The Supplier Quality Engineer will be based in Changi South.

Job Responsibilities

• Attend day to day part quality issues / MRB reviews.
• Serve as the primary point of contact for all supplier-related quality issues.
• Cross-Functional Collaboration: Collaborating with internal teams, such as Engineering, Procurement / Buyer, Planner, Operation, Logistic to address any supplier-related quality issues.
• Collaborating with suppliers to identify root causes of quality issues and implementing effective corrective and preventive actions. Review CAPA effectiveness, ensure no repeating occurrence.
• Work with IQC team in reviewing incoming parts from suppliers with no defects and ensure quality.
• Facilitate effective communication and collaboration between suppliers and internal stakeholders as well as customers.
• Seek for Continuous Improvement with suppliers.
• Identify opportunities for continuous improvement in supplier quality processes and systems.
• Lead initiatives to reduce defect rates and improve overall supplier performance.
• Collaborate with suppliers on process improvements and quality control enhancements.
• Support supplier audits to ensure compliance with quality standards and regulatory requirements.
• Support evaluation and approve new suppliers based on quality performance and capability assessments.
• Documentation: Maintaining accurate records, reports, and documentation related to supplier audits, evaluations, and inspections.
• Supports supply chain in the selection and qualification of suppliers’ parts being procured - FAI (First Article Inspection).
• Any ad-hoc duty as assigned by Superior.

Job Requirements

• Requires a Bachelor’s Degree in Engineering or related field with minimum 3-4 years of related experience.
• Requires experience in supplier quality engineering within the semiconductor manufacturing industry.
• Strong communication and interpersonal skills, with the ability to work effectively with suppliers, internal teams, and customers.
• Able to read blueprints and/or drawing standards.

RESPONSIBILITY
· Plan and allocate tools, material and manpower for fabrication;
· Ensure that all the technical reviews by engineering team comply with project requirements;
· Coordinate all technical queries with related parties – engineering team, client, vendor etc;
· Assist Project Manager in streamlining work processes;
· Coordinator with team to review all subcontract and supplier shop drawing, product data, samples,
manuals etc for all compliance with contract documents;
· Manage vendor documents for all equipment;
· Monitor and ensure all the vendor equipment delivery are on time, including checks on inspection status and requirement;
· Prepare tender submission, cost estimation and project change request;

*Prepare monthly P&L reporting.

*Able to use AutoCAD – Advance Steel Software.
· Any other duties as assigned.

Please note that duties of the Employee may change and develop over time.

REQUIREMENTS

· Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Mechanical) or equivalent

· Proficient in design software such as PV AutoCAD

· Proficiency in English language (spoken and written) with strong communication skills

Job Description:

We are seeking a highly skilled OpenShift Container Platform (OCP) resource to join our team. The ideal candidate will have a robust background in OCP with a minimum of 5 years of experience, including at least 1 year directly relevant to this role. The successful candidate will be responsible for managing and optimizing OpenShift environments and supporting our containerized applications.

Key Responsibilities:

Design, implement, and maintain OpenShift environments, ensuring alignment with industry standards and business goals.

Manage and troubleshoot issues related to OpenShift platforms.

Collaborate with development and operations teams to optimize containerized application performance.

Develop and maintain CI/CD pipelines for containerized applications.

Ensure high availability, scalability, and security of OpenShift environments.

Provide technical support and guidance to team members.

Essential Qualifications:

Minimum of 5 years of experience with OpenShift Container Platform.

At least 1 year of relevant experience in managing and optimizing OpenShift environments.

Proficiency in containerization technologies and orchestration tools.

Strong understanding of Kubernetes and Docker.

Experience with CI/CD tools and practices.

Excellent problem-solving and troubleshooting skills.

Strong communication and collaboration abilities.

Desirable Qualifications:

OpenShift certification or other relevant certifications.

Familiarity with cloud platforms (AWS, Azure, GCP).

Experience with infrastructure-as-code tools (e.g., Terraform, Ansible).

Job Responsibilities:

Test Planning and Strategy

- Assist in comprehensive test strategies and plans in collaboration with stakeholders.

- Define test objectives, criteria, and priorities based on software requirements and business goals.

- Ensure alignment of testing efforts with project timelines.

Test Execution

- Execute hands-on testing, including manual and automated testing, to verify software functionality, performance, and security.

- Conduct rigorous regression testing, exploratory testing, and user acceptance testing (UAT).

- Review and approve test cases and test scripts for accuracy and coverage.

Test Automation

- Champion test automation best practices and contribute to the growth of automation coverage.

- Continuously improve the test automation infrastructure for efficiency and scalability.

Defect Management

- Establish and maintain a defect-tracking system.

- Ensure defects are documented, prioritized, and resolved in a timely manner.

- Communicate defects and testing progress to stakeholders.

Collaboration and Communication

- Collaborate closely with software developers, product managers, and other stakeholders to resolve issues and improve product quality.

- Communicate testing status, results, and recommendations to senior management.

Test Documentation

- Create and maintain test documentation, including test plans, test cases, and test reports.

- Ensure that testing documentation is up-to-date and accessible to the team.

Requirements:

Proven experience as a Software Test Engineer, with a focus on automation

Strong knowledge of software testing methodologies, tools, and best practices.

Proficiency in programming/scripting languages

Extensive experience with test automation tools and frameworks

Excellent problem-solving skills and attention to detail.

Strong communication and collaboration skills.

Responsibilities

Provide first-level technical support to end-users .

Provide basic infrastructure or network troubleshooting. Diagnose and resolve technical issues efficiently

Install, configure, and update software applications, desktops, laptops, TV, Meeting Room bookings and peripherals.

Create and maintain accurate IT documentation

Review and maintain IT contracts with vendors

Review all software licences and provide periodic updates & recommendations.

Plan and provide a table of report on upcoming licences renewals and ensuring the accounts are done correctly and on-time.

Maintain an inventory of IT equipment and ensure accurate asset tracking.

Review need of IT requisition from users and obtain approval from user’s department head .

Procure, manage, and maintain office IT equipment and cabling to meet agreed standards.

Conduct periodic system audits and ensure IT systems meet security and compliance standards .

Assist with office infrastructure setup and maintenance, including firewalls, access points, printers, and workstations.

Support employee onboarding and offboarding.

Requirement:

Diploma or Degree in Computer Science, Information Technology, or a related field.

Minimum of 3 years of experience in tech support, desktop support, or a similar role.

Proficiency in Windows, Linux, and Mac OS; familiarity with both PC and Mac hardware and software is essential.

Experienced in using and supporting Microsoft 365, MS Teams and Sharepoint support.

Be self-reliant and take ownership of their responsibilities.

Able to communicate clearly with stakeholders and IT team.

Exhibit excellent teamwork skills and adapt to company’s culture and practices.

Maintain a high standard of work and adhere to service timelines to ensure operational efficiency.

Identify areas for improvement in the IT support processes and implement changes to enhance service delivery.

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Please email your resume in a detailed MS Word format to [email protected] stating

Expecting Salary

Date Available

Reason to Leave each job:

We regret that only shortlisted candidates will be notified

Joyce Koh Ai Leng

People Profilers Pte Ltd

20 Cecil St, #08-09, PLUS Building, Singapore 049705

Tel: 6950 9737

www.peopleprofilers.com

EA License Number: 02C4944

EA Personnel Reg nos R1110618

Job ID: LR35697X

THE PERSON:

The ideal candidate should have a deep understanding of analog design and able to lead, attend and present at design review meetings with teams worldwide.

KEY RESPONSIBILITIES:

• Circuit design of wireline transceiver building blocks (PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer, etc.)
• Conduct peer reviews of circuit design and verification results
• Working with validation team to evaluate silicon results

PREFERRED EXPERIENCE:

• Extensive experience with high speed analog design with blocks like ADC, PLL, clock distribution, receiver front-end, transmitter front-end, serializer, deserializer.
• Experience with latest process technologies like 7nm or below Finfet technology.

ACADEMIC CREDENTIALS:

• Bachelors/Masters/Phd Degree in Electronic Engineering

LOCATION:

Singapore

Job Title: Senior Project Engineer

Location: Singapore

Industry: Oil & Gas

Employment Type: Contract

Start Date: January 2025

Duration: 1-year

NES Fircroft has partnered with our client, a leading Oil & Gas company dedicated to innovation and providing comprehensive industrial solutions, to seek a Senior Project Engineer to join the team.

Main Duties:

Supervise & Coordinate project’s day to day activities including installation and coordination with consultants, main contractors and subcontractors.

Guide, provide inputs and comments, for the drafter to prepare installation plan drawings, detailed drawings for mechanical parts like piping layout, piping isometric drawing, pipe supports, process and mechanical plan drawings.

Controls project plan by reviewing design, specifications, and plan and schedule changes, recommending actions.

Check, confirm all safety documents and issue work permits to contractors in collaboration with site safety officers, work permit requirements will be trained by in-house team

Assist project manager or procurement in charge in preparation of tender documentation, procurement specification and Bill of quantity.

Manage and coordinate vendors and suppliers during commissioning and testing of the equipment and systems.

Assist Project Manager in the preparation of project Capex, budget estimation and cost allocation.

Conduct Toolbox meetings with safety officers onsite and maintain records.

With sound knowledge of process piping installation and equipment installation.

Able to work with drafters to produce Piping drawings, installation drawings, details design.

Qualifications:

Graduate of Bachelor's degree in Mechanical or equivalent engineering education.

Experience:

More than 5 yrs experience working on site installation coordination and project supervision.

Experience working at process/equipment construction site, plant installation, EPC, or equivalent.

With experience in giving inputs in technical design and technical document preparation.

With experience in piping installation, Equipment installation, pipe routing.

About the Role

We are seeking a proficient and detail-oriented Calypso Developer Engineer to join our team. The role involves developing solutions in Java for Calypso version 14 and above, supporting the production release roadmap, and troubleshooting issues to ensure system stability.

The ideal candidate will have extensive experience with Calypso versions higher than 13, exceptional Java development skills, and a proven ability to work in AGILE environments. This position is an excellent opportunity to work on complex systems and contribute to critical business operations.

Key Responsibilities

1. Development and Implementation:Design, develop, and enhance features in Java for Calypso version 14 and above.
   Collaborate with stakeholders to implement solutions aligned with business requirements.
   
2. Production Support:Support the production release roadmap, ensuring smooth deployment and system functionality.
   Address post-release issues promptly to minimize impact on operations.
   
3. Issue Troubleshooting and Resolution:Investigate, troubleshoot, and resolve issues in production environments.
   Ensure root cause analysis is conducted for recurring problems and provide sustainable fixes.
   
4. Collaboration & AGILE Practices:Work closely with cross-functional teams, including developers, testers, and system administrators, to deliver seamless solutions.
   Actively participate in AGILE ceremonies, such as sprint planning, stand-ups, and retrospectives.
   

Qualifications and Skills

• Technical Expertise:Excellent programming skills in Java and experience working with Calypso versions higher than v13.
  Strong knowledge of PL/SQL and Linux environments.
  
• Methodologies & Tools:Proven track record in AGILE frameworks, including iterative delivery and collaborative development practices.
  
• Problem-Solving:Exceptional analytical and troubleshooting skills to resolve complex system issues.
  
• Soft Skills:Strong communication and collaboration skills for effective teamwork.
  Organized and detail-oriented approach to managing multiple priorities.
  

Preferred Qualifications

• Degree in Information Technology, Computer Science, or an IT-related field.
• Experience in financial services or a similar industry.
• Familiarity with CI/CD tools and processes for managing production releases.
• Certification in AGILE (e.g., Certified ScrumMaster) or Java development.

Main duties:

• Provides technical support for sales staff, including installation, commissioning, testing and maintenance of all products handled by the respective divisions in the region.
• Project implementation of IT infrastructure or medical equipment system project in a hospital environment.
• Provide first level of support for network, server, and security.
• Troubleshoot hardware and software problems.
• Provides customer relations and ensures customer satisfaction on all application support, repairs, and servicing activities.
• Conduct training to end-user and staff members.
• Maintenance of relevant technical and product documentation and information.
• Provide feedback to the manager regarding product/project conditions in the field.

Pre-requisite:

• Diploma in Computer Networking / Engineering (Electrical/Electronics) with 2 years' experience.
• Preferably with 1 Year(s) of working experience in Computer Networking or related field.
• Customer-oriented, effective communication, and able to work independently

Qualifications:

• Graduate or Diploma/Degree in Electronics / Electrical Engineering.
• 5–8 years of relevant experience in Product/Test Engineering, with a preference for a foundry process background.
• Experience in leading a technical team is a plus.
• Strong understanding of test concepts for digital, PMIC, mixed signal, and RF products.
• Hands-on experience with Advantest 93K ATE.
• Proficient in statistics and data mining techniques.
• Strong data analysis skills, with experience in statistical analysis software such as JMP, CEDA, DataPower; knowledge of Optimal Plus tools is a plus.
• Familiarity with scripting languages (Perl, Java, VBA) and automation in reporting is advantageous.
• Excellent verbal and written communication skills with the ability to work independently.

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for AI Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Job Responsibilities:

• Design, build, and optimize machine learning models and algorithms to solve specific business problems.
• Collaborate with cross-functional teams to gather requirements, define objectives, and deploy models into production environments.
• Train and fine-tune machine learning models using appropriate algorithms and techniques. Evaluate model performance using techniques such as cross-validation, hyperparameter optimization, and ensemble methods.
• Deploy machine learning models into production environments. Implement APIs and integrate models with existing systems and applications to enable real-time decision-making.
• Monitor model performance and address any issues or anomalies that arise. Continuously improve models by refining algorithms, optimizing code, and incorporating feedback from users and stakeholders.
• Perform exploratory data analysis, generate insights, and present findings to stakeholders, using statistical methods and visualization techniques.

Requirements:

• Education qualification in Computer Science, Data Science, Machine Learning or relevant field (Fresh grads or students currently pursuing this area of studies are welcome to apply)
• Work, project or internship experience in designing, developing, and deploying machine learning models in real-world applications will be a strong advantage
• Knowledge of machine learning algorithms, techniques, and libraries (e.g., TensorFlow, PyTorch, scikit-learn)

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312

Job Summary:

• Responsible for ensuring optimal operation of machinery, equipment, and infrastructure within the manufacturing facility.
• This role includes troubleshooting, performing preventive maintenance, and providing technical support to minimize downtime and maintain high levels of efficiency and safety.

The Role:

• Conduct regular inspections and preventive maintenance on equipment, systems, and infrastructure to ensure smooth operation.
• Diagnose and resolve mechanical, electrical, and hydraulic malfunctions on production equipment, ensuring minimal downtime.
• Repair or replace damaged components in machinery and ensure all equipment is working properly after repairs.
• Assist in the installation and setup of new machines, including testing, calibrating, and adjusting equipment for optimal performance.
• Follow safety procedures and regulatory guidelines while performing maintenance work and ensure that all maintenance activities comply with company policies and legal requirements.
• Maintain accurate records of all maintenance activities, including repairs, replacements, inspections, and preventive maintenance schedules.
• Work closely with production teams to plan and execute maintenance activities that align with production schedules, minimizing disruptions.
• Suggest and implement improvements to maintenance procedures and equipment to enhance productivity and reduce costs.

What Do You Need to Have?

• Candidates MUST possess at least a Diploma or ITE in Electrical Engineering or its equivalent.
• He/she must possess a minimum 3 to 5 years of relevant working experience in electrical engineering works troubleshooting machineries, ships, trains, building facilities, etc.
• Positive working attitude and ability to work in a fast-paced environment.
• Excellent communication and interpersonal skills.

If you think you fulfilled the job criteria above, please send your updated CV to [email protected]

We would love to hear from you! Please note that only shortlisted candidates will be notified.

• Basic: $2,700 - $3,800
• Working Hours: 5 Days Mon-Fri (830am to 530pm)
• Location: Jalan Kilang Timor, Redhill (Office) / Curren project - Jurong or Woodlands Area

Responsibilities

• Able to manage project with minimal supervision;
• Attends external project kick-off meetings, meetings with clients or consultants as well as technical and co-ordination meetings, project meetings and internal project closure meeting;
• Ensures the adherence to the safe work procedure (SWP) established; and implement risk control measures;
• Resolves site problems proactively in a timely manner;
• Ensures the timely preparation of project progress and other reports;
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation;
• Co-ordinates daily activities of workers’ duties and to ensure that they are performed in a proper manner;
• Makes daily checks on work progress, housekeeping and safety implementation on site with safety personnel;
• Assists in cost control by reducing materials wastage, usage of tools and equipment, etc;
• Request and initiate orders of materials required for projects;
• Documentation on project progress and damage;
• Ensures proper project documentation including email communication;
• Any other related duties as assigned.

Requirement

• Degree in Mechanical Engineering or. Diploma in Mechanical Engineering with working experience.
• Knowledgeable in MS Office, MS Project and able to read construction drawing.
• Training Provided

Leong Jia Qi Reg No. : R24124746

The Supreme HR Advisory Pte Ltd EA No. : 14C7279

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

DESCRIPTION

The Piping Mechanical Engineer reports to the Project Engineering Manager and shall be responsible for technical compliance with all design requirements and coordination with the necessary Client and Subcontractor’s discipline engineering professionals. The lead piping engineer shall ensure that all de-signs comply with the requirements of the Work; that all Work is efficiently and effectively executed in accordance with the criteria, specifications and standards listed in the CONTRACT; and that the designs comply with safe and reasonable standards as accepted within the offshore oil and gas industry. They shall be responsible for his/her scope of work as given below:

DUTIES & RESPONSIBILITIES

• Prepare and review key project documentation in executing the complete scope of piping engineering work as per the project requirements.
• Familiar with offshore piping materials, stress engineering, platforms and FPSO layout design, material handling and pipe support design.
• Conduct 3d Model reviews as per project requirements.
• Experience in piping standards, creating MTOs.
• Ensure that technical compliance with all design requirements is met.
• Prepare and review detailed calculations, analysis, and solutions to deliver safe, secure, and fully functional facilities.
• Interface with Client’s Engineering team to resolve the technical issues.
• Effectively manage design changes and provide optimized solutions during project executions.
• Review and management of project general specifications, engineering procedures and policies.
• Provide work progress reports.
• Accountable for the quality engineering deliverables.
• Provide engineering guidance to Contractors wherever required.
• Achieve safety standards as defined in Project requirements.
• To achieve project completion to the project specifications on schedule.
• Support project planning as necessary.
• Field Engineering support during construction phase of the project.
• Coordinate with class for surveys and reviews related to shipyard work.
• Coordinate with internal and external parties for monitoring and controls.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

REQUIREMENTS

• Able to relocate to Dubai for Project duration, minimum 6 months.
• Minimum educational requirements of a Bachelor’s and/or Masters’ degree in mechanical/materials engineering.
• Direct experience as a lead piping engineer working on FPSO projects.
• Minimum 15 years’ experience, with Oil & Gas projects (fixed installations and FPSOs), with significant experience working as a Senior or Lead Engineer.
• Must have prior work experience with medium/ large sized brownfield and/or greenfield projects in the upstream Oil and Gas sector, in a similar role and possess a good understanding of project phases, milestones, deliverables, internal and external interfaces.
• Shall be skilled with commonly used business software applications such MS Office, MS project and drafting software such as AutoCad and ed modelling software such as PDMS.
• Shall be capable of supporting the development and implementing recommendations from third party safety studies and workshops, including HAZID/ENVID, SIL Classifications, Smoke, Gas, Fire and Explosion Risk Analyses, QRA, ALARP assessments, Fire and Gas Mappings and Noise Studies.

• To support customer in maintaining their existing AliCloud solutions in accordance with best practices.
• To fix issues in customers existing AliCloud solutions.
• To communicate with Alibaba Cloud for advice on technical issues.
• To communicate and align with offshore AliCloud Data Engineer on task assigned to FPT team.
• Bachelor degree or above in IT and engineering, with relevant professional certificates.
• AliCloud related certification is a MUST.
• At least 1 other cloud (non AliCloud) certification will be preferred. More cloud certifications will be a big PLUS.

Requirements

• 3 to 5 years of working experience in IT industry.
• Hands-on experience in at least 1 AliCloud related project is a MUST. More AliCloud projects will be a PLUS.
• Hands-on experience in other cloud (i.e. non-AliCloud) related projects will be a PLUS.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Scope:

• Assist in the design, development, and testing of mechanical systems and components
• Support the assembly of mechanical systems, ensuring alignment with specifications and quality standards
• Collaborate with engineers to improve and troubleshoot mechanical designs
• Conduct inspections and quality checks on assembled parts and systems
• Prepare and update technical documentation, including assembly instructions and reports
• Assist in the assembly and integration of mechanical components into final products
• Perform mechanical testing, collecting data and providing analysis for continuous improvement
• Support in the selection and procurement of materials for mechanical assemblies
• Coordinate with production teams to ensure timely and accurate assembly of components
• Provide technical support and troubleshooting during the assembly process
• Maintain and organize engineering tools, equipment, and assembly areas
• Ensure compliance with safety and industry regulations during the assembly process
• Assist in the development of prototypes and new product designs.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical Engineering
• 2 to 3 years of relevant experience
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD, and machine design is a plus
• Strong project management skills and self-disciplined
• Ability to work independently
• Good interpersonal and communication skills
• Willingness to travel when necessary

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Position Overview:

We are seeking a skilled Senior Physical Design Engineer to join our team. As a Senior Physical Design Engineer, you will be responsible for the entire process from RTL to GDS, ensuring the successful implementation of complex semiconductor chips. You will focus on block-level timing closure, formal checks, low power checks, power analysis, and signoff for block-level physical implementation. Your expertise in advanced process nodes, low-power design, and automotive chip physical design will contribute to the development of cutting-edge semiconductor products.

Responsibilities:

• Lead the physical design process, overseeing RTL to GDS implementation for semiconductor chips.
• Achieve block-level timing closure by optimizing design constraints, performing timing analysis, and applying optimization techniques.
• Conduct formal checks to ensure designs meet functional and timing requirements.
• Perform low-power checks and analyze power consumption to optimize power efficiency.
• Collaborate with the design team to develop and implement UPF (Unified Power Format) for power management and control.
• Execute block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff processes.
• Utilize Synopsys and Cadence APR (Automated Routing and Place) tools for high-quality physical design.
• Develop and employ scripts in Tcl, Perl, or Python to automate design tasks and improve the design flow.
• Mentor junior engineers and provide technical guidance and support as needed.

Qualification/ Requirements:

• Bachelor's/master’s degree in electrical engineering, Computer Engineering, or a related field.
• 3-5 years of experience in physical design for semiconductor chips.
• Proficiency in RTL-to-GDS flow, timing closure, low-power design, and power analysis.
• Strong understanding of UPF for power management and control.
• Experience with block-level Place and Route (APR), Static Timing Analysis (STA), Power Integrity (PI), Physical Verification (PV), and Formal Verification (FM) signoff.
• Familiarity with Synopsys and Cadence APR/Sign-off tools.
• Proficiency in scripting languages such as Tcl, Perl, or Python for automation.
• Able to guide junior colleague when needed.
• Excellent problem-solving skills and ability to work effectively in a team environment.

Responsibilities:

• Manage existing customers and develop new potential opportunities
• Responsible to review customer technical quotation packages, work with relevant department to complete the sales proposals/ quotations for management review and present to customer
• Ability to handle all the enquiries and negotiation with customer
• Responsible to perform Sale Contract/ Manufacturing Service Agreement reviews and present to management and customer
• Liaise and co-ordinate with customers and other departments pertaining to project activities and order fulfilment
• Manage product EOL, ECN, obsolesce claim, product transfer, and product sustaining activities such cost reduction, alternatives by working with internal functions

Requirements:

• 2-3 years of relevant experience in the electronics manufacturing industry, preferably in Electronics Manufacturing Service and in Business Development/ Program Managerial capacity
• Degree/ Diploma in Electronics Engineering
• Technical competency to engage customers for specifications and process reviews
• Excellent communication skills both oral and written, mature and strong analytical skill.
• Good knowledge of software office tools especially Microsoft excel and Powerpoint application and ERP software

A REWARDING PLACE

You have the opportunity to work with a creative and collaborative team at the forefront of technology, trends and practices. We are huge advocates for career development and our global operations provide opportunity for professional mobility. Be inspired to grow your abilities, learn from experiences and build the skills you need to forge ahead.

EQUAL OPPORTUNITY EMPLOYER

AEM is an equal opportunity employer committed to promoting and maintaining a diverse, equitable and inclusive environment where differences are valued and encouraged. We employ individuals who align with our values and meet the requirements of the role. All qualified applicants will receive consideration for employment.

Project Client Management:

• Excellent execution of project towards company objectives and client satisfaction
• Good understanding of job nature
• Monitor progress of project and update project status to Superior & Finance Department
• Being efficient & manage project efficiently
• To assist engineers in day-to-day issues

Technical Competencies:

• Good understanding of local code requirements
• Good engineering knowledges in relation to company services offered(eg. M&E professional services, Green Mark Related work etc.)
• Help to review the works of the engineers assigned to you, with the objective of compliance to local authority requirements coupled with sound engineering principals

REQUIREMENTS :

• Degree in Electrical or Mechanical Engineering or equivalent.
• Minimum 5 years of working experience in M&E consulting firm.
• Strong building M&E knowledge with hands-on experiences.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD / BIM software is an added advantage.
• Provide guidance to junior engineers.
• Able to work as a team, assertive, independant and proactive.

Interested candidates please submit updated resume via “APPLY NOW”.

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

Company’s Profile:

Our client is an international technology and engineering company that specialises in providing innovative digital and security solutions to their esteemed clients. They are well-known for their dedication of quality delivery standards with more than 15,000 engineers globally supporting projects. They have an international presence in over 100 countries worldwide and are looking out for System Engineers to join their team and contribute to their ongoing success.

Location: Ang Mo Kio/Yio Chu Kang area

Working hours: Mon - Fri, 8.30am - 6pm

Job Responsibilities:

• Closely collaborate with Project Manager and Engineers to support the fulfilment of contract obligations within timeline, cost, and scope
• Manage and oversee project documentations and subcontractor matters
• Perform System Setup, Database setup, resolve technical & design issues
• Support for IT infrastructure comprising Microsoft OS
• Basic setup of Network switches and able to perform network check and IP address configuration of all the network devices within the project
• Installation, Debug and troubleshooting IT-related issues

Requirements:

• At least 1 – 2 years’ onsite Systems Engineer experience, with experience in Database, Cybersecurity and Windows OS Virtualization
• Excellent communication skills with customers
• Keen sense of urgency for service performance issues
• Diploma or Degree in any IT discipline or equivalent

Interested candidates may whatsapp your resume to 6421 4965. Only shortlisted applicants will be contacted.

Cassie Chan | R2197426

Talentsis Pte Ltd | EA No: 20C0312