As a Wet Chemical and Specialty Chemical Global Supplier Quality Engineer, you will be responsible to support the overall metrological alignment strategy, execution plans and excursion prevention programs to develop Suppliers through Continuous Improvement Programs to ensure advance metrology is constantly applied to materials procured materials/services to Micron. You will work in close partnership with key stakeholders such as Global Quality, Global Procurement, Global Manufacturing Central Team (MCT), Operations, Product Engineering and R&D to develop, execute and measure the effectiveness of Supplier Programs.

In addition, you will support Supplier Performance Reviews to ensure suppliers receive timely and accurate supplier performance feedback based on consistent metrics and that the expectation of continuous improvement is understood and realized. The position will be reporting to Principal Lead, Front End Supplier Engineer.

Role Responsibility and Tasks

1. Development Phase - Sourcing, Selection and Qualification Phase

• Drive Wet Chemical and Specialty Chemical Quality risk assessment and ensure all risks are mitigated to support Fabs qualification activities.
• Participate, support, and recommend from quality perspective on global sourcing and segmentation strategies, including business continuity, benchmarking, new markets, request for quotation (RFQ)/ request for information (RFI), sourcing, selection, cost savings and other analytics.
• Lead technical risk assessment audit for new supplier/ material engagement or qualification to assess their capability and readiness for High Volume Manufacturing (HVM).
• Set up, communicate, and ensure suppliers understood and comply with Micron Supplier Requirements Standards (SRS).
• Support cross fab technology transfer activities in terms of new technology Bill of Materials (BOM) and driving global specifications alignment.
• Collaborate with Suppliers on their outgoing analysis capability to align Best-In-Class (BIC) method detection.
• Align and guide Suppliers to aligned Fab’s advance technology needs which include but not limited to:Study BIC test analysis method and align with Supplier with the collaboration with site Chem Lab to support manufacturing needs (FOAK eval, routine quality monitoring, troubleshooting, improvements, etc.).
  Align, correlate, document with suppliers on lab methods / tools / practices and target to achieve low detection at ppq level contamination.
  To provide a platform for technical or knowledge sharing for SQE team.
  Conduct Regular Technical Meetings with Suppliers on metrology CIPs.
  Conduct constant look out of advance chemical analytical equipment and technology, work with internal site/supplier on results correlation and deploy into CIP with suppliers in compliance to advance technology
  Conduct research for ≤ 10nm particle detection and work with internal site/supplier on results correlation, and deploy into CIPs with suppliers in compliance to advance technology
  Lead Suppliers towards ISO17025 compliance.
  
• Set up, communicate, and ensure suppliers understood Micron metrology expectations.
• Support Category Strategy for Benchmark to/with Suppliers to ensure Controls and Preventive measures are in place to support Shift-Left-Strategy. Supplier/Material development programs.
• Participate and support test method benchmarking and analytics with Suppliers

2. HVM Phase - Supplier Development and Excursion Management

• Lead Wet Chemical and Specialty Chemical Global Material Specification definition and alignment activities with internal stakeholders and suppliers.
• Deploy Wet Chemical and Specialty Chemical category Quality programs, lessons learnt and benchmark to/ with suppliers to ensure controls and preventive measures are in place to support Shift-Left-Strategy.
• Host regular Quality and Technical Review (QTR) meetings with strategic and developing suppliers.
• Manage supplier and sub-supplier changes in Supplier Change Management (SCM).
• Work collaboratively with Global OCT MTE, Operations and Facility globally for deep dive root cause investigations, corrective and preventive actions to ensure no recurrence of related Quality issues.
• Define, manage, and monitor supplier monthly quality performance metrics and their compliance to Micron SRS.
• Enhance the supplier quality business processes to improve productivity and efficiency.
• Support Global Procurement on supplier performance rating on Quality related criteria.
• Lead and conduct supplier audit.

Required:

Bachelor's Degree on engineering or related field.

Desired:

Master's Degree on engineering or related field.

Experiences:

• Previous experience working in Chem lab, wet chemical and specialty chemical under semiconductor industry field is preferred
• Basic Knowledge of ISO9001, IATF16949 & ISO17025 requirements.
• Basic knowledge of Wet Chemical and Specialty Chemical applications and wafer manufacturing process.
• Strong analytical skills with experience in MSA and calibration, statistical methods, FMEA, problem solving methodology and quality management systems.
• Ability to interact effectively with internal and external interested parties, across all levels.
• Ability to collaborate effectively with cross-functional organizations to understand needs and translate them into actionable plans, deliverables, and resource requirements.

Qualification:

• Minimum of 5 years’ in semiconductor field.

Develops, evaluates, revises, and applies technical quality assurance protocols/methods to inspect and test in-process raw materials, production equipment, and finished products. Ensures activities and items are in compliance with both company quality assurance standards and applicable government regulations. Performs analysis and identifies trends in the inspection of finished products, in-process materials and bulk raw materials, and recommends corrective actions when necessary. Ensures that established manufacturing inspection, sampling and statistical process control procedures are followed. May assure compliance to in-house and/or external specifications and standards, such as GMPs and ISO regulations. Evaluates and analyzes the efforts in organizing, documenting, and interpreting inspection support documents and records.

Job Description

Manage full spectrum of purchasing process (sourcing, quotation, negotiation, document filing and following up on the delivery schedules, etc).

Ensure sufficiency of stock by monitoring and replenishment to fulfil requisition of the respective staff, and job sites.

Track orders and ensure timely delivery of goods, receiving, issuing and distribution to respective staff, or job sites.

Maintain records of purchases, quantity, pricing, and other important data.

Perform other required duties / general administration work or task when assigned.

Compile requests for materials, prepare purchase orders, keep track of purchases and supplies, and handle inquiries about orders.

Buying supplies and materials directly from suppliers / vendors

Inventory monitoring

Job Requirement

Good working attitude, self-motivated and able to work independently.

Good communication skills. Purchasing clerk required to liaise with Chinese suppliers. Knowledge of Mandarin is essential.

Able to multitask and hardworking.

• Experience in the construction industry required.

Location : Ark@Gambas

Job Description:

1. Preparation of Presentation using various software

2. Design, Development and Drafting on Landscape Architecture Element and ABC Waters Design Element

3. Construction and Detail Drawing and Drafting

4. Preparation of Tender

5. Project coordination and management

6. Site inspection

Job Scope

1. Perform Quantity take-off for tendering of projects.
2. Prepare BQ, tender document, cost comparison for tender project including source, compiles, evaluates, and negotiate price with suppliers and sub-contractors according to tender requirements.
3. Prepare and assist in project final account.
4. Prepare project costing in the bidding process.
5. Prepare and submit project claims and ensure that claim forms are signed by client within the specified period. (SOP 3 working days)
6. Initiate and assist in project cost planning control and budget estimation.
7. Project administration and documentation include preparation of sub-contract, VO, and ensure timely submission of monthly progress claims, and final account.
8. Collect, organize and keep records of relevant forms and documents required for project claim purpose. (Including variation orders and correspondences)
9. Follows up effectively on payment certificate and payment with the clients.
10. To handle on-going project and resolve contractual issues with clients.
11. Carry other contracts and administration tasks or other assigned duties as required.

Procurement

1. Negotiate with vendors and acquiring the goods and services for the best price available.
2. Review purchase orders prepared by subordinates to ensure purchases are valid.
3. Maintain the records concerning the purchase of materials.
4. Working with suppliers to ensure that key processes are running efficiently and cost-effectively.
5. Building strong working relationships with key suppliers.
6. Provide products specification and rate to the relevant department.
7. Monitor purchases made are within the sales contracts or quotation.

Roles & Resonsibilities

1. Attending site meetings
2. Supervision and quality checking
3. Manage and ensure workers in compliance
4. To work inside the structures where daily work is progressing to ensure work is done.
5. To take pictures and document daily onsite application process, workmanship level and the resulting quality of lining system.
6. Able to work long hours in construction/wastewater environment.
7. Submit the daily report at the end of each workshift on time for online daily report submission.
8. Able to create simple graphics and diagrams for daily work daily
9. Physically fit to climb scaffolding and do daily QAQC conformance inspection
10. Testing in accordance to Contract Specifications.
11. Able to interact with Contractors, Engineers and Clients professionally
12. Responsible for their own transportation and able to work independently.
13. Supervising and inspecting LinaBond PVC Linina is a plus.

Requirements:

1. Mininum Degree in Civil Engineering or related education certificate
2. Mininum 5 years related working experience in construction
3. PC Skill,PSD,AI etc
4. Class 3 driving license is a plus
5. Long Working Hour in construction/wastewater environment and confined space environment, night shift might be required
6. Able to be start work will be better.

1. Looking for a skillful candidate
2. Candidate must work in contruction civil structure more than 5 years & obove
3. Negotiation & discussion with supplier & clients
4. Candidate must able to draft, read a drawing, calculte the material cost for each project tender
5. Knowlege of material type & its property from each supplier
6. Knowledge of BCA's requirement
7. Able to work under pressure & fast pace working environment

• Draft, conceptual design and model for project drawings
• Draft and scale drawings for submission to the relevant authorities for approval
• Produce technical plans for civil, structural and electrical buildings and structures
• Produce costing with Revit schedules
• Modelling MEP services using Revit,
• Ensure compliance of drawings with regulatory specifications and standard
• Liaise with consultants and sub-con on work progress and variations

Construction and Renovation Company looking for Account Assistant

Job Description

- Assist in day-to-day finance transactions and data entry into accounting system

- Handling full spectrum of Accounts Receivable & Accounts Payable including Invoicing, Receipts & Payments

- Prepare and check summary payment to subcontractors and suppliers, including issuing cheques and payment vouchers

- Prepare monthly payment for GIRO expenses/ staff claim/ petty cash and key into accounting system

- Assist in handling full set of account for auditing at end of Financial Year

- Assist HR Dept in Payroll Administration

- General Duties including documentation filing, updating data, billing, collections, payments, etc

- Any ad-hoc duties which may be assigned by Management

Requirements

- Minimum LCCI/ Diploma in Accounting/ Finance or equivalent

- Familiar in Auto Count accounting software will be an added advantage

- Good interpersonal skills, independent, problem-solving skill, positive attitude, self-driven and able to work with minimum supervision

- Knowledge of Microsoft Office such as Words, Excel, PowerPoint and Outlook

- At least 3 years relevant working experience in Construction or Renovation Company

- Able to start work immediately

- Good command of English and Mandarin

- 5 Working Day

Please state current and expected salary, if you are interested to be part of our dynamic team.

· Handling full set accounting services such as preparing monthly payment, Management Report, Submission and Tax Reporting

· Handle full set account for Singapore & Hong Kong Accounts

· Ensure timely and accurate report submission

· Liaise with External Auditors on external audit & finalisation of audited accounts for statutory purpose

· Perform other ad-hoc as assigned by Management

Requirements:

• Knowledge of accountancy
• Able to work independently under pressure
• Positive attitude, meticulous and initiative
• Possess strong honesty, integrity and confidentiality
• Good communications skill and interpersonal skills
• Team Player & able to meet tight schedule

- MIN. 5-6 years experienced in Building Construction

- Able to handle main contractor and sub-contractor.

- Able to lead the teams to perform the work.

- purchase building and construction material.

- Able to work on weekend if necessary.

Responsibilities:

· Assist in creating CAD drawings and diagrams for electrical circuits.

· Assist in various designed system products and prototypes assembling, setting & testing.

· Assist in debugging and troubleshooting system.

· Assist in documenting project details, including CAD drawings, BOM, operational manuals, and etc.

· Assembly and modifications of various designed system products and prototypes

· Commissioning and operating of various designed system products

· Participate internally or on site in supporting project timelines and meeting delivery deadlines.

Requirements:

· Diploma/Nitec or equivalent in Engineering (preferably Mechanical or Mechantronics)

· Fresh graduates with a good attitude are welcome to apply

· Good hands-on skills

· Good analytical & problem-solving skills

· Good comprehension of engineering literature and specifications

· Strong passion and willingness to work hard to overcome engineering challenge

· Singaporean/PR

Role & Responsibilities:

• To perform monthly maintenance & servicing of Fire Protection System
• Perform equipment installation and attend to equipment breakdown / troubleshooting at customers’ site
• Perform preventive maintenance and repair
• Supervise and manage site work, so-ordinate / meeting with project team
• Prepare maintenance report, breakdown report and other reports as required
• Handle Fire Alarm System (FAS) schedule service and maintenance activities for various facilities

Job Requirements:

• Diploma / Degree in Engineering / Construction or equivalent
• M & E Experience preferred
• At least 2 years of working experience
• Experience in the Construction industry
• Proficient in MS Office and Auto-CAD
• Excellent Communication, Leadership, Interpersonal and Problem-solving
• Ability to multitask, stay organized, work under pressure and manage deadlines
• Ability to work effectively in cross-functional and collaborative teams

Responsibilities:

· Repair of semiconductor equipment's electrical/ electronic parts.

· Generate incoming and outgoing test reports.

· Generate repair procedures and checklist.

· Maintain high repair quality and standard.

· On site support to assist customer in the installation of the repaired items.

Requirements:

· Diploma/Nitec or equivalent in Engineering (preferably electrical or electronics)

· Fresh graduates with a good attitude are welcome to apply

· Good hands-on skills

· Good analytical & problem-solving skills

· Good comprehension of engineering literature and specifications

· Strong passion and willingness to work hard to overcome engineering challenge

· Singaporean/PR

Role Description: The responsibilities of this role includes assembling, evaluating, testing, and maintaining electrical or electronic wiring, equipment, appliances, and apparatus. Troubleshooting and repairing malfunctioning equipment, appliances, and apparatus.

Specific Responsibilities:

1. Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.

2. Design, maintain, implement, or improve electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

3. Ensure compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

4. Ensure that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.

3. Competencies:

1. Gain experience in negotiation and consultative sales skills

2. Ability to be competitive while maintaining the customer's best interests

3. Strong analytical and problem-solving skills

4. Duration of Traineeships: 6 months

5. Approved Training Allowance: Fresh Graduates - $2500, Non-mature Mid-career Individuals - $2800, Mature Mid-Career Individuals - $3600

6. Education Qualifications Required for the Traineeship Role Under SGUnited Traineeship:

This position is open for both recent graduates and mid-career individuals (mature and non-mature). Graduates interested in this position should possess a Degree and above Qualification. Mid-career individuals from any qualification level can apply.

Job Scope

1. Perform Quantity take-off for tendering of projects.
2. Prepare BQ, tender document, cost comparison for tender project including source, compiles, evaluates, and negotiate price with suppliers and sub-contractors according to tender requirements.
3. Prepare and assist in project final account.
4. Prepare project costing in the bidding process.
5. Prepare and submit project claims and ensure that claim forms are signed by client within the specified period. (SOP 3 working days)
6. Initiate and assist in project cost planning control and budget estimation.
7. Project administration and documentation include preparation of sub-contract, VO, and ensure timely submission of monthly progress claims, and final account.
8. Collect, organize and keep records of relevant forms and documents required for project claim purpose. (Including variation orders and correspondences)
9. Follows up effectively on payment certificate and payment with the clients.
10. To handle on-going project and resolve contractual issues with clients.
11. Carry other contracts and administration tasks or other assigned duties as required.

Procurement

1. Negotiate with vendors and acquiring the goods and services for the best price available.
2. Review purchase orders prepared by subordinates to ensure purchases are valid.
3. Maintain the records concerning the purchase of materials.
4. Working with suppliers to ensure that key processes are running efficiently and cost-effectively.
5. Building strong working relationships with key suppliers.
6. Provide products specification and rate to the relevant department.
7. Monitor purchases made are within the sales contracts or quotation.

To helps technical teams plan, execute and deliver their projects on time, on budget, and within scope in accordance with business priorities. Throughout the lifecycle of each project, the coordinator tracks project statuses and informs management to mitigate issues and risks.

oversees the work of staff, and arranges venues and schedules for meetings between all of the individuals who are contributing to tasks. should communicatie with clients and employers about projects, events, campaign goals, and expectations.

Coordination - organizing the various parts of an activity to enable collaboration and efficient communication. Advisory - giving information or advice or a recommendation about what should be done.

Training and awareness – teaching and raising awareness of access and privacy responsibilities.

As an Inline and Final Parametric test program development engineer, you will be responsible for developing, maintaining, and optimizing Parametric test programs and strategies for semiconductor NAND Flash products. You will work closely with various engineering teams to ensure the quality, reliability, and performance of the products. You will also provide innovative solutions for test time reduction and test flow optimization.

Job Responsibilities

• Develop and maintain parametric test strategies and programs for semiconductor NAND Flash products
• Collaborate with test development and production engineering groups to ensure test program, infrastructure and system readiness for new product introduction as well as high volume manufacturing
• Improve device yield, reliability and quality through test condition optimization and data analysis and test equipment hardware optimization
• Provide cost effective and innovative solutions for production test flow optimization with cutting-edge Parametric test time reduction methodologies.
• Assist process and production teams by providing necessary engineering expertise to ensure smooth manufacturing operations.
• Introduce innovative test time reduction solutions and release Parametric programs to production in a timely manner.

Job Requirements

• Bachelor’s or Master’s Degree in Electrical, Electronics, Computer Engineering, Computer Science or any related engineering field
• Strong programming skills; Perl, C/C++, Python knowledge will be an added advantage.
• Knowledge of Unix/Linux System environment
• Solid analytical problem-solving skills
• Excellent verbal and written communication skills
• Good understanding of semiconductor device physics will be an added advantage
• Fresh graduates are most welcome to apply

Working Location :

1, North Coast Drive, Singapore 757432

About Micron

As the leader in innovative memory solutions, Micron is helping the world make sense of data by delivering technology that is transforming how the world uses information. Through our global brands — Micron, Crucial and Ballistix — we offer the industry’s broadest portfolio. We are the only company manufacturing today’s major memory and storage technologies: DRAM, NAND, NOR and 3D XPoint™ memory. Our solutions are purpose built to demonstrate the value of data to unlock financial insights, accelerate scientific breakthroughs and enhance communication around the world.

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

For US Sites Only: To request assistance with the application process and/or for reasonable accommodations, please contact Micron’s Human Resources Department at 1-800-336-8918 or 208-368-4748 and/or by completing our General Contact Form

Keywords: Singapore || North West (SG-03) || Singapore (SG) || Frontend Manufacturing || College || Regular || Manufacturing/Production Operations || #LI-ST1 || Tier 3 ||

Delivery and Performance:

• Assist with the production of budget estimates for project deliverables;
• Support the development of work plans and budgets for all activities in the project;
• Assist with and participate in internal and external reviews;
• Provide quality assurance support;
• Support the maintenance of all works efforts, to ensure they are delivered on time, to cost and quality standards;
• Seek to identify any project obstacles, barriers or any unanticipated risk events;
• Assist the PM to plan, monitor and evaluate project procurement;
• Ensure the integrity of financial and administrative operations in the project.

Method & Technical:

• Develop and implement construction methodologies and techniques specific to post-tensioning, Launching Gantry and Lifting Frame.
• Collaborate with clients to analyse project requirements and develop innovative solutions.
• Troubleshoot complex technical issues and implement solutions in real-time.

Cost Control:

• Monitor project expenses and financial performance, identifying cost-saving opportunities.
• Collaborate with procurement teams to optimize material and equipment purchases.

Project Control

• Track project execution by ensuring timely and adequate reporting;
• Monitor all project activities in relation to the respective project work plans and take corrective action, when necessary, to ensure the timely and cost-effective delivery of project outputs;
• Monitor project progress, identify improvement opportunities, assist with the revision of work plans and advice the project director of possible adjustments to meet the project objectives;
• Monitor contract obligations, develop management systems and accountabilities to ensure all contract obligations are tracked and met, including contractor and client contract obligations.

Safety and sustainability

• Ensure compliance with Workplace Safety and Health (WSH) policies and practices;
• Assess inspections to ensure compliance with organisational health and safety policies, processes and procedures;
• Assess records of accidents and incidents against WSH policies and practices;
• Apply organisational environmental sustainability and green building standards and guidelines;
• Implement risk management plans and risk controls in alignment with organisation's risk management framework.

Personnel Management:

• Lead and motivate the project team;
• Ensure that performance reviews are conducted;
• Ensure safety for all personnel and comply with the company standards

Qualifications and Experience Education

• University Degree in Civil Engineering, Project Management, or other relevant discipline.

Languages

• Fluency in written and spoken English is required.

Work Experience

• Minimum 10 years of relevant experience in project development.
• Experience in Bridge Project with erection works using specific Equipment (Launching Gantry, Lifting Frame) and Post-Tensioning system works.

Additional Requirements:

• Competent in the use of all commonly used computer software – outlook, Microsoft, Teams.
• Able to read and understand technical drawings.
• Ability to work independently, handle multiple tasks, work under pressure and deliver assignments on time.

Job Scope of Engineering / Technical Sales Engineer

1. Working together with sales team to maintain or excel (but not constrainted to) a minimum monthly sales target of S$100,000. (As a good guide for fluctuating monthly sales, the figure may be calculated base on a three month average).
2. To help in the servicing of customers in terms of conceptualizing of machine processes, writing up of proposals and quotations.
3. Help PM (Project Manager) in the planning of capacity to ensure timeline is being met. This is done with the help of a Master Project Schedule.
4. Coordinate with internal and external designers on the customer requirements to ensure customer needs are met.
5. Project monitoring to ensure timely delivery of goods.
6. To be involved in the process of new business development in new areas of industries.
7. Involved in public relations taking care of overseas partners and customers.

Requirements

1. With at least 3 years experience in Manufacturing Automation Machines. Knowledge in CAD software and common Miscrosoft software is required.
2. Educational qualifications: Diploma (or higher) in any discipline. Those with related experience may apply.
3. Self-motivated, objective driven. Multi-skill and multi-tasking required. Independent, self-initiative and creative.
4. Good interpersonal communication skills required (English and Mandarin).
5. Able to work well with others in terms of commitment, interests and adopting positive attitude.
6. Frequent traveling may be required.
7. Class 3 driving license added advantage
8. Willingness and flexibility are added good pre-requisites
9. Preferably to possess own vehicle (car allowances provided)

Responsibilities:

• Responsible for planning and execution of projects in accordance to the drawings and schedule.
• Supervise and coordinate site activities to achieve daily work schedules and to ensure compliance with project requirements.
• Liaise with clients, suppliers, and government authorities on project related issues.
• Attend site meetings.
• Ensure quality of works is achieved and safety regulations are complied with.
• Manage manpower on site.

Requirements:

• Degree in Civil Engineering.
• Experience in dredging, reclamation, or marine engineering industry is an added advantage.
• Proficient in Autocad and Microsoft Office.
• Possess supervisory skills.
• Independent, diligent and highly motivated.
• Able to communicate with people from all levels.
• A self-starter and achiever with the ability to solve problems and meet project datelines and customer requirements.
• At least 2 years of experience in Singapore.

Responsibilities:

• Responsible for planning and execution of projects in accordance to the drawings and schedule.
• Supervise and coordinate site activities to achieve daily work schedules and to ensure compliance with project requirements.
• Liaise with clients, suppliers, and government authorities on project related issues.
• Attend site meetings.
• Ensure quality of works is achieved and safety regulations are complied with.
• Manage manpower on site.

Requirements:

• Degree in Civil Engineering.
• Experience in dredging, reclamation, or marine engineering industry is an added advantage.
• Proficient in Autocad and Microsoft Office.
• Possess supervisory skills.
• Independent, diligent and highly motivated.
• Able to communicate with people from all levels.
• A self-starter and achiever with the ability to solve problems and meet project datelines and customer requirements.
• At least 2 years of experience in Singapore.

Responsibilities:

• Responsible for planning and execution of projects in accordance to the drawings and schedule.
• Supervise and coordinate site activities to achieve daily work schedules and to ensure compliance with project requirements.
• Liaise with clients, suppliers, and government authorities on project related issues.
• Attend site meetings.
• Ensure quality of works is achieved and safety regulations are complied with.
• Manage manpower on site.

Requirements:

• Degree in Civil Engineering.
• Experience in dredging, reclamation, or marine engineering industry is an added advantage.
• Proficient in Autocad and Microsoft Office.
• Possess supervisory skills.
• Independent, diligent and highly motivated.
• Able to communicate with people from all levels.
• A self-starter and achiever with the ability to solve problems and meet project datelines and customer requirements.
• At least 2 years of experience in Singapore.

Job Description
As a BIM Engineer, you will report to the Senior Design Engineer and be responsible for the successful implementation and management of BIM processes in the construction field, specifically focusing on Building Services, Airconditioning, and Mechanical (M&E, ACMV) works. You will collaborate closely with the design department to ensure compliance with engineering and safety requirements and coordinate with stakeholders to maintain the integrity and accuracy of the BIM model throughout the project lifecycle.

Key Responsibilities

1. Construct and manage Building Information Models (BIM) with precision, ensuring the integrity and accuracy of all models. Ensure timely coordination and completion of tasks as assigned by the immediate superior.
2. Ensure all BIM models comply with project specifications and requirements.
3. Maintain and update the model library for all ongoing projects, ensuring that all data remains secure and is treated as company property.
4. Collaborate with project teams to collect site information for updating project BIM models.
5. Work closely with the Quantity Surveying department to provide drawings and information required for tendering, cost estimation, monitoring, and scheduling.
6. Coordinate with the BIM department to validate and confirm the accuracy of BIM designs.
7. Maintain, update, and manage hardware and software essential for the operation of BIM.
8. Assist in the creation of 2D AutoCAD drawings and ensure seamless integration between 2D and BIM models, bridging the gap between office and site operations.
9. Ensure all work conforms to the company’s ISO standards.
10. Support the submission of Operation, Maintenance, and Monitoring (OMM) manuals and media presentations using BIM models.
11. Follow the company's responsibility and authority matrix in the execution of duties.
12. Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes and standards, such as Singapore Code of Practice (CP13), SS553, and the Fire Code.
13. Utilize design software to perform thermal load calculations, energy modelling, and system sizing.
14. Prepare design documents including system layouts, schematics, and specifications.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills:Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage. Inexperienced candidates must be willing to learn, with training provided.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Job Description:

As a Senior BIM Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

Duties and Responsibilities:

• Assist review sales handover budget to project department with reference to standards in compliance with the company policies, statutory requirements and contract specifications.
• Ensure project life cycle operation within budget and accordance to ISO set out.
• Perform project management duties including:

i. Project schedule preparation for manager approval

ii. Project submission (Documents & Drawing)

iii. Sourcing and raise Material procurement within budget

iv. Variation work quotation preparation for manager approval

v. Assist review on system implementation design from engineering department

• Responsible for site activities, coordination and supervision works to ensure withing planned schedule including:

i. Installation progress including material procurement & delivery and prepare periodic progress reports

ii. Update of system / drawing on any changes at site

iii. Prepare and attending site inspection. Follow-up for any defect rectification

iv. Testing & commissioning progress

• Ensure project works compliance with Workplace Safety and Health (WSH) policies and practices.
• Attending site meeting and coordination with stakeholders, external parties and customers to plan, organize, and other related activities for the assigned projects.
• As and when to take on new assignments.

Requirements:

• Degree / Diploma in Engineering equivalent
• Minimum 2 to 3 years of relevant working experience
• Must have relevant experience in ELV System (Security Access Control System, PA, Fire Alarm system, Structured cabling, & etc.)
• Have strong knowledge in designing a system for ELV security system
• Able to manage an ELV engineering projects cycle independently with minimum supervision
• Entry level candidates are welcome to apply