As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description

• Industry/ Organization Type: Energy Equipment and Solution Provider
• Position Title: Sales Engineer / Manager
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5 days (Mon to Fri: 8 am-5 pm or 9 am-6 pm)
• Salary Package: Up to SGD 8000 + Allowances + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Formulate and execute sales strategies to meet or exceed revenue targets.
• Proactively identify and capitalize on new business opportunities within the BESS/ESS market.
• Cultivate and sustain robust relationships with clients, partners, and key stakeholders.
• Offer technical guidance and detailed product insights to clients to facilitate informed decisions.
• Develop and present persuasive presentations and proposals tailored to client needs.
• Maintain a keen awareness of industry trends, market shifts, and competitive dynamics.
• Work closely with marketing and product development teams to ensure sales strategies are integrated with overall business objectives.

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering
• Min 3 years of working experience in Sales, specifically within the energy storage or EV charging industry
• Proficient in Microsoft Office and CRM software
• Willingness to travel across the Southeast Asian region as needed

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69365 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Company Profile
Julian Grey's client is a precision engineering firm for laser, optics, and photonics.

Responsibilities

• Create comprehensive electrical circuit diagrams for automation and equipment systems.
• Assess, integrate, and validate hardware to ensure compliance with technical specifications.
• Produce CAD drawings depicting electrical circuits.
• Assist in diagnosing and resolving issues with system assembly, operation, and testing.
• Aid in equipment setup, problem-solving, and occasional installation.
• Provide assistance in testing new hardware and applications in-house.

Requirements

• Experience in automation machine design, proficiency in Electrical Design Software, electrical/electronic circuits and test instrumentation

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860

Only Shortlisted candidates will be notified

Quek Jian Wei

Reg No. R22110928

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Job Responsibilities

• Provide comprehensive security assessments for IT operations, ensuring the implementation of suitable security measures.
• Assist in the development and maintenance of security policies, addressing risks, and implementing measures to enhance system reliability and prevent unauthorized access.
• Collaborate with internal vulnerability assessment teams to analyze systems, identify vulnerabilities, assess risks, and determine protective measures through annual security assessments.
• Conduct information security and risk management awareness training programs.
• Investigate corporate infosec incidents, identify threats and their impact, and coordinate remediation efforts.
• Work with teams to achieve international accreditations such as ISO 27001, ISO 27017, ISO 27018, CREST, SOC2, and more.

Requirements

• Experience with enterprise information security and information risk management

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Responsibilities

1. Develop design requirements of an NPU given system level specifications.
2. Being part of modelling the performance of the NPU module and its data transaction throughput.
3. Microarchitecture design and RTL coding using Verilog / System Verilog HDL for various sub-blocks of the NPU.
4. Understanding the mathematics of different convolution operators including different arithmetic formats (fixed point and floating point)
5. Estimate, measure and optimize PPA (Performance / Power / Area) to meet key objectives and results.
6. Optimizing micro-architecture design for low power and area is required.
7. Work closely with verification engineers to ensure comprehensive testing and debug issues.
8. Support integration into the overall system, conducting design checks, and addressing lint/timing/CDC issues.
9. Collaborate with software teams to assist in compiler and toolchain development and their debugging.
10. Produce clear and concise design documentation.

Requirements

1. 8+ years of digital design with at least 2 to 3 years of SoC design experience is preferred.
2. At least one cycle of NPU design completion experience is required.
3. Hands on in digital design experience is a must.
4. Preferably has lead a team of at least 3 to 4 people in the past at the capacity of a design lead.
5. Experience in microarchitecture design, and RTL coding with Verilog/ System-Verilog.
6. Experience in synthesis, with analysis of power, timing and area.
7. Disciplined, quality-minded, and highly driven for excellence.
8. Excellent team player and good communication skills.
9. MSEE/BSEE in Electrical Engineering or Computer Engineering.
10. Understanding of convolution operator and number system is required.
11. Candidates with relevant experiences would be offered as Senior, taking on higher responsibilities.
12. Experience in UVM verification methodology is a plus.
13. A plus to have SoC design experience.
14. Experience with optimizing micro-architectures for low-power and low-area is a plus.
15. Knowledge in deep learning algorithms such as CNN / Transformer is a plus.
16. Experience with past design experience with NPU / GPU / DSP design is a plus.
17. Experience with ARM or RISC-V processor systems is a plus.
18. Passionate and strong in general programming is a plus.

We are looking for multiple seasoned Senior and Staff System Engineers to grow an Edge AI & Systems software team to the next level. This team works within the larger ASIC team to architect and enhance Neural Network solutions in the Video Processor roadmap including these current and older products:

• https://www.ovt.com/products/oax8000/
• https://www.ovt.com/products/oax4600/
• https://www.ovt.com/products/oa7100/

Deliveries:

• Neural Network Processor (NPU) architecture, programming Model, simulation, verification, profiling and optimization
• Specification, review and verification of other IP blocks
• FPGA images and IO boards for pre-silicon verification and design exploration
• Boot ROM, bare metal BSPs, sample applications

Responsibilities:

• Support Inference Engine, Toolchain and ASIC teams on NPU
• Constantly improve productivity through automation in all areas

Skills:

• Strong ANSI C bare-metal design, implementation, optimization and debugging using GCC-like toolchains
• Strong processor architecture knowledge: ARM/RISC-V ISA, symmetric multiprocessing, cache architecture, SIMD, Vector Processing, custom instructions
• Strong software, hardware and FPGA debugging capability
• Good communication, collaboration, task estimation & reporting, CI/CD via tools such as Confluence, Git, JIRA etc
• Familiarity with

o Python for prototyping, demo, verification and/or automation

o OS: GNU/Linux, proprietary RTOS, Bare metal

The following will be advantageous:

• Detailed and comprehensive understanding of TinyML (e.g. TensorFlow Lite for MCUs), from training, quantization through to operator execution, optimizing for power, performance, and size.

Requirements:

1. Ph.D/MSEE/BSEE in Electrical Engineering, Computer Science or Computer Engineering
2. At least 5 years of commercial embedded system architecture and development experience.

The Air Traffic Management Research Institute (ATMRI) is the first institute in Singapore to be entirely dedicated to Air Traffic Management research. As part of its agenda for innovation, it is seeking to recruit a Research Engineer to work on the AI-Assisted ATFM project, to deliver an operationally ready prototype of an AI enabled ATFM system. This job will be responsible for contributing to the research transition into development, by documenting existing AI tools, including those designed by ATMRI researchers, and integrate them into operational software development.

Key Responsibilities:

• Interpret research papers and program, for conversion into applicable software development. Develop a vision for transforming research papers into technologies ready for deployment.
• Design and develop the front and backend of the applied research, for operational use. Work closely with the researchers and stakeholders to design a user-centric, ready for development software that emphasizes the benefits for end-users.
• Rigorously document every aspect of the software development, for integration into industrial development.
• Participate in meetings and workshops with fellow researchers and stakeholder partners to discuss the future directions for research and development.

Job Requirements:

• Bachelor / Master of Engineering in Computer Science or a related field.
• Impeccable English writing and communication skills
• 1+ year experience in industrial software development
• Experience in the development of APIs, UI, authentication and actualization systems, with proficiency in several programming languages (Python, Java, C++…)
• Industrial or operational prior experience in air traffic services is a plus.

We regret that only shortlisted candidates will be notified.

Responsibilities:

• To lead and drive the requirements gathering process.
• To lead and manage a small team of developers to deliver the modules to develop web-based application systems.
• Participate in the design and development of web applications based on Ecquaria’s product (J2EE-based).
• Lead and manage the user acceptance testing process.
• Implement, customize, test, document and maintain software applications.
• Ensure that the modules delivered are according to the specifications and are of high quality.

Requirements:

• A Degree/Diploma in Computer Science with at least 3 years' software development experience in Internet technology in Win NT, UNIX or LINUX platform
• Those with leadership experience may be considered for the Project Lead position.
• Technical skills include proven object-oriented programming experience with Java and C++ together with extensive RDBMS through JDBC
• Experience in J2EE, Web Services and XML will be advantageous
• Experience in Elixir reporting solutions will be advantageous
• Very strong in SQL
• Data analysis skill will be an added advantage, although this is not compulsory to have.
• Good interpersonal skills

Toppan Ecquaria is an equal opportunity employer and values diversity within our company. We welcome all interested candidates to apply for this position, however, we regret to inform that only shortlisted candidates will be contacted by us for an interview.

Find us at www.topppanecquaria.com or www.linkedin.com/company/toppan-ecquaria

For more career opportunities, please visit our career site at:- https://toppanecquaria.com/careers/job-openings?utm_source=Jobstreet&utm_medium=Page&utm_campaign=2020

(Please copy & paste the above link onto your browser)

• Provide pre-sales technical support to propose cost competitive system design solution based on tender spec & customer requirement
• Design solutions for Access Control, CCTV, Public Address, Emergency Voice Communication, Fire Alarm, Integrated Security Management and other necessary system as deemed required by the prospective customer / project (90 %)
• Foundational understanding of IT and Network systems will be necessary in design and technical assessments.
• Knowledge of Cyber-security issues and solutions will be an advantage.
• Review technical specification, system schematic, floor-plan drawings documents
• Provide system proposal and design that meet requirements & be cost competitive
• Manage the technical Compliance Appraisal, prepare Bill of Quantities and system write-up for the designed systems
• Manage Installation Work Appraisal (Scope of Work for installation)
• Prepare technical document submissions & product sourcing
• Support technical meeting with customers, end-users, consultants & vendors etc
• Demonstrate systems / products performance to clients and staffs
• Collaborate with sales, purchase & admin teams to meet tender submission date in time
• Product evaluation & POC support on potential system
• Report various system job request status with respect to milestone schedule to Section Head and all technical problem hindering system design progress

• Basic Salary UP$5500 + Allowances

• Working hour: 8:15am – 5:30pm (Mon - Fri)

• Company located at Joo Koon

• Company transport provided at Jurong East MRT

• AWS + Variable Bonus + Excellent Welfare

• Well Established US MNC Manufacturing Company

Job Scope

• Develop new businesses in ASEAN and Oceania regions
• Control the operation on supply and sales operation in ASEAN and Oceania regions
• Survey market for opportunities for sales expansion
• Derive and achieve sales budget
• Grasp market information for sales strategy setting

Requirement

• Diploma / Degree in relevant discipline
• 1 - 3 years of relevant working experience in Electronics (semiconductors) / Infra-structure Industry is an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Description:

• Assist in the installation, calibration, and commissioning of medical equipment.
• Perform routine inspections, preventive maintenance, and repairs on medical equipment.
• Troubleshoot equipment malfunctions and provide timely resolutions.
• Maintain accurate documentation of equipment maintenance and repair activities.
• Adhere to all safety protocols and regulations.
• Any other duties assigned from time to time

Requirements:

• Min Diploma in biomedical / Electronic / Electrical / Mechanical Engineering
• No exp needed, training provided

Office hours, Mon to Fri

convertible to perm after 1 year

Up to $2.6K

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

Key Responsibilities:

• Assist in the planning, execution, and monitoring of civil engineering projects to ensure they are completed on time and within budget.
• Supervise construction activities on-site, ensuring compliance with technical specifications, safety regulations, and quality standards.
• Liaise with project managers, clients, subcontractors, and authorities to ensure effective communication and project alignment.
• Conduct regular site inspections to monitor progress, quality of work, and adherence to safety protocols.
• Review technical drawings and designs for accuracy and ensure they are implemented correctly on-site.
• Prepare progress reports and documentation for management and stakeholders.
• Identify potential issues or risks during project execution and develop appropriate mitigation strategies.

Qualifications:

• Education: Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board (PEB) or Building Construction Authority (BCA).
• Experience: Minimum of 10 years of relevant local experience in civil engineering projects, specifically in infrastructure, sewer & drainage, and roadworks.
• Certifications: Possession of Resident Engineer (RE) or Resident Technical Officer (RTO) certification is preferred.
• Project Exposure: Experience working on LTA or PUB projects is highly desirable.

Skills:

• Strong technical knowledge of civil engineering principles and practices.
• Excellent leadership and team collaboration skills.
• Proficient in project management software, AutoCAD, MS Office, and MS Project.
• Ability to work independently with minimal supervision while meeting tight deadlines.
• Strong problem-solving skills and attention to detail.

Benefits:

• Competitive salary package commensurate with experience.
• Opportunities for professional development and career advancement.

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Larry Loh Yi Song
Registration Number: R23115969
AlwaysHired Pte Ltd
EA Licence No: 24C2293

Scope:

• Identify and develop new business opportunities by prospecting and networking with potential customers.
• Build and maintain strong relationships with existing clients to secure repeat business and identify upselling opportunities.
• Meet or exceed sales targets and contribute to the overall growth of the business.
• Provide in-depth technical consultations to customers to understand their requirements for pneumatic systems, motion control, and fluid handling.
• Recommend and design customized solutions based on client needs, utilizing company products and capabilities.
• Conduct product demonstrations and technical presentations to highlight product benefits and ROI.
• Monitor industry trends, competitor activities, and market conditions to identify opportunities and adapt strategies.
• Prepare accurate and competitive technical proposals, quotations, and tenders for customers.
• Act as the primary point of contact for customers during and after the sales process, ensuring seamless communication and support.
• Resolve customer concerns and ensure long-term client satisfaction.

Qualifications:

• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related field.
• Minimum 5–7 years of experience in technical sales or business development within the industrial automation or fluid control sector.
• Proven track record of achieving and exceeding sales targets.
• Proficiency in CRM tools, sales reporting, and MS Office applications.
• Problem-solving skills with the ability to handle complex technical discussions with customers.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

• Degree holder with about 8 years’ experience
• experience in design and implementation.
• Able to multi-task and work in a fast paced environment
• Possess initiative, drive and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, please click to apply. joey.teo(a)bayesrecruitment.com

Bayes Recruitment Pte Ltd

16 Collyer Quay, Singapore 049318

bayesrecruitment.com

EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Position title: Sales Engineer
• Location: Loyang Way, Loyang Industrial Estate
• Working Days: Mon - Fri
• Working hours: 830 a.m. to 530p.m.
• Salary: $3,000 - $4,500 (depends on experience)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Inspect, maintain, and repair electrical systems
• Responsible to calculate electrical usage and voltage
• Perform installation of new electrical systems, wiring, and components on construction site
• Ensure all work complies with regulations, safety standards, and environmental guidelines
• Conduct regular inspections and preventive maintenance to minimize the risk of electrical failures

Requirements:

• Nitec in Electrical and Electronics Engineering or its equivalent
• Minimum 2 years of related working experience
• Knowledge in electrical systems and automation in construction industry
• Strong communication, teamwork, and interpersonal skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R24121656

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Responsible for the design, implementation and monitoring of all electrical related works at site
• Detailed design of all Electrical related works
• Interpret tender drawings and studies the contract documents and applicable standards or specifications prior to design of the Electrical works
• Manage directly and provide engineering and technical supports to all the electrical work groups at site
• Coordinates with Client / Consultant’s representatives for any site instructions and inspection of works
• Support the Construction Manager in accomplishing all the goals and targets for the electrical groups at site
• Ensure that all the works done are in accordance with the approved construction drawings, contract documents, project specifications, and all applicable standards whether local, national or international standards
• Ensure that all site works are done according to all applicable quality standards
• Directly responsible for the safety of all electrical group personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary and environmental standards.

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attend meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensure that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provide written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

QUALIFICATIONS, SKILLS & EXPERIENCE REQUIRED

• Minimum 5 years’ experience as an Electrical Engineer within a similar industry.
• Degree in Electrical Engineering with more than 5 years’ experience in basic design requirements, fabrication, installation, T&C and all site activities related to all electrical works.
• Familiar with all electrical engineering methodologies as well as the corresponding equipment, materials, consumables and tool allocations related to electrical works.
• Ability to work as part of a close-knit management team and manage numerous activities / projects simultaneously – both short and long term.
• Ability to work on own initiative and with the minimum of supervision
• Outgoing personality essential for dealing directly with Clients and their design team
• Demonstrated ability to work independently to organize and prioritize demands, handlemultiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast-paced environment with multiple and competing demand

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (separate living arrangements provided, includes four round-trip tickets to Singapore annually)

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Our client provides the machinery, tools and technology in getting the best end glass quality.

• Manage all maintenance related problems on site, troubleshoot and provide technical support to customers.
• Responsible for site acceptance tests, commissioning and start-up assistance.
• Handle the customers on after sales service, understand and help customers define their needs.
• Perform trainings to enable users in optimizing the product performance.

Requirements:

• Diploma in Electrical/Mechanical/Mechatronic Engineering or equivalent
• At least 2 years of relevant working experience in servicing machineries.
• Independent with good time management skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

About the role

We are seeking an experienced System Engineer (IT) to join our client's team on a contract basis. This is a critical role that will be responsible for maintaining and supporting the company's IT infrastructure and systems. The successful candidate will be based in the Boon Lay West Region.

Job Responsibilities:

• Provides in-house IT support including day-to-day operations, monitoring and problem resolution for all the servers/storage/network devices, desktops etc.
• Administer the system backup and recovery.
• Maintain system security and compliance.
• Maintenance of Anti-Virus system.
• Configure and support network equipment.
• Provide help desk support and escalate problem identification, diagnosis and resolution with third party vendors.
• Ensure regular vulnerability assessments are performed in accordance to organization policies and practices.
• Manage and support on-going patch management processes. Responsible for coordinating, testing, deployment and validation of security patches.
• Manage IT system infrastructure, maintain IT assets for hardware/software inventories and software licensing.
• Maintain accurate documentation on networks and systems.
• Monitor system logs and activity on all servers and devices.

Requirements

• Minimum Diploma in Information Technology-related studies.
• Minimum 3 years’ hands-on experience in system administrator role.
• Well verse in Window Clients and Window Servers 2012-2019.
• Experience in managing virtualization technologies like VMware server/ESXi.
• Strong working knowledge with Cisco Router/Switches would be an advantage.
• Working knowledge of Security appliance (FortiGate) will be advantage.
• Strong troubleshooting and critical thinking skills.
• Good communication and interpersonal skills.

If you are interested, please submit your application here.

Thank you for your application and we regret that only shortlisted candidates will be notified.

“By sending us your personal data and curriculum vitae (CV), you are deemed to consent to P-Serv Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.p-serv.com.sg/priv.... You acknowledge that you have read, understood, and agree with the Privacy Policy.”

P-Serv Pte Ltd

EA License No: 90C3494

Sharmila Damodharan | EA Personnel: R22107764

You may also reach me at 9777 6201 for further information.

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Kaki Bukit (East)

Your Responsibilities: -

• Generate mechanical drawings
• Coordinate with customers about requirements and feedbacks
• Ensure drawings are in correct specification and requirements
• Follow-up of assembly and installation work

You will need: -

• No experience required, traning provided

Apply now or email to [email protected]

Good luck! Only shortlisted candidates would be notified.

Ho Tze Chin (Kenny) R1762905 Recruit Lync Pte Ltd 22C1000

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI