Duties to be Performed:

Senior Mechanical Engineer for HVAC Systems shall be handling on designing and delivering mechanical systems for industrial properties in semiconductors, electronics, biopharma, and related industries.

The mechanical systems include Cleanroom, HVAC, Process exhausts, vacuum, condenser, chilled water, process and process cooling water, fire protection, diesel fuel, natural gas and associated, equipment, ducts and pipe works.

The Duties/ Responsibilities of the Prospective Candidate are,

• Responsible for Engineering of Concept / Basic / Detail design for Mechanical systems with the focus of HVAC systems.
• Shall perform system related engineering calculation including heat load calculation, equipment sizing, distribution system sizing from fundamentals with spreadsheet tools.
• Shall develop design drawings including, but not limited to, PFD, Schematics and Layout for required HVAC systems.
• Engineering design of HVAC and Process Exhaust systems for new/ existing production buildings.
• Conduct feasibility study and conceptual design of Mechanical Systems throughout all technological aspects
• Review of HVAC system in preparation for testing and commissioning and validation
• Coordination and engineering in regards of R&D Equipment requirements
• Provision of engineering service for tendering, conduct site show round and brief bidders
• Develop a detailed project plan to monitor and track progress
• Create and maintain comprehensive project documentation
• Meet with clients to take detailed ordering briefs and clarify specific requirements of each project
• Coordinate internal resources and third parties/vendors for the flawless execution of projects
• Clearly define and align inter-discipline technical interfaces and scope demarcation
• Work with CAD drafters and BIM modeler to guide, check and carry out field verification with them.
• Prepare SOW (Scope of work) for bid package, including BOM for form of tender.
• Calculate system OSE (Operating System Efficiency) of chilled water system to meet MEES requirements.
• Frictional loss calculation for fan and pump head and estimation of power requirements.
• Perform psychrometric analysis on system design
• Trouble shooting of design and construction related problems and develop solutions accordingly
• To promote safe working practices and to protect the health and well-being of Employees, contractors and Customers.
• Liaising with QA / QC Engineers to ensure they are aligned with the requirements of the specification.
• Support during construction stage

Job / Skills Requirement:

• You should have a bachelor's degree in mechanical.
• You should have sound experience in mechanical systems in designing and installation works related to semiconductors, biopharma, laboratories, data centers, or process buildings.
• You should be familiar with both Singapore and Malaysia’s latest codes, standards, guidelines, regulations, and authorities requirements. Your familiarity with available equipment, modern technology, construction methods, and CAD/ BIM is an added advantage.
• You should be able to advise clients and engineers on project execution, supervising progress, and quality of work.
• Able to Travel/ Relocate

Key responsibilities

• Drive the automation and integration of privileged access management infrastructure to other systems to achieve straight through processing and reduce manual work.
• Provide on-going operations support including management reporting and operations dashboards relating to the governance oversight of privilegedaccounts and passwords.

Requirements

• 5+ Years of CyberArk Experience: Demonstrated expertise in the deployment, configuration, management, and support of CyberArk infrastructure components. Proven ability to provide regional support and integrate CyberArk solutions via APIs. CyberArk certifications are preferred to validate knowledge and skills.
• Scripting and Reporting: Proficient in writing PowerShell scripts and SQL statements to develop comprehensive management reports focused on the usage and operational management of privileged accounts. This includes automating reporting processes and ensuring accurate data presentation for stakeholders.
• Data Visualization: Experienced with Grafana for creating data visualizations and dashboards, enabling real-time insights into access management and security posture. Skilled at translating complex data sets into understandable visual formats for better decision-making.
• Privileged Access Management: Strong understanding of enterprise privileged access management principles, encompassing risk management, compliance, governance, and control. Ability to develop and enforce policies that mitigate risks associated with privileged access.
• Audit Experience: Extensive experience in responding to audit queries and preparing detailed reports related to access management. Skilled in analyzing audit findings and implementing corrective actions to address compliance gaps. Proven ability to collaborate with internal and external auditors to ensure all necessary documentation is accurate and readily available.
• Remediation Expertise: Extensive experience in remediating CyberArk failed objects to ensure that auto-managed objects comply with security policies and standards. This includes troubleshooting and resolving issues to maintain operational integrity and compliance.
• Technical Platform Knowledge: In-depth knowledge of key operating systems and databases, including Windows, Unix, MSSQL, and MariaDB. Previous experience in administering these platforms enhances ability to manage and secure privileged accounts effectively.
• Banking Environment Experience: Familiarity with working in a banking or financial services environment, understanding the unique regulatory and security requirements involved. This background supports effective implementation of access management solutions tailored to industry standards.
• Educational Background: Bachelor’s degree in Computer Science, Information Systems, or Engineering (or a related field). Alternatively, a combination of relevant professional experience and CyberArk certifications is also acceptable, demonstrating a solid foundation in security practices.

Responsibilities

• Diagnose and solve technical problems on semiconductor machinery and systems, such as computer setups, advanced software, or networked/wireless systems.
• Carry out on-site installations, continuous improvement initiatives, parts overhauls, preventative maintenance, equipment modifications, and repair work.
• Act as the main point of contact between the company and the customer for both administrative and technical matters related to assigned projects.
• Organize logistics and coordinate with customers on equipment-related issues.
• Address customer complaints, offering timely solutions to resolve their issues.
• Track product performance, providing regular updates and feedback on customer service requests.
• Report recurring customer concerns to management to help prevent future issues.

Requirements:

• Minimum of 2 years of related experience in Semiconductor Industry
• Possess at least a Diploma/Degree in Electrical or Electronic Engineering
• Good time management skills, ability to meet deadlines, and strong attention to detail
• Good team player with the ability to work independently

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: QXV54V53

• Supervise testing and commissioning of electrical equipment on-site and manage the review and submission of site acceptance test reports.
• Review and interpret Single Line Diagrams and Electrical Schematic Drawings.
• Support electrical equipment installation inspections to ensure compliance with standards.
• Participate in site activities and meetings with clients and contractors.

Requirements:

• Diploma in Electrical Engineering.
• At least 3 years of site installation, testing, commissioning and maintenance testing experience in Low/Medium Voltage Electrical Equipment.
• Possess initiative and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Summary

Responsible for designing, developing, and maintaining automated systems to enhance production efficiency and accuracy. Strong analytical and problem-solving skills are essential.

Responsibilities

• Design, develop, and implement automated systems to improve production efficiency and accuracy.
• Work closely with cross-functional teams to identify automation opportunities in manufacturing and assembly processes.
• Program and maintain PLCs, robots, and other automated equipment.
• Develop user-friendly interfaces and dashboards for monitoring and controlling automated systems.
• Conduct troubleshooting, debugging, and performance tuning for automated equipment.
• Stay updated on advancements in automation technology to recommend and implement innovative solutions.

Requirements

• Recognized degree in Mechanical Engineering, Electrical Engineering, or Automation Engineering.
• At least 5 years of experience in industrial automation, including hands-on experience with PLCs, robotics, and sensors.
• Proficiency in programming languages such as Python, C++, or ladder logic for PLCs.
• Knowledge of Industry 4.0 principles and IoT integration.
• Strong analytical and problem-solving skills.

Job Description:

• Prepare project proposals & review, and seeking for approvals. Management team and Team Leaders will provide guidance. project team, management and customers.
• Work closely with business team to handle customers. Support business team for any escalations from customers.
• Organize and ensure key project milestones are achieved, eg Design Review, Factory Acceptance Test, Site Acceptance Test, etc…
• Closely monitor progress with project Gantt chart, budget and scope of work. Resolve conflicts, remove impediments, and foster positive work environment for project team.
• Manage and maintain project documents and artefacts.
• Manage and facilitate productization of projects with manufacturing and aftersales team.

Requirements:

• Min Bachelor’s Degree, preferably in an engineering field
• Knowledge in financial accounting, systems engineering, alternative and/or clean energy is advantageous
• Proficient with MS Project or similar, MS Office Suite of tools
• Fluent in English and writing skill of clear and concise reports
• Excellent communication skill, patient and precise
• Proactive team player, also able to work independently
• Motivate others and yourself

Summary

Responsible for designing and implementing test hardware and software to validate product functionality, performance, and reliability. Strong problem-solving, organizational, and communication skills are crucial for success in this role.

Responsibilities

• Design, develop, and implement test hardware and software for validating product functionality, performance, and reliability.
• Create automated test systems and procedures to ensure consistent and repeatable test results.
• Develop, troubleshoot, and maintain test fixtures, equipment, and associated software for in-house and production testing.
• Collaborate with design and manufacturing teams to identify and address test-related issues.
• Analyze test data to identify trends, troubleshoot issues, and recommend improvements to product design or test processes.
• Document test plans, procedures, results, and maintenance requirements.
• Ensure test systems comply with industry standards and safety regulations.
• Continuously improve test processes and tools to reduce testing time and increase reliability.

Requirements

• Bachelor’s degree in Electrical Engineering, Electronics Engineering, or a related field from a recognized institution.
• Minimum of 5 years of experience in developing test hardware and software, preferably for complex electromechanical systems.
• Strong proficiency in programming languages such as Python, LabVIEW, MATLAB, or C/C++.
• Knowledge of hardware design and schematic interpretation to develop custom test fixtures.
• Experience with data acquisition systems, signal processing, and instrumentation.
• Familiarity with communication protocols (e.g., I2C, SPI, UART, Ethernet) and interfaces (e.g., GPIB, USB).
• Ability to integrate sensors, actuators, and control systems into test setups.
• Experience in using software tools for simulation, debugging, and automation.
• Ability to analyze complex technical problems and develop innovative solutions.
• Strong troubleshooting skills for both hardware and software in testing environments.

Possess extensive knowledge of power plant systems and operations, along with strong leadership skills to lead a small team of engineers and technicians. This role is crucial for ensuring that all plant engineering tasks are executed correctly. The successful candidate will oversee plant engineering designs to guarantee that the plant operates efficiently and safely.

Key Responsibilities:

• Responsible for plant engineering design activities for power plant project including cable sizing calculation, cable routing, connection drawing, loop drawings, termination diagrams
• Work with 3D design team for 2D deliverables
• Lead, mentor, and manage a small team of engineers and technical staff
• Collaborate with different parties for plant engineering coordination and support site inspection
• Provide technical support for project manager for project engineering milestone deliveries
• Support purchasing team for technical evaluation and price optimization

Desired Characteristics:

• Knowledge of onshore power plant design engineering, prefer to have work exp in Singapore.
• Experience in coordination, leading and managing plant engineering teams.
• Familiar with complicated cable tray route, cable tray support engineering design, equipment layout, installation materials, cable glands selection, cable drum schedule, cable route schedule, cable termination material, and so on.
• Proficiency in relevant engineering software and tools, such as Revit, Navisworks, Autocad
• Min 6 years experience in Electrical composite plant project

Duration: 6 months (may be extendable)
Work Location: Ayer Rajah
Working hours: 8hours a day, 5 days a week

Overview

Our client, a leading provider of advanced maritime technology and automation systems, is seeking a Service Engineer to support their regional and global customers. This role focuses on providing field service, commissioning, and technical support for integrated control monitoring systems (ICMS) and propulsion/steering control systems. Candidates with hands-on experience in main engine and thruster operations will have an added advantage.

The position involves onboard services, project commissioning, remote support, and contributing to backend knowledge sharing to support the field service team.

Key Responsibilities

• Deliver customer support, commissioning, and service for the assigned product range in maritime automation systems.
• Provide technical support and maintain strong relationships with clients across Southeast Asia.
• Perform workshop testing and technical preparations before service deployment.
• Ensure proper preparation and execution of assigned tasks, meeting performance expectations consistently.
• Generate detailed service reports, update technical documentation such as drawings and cable information, and maintain records accurately.
• Offer remote guidance and product support to customers while managing refit/retrofit project commissioning.
• Support the service team with backend technical expertise and assist the sales department with technical inquiries.
• Manage administrative duties, including pre- and post-service documentation, and handle ad hoc assignments as needed.

Requirements

• Minimum Diploma or Degree in Electronics, Electrical, or Instrumentation.
• 3-5 years of field experience in alarm monitoring and control systems, with solid knowledge of computer hardware, peripherals, and basic software applications.
• Familiarity with maritime automation systems, propulsion systems, distributed control systems, and power management.
• Prior experience in the maritime industry is essential.
• Strong skills in teamwork, communication, project management, and customer service.
• Ability to approach remote case handling with a meticulous and methodical mindset.
• Self-motivated and resourceful in finding solutions to technical challenges.
• Willingness to travel internationally on short notice.

Other key information:

• Location: West of Singapore
• Working hours: Mon to Fri, Office Hours

To apply online please use the 'apply' function, with your updated resume attached.

(EA: 94C3609/R1442042)

• Oversee contract execution and monitor installation progress, ensuring timely delivery through coordination with clients, consultants, and subcontractors.
• Prepare and review method statements, shop drawings, technical submissions, and work progress reports for M&E-related tasks.
• Liaise with stakeholders to resolve technical and site issues, and coordinate with authorities for inspections, testing, and commissioning.
• Assist in procurement of materials, equipment, and labour within budget while supporting project negotiations.
• Apply expertise in Data Centers, DfMA, and specialized systems such as VAV/VRV, chillers, chilled water pipes, and lighting control systems.

Requirements:

• Diploma in Mechanical/Electrical Engineering or equivalent.
• At least 2 years of experience handling and monitoring the progress of projects in Construction industry.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
• Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• 
  
• To be involved in the planning and designing of civil and structural engineering works
• To prepare the design and technical specifications for tenders; as well as tender documents for the bidding of civil and structural engineering projects
• To supervise in the civil and structural works
• To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients
• Any ad-hoc duties as per assigned

1) At least two years working experience

2) Able to use engineering software Staad pro, SAFE, Plaxis

3) Able to work independently under the guidance of senior / principle engineer

As a senior Java developer , the developer is expected to be hands-on, exceptionally strong coder, technical thought leader and ability to solve some of the most complicated problems with simple solutions.

Minimum 5 Years of relevant software development experience

• Proficient in Java programming language, Java 8 or above, Ideally Java 17, Object oriented programming, SQL, Spring, Spring Boot
• Technical skillset in Modern Java, Spring Framework, Spring Boot, SOAP and RESTFul.
• Unit Testing ( JUnit) , Build automation (Gradle/Maven + Bamboo)
• Knows reactive programming in the Spring Framework
• IDE ( Eclipse/IntelliJ), Git
• HTTP / HTTPS protocol, Application Security, Cache and Database and Microservice Architectures.
• Build Tools, Unit Test, CI & CD, Change Management, Communication with non-technical people, Software Engineering
• Develop and maintain micro-services with TDD (Test-Driven Development) and JAVA-based frameworks (Springboot).
• Integrate into the CICD pipeline for continuous deployment and testing.
• Front-end frameworks (React, nodejs, Bootstrap) would be a plus
• Experience in Scalable deployment – Kubernetes and AWS
• Collaborate effectively with cross-functional teams, including testers, product owners, and quality assurance teams, to ensure high-quality software delivery.
• Proactively identify opportunities for process improvement

Great to have Experience:

· 1+ years of experience in cloud platforms preferably AWS.

· Good understanding of reactJs

· Strong understanding of how APIs work

· Proficiency in CICD tools and methodologies

· Familiarity with version control tools like Git

· Experience with Agile methodologies and working in Agile teams

· Experience in Kubernetes.

Good to have Experience:

· Experience with containerization and orchestration tools such as Docker and Kubernetes

· Hands-on experience with Build tools – maven and gradle

· Hands-on experience with Atlassian Tool stack – Bamboo, Bitbucket, JIRA and Confluence

· Understanding of AWS resources

· Experience with frontend languages. (e.g. react native)

Responsibilities:

• Agree to detailed programmes of work - time chart and representation on site plans
• Check that all necessary drawings and instructions have been given to contractors and authorisations obtained, in accordance with the agreed programme
• Check that materials are ordered in good time and permits OK.
• Check that all construction work is carried out in a safe manner, and that the site is kept secure
• See that requirements of specifications in regard to materials and workmanship are complied with by contractors. This includes sample tests of material and workmanship.
• Watch for faulty workmanship and material incorporated in the works and to issue instructions for rectifications
• Check line and level and layout of structure during erection and that intentions of contract drawings are adhered to
• Check structural slab beam and column sizes and reinforcements placed and that intent of design details are followed
• Keep a record of all measurements and tests and to bring plans into conformity with the work actually executed
• Issue such further instructions and clarifications of details as and when required; and to inform Architect for issuance of Architect's Instruction or Architect's clarification.

Requirements:

• At least 4 to 6 years or more relevant experience
• A recognised university degree in Civil Engineering

• Instrumentation of measurement and detection equipment for military and homeland security.
• Oversee post-sales delivery of equipment, conduct scheduled maintenance, and conduct diagnostic analyses for troubleshooting and repair tasks.

Requirements:

• Higher Nitec in Electrical & Electronics Engineering or equivalent.
• At least 2 years of working experience

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Participate in the development and management of the Project Work Schedule, covering building works, M&E, and Process Systems, from concept design through construction/installation to testing and commissioning.
• Estimate the duration and resource requirements for key construction activities.
• Prepare technical documentation for tender submissions.
• Contribute to site planning, work scheduling, and monitoring of site implementation progress.

Requirements:

• Degree in Civil Engineering or equivalent
• At least 4 years of experience in planning construction projects for building facilities.
• Good knowledge using Primavera.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Supervise testing and commissioning of electrical equipment on-site and manage the review and submission of site acceptance test reports.
• Review and interpret Single Line Diagrams and Electrical Schematic Drawings.
• Support electrical equipment installation inspections to ensure compliance with standards.
• Participate in site activities and meetings with clients and contractors.

Requirements:

• Diploma in Electrical Engineering.
• At least 3 years of site installation, testing, commissioning and maintenance testing experience in Low/Medium Voltage Electrical Equipment.
• Possess initiative and able to work in a fast-paced environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Description:

• Corporate with the constrcution manager to connect with various government acceptance departments.
• Corporate with the constrcution manager to supervise and manage the site to meet the various goals of the project.
• Corporate closely with subcontractors to monitor the progress of small towns and coordinate the work resources required by subcontractors to meet project requirements.
• Corporate with goverment personnel to conduct on-site inspections.
• Participate in weekly or monthly meetings with subcontractors to discuss work progress and corperate in preparing monthly meeting progress reports.
• Establish good relationships with all relevant parties.
• Corporate to ensure site safety and comply with the requirements of the authorities.
• Corporate to organize relevant physical and electronic documents on site engineer, etc.
• Other tasks assigned by the manager.

Requirements & Qualifications:

• Diploma / Degree or above preferably from a recognized University accredited with PEB, Singapore
• Experience with public residential projects would be advantages
• Proficient in Microsoft Office / Projects, AutoCAD
• Ability to keep a positive attitube in a fast-paced environment
• Good team player

JOB RESPONSIBILITIES

• Perform basic drafting

• Prepare design drawings / calculations / schematic diagrams for;

Mechanical ventilation system

Fire protection system

• Perform prescriptive based submissions to Fire Safety Department (FSD)

• Attend meetings with clients, consultants, inspectors and authorities

REQUIREMENTS

• Basic numerical and communication skills (written and verbal)

• Able to work in teams

• Attention to detail and iterations

• Candidate is expected to be autonomous under supervision and guidance

• Basic familiarity with Fire Code 2018, local code of practices and standards

• Preferred 2 years of experience in M&E consultancy firm

• Fresh graduates also welcome to apply

ACADEMIC QUALIFICATIONS

• Minimum B.Eng. (Mechanical) from a recognised institution.

• Sales Representative / Sales Engineer (Fire Pumps)
• Working hours: 8.30 am to 5.30 pm on weekdays and 8.30 am to 12.30 pm on Saturdays
• Work Schedule: 5.5 days work week during probation and upon confirmation: 5 days a week and one half Saturday a month
• Budget Up to $5,000 (Include $800 transport allowance + phone allowance)
• Entitled to AWS + Variable Bonus
• Office Near to Farrer Park MRT

Requirements:

1. Must be familiar with fire pump and the market for fire safety. In lieu of fire pump experience, must have at least experience with marketing of water pumps
2. Preferably have technical background in the relevant field at least at ITE level in specializations like electrical engineering, mechanical engineering, mechatronics etc.
3. Technicians / engineers with knowledge of the above product who keen to switch to sales role is welcome to apply.
4. Preferably have related sales experience and able to present to customer and consultant
5. Need to have at least class 3 driving licence and own vehicle.

Job Scopes

• Grow the fire pump portfolio
• Prepare quotations and tender submissions
• Attend to sales enquiries, sales support and site related matters
• Update management on the progress of projects
• Visit customers at their work place / office
• Any related ad-hoc duties
• Opportunity to handle the full spectrum of big projects

#SCR-carson-cheong

⭕ Cheong Kar Chun ⭕ Team Manager ⭕ R1980386

⭕ The Supreme HR Advisory ⭕ 14C7279

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment