Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Requirements

• Leading a Team of Tankage Design Engineers to execute the Tankage Design Engineering of the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650, Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII & Cryogenic Double Wall Tanks as per API 620 & API 625.
• Review & Checking of Tankage Design Documents such as Design Calculation for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification, Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME Sec VIII, AP 2000 and all Applicable Codes & Standards.
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies.
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay / approvals / resolution of open issues.
• Review and ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Coordination with PMC and Construction Coordination.
• Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works.
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Preparation of Technical Specification for Works and Technical Bid Evaluation
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Preparation of Foundation Loading Data.
• Generate 2D construction drawings and data sheet.
• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system, aluminium dome roof & etc. Preparing technical bid evaluation for item purchased. Checking vendor’s calculation & construction drawings.
• Checking of construction drawings. Preparation of bill of material for purchasing.
• Preparation of technical queries to client base on design deviation.
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Minimum 15 years of experience

Software Requirements

1) Autocad

2) Good proficiency in MS Excel, MS word

Code Knowledge

1) API 650/ API 620

2) ASME Section VIII D1 & D2

3) ASME Section II Part A & D

4) ASTM

5) NFPA

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

Duties and responsibilities:

Planning and organizing construction projects, including developing project timelines, budgets, and resource plans.

Ensuring that all construction work is carried out in compliance with building codes, safety regulations, and other legal requirements.

Managing project teams, including architects, contractors, and other stakeholders, to ensure that projects are completed on time and within budget.

Monitoring project progress and making adjustments as necessary to ensure that projects are completed on time and within budget.

Collaborating with architects and other stakeholders to develop project plans and specifications.

Developing and implementing quality control procedures to ensure that construction work meets the required quality standards.

Providing technical guidance and support to project teams, including architects, contractors, and other stakeholders.

Maintaining accurate project records and documentation.

Develop and manage project schedules, budgets, and resources

Coordinate with architects, engineers, and contractors to ensure project success

Review and approve project plans, specifications, and contracts

Ensure compliance with building codes, safety regulations, and environmental requirements

Monitor project progress and make adjustments as necessary

Communicate project status to stakeholders and senior management

Manage project risks and identify opportunities for improvement

Provide technical support to project team members

Ensure quality control and quality assurance for all project deliverables

Lead project meetings and facilitate communication among team members

Assist in the development of cost estimates

Assist the project team with site safety documentation and coordination

Assist the project team with closeout of the project

Assist project accountant with monthly subcontractor billings and pay applications

Assist project manager with assigned tasks

Requirement:

Bachelor's degree in Civil Engineering or related field

Minimum of 5 years of experience in construction project management

Strong knowledge of construction materials, methods, and regulations

Excellent communication and leadership skills

Ability to manage multiple projects simultaneously

Proficiency in project management software and tools

Experience in managing large-scale construction projects

Ability to read and interpret blueprints and construction plans

Knowledge of budgeting and financial management

Experience in managing and supervising construction teams

Strong problem-solving and decision-making skills

Today, Lonza is one of the world’s largest healthcare manufacturing organizations operating across five continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Lonza is currently looking to hire an Engineer 3, Validation. This remarkable opportunity allows you to join a world-class team, where your work will directly contribute to flawless biotech manufacturing processes. Our ambitious vision is to successfully implement innovative solutions that make a positive difference. If you have the determination to inspire change, this is the role for you.

Key responsibilities:

• Support Validation activities related to validation of facility, equipment utility, computer system, cleaning, and sterilization.
• Support day-to-day Validation activities in accordance with the approved Validation SOPs / Plan / Policies.
• Develop and complete Validation Protocols and Reports, including supporting site discrepancies and deviations investigation/closure.
• Work together with vendors and Engineering teams to evaluate new equipment or modifications. This will help develop protocols that prove the equipment meets project requirements.
• Participate in system design review to ensure compliance with user requirements, good engineering practice, validation requirements, and regulatory standards.
• Collaborate with other Engineering functions, End-User, and Quality team to ensure the Validation activities are completed as planned.
• Review Engineering documents associated with commissioning and validation activities.
• Participate in Site Validation Maintenance Program.
• Participate in commissioning activities when required.
• Support Change Implementation on site.
• Support Customer/Agency Audits and Inspections as required.
• Assist with implementation of department training requirements.
• Any other tasks as and when assigned by supervisor/manager.

Key requirements:

• Bachelor Degree / Diploma with exposure to the Biopharmaceutical industry.
• Meaningful work experience in Validation/Quality unit in the pharmaceutical/biotech industry.
• Familiarity with Regulatory requirements and local Codes & Standards (e.g., FDA, EMEA, GAMP, and ICHQ7).
• Fair knowledge and experience of the practical and theoretical requirement of validation program in a GMP facility.
• Good oral and written communication skills.
• Meticulous and Methodical.
• Phenomenal teammate, with a strong emphasis on safety, quality, and timelines.
• Able to operate independently with minimum supervision.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Responsibilities:

• To provide engineering support to the Project team from validation phase to project implementation

• To identify type of material and equipment requirement during validation phase.

• To involve in preparation and submission of engineering submittals.

• Programming of devices & creating and programming graphics in accordance with the project requirement.

• To assist in Test and Commissioning of system equipment.

• To assist in preparation and submission of operation and Maintenance Manuals.

• To provide Bill of Quantity for the projects.

• Any other duties as assigned by superior

• Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements:

• Diploma/ Degree in Engineering or Building Control in relevant field

• Min 1-2 years of relevant work experience

• Experience in PLC programming is added advantage

• Experience in handling energy management systems/ HVAC systems/ Chiller Plant systems/ Building Management Systems will be a plus

• Knowledge of IT networking and database programming, Function Block programming, Structured Language Programming or HTML5 programming will be of added advantage

• Knowledge of industrial system protocols like BACnet, Modbus, LONTalk

• Strong customer management and problem solving skills

• Able to work with the team and self-motivated

Job Description

• Oversee process design for process plant (Wastewater Treatment Plant, Water Treatment Plant, etc) including process simulation, mass balance, process flow diagram (PFD), P&ID, equipment layout, sizing calculation, control philosophy, process input for instrument/valve list, etc
• Provide process input and coordinate with other disciplines (including the BIM modelling team) for the design, installation and T&C work
• Oversee technical review of process equipment/system vendors’ proposal and submission during procurement, detailed design and installation stages, support the procurement and tender work
• Prepare the process submissions and resubmissions to project consultants and client according to project schedule and clear the submittal comments
• Manage the process equipment suppliers to meet the project schedule and quality requirements for design, installation and testing & commissioning
• Support on the testing and commissioning work

Requirements

• Minimum bachelor’s degree in chemical/environmental/mechanical engineering
• Minimum 4 Years’ experience in process design and engineering work, ideally in water/wastewater treatment projects (Including sludge treatment); For senior position, candidate must have at least 8 years of relevant experience
• Familiarity with local environmental regulations (e.g., PUB standards) and international design codes
• Strong understanding of biological, chemical, and physical treatment processes
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• Must have advanced computer literacy in commonly usedsoftware applications such as MS Office
• Knowledge in Naviswork and Bentley View Software will be an added advantage

Job Description :

• Making plans using detailed drawings
• Preparing estimates and budgets
• Creating accurate project specifications
• Designing engineering experiments
• Creating technical reports for customers
• Completing regulatory documents concerning safety issues
• Finishing projects on time and within budget
• Communicating with clients and co-workers about analysis results
• Conducting research and applying new knowledge.
• Designing processes, materials, tools, and systems.
• Making improvements to existing processes, materials, etc.
• Implementing solutions and designs.
• Training other engineering personnel.

Job Description

• Supervise and coordinate site installation works with in-house supervisor and foremen to ensure the project schedule is met
• Attending site coordinate meetings with main-con, consultants and other contractors
• Hands-on and technical assistance for ACMV system installation and troubleshooting on site
• Prepare material requisition for all ACMV equipment and materials
• Prepare work programme for ACMV works with material delivery and installation activities in accordance with the project programme
• Analyse, manage and track project costs against budget
• Carry out testing and commissioning, combined services testing for TOP/CSC
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards
• Participate in in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc
• Review 3D BIM model and ensure correct the installation details, compliance with design specifications and guidelines
• Participate in liaison with ACMV suppliers for quotation, carry out equipment selection, technical and commercial evaluation
• Prepare material submittals for ACMV system to the Consultant for approval
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials
• Participate in tender preparation for new projects

Requirements

• Min Diploma in Mechanical Engineering
• Min 3 years of relevant working experience in building construction industry, preferable in handling ACMV works
• Fresh graduate are welcomed to apply
• Proficient in AutoCAD and Revit
• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively
• Experience and relevant knowledge in ACMV calculations including heat load, pump size, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more Project Management
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage

Responsibilities

· To optimize airside equipment selection in order to minimize the cost and enhance winning probability for project tender

· To respond to customers in timely manner on changes in project tender requirement

· To process PO, SO, MSR, etc. into the system

· To enter order to factory with accuracy

· To ensure delivery schedule meets customer’s requirement to align with the sales forecast

· Any other duties as assigned from time to time

· Ensure all works carried out in accordance with the specified quality and EHS standards

Requirements

· Education levels should be Diploma in Engineering or equivalent

· At least 1-2 years of experience in relevant job scopes

· A team player, able to work in a team closely

· Meticulous and has eyes for details with pleasant characteristics

· Good communication skills

To be able to read and understand hydraulic schematic

To have hydraulic troubleshotting knowledge

To be able to work onsite independently

To work with a team of service engineer and technician

To know how to repair hydraulic cylinders, pump and hydraulic power unit

Simple design of hydraulic system is an advantage

COMPANY DESCRIPTION

Located on Jurong Island, the petrochemical hub of Singapore, SRC operates a refinery that is capable of processing 290,000 barrels of crude oil per day to produce fuel products and chemical feedstocks that are supplied to domestic markets and overseas export markets under the brand labels of its shareholders.

RESPONSIBILITIES

• Lead and supervise a group of Technicians/Technical Assistants and manage contractors in the execution of refinery maintenance activities.
• Implement reliability programs and develop maintenance procedures for instrumentation & electrical equipment to facilitate consistent execution of maintenance tasks.
• Investigate instrument & electrical equipment failures or malfunctions in order to identify root causes of problems as well as recommend and implement solutions.

• Degree in Electrical and Electronics Engineering.

• 2 years' relevant experience in oil refinery/petrochemical or related industries. Candidate without relevant experience may be considered for entry-level position.
• Knowledge of DCS, PLC and ESD systems is preferred.

The Software engineer is required to work as a member of the electronic system design team.

Require Skills:

- Knowledge in Linux OS , Python, Verilog, Synopsys

- Knowledge in Embedded system and Network communication

- Good skill in C/C++ programming

- Able to co-operate with system designer and hardware engineer.

- Good communication skill.

Responsibilities:

- Perform C/C++ software programming in embedded Linux system.

- Manage software evaluation and test.

- Write test plans and reports.

- Write driver for devices under embedded Linux OS

- To work on network / communication software coding.

- Software integration and report.

- Report to software chief engineer.

• Advanced CAD Skills – Proficiency in using advanced computer-aided design (CAD) software to create detailed 3D models and engineering drawings.
• Mechanical Engineering Knowledge – Strong understanding of mechanics, materials science, thermodynamics, and manufacturing processes.
• Problem-Solving – Ability to identify issues in design and find innovative solutions, considering both technical and cost constraints.
• Design for Manufacturability – Knowledge of how to design products that can be easily and cost-effectively manufactured.
• Project Management – Ability to lead and manage projects, including timelines, resources, and cross-functional collaboration.
• Finite Element Analysis – Experience with FEA tools to predict the behavior of mechanical components under various conditions.
• Communication Skills – Ability to clearly communicate technical ideas and collaborate with other teams, including engineers and manufacturers.
• Attention to Detail – A keen eye for detail to ensure designs are accurate and meet all specifications and safety standards.

Job Description :

• Design and implement Building Management Systems for commercial, industrial, or residential buildings.
• Analyze project requirements, propose technical solutions, and oversee the implementation of BMS systems.
• Develop and program control logic for to optimize building operations and energy efficiency.
• Troubleshoot and debug control systems to ensure optimal performance and integration.
• Configure and integrate high-level communications for devices, including sensors, controllers, actuators, and field devices.
• Ensure smooth communication between BMS components and external systems.
• Design, develop, and implement user-friendly BMS graphics and dashboards to provide operators with real-time insights into building systems.
• Ensure that graphics are intuitive and provide comprehensive control and monitoring features.
• Implement and maintain SCADA systems for large-scale monitoring and control of building operations.
• Integrate SCADA systems with existing BMS components to provide centralized control.
• Create and maintain detailed design, development, and implementation documents, including system architecture diagrams, control logic, and commissioning reports.
• Ensure that all design and development documents are up-to-date and accurate for future reference.
• Collaborate with other engineers, designers, and stakeholders to deliver high-quality solutions.
• Provide technical support during project implementation and post-installation phases.
• Assist in training building operators on the proper use and maintenance of the BMS system.

Requirement :

• Candidate must possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Hands on experience in DDCs and PLCs
• Knowledge in HVAC systems, SCADA software, Building Management systems would be an added advantage
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

We regret that only shortlisted candidate(s) will be contacted.

Purpose of the Role

The Engineer, Inspection has a critical role in ensuring that ARLANXEO's plant equipment is maintained to a high level of reliablity via the proper use of Maintainence and Engineering Standards and Codes. Her/his objective will be to ensure compliance with safety standards, local legislation, statutory requirements and regulations as well as Corporate guidelines while performing related duties and all other related works.

Job Description

• Manage and perform all static equipment inspection (pressured equipment, piping, PSV, etc).
• Manage PVMS to MOM CLA extension scheme and Steam/Air equipment RBI.
• Response to plant requirements to mechanical inspection for static and safety devices, Promptly and timely response to requests for assistance to meet execution team expectations
• Provide technical expertise to identify and make recommendation to solve static equipment problems either directly or through accurate identification of a problem and participating with functional engineering team in problem solving.
• Propose improvements of static equipment installation and utilize the LMS management of Change (MOC) process including proper documentation of the change.
• Lead in Static Equipment inspection scoping in major shutdown and turnaround.
• Support unscheduled/emergency or schedule plant shutdown/turnaround as required.
• Support Go-live, deployment and usage of IDMS and Future RBI initiatives.
• Liaise with maintenance planner, engineers and others supervisors to improve PM schedules.
• Supervise the contractor’s work in the facility or shop to guarantee safety and quality and reliability of work.
• Perform Root Cause Analysis of failures and develop counter measures to prevent future failing of Equipment.
• Develop work procedures in the area of responsibility.

Requirements

• Degree in Mechanical Engineering with at least 5 years’ of maintenance experience in Oil & Gas / Petrochemical or Chemicals industry.
• Industrial Certifications: API510, API570, AWS-CWI.
• Skilled in Materials selection, Material Degradation Mechanisms and NDT
• Working knowledge of API/ASNE/ASTM/TEMA.
• Familiar with PI, Microsoft Office, Project, Outlook and SAP systems.
• Self-confident and able to work independently with minimum supervision but also, a good team player.
• Good interpersonal, analytical, troubleshooting and problem solving skills.

Job Description:

- Design, develop, and improve sheet metal products and engineering processes

- Assist to create and review technical drawings, plans, and specifications using computer software

- Perform detailed documentation to track project development and design process

- Develop testing processes, and perform testing and validation of new designs

- Taking part in idea generation and improvement of existing products and machinery.

- Able to work with team members for the overall progress of the project and able to cope with fast paced learning environment - Prepare and perform unit beta testing and data recording

- Ability to be independent, innovative and creative

Skills and Academic Requirement:

- Bachelor's Degree/Diploma in Mechanical Engineering/Computer Engineering or in related field

- Solid Experience with AutoCAD and Solidworks

- Firm grasp of engineering concepts, and keen in designing mechanical systems and products

- Exceptional technical and problem-solving skills and reasoning ability

- Ability to communicate effectively and clearly

- Must be self-motivated and a great team player

We do not require recruitment agencies, please do not contact us. Thank you!

Job Responsibilities:

• Source and identify suppliers for direct/indirect materials/services to expand supplier base and for new project/production needs;
• Obtain quotes from newly source suppliers to provide costing and cost reduction;
• Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/service;
• Develop and negotiate favorably supply agreement with suppliers;
• Work with Engineering/Unit Sales to analysis Sales Contract’s scope of supply and provided Sales Contract BOM Cost to Management;
• Support in providing Project Costing;
• Other ad-hoc duties as assigned.

Requirements:

• Diploma or Degree in Mechanical Engineer/HVAC in or equivalent;
• Proficiency in both written and spoken in English and Mandarin as to liaise with relevant Mandarin speaking counterparts;
• Excellent organization problem solving and negotiation skills.

Job Purpose:

Service engineer to carry out preventive and corrective maintenance of machinery, industrial vehicles, heavy machinery and waste collection equipment.

Opportunity to develop as a professional within heavy duty machinery sector through continuous training programmes to ensure the necessary technical and skills.

Main Duties and Responsibilities:

• Preparation of necessary material and stock control
• Diagnosis of breakdowns, either electric, mechanic or hydraulic.
• Interpretation of electrical and hydraulic diagrams to apply correct solutions
• Inspection and repair of electrical, mechanical and hydraulic breakdowns and analyze possible malfunctions of machinery.
• Preparation of needs of materials and stock control

Accountabilities & Commitments Required

• Able to attend breakdowns after office hours and weekends
• Commitment to join a growing company and take full responsibility to be part of a team

Education / Qualifications

• Technical education
• Fluent in English
• Other laguanges

Job-related skills & abilities

• Class 3 driving licence
• Analytical Skills for problem-solving

Other requirements

• Customer Satisfaction, Aftersales, and Customer Service skills
• Previous experience in a similar role in the waste management industry will be a plus point

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.

Job Description & Requirements

· Inspecting electrical components during and after the product installation

· The Engineer will ensure clarity and alignment for all team members

• Testing IED NUMERICAL Relays for problems and proposing solutions.
• Familiar in Goose configuration
• IEC61850 Configuration in siemens, ABB, Alstom and Schneider relays.
• Modbus RTU, TCP Communication verification.
• Overall commissioning knowledge in Power system and SAS
• Test equipment such as SFRA, Omicron CPC, CTA, CMC and Transformer testing kits.
• Knowledge in Insulation Oil DGA, BDV.

· Conducts tests and experiments requiring modifications in test setups or procedures subjective judgments in measurement

· Assesses requirements and develops new measurement techniques and approaches related to electrical, electronic and microwave measurement areas

· Establishes test and performance criteria and prescribes calibration approaches, tests, equipment and servicing requirements necessary to ensure measurement traceability

. Must be known of Testing and commissioning Electrical equipment, Switchgear equipment and power transformer. Proficient in testing and commissioning electrical substation, Steel plant and power plant. Set up trouble shooting control and protection circuits like Transformer, Circuit Breaker, CT, PT and switchgear wiring. Sometimes need to work overnight for shutdown maintenance job.

1. Must have Min-7 years experience in testing of CT, PT, relay and transformers

2. Must have knowledge in power system Schematics and SLD`s

3. Must have experience in Testing of GIS panels/ Breakers

4. Coordination with OEM for testing and troubleshooting the equipments.

5. knowledge in Basic configuration and testing of Relays.

6. Experience in handling testing equipment like primary and secondary test sets.

Responsibilities/Requirements:-

• Resourceful, knowledgeable in solar energy market and aware of related events and news in exploring business opportunities
• Prepare and deliver presentations explaining technical products on Solar/EV/BESS to existing and prospective customers
• Liaise with customers, the sales & technical teams, to determine product needs and system requirements
• Provide customers with product sales support
• Build up and nurture good networking in related industries
• Screen and identify potential partners
• Drafting, review and proven ability to negotiate contracts
• Possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical or Electrical Power or Clean Energy) or equivalent
• At least 3 Years of working experience in the related field is required
• Experience in Clean Energy, Sustainable Energy, Solar Energy
• Good interpersonal, communication & presentation skills
• IT Savvy
• Possess own vehicle

Responsibilities/Requirements:-

• Resourceful, knowledgeable in solar energy market and aware of related events and news in exploring business opportunities
• Prepare and deliver presentations explaining technical products on Solar/EV/BESS to existing and prospective customers
• Liaise with customers, the sales & technical teams, to determine product needs and system requirements
• Provide customers with product sales support
• Build up and nurture good networking in related industries
• Screen and identify potential partners
• Drafting, review and proven ability to negotiate contracts
• Possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Electrical or Electrical Power or Clean Energy) or equivalent
• At least 5 Years of working experience in the related field is required
• Experience in Clean Energy, Sustainable Energy, Solar Energy
• Good interpersonal, communication & presentation skills
• IT Savvy
• Possess own vehicle

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

Safety

• Engineer must adhere to all the HSE principles and WI during the work.

Quality

• Remember all WI, SOP, and Quality Policy. Work with related internal departments (such as Production, Equipment, Quality, Technology) and external CM suppliers to resolves wafer blocks/cells/modules quality issues and implement required decisions made by internal management at the external supplier sites.
• Ensure no quality issues during qualification/certification and proper change management implementation phase.

Delivery

• Possess excellent project management skills by establishing schedules, coordinating with required resources both within the organization or CM suppliers, projecting cost of qualifications/certification projects and risks identification to implement and execute the required projects. Responsible to generate bill of materials (BOMs) and Design/Engineering change, product transfer to internal/external lines and lead in DFMEA/PFMEA for product change.
• Ability to create and maintain excellent internal/external customer supplier relationship through excellent interpersonal and communication skills.
• The Key Performance indicators are the results and prompt project schedule control.

Cost

• Initiate and lead cost-reduction projects relating to cost reduction.
• These types of projects will relate to man, method, machine, and materials.
• In cases where projects are not initiated, participation towards such project will also be required.
• The Key Performance Indicator is CM product performance in addition to the CM product pricing.

Continuous Improvement

• Initiate and lead projects relating to cell efficiency and module power improvement activities.
• To run and execute projects base on RPDM process flow.
• Engineer will have the chance to research on new processes and materials at the suppliers site to be implemented into our internal production environment.

Others

• Perform other duties as assigned. Duties will vary according to the degree of difficulties and involvement of the specific targets set in the department.
• Develop and maintain proper job methods, work instructions and change management.
• Regular reporting of project status.
• Lead trouble-shooting and root cause analysis efforts to resolve issues.

• Degree in Electrical/Electronics/Mechanical/ Materials Engineering.
• Working experience in Solar/Semiconductors/Electronics manufacturing industries will be an advantage.
• Knowledge in Semiconductor/Solar cell and module processes.
• Knowledge in FMEA, DFMEA, DOE, Fish-Bone Analysis.
• Strong technical analysis competency with the use of analytical tools like JMP, Mini-Tab for troubleshooting and data-mining.
• Ability to work under stress in a fast paced environment with self motivation.
• Strong organization and project management skills.
• Ability to communicate effectively with all levels (PS to Management) within the organization.
• Ability to write and speak in English and one other language, preferably Mandarin for liasion with Taiwanese and China suppliers/customers.
• Dynamic & committed with proactive working attitude.
• Ability to initiate without being asked.
• Challenging spirit to improve current conditions.
• Highly effective personal skills communication and organization.
• Good Team player.

Additional Advantageous Skills

• Ability to perform software simulations using SPICE or MATLAB.
• Electrical characterization and physical characterization/ Failure Analysis tools for systematic troubleshooting and improvement.
• Characterization tools/technique competency preferred include: IQE tester, Spectrophotometer, Ellipsometer, Semilab WT-2000, Sinton WCT-1200, Corescan, Photoluminescence Technique and Electroluminescence Technique.

Job Responsibilities:

• Supervise all engineering works, restricted activities civil, architectural, electrical and mechanical works carried out by the Contractors/SWCs etc
• Liaise with QP(s) for technical issues and coordinate the site activities with subcontractors
• Overall project planning, scheduling, monitoring and updating to meet project completion targets
• Daily site activities planning, preparing work breakdown, daily site operations, site coordination, monitoring and report work progress.
• Attend all meetings with Stakeholders such as Authorities, Subcontractors, etc
• Prepare Monthly Progress Report
• Ensure site safety and compliance to Authorities' requirements

Requirements:

• Candidate must possess at least Bachelor's Degree in Civil Engineering Recognised by the PE Board
• At least 5 Year(s) of working experience in construction of civil and structures for LTA/MRT Projects
• Availability for Night Shifts: Candidates must be able to work during night shifts.
• Required Skill(s): Registered engineer
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent