Lab Officer/ Research Engineer

Job Description:

Be part of an exciting FAB Operations Team working on cutting-edge advanced packaging process technologies.
This position is based in Singapore.

Responsibilities:

• Operate multiple type of semiconductor equipment in cleanroom environment.
• Ability to use computer-based programs and applications to perform daily work/duties.
• Operate equipment based on the required process specifications (e.g. procedures, change notifications, etc.).
• Participate actively and be responsible in assigned on-the-job assignments and other required trainings when requested.
• Provide machine operations coverage and backup supports when necessary.
• Adequate understanding of the Equipment in-charge, monitor performance, timely communication with Engineers-in-charge to perform equipment errors recovery promptly when necessary.
• Demonstrate excellent teamwork to promptly execute process sequences and data collections if required.
• Always follow safety protocols & rules in the Clean Room.
• Ensure 6S in the work environment and promptly report hazards/ suspicious/ abnormal activities or personnel if any identified.
• Address potential areas for improvements such as wafers processing cycle time, Equipment utilization, Safety/ Compliances, and cost savings.

Experience:

• Diploma in MicroElectronics/Electrical/Mechanical/Chemical Engineering.
• Basic understanding on semiconductor process is preferred.
• 1-3 years of experience in semiconductor processes (Diffusion, Wet Clean, CMP, ECP, Litho, Etch, CVD, PVD, etc.) will be added advantages.
• Must be a self-starter, dependable and highly motivated

Responsibilities:
1. The candidate will be required to perform on-wafer device testing, test data analysis & perform test measurement automation
2. The candidate should have hands-on experience in using an oscilloscope, power supply, analyzer, probe station, and related test tools and data presentation
3. The candidate should know basic programming to instrumentation control using LabView, MATLAB, and other software such as Visual Basic, Python, C++, etc. as a plus
4. The candidate is required to have basic knowledge of semiconductor devices
5. Understanding the device"s electrical parameters such as current-voltage characteristics, resistance, capacitance, inductance, etc. will be an advantage

Qualifications:
1. ITE/Diploma with relevant sutdy (Electrical, Electronics, Computer Engineering, Physics, etc.) can be considered
2. Fresh graduate or 2-3 years experience in electrical instrument handling and system automation
3. Highly motivated to succeed, a self-starter who is driven and able to work with others effectively to get things done
4. Semiconductor industry experience is a plus

Lab Officer/ Research Engineer

Job Description:

Be part of an exciting FAB Operations Team working on cutting-edge advanced packaging process technologies.
This position is based in Singapore.

Responsibilities:

• Operate multiple type of semiconductor equipment in cleanroom environment.
• Ability to use computer-based programs and applications to perform daily work/duties.
• Operate equipment based on the required process specifications (e.g. procedures, change notifications, etc.).
• Participate actively and be responsible in assigned on-the-job assignments and other required trainings when requested.
• Provide machine operations coverage and backup supports when necessary.
• Adequate understanding of the Equipment in-charge, monitor performance, timely communication with Engineers-in-charge to perform equipment errors recovery promptly when necessary.
• Demonstrate excellent teamwork to promptly execute process sequences and data collections if required.
• Always follow safety protocols & rules in the Clean Room.
• Ensure 6S in the work environment and promptly report hazards/ suspicious/ abnormal activities or personnel if any identified.
• Address potential areas for improvements such as wafers processing cycle time, Equipment utilization, Safety/ Compliances, and cost savings.

Experience:

• Diploma in MicroElectronics/Electrical/Mechanical/Chemical Engineering.
• Basic understanding on semiconductor process is preferred.
• 1-3 years of experience in semiconductor processes (Diffusion, Wet Clean, CMP, ECP, Litho, Etch, CVD, PVD, etc.) will be added advantages.
• Must be a self-starter, dependable and highly motivated

The potential candidate will be a key contributor to our AWS Cloud migration project, responsible for designing, developing, and optimizing applications for the cloud environment. The potential candidate should be an expert in application development and AWS Cloud services which is crucial in ensuring the success of our transformative project

• Design and develop robust and scalable applications using modern development languages and frameworks.

• Collaborate with cross-functional teams to migrate existing applications to the AWS Cloud platform.

• Optimize applications for cloud-native architecture and leverage AWS services for enhanced functionality.

• Identify and address performance bottlenecks in applications, ensuring optimal performance in the cloud environment.

• Conduct regular code reviews to ensure adherence to coding standards and best practices.

• Degree in Computer Science, Computer Engineering or equivalent.

• At least 8 years of experience in Java development (Java, J2EE, EJB, Spring Framework, etc.,)

• Experience in WebLogic, WebSphere Application Server and Apache Web server

• Proficient in using and understand Oracle and MS SQL Databases

• Proficient in AWS Cloud services, including Lambda, EC2, S3, and RDS.

• Well verses with Agile development preferably using SCRUM framework

• Experience in Liferay development (advantage)

Responsibilities:
1. The candidate will be required to perform on-wafer device testing, test data analysis & perform test measurement automation
2. The candidate should have hands-on experience in using an oscilloscope, power supply, analyzer, probe station, and related test tools and data presentation
3. The candidate should know basic programming to instrumentation control using LabView, MATLAB, and other software such as Visual Basic, Python, C++, etc. as a plus
4. The candidate is required to have basic knowledge of semiconductor devices
5. Understanding the device"s electrical parameters such as current-voltage characteristics, resistance, capacitance, inductance, etc. will be an advantage

Qualifications:
1. ITE/Diploma with relevant sutdy (Electrical, Electronics, Computer Engineering, Physics, etc.) can be considered
2. 2-3 years experience in electrical instrument handling and system automation
3. Highly motivated to succeed, a self-starter who is driven and able to work with others effectively to get things done
4. Semiconductor industry experience is a plus

Responsibilities

• Work with fellow engineers, product managers, and business owners in the team to ensure requirements are sound and are met
• Engage with our clients to provide support in integrating with our smart contracts
• Engage world-class smart contract auditors to ensure the security and correctness of our smart contracts
• Write, test, audit our smart contracts thoroughly to ensure their correctness
• Research and integrate our core system with various new blockchains as well as stablecoin
• Acquiring data from blockchains and other secondary data sources and maintaining databases for core services, such as transaction monitoring and/or warm wallet service providers
• Keeping pace with the developments of digital assets in the region

What we are looking for in you / Ideal profile

• 3+ years of relevant blockchain engineering experience
• 3+ years of digital payment engineering experience
• Interested in building a bridge for people to access decentralized networks and digital assets
• Working level of English language
• Knowledge of iterative, sprint-based product development style
• Knowledge of Git and GitHub
• Knowledge of distributed systems
• Knowledge of blockchain technology and cryptography

Nice to haves

• have heard about purpose-bound money (PBM)
• Experience in maintaining open-source projects and ensuring products integrations with different blockchain
• Experience in maintaining blockchain nodes and able to work with protocols such as Ethereum, Solana, or other none EVM-compatible protocols.
• Experience in building and maintaining middlewares to bridge between traditional servers and blockchains
• Experience in Golang or Javascript
• Experience with at least one major smart contract programming language such as Solidity
• Experience in bringing up the asynchronous system.
• Knowledge of RESTful APIs
• Knowledge of SQL, database design, and tuning of database performance
• Knowledge of queue systems

Main Responsibilities / Critical tasks

• Responsible to assist in the design of controls system and programming coding to meet the budget and time expectations as defined by Project Manager
• Able to Modify controls design and other documents according to the Mikron Processes & Standards and compliance to industry standards as according to customer URS.
• Develop specific program per customer and project requirements based on Mikron Coding Standard.
• Participate in controls and validation activities, conduct test and debug, internal buy-off, FAT and SAT.
• Work together with the Customer, Project Manager, Assistant Project Manager, Process Manager, Design Engineers and other project team members as required.
• Communication with Customer as per project requirements.
• Collaborate with suppliers as needed.
• Update PCT and task completion accordingly

Skills and knowledge requirements:

• Education: Bachelor’s degree/diploma in engineering or equivalent; or at least 5 years related experience and/or training; or equivalent combination of education and experience.
• Minimum 3 years of related work experience.
• Must be able to travel as requested
• Ability to make sound decisions, work independently and within a team structure
• Ability to function in a fast-paced work environment
• Well organized and respectful of project deadlines
• Ability to communicate in an open, clear, precise and effective manner with customers, peers and all levels of management
• Knowledge in Allen Bradley and Siemens-S7 programming.
• Computer skills including intermediate to advanced Microsoft Office Tools (Outlook, Word, PowerPoint) and Excel spreadsheet experience; Microsoft Project; Design software; Internet software; Manufacturing software and SQL/Dbase Database software.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

About The Role

This is a 1-year contract role.

• Supervise the installation of Gas Turbines on the main deck of the off shore platform under construction at Admiralty yard.
• Ensure project requirements are met during installation of other Rotating equipment on the platform.
• Participate in generating installation checklists and procedures for start up and commissioning of the gas turbines and other rotating equipment.

Role Requirements

• Bachelor degree in Mechanical engineering with 6-8 years of experience in oil and gas or chemical manufacturing industry.
• Experience in rotating equipment installation, commissioning and monitoring is preferred.
• Candidate must understand all terms related to Rotating equipment like Gas and steam turbines, compressors and pumps; must be able to read process flow diagrams, piping and instruments diagrams and provide guidance to the contractors.

Skills and Competencies Required

• Technical - Theory, working and operation of rotating equipment; general arrangement and cross sectional drawings, identification of parts; understanding of gas turbine operation and testing, centrifugal and reciprocating pumps, fin coolers; root cause analysis of rotating equipment failures; vibration analysis of rotating equipment; able to interpret the API and international standards.
• Generic - clear communicator, willing to put long hours, team person with a focus on job completion; problem solving; able to understand material and requisition online systems

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Responsibilities:

• Liaise with sales team, geotechnical team and customers to collect project information
• Preparation of Tunnel Boring Machine (TBM) technical offers (Design Calculations, Datasheet, Scope of supply, Method Statement, and other Supporting Documents)
• Clarification of technical requirements and technical solutions with various subsidiaries
• Order and review technical drawings with Drafting Department
• Participate in development of technical databases
• Provide technical support to sales team and project teams

Job Requirements:

• Bachelor's Degree in Mechanical Engineering
• Some knowledge of TBM technology will be advantageous
• Ideal candidate should be a fast learner and industrious
• Possess good interpersonal and effective communication skill
• Excellent team play who can also work well independently with minimum supervision and results-oriented in a fast-paced environment
• Good written and spoken English, additional language will be an added advantage
• Good computer literacy skills with software like Microsoft and/or windows applications

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 2 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

About The Role

This is a 1-year contract role.

The Engineer's accountabilities during the Execute phase are focused on managing the performance of the EPCI (Engineering, Procurement, Construction & Installation) contractor under the EPCI CONTRACT while ensuring project requirements are met.

Accountabilities will include, but not be limited to:

• Monitoring Contractors compliance with the EPCI Contract for areas of responsibility.

• Administering Contract and Managing Contractors compliance with the Hook-up and Comissioning Subcontract.

• Installation and Commissioning of Mechanical Equipment Packages

• Sailaway and Offshore HUC Readiness execution planning.

• Risk Management

• Management of Change

• Brownfield Scope and execution Planning

• Package / Area Procurement Management for a portfolio of Vendor Equipment Packages.

• Resolution of Technical Queries

• Assuring Contractors vendor packages meet Not Normally Manned Quality and Reliability Specification Requirements.

• Critical Path management for assigned packages

• Development of Owners Team Procedures and Workflows

• Audit of Contractor Plans, Procedures and Workflows

• Building the desired HSSE culture in the owner and contractor teams to achieve Goal Zero. Shaping a culture of safe behaviours and practices throughout the project phases

• Building an effective Not Normally Manned Quality Culture in the owner and contractor teams to achieve Right-First-Time delivery.

• Quality for Assigned Packages; Vendor Inspections/Factory Acceptance Testing.

• Quality Resolution of Multidiscipline NCRs/Audits

• Interface Management (Both Topsides to other scopes and intra-topsides within packages)

• Technical Integrity Verification and demonstration

• Fabrication Site Project Engineering and Contract Administration

• Site investigations and resolution of site-based issues.

• Site Query management.

• Team Building/Team Effectiveness Initiatives

• Continuous Improvement Initiatives

• Capture project lessons learnt for the benefit of future projects.

• Assisting the Owners Team resolve issues that are multi-discipline in nature.

Job Requirements

• Bachelors degree in Mechanical Engineering
• Minimum 3 years relevant experience

Skills and Competencies Required

• Strong integrative leadership and communication skills; collaboration skills working with the multiple contractors (and sub-contractors).
• Exceptional communication skills, both written and verbal, in English.
• Exceptional skills in developing and implementing plans, procedures, workflows.
• Excellent collaboration and team working skills.
• Excellent stakeholder management and influencing skills.
• Mature behaviours appropriate and conducive to managing an EPCI Contractor in a lump sum environment.
• Willingness to work in both office and construction yard.

• Able to develop, plan and coordination of all M&E works
• Assis in implementation and review of plans specification
• Monitor Project status and submit progressive report to Project Manager
• Provide solutions for M&E technical issues
• Ensure control of engineering & technical documentation
• Ensure control of product delivery and corrective action implementation, construction machines are properly maintained and all testing/measuring/test equipment are calibrated and controlled
• Plan, orgnize the review and evaluate the work of consultants, contractors, and others.
• Able to perform value engineering
• Complicance with all necessary standards, code of practice and safety regulations

Requirements:

• Diploma/Degree/Bachelor Degree
• Minimum 3 years of relevant experience in construction work
• Able to work shift
• Able to works on Sunday(if necessary)
• 24 Hours on call

1.Role Purpose

Mechanical Superintendent reports to the Construction Manager and is responsible for coordinating with yard construction team, resolving any field-related issues, and ensuring that all mechanical work is executed efficiently and in compliance with project specifications and industry regulations. This includes ensuring the adherence to project schedules, overseeing engineering processes, managing material control, and maintaining quality and safety standards.

2. Duties & Responsibilities

1) Project Oversight and Management:

• Oversee all mechanical construction activities on-site, ensuring adherence to project plans and schedules.
• Coordinate with project manager, engineers, and other department Superintendents to ensure seamless project execution.

2) Scheduling and Planning:

• Develop and maintain detailed project schedules for mechanical construction activities.
• Ensure timely completion of tasks in alignment with the project timeline.

3) Technical Supervision:

• Provide technical guidance and support to the construction team.
• Review and approve engineering documents, specifications, and plans.

4) Material Control:

• Manage the procurement, storage, and allocation of materials required for mechanical construction.
• Ensure material quality and availability to prevent project delays.

5) Quality Assurance and Control:

• Implement and enforce quality control procedures to ensure all work meets project specifications and industry standards.
• Conduct regular inspections and audits to identify and rectify any quality issues.

6) Safety Management:

• Promote a culture of safety on-site, ensuring all activities comply with safety regulations and standards.
• Conduct safety briefings and training sessions for the construction team.

7) Issue Resolution:

• Identify and resolve any technical or logistical issues that arise during construction.
• Collaborate with relevant parties to address and mitigate project risks.

8) Team Leadership:

• Lead and mentor the mechanical construction team, fostering a collaborative and productive work environment.
• Evaluate team performance and provide feedback for continuous improvement.

3. JOB REQUIREMENTS

• The degree of Bachelor of Mechanical Engineering.
• At least 10 years of experience in mechanical construction in Process, Chemical, Power Plant Projects.
• Proven track record of managing large-scale construction projects, particularly in high-pressure environments.
• Extensive knowledge of mechanical systems, equipment, and construction practices in the Oil and Gas sector.
• Strong leadership abilities with experience in supervising and managing construction teams.
• Strong analytical and problem-solving skills and mitigate risks effectively.
• Knowledge of safety regulations and quality control processes specific to the Oil and Gas industry.
• Proficiency in project management software and tools (e.g., Primavera, MS Project, Navisworks).

Design Engineer - Manufacturing Industry

Salary: $4000 max

5 days work week

8.30am - 5pm

Location: Serangoon North

Job Scope:

• To develop, document and support the build of high precision plastic injection tooling and molded parts for manufacturing.

• Support Program team during upfront new project quotation stage by providing accurate upfront tooling/product DFM that matches the right quality requirements.

• To meet customer for DFM and mold concept review to ensure customer’s technical requirements and concerns are addressed.

• Support Tooling Department by conducting internal tooling design and DFM reviews before tool launch.

• Support Production in areas like molding process optimization, implement manufacturing fixtures and automation for reliability and efficiency improvements.

• Support Quality Team in the design and fabrication of test/measurement fixtures.

• To coordinate mold trials, tooling and molded part troubleshooting and carry out necessary engineering changes to ensure parts can be produced smoothly with the required quality.

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc.
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical installation, testing and commissioning.

JOB REQUIREMENT

• Degree in Electrical & Electronic engineering.
• Familiarity with AutoCAD, Navisworks.
• Minimum 3 years work experience in process plants or in the water/wasterwater industry, with good knowledge in electrical design of water and/or wasterwater treatment plants.

The Third Engineer is responsible for assisting in the maintenance and operation of the engine room and machinery on board the vessel. This role involves supporting the Chief and Second Engineers in ensuring the efficient and safe operation of the ship’s mechanical systems, engines, and auxiliary equipment.

Job Description:

• Assist in the operation and maintenance of main engines, auxiliary engines, and associated machinery.
• Monitor and manage the engine room and machinery spaces, ensuring proper functioning and efficiency.
• Perform routine checks and inspections of machinery and equipment.
• Conduct scheduled and preventive maintenance on engines, pumps, compressors, and other mechanical equipment.
• Troubleshoot and repair machinery and equipment malfunctions under the guidance of senior engineers.
• Maintain records of maintenance and repairs performed on equipment.
• Stand engine room watch as assigned, monitoring machinery operation, fuel consumption, and other operational parameters.
• Ensure that engine room safety procedures and protocols are followed at all times.
• Adhere to safety regulations and procedures, including wearing appropriate personal protective equipment (PPE).
• Participate in safety drills and emergency response activities as required.
• Ensure compliance with environmental regulations and shipboard policies.
• Maintain accurate records of engine room operations, maintenance activities, and fuel consumption.
• Report any irregularities, malfunctions, or safety concerns to the Chief Engineer or Second Engineer.
• Engage in ongoing training and professional development to stay updated on engineering practices, safety protocols, and maritime regulations.
• Assist in the training and mentoring of junior engine room staff and cadets.

Requirements:

• Diploma or degree in Marine Engineering, Mechanical Engineering, or a related field.
• Prior experience in engine room operations on ships or similar marine environments is preferred.
• Valid STCW (Standards of Training, Certification, and Watchkeeping) certifications, including Basic Safety Training and Engine Room Watchkeeping.
• Proficiency in mechanical systems, engine operations, and troubleshooting. Strong understanding of safety procedures and regulatory compliance.

Program Engineer - Manufacturing Industry

Salary: $4000 max

5 days work week

8.30am - 5pm

Location: Serangoon North

Job Scope:

Lead and co-lead with the Program Manager in New Product Introduction (NPI) project, making sure it satisfies all requirements and specifications before moving it into mass production.

Design project plan, execute and ensure that every task is completed on schedule and within the allocated budget.

Study 3D product design and 2D drawing and collaborate internally with tool designer and engineering on design for manufacturing (DFM).

Participate in tool trial, part evaluation, problem analysis and solving, as well as documentation preparation and issuance.

Collaborate with internal project team members and customers on scheduling and technical issues, to achieve desired outcomes.

QA Engineer - Manufacturing Industry

Salary: $3500 max

5 days work week

8.30am - 5pm

Location: Serangoon North

Job Scope:

- Maintain updated and accurate documents and records on ISO 9001, 14001 and 13485 system (includes Quality Manual, Procedures, Work Instructions, Forms, etc.) to ensure system compliance and ready for Management Review.

- Plan and conduct internal and external audits to ensure readiness of all sections for third party certification body, management review and customer audits.

- Coordinate with internal stakeholders to participate in customer or supplier audits for compliance

- Review audit findings and develop action plans to drive continuous improvements.

- Generate and review quality reports on suppliers’ performance and work with suppliers to address non-conforming materials, and drive for continuous improvement.

- Issue and follow up on Supplier Corrective Action Request (SCAR) to suppliers, monitor and review SCAR effectiveness for timely closure.

- Support the qualification of new suppliers to maintain a healthy pipeline of qualified suppliers to meet Cyrus production requirements.

- Maintain and conduct regular review of calibration and preventive maintenance for equipment.

- Responsible for quality issues arising from production and customer feedback, and collaborate with the production team to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation.

- Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance.

- Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness.

- Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements.

Job Summary:

The Procurement Engineer is responsible for sourcing, purchasing, and managing the supply of materials, equipment, and services needed for engineering and technical projects. This role involves working closely with suppliers, internal teams, and project teams, to ensure that procurement activities align with project timelines, budget, and quality standards.

• Supplier Management: Identify, evaluate, and maintain relationships with suppliers to ensure quality and reliability.
• Procurement Process: Develop strategies, issue purchase orders, and monitor deliveries to meet project requirements.
• Technical Collaboration: Work with engineering teams to align procurement with technical needs and resolve issues.
• Cost & Quality Management: Negotiate prices, analyze market trends, and ensure materials meet quality standards.
• Compliance & Documentation: Maintain accurate records, prepare reports, and ensure all activities comply with regulations and company policies.
• Risk Management: Manage risks related to suppliers, market changes, and project timelines.

Education: Diploma/ Degree in Engineering, Supply Chain Management, or a related field.

Experience: 3-5 years of experience in procurement, in an engineering or technical environment.

Skills:

• Strong understanding of engineering principles and technical specifications.
• Proficiency in procurement software and ERP systems.
• Excellent negotiation, communication, and analytical skills.
• Ability to manage multiple projects and work effectively under pressure.

Preferred Qualifications:

• Certification in Procurement or Supply Chain Management (e.g., CPSM, CSCP).
• Experience with international sourcing and supplier management.
• Familiarity with Lean, Six Sigma, or other continuous improvement methodologies.

Work Environment:

• Primarily office-based with occasional travel to supplier sites and project locations.
• Ability to work in a fast-paced environment and manage multiple priorities.

The Procurement Engineer is responsible for sourcing, purchasing, and managing the supply of materials, equipment, and services needed for engineering and technical projects. This role involves working closely with suppliers, internal teams, and project teams, to ensure that procurement activities align with project timelines, budget, and quality standards.

• Supplier Management: Identify, evaluate, and maintain relationships with suppliers to ensure quality and reliability.
• Procurement Process: Develop strategies, issue purchase orders, and monitor deliveries to meet project requirements.
• Technical Collaboration: Work with engineering teams to align procurement with technical needs and resolve issues.
• Cost & Quality Management: Negotiate prices, analyze market trends, and ensure materials meet quality standards.
• Compliance & Documentation: Maintain accurate records, prepare reports, and ensure all activities comply with regulations and company policies.
• Risk Management: Manage risks related to suppliers, market changes, and project timelines.

Education: Diploma/ Degree in Engineering, Supply Chain Management, or a related field.

Experience: 3-5 years of experience in procurement, in an engineering or technical environment.

Skills:

• Strong understanding of engineering principles and technical specifications.
• Proficiency in procurement software and ERP systems.
• Excellent negotiation, communication, and analytical skills.
• Ability to manage multiple projects and work effectively under pressure.

Preferred Qualifications:

• Certification in Procurement or Supply Chain Management (e.g., CPSM, CSCP).
• Experience with international sourcing and supplier management.
• Familiarity with Lean, Six Sigma, or other continuous improvement methodologies.

Work Environment:

• Primarily office-based with occasional travel to supplier sites and project locations.
• Ability to work in a fast-paced environment and manage multiple priorities.

PC Refresh Engineer

We are looking for experienced full-time PC refresh engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 1-2 years of IT deskside support experiences.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]