• Position : WSHO Manager (Building Construction/ECO/6 Days) - Up to $9,000 + Bonus
• Location : Island-wide
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $9,000 + Performance Bonus + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Ensure compliance to corporate EHS policy, implement actions to drive compliance and improvements to maintain EHS Management Systems
• Review any statutory updates, identify relevant EHS requirements, prepare procedures towards achieving compliance to the new statutory requirement
• Lead and facilitate compliance, EHS internal audit / surveys
• Organize and lead regular EHS inspections, meetings and monitoring of corrective / preventive action
• Develop procedures, programme to maintain compliance
• Review new process and lead risk assessment relevant to the new process
• Responsible for corporate EHS reporting requirements
• Lead incident and accident investigation, follow up on effectivenees of implemented action
• Plan EHS training programme to increase safety awareness
• Coordinate and work together with all departments, clients and contractor/vendors to advise on all EHS related issues
• Promote zero accident culture in the company to strive group EHS KPI targets

Requirements:

• Bachelor Degree in Engineering or Health and safety related disciplines with minimum 6 years working experience in Civil & Building Construction Industry / 3-5 years experience in Bored Piling Works
• Possess valid MOM registered WSHO, NEA registered ECO and PUB
• Certificate in BizSafe level 2 Risk Management or equivalent
• Possess class 3 driving license
• ISO 9001, ISO 14001 and ISO 4500

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : Project Manager (Civil & Building Construction/6 Days) – Up to $10,000
• Location : East - Changi / Pasir Ris
• Working hours : Monday to Saturday | 8.30am to 6.00pm
• Salary (commensurate with experience) : Up to $10,000 + Variable Bonus + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Civil Engineering & Construction

Main Responsibilities:

• Lead a team to deliver project on schedule and within budget
• Do overall project planning, scheduling, monitoring and updating to meet targets
• Manage risks, issues, budgets and scope throughout the project life-cycle
• Responsible for all construction site matters including safety and other compliance matters
• Ensure all works carried out meet with Clients/Company’s quality standards and requirements
• To meet Government / Statutory / Government Agency’s regulations/requirements at all times

Requirements:

• Degree in Civil Engineering accepted by Singapore PE Board/BCA with minimum 5 years experiences as a Project Manager with exposures in LTA MRT projects
• Knowledge of best practices in Construction Project Management
• Excellent in Leadership, Analytical, Planning, Organisational, Communication, Presentation skills
• Build and maintain positive relationships with external clients/internal teammembers
• Bilingual in English and Mandarin to communicate with co-workers who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position: Project Coordinator (General Contractor/Building Construction) – Up to $5,000 + AWS
• Location: Lower Delta Road (2 Bus Stops from Tiong Bahru MRT)
• Working Hours: Mondays to Fridays | 8:30am to 5:30pm | Saturday Standby at Home
• Salary (commensurate with experience): Up to $5,000 + AWS + Medical Benefits + 14 Days Annual Leave (10 Days on 2nd year and 14 Days on 3rd year)
• Duration: Permanent
• Industry: Building Construction / General Contractor

Responsibilities:

• Maintain customer relationship during project and Monitor customer satisfaction/dissatisfaction
• Covering of subordinate duties as and when necessary.
• Prepare and monitor Progress Claims and Subcontractor Payment.
• Prepare project reports and update project progress.
• Prepare Risk Assessment, permit to work forms and scheduling for project.
• Maintaining and monitoring project plans, project schedules, work hours, budgets and expenditures.
• Organizing, attending, and participating in stakeholder meetings, as well as documenting and following up on actions and decisions, and preparing presentation materials.
• Ensuring project deadlines are met and determining project charges.
• Undertaking project tasks as required.
• Any other ad-hoc administrative works as assigned by the respective head

Requirements:

• Minimum of Nitec/Higher Nitec with at least one year of relevant experience
• Must be proficient in Microsoft Office, Outlook etc
• Bilingual in English and Mandarin to liaise with associates who can only speak Mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Responsibilities

• Responsible for the quality management of machined products to ensure that product quality
• Ensuring that our internal management systems are well defined and relevant in meeting international standards and customer requirements.
• Lead and monitor the QMS incl. ISO9001 & ISO 14001 quality system certification and promote continuous improvement.
• Lead the quality team to implement quality inspection and control and manage non-conforming products.
• Participate in supplier evaluation and management to ensure the quality of raw materials and purchased parts.

Requirement

• Minimum Bachelor Degree in Mechanical or Industrial Engineering
• At least 3 years of quality management experience in the machining industry
• Proficient in using office software and mintab statistical analysis software, and possessing Six Sigma quality management knowledge and skills, e.g. SPC tools & 8D reports.
• Strong knowledge and experience in leading ISO9001 & ISO 14001 quality system certification.
• Proficiency in English and Chinese, with the ability to communicate effectively with stakeholders in China.

Job Scope

· Process payroll transaction, calculate staff & general worker’s overtime, and CPF submission.

· Maintain employee annual leave database and process petty cash.

· Prepare employment contracts, KETS (for staff), letters of appointment, and confirmation/ termination letter.

· Prepare job description, post job ads and source for suitable candidates.

· Proper filling for all the invoices and payment vouchers.

· Submission of year-end IR8A and IR21.

· Updating MOM Labour Survey and Occupational Employment Dataset (OED).

· Assist in ISO & GGBS Renewal & Surveillance Audit, BCA registration renewal, GeBiz renewal and BizSafe Renewal.

· Submission of application/ renewal for the Contractor Registration and Builder License under eBACS.

· Assign account codes to all transactions in the accounting system.

· Compile the relevant business documentation used in banking process.

· Coordinate and liaise with relationship managers of the bank.

· Maintain accurate financial records and statements.

· Record transactions and events relating to sales, purchases, receivables, payables and cash.

· Issuing and process payment vouchers, journal and bank reconciliation.

· Preparation and monitor weekly/ daily cash flow.

· Retrieve system reports from the accounting system for managements use.

· Submission of GST return.

· Prepare audit schedules and liase with auditor for the annual audit process.

· Prepare Project Budgeting for audit purpose.

· Coordinate with tax agent with the tax matters of the company.

· Coordinate and liaise with insurance for Performance Bond / Advance Payment Bond matters.

· Coordinate and liaise with insurance agent for Foreign Workers Hospitalisation Insurance renewal, WICA renewal and Machinery Insurance.

· Coordinate with valuer for the machinery valuation matter.

· Perform ad-hoc duties as assigned.

Requirement

*Education: A certificate, diploma, or higher qualification in accounting, administration, or a related field

*Skills: Proficiency in Microsoft Office and the internet, and the ability to use accounting software like MYOB

*Experience: At least two years of relevant work experience

*Language: Proficiency in writing and speaking English

*Other skills: Ability to multitask

WHO YOU’LL WORK WITH

Apparel and Accessories Costing Team is a function of Apparel and Accessories Supply Chain, driving costing model that is transparent, fair and fully digital across apparel and accessories. The team provides predictability, scalability and benchmarking of Nike manufacturing costs that improves end to end margin planning, cost mitigation and sourcing decisions. This role reports to Director, Apparel/Acc Costing, N Asia based in Shanghai

WHO WE ARE LOOKING FOR

The ideal candidate should have relevant experience and knowledge in Apparel/Accessories industrial engineering, costing, product construction, or production management. Good in product complexity analysis, workflow study and data management skills. Have good communication in technical manufacturing concepts with other stakeholders. A self-starter with ability to work independently and meet deadlines. Willing to learn and with “can-do” attitude. And below qualifications:

• Diploma or above. Minimum of 2-year work experience
• Certificate of General Sewing Data (GSD) and relevant knowledge in SAM (Standard Allowed Minute) /SMV (Standard Minute Value) analysis.
• Able to communicate in verbal and written English. Mandarin is a plus.
• Computer skills: Microsoft Excel, Word, PowerPoint, and Outlook.

WHAT YOU’LL WORK ON

As a Cost Engineer, this role will work closely with ACE managers and directors in optimizing the cost models in Nike, creating SAM/SMV database, managing the product cost analysis from manufacturing perspective, and driving cost improvement with best practice sharing. She/He will closely collaborate with both Nike internal and external stakeholders including factory partners to understand, collect and analyze the cost-related information, and then align the standard and processes.

Core Responsibilities include:

• Product Cost Engineering Analysis

1. Assist the Director/IE (Industrial Engineer) managers to design and enhance the product cost review tools (e.g. Product Standard Minutes - SAM/SMV database, Cost Matrices & Calculators) for quick and accurate product cost assessment.
2. Analyze the product cost based on style constructions, factory cost structure and other related cost factors e.g. Manufacturing efficiency during product development.
3. Liaise with Factory Partners (mostly their costing or IE teams) in case of critical gap (e.g. in SAM/SMV or other related production process) vs their quotation. Support the product development to resolve the costing challenges from product perspective.

• Update Nike cost model

1. Collect, review and analyze manufacturing information from factories or market research (machines, workflow, output/efficiency…) for setting the reasonable and sustainable cost models.
2. Track and report cost drivers (e.g. SAM/SMV, Efficiency/Productivity) Study the impact and drive the review with the key functions including factory partners, Manufacturing Engineering team and Product creation team.

• Improve factory cost performance

1. Collect and analyze production data. Report the factory performance through scoring Manufacturing Index or other measurements.
2. Study and share the best practice to improve the cost performance of factories. Regularly review and update any related cost benchmarks.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

We're seeking a skilled Engineer, Quality Assurance to join our team in Singapore. Reporting to the Engineering Manager, you'll play a critical role in ensuring the quality assurance aspects of our technical areas.

Key Responsibilities

• Participate in our shift-left testing process and entire Software Testing Life Cycle (STLC) to ensure high-quality products.
• Collaborate with Product Managers to define, test, and validate product requirements.
• Design, execute, and automate tests for web applications and backend APIs, ensuring comprehensive coverage.
• Produce detailed test reports and serve as the sign-off authority for feature releases.
• Work closely with Development teams to identify and resolve issues, ensuring seamless collaboration.
• Contribute to the evaluation and adoption of testing automation frameworks.
• Mentor junior QA engineers, sharing expertise and promoting growth.

Essential Qualifications

• Bachelor's or Master's degree in Computer Science or a related field.
• Excellent communication skills, with the ability to explain technical concepts to diverse audiences.
• 2-5 years of experience in web application testing and automation.
• Strong foundation in Software Engineering concepts and STLC life cycle.
• Ability to write test plans and test strategy documents.
• Good knowledge of API and Web testing, Networking, and Operating System concepts.
• Strong troubleshooting, debugging, and analytical skills.

Preferred Qualifications

• Experience with testing automation tools.
• Background working in product companies.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

Product area

In gTech Users and Products (gUP), our mission is to advocate for Google’s users by creating helpful and trusted experiences across the product ecosystem. We achieve this by meeting partners and consumers where they are with support and help, representing their needs with our product partners and proposing fixes and features that elevate their engagement with Google's diverse product ecosystem. Additionally we provide a range of product services that ensure our products are optimized for every user, no matter where they are in the world (e.g., localization, digitization, partner integration and more).

Job description

gTech’s Professional Services team takes a creative, collaborative, and customer-centric approach to provide foundational services and forward-looking business solutions to top advertiser and publisher customers. Through technical implementation, optimization, and key solutions, gTech Professional Services helps customers attain their business goals while building long-term capabilities.

Additional job description

In this role, you will be responsible for the technical relationship of our Distribution partners. You will collaborate with teams in Engineering, Business, and Product Management to use technologies for our internal or external clients/partners. From concept design and testing to data analysis and support, you will own the technical execution and work with business operations to distribute products such as Chrome, Lens, Android apps, and more. You will balance business and partner needs with technical constraints, develop innovative, solutions, and serve as a partner and consultant. You will also build tools and automate processes, oversee the technical execution and business operations of our products, as well as develop product strategy and prioritize projects and resources.

Qualifications

Job responsibilities

• Work with our Product, Engineering, and Partnership teams. Develop solutions, provide consulting services to our partners, build relationships, and know the partner's needs.
• Help partners in their day-to-day challenges by being the subject matter expert, delivering solutions, and troubleshooting their technical issues.
• Propose, design, create, and present proof-of-concept prototypes and demos to a variety of audiences, from engineers to marketing professionals.
• Perform implementation reviews. Advocate for new product features, and provide partner feedback to internal cross-functional teams including Product Management and Engineering.
• Deliver business intelligence. Use internal and external data sources to provide data insights to support decision making.

Minimum qualifications

• Bachelor’s degree in Engineering, Computer Science, a related field, or equivalent practical experience.
• 3 years of experience working with client-side web technologies (e.g., HTML, CSS, JavaScript, or HTTP).
• 3 years of experience coding with one or more programming languages (e.g., Java, C/C++, Python).
• Experience in technical troubleshooting, and managing internal/external partners or customers.

Preferred qualifications

• Master’s degree in Engineering, Computer Science, Business, or a related field.
• 5 years of experience in business intelligence, data analytics, or statistics.
• 5 years of experience working with systems (e.g. Linux, Unix).
• Excellent project management skills and attention to detail.
• Excellent problem-solving and troubleshooting skills.
• Ability to present to the technical level audience.

We are seeking a motivated Site Reliability Engineer (SRE) to join our team. The ideal candidate will ensure the reliability, performance, and scalability of CIX’s technology stack while supporting critical infrastructure needs globally. With a diverse client base across multiple jurisdictions, you are also required to cover London business hours to ensure smooth operations and effective collaboration. This is a hands-on, dynamic role where you’ll collaborate with multiple departments, providing insights and improvements that align with our global growth strategy.

Responsibilities

• Manage scalable and resilient infrastructure using cloud solutions
• Implement and maintain monitoring solutions to track system health and performance across application and data systems.
• Respond to alerts and incidents, troubleshooting issues as they arise to minimize downtime and ensure high availability.
• Conduct post-incident reviews (PIRs) to analyze failures and improve systems and processes, optimizing resource utilization to ensure cost-effectiveness while maintaining performance and reliability.
• Implement CI/CD pipelines for deployment processes to automate and enhance deployment processes.
• Monitor system capacity and usage trends to anticipate future needs, working with the team to identify and resolve performance bottlenecks and ensure timely scaling of resources.
• Set up monitoring and alerting systems to proactively catch issues before they impact users and maintain optimal system performance.
• Manage software deployments, patches, and upgrades for supported applications, ensuring minimal disruption.
• Collaborate with development teams to reproduce issues, gather requirements, and test solutions
• Document processes, create user guides, and deliver training to internal stakeholders.
• Proactively review and improve processes, tools, and practices to identify opportunities for enhancement.
• Stay updated with industry trends, new technologies, and best practices relevant to SRE and fintech.

Requirements

• A minimum of 5 years of hands-on experience in site reliability engineering, infrastructure management, or DevOps.
• Experience with Docker and Kubernetes for container orchestration and management and troubleshooting.
• Experience with at least one major cloud provider, such as AWS, Google Cloud, or Azure (preferable), with a focus on deploying and managing infrastructure.
• Solid understanding of networking principles, including DNS, TCP/IP, VPNs, and load balancing.
• Familiarity with CI/CD pipelines (preferably ArgoCD, Helm Charts, or similar DevOps tools) for automation of deployment and infrastructure processes.
• Strong background in Linux environments, including bash scripting for automation and troubleshooting.
• Experience with monitoring tools for altering and dashboards.
• Experience with Terraform for managing infrastructure as code is preferred.
• Azure Administrator Certification (or equivalent) and Certified Kubernetes Administrator (CKA) certification preferred.
• Strong willingness to continuously learn and adopt new tools, frameworks, and technologies as required by the job.
• A strong team player, with excellent communication skills, who strives for excellence and continuous improvement.

CIX is an equal opportunity employer committed to diversity and inclusion.

*We seek your understanding that only shortlisted candidates will be contacted.

Joining Razer will place you on a global mission to revolutionize the way the world games. Razer is a place to do great work, offering you the opportunity to make an impact globally while working across a global team located across 5 continents. Razer is also a great place to work, providing you the unique, gamer-centric #LifeAtRazer experience that will put you in an accelerated growth, both personally and professionally.

Job Responsibilities :

• Lead the development and packaging of new features and updates for Razer's Linux distro.
• Develop Linux applications and installers specific for Razer's Linux distro .
• Collaborate with cross-functional teams (e.g., product developers, system administrators, security engineers) to understand and address their needs in the distribution.
• Build and maintain an automated CICD pipeline for building and testing the applications and packaging for the distribution.
• Contribute to the upstream open-source community for projects relevant to the distribution.
• Stay up-to-date with the latest trends and advancements in the Linux kernel and distributions.
• Document processes and best practices for development and maintenance of the distribution.
• Troubleshoot and debug issues related to the distribution.

Pre-Requisites :

• Bachelor's degree in Computer Science, Engineering, or a related field.
• 5+ years of experience developing and maintaining Linux systems.
• Proven experience building and customizing a Linux distribution from scratch (e.g., Ubuntu, Arch, ) or significant contributions to existing distros.
• Strong understanding of the Linux kernel architecture and build system.
• Familiarity with packaging tools like APT, DPKG, RPM, Snap,Flatpak, etc
• Experience with scripting languages like Bash and Python.
• Excellent problem-solving and debugging skills.
• Strong communication and collaboration skills.
• Passion for open-source software and the Linux community.
• Familiarity with the Linux graphics stack and Vulkan API is a plus.

Preferred Qualifications

• Familiarity with containerization and sandboxing technologies, such as Docker or Podman.
• Experience with CI/CD pipelines for building and testing software.
• Experience with security best practices for Linux systems.

Role Purpose(s)

Analyze, design, develop and maintain of IT applications, including documentation and post-implementation customer support

Key Accountabilities

• Participate in the development, testing, and deployment of software updates, enhancements, and configuration changes, ensuring compatibility with the existing system without disruptions.
• Ensure all support requests and incidents are handled within the agreed service levels, prioritizing critical issues and effectively managing workload.
• Maintain up-to-date technical documentation, including DRS, troubleshooting guides, and known issues, and share knowledge with team members to enhance team efficiency.
• Ensure all maintenance activities adhere to security policies, compliance standards, and best practices to safeguard data and system integrity.

Job Responsibilities & Duties

• Analyze, design, program, test, document and maintain IT systems or applications
• Provide maintenance support to customers (internal and/or external) by investigating and rectifying reported systems shortcomings.
• Analyze requests for enhancements/changes and write amendment/program specifications.
• Update system documentation.
• Perform and manage stages of the SDLC/ Agile Development and participate in the systems review with Project Lead/Manager.
• Understand the interdependencies of the services (application, system and database) and able to pin-point problem areas accurately to improve overall efficiency.
• Design and document system design, architecture and propose appropriate technologies and tools required to implement systems; and ensure users sign-off on design specifications.
• Use development tools to develop applications for better productivity.
• Develop test cases, conduct SIT, load test and tune the performance of systems to meet SLA.
• Deploy systems to production and provide post-implementation support.
• Provide technical guidance to junior colleagues in their work.
• Keep abreast of technological advancement, emerging standards and new software or hardware solutions that may affect decisions about system builds or enhancements.
• Any other duties as and when assigned.

Key Accountabilities

• Customer Focus
• Results Oriented
• Organisational Awareness
• Manages Complexity

Education Requirements

• Bachelor’s degree in Computer Science, IT or related fields

Working Experience Requirements

• At least 5 years of experience in systems analysis, design, programming with knowledge of one or more of the following technologies:

- Java, Java EE

- Struts, JSF, Spring, EJB, Hibernate, IBatis

- Weblogic Application Server, Elixir, Oracle DB, LDAP, MQ Series

- JBoss Application Server, Apache Tomcat, ESB

- Oracle Database, SQL, PL/SQL

• 1 to 2 years experience in Agile Development and with a good understanding of Agile delivery. This is a must to have.
• Possess good experience developing Java EE web application and Java UI frameworks
• Certifications in Java, Java EE etc preferred.
• Some project leading experience in IT will be an added advantage

Skills Required

Must-have skills

• Java
• SQL

Preferable skills

• MQ series
• EJB
• Weblogic Application

CrimsonLogic is proud to be an equal opportunity employer. We hire talented and passionate people of all backgrounds and create an inclusive workplace for all employees to develop and build their career with us.

• Position : M&E Coordinator (A&A Industry) - Up to $6,500 - All Welcome
• Location : Based on Project Sites
• Working hours : Monday to Saturday | 8am to 6pm (Saturday working hours based on site)
• Salary (commensurate with experience) : Up to $6,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Assist M&E Manager in coordinating M&E specific works on site.
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing OA/QC inspections to meet wi construction schedule.
• Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices.
• To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendor
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance to daily site co-ordination meeting and provide detail co-ordination with sub contractors.

Requirements:

• Minimum of Diploma in M&E Engineering or relevant; with at least 3-5 years of experience.
• Willing to work on weekends if site required.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job

listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : Safety Manager (WSHO/Construction/6 Days Work) - Up to $9,000 + Bonus
• Location : Island-wide
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $9,000 + Performance Bonus + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Ensure compliance to corporate EHS policy, implement actions to drive compliance and improvements to maintain EHS Management Systems
• Review any statutory updates, identify relevant EHS requirements, prepare procedures towards achieving compliance to the new statutory requirement
• Lead and facilitate compliance, EHS internal audit / surveys
• Organize and lead regular EHS inspections, meetings and monitoring of corrective / preventive action
• Develop procedures, programme to maintain compliance
• Review new process and lead risk assessment relevant to the new process
• Responsible for corporate EHS reporting requirements
• Lead incident and accident investigation, follow up on effectivenees of implemented action
• Plan EHS training programme to increase safety awareness
• Coordinate and work together with all departments, clients and contractor/vendors to advise on all EHS related issues
• Promote zero accident culture in the company to strive group EHS KPI targets

Requirements:

• Bachelor Degree in Engineering or Health and safety related disciplines with minimum 6 years working experience in Civil & Building Construction Industry / 3-5 years experience in Bored Piling Works
• Possess valid MOM registered WSHO, NEA registered ECO and PUB
• Certificate in BizSafe level 2 Risk Management or equivalent
• Possess class 3 driving license
• ISO 9001, ISO 14001 and ISO 4500

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Key Responsibilities:

• Partner with multidisciplinary teams to craft, build, and launch top-tier software applications, spanning mobile and web interfaces, as well as corresponding backend systems.
• Advocate for and implement industry-leading software development methodologies, including collaborative coding, peer review, and test-driven development.
• Spearhead technical forums, design system architectures, and coach team members to cultivate expertise and excellence.

Requirements:

• A minimum of 5 years of experience as a full-stack developer, with a demonstrated history of delivering high-performance, scalable solutions.
• In-depth knowledge of modern web development frameworks, including ReactJS, NextJS, TypeScript, and Kotlin/Java.
• Skilled in designing, implementing, and managing continuous integration and delivery pipelines, with expertise in deploying applications on cloud-based platforms such as AWS.
• Familiarity with database migration tools and techniques is a plus.
• Experience working in Agile/Scrum environments is also desirable.
• Excellent verbal and written communication skills, with the ability to clearly articulate complex technical concepts.
• A self-driven and proactive individual with a strong passion for innovation and continuous improvement.

We regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

Data provided is for recruitment purposes only

EA Registration Number: R21102607

Business Registration Number: 201735941W

Licence Number: 18S9037

http://www.dadaconsultants.com/

—------------

EA License number : 20S0283

EA Personnel : R1332294

Job Description & Requirements:

• Review of civil & Structural working drawings and shop drawings in connection with SEM and steel structure shop drawings during pre-construction phase to prepare construction methods, identifying risks to promote strategies and alternative methodologies to mitigate.
• Organizing regular meetings with the sub-contractor's technical teams to resolve technical problems in pre-construction and construction phase.
• Working closely with Design team and LTA/QPS (client) to resolve execution issues with appropriate functional proposals with an aid of presentation or sketches.
• Preparing method statement for construction working including RA and SWP.
• Prepare of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspection with QP.
• Reviewing of rebar BBS prepared by sub-con in compliance with standards and shop drawings roof slabs, steel structures and corbel details for precast installation.
• Site Supervision of construction of structures such as pile cap, undergrounds tanks, base slab, column (~12m high) including corbel, RC beams, Capping beam, RC and PC beam connections, ramps, steel and RC struts, hanging sumps and staircases.
• Reviewing and site supervision of surface water drain and waterproofing shop drawings and site work.
• Assisting construction manager for plannning and preparing daily progress reports
• Tracking and optimizing manpower for each works
• Preparation of conceptual drawings for steel decking or other temporary structures required on site and reviewing shop drawing submitted by sub-con and supervising site installation.
• Reviewing concept drawings and supervising installation of bracing connections between permanent plunge-in-columns for top down column construction.
• Reviewing sub-con's shop drawing for steel strut and supervision of installation work.

JOB DESCRIPTION (ROLES AND RESPONSIBILITIES)

• Perform route mapping and navigation testing
• Assists in setting up the servers and other peripherals needed for robot operations
• Execute hardware and system upgrade or modification
• Provide technical support to the Service Team for Tier 3 - Software and System issues whenever necessary
• Conduct training to the Product Operators and Service Team for the newly setup system, equipping them with product operations and basic troubleshooting knowledge
• Coordinates with stakeholders, ensuring effective communication and providing regular progress reports
• Escalate higher level issue whenever necessary
• Prepare and submit relevant Operations documents as needed
• Execute ad hoc tasks on behalf of the Robotics Operations Team as needed

SKILLS AND QUALIFICATIONS

• Diploma, Bachelor’s or Associate’s degree in Mechanical/Electrical/Computer Engineering or other related fields
• Proven relevant work experience of at least 2 years
• Strong background in Autonomous Mobile Robots (AMR) and Automated Guided Vehicles (AGV)
• Familiarity in mechanical/electrical hardware installation, setup and troubleshooting
• Familiarity in system/network installation, setup and troubleshooting
• Familiarity in AutoCAD, ElcoCAD and any other design and planning software
• Familiarity of LINUX (Ubuntu) System and software troubleshooting will be an added advantage
• Ability to read and interpret mechanical / electrical prints and other related technical documentation
• Strong working knowledge of equipment, tools and components used in the industry
• Proficiency in using computers and basic applications such as MS Word, Excel and Powerpoint
• Ability to work independently and remain professional under pressure
• Ability to clearly communicate with colleagues and end users

ADDITIONAL REQUIREMENT

• Willing to travel locally in a short notice
• Comfortable to work overtime as needed
• Willing to be deployed overseas as needed

Job Descriptions

• You are required to perform checks, prepare quality reports, and lead regular meetings with Clients, Consultants and sub-contractor.
• Responsible for establishment and implementation of Project's quality control system for MEP services construction activities executed by direct hire and subcontractor personnel.
• Supervise inspection activities performed by Quality Control (QC) and Field Engineers, in accordance with the Project Construction QC Plan.
• Supervise and coordinate the inspection and testing activities performed by Material Testing and Inspection subcontractor.
• Perform Quality Audits on office and site records.
• Monitor the progress and effectiveness of the project quality management system.
• Recommend and implement improvements when required.
• Ensure construction process implementation as per approved methodology & correct testing procedure as per approved ITP.

Requirements

• Minimum 5 year experience of Quality Control matters.
• LTA Project Experience is preferred

Job Descriptions

• Plan, schedule and manage of all aspect of utilities coordination related works.
• Coordinate and communicate with various stakeholders, including but not limited to design consultants/engineers, other departments, project representatives from clients, statutory / authority agencies etc. to set the requirements for work deliverables and engineering works that must be submitted.
• Manage and monitor progress, quality of workmanship and ensure that it complies with authority requirements.
• Highlight any discrepancies and advise the staff on the interfacing of utility services and related works.
• Coordination with other disciplines to guarantee that designs meet other infrastructure requirements.
• Perform all duties in accordance with company policies, processes, systems, and procedures.

Requirements

• Minimum Degree in Mechanical or Civil Engineer with at least 3 years of underground utilities matter.
• LTA Project Experience is preferred

Job Title: Architectural Engineer

Occupation: Architectural Engineer

Duties and Responsibility:

→LTA A&A Experience (Must)

→Minimum 5 years relevant experience in supervision of architectural works in building construction

→Handle technical and engineering problems

→Plan and execute work schedule based on contract schedule

→Coordinate and control construction works on site

→Evaluate subcontractors’ risk assessment, safe work procedures and method statements

→Review subcontractors/supplier performance after completion works

→Well-versed in Construction Method Statements

→Manage Piling, Excavation, ERSS, RC, and Architecture work

→Preparing the site and liaising with other construction professionals before construction work starts

→Developing the program of work and strategy for making the project happen

→Planning ahead to prevent problems on site before they occur, planning the delivery and storage of equipment and materials

→Making safety inspections of the site when work is underway and ensuring regulations relating to health, safety, and the environment are adhered to

→Ensure progress of work is within budget & timelines as well as quality & safety objectives

→Well-versed in construction sequence, principles and LTA regulatory requirements

→Good leadership skills

→Good communication and interpersonal skills

→Great team player

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• Become the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Se expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Bachelor Degree in Electrical / Electronics / Chemical / Mechanical /Microelctronics Engineering
• Min 5 years of relevant work experience in Photo Equipment (Track) in semiconductor industry
• Excellent communication, interpersonal and leadership skills
• Strong analytical skill and able to work under pressure in fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, Power BI

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in Etch tools / equipment (AMAT / Mattson)
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

About the Role:

A team member of RRC (Regional Repair Center) and will be responsible to perform repair of medical endoscopes in RRC. He is also responsible to strictly adhered to the process, safety and quality standards required to repair medical equipment. He also has responsibility to maintain the proper condition of repair workbench as assigned.

Roles and responsibilities:

· Perform repair of medical endoscopes

· Carry out workshop maintenance task assignments

· Ensure compliance with GDPMDS requirements at all times

· Perform 5S in individual and scope repair areas at all times

· Any other duties as assigned

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

· A competitive salary package including AWS and Variable Bonus

· 18 days of annual leave in your first year

· Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

· Diploma or ITE in Engineering / Biomedical Engineering

· More than 3 years of Medical Equipment service provision

· Personality: Team Player, meticulous and organized

· Traits: Steady hands and keen eyes to handle delicate components

· Electrical & Mechanical soldering skills

· Require critical thinking and problem solving skills

· Good with Microsoft Office

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

Position Overview:

The Principal Electronics Engineer is a senior leadership role within EOS Defence Systems (EOS DS) and is responsible for solving problems using disciplined engineering techniques (e.g., software, mechanical, electronics, system, testing, project etc) to assure and advise on the development and/or delivery of products. The Principal Electronics Engineer possess deep technical and industry knowledge with the ability to influence and guide company direction, ensuring strategic alignment. The Principal Electronics Engineer is also responsible for developing products and designs that support the product development and product goals of EOS DS.

The Principal Electronics Engineer will lead and mentor engineers, up to and including Senior Engineers. They may provide technical assistance to multiple teams and provide a high level of support to those teams. In consultation with senior leadership, suggest staffing and workflow priorities and monitor and manage performance, health and wellbeing.

The Principal Electronics Engineer will have extensive engineering experience across the product lifecycle in a Defence environment, allowing them to provide leadership across engineering teams and execute technical authority as allocated.

Primary Duties:

Specific Functions & Tasks

• Provide necessary guidance and direction to produce electronics designs and analysis that satisfy defined product development requirements in the specified time frames and exercise allocated technical authority.
• Work with systems engineers to ensure all requirements are identified, captured and analysed.
• Lead conceptual design and schematic capture of complex electronic circuits.
• Ensure test and evaluation activities on electronics and system designs are undertaken to verify and sign-off of all design requirements.
• Initiate and/or participate in planning on electronics designs.
• Develop, review and champion the electronics engineering process within EOS DS.
• Ensure the preparation and review of all documentation to support designs.
• Perform conceptual, preliminary and detailed design of complex electronics assemblies.
• Simulate analogue and digital circuits.
• Document designs including calculations, design options and decisions.
• Prepare for and contribute to design reviews.
• Perform test, evaluation, characterisation, verification & validation of electronic subsystems in collaboration with test engineers.
• Prototype electronic circuits, wiring harnesses and other systems.
• Work closely with other engineering disciplines to ensure cohesive and complete electronic designs are delivered on time and on budget and meet project requirements.
• Apply DFx principles (manufacturability, testability, excellence).
• Review work and provide guidance and mentorship to Senior Electronics Engineers.
• Engage key stakeholders and subject matter experts across technical engineering and specialty areas to understand the concept of operations and user needs to elicit and decompose electrical requirements.
• Adhere to and ensure understanding and compliance with company procedures to achieve a safe and secure work environment.
• Other duties as required.

Strategy and Architecture

• Contribute to and influence strategy for emerging, new, and current technologies, products, services within Defence Systems and have authority over and accountable for the innovation and delivery practices required to assure the implementation of this strategy.
• Assess and ensure a high level of leadership and deep industry, defence system knowledge and systems engineering best practice to maintain competitive advantage, exploit EOS DS technologies and minimise exposure and risk.
• Communicate, advocate and influence persuasively through effective negotiation and communication while fostering an environment of innovation, learning and continuous improvement within and outside the organisation.

Development and implementation of Engineering

• Self-initiated and managed under broad direction and governance to be responsible for demonstrably leading self and others to produce designs and products that satisfy defined requirements in the specified time frames and meet group objectives.
• Undertake cohesive best practice designs and analysis and develop efficient work practices to support product development activities and business outcomes.
• Lead and work collaboratively with engineers across functional teams to solve complex problems as a team and ensure all requirements are identified, captured, and analysed such that the design/product can be developed that satisfies the safety, quality, policy, legislative and design authority requirements.
• Undertake clear and pragmatic tests, evaluation, and verification activities on integrated system designs and prototypes to verify and provide recommendations for sign-off of all design/product requirements to the Chief Engineer and Design Authorities based on relevant legislative requirements, standards, and contracts.
• Prepare and review all documentation required to support designs and provide tailored advice and recommendations to teams and decision makers.

Relationship and engagement

• Actively listen, share knowledge and experience, provide guidance and mentorship, and work collaboratively to mobilise teams across engineering and other relevant internal and external customers to deliver engineering and business outcomes.
• Work with Production Engineers and Technicians to ensure the best design solutions are delivered to solve production problems and obtain business outcomes under the broad direction of the Chief Engineer.
• Support the leadership alongside with the EOS Executive, Project Managers, and Project Engineers to ensure design solutions are delivered on time and on budget and meet other project management requirements.
• Communicate insights and provide thorough engineering judgement for progress and the advancement of engineering solutions.
• Apply interdisciplinary, collaborative approach to requirements including analysis of functional and non-functional requirements and functional performance specifications to develop effective solutions.

Delivery and operation

• Guide the design and execution of user acceptance testing and other verification activities to provide recommendations to the Chief Engineer and other Design Authorities.
• Support production and review manufacturing and supplier requirements to meet specified timeframes, engineering standards, and business outcomes.

People and skills

Work in cross functional multidisciplinary teams to enable self and others to solve engineering problems and implement solutions.

Key Attributes:

• Ethical Leader.
• Influencer.
• Deep Technical knowledge.
• Problem solver.
• Engineering judgement.
• Details oriented.
• Works Collaboratively.
• Insightful.
• Communicates well.
• Inventive.
• Solution orientated.
• Team builder
• Uses experience for sound judgement