Represent Atera Water at industry conferences, trade shows, and other relevant events to promote our products and services.
• Prepare and deliver compelling presentations and proposals to prospective clients and partners.
• Provide regular reports and updates to senior management on business development activities, pipeline, and performance.

Qualifications:

• Bachelor's degree in Business, Engineering, Environmental Science, or a related field.
• Minimum of 3 years of experience in business development, sales, or a related role within the water treatment industry, with a focus on filtration membranes.
• Proven track record of achieving sales targets and driving business growth.
• Strong understanding of water treatment technologies and market dynamics.
• Excellent communication, negotiation, and interpersonal skills.
• Ability to think strategically and develop innovative solutions to complex business challenges.
• Strong analytical skills and ability to make data-driven decisions.
• Self-motivated, results-oriented, and able to work independently as well as part of a team.
• Willingness to travel as needed to meet with clients, partners, and attend industry events.

Why Join Us:

• Opportunity to work with cutting-edge technology in a rapidly growing startup.
• Be part of a passionate and innovative team dedicated to making a positive impact on the global water industry.
• Competitive salary and benefits package.
• Professional development opportunities and career growth potential.

Position Overview:

• We seek a skilled and experienced Financial Analyst with a background in the oil and gas industry, particularly in drilling and logging tool manufacturing, field service, and repair & maintenance operations. The ideal candidate will bring at least 3 years of experience following a master’s degree, demonstrating expertise in financial analysis, strategic planning, and industry-specific financial modeling.

Key Responsibilities:

• Financial Analysis & Reporting: Conduct in-depth financial analysis to support decision-making in drilling and logging tool manufacturing, field service, and repair & maintenance business units.
  Develop and maintain financial models, budgets, and forecasts tailored to these operational areas.
  Monitor key financial performance indicators (KPIs) relevant to the manufacturing, servicing, and maintenance of drilling and logging tools.
  
• Strategic Support: Evaluate operational data to identify cost-saving opportunities, efficiency improvements, and financial risks.Support capital allocation decisions by preparing investment analyses and financial justifications.
  
• Cost Management: Analyze cost structures in tool manufacturing processes and field service operations to drive margin improvements.
  
• Operational Insights: Assess revenue streams from field services, repairs, and maintenance contracts to identify growth opportunities.
  
• Compliance & Governance: Ensure financial activities adhere to industry regulations and internal policies. Provide audit support and maintain accurate financial documentation.
  

Qualifications:

• Minimum 3 years of financial analyst experience with a master’s degree in Finance and Business Administration, with a proven track record in the oil and gas industry.
• Hands-on experience in financial analysis for drilling and logging tool manufacturing, field service, and repair & maintenance operations.
• Strong understanding of technology, cost structures, revenue models, and operational workflows in these specialized areas.
• Excellent communication and presentation skills, with the ability to convey financial insights to non-financial stakeholders.