• Managing the design of utilities diversion route, supporting structure and other required structure.
• Coordinate with authorities to facilitate the work progress such as PUB, SPPG, LTA etc.
• Engage and liaise with approved subcontractor for any services diversion works.
• Approval request submission to relevant authorities for services diversion and traffic diversion at site
• Incorporate utilities diversion plan to construction schedule.
• Planning for reinstatement
• Preparation of tender for subcontractor of utility
• Preparation of CIAR(construction impact assessment report) for PUB/LTA with subcontractor
• Establishment of overall utility plan including short & long term
• Management of each activity for utility work on site
• Preparation & coordination with subcontractor for NCE(notification for commencement of earthworks)
• Approval for PTD(permit to dig) related utilities
• Pegging and demarcation for utilities on site
• Regular inspection / petrol / visual check for existing utility
• Establishment of emergency plan for utility
• To check daily, weekly and monthly progress report before submission
• Must be able to work 5.5 days per week
• Bachelor Degree in Civil Engineering or equivalent
• Minimum 2 years engineering experience in large scale and complex project

Job Description

• To assist engineering supervisor in the review of project orders relevant specification and/or data sheets
• Act as secondary check and make recommendation based on common industrial engineering practice, where necessary
• To aid supervisor in providing and implementing cost effective and best engineering solutions for project in order to stay competitive
• To support sales, project and production team on various aspects of technical/engineering matters
• To prepare and maintain accurate engineering documents, i.e. general assembly drawing with BOM, control schematic drawing, test procedure, data sheet and engineering library
• Manage engineering change function and ensure engineering documents are updated accordingly
• To support and assist engineering supervisor in providing sound engineering practice and engineering calculation where applicable in a timely manner top meet project timeline
• Providing field support for the customers to resolve after sales / any technical issues
• Travel along with Technicians to installation base and sites if situation arises
• To act as the main administrator and to maintain the SAP item master data
• To assist engineering supervisor and manager to drive the department’s improvement programs and/or process efficiency initiatives
• Perform additional related duties as requested or required

Job Requirement

• Bachelor degree / Diploma in Mechanical/Instrumentation or equivalent
• 1-2 years experience in either marine, oil & gas or automation industry is preferred
• Possess knowledge in instrumentation and control system
• Conversant with all industrial standards related to valve automation
• Able to read and interpret drawings, specifications and technical documents
• Knowledge of Autocad 2D/3D or drafting software and SAP will be an advantage
• Strong verbal and written communication skills
• Fresh graduates are welcome to apply for this entry level position

Job Summary

Manage the company’s corporate and internal communications, branding and corporate social responsibilities portfolios.

For corporate communications, your main responsibilities include formulating internal and external communications strategies, developing relevant communications materials, managing both traditional and digital communication channels and organizing large scale corporate events and campaigns. You should also effectively liaise with government officials to achieve desired outcomes.

For internal communications, your main responsibilities include translating corporate topics into a comprehensive communication strategy, driving understanding of key strategic initiatives, establishing organisational messages and engaging employees and tracking communication efforts.

Job Responsibilities

Corporate Communications

1. Develop and implement comprehensive corporate communications strategies to promote the company’s brand, mission and values, including crisis and reputation management.

2. Establish and formalize communications policies and procedures, ensuring alignment across all levels of the organization.

3. Manage the company’s public relations efforts, including media relations, press releases and proactive outreach.

4. Engage with internal and external sstakeholders, including ggovernment authorities, business leaders and customers to build and maintain positive relationships.

5. Enhance the company’s brand identity through consistent messaging across all platforms and communication channels.

6. Track and evaluate the effectiveness of communications strategies and initiatives, providing reports to management as appropriate.

7. Liaise effectively with government entities and manage governmental processes (such as obtaining permits, securing funding) so as to build strategic partnerships and advocate organization’s goals.

Internal Communications & CSR

8. Develop and drive employee communications for Nippon Paint Singapore

9. Continuously create new and improved communication methods for the company.

10. Translate key corporate topics into an effective communication strategy for implementation

11. Proactively engage with all employees and represent the company In corporate communication and related events.

12. Plan and execute dynamic volunteering events and special projects for various social causes under the Nippon Paint ESG program.

Requirements

· Degree in Communications, Public Relations, Marketing, or related field.

· Preferably with a minimum of 8 years of work experience in corporate communications in a fast-paced environment.

· Exceptional written and verbal communication skills, with an ability to communicate complex ideas clearly and concisely.

· Able to work independently and collaboratively in a team-oriented environment.

· Strong organizational and project management skills, with the ability to prioritize multiple tasks and deadlines.

· Hands on with a willingness to manage execution details in addition to strategy development.

· Fast in digital trends and tools.

QEHS Responsibility

Implement and abide by requirements set out in the Company’s Quality, Environmental, Health and Safety Management System, ISO and OHSAS standards and applicable legal and other requirements.

Responsibilities:

- Systems design and selection of equipment instrumentation and controls.

- Reviewing of customers’ specifications requirement and drawings.

- Define specifications and scope of work to contractors.

- Startup, testing, commissioning and troubleshooting of plants.

- Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control. - Responsible for Single Line Drawing, Control Schematic drawings. - Develop engineering capabilities and work with sales team on project proposal and bidding.

- Reviewing of customers' specifications and drawings.

- Execution of projects.

- Preparation of tender activities.

Requirements:

- Recognised degree by PE Board in Electrical / Instrumentation Engineering.

- Minimum 3 years relevant working experience, preferably with experiences in FEED of LV/MV switchboards, MCC, MCB, Control Panels etc and in Water & Waste Water industries.

- Knowledge in Instrumentation and Control.

- Able to read & understand single line diagram and generate Bill of Materials from single line diagram.

- Knowledge on control, schematics, motor controls and materials take-off.

- Proficient in AutoCAD, Microsoft Office.

- Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.

- Those with relevant project management, process design, and service & maintenance experience will be an added advantage.

*** Please apply with detail resume, stating present and expected salary, date of availability and/or notice period required.

To ensure work is construct in accordance with contract and drawings.

Planning of Architectural Works and micro scheduling with other disciplines.

Liaise with main-contractors, suppliers, etc. Procurement and Monitoring of Architectural related materials.

*Coordinate, review and verify drawings including owner & maincontractor’s drawings to ensure compliance with design specifications and guidelines.

*Able to work in a fast-paced environment and both independently and in a team.

Requirements

*Experienced in AutoCAD 3D, and able to understand architectural or structural drawings

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

• Ensure all architectural works are carried out as per approved architectural drawings and specifications and all interface details with SWCs works are carried out as per CCSM and Reflected Ceiling Plans.
• Plan, manage and maintain the BIM data in compliance with project requirements
• Create and maintain the project template files to ensure standards
• Coordinate with other departments and engineers to manage and resolve clashes
• Assist the project manager to plan, organize, implement, coordinate and control the construction of architectural works and completed within scheduled time
• Coordinated, monitored and liaise with sub-contractors' progress
• Prepare Transmittal on drawings for submission or issuance to sub-contractors
• Review and revise the current revision status
• Compiling of As-built drawing upon project completion
• Minor coordination of Architectural / Structural / M&E drawings
• Plan and monitored of full process from sample submission to approval status up to construction period.
• Detailing and documentation of working drawing, material estimation and submissions
• Check on-site to ensure that architectural works are carried out according to the construction drawings
• Any other duties assigned

Job Requirement:

• Preferably with a Degree in Architectural.
• Minimum 5 years of experience after tertiary education in a relevant architectural field in the construction supervision of architectural works for projects of similar scale and complexity in context.
• Having experience in the A&A would be a bonus and advantageous.
• Have experience working with main contractors
• Willing to work in the site office.

• Manage project scope, cost, schedule and quality of work from site preparation stage till project completion and handover to clients
• Review contract/ tender agreement and highlight the compliances or deviations of the terms & conditions and technical specifications
• Liaise with agencies, clients and manage sub-contractors
• Ensure work is carried out according to approved plans, quality standard procedure, safety requirements and in a timely manner
• Planning, scheduling and implementing project maintenance works
• Manage cost, work measurement and collection of performance data
• Ensure project technical issues are monitored and resolved

Requirements:-

• Degree or Diploma in Electrical Engineering (Power Engineering)
• Technically skilled and knowledgeable in electrical works & installation
• Relevant experience in sustainable energy projects such as Photovoltaic, Battery Energy Storage and Electrical Vehicle Charging System
• Min 3 years of project management experience
• Leadership skill and able to lead a project team
• Good communication skill and able to interact with all levels
• Possess own vehicle

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. Successful candidates will be involved in a project that is related to 3D Animation.

Key Responsibilities:

• Design and implement user interfaces for interactive 3D animation tools and systems.
• Build dynamic web applications using modern front-end frameworks.
• Collaborate with back-end developers to integrate front-end solutions with server-side logic.
• Optimize web applications for maximum speed and scalability.
• Develop and maintain RESTful APIs for efficient communication between components.
• Contribute to database design, development, and optimization for project needs.
• Utilize containerization technologies like Docker for application deployment and scaling.

Job Requirements:

• Bachelor’s degree in relevant disciplines.
• Proficiency in HTML5, CSS3, and JavaScript.
• Hands-on experience with Vue.js or similar front-end frameworks.
• Familiarity with the Django back-end framework for server-side development.
• Strong knowledge of database design and optimization.
• Experience in designing and developing RESTful APIs.
• Working knowledge of containerization technologies such as Docker.
• Ability to work collaboratively within a multidisciplinary team and deliver high-quality code.

We regret that only shortlisted candidates will be notified.

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Responsible for management of various PLC programs and SCADAs, EMS, BMS, Various Software, Hardware, VFDs at site, Program backup and recovery as & when required. Change management etc.

· Planning & execution of all new and retrofit manufacturing equipment, packaging line related projects for the site.

· Ensuring the best available technologies are incorporated by design.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Delivering the project within the budget and timeline approved.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirements to ensure efficient, reliable, and uninterrupted operation.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure the site manufacturing equipment are kept to the highest standards for cGMP requirements, including Sterlie filling, Granulation, Compression, Packaging etc.

· Responsible for development SOPs and quality standard for site with following of site QMS procedures.

· Ensure to meet the required regulatory requirements (e.g. HSA, FDA etc.) and keep site audit ready for all the time.

· Responsible for managing a team of vendors / contractors.

· To assist on any ah-hoc duties that have been assigned / task by the immediate supervisor.

Education:

· Bachelor or Master Degree in Electrical/ Instrumentation / Automation / Mechatronics engineering or a related field.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in PLC program (ladders, function block, OPC code…etc)

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

Responsibilities:

• Preparation of tender activities
• Perform process design and costing (CAPEX & OPEX)
• Prepare technical proposal c/w PFD, P & ID
• Tender clarification & presentation (supporting sales activities)
• Assisting project team on technical matters (process design & calculation and sequence of operation)
• Assist to source new products technical evaluation

Requirements:

• Degree in Chemical Engineering / Mechanical engineering / Equivalent
• Strong technical knowledge (i.e Process Design and Calculation) in Membrane (MF/UF/RO/MBR), Ion Exchange, and pretreatment processes (coagulation / flocculation, sedimentation, clarification, filtration)
• 3 years relevant working experience in Water & Waste Water Treatment industries is preferable. Fresh graduate can also apply.
• Those with relevant project management / plant testing & commissioning experience will be an added advantage
• Self-starter, highly motivated, driven by excellence and having an eye for details
• Process the mental and physical staminal to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / visions
• Proficiency using Microsoft Office and Microsoft Project
• An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate.

Interested applicants, please apply directly to the email below, with a detailed resume, stating present and expected salary, date of availability and/or notice period required.

Please indicate in your application the position applied.

We regret to inform that only shortlisted candidates will be notified.

MEMIONTEC PTE LTD
20 Woodlands Link #04-30/31

Woodlands East Industrial Estate
Singapore 738733

We are seeking a Research Engineer to join a university-level research centre collaborating with industry. Successful candidates will be involved in a project that is related to 3D Animation.

Key Responsibilities:

• Design and implement user interfaces for interactive 3D animation tools and systems.
• Build dynamic web applications using modern front-end frameworks.
• Collaborate with back-end developers to integrate front-end solutions with server-side logic.
• Optimize web applications for maximum speed and scalability.
• Develop and maintain RESTful APIs for efficient communication between components.
• Contribute to database design, development, and optimization for project needs.
• Utilize containerization technologies like Docker for application deployment and scaling.

Job Requirements:

• Bachelor’s degree in relevant disciplines.
• Proficiency in HTML5, CSS3, and JavaScript.
• Hands-on experience with Vue.js or similar front-end frameworks.
• Familiarity with the Django back-end framework for server-side development.
• Strong knowledge of database design and optimization.
• Experience in designing and developing RESTful APIs.
• Working knowledge of containerization technologies such as Docker.
• Ability to work collaboratively within a multidisciplinary team and deliver high-quality code.

We regret that only shortlisted candidates will be notified.

About the Company:

The company started with civil engineering contracts and progressively expanded into addition and alteration, demolition, civil engineering, and general building works.

Job Responsibilities:

• Assist the Project Manager in overseeing the complete lifecycle of projects, including planning, coordination, execution, and control.
• Assist in building and guiding project teams, providing direction, and support to achieve project goals.
• Assign tasks and responsibilities to team members, ensuring effective resource allocation.
• Develop and maintain project timelines and regularly monitor progress.
• Assist in generating reports that outline project status, issues, and proposed solutions.
• Address conflicts and resolve issues within the project team.
• Analyze and troubleshoot problem areas, adjusting strategies as required.
• Mentor and motivate team members, fostering a positive and accountable work environment.
• Undertake additional tasks and assignments as they arise.

Job Requirements:

• Hold a Diploma/Degree in Civil Engineering.
• Possess a minimum of 2 years of experience in the civil engineering industry.
• Exhibit strong communication skills.
• Have relevant on-site experience.
• Possess excellent problem-solving abilities.
• Can work effectively under pressure and take initiative.

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

KEY DUTIES AND RESPONSIBILITES:

· Develop detailed project plans, including scope, goals, deliverables, resource allocation, timelines, and budgets.

· Planning and follow up all new and retrofit projects of Sterile filling for the manufacturing site

· Responsible for development of SOPs, quality standard, development, and execution of Qualification protocols with following site QMS procedures.

· Responsible for managing a team of vendors / contractors.

· Techno commercial evaluations of consultants, vendors, and contractors.

· Coordinating with statutory authorities for relevant approvals.

· Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.

· Ensuring best available technologies are incorporated by design.

· Delivering the project within the budget and timeline approved.

· Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.

· Ensure to maintain the highest standards for cGMP requirements for the manufacturing site.

· Ensure to meet required the regulatory requirements (e.g. HSA, FDA etc.) and keep the site audit ready all the time.

· Achieve financial objectives through efficient project management.
Qualifications

Education:

· Bachelor’s / master’s degree in mechanical engineering or equivalent.

· Project management certification: PMP or PRINCE2

Experience:

· Proficient / experienced in the Microsoft project software and project tracking.

· Proficient / experienced in AutoCAD.

· 3~5 years of experience in the green field / brown field area project management.

· Capability handles the pharma project from USD 2-5 million.

Soft Skills:

· Strong problem-solving abilities and analytical thinking.

· Excellent communication and teamwork skills.

· Ability to manage multiple projects and meet deadlines.

· Good investigation and report writing skills.

· Knowledge of industry standards and regulations.(GMP, PICs)

TO APPLY:

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume.

· Work experiences and job responsibilities.

· Current and Expected salary

· Reason for leaving.

· Date of availability

· Education background

We regret that only shortlisted candidates will be contacted.

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

As an Associate Process Engineer, you will work on monitoring and sustaining process / SPC to ensure quality of products are meeting specification.

Your Job:

• Analyze SPC charts using SPACE
• Respond to all PR rules and follow CAS correctly.
• Work on basic annotation and achieve quality troubleshooting rate for SPC OOC points.
• Monitor all qualified processes using SPC and other statistical tools.
• Perform shift duties (12-hours shift) to support the running of production in the Module and ensure that integrity of the tools is in place to run the process.
• Assist Engineers in the qualification and fine tune of new processes and new equipment for production.
• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements, and programs

Required Qualifications:

• Diploma in any Engineering streams
• Experience in wokring with Electronics / Manufacturing sectors
• 1-2 years of experience in working with SPC tools
• Good understanding of the SPACE
• Willingness to work in weekend / rotational shifts

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

Key Responsibilities:

1. Technical Support:
   • Provide first- and second-line support for hardware and software Installation.
   • Troubleshoot desktop, laptop, and peripheral problems to ensure minimal downtime.
   • Respond to service requests and incidents in a timely manner.
2. Hardware & Software Management:
   • Install, configure, and maintain desktop and laptop operating systems (Windows/Mac/Linux).
   • Install and update software applications and drivers.
   • Set up and maintain user accounts and permissions.
3. Asset Management:
   • Manage IT inventory, including desktops, laptops, and peripherals.
   • Ensure proper documentation and tracking of IT assets.
4. Network Support:
   • Assist with basic network troubleshooting (e.g., connectivity, printer access).
   • Support VPN, wireless, and LAN/WAN configurations as required.
5. Collaboration & Training:
   • Work closely with other IT teams to resolve escalated issues.
   • Provide user training for new hardware or software implementations.
6. Security & Compliance:
   • Ensure devices are compliant with company security policies and standards.
   • Conduct regular updates and patches to maintain system integrity.

Key Requirements:

Education & Experience:

• Diploma in Computer Science, Information Technology, or a related field (preferred).
• Proven experience (2+ years) in a similar desktop support or IT helpdesk role.

Technical Skills:

• Proficiency in Windows and macOS operating systems.
• Familiarity with Active Directory, Group Policy, and Office 365.
• Knowledge of basic networking concepts (DNS, DHCP, TCP/IP).
• Experience with remote support tools like TeamViewer, AnyDesk, or SCCM.

Responsibilities:

• Develop membrane products, systems and processes for the applications in separation processes, e.g. Nano-filtration, Ultra-filtration etc.
• Execute product development process from bench-scale through commercialization, and continue technical support throughout production.
• Plan and execute lab, pilot and field tests.
• Interact with customers/clients/collaborators to identify new needs and initiate solutions.
• Work with R&D and business units to screen ideas/technologies and conceive technology solutions.
• Work with internal resources, suppliers and development partners to execute projects.
• Cross department and subsidiary or sister companies’ coordination and communication to ensure aligned execution of pilot test project.
• Document project work and report out to management.
• Close working with production team to understand existing product characteristics and explore for any potential application.
• Familiarize with the existing production process and support quality team on documentation preparation.

Requirements:

• Minimum Diploma/ Degree in Environmental Engineering, Chemical Engineering, or equivalent
• Proven strong team player with good interpersonal and communication skills
• Experience in membrane development, pilot testing, or water and wastewater treatment is highly desirable
• Microsoft words, excels, power point literate
• Fresh graduates may apply

General Overview

The position is part of the site Instrument, control and electrical (ICE) team that provides maintenance and technical support to the Operations and Project teams in the LNG Terminal. The incumbent is responsible for establishing, reviewing and overseeing the integrity of the on-stream continuous analyzers and quality management in the Terminal.

Roles and ResponsibilIties

The incumbent shall be responsible for tasks and duties such as but not limited to the following:

• Maintenance of process on-stream and laboratory analyzers
• Work on continuous improvement projects to resolve any issues related to correct functioning of process stream analyzers
• Develop and update standard operating procedures for all process stream analyzers, sampling and laboratory equipment
• Manage and oversee the laboratory operations with laboratory service provider
• Upkeep laboratory related documents such as safety, quality manuals, standard operating procedures (SOP) and laboratory logbooks delivered by vendor
• Addressing customers’ queries related to measurement and quality management

Work Experience

• 5 to 8 years of experience in maintenance of various process analyzers such as Gas Chromatography, Wobbe index analyser, HydroCarbon Dewpoint analyzer, THT analyzer, Auto-sampler etc.
• Previous experience in design, installation, commissioning, maintenance of instrumentation and analyzer systems in oil and gas/petrochemical industry/Analyzer vendor is required
• Knowledge in ISO17025 - general requirements for the competence of testing and calibration laboratories.

Education & Requirement

• Bachelor’s degree in engineering; preferably in Chemical/Electrical/Electronic or equivalent.
• In addition, the successful candidate should possess the following personal attributes:

1. Strong knowledge of various type of analyzers and sampling systems
2. Highly analytical and meticulous.
3. A team player and possess strong interpersonal, written and verbal communication skills
4. Excellent negotiating and influencing skills to manage external and internal stakeholders and third parties

Roles & Responsibilities

The Lead Resident Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste

treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the ICA project implementation at site.
• Assist Chief Resident Engineer in daily supervision and coordination duties for ICA discipline.
• Project delivery planning including time and manpower scheduling.
• Source and interview for Resident Engineers and Resident Technical Officers for ICA discipline
• Strong capability of specification capability for all ICA related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.
• Enforce Specifications, International Standards, Singapore Standards and good practices
• In depth of understanding for automation package for contract implementation of automation systems for WtE project.
• Contracts management of ICA discipline for the WtE project
• Review the EICA submittals from Contractors for Process like Waste Reception system,
• Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services,
• Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC, EMIS,PFMS etc.
• Essential understanding of P&ID of process engineering
• Liase with Engineering Manager and the Project Technical Specialists on the review and approval of design submissions including calculations and drawings
• Engage in Technical discussion EICA related issues with contractor and client
• Attend site meetings and resolve technical issues with Contractors
• Define Inspection and Special testing requirement and ensure coordination of those efforts on all contracts
• Ensure the documentation fully complies with the specifications and standards
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation in FAT of automation equipment, DCS, PMS, PLC and RIO
• Provide Technical support in Testing and Commissioning of the plant

Requirements:

• Degree in Electrical / Electronic/Instrumentation & Control Engineering recognized by the Professional Engineers Board
• Registered as Resident Engineer with the Joint Accreditation Committee of the
• Institution of Engineers Singapore / Association of Consulting Engineers Singapore
• At least 10 years of relevant experience in design and construction of large Waste to
• Energy (WTE) project or waste/water management projects in Singapore, particularly experience in power plant or WTE processes.

Intro to GF

GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF

Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Introduction:

We are expanding our Fab Operations and are looking for Process Engineers, in this role you will sustain and improve process / SPC to meet quality, cost, productivity requirements. Process improvement to eliminate inherent process weakness to achieve company goals.

Your Job:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance.
• Do proper annotation to maintain quality troubleshooting rate for SPC OOC.
• Understand Cp and Cpk indices.
• Monitor critical SPC charts daily.
• Perform process window study and provide improvement plan to reduce OOC and improve CPK.
• Review ESPC charts using SPACE.
• Know all the rules for ESPC.
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Raise PCRB and understand the requirement for PCRB opening, follow through with qual plan, analyze data using required software and CR closure.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues.
• Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline.
• Work closely with Equipment Engineer on new equipment acceptance.

Required Qualifications:

• Degree in electrical / electronic / Mechanical / Microelectronics / Chemical process Engineering / Chemistry / Physics
• 2 years of working experience in electrical / electronics industry
• Team Player
• Good ownership and accountability
• Good verbal and written communication skills
• Flexible and able to support overtime
• Self motivated, meticulous, and discipline
• Perform Normal / Swing Shift (or 12-hour rotating shift if required)

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

• Manage project scope, cost, schedule and quality of work from site preparation stage till project completion and handover to clients
• Review contract/ tender agreement and highlight the compliances or deviations of the terms & conditions and technical specifications
• Liaise with agencies, clients and manage sub-contractors
• Ensure work is carried out according to approved plans, quality standard procedure, safety requirements and in a timely manner
• Planning, scheduling and implementing project maintenance works
• Manage cost, work measurement and collection of performance data
• Ensure Project technical issues are monitored and resolved

Requirements:-

• Degree or Diploma in Electrical Engineering (Power Engineering)
• Technically skilled and knowledgeable in electrical works & installation
• Relevant experience in sustainable energy projects such as Photovoltaic, Battery Energy Storage and Electrical Vehicle Charging System
• Min 3 years of project management experience
• Leadership skill and able to lead a project team
• Good communication skill and able to interact with all levels
• Possess own vehicle

• Provides supervision to shipyard team and foremen
• Develops departmental plans, including production and/or organizational priorities and establish shipyard fabrication activities
• Directs activities in areas of safety and personnel, production, scheduling, material handling and quality and ensures compliance with all Safety, Quality, Company and Regulatory directives in conjunction with Manager, HSSEQ
• Review and interpret designs, drawings & specifications, recommend changes to plans and specifications to meet actual vessel conditions
• Directs and coordinates shipyard operations within company policies and procedures
• Responsible and accountable for the performance of craft supervisors, technicians, and line staff for safety, quality and scheduling
• Responsible for providing the quantity and quality of workers to meet schedule With assistance of Senior Manager, trains assigned craft supervisors in safety, cost control, job skills, quality and scheduling
• Directs all phases of steel fabrication, assembly and erection, piping fabrication and installation, outfitting including the work performed by outside contractors
• Monitors the performance of assigned supervisors
• In conjunction with the Senior Manager, maintains appropriate interface and relations with customers, paying detailed attention to site requirements
• Translates company strategies into tactical plans. Creates and prioritizes necessary resources and steps required to accomplish goals on time
• Establishes all shift production schedules
• Establishes and maintains shipyard production goals to ensure production schedules are met
• Schedules and conducts shipyard meetings in conjunction with Manager and Workforce
• Ensures product quality control goals are met and maintained for shipyard
• Maintains a clean and safe work site

The Process Engineer will spearhead the design, implementation, and optimization of wastewater treatment processes within our projects. This role collaborating with various departments, and implementing cutting-edge technologies to advance project goals. This role requires a deep understanding of chemical, physical, and biological treatment methods, strong project management skills, and a commitment to environmental sustainability.

Roles & Responsibilities:

• Develop detailed process designs for complex wastewater treatment projects.
• Lead pilot studies and data collection efforts to validate process concepts.
• Create process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs).
• Perform detailed calculations related to plant process design and prepare system operation & control philosophy.
• Work closely with multiple disciplines to ensure quality and competitive proposals are developed and delivered on time.
• Support Business Development on technical presentations and/or meetings with potential or existing clients.
• Participate in preparing the design specification, Bill of Quantity (BQ), and Request for Quotation (RFQ) and assist in selecting equipment and components.
• Assist in project implementation, including process-related document preparation and technical clarification with client.
• Participate in testing and commissioning work.
• Any other works as instructed by the company management.

The Service Engineer is responsible for providing ocean going vessels with on-site and remote technical assistance regarding water and chemical treatment asset protection program adherence, energy management programs, cleaning solutions, welding, refrigeration and sealing products and installation services and repair of equipment. The Service Engineer will investigate and approve operational quality of onboard programs, processes and system equipment and instruct vessel crew in the operation and maintenance of the programs and systems. Serves as company liaison with customer on administrative and technical matters for assigned projects.

Principal Duties and Responsibilities:

• Analyze current application of Company programs and products onboard vessels
• Evaluate consistency of Water Treatment and Energy Management programs through on-site sample analysis and observation
• Collaborate with Chief Engineers and marine officers about full scope and application of Company product line
• Provide solutions for increased efficacy of Company products and identify potential vessel needs
• Supervise, whenever necessary, inspections, chemical cleanings, and installation and repair of Company equipment
• Provide training to the crew
• Maintain vessel information files through the use of service/technical assistance reports and conceptualize information towards achieving actionable knowledge
• Visit accounts with Account Executives and Area Manager to better understand client needs & key contacts
• Other tasks and projects may be assigned from time to time

Required / Desired Knowledge, Experiences and Skills:

• Relevant Bachelor’s or Diploma degree with 3-5 years’ experience, or 5-8 years of related experience, in a technical role in the Marine or Chemical industry
• Strong interpersonal skills when working with colleagues and international maritime clients
• Strong communication skills, both verbal and written
• Strong technical knowledge and experience
• Flexible and motivated work ethic, with desire to serve the needs of the clients
• Commitment to safe working practices and environmental stewardship
• Understanding of maritime regulations a plus

Education/Certifications:

• Degree or Diploma with over 2 years of experience in Marine engineering and Mechanical or chemical engineering related background

Physical Working Environment:

Position may be exposed to harsh industrial and external elements such as heat, vibration, noise and weather when onboard vessels and at ports. Must be able to navigate the structures and obstacles commonly found on ocean going vessels, such as vertical stairs, gangways, and narrow passages, and poses safety awareness around operating machinery and moving objects. Position requires travel approximately 25%.

Job Description:

Requires an expert with knowledge of a broad range of IT technologies.
* Proven 2years of experience as an IT professional.
* Knowledge of Linux/UNIX and/or Windows Server operating systems is essential
* Understanding of Nutanix prism, Microsoft HyperV and related virtualisation technologies
* A good knowledge of MS SQL
* An understanding of SAN, NAS and Veeam storage technologies including storage replication
* Maintain inventory and asset configuration documentation for network switches, servers and workstations.
* Ensure the implementation of IT Security System that are aligned of High Availability and Disaster Recovery
* Ensure network security, efficiency and availability for entire IT infrastructure.
* Experience of open-source software and the principals behind it. and using it
* Knowledge of capacity planning and performance measurement techniques
* Strive to learn and ability to interpret performance statistics, identify bottlenecks and translate application load projections into infrastructure utilization projections
* An understanding of Enterprise Security and IT risk management
* Some knowledge of programming languages and current software development practices such as Visual Stdio

Requirements:
- Diploma or Degree in Electronic or IT
- At least 2 years in related field
- Knowledge of VM, Microsoft Servers, Unix, VLAN and etc.
- Knowledge of server and desktop hardware troubleshooting and setup
- Strong analytical, problem solving and decision-making skills
- Ability to work Independently
- Preferable with CCNA