Job Responsibilities:

• Manage the maintenance and daily operations of the building facilities with the objective of always achieving uninterrupted function
• Ensure contractor service level agreements and key performance indicators are met or exceeded
• Perform routine facilities activities including onsite inspection, fix-it verification, critical systems checks, functional testing, etc. Able to respond and act in response to facilities crisis management activities including power outages, fire alarms, and HVAC outages.
• Analyse data and identify trends with facility issues to determine the root causes and take appropriate action
• Respond to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards.
• Maintain compliance with Workplace Safety & Health (WHS) standards and electrical and building codes
• Ensure adherence to all standard operating procedures (SOP), method of procedures (MOP), and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process
• Participate in the scheduling, coordination, and completion of all significant planned and emergency maintenance events fo the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems
• Plans, monitors, schedules, and implements measures on the Planned Preventive Maintenance Program for the company buildings and also ensures that the work is done in accordance with schedule and specification
• Provides technical support and take charge on matters concerning the parts replacement and repairs maintenance and service activities of all the mechanical & electrical equipment
• Liaise with contractors and suppliers regarding improvement works and purchasing of equipment and spare parts
• Prepares weekly and monthly building reports
• Planning building maintenance and operational programs for the awarded IFM contracts
• Liaison with all stakeholders, attend to stakeholders’ feedback and ensure a smooth operation of facilities. Ensuring efficiency of all building systems
• Preparation of budget and budget controls
• Ensuring all processes and compliance programs are met
• Familiar in administration and functioning of CMMS/FMS software for monitoring, reporting, data analysis and audit.

Requirements - Facilities Engineer

• Degree in Facilities Management or equivalent qualification or Diploma holder in equivalent qualification with more than 5 years relevant experiences
• Preferably with a minimum of 3-5 years' experience in Facilities Maintenance, Project Management.
• Able to comprehend, analyse and interpret complex project documents, including AutoCAD, Visio, and PDF documents.
• Technical and functional knowledge of building infrastructure including electrical and mechanical systems, fire detection and protection systems, building management systems, equipment maintenance, and construction of critical facilities environment.
• Possess Project management skills
• Good analytical, interpersonal and communication skills
• Able to be a good team-player
• Able to work under pressure

Job Description

• Collaborate with project engineer and quality team to design, develop, implement and deploy test processes for new projects.
• Complete test programs for production and manage test programs and control:

- Continuity Test

- 4-Wire Continuity Test

- Functional/Final Test

• Support instrumentation needs including:

- Work with engineers and technicians in development of headers

- Testing jigs

• Develop Acceptance Test Plan per product requirements.
• Develop and document testing procedures per product requirements.
• Engage in both sustaining and NPI support activities
• Identify necessary enhancements to diagnostics deployed in manufacturing and works with quality teams to drive corrective action.
• Ensure headers have sufficient quantity to support the production needs.
• Engage in both sustaining and NPI support activities.
• Perform root cause analysis for any testing related failures.
• Perform other duties/projects as required or assigned from time to time.

Requirements

• Degree in electrical or mechatronics engineering
• Minimum of 2 years experience in Electrical testing, Manufacturing, or similar roles.
• Strong background in testing principles, header & test jig development and processes.
• Design best-in-class performance testing approaches and plans for new projects per customer requirements.
• Must be well versed in electrical know how.
• Able to work well with inter-teams.
• Well versed in CIRIS tester will be an added advantage.

Duties and Responsibilities:

a) Monitor compliance to airworthiness regulatory requirements and quality standards

b) Conduct of internal quality audits and vendor audits

c) Facilitate training on regulations and quality related subjects

d) Support Safety Management System program

e) Perform capability evaluation reviews

f) Administrate personnel authorisation approval

g) Conduct quality investigation, analysis and drive corrective actions

h) Maintain Quality related KPIs

i) Comply with Health, Safety and Environment (HSE) regulations as prescribed by local law and company’s policies.

j) Participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

k) Support to in Continuous Improvement Program

l) Any other duties as assigned

Experience and Qualifications:

a) Diploma / Degree holder in mechanical / electrical / electronic engineering or equivalent

b) Relevant CAAS papers qualification or equivalent will be advantageous

c) Minimum 2 years relevant working experience in aviation field is preferred

d) Knowledge on airworthiness regulatory requirements and AS9110 Standards

e) Trained Internal Quality Auditor / Lead Auditor is preferred

f) Safety Management System trained will be an added advantage

g) Good communication and writing skills

h) Knowledge in MS Office (Excel, Word, Powerpoint, Power BI), SAP, etc

i) Willing to work excess hours when required

j) Able to do business travel in short notice

k) Possess knowledge of statistical tools and methodology

l) Good team player and ability to handle tight datelines

We are seeking a motivated Semiconductor Engineer with a strong focus on Manufacturing Execution Systems (MES) to support and enhance our semiconductor production operations. In this role, you will work closely with the manufacturing team, IT, and other cross-functional teams to implement, maintain, and optimize MES systems that track and monitor production processes in real-time. You will be a key player in improving operational efficiency, data accuracy, and production quality.

Key responsibilities:

• Implementation & Maintenance.Troubleshoot and resolve any issues related to the MES, ensuring minimal disruption to production operations.
• Analyze and improve manufacturing processes using MES data to identify bottlenecks and inefficiencies.
• Collaborate with process engineers and production teams to implement process improvements based on real-time data.
• Ensure accurate and timely data collection from the MES for production tracking, quality assurance, and inventory management.
• Generate and analyze reports to provide insights into production trends, equipment utilization, and yield performance.
• Provide technical support for the MES system during daily production activities, ensuring smooth and efficient operation.
• Work with production teams to ensure proper system use and training on MES functionalities.
• Lead efforts for system upgrades and improvements, ensuring the MES stays current with technological advancements.
• Collaborate with software vendors and internal IT teams to evaluate and implement new MES features or modules.
• Support quality assurance initiatives by ensuring that MES tracks and reports key metrics for product quality and compliance.
• Assist in root cause analysis when defects or quality issues arise, utilizing MES data to aid investigations.
• Collaborate with cross-functional teams, including IT, process engineers, and production managers, to align MES features with operational needs.
• Provide technical expertise to help streamline operations, improve manufacturing yield, and enhance productivity.

Key requirements:

• Bachelor’s Degree or Diploma in Engineering, Information Technology, Computer Science, or a related field.
• Previous exposure to any of the commercial MES systems is a plus
• Previous experience in the management of IT applications connected to external systems
• Previous experience in the management of shop-floor devices (tablet, barcode scanners, label printers) in a cleanroom / sterile environment
• Ability to troubleshoot and resolve hardware and software issues.
• Working knowledge of Windows operating systems
• Understands cGMP principles and requirements.
• Must be able to communicate effectively with internal and external teams in both bilingual.
• Proven system requirements elicitation and documentation skills.

Responsibilities:

• Support recruitment not limited to design & job postings, interview scheduling, interview screening, reference checks, plan & propose remuneration packages align with market trending and government guidelines.
• Prepare onboarding documents, coordinate onboarding, and announcements.
• Prepare or maintain employment records related to events, such as hiring, termination, leaves, transfers, or promotions.
• Handle work pass applications, renewals, and cancellations.
• Manage off-boarding, including resignation letters and exit processes.
• Coordinate training programs, track completion, and handle funding applications.
• Assist in performance appraisals and employee communications.
• Coordinate with Operations Department in project executions, including fulfilling manpower requirements, site registrations.
• Implement HR-related programmes and policies, apply for HR-related certifications and grants, establish internships and industrial attachments with educational institutions, participate in recruitment fairs and organise Company events.
• Ensure procedures, products and services rendered comply to Company policies, government regulations and ISO standards.
• Maintain historical records for annual accounting and ISO audits.
• Undertake additional tasks and responsibilities when required or as instructed.
• Maintains compliance with local employment laws and regulations and recommended best practices; reviews policies and practices to maintain compliance with local employment laws.
• Maintains knowledge of trends, best practices, regulatory changes, and new technologies in human resources, talent management, and employment law.

Requirements:

• Able to support project recruitment drive conduct on Saturdays
• Minimum Diploma in Human Resources, or equivalent is preferred
• Minimum 3 years of work experience in the area of Human Resources
• Good knowledge and interpretation of the employment Act and government regulations
• Ability to maintain confidentiality with highly sensitive data
• Proficient in Microsoft Office programs (e.g. Word, Excel, Outlook, PowerPoint)
• Excellent written and verbal communication skills

A & One Precision Engineering was founded in 1992 and established itself as one of the leaders in the global precision engineering industry. A & One has leading technological capabilities in advanced manufacturing and currently serves customers in the Semiconductor, Aerospace, Medical Technology, Energy, Consumer Electronics and Telecommunications Industries.
As a Design Engineer, your responsibilities are:

• Support NPI (New Product Introduction) on product design and development.
• Oversee the design and documentation of components made from precision machined parts and sheet metal.
• Employ Design for Six Sigma (DFSS) tools to enhance design manufacturability.
• Conduct impact analysis to refine designs, ensuring they meet specifications, project timelines, and cost objectives.
• Participate in technical discussions and present design solutions to clients.
• Coordinate the fabrication, assembly, and validation of prototypes to ensure they meet specifications.
• Prepare drawing proposal and tooling design.
• Conduct tooling buy-o7 and hands-on tooling setup.
• Initiate and conduct the improvement project evaluation.
• Liaise with customer on design requirement and alignment.
• Liaise with factory on capability compliance.
• Responsible on tooling expenses and cost control.

Requirements:

• Min. Diploma in Mechanical Engineering/ Mechatronics Engineering/ Precision Engineering.
• Proficient in using Solidworks and/or other 3D modelling software
• Proficient in using CAD/CAM Programming
• Preferably with working knowledge and experience in tool & die, jig & fixtures design.
• Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and Tolerance Stack-up Analysis.

Job Description

• Collaborate with project engineer and quality team to design, develop, implement and deploy test processes for new projects.
• Complete test programs for production and manage test programs and control:

- Continuity Test

- 4-Wire Continuity Test

- Functional/Final Test

• Support instrumentation needs including:

- Work with engineers and technicians in development of headers

- Testing jigs

• Develop Acceptance Test Plan per product requirements.
• Develop and document testing procedures per product requirements.
• Engage in both sustaining and NPI support activities
• Identify necessary enhancements to diagnostics deployed in manufacturing and works with quality teams to drive corrective action.
• Ensure headers have sufficient quantity to support the production needs.
• Engage in both sustaining and NPI support activities.
• Perform root cause analysis for any testing related failures.
• Perform other duties/projects as required or assigned from time to time.

Requirements

• Degree in electrical or mechatronics engineering
• Minimum of 2 years experience in Electrical testing, Manufacturing, or similar roles.
• Strong background in testing principles, header & test jig development and processes.
• Design best-in-class performance testing approaches and plans for new projects per customer requirements.
• Must be well versed in electrical know how.
• Able to work well with inter-teams.
• Well versed in CIRIS tester will be an added advantage.

We are seeking a highly organized and detail-oriented Construction Admin cum Account to assist in the management and coordination of construction projects.

Main Duties and Responsibilities:

- Issue invoices in a timely manner.

- Assist in managing and coordinating with various stakeholders, including consultants and contractors.

- Ensure timely issuance of Statements of Account (SOA) and track payments.

- Monitor construction progress, conduct site inspections to ensure compliance, and identify discrepancies.

- Assist in preparing, managing, and administering construction contracts.

- Prepare and submit project progress reports.

- Perform other relevant duties and tasks as assigned.

Requirements:

- Diploma in Administration or a related field.

- At least 2 years of relevant experience in accounting, bookkeeping, or a related field.

- Proficiency in accounting software, drafting tools, and project management systems.

- Excellent coordination and stakeholder management skills, with the ability to work with diverse groups.

- Detail-oriented, organized, and a collaborative team player.

Job Description:

--Calculate the quantities of road signs of various sizes.
--Verify completed work (based on workers' completion photos) and contracts to ensure accuracy.
--Learn to calculate pricing, prepare quotations, and bid for projects (training provided).

Worker Requirements:
--Relevant work experience

Company Benefits:

--Annual and medical leave per Ministry of Manpower (MOM) guidelines.
--Allowances and bonuses provided.

Statement Of Purpose (Overall Purpose of Job)

To provide and assist in management & financial reporting.

Major Duties & Responsibilities

(A) Specific :

• Ensure timely, accurate month-end closing and financial reporting to Management
• Responsible for accounting processes and tasks (i.e.: AP & AR process, GL, account reconciliation, etc.).
• Ensure reporting integrity and compliance with FRS.
• Review and analyse monthly financial performances and key performance indicators.
• Coordinate and liaise with external parties like external auditors, tax agents, corporate secretarial agents, local tax and government authorities where required
• Support forecasting and budgeting exercise.
• Review and analyse actual, forecast and budget.
• Support and ensure compliance with all finance filing requirements, tax filing requirement (GST/CIT), audits, procedures and forms both statutory and internal.
• Assist in new processes and system implementation when required.

(B) General :

• Ad-hoc reporting and analysis.
• Other duties as assigned.

(C) Safety:

• Be aware of Occupational health and Safety Policy.
• Follow the Company safety procedures, rules and regulations.
• Eliminate or reduce hazard at the work place.

Job Requirements

(A) Education, Qualifications & Special Training:

• Minimum Degree in Accountancy, ACCA / CPA / CA.
• Job holder without the above qualification but with relevant experience would be considered.

(B) Knowledge & Skills:

• Good knowledge on Financial Reporting Standards (FRS).
• Possess strong analytical skills.
• Proactive, committed and good team player with effective inter-personal skills.
• Proficient in Excel.

(C) Experience:

• Minimum 3 years financial related experiences.
• Preferably with experience in construction industry.

Job Description

• Generate initial Bill of Materials
• Co-ordinate and issue official drawing/data to vendors for making of First article and samples for approval
• Disseminate engineering data and/or any changes to respective key personnel
• Continued process improvement to reduce cost, improve sustainability and develop best practices

Requirements

• Diploma in Engineering
• Min 2 to 3 years related experience
• Knowledge in Solidwork or equivalent
• Posses good communication skills

Job Description

• Production improvement program. (Process/time/control/cost down)
• Design Jig & Fixture to aid production integration/testing.
• Hands-on assembly & testing on modules.
• Assist in resolving technical issue and liaising with customer for closure.
• Responsible for mechanical component selection, tolerance analysis, motion system design, component evaluation, overall system integration, and finally release to manufacturing and installation.

Requirements

• Diploma in Mechanical Engineering or related technical disciplines.
• Minimum 2 years’ experience in related field.
• Strong fundamentals in mechanical concept and problem-solving skills.
• Self-motivated individual who is action/results oriented, independent, flexible with a passion for developing technical excellence products.
• Willings to get hands-on during development cycle.
• Excellent communication skills, with cross-cultural awareness and understanding.

Handling of Administrative matters and HR matters.

• Payroll
• Work Pass Application
• Document preparation, data entry and filing
• Update and maintain employees' database (in Excel and infotech)
• Arrange for trainings and appointments
• Renewal of license
• Handle and arrange for new employee and for repatriation.
• Other Ad-hoc jobs assigned

Requirements

• Min 1 yr experience
• Proficient in Microsoft Office software (Compulsory: Words and Excel)
• Effective communication skills, in both English and Mandarin
• Efficiency and accuracy
• Cooperative team member
• Willing to learn

Our company is in need of Foreman for construction industry.

Criteria:

1. Healthy

2. Good to have Singapore Class 4 driving license, more than 3 years

3. Drivers to be older than 24 and younger than 68 (due to insurance T & Cs)

4. ONLY for drivers currently in Singapore

5. Knowledge on workshop and site operations

Salary:

Approximate amount S$3300

· Interpretation of construction designs

· Project planning and analysis

· Attend meetings and go onsite walks

· Keeping records

· Inspection of materials

· Problem solving role

· Timely completion of projects

· Making plans using detailed drawings

· Preparing estimates and budgets

· Completing regulatory documents concerning safety issues

· Creating accurate project specifications

Job Description

Key Responsibilities

Performs all CMP standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Objectives

Design and develop both optoelectronics devices and integrated photonics sub-system platforms. Devices includes but not limited to SOA, gain chips, FP lasers, DFB lasers (CW and DML) and SLEDs. Photonics integrated platforms include but not limited to photonics integrated circuits, Silicon-based integrated platforms, standard/custom packaged modules, as well as optoelectronics sub-systems (i.e. includes both optical and electronics sub-modules) to meet design goals and requirements.

Duties and Responsibilities

• Perform simulation of optoelectronic devices (CrossLight, ALDS, Optiwave), optical ray tracing (Zemax, Optalix), thermal (Solidworks) and electrical (5Spice) properties of optoelectronics devices
• Analysis of optoelectronics device epi growth, participate in wafer fabrication process integration, mask design integration, device functionality and reliability performance characterization and test results.
• With reference to state-of-art competitors, simulated performance and data-mining internal test-results database, you will refine the design, fabrication specifications, and simulation model and parameters to optimize fit between design and measured outcomes.
• Report generation of design and simulation outcome with support of experimental data, where available
• Build up database of optoelectronics device design white papers, and management of all design documentation repository
• Responsible for leading/co-leading programs with several major global players in the development of photonic integration solutions to support the Silicon Photonics platform for datacom and sensing applications.

1. Development will be beyond simplex monolithic integration with regrowth for spot size converters and array devices, towards multiple functionality PICs incorporating active devices of lasers, modulators and detectors with passive devices of waveguides, polarizers, MMI splitters and optical filters.
2. Development of multiple functionality PICs designed to be compatible to Silicon Photonics to form a larger scale integrated System-on-a-Chip component.

• Lead and manage qualification and transfer of product to manufacturing upon development completion.
• All other reasonable duties, as assigned

Qualification Guidelines

Minimum Education

Candidate must possess at least a Bachelor or Master in Engineering (Electrical/Electronics/Computer/Optics)

Minimum Experience

• 5 - 10 years’ working experience with technical background in optoelectronics and wafer fab processes in optical laser component, photonics device system and sub-system
• Proven working experience in optoelectronics design and development and program/project management in the photonics manufacturing industry
• Software knowledge of MS Office, JMP, PDF/Spot-fire is a plus
• Excellent inter-personal and communication skills, both written and oral.
• Possess the ability to work independently, self-motivated, initiative and deliver tasks on time.
• Must be team oriented, positive working attitude, able to multi-tasks in a fast pace environment and work with personnel at all level.

Key Responsibilities

• Responsible for all technical support related aspects at a specific customer: escalations, fleet performance, system installations, improvement programs and upgrades.
• Acts as intermediary and field escalation focal point between customer and Division by providing technical support and documentation to field engineers, technicians and product support personnel who are diagnosing, troubleshooting, repairing and debugging equipment.
• Provides Alpha Site support to Engineering specifically related to installation, operation, calibration, service and /or testing of a new hardware, process or software design in house or on an engineering tool
• Provides Beta Site Support; specifically related to installation, operation, calibration, service and/or testing of a new hardware, software or processes on a customer tool.
• Initiates and provides review of ECO's to ensure data supports fix and follow up with communication to the field.
• Generates and presents system performance data as required. This includes performance metrics such as MTBF, MTBI and Availability. Reporting will also include process data and I/W spending analysis.
• Supports GPS in the generation of documentation such as CENs and BKMs. Creates and reviews documentation covering technical improvements, system upgrades, and support plans. Presents at customer level. Ensures field implementation.

Requirements

• Prior hands-on experiences in Wafer Fabrication Semiconductor tools (CVD, PVD, Etch)
• Relevant education qualification in Engineering
• Ability to work with deadlines and with all levels of internal and external stakeholders including customers
• Ability to work in cleanroom work environment

Work Location

• Science Park II

Authorities and Responsibilities

• Act as primary customer contact, and provide technical support and regular update to customers on project development in a timely manner.
• Communicate and co-ordinate with clients and relevant parties pertaining to the technical requirements and engineering aspects of the assigned projects.
• Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the project specifications, client's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their project execution.
• Provide expertise and advisory support to enable operations are effectively and responsibly execute, and consistently maintain, quality workmanship and conformance to design and project specifications, and good manufacturing / engineering practices.
• Plan, monitor and control projects from the receipt of orders through to installation / completion at the customer's site. Additionally to review and competently controlled the completion of project within the allocated budgets and schedules.
• Responsible for getting project acceptance by customers.
• Lead the cross-functional project team and work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
• Participate in the implementation of risk assessment and risk control of medical devices.

Competence Requirements

• Preferred to have NTC / Diploma / Degree in Mechanical / Manufacturing / Precision Engineering or equivalent.
• Preferably with 3 – 6 years of related experience in which 2 years of involvement with project management in a contract manufacturing environment.
• Preference will be given to those who have experience working with multi-discipline project teams in a manufacturing equipment or system integration environment.
• Working knowledge with precision machining / assembly processes is an advantage.
• Able to work effectively with customers according to deadlines and under pressure-filled conditions.
• Should be innovative, independent and motivated.

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Sandvik is a high-tech and global engineering Group with about 43,000 employees with a strong commitment to enhancing customer productivity, profitability and safety. Our operations are based on unique expertise in materials technology, extensive knowledge about industrial processes and close customer cooperation. This combination, coupled with continuous investments in research and development (R&D), has enabled us to achieve world-leading positions. We are seeking for people who are passionate in their work and possess the drive to excel to join us as:

Contract Outbound Planner (6 - 8 months)

The Outbound Planner is responsible for the order fulfilment to the End Customers. Meeting the service requirements agreed between the Customers and Sandvik Mining.

Job Description

1. Management of order fulfilment and delivery with a focus on efficiency and customer satisfaction. Accountable to the Sales Areas and Customers for performance.

2. Job activities include but not limited to:

• Daily Communication with End Customer, Sale Areas and Distribution Services
• Execution of Customer orders and ensure its correctness and completeness
• Monitor Order Fulfilment (Order To Delivery)
• Ensure right usage of Criticality code and mode of transportation
• Expedite Orders and seek alternative for long lead time parts
• Initiate improvement to optimize cost for Sales Area and Customers
• Prepared Monthly Service Level Report
• Schedule and Conduct conference call (Go to Meeting) with Sales Area & prepare minutes
• Communication with Global Pricing Team on the price update in the Sales Area System
• Communication with Freight Team to ensure shipment arrive at the agreed time line
• Additional duties given by the Management
• Run Aging report to ensure all the outstanding order been scheduled and update due dates for region to have information of order availability date

3. Investigate, follow up & resolve LPS such as:

• Item no price, expedite delivery dates, issue credit note/ misc. invoices, check with TSD for any technical issues.
• Monitor Emergency Orders up to POD
• Sales Area special requirement such as:
• Inspection arrangement, container arrangement, L/C arrangement, FOB, Ex-work term shipping arrangement & documents preparation & follow up if required to claim from Zurich.

Your Profile

• Diploma in Logistics Management / Bachelor in Logistics
• Prefer with work experience (3 to 5 years) in supply chain or customer service environment
• Strong Customer service background
• Strong Knowledge of Logistics Systems and Supply Chain understanding
• Good Knowledge of ERP systems and business management tools (System 21/ Aurora / Maximo, etc.)
• Competent in MS Excel.
• Ability to perform logical data analysis and problem solving.

Job Description

Key Responsibilities

Problem identification and troubleshooting a variety of difficult mechanical problems with limited supervision

Define, coordinate, perform, and document engineering test reports with limited supervision

Develop, design, or modify mechanical engineering layouts/schematics and/or detailed drawings/specifications of difficult scope

Perform engineering analysis of difficult scope with limited supervision

Technically lead and/or execute engineering projects, including development of key suppliers. Generate mechanical product specifications.

May be responsible for the design, development and implementation of custom mechanical tooling, fixturing, and associated processes to enable the handling, assembly and/or disassembly of parts, components, sub-assemblies and final assemblies throughout the product life cycle. Establishes standards across all operational processes

Specify and review engineering documentation

Implements concepts for variety of complex product issues and mechanical solutions

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Job Description

Key Responsibilities

1. Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of difficult scope
2. Problem identification and troubleshooting a variety of complex electrical problems with limited supervision
3. Define, coordinate, perform and generate engineering test reports with limited supervision
4. Perform engineering analysis of difficult scope with limited supervision
5. Technically lead and/or executes engineering projects, including development of key suppliers
6. Implements concepts for variety of complex product issues and electrical solutions of difficult scope
7. Generate electrical product specifications
8. Specify and review engineering documentation

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines

Business Expertise

• Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the market

Leadership

• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Problem Solving

• Solves complex problems; takes a new perspective on existing solutions; exercises judgment based on the analysis of multiple sources of information

Impact

• Impacts a range of customer, operational, project or service activities within own team and other related teams; works within broad guidelines and policies

Interpersonal Skills

• Explains difficult or sensitive information; works to build consensus

Key Responsibilities

Perform engineering analysis under general supervision

Design or modify mechanical engineering layouts/schematics and/or detailed drawings/specifications of moderate scope under general supervision

Perform and document engineering tests under general supervision

Generate related alpha/gamma documentation for product release under general supervision

Coordinate the procurement and assembly of mechanical components/equipment and identify sources of critical parts and subsystems to resolve moderately complex technical issues

Troubleshoot a variety of mechanical problems of moderate difficultly under general supervision

Implement concepts of moderate product issues and mechanical solutions of moderate difficulty

May be responsible for the design, development and implementation of custom mechanical tooling, fixturing, and associated processes to enable the handling, assembly and/or disassembly of parts, components, sub-assemblies and final assemblies throughout the product life cycle

Functional Knowledge

• Demonstrates expanded conceptual knowledge in own discipline and broadens capabilities

Business Expertise

• Understands key business drivers; uses this understanding to accomplish own work

Leadership

• No supervisory responsibilities but provides informal guidance to new team members

Problem Solving

• Solves problems in straightforward situations; analyzes possible solutions using technical experience and judgment and precedents

Impact

• Impacts quality of own work and the work of others on the team; works within guidelines and policies

Interpersonal Skills

• Explains complex information to others in straightforward situations