Job Description

· Handle Account Receivable and Payable

· Prepare Supplier Payment and staff reimbursement

· Reconciliation with suppliers and customers

· Prepare bank reconciliation and audit schedule

· Planning Cashflow

· Month-End Closing

· Journal Entries

· Handle Petty Cash

· Fixed Assets register and prepare depreciation

· GST submission

Requirement

• Must be strong in administrative support/ skills
• Able to work independently, dynamic with initiative within timeline
• A good team player and able to multi-task effectively with minimum supervision
• Knowledge of Autocount software is an added advantage
• Required skill(s): MS Office, MS Word.
• Able to communicate in both English & Chinese (to liaise with associates)

Responsibilities

• Responsible for troubleshooting, calibration, repair and maintenance of assigned testers & probers platform.
• Ensure equipment is in production condition with minimum downtime and running at yield specified.
• Responsible for tracking, monitoring and reporting of daily equipment downtime.

Requirements

• Diploma / NITEC in Electronic / Electrical / Mechanical / Mechatronics Engineering or equivalent.
• Entry level candidates welcome to apply.
• Possess strong analysis and report to engineering team.
• Able to commit to 12-hr day / night shift.

Responsibilities:

• Prepare the full set of accounts including AP, AR and reporting
• Prepare invoices, trace client payments and monthly bank reconciliation
• Assist with tax filing matters including GST and income tax
• Assist in all HR matters such as work pass matters, recruitment process and monthly payroll
• Handle all worker-related matters e.g. arranging for accommodation, training, flight tickets, insurance, IR21 etc.
• Maintaining and organizing office records and files
• Handling of incoming calls and email enquiries
• Provide administrative support to the operation team in office & on site
• Perform daily and ad-hoc administrative tasks as assigned

Requirements:

• Minimum of 2 years of accounting and HR experience
• Proficient in Microsoft Office
• Must be able to communicate in English and Chinese
• Good communication skills
• Willing to learn

• AUTO CAD Drafting for building & Steel Plate NESTING
• Have a good knowledge in CAD MATIC.
• Preparing Engineering Drawings and steel weight checking.
• QA / QC Document controller.
• Have a good knowledge in M.S OFFICE.
• Material taking off for fabrication.(MTO)
• -Preparing Dimensional Reports

• Checking and inspecting the quality of works during construction.

• Checking actual construction according to drawings and specifications.

• Coordinate with the clients for whatever revision on drawings and in

actual Construction and Submit weekly site works progress report to

the client.

• Project Planning.

• Materials and Resources Forecasting and Procurement process.

• Execution of the Entire Building’s Structures and Finishes with Project

Team for smoothing the work progress.

.Office Administrator works

Job Title: Facilities Engineer (Electrical)

Location: Tampines

Working Days: Monday - Friday

Working Hours: 8 am to 5.30 pm

Basic Salary: Up to $4000-5000

Benefits: AWS, Quarterly Bonus, Annual Leave, Company Transport

Job Description:

• Maintenance of building infrastructure, exterior and interior
• Repair and maintenance of building fittings and fixtures
• Maintenance of lifts and cranes
• Coordination and management of contractors
• General upkeep of buildings and surroundings

Requirements:

• Degree or diploma in mechanical/electrical engineering
• Minimum 3 years experience in building maintenance
• Basic knowledge of mechanical and electrical

WONG MENG KANG

SuperformConsulting Pte Ltd

R1988500/15C7536

Job Title: Manufacturing Engineer

Location: Tampines

Working Days and Hours: 12 hours,4-3-3-4 Perm Night shift

Working Hours 8 pm-8 am

Basic Salary start from $3500 to $4,000

Shift Allowance: Night Shift $30

Benefits: AWS, Quarterly Bonus, 14 Days Annual Leave, Company Transport

Responsibilities

• Led a team of line leaders and operators to meet daily production output, quality, productivity and yield.
• Conduct daily pass-down meetings and escalate line issues if any
• Oversee manpower/overtime and consumables planning
• Ensure manufacturing and safety procedures are being followed
• Conduct training/coaching to leaders & operators to improve performance
• Implement ideas and improvement activities to prevent human errors
• Ensure good discipline and housekeeping in the line
• Coordinate with other departments to support projects, evaluations and preventive maintenance activities in the fab

Requirements

• Diploma/Degree in Engineering/Science/Production/IT
• Preferably experienced in high-tech, high-vol manufacturing environment
• Good leadership and communication skills
• Willing to work 12-hour shifts (day or night)

WONG MENG KANG

Superform Consulting Pte Ltd

License No.: R1988500/15C7536

Job Title: Facilities Engineer (Electrical)

Location: Tampines

Working Days: Monday - Friday

Working Hours: 8 am to 5.30 pm

Basic Salary: Up to $4000-5000

Benefits: AWS, Quarterly Bonus, Annual Leave, Company Transport

Responsibilities

• Responsible for the operation and maintenance of Electrical systems
• Continuous performance monitoring and ensuring the highest uptime
• Project coordination for new equipment installations
• Troubleshooting system abnormalities and providing technical solutions
• Initiate continuous improvement projects
• Manage external contractors and vendors and maintain safety standards

Requirements

• Degree in Electrical Engineering or related fields with min 2 years experience
• Experience in the operation and maintenance of Transformers, LV, MV switchboards, Motors, Frequency converters, and power distribution
• Experience in project installation of electrical distribution
• Able to study protection circuits, single-line drawings, and control circuits
• Knowledge of UPS systems, low voltage systems like CCTV, PA, and network systems

WONG MENG KANG

SuperformConsulting Pte Ltd

R1988500/15C7536

• Support Project Director/Manager on-site.
• Coordinate repairs and supplies.
• Issue material requests for site use.
• Manage paperwork and correspondence.
• Maintain attendance and inventory records.
• Schedule meetings and events.
• Assist Project Director / Project Manager on site

Requirements

• Previously experience at HDB/LTA site offices would be an advantage
• N/O level , Diploma or Degree in any field
• Willing to work at site office environment
• Good communication skills
• Effectively bilingual

Job Descriptions

• Conduct briefing to team regards to production matters or any information that is required by the Management
• CNC programming & tool setting
• Ensure Production machine are at its optimum production capacity
• Troubleshoot on machine maintenance and repair (e.g software and electrical)
• preventive maintenance prerequisites on mechanical equipment like motors, conveyors, production machines, pneumatic tools and engines thereby ensuring smooth operation of such machinery and mechanical gadgets.
• ensuring the maintenance of production and quality by guaranteeing the operation of mechanical equipment and machinery.
• Planning and prioritizing operations to ensure maximum performance and minimum delay
• Achieve efficient quality and quality target and ensure on-time delivery to customers
• Hands on troubleshooting for production matters
• Identify & resolve technical and operational issues as well as identify potential issues and work with all team to implement proactive measures to accomplish operational objective
• Develop, recommend and monitor corrective and preventive actions and prepare reports to communicate outcomes of quality activities

Requirements

• Diploma and above in Engineering - Mechatronics, electrical, Mechanical, Process, Manufacturing or equivalent
• Minimum 2-4 years of experience in CNC machine and programming
• Proactive, strong analytical and problem-solving abilities and able to work well in a fast pace environment.
• Proficient in English & Mandarin to handle queries, concerns and issues in regards with the production matters.

Our Workshop at Sungei Kadut services a fleet of 300+ tipper trucks for maintenance and repair.

• Assist with filing and compiling job card monthly and prepare necessary documentation for approval
• Daily updating of servicing Job Card using SAP/VRS
• Data Entry through SAP on vehicle repair schedule and repair status
• Office documentation and data control
• Assist Operation Team to extract data or SAP report as and when
• Preparing trip report, summary report and accident report monthly
• Coordinating and reporting to superior for Department’s Workplace Safety & Health issues

Transport can be arranged from Yew Tee MRT.

Note: In 2 years the workshop in Sungei Kadut will move to Jalan Papan

Location: Woodlands

Mon to Fri 8.30am to 5.30pm

Industry: Semicon Manufacturing

Salary: $3000-$4500

Job Description

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Issue and closure of CAR for customer (RMA) and Supplier issue – External
• RMA receipt and disposition of RMA in Macola – External.
• Work with QA department and Engineering on customer related issues e.g. RMA

Requirements:

• Degree / Diploma in Engineering (Electrical Engineering, Mechanical Engineering, etc).
• Knowledge of CMM, profile projector, and measuring equipments.

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Roles & Responsibilities

Job Descriptions:

· Manage and prepare the measurements and cost estimates for the construction projects from start to the end of the project

· Contract administration - Prepare contract documents in accordance to the regulations, sourcing for suppliers and Sub-contractors for quotation.

· Prepare cost analysis and monitor project to ensure the objectives of the project is achieved.

· Prepare tenders and quotations, progress claims and subcontractor's payments.

· Co-ordinate with the project management team, sub-contractors for pre and post contract matters and keep track of the progress of the project.

· Any other adhoc tasks assigned by superior.

Job Requirement

· Min. Diploma/ Certificate in QS/ Civil Engineering/ Building/ Construction Management or equivalent with 2-3 years of relevant experience in Construction industry

· Self-motivated, good communication, Negotiation and interpersonal skills

· Able to work independently and work under pressure

· Able to multitask and meet deadlines

Job Responsibilities:

1. Clean and sanitize office spaces, including restrooms and common areas.
2. Dispose of trash and recyclables
3. Monitor and replenish cleaning supplies.
4. Prepare and serve beverages to staff and visitors as required
5. Keeping pantry areas neat and tidy
6. Other adhoc duties associated with maintaining cleanliness

• Working Hours: Monday to Friday (7.30am to 4.30pm with 1hr break)
• Salary: $1,800

• Reports to Construction Manager
• Review traffic layout plans
• Assess public feedback and develop traffic scheme design
• Laisse with consultants, contractors, advisors/grassroots leaders on external projects
• Prepare/plan Temporary traffic management scheme for temporary traffic diversion works
• Prepare reports on road conditions before and after traffic diversion.
• Ensure the activities comply with the quality, environment, health & safety requirements

Job requirements:

• Bachelor’s Degree in Civil engineering or equivalent
• Minimum of 3 years relevant experiences related to Traffic Engineering jobs
• Experience in LTA projects traffic management & traffic diversion works
• Technical expertise and knowledge in traffic/road diversion jobs
• Proficient in different stages of traffic diversion works
• Proficient in Microsoft Office and can use Auto CAD
• Attained CSCPM/BCSS certification
• Good interpersonal skills
• Hardworking and willing to learn
• Location : Woodlands
• Project : Viaducts

• Report to Precast yard Manager
• Responsible for All Precast segments casting work
• Responsible Precast Mould Assembly
• Profiling of Precast Segment Rebar and Post Tensioning Duct
• Preparation of Pre and Post Tensioning Calculation
• Ensure the quality of work as per the approved standard
• Assure that work is done according to safety work practices
• Post Tensioning Duct Layout and Profile works
• Coordinate with site Engineer and supervisor
• Assist with Senior Engineer and attend internal meetings

Job Requirements:

• Degree in Civil Engineering or equivalent
• At least 2 years of experience in civil engineering projects, inclusive of relevant experience in precast yard or fabrication yard
• Experienced in the fabrication of segmental box girder for viaduct, precast mould assembly & repair, and/or similar projects is preferred
• Knowledgeable on the applicable standards for the casting works
• Location :Woodlands
• Project : Viaducts

• Reports to the Construction Manager
• To ensure that day to day lifting operations are monitored at an appropriate level.
• Plan, organize, supervise and liaise closely with sub-contractors and operation teams on all ongoing lifting activities.
• Perform routine checks and inspections on site to ensure the compliance with authorities’ requirements.
• Address to concerned party regarding the safety of any lifting operations
• Provide reports to construction team regularly
• Liaise closely with HSE team to ensure operations comply with safety standards

Job Requirements:

• Degree in Civil Engineering or equivalent
• Minimum of 5 years’ experience in the construction field; inclusive of 3 years’ experience in construction and supervision for vehicular structures and road projects (LTA Road / MRT / Viaduct)
• Technically expert and highly knowledgeable in lifting of heavy structures
• Candidates with previous experiences in LTA Projects are preferred
• Attained IES/SHETC Appointed Person for Lifting Operation certification is mandatory for this position
• This position require to perform night lifting works when necessary
• Location : Woodlands
• Project : Viaduct

• Reports to the Project Director
• Lead a team of design engineers/drafters to ensure smooth workflow
• Review all structural design-related matters with Client(LTA) / Authorities / Design consultant / Subcontractor
• Prepare and submit all design deliverables to LTA
• Provide advice to the construction team, and highlight potential design risks to all stakeholders

Job requirements:

• At least a Master Degree in Civil Engineering or equivalent, recognized by the PE Board, Ph.D. is preferred
• Minimum 10 years of relevant project experience in civil design for A1 MNC construction firm; inclusive of 5 years in a managerial role
• Candidate should possess experience in the design of vehicular structures and road projects of similar scale & complexity to our project
• Technical expertise and knowledge in bridges, concrete structures, and viaduct design are essential for this position
• Proficient with all stages of the development cycle for Design and Build projects.
• Strong background in project management
• Excellent interpersonal & leadership skills
• Location : Woodlands
• Project : Viaducts

• Report to Team Manager/ Senior Staff/Engineer.
• Preparation & Submission of documents to client.
• Filing of documents.
• Keeping updated documents in the archive.
• Data entry for related records.
• Ad hoc duties as assigned.

Job requirements:

• Minimum Higher NITEC/NITEC certification in related studies
• At least 1 year experience of any office works
• Fresh graduates from school are welcome to apply
• Proficient in MS Office
• Able to work independently and as a team.
• Good communication and interpersonal skill
• 5.5 working days each week
• Project : Viaduct/Infrastructure
• Location: Woodlands

• preferable with minimum 2 years working experience in building construction
• Diploma or Degree gratuated in Quantity Surveyor certification
• assisting tender department with preparing tender documents, contracts, budgets and other documentation
• fresh gratuates are welcome
• able to work independtly with tender departments

How Will You Make an Impact at Thermo Fisher Scientific?

Joining Thermo Fisher Scientific means being part of a team dedicated to significant work. You'll find opportunities for growth and learning in a culture that fosters development. Our inclusive, global environment celebrates diverse talent, backgrounds, and experiences, contributing to our goals of speed, efficiency, innovation, and growth.

Our extensive product and service range, from cutting-edge instruments to essential lab supplies and life-saving medicine, is trusted by customers worldwide. Thermo Fisher Scientific offers you a chance to be part of a world-class team, working in manufacturing to create products that make the world healthier, cleaner, and safer.

Continual growth and learning await you here, backed by our $40+ billion revenue and industry-leading R&D investment. Be part of a team that makes substantial contributions to the world.

Your Role:

We are seeking a highly skilled and experienced Manufacturing Process Engineer II to join our team, with a specialization in MES Camstar. This role is crucial for driving process improvements, lean transformation, and simplifying manufacturing processes through effective integration and optimization of MES Camstar. The ideal candidate will be adept at utilizing lean manufacturing principles to enhance efficiency, reduce waste, and contribute to the overall productivity of our manufacturing operations.

Key Responsibilities:

• MES Camstar Implementation and Optimization:
• Serve as the primary engineer for the implementation, configuration, and optimization of MES Camstar solutions.
• Ensure MES Camstar integration aligns with manufacturing processes to enhance operational efficiency and data accuracy.
• Conduct regular system audits and updates to maintain optimal performance of MES applications.
• Lead lean manufacturing initiatives to streamline workflows, reduce waste, and improve process efficiency.
• Apply continuous improvement methodologies, such as Kaizen, Six Sigma, or 5S, to drive process enhancements.
• Collaborate with cross-functional teams to identify bottlenecks and implement effective solutions.
• Analyze current manufacturing processes to identify complexities and redundancies. Propose and implement strategies to simplify these processes.
• Facilitate the integration of new technologies or process changes, ensuring minimal disruption to production.
• Develop and maintain detailed process documentation to support training and process standardization.
• Work closely with IT, production, quality, and maintenance departments to ensure seamless integration of MES Camstar with existing processes.
• Provide training and support to end-users, ensuring they are proficient in using the system and understanding the processes.
• Communicate effectively with all levels of the organization to report progress, results, and future plans.

Education:

• Bachelor's degree in Engineering (Industrial, Mechanical, Electrical, or related field).

Qualifications:

• Minimum of 3 years of experience in a manufacturing process engineering role, with a strong focus on MES, preferably Camstar.
• Proven track record of implementing lean manufacturing principles and achieving tangible improvements.
• Solid understanding of manufacturing processes and systems integration.
• Excellent problem-solving skills and the ability to manage complex projects.
• Strong communication and interpersonal skills, with the ability to work effectively in a team environment.

Job Description:-

• Responsible for the planning, supervision and monitoring of work progress at project site
• Carry out formwork and rebar supervision at site
• Ensure that projects are completed on time, within budget and meet all safety standards and client's requirement
• Take site measurement
• Review project specifications, technical clarifications and construction drawing
• Liase with Main Contractor

Requirements:-

• At least three years of working experience
• Meticulous with good communication, interpersonal and leadership skills
• 6 days work

Responsibilities:

• Communicate and coordinate with suppliers, customers, and internal department, to meet objective and requirements, plan, monitor and control the project, including carrying out implementation of the project
• Responsible for conceptual and detailed design for standard and customized build automation/equipment such as material handling, process automation,fixturing, and tooling.
• Hands-on prototype assembly, testing, and qualification inclusive of troubleshooting.
• Prepare cost estimation, budget, control report and other technical documentations when required
• Hands-on and assist in the factory manufacturing, installation, buyoff, supporting of projects internally and at customer sites, and other technical activities when required
• Assist in monitoring of projects, prepare reports on project progress and ensure project schedule is being met
• Prepare design, details and assembly drawings by using Solid Work, Auto CAD or equivalent software
• Resolve and escalate cross-functional technical issues for projects

Requirements:

• Diploma/Bachelor's degree in Control and Automation / Mechatronics / Computer Science / Electrical Engineering or relevant field
• Minimum 2-3years experience in handling and designing automation machine
• Ability to identify problems and resolve them in a timely manner
• Knowledge of ISO 9001, ISO 17025 and BizSafe

Location: Woodlands

Mon to Fri 8.30am to 5.30pm

Industry: Semicon Manufacturing

Salary: $3000-$4500

Job Description

• Manage customer complaints, corrective and preventive action programs.
• Work closely with customers, production and suppliers to meet the quality requirements.
• Responsible for product quality management, implement quality plans, drive quality improvement projects and prepare quality report to identify problem areas and work on problem resolutions
• Interface with and handle customers/vendors on quality issues.
• Issue and closure of CAR for customer (RMA) and Supplier issue – External
• RMA receipt and disposition of RMA in Macola – External.
• Work with QA department and Engineering on customer related issues e.g. RMA

Requirements:

• Degree / Diploma in Engineering (Electrical Engineering, Mechanical Engineering, etc).
• Knowledge of CMM, profile projector, and measuring equipments.

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Roles & Responsibilities:

• Assist Project Manager in planning, execution and completion of ACMV Project.

• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively.

• Supervise and liaise with relevant authorities / subcontractors / workers at site and ensure work performed on-site complies with local authorities’ requirements.

• Analyze, manage and track project costs against budget.

• Any other tasks assigned by the management.

Job requirements:

• Degree/Diploma in Mechanical Engineering or its equivalent

• Work experience in ACMV or Mechanical Engineering in the construction industry.

• Good technical knowledge of ACMV system for Commercial Project.

• Good communication, interpersonal and problem-solving skills

• Possess Class 3 license.

*Salary is commensurate to working experience.

Please indicate the below information in your resume:

o Current & expected salary

o Reason(s) for Leaving

o Availability to commence work

We regret that only shortlisted candidates will be contacted.

• Responsible for the implementation and monitoring of Workplace Safety & Health and Environment Management Systems at work sites.
• Conduct regular WSH inspections and follow-up actions to ensure safety compliance.
• Ensure all Health & Safety policies, procedures, rules and regulations are adhered to and are regularly reviewed, updated and communicated.
• Ensure the Company meets its statutory obligations in all areas pertaining to health, safety and welfare at work, including statutory training and reporting.
• Ensure the completion and regular review of risk assessments for all work equipments and operations.
• Ensure all accidents are documented, investigated and recommended improvements implemented.
• Coordinate the development of health & safety policies, systems of work and procedures.
• Inspect project sites to ensure safety measure are being carried out at all times.