Job Description:

• Provide support for current and future enterprise systems
• Adherence to the administration of Global - IT security policies, procedures, best practices and esatablished standards
• Participate in the optimization of IT Infrastructure implementations, forecasting and maintenance
• Provide management with ways to improve administration, monitoring, reporting and standard operating procedures
• Implement and maintain network hardware based on the IT initiatives and required upgrade projects within the organization
• Design, plan, install, review and evaluate wired and wireless network infrastructure
• Troubleshoot network systems including any reported routing or switching problems and recommend improvements required to enhance performance
• Implement and/or change router/switch configurations
• Provide network-monitoring services utilizing various network management tools
• Work with vendors and customers to minimize and/or plan downtime
• Provide documentation and diagrams for all network projects that will be used for disaster recovery readiness on an ongoing basis

Job Requirements:

• Associate degree or work experience
• Minimum 10 years working experience in a large enterprise network environment including a multi-protocol network, problem resolutions, extensive knowledge of the OSI model and familiarity with Arista Network hardware; network management services, including proactive monitoring and performance reporting
• Experience with various network monitoring tools and methodologies
• A core understanding of advanced networking technologies and solutions including but not limited to: MPLS, virtual route forwarding, virtual device contexts, policy-based routing, ether-channel, QoS, traffic-shaping, load balancing, VPN tunnels, WAN Optimization, firewalls, subnetting, VLANs, STP, Spine and Leaf architecture, packet captures, etc.
• Strong working knowledge of structured cabling systems, network facilities, electrical requirements, UPS etc

Job summary:

We are seeking highly talented Software Engineer with experiences in developing network/communication middleware for embedded system or automotive ECU system is preferable.

Duties/ Responsibilities:

• Innovate, create and invent network/security technologies (including product, platform, module and function) for rapidly changing automotive products to enable the megatrend of ACES (Autonomous Connected Electric Shared).
• Design and develop protocol stacks for Vehicle Network/Communication functions or systems (including but not limited to Ethernet, CAN, LIN, FlexRay, Optical related.)
• Develop software middleware for communication such as DoIP and SOME/IP stack based ecosystem.
• Lead or participate in product software architecture definition and design which meet automotive OEM requirements.
• Ensure and carry out forward design process and document quality according to V model to fulfil stringent automotive industrial standards.
• Implement software programme to realize defined architecture & design.
• Behave independently as technology domain representative for internal and external customers.

Requirements:

• Bachelor's degree or above in Electronic/Computer Engineering or related field with 5 years' experience in the embedded system development, preferably in automotive industry.
• Innovative mindset with ability to think critically and solve problems
• Experience in software development using C++.
• Knowledge of Operating Systems (OS) concepts and Data Structures, Inter Process Communication and Algorithms.
• Familiar with Service Oriented Architecture. Cloud Native development experience is an added advantage.
• Deep understanding of network layer components such as IPv4, IPv6, routing, forwarding, TCP/IP.
• Experience in software development in Linux is a must. Knowledge of Real-time operating systems (RTOS), Android Auto or QNX will be an added advantage.
• Experience in Python or Rust will be an added advantage.
• Experience in Adaptive Autosar or Robot Operating Systems (ROS) will be an added advantage.
• Experience in developing time-critical functions in embedded systems.
• Proficiency with network monitoring protocols and tools.
• Prefer candidates have experience with embedded ARM processor.

• Need to be Fluent in English both written and speak
• Required with Technical or Engineering background .
• Require to carries out technical or engineering works as specified by superior
• Any other works that is directly or indirectly related to any of the job duties.
• Co-ordinate all works & arrangements with Production & Sales Department.
• Co-ordinate with Production for Purchasing Tasks.
• Require to attend site survey or evaluation to assess customer technical issues or problems
• Making essential proposal along with quotation to customers
• Be an excellent team player.

~ Minimum Nitec qualification in Engineering.
~ Fresh graduate are welcomed but with Engineering/Marine/Petrochemical Industries experience will be an added advantage.
~ Strong customer relationship, good interpersonal and communication skills.
~ Good knowledge in Microsoft Office, especially in Excel, Powerpoint & Word.
~ Singaporean / PR preferred.
~ Must Possessed with at least Class 3 license

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer

Internal Code: A24107

This is a 6-month-contract role.

What will you do?

We are looking for software developers that are open and enthusiastic about end to end software delivery and trying out new technologies.

Be part of a cross-functional development team that values quality, automation and user experience of the software we deliver.

• Mainly responsible for software design and development of web frontend and backend applications
• Write automated functional and unit testing for the code you write
• Develop backend APIs & databases supporting the applications
• Design and develop applications leveraging cloud technologies
• Assist DevOps Engineer on build and release automation
• Work closely with fellow developers in pair programming and code review
• Work closely with Business Analyst, Quality Engineer, User Interface/User Experience Designers to deliver features

What are we looking for?

• Experience with front-end development framework such as ReactJS
• Experience in server-side web application development using Node.js
• Experience on working on CI/CD pipeline
• Experience of leveraging on cloud platforms such as Amazon AWS, Azure or Google Cloud Platform (GCP)
• Familiar with Javascript unit testing frameworks such as Jest or Mocha
• Familiar with Agile and Continuous Integration and Delivery Practices
• Familiar with version control using Git
• Open to work on other platforms because we want a cross-functional team
• Solid Fundamentals in Javascript & Typescript
• Familiarity with building reusable web components will be an advantage
• Familiarity on how search engines components work (crawl, index, search)
• Familiar with practices such as Test-Driven Development and Behavior-Driven Development
• Familiar with Docker
• Collaborative team player with good interpersonal and presentation skills
• Minimum of 3-5 years of software development experience
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is a plus.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Engineer (Java)

Internal Code: A24108

What will you do?

We are looking for software developers that are open and enthusiastic about end to end software delivery and trying out new technologies.

Be part of a cross-functional development team that values quality, automation and user experience of the software we deliver.

• Mainly responsible for software design and development of web frontend and backend applications
• Write automated functional and unit testing for the code you write
• Develop backend APIs & databases supporting the applications
• Design and develop applications leveraging cloud technologies
• Assist DevOps Engineer on build and release automation
• Work closely with fellow developers in pair programming and code review
• Work closely with Business Analyst, Quality Engineer, User Interface/User Experience Designers to deliver features

What are we looking for?

• Experience in server-side web application development using Java, Spring Boot
• Experience on working on CI/CD pipeline
• Experience of leveraging on cloud platforms such as Amazon AWS, Azure or Google Cloud Platform (GCP)
• Familiar with Javascript unit testing frameworks such as Jest or Mocha
• Familiar with Agile and Continuous Integration and Delivery Practices
• Familiar with version control using Git
• Open to work on other platforms because we want a cross-functional team
• Familiarity with building reusable web components will be an advantage
• Familiarity on how search engines components work (crawl, index, search)
• Familiar with practices such as Test-Driven Development and Behavior-Driven Development
• Familiar with Docker
• Collaborative team player with good interpersonal and presentation skills
• Minimum of 3-5 years of software development experience
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is a plus.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Responsibility：

•Service existing customers and develop new clients to expand Company market share for Industrial product portfolio in a designated region

•Service existing customers on rotating machinery repair relates enquiries

•Offering after-sales support services to customers

•Preparing weekly reports and call plan to the general manager

•Provide ongoing technical support & coordination from project initiation to completion

•Meet required sales targets

•Maintain pressure on customers to pay up promptly.

Job Requirement

• At least 3 years of industrial/engineering sales experience.

• Knowledge on Mechanical engineering.

• Knowledge on Measuring Tools (Such as Dia Calliper …)

• Knowledge on AUTOCAD，.

• Able to works independent.

• Able to start works immediately.

Reporting to the Assistant Vice President, you will provide failure analysis and advisory services targeted at a wide range of industrial clients within the region.

Key Responsibilities:

• Conduct engineering failure analysis (FA) and materials-related testing to identify root cause of failures
• Liaise and communicate with industrial customers, providing consultation and advisory services
• Prepare proposals, site surveys, laboratory analysis, reports, presentations
• Render support in lab and quality management

Key Requirements:

• At least a Bachelor degree in Materials Science, Mechanical Engineering or related disciplines with minimally 3 years of working experience. PhD/ Masters will be an advantage
• Experience in FA, material testing in laboratory environment and consultation field preferred.
• Good knowledge and hands-on experience in major material analytical equipment such as SEM, EDX, XRD, metallurgy examination
• Possess strong communication and interpersonal skills
• Has an inquisitive mind for new knowledge in addition to having excellent analytical skills
• Ability to manage multiple projects as a team player as well as an individual contributor
• Familiar with ISO17025 quality management system

Purpose: Responsible for the complete end-to-end planning, direction, and coordination of all the manufacturing processes related to system integration for a specific project. Together with the program team, the Manufacturing Engineer is to ensure that assembly can meet costs, quality, and delivery requirements.

Key Area of Responsibilities:

• Design of production layout to enable production to fulfill build plan forecast or pre-defined production run rate.
• Define requirements for assembly tools and equipment to support product realization and build plan.
• Participate actively in PQP to ensure that risks are identified, and preventive actions defined and implemented.
• Implement a certification program for assembly to ensure that assembly module leads are trained and certified to carry out specific assembly tasks.
• Collaborate with the Process Engineer in the design of the assembly Kit Kart for issue of materials into the clean room and effective handling of materials inside the production area.
• Lead in resolving technical problems faced by Assembly, and resolve internal and customer quality complaints.
• Monitor assembly capacity of the program, and perform ramp assessment when required, to fulfill build plan system delivery.
• Contribute to the system build progress meetings together with the program team to meet on-time delivery targets.
• Evaluate assembly efficiency and implement improvements to achieve the calculated standard time.
• Monitor all customer's consigned equipment to ensure all are inventoried, calibrated, and maintained regularly.
• Identify and implement improvements to shorten production cycle time, improve overall production efficiency, improve quality performance, enhance safety or to boost sustainability.
• Support and participate in company continuous improvement program.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Mechatronics, Electrical, Precision or Industrial Engineering)
• At least 3 year of experience as an engineer in the manufacturing assembly environment.
• Strategic, creative, and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Responsibilities:

• Assist in planning, executing, and coordinating construction tasks according to the master and detailed work schedules.
• Prepare and submit essential project documents such as timelines, method statements, design plans, risk evaluations, and monthly updates.
• Oversee construction work to ensure it adheres to contract terms, drawings, quality standards, and Environmental, Safety & Health (ESH) guidelines.
• Collaborate with Clients, Authorities, Consultants, Subcontractors, and Suppliers on all aspects of the project, providing solutions and ensuring proper documentation.
• Coordinate with clients and consultants for site inspections, submit technical reports, and maintain accurate site records. Assist the QS department in reviewing contractor claims and progress payments.
• Attend meetings with Clients, Consultants, and Contractors to monitor project timelines and ensure progress is on track.
• Maintain an organized document control system, reviewing detailed design drawings and project specifications.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 2 years of working experience in the construction and infrastructure industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Job Overview:

We are looking for a dynamic Project Engineer with an engineering background to support to the construction and implementation of a new build incinerator Rotary Kiln. This role requires exceptional leadership, technical proficiency, and project management skills to ensure successful project delivery within set timelines and budgets.

Key Responsibilities

Project Management:

· Support to all project phases, including planning, execution, monitoring, and closure.

· Ensure adherence to project scope, timeline, and budget constraints.

· Oversee procurement, resource allocation, and subcontractor management.

Understand Regulatory Requirements:

· Conduct thorough research to understand the regulatory framework and requirements set by government agencies related to environmental permits, zoning laws, construction codes, and safety standards.

· Stay updated on any changes or updates to regulations that may impact the project.

Documentation and Reporting:

· Maintain accurate project documentation, including contracts, change orders, and correspondence.

· Review regular progress reports, presentations, and updates for project stakeholders and management.

Procurement and Resource Management:

· Identify and procure necessary materials, equipment, and services in coordination with procurement teams and vendors.

· Allocate resources effectively, including manpower, equipment, and subcontractors, to optimize project performance and efficiency.

Budgeting and Cost Management:

· Review and manage project budgets, including cost estimation, monitoring expenses, and identifying cost-saving opportunities.

· Monitor project financials, track expenditures, and ensure adherence to budgetary constraints throughout the project lifecycle.

Risk Management and Compliance:

· Identify potential risks, develop risk mitigation strategies, and implement measures to minimize project disruptions.

· Ensure compliance with regulatory requirements, environmental standards, and health and safety protocols throughout the project lifecycle.

Technical Oversight:

· Provide technical guidance and expertise on Rotary Kiln systems and incineration technologies.

· Ensure compliance with design specifications, safety standards, and regulatory requirements.

Quality Assurance and Compliance:

· Participate in quality control inspections and audits to ensure work meets quality and safety standards.

· Monitor compliance with regulatory requirements, environmental standards, and health and safety protocols.

Compliance Monitoring and Reporting:

· Implement robust monitoring systems to track and ensure compliance with regulatory requirements and permit conditions.

· Prepare and submit regular compliance reports, monitoring data, and documentation as required by government agencies.

Build Positive Relationships:

· Foster positive relationships with government officials, regulators, and agency representatives through professionalism, transparency, and proactive engagement.

· Seek feedback and guidance on best practices for environmental stewardship, sustainable development, and community engagement.

Japanese Reporting to Headquarters:

· Ensure accurate and timely reporting to headquarters in Japan, including financial reports, operational updates, and strategic initiatives.

· Coordinate with relevant departments to gather data and information for reporting purposes.

· Facilitate communication and collaboration between the headquarters and local teams to support business objectives and alignment with global strategies.

Qualifications:

• Bachelor's degree in Engineering (Mechanical, Civil, Chemical, or related field). Advanced degree or certifications are a plus.
• Previous experience in project coordination, construction management, or related roles in the industrial sector.
• Knowledge of Rotary Kiln, incineration technologies, and engineering principles.
• Strong organizational, communication, and problem-solving skills.
• Ability to work collaboratively in a multidisciplinary team and adapt to changing project requirements.

Roles & Responsibilities

- Overseeing and supervising marine construction projects till completion.

- Overseeing and supervising the rock placing and compaction work in marine construction.

- Overseeing and launching the concrete precast vertical wall in marine construction.

- Coordinate and monitor the reclamation work in the project and at the supply source.

- Liaise and coordinate with marine and land survey team.

- Implement and monitor safety matters accordance with Work Place Safety and Health regulations.

- Coordinate and supervise the subcontractors and direct construction workers.

- Monitor, review and report the work progress to immediate superior daily.

- Plan ahead and problem-solving skill will be added advantage.

- Ability to communicate and work with client, consultant and subcontractors.

- Positively work with management and operation team.

Job Requirements

- Degree or Diploma holder in Civil Engineering.

- Preferably 2 to 3 years’ experience in Reclamation, Marine Construction and Civil Engineering works.

- Fast learning and understand the process of marine construction.

- Leadership and coordination skill.

- Competent in Microsoft Excel, Words and AutoCad.

- 5.5 days working week.

- Project Site at Woodlands area

Responsibilities

• Create detailed technical drawings, including plans, elevations, sections, and details.
• Ensure drawings adhere to Customer's spec and requirements.
• Use AutoCAD software to generate accurate and professional-quality drawings.
• Work closely with engineers and other team members to understand project requirements.
• Inquire about specific design elements, materials, and dimensions.
• Incorporate changes and revisions into drawings as needed.

Requirements

• Min Degree in Mechanical engineering or a related field
• Proven experience in using AutoCAD software.
• Strong understanding of drafting principles and techniques.
• Attention to detail and accuracy.
• Ability to work independently and as part of a team.
• Good communication and interpersonal skills.
• Proficiency in relevant software (e.g., Microsoft Office, Adobe Acrobat).

- In charge of production, scheduling, planning and coordination of the assigned projects.

- Liaise with contractors on the requirements of the projects

- To assist the Project Manager in the coordination and execution of the projects

- Preferably experience in post tensioning and precast segment bridge construction

- To perform the duties which are assigned from time to time

Job Description

• Able to perform hands-on work and lead operators.
• HVAC, Air compressor & Pneumatic system maintenance.
• Machinery (M&E systems) troubleshooting & maintenance, general maintenance.
• Support manager on daily operation (job scheduling, logistics etc.)
• Carry out routine maintenance
• Coordinate with all production sections to schedule and carry out machine repair and maintenance, fabrication and installation projects requested by production sections
• Lead a team of workers to carry our machinery and plant maintenance, including troubleshooting & repair, building repair, maintenance and renovation works.
• Any other tasks and responsibilities assigned as and when necessary.

Job Requirements

• At least 5 years relevant working experience preferably in manufacturing environment.
• Must have good all rounded knowledge and practical experience in general plant maintenance, including electrical wiring, plumbing, air-con installation & servicing, air compressor maintenance, Knowledge & Experience in Industrial Internet of Things (IIOT) etc.
• Possessions of Fire Safety Manager (FSM) Cert will be an advantage

Personality

• Hardworking and committed
• Possess self-discipline and initiative
• Possess sense of urgency
• Must be self-starter and self-motivator.
• Willing to work in a team
• Report writing skills
• Able to communicate well with others

Job Description

• Manage the company’s projects
• Coordinate between client, company, factory and work site staff
• Work on ensuring good quality and maintain delivery schedules
• Liaise with QA/QC for the third party/client inspections, class survey certification, etc

Requirements

• Degree in structural / marine / naval architecture / civil / mechanical engineering
• Min 2 years of working experience in similar industry
• Good written and spoken English
• Experience in quality assurance and project management, preferably in the construction, marine, or offshore industry
• Leadership qualities expected
• Able to plan and manage project independently
• Come and convince us why you are the best person for the job

As a Software Engineer in D-SIMLAB, you will get exposure in both technical and soft skills development. The role does not limit to only software development, but also involves in providing professional consultation services to customers, with the following key responsibilities:

Work together with a team of highly skilled Software Engineers and Data Scientists in software product deployment and delivery at world leading semiconductor manufacturers.
Actively involved in product enhancement (in the area of visualization and algorithms) which improves the quality of D-SIMLAB product.
Responsible for key software components development.

We are looking for candidates fulfil the following criteria:

Bachelor/Master Degree specialises in Computer Science/Engineering or Industrial Engineering.
Diploma holders with relevant experience are encouraged to apply.
Enjoy working with experts with different cultural and technical backgrounds.
Love to travel the world and work on challenging projects.
Interest in career progression by strengthening your technical and soft skills.
Fresh graduates are welcome to apply.

· Customizes CMS database check sheets and allocation of check sheets based on latest engineering drawing revisions and punch list updates for mechanical/ electrical process/safety /HVAC discipline

· Prepares boundary drawings as per subsystem listing

· Prepares procedures/ work method statements and risk assessment for mechanical/electrical process/ safety/ HVAC commissioning activities

· Attends Factory Acceptance Test at vendors' premises, as required. (FAT)

· Leads a team of mechanical electrical technicians/ mechanics for preparation and site execution of pre-commissioning, commissioning and function testing of mechanical equipment and vendor equipment packages on the topsides

· Reviews commissioning shipped-loose items, consumables and spares for proper inventory and availability

· Reviews system / sub-system completion status for taking over from Construction Team as per commissioning schedule and priorities

· Liaises with various parties including vendor site representatives, where required, to ensure any issues affecting system completion are resolved in a timely manner

· Participates in system / sub-system joint inspections for taking over from Construction Team, punch listing activities,

· Able to travel oversea

· Prepares relevant documents required for safe energization of equipment such as Livening -Up Notice, CPTW, Isolation Lists, etc

· Ensures that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures

· Reviews completed commissioning documentation such as check sheets, test procedures, red-line mark-up drawings, commissioning dossiers, etc.

· Follows up with relevant parties to ensure proper closure of outstanding issues arising from commissioning activities

· Ensure to maintain up to date punch close report

Requirements:

· Min. 3 years year of commissioning experience in the Oil & Gas/ marine industry.

· Experience in commissioning of Diesel Generators/ Compressors/ Pumps/ Piping systems / Utility packages/ cranes / mechanical handling equipment/ HVAC, etc

· Good knowledge and experience in commissioning activities of oil and gas/ marine facilities

· Familiar with permit-to-work systems and lock-out tag-out procedures

· Good analytical, problem solving and planning skills.

· Familiar with Project Specifications, Technical and HSE Standards

· Familiar with MS Office software applications (MS Outlook, Word, Excel, Power Point etc.

· Familiar with Completion Management System database such as PIMS-CMS / WinPCS / ProCoSys / ICAPS---(Optional or added advantages)

Working hours： Monday –Friday: 8:30am – 6:00pm (Transport provided from Jurong East MRT to Office)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Manage assigned projects.
• Prepare submission documents based on specifications.
• Coordinate with customers on technical issues, approvals, and schedules.
• Develop and deliver switchboard training materials.
• Compile material lists for switchboard orders.

Requirements:

• Diploma/Degree in Electrical Engineering or equivalents.
• Minimum 1year related working experience.
• Proficient in Microsoft Office, AutoCAD.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Apply functional specifications and use engineering tools to design hardware for product changes and new development
• Assist in analysis, modification and design of products and services for assigned projects which requires basic knowledge of materials, components, and their applications
• Assist and participate in testing and test results analysis for assigned projects

Requirements:

• Degree in Mechanical Engineering or similar discipline
• Basic skillset should be to design various tools & equipment with latest industry/design codes and analysis
• Knowledge on CAD packages like SolidWorks are preferred

Responsibilities:

• Proficient in reading electrical and ELV schematic diagrams.
• Coordinate with Clients/Sub-Contractors on project and maintenance matters for smooth site execution.
• Review contract specifications and prepare variation orders as required.
• Perform engineering design, load, and fault calculations.
• Resolve technical issues related to installation, commissioning, and testing.
• Ensure installations comply with approved drawings, method statements, project specifications, and standards.
• Attend site meetings to discuss and resolve issues with Clients/Sub-Contractors.
• Assist Project/Site/Construction Manager in monitoring project progress.

Requirements:

• Minimum ITE in Electrical Engineering or equivalents.
• Experienced in project management for industrial and commercial projects.
• MRT project experience is an added advantage.
• Knowledge of design phases or street lighting work is a plus.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering or equivalents.
• Miniumum 1 year of working experience in contruction industry.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Description

• Acts as a project lead by establishing development plans and preparing for design reviews.
• Guides others on engineering tools, test specifications and assesses application of Health, Safety, and Environment techniques during the design process.
• Applies and interprets engineering calculations to obtain design solutions and troubleshoot erroneous results. Defines input requirements and develops functional specifications by utilizing basic statistical methods and reliability techniques. Contributes to Halliburton’s Intellectual Property portfolio by delivering innovative and commercially successful solutions.
• Creates an impactful relationship with Halliburton’s technical community, customers, and vendors by proactively collaborating with key stakeholders.
• Participates in professional societies in area of specialization.
• Skills acquired through the completion of a degree in Mechanical Engineering or similar discipline.

Requirement

Minimum educational requirement of a doctoral degree and zero years’ experience or a master’s degree and two or more years’ related experience or a bachelor’s degree and four or more years’ related experience.