Job Description & Requirements

1. Support in inspection with CMM, i-Vision.

- FA Inspection

- First piece set up inspection

- Routine inspection (in-coming, in-process, out-going)

2. Fixture inspection (New fixture) to ensure acceptable usage.

- Inspection fixture

3. Support in CAPA/Root Cause Analysis for both internal and external quality issue.

- Data collection

- Data analysis

- Root Cause identification

- Solution establishment

4. Generate internal and supplier quality performance report.

- Monitoring of internal production quality issue

- Monitoring of sub-con/supplier quality issue

- Review, analyse and evaluate data on the above quality issue

5. Lead MRB review and disposition.

- Perform review on the rejection, evaluate and disposition of rework, scrap or UAI

6. Participate in supplier evaluation and qualification.

- General supplier management

- Supplier audit (new and existing supplier)

7. Support in audit (internal and supplier).

- Perform auditor role during internal audit

- Auditing of major supplier with high quality issue

8. Lead in internal calibration management.

- Keep track on the calibration due date and take initiative to recall for calibration

- Maintain internal IMTE to date

9. Support on Documentation Control.

- Inspection report

- Material Certificate

- Treatment COC

- Internal inspection record

- Perform GDP

10. Oversee quality activities and action plan.

- Arrangement of inspection priority

- Updating of inspection status

- Liaise with cross function on quality issue

- Problem solving through team work

11. Support QM to lead the Quality Department.

- Perform as a lead of Quality Department

- Take over the HOD role in the absent of QM

Further scope will be added as per necessary prior to changes of needs with reference of current capabilities, knowledge, skill and performance.

12. AS9100, ISO14001 capability.

- Understand all clauses of international standard.

- Execution of these international standard.

- Maintenance of organisation QMSJob Description & Requirements

13. Able to be outstation in Southeast Asia if required

Design /drafting of various Electrical layouts and schematics using solid work electrical software as directed by PD/AE and/or as per the requirement of the assigned job.

· 3D modeling of electrical components, equipment and other related items as per the requirement of project.

· Provide the technical support to site Engineer.

· Creating Draft of Electrical Single Line / Panel Diagram according to customer technical specification.

· Maintain, update and rectify drawings as needed and ensure its accuracy and completeness.

· Respond promptly to inquiries and requests relating to the drawings.

· Helps PD/AE in resolving interferences/clash reports.

Requirements:

· Diploma in Electrical Engineering or equivalent.

· Good working knowledge of mechanical/electrical aspect of generator system and control panels.

· Experience in internal/ Client model review.

· Working experience of drawing software like solidworks electrical and draftsight.

· Able to read and understand site layout drawings and general arrangement drawing of genset.

· Fresh graduates are welcome to apply.

** 0830am -1800pm

** 5-day work weekly

** Two ways of shuttle bus service provided at Jurong East MRT

Only for PR and Singaporean.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR department. We regret that only suitable candidate will be notified.

Role:Network Engineer

JD:

Responsibilities:

Design and Document Preparation
• Provide networking expertise, revise solution architecture drawings and diagrams
• Prepare the design documents including Low Level Design (LLD) documents for OPS Network and SMRC Network, firewalls configuration, IDS/IPS and hardening states.
• Prepare ITD (Test procedure) document for OPS Network and SMRC Network
• Prepare new or update all the relevant documents (e.g. Maintenance or User Manual, Config/Rollback/Troubleshoot Procedure) required for the OPS Network (FMC, FTD (firewalls)) and SMRC Network (OFL+ONL)
Integration Support:
• The Contractor with support configuration changes to system platforms in factory and customer sites.
• The Contractor will work on the configurations of interfaces, zones, firewall policies, IPS, application filtering for single firewall (Offline)
• The Contractor will support the integration of Offline HSE and Offline Remote Site Switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/NMS/LMS, RADIUS, NTP, SIEM etc (Offline)
• The Contractor will support the integration of Online AMTS New HSE & Remote sites switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/LMS, RADIUS, NTP, SIEM etc. (Offline)
• The Contractor will assist in the SMRC network configuration, Integration, testing, verification and troubleshooting of the following technology used in SMRC Network (Online SMRC)
• The Contractor will work on the configuration, integration, testing, verification and troubleshooting of Online OPS Network selected firewalls / external interfaces (particularly from the Firewall application content inspection (Layer 4 through Layer 7)) (OPS Network)
• The Contractor will configure, optimize and test the transparent firewall failover functionality running in HA and standalone mode with online interfaces for the traffic impact (OPS Network)
• The Contractor will support External Support Platform (ESP) setup, including network platform configuration & Integration (Layer 2 and Layer 3) of switch, configure firewall with S2S VPN, DMZ, NAT and Internet using ACL policies, IPS policies, URL & Content filtering policies, VPN policies, NAT policies, hardening of switch and firewall as per the hardening guideline
• The Contractor to provide troubleshooting support during online deployment & integration (OPS Network)

Hardening Support:
• The Contractor will assist on the hardening of Online / Offline SMRC network equipment and firewalls
• The Contractor will assist on the hardening of Online / offline OPS firewalls (OPS Network).
• The Contractor will troubleshoot / fix if there are any operational / unknown issues occurs in the environment due to the hardening configuration on network devices (Offline, Online SMRC)
• The Contractor will support in case any issue with hardening of online firewalls / any operational issue occurs due to the hardening of online network devices (OPS Network).

Job Duties:

• Maintain 5S & Safety in Laboratory, plan and deliver services to meet the local and regional business plan objectives
• Technical report preparation and authorization and provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Provide onsite project leadership and testing execution while ensuring development and training of junior staff
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing, possess the ability to oversee standard and/or routine technical problem solving activities and able to interact with customers on technical issues and questions
• Provide Input and support on business development opportunities with new or existing customers and be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory
• Carry out crucial examination and implementation of testing concepts and data, utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions
• Ensure that tests assigned to the technicians are performed in a timely manner in accordance with validated test protocols and procedures; give training to the technicians as required, upkeep test reports and related records and ensure equipment and testing meets the requirement of ISO/IEC 17025
• Maintain and upkeep test facilities and laboratory equipment, assist with hazard identification and risk assessment exercises within their areas of responsibility and monitor day-to-day health and safety in their section of responsibility and ensure all hazards, near misses and accidents are reported

Job Requirements:

• Working knowledge of laboratory safety
• Possess a Degree in Civil Engineering or Materials Engineering major or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic / professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Calibration Engineer to join our rapidly expanding team.In this role, you will manage the equipment calibration within Element Singapore and Malaysia business units. Direct responsibility to Principal Quality Manager with functional responsibility to General Manager. The position will require the candidate to be eligible for permanent employment in Singapore. The Calibration Engineer is responsible for calibrating equipment and maintenance of records throughout the Element Singapore and Malaysia business units.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

1. Calibration of Equipment: (a) Perform regular calibration of testing and measurement, equipment to ensure accuracy and compliance with standards. (b) Verify and adjust instruments to meet technical specifications and industry guidelines.
2. Documentation and Reporting: (a) Maintain detailed calibration records, including test results, adjustments made, and equipment performance trends. (b) Generate calibration certificates and reports as required.
3. Compliance and Standards: (a) Ensure all equipment adheres to international, national, and organisational calibration standards (e.g., ISO/IEC 17025). (b) Support audits by providing necessary calibration documentation and demonstrating compliance.
4. Equipment Maintenance: (a) Monitor the performance of equipment to identify potential calibration or maintenance needs. (b) Conduct preventive maintenance and troubleshoot issues to minimise downtime.
5. Procedure Development: (a) Develop, review, and refine calibration procedures for various equipment types. (b) Standardise processes to improve efficiency and reliability.
6. Collaboration with Teams: (a) Work closely with the Quality team and Operational teams to address calibration needs. (b) Provide technical support and guidance to resolve instrument-related issues.
7. Training and Knowledge Sharing: (a) Train team members on proper calibration techniques and the importance of maintaining equipment accuracy. (b) Stay updated on new calibration methods, tools, and industry advancements.
8. Risk Management: (a) Identify risks associated with uncalibrated or faulty equipment and implement strategies to mitigate them. (b) Perform root cause analysis for calibration failures or discrepancies.
9. Inventory Management: (a) Maintain an inventory of calibrated tools, instruments, and reference standards. (b) Schedule periodic calibration and ensure timely replacement of outdated or damaged equipment.
10. Data Analysis and Trend Monitoring: (a) Analyse calibration data to identify trends, deviations, or potential areas of improvement. (b) Recommend corrective actions to improve equipment reliability and accuracy.
11. Regulatory Support: (a) Assist in external and internal audits by providing accurate calibration records and ensuring compliance with regulatory requirements.
12. Innovation and Process Improvement: (a) Propose and implement enhancements in calibration methods, technologies, and practices to increase efficiency and accuracy

Job Requirements:

• Minimum Bachelor Degree in in Materials Science or Materials Engineering
• Experience of working in an ISO / IEC 17025 calibration environment is a prerequisite.
• Effective organizational and time management skills with the ability prioritize activities.
• Ability to collaborate with colleagues and work effectively as part of a team.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

About your role

• Lead the design and development of cutting-edge 3D machine vision systems tailored for industrial robotic use cases, ensuring high precision and performance.
• Collaborate closely with cross-functional teams, including robotics engineers and software developers, to integrate 3D machine vision technology seamlessly into robotic applications.
• Oversee the integration of 3D sensors with robotic systems, optimizing their performance and accuracy.
• Develop and refine algorithms for data acquisition, image processing, and object recognition to enable advanced visual perception capabilities for robotic systems.
• Troubleshoot and debug technical challenges related to machine vision technology, ensuring robust and reliable operation within industrial environments.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• Significant experience in the design and development of 3D machine vision systems, particularly in industrial or robotic applications.
• Proficiency in programming languages such as Python, C++, and experience with relevant libraries and frameworks.
• Strong knowledge of 3D sensors, as well as processing and manipulation of point cloud and mesh.
• Problem-solving skills and the ability to work collaboratively in a multidisciplinary team environment.
• Excellent communication skills to effectively convey technical concepts and insights to both technical and non-technical stakeholders.

Responsibilities

• Assist project manager to manage projects from initiation through completion, ensuring timely delivery within budget
• Coordinate with internal team and external stakeholders to ensure seamless project execution
• Oversee the design, implementation, and integration of control systems, SCADA systems, and Programmable Logic Controllers (PLCs) to meet client requirements
• Prepare and review project documentation, including project plans, specifications, technical drawings, and operation manuals
• Conduct site surveys, Factory Acceptance Test (FAT), Site Acceptance Test (SAT), and commissioning activities at client sites
• Troubleshoot and resolve issues related to system performance, hardware and software integration
• Ensure adherence to safety, quality, and regulatory standards in all projects activities
• Provide technical support and training to clients and end-users during the implementation and handover phases
• Liaise with suppliers and subcontractors to ensure delivery of materials and services on time
• Assist in preparing technical proposals and cost estimates for new projects

Requirements

• Diploma or Degree in Electrical Engineering, Control Systems Engineering or related fields
• 2-5 years of experience in project management, automation, and control systems, preferably in industries such as water treatment, oil & gas, manufacturing, or infrastructure
• Strong knowledge of SCADA, DCS PLC programming
• Familiar with communication protocols like Modbus, DNP3, and OPC
• Hands-on experience with field commissioning, testing, and troubleshooting
• Strong project management skills, including plannings, scheduling, budgeting and resource management
• Excellent communication and interpersonal skills to manage client relationship and work in a team-oriented environment
• Professional Certificate holders in PMP or Certified Automation Professional is a plus

Job Scope

- 40% Provide Technical and Desktop support for end-user environment.

- 60% assist Senior Engineer to Plan; design the Technology schematic and

create bill of materials.

- Pro-actively provide recommendation to Senior staff of any customers’ requirement for

technology improvement,

- Timely report to Senior the progress of all assigned projects.

- Take responsibility for the assigned project and shall have full accountability and visibility of

the entire installation process, field deployment and implementation till Project.

completion.

- Promptly update Project schedule and cost sheet.

Skills Preferred:

Technically competent in Windows operating systems, Endpoint Security, basic networking configuration.

Knowledge of Helpdesk systems.

Good communication skills.

Comfortable in managing end-users and explaining situations that may arise.

Able to perform simple planning of delivery and customer liason.

NETWORK ENGINEER

Mandatory Skills Cisco Router

Preferred Skills Cisco Catalyst Switch, Alcatel-Lucent FortiNet Series, Palo Alto Networks Firewall, Fortinet

Job Title: Network Security Engineer

Job Overview:

We are in search of a highly skilled AI-OPS / Network Security Engineer to manage and enhance our network infrastructure's security. The successful candidate will be responsible for the design, implementation, and maintenance of network security solutions, ensuring the stability, reliability, and security of our network environment.

Key Responsibilities:

1. Experience in AIOPs solutions for network monitoring, analytic and automation
2. Maintaining AI-Driven tools with existing network infrastructure for predictive analytics, anomaly detection, and root cause analysis
3. Basic knowledge in automating network tasks and workflows using AIOPs tools and low to no code programming
4. Analyze network data to identify trends, optimize performance, and improve security
5. Configure, and manage Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS) to maintain a secure and efficient network infrastructure.
6. Implement and maintain Palo Alto and Fortinet Fortigate Firewalls for network security and access control.
7. Administer Alcatel Lucent Wireless Controllers to ensure a secure and robust wireless network environment.
8. Utilize SolarWinds NPM (Network Performance Monitor) and NCM (Network Configuration Manager) for network monitoring and configuration management.
9. Manage and maintain ClearPass Policy Manager for network access control and policy enforcement.

Qualifications:

- Bachelor’s degree in Computer Science, Information Technology, or related field.

- 3+ years of experience in network security engineering.

- Proficiency in Cisco Catalyst Switches (IOS), Cisco Nexus Switches (NXOS), and Alcatel Lucent Switches (AOS).

- Experience in configuring and managing Palo Alto and Fortinet Fortigate Firewalls.

- Hands-on experience with Alcatel Lucent Wireless Controllers.

- Familiarity with SolarWinds NPM / NCM for network monitoring and configuration management.

- Proficient in ClearPass Policy Manager for network access control and policy enforcement.

- Knowledge of network protocols, security architectures, and best practices.

- Strong analytical and problem-solving skills with attention to detail.

- Excellent communication and teamwork abilities.

Additional Preferred Skills:

Though not mandatory, the ideal candidate will also have exposure to the following technologies:

- Experience with other firewall solutions beyond Palo Alto and Fortinet, such as Check Point or Cisco ASA.

- Proficiency in network encryption protocols and VPN technologies.

- Understanding of network segmentation and micro-segmentation principles.

- Knowledge of intrusion detection/prevention systems (IDS/IPS).

- This role demands a proactive individual with a strong technical background in network security. If you possess these skills and are looking for a challenging opportunity in network security engineering, we encourage you to apply and become a valuable part of our dedicated team.

Job Description

> Performing electrical engineering work in analysis, design, development, running simulations, prototyping hardware, evaluation, planning, testing and operations;

> working with the end customer and/or systems engineers to gather requirements and convert them to engineering specifications;

> trouble shooting and repair the system hardware and software during real-time collection operations.

> On site electrical research, construction audits, field reviews

> Writing detailed and concise technical reports, feasibility studies, proposals, including written responses and instructions as required during all project phases

> Conducting all tasks in cooperation with internal clients and other engineering disciplines

> Managing and enhancing client relationships

> Maintain proper project documentation of the electrical work performed Job

> Other assigned tasks as requested

Job Requirements

> Minimum Diploma/ Degree in Electrical Engineering/Electronics/Automation Control or equivalent

> Responsible and committed.

> Good problem solving and troubleshooting knowledge using systematic approach

> Knowledge of AutoCAD software or electrical equivalent will be an advantage

> Ability to design electrical circuit and perform electrical calculations

> Knowledge and experience on wiring will be an advantage

>Self-motivated, highly resourceful and organized

Job Responsibilities:

• Reporting to Senior Tunnel Manager
• Support the tunnelling operation from geological viewpoint.
• Provide geological supervision to the tunnelling operation.
• Provide planning of additional Soil Investigation related to tunnelling works.
• Conduct face mapping to understand the ground condition for tunnelling.
• Ensure the work is done in compliant with the protocol established for the project.

Job Requirements:

• Bachelor’s Degree/ Diploma in Civil Engineering or related field.
• Experience in tunneling is mandatory.
• Experience in Rail & LTA projects is mandatory.

Job Description

• Develop and submit method statements for EMS and related activities prior to tunneling.
• Monitor the EMS full-time during tunneling operations.
• Establish and implement primary and secondary muck reconciliation methods, such as muck pit measurement and belt weigher measurements, Fines calculation
• Prepare shift reports for EMS, including results of primary and secondary muck reconciliation for each ring built.
• Investigate breaches of upper and lower muck limits and document findings in shift reports.
• Monitor trend graphs of deviation flow, total volume, dry volume, dry mass etc.
• Coordinate with Tunnel Engineers, TBM operators, and STP operators to ensure smooth operation.
• Conduct regular inspections and calibrations of EMS equipment to ensure proper functioning and adherence to safety and quality standards.
• Analyze data trends and provide recommendations for optimizing tunneling efficiency and minimizing downtime.

Job Responsibilities

• Minimum 5 years of experience in tunneling works
• Diploma or bachelor's degree in Civil Engineering or related field.
• Good communication, proficient in both written and spoken English.

• MNC Company
• Basic $2000 - $3000 + Allowance + OT + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong Island (Transport Provided)
• 12 Hours Rotating Shift

Job Responsibilities:

• Perform minor maintenance
• Performing checks, start-up and shutdown operations on process equipment such as pumps and compressors
• Carry out filter changes
• Isolating piping systems for plant start-up, shutdowns, product grade change and troubleshooting operations
• Adjusting process parameters to optimize process operations under supervision of Supervisors
• Commissioning and decommissioning of process equipment
• Performing emergency shutdown of process equipment
• Proper handing and blending of non-conforming and off specs products
• Preparing plant equipment for maintenance
• Preparing chemicals, including mixing and dilution, for process operations
• Performing inter-tank transfers of chemicals and products based on established quality procedures
• Performing emergency response activities and drills
• Other ad-hoc duties as assigned

Job Requirements:

• Nitec / Diploma in Chemical Process / Mechanical Engineering / Electrical Engineering or equivalent
• Able to perform 12-hr rotating shift

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

THIEN CHING MEI (R2198032)

EA Recruitment Pte Ltd

EA License No: 21C0492

Major Duties & Responsibilities

• Responsible for the growth of the organization in Singapore

• Providing all Pre-sales and Post Sales Services such as Bidding, Commercial, Negotiation and laying out all technical requirements and potential deviations

• Liaising and working closely with the management in executing Business Planning & Strategy

• Managing daily sales enquiries and quotation for existing and new client via email and over the phone, onsite or online presentation

• Frequent sales visit to hospitals and nursing homes

• Assisting & covering Technical Service Team for checking and commissioning

Job Requirement

• Electrical / Mechanical know-how Required

• Proficiency in Microsoft Office

• Good communication skill

This position requires a combination of marketing and sales skills in order to serve the clients better and also to push the sales of the company. You will act as a representative for the company to the clients to understand the needs of the clients, cross-sell new products to existing clients, follow-up on sales orders, and also to support the sales team on the ground. The job will require you to make necessary phone calls and meetings to help the sales team to grow.

Job Description:

• Provide exceptional training, customer service, and technical support remotely and on-site to current and prospective customers, and participate in activities which include but are not limited to:
• Diagnose, troubleshoot, repair and maintain machineries & equipments at client’s premises.
• Identify and resolve client’s feedback both remotely and on client’s premises.
• Ensure that the end-users carry out work in compliance with with the SOP / Method of Statement, Building Control Act and Regulations, Codes of Practices and requirements of building authorities and government agencies.
• Observe and comply with site’s safety requirements, and submit all reports as directed and ensure that works are carried out in a safe and proper manner.

Additional Responsibilities:

• Simple Inventory management and handling

Education/Experience

• Candidate must possess at least Nitec in Mechanical and/or Electrical or related discipline in engineering
• Equivalent combination of education, training and experience of at least 3 year(s) of working experience in the construction related industries.

Skills and Special Requirements/Licensing

• Responsiveness and a “can-do” attitude
• Service oriented with excellent interpersonal, communication & presentation skills.
• Experience with mechanical and electrical repairs.
• Requires possession of a valid Class 3 driving license.
• Company vehicle will be provided
• Singaporeans only

Job description:

• Assist in the design, development, and testing of engineering projects under the supervision of a Senior Engineer.
• Conduct preliminary surveys and collect data for project planning.
• Prepare engineering plans, drawings, and specifications using CAD software.
• Perform regular inspections of equipment and ensure maintenance schedules are followed.
• Collaborate with other engineers and technicians to troubleshoot and solve technical issues.
• Monitor project progress and ensure adherence to safety standards and regulations.
• Maintain detailed reports and documentation related to projects.

Requirements:

• Diploma in Engineering (preferably in Precision Engineering).
• Strong analytical and problem-solving skills.
• Practical experience with CAD software.
• Ability to work collaboratively in a team environment.
• Good communication and organizational skills.

Why choose Logicalis?

As Architects of Change, Logicalis' focus is to design, support and execute clients' digital transformation by uniting their vision with their technology expertise and industry insights. The company, through its deep understanding of key IT industry drivers such as security, cloud, data management and IoT, can address customer priorities such as revenue growth and business, operational efficiency, innovation, risk and compliance, data governance and sustainability.

We strengthen our purpose: to design, support, and execute our customers' digital transformation by converging their vision with our technological expertise and knowledge of the industry. The brand refresh underpins both the evolution of Logicalis’ positioning as well as our strategic vision for growth.

Responsibilities:

• Implementing network and security solutions: Responsible for implementing network and security solutions for clients, which may involve configuring routers, switches, wireless, load balancers and other network devices like Aruba. Racking and Stacking network devices. Expected to handle small to mid-sized project.
• Troubleshooting network and security issues: Responsible for diagnosing and resolving network and security issues that arise for clients while deploying, which may involve investigating connectivity problems, configuration issues, and analyzing network traffic.
• Client management: Responsible for building and maintaining relationships with clients, managing their expectations, and ensuring their needs are met.
• Collaboration with other teams: Working closely with other teams such as project managers and Operations team to ensure the network and security delivery is completed within the stipulated time.
• Technical Documentation: Responsible for creating technical documentation such as Low-Level Design, TDS, As-built, UAT and SAT documents. Signoff all the documents from clients for the project closure.
• Knowledge Transfer: Responsible for providing handover the project to client and internal operations team.

Requirements:

• Possess at least a Diploma, Bachelor's Degree, or Professional Degree in Computer Science/Information Technology or equivalent
• Minimum 1-5 years of experience in network design/deployment.
• Excellent knowledge in Routing and switching, eg. BGP, OSPF, Multicast, VSS, spanning tree, MPLS L3VPN.
• Experience in wireless. Cisco WLC, Aruba, Prime, MSE/CMX, DNAC, Ekahau Site Survey tool
• Data centre technologies, eg. Cisco Nexus VDC, VPC, FEX, VXLAN, ACI.
• Good knowledge of Firewall technologies eg. IPSEC VPN, SSL VPN, IPS/IDS, Cisco ASA, Firepower, Fortigate,
• Good knowledge in network access control(NAC) product, eg Aruba Clearpass Policy Manager, Cisco ISE.
• Excellent interpersonal & communication skills
• Current CCNA/CCNP qualified with related professional experience, CCIE would be an advantage.

Interested applicants please submit your application with your expected salary and notice period to be considered for the role. We regret that only shortlisted candidates will be notified.

As part of any recruitment process, we collect and processes personal data relating to job applicants. We are committed to being transparent about how we collect and use that data and to meeting our data protection obligations. By applying to this post and sending us your resume, you agree to the collection, use and/or disclosure of your personal data in the manner as set out in our Data Protection Notice for Job Applicants which can be found

Logicalis is committed to protecting your privacy.

Click below to view the data protection notice.

https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

• Scheduling of installation, co-ordination with customers, internally, PE, LEW and vendors, seeking approval of installation from tenants of building, accurate and timely submission of documents, etc
• Coordination work with Customers, Building Owner/Management
• To be responsible for the Implementation Activities such as preparation of proposal and submission of design, obtaining of approval, monitoring of in-house team and contractors’ work schedule and BOQ claims, I&C and using measurement tools for troubleshooting.
• Generate project documentation such as survey report/technical proposal/As-built report
• Manage weekly report tracker update and report to project manager.
• Submission of project documentation to client
• Generate project documents templates
• Prepare TP / As-Built reports
• Conduct documentation control training

Job Requirements:

• Diploma / ITE in Engineering, either in the area of communications or RF Wireless Communications
• At least 2 years of relevant experience in telecom wireless industry
• Basic RF (Radio Frequency) / Telecommunication knowledge
• Ability to operate, analyze, test and read measurements in Radio Frequency and able to use TEMS / Nemo / Site Master is essential
• Basic M&E (Electrical and Mechanical) Knowledge
• Basic cellular network communications knowledge, configuration and operations
• To perform project coordination and control duties and auditing, etc
• Able to commission / integrate / troubleshoot / test Ericsson equipment is an added advantage
• Good team work and interpersonal skills
• Hands-on knowledge on autocad drawing is an added advantage
• Good command of English
• Preferably Singaporean

Responsibilities

• Ensuring all sub-contractors comply fully with the relevant recommendations of LTA M&W requirements
• Preparing and submitting the Weekly & Monthly Quality reports.
• Follow up with conformity certificate, calibration certificate and plant calibration certificate from other agency.
• Maintaining the RIN Register and follow up with QPS for closing.
• Review daily inspection report and issuance of observation or NCR (Non Conformity Report) according to concerned department.
• To arrange QPS for inspection including the reinforcement cages, sitting out, guide wall, slurry quality (powder moisture, slurry density, viscosity & gel strength), final depth pf trench,trench profile check (koden alignment check), stop end, inserts, concrete slump, temperature, casting duration, cut-off level, ground level, backfilling (LSS) and lean concrete.
• To be physically present during Asphalt pavement work for Road diversion work.
• Study Shop drawing and liaise with design department on the design issue that may cause difficulty in production.
• To conduct mould inspection for every new mould and mould in use.
• Materials ordering
• To arrange production based on Daily Production Planning from planning department.
• Responsible for achieving the daily planned volume/productivity.
• To do prep our inspection together with production supervisor and RTO

Requirements

• Degree in any Engineering Discipline
• Minimum 5 years experience in QA/QC works in construction industry
• Experience in structural steel works or precast RC works
• Good interpersonal skills and communication skills

Configure and maintain the CICD pipelines, incorporating streamlined changes and release management process.

• Develop scripts and sets up necessary automation tools used to and deploy software releases production environments. build, integrate to various platforms, including development and

Automates the configuration management of development, quality assurance, and production workloads as well as the automation of Cl of the codebase and the CD of releases.

Designs, builds, optimises and monitors the automation systems solutions to identify system bottlenecks, production issues to maximise service availability.

• Builds automation framework for deployment, management, monitoring of applications, as well as maintains the configuration and deployment tools to auto- scale the application platform.

Develop automation and processes to enable teams to deploy, manage scale and monitor their applications in cloud and data centre.

• Implement configuration management system for business continuity management and automate disaster recovery measures.

• Provision virtual machines, databases, application containers and licenses for development team.

Performs security checks such as infra level VA, open source libraries scan etc.

Experience and skills requirements

Degree in Computer Science, Computer or Electronics Engineering. Information

Technology or related disciplines. Must have minimum 3 years of working experience in this role.

Excellent understanding of Software Development Life Cycle, Test Driven Development, Continuous Integration and Continuous Delivery. Experience working with high availability, high performance, high security, multi-

data center systems and hybrid cloud environments. Demonstrable skills in three or more programming/scripting languages such as Bash or Powershell.

Experience with version control systems such as Git.

Experience with such as GCC (ie. AWS, Azure, Google Cloud) Ability to troubleshoot complex issues ranging from system resource to application stack traces.

Comfortable with Agile methodologies and working closely with product development teams.

Experience in one or more automated provisioning tools such as Vagrant, Ansible. Puppet, Terraform, or cloud automation tools.

Experience in one or more Cloud infrastructure such as OpenStack, CloudStack, vSphere.

Knowledge of RPM bile deployment, management and design.

Knowledge of disaster recovery, system backup and restore.

Experience in one or more virtualization technologies (KVM VMware, Hyper-V)

Knowledge of container technologies such as Docker, Kubemetes Knowledge of Coad Native Computing Foundation (CNCF) such as Prometheus

Helm, Argo, istio, Gatekeeper, Crosspiane etic Experience with Application Development in an enterprise setting

Experience with DevOps toolset like GitLab, JIRA, BrBucket, Confluence

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Configure semiconductor devices, troubleshoot issues, and document engineering advancements.
• Create procedures for machinery assembly, assessment, and testing.
• Work with engineering and software teams to enhance system architecture.
• Partner with multidisciplinary engineers to address system challenges.

Requirements

• Experience in setting up automated systems.
• Proficient in electro mechatronic systems.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Job Description

- Proficient in project management software (MS Project, Primavera)

- Strong analytical and problem-solving abilities

- Communication and interpersonal skills

- Knowledge of civil engineering principles and standards, particularly in rail systems

- Develop and maintain project schedules using tools like MS Project or Primavera, ensuring timelines align with project objectives.

- Coordinate with various parties to allocate resources efficiently, managing labour, materials, and equipment for optimal productivity.

- Track project milestones, monitor progress against the schedule, and prepare regular status reports for stakeholders.

- Identify potential risks and develop mitigation strategies to minimize project disruptions and ensure timely completion.

- Assist in budget preparation and monitor expenses to ensure projects remain within financial constraints.

- Collaborate with engineers and construction teams to resolve issues and ensure adherence to technical specifications and safety standards.

- Maintain accurate project documentation, including schedules, reports, and change orders.

- Liaise with clients, contractors, and regulatory bodies to ensure project requirements are met and expectations managed.

- Conduct regular site inspections to monitor progress, identify issues, and ensure compliance with safety regulations.

- Evaluate project changes and their impacts on schedule and budget, facilitating necessary adjustments while maintaining project integrity.

- Prepare detailed project reports for management that include schedule updates, resource usage, and financial performance.

Requirements

- At least three (3) years relevant experience

- Degree in Civil Engineering recognised by the PE Board

Working hour: 8:30am – 6pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Equipment Manufacturing Company

• On-Job-Training Provided

(Two-way company transport provided from Jurong East Mrt)

Job Scope

· Designing, manufacturing, and installing components that fulfil requirements.

· Perform a full lifecycle product development (design, develop, test prototypes, manufacture and implement) （Preferably IN MARINE&OFFSHORE&MANUFACTURING INDUSTRY）

· Analyzing problems or deficiencies and developing solutions to resolve them.

· Conducting experiments and evaluations to improve and innovate product designs.

· Creating plans and designs using CAD technology.

· Evaluates final product’s overall performance, reliability and safety.

· Estimating budgets and time scopes for each project.

· Writing technical documentation for machine operators.

· Ensuring that products meet compliance regulations.

· Collaborating with project managers and other engineers in our team.

· Liaison with vendors on finalization of modules.

· Responsible for mechanical documentation.

Requirement

· Degree in Mechanical / Mechatronics Engineering or related disciplines with 3years’ experience.

· Diploma in Mechanical / Mechatronics Engineering or related disciplines with 5 years’ experience.

Singaporeans/PRs only.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR Department. We regret that only suitable candidate will be notified.

Job Responsibilities:

• Planning and scheduling of projects.
• Manage and lead a team of supervisors, technicians and operation of assigned projects.
• Manage projects and to monitor the projects are carried out with respect to the target schedule.
• To handle design for projects and to ensure clients' requirements are met.
• To attend project meeting and to coordinate with clients, consultants, main contractors and sub contractors.
• Preparation of Progress Claim, Materials Submission, Risk Assessment, Progress Report, Shop Drawings & As Built Drawings for projects.
• To forecast and anticipate possible issue for projects and to eliminate potential risks.
• Site supervision and to liaise with supervisors and workers to ensure smooth work flow.
• Planning of manpower and work arrangement with site person in charge.
• To liaise with suppliers on procurement and delivery of materials and equipment.
• Assist in settlement of project final account including variation orders.