• Experience in survey of precast works for bridges, especially segmentation drawings, segment box mould setup works & monitoring of as-built data (prefer to have at least 2 years relevant experience).

• Experience in bridge construction from substructure to super structure (prefer to have at least 4 years relevant experience).

• Familiar with commercial geometry control software.

• Good command of English and Chinese in order to converse with subcontractors.

• Familiar with AutoCAD software.

• Candidate must possess at least a Diploma, Advance/Higher/Graduate Diploma in land survey, Engineering (Civil) or equivalent.

• Working location nearby Boon Lay MRT.

1. Responsibilities:

· Carry out land and engineering surveys, capping beam and pile cap setting out survey, traverse main and sub control lines

· Carry out setting out of building grid lines before and during the construction stage

· Prepare setting out data and pre calculation as per requirement

· Carry out routine building alignment (horizontal and vertical) survey during the course of the project, perform field surveying to obtain data for base plans

· Make accurate Pre-measurements and survey report for engineering to design

· Ensure all coordinates on field alignment to match up to construction drawing

· Any discrepancy between construction drawing and site condition to address immediately to Project team and Engineering

· Make accurate post- measurements and survey report for as-built drawing

· Periodic check & verify Survey instruments

· Working area nearby Boon Lay MRT

2. Requirements:

· Experience in LTA projects

· Minimum 5 year(s) of working experience in the related field is required for this position.

· Preferably Senior Executives specializing in Engineering - Civil/Construction/Structural or equivalent.

Job Descriptions:

• Provide assistance to the WSHO & ECO in tasks assigned by the WSHO & ECO / Project Manager;
• Conduct EHS induction course for new employees and contractors;
• Ensure the Risk Assessment and Safe Work Procedure & Environmental Aspect & Impact Register briefed to workers and sub-contractor;
• Assist the WSHO in conducting safety inspections at site and ensuring non compliance are properly recorded and closed out promptly;
• Conduct site safety inspection to ensure compliance with Workplace Safety and health Act and regulations and in-house safety procedures and requirements
• To check and ensure compliance with MOM/NEA and relevant authorities Requirements
• Responsible for all safety inspection activities being carried out.
• Ensuring environmental, safety, and health practices are carried out at all times.
• Assist in the conduct and arrangement of safety briefings, Tool Box Meetings and other safety related campaigns, events, programmes and training;
• Others ad hoc tasks assigned by top management.

Requirements:

• Preferably 2 years of experience as a safety coordinator or similar role but fresh graduates are welcome;
• Relevant Safety & Health Certificates, including Advance Certificate in WSH or Certificate in Safety Coordinator Training Course
• Proficient in MS Office;
• Working knowledge of safety management information system;
• Critical thinker and problem solving skills;
• Team player;
• Good time-management skills;
• Great communication skills;
• Certification in occupational health and safety

i) Study and fully understand the ISO requirements, technical drawings, work scope, contractual requirements and sub-contract agreements. Work with the consultants or owners to resolve technical issues prior to construction.

ii) Prepare work schedules and program and execute the works according to the detailed program.

iii) Ensure that the works are carried out according to the approved drawings and quality procedures.

iv)Ensure that good house keeping practises are observe throughout the project.

v) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance.

vi) preparation of shop drawings and as built drawings

vii) work closely with client/consultant to ensure project deliverables are met

Notes:

1. Preferably with engineering diploma or degree

2. Minimum 5 year works experience in structural engineering, A&A Works or ID Fit-outs.

Examining and priming surfaces for plastering.

Selecting the appropriate plastering materials for different sites.

Protecting non-plastering surfaces with appropriate materials.

Applying different plasters to exterior and interior surfaces.

Fixing and repairing previous plastering work when necessary.

Reporting any structural issues to the site foreman.

Mixing and preparing mortar, plasters, and other finishes.

Consulting with other contractors to ensure project deadlines are met timeously.

Location: East

Working days: 6 days 8am to 5pm

Job Description

-Constructing or facilitating the assembly of mechanical systems and components.

-Evaluating functionality of mechanical systems through testing.

-Rectifying equipment breakdowns by troubleshooting.

-Identifying, devising, and implementing effective solutions to emerging and existing issues.

-Assessing the overall performance, reliability, and safety of final products based on specifications and standards.

-Adapting and adjusting designs to meet requirements and resolve malfunctions.

-Executing a diverse array of engineering tasks using computer-aided design or engineering tools.

-Ensuring adherence to standards and client specifications by generating electrical systems specifications, technical drawings, or topographical maps.

-Overseeing compliance with specifications, codes, or client requirements by managing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

-Generating documents such as Method of Statements (MOS) and Requests for Information (RFI).

-Compiling regular reports (weekly, monthly) on project progress and completion.

-Guaranteeing all plans comply with governmental health, safety regulations, trade requirements, and industry standards.

-Providing direction and leadership to contractor teams and executing operations or project tasks.

-Developing work schedules, planning project phases, conducting presentations, and monitoring task progress.

-Performing other assigned duties as needed.

Requirements

-Demonstration of excellent interpersonal and communication skills, along with leadership abilities to influence others.

-Possession of strong analytical skills and efficiency, capable of independent work.

-Hold a Bachelor's/Master's degree in Mechanical Engineering or a related field from accredited universities recognized by the Building and Construction Authority (BCA).

-Minimum 2-3 years of experience in a marine construction or general construction company is advantageous.

-Proficiency in Microsoft Office, MS Project, and AutoCAD software.

-Availability to commence work immediately or with short notice.

Handling of Administrative matters and HR matters.

• Payroll
• Work Pass Application
• Document preparation, data entry and filing
• Update and maintain employees' database (in Excel and infotech)
• Arrange for trainings and appointments
• Renewal of license
• Handle and arrange for new employee and for repatriation.
• Other Ad-hoc jobs assigned

Requirements

• Min 1 yr experience
• Proficient in Microsoft Office software (Compulsory: Words and Excel)
• Effective communication skills, in both English and Mandarin
• Efficiency and accuracy
• Cooperative team member
• Willing to learn

Job Description :

• Report to Project Manager / Site Manager for the Arrangement of work
• Liaise with consultants for the submission and approval of materials and shop drawings
• Responsible for planning, programming and monitoring of work progress on site
• Co-ordinate the inspection work by Resident Engineer and clerk of works
• Handling technical and engineering problems on site
• Ensure site safety and proper execution of site work procedure on site
• Monitor and co-ordinate the works of subcontractors
• Structure and Architectural work

Requirements:

• Min 1 year experience

Job Description

• Ensure project site safety compliance and continuous improvement by implementing and co-coordinating safety awareness training /programmers/initiatives

• Assisting Project Manager in incident/workplace investigations and corrective action recommendations

• Execute appropriate safety measurements in accordance with the Workplace Safety & Health Act.

• Liaise closely with Project Managers, clients, main contractors, consultants and authority etc. on all safety and health issues.

• In Charge of safety documentation and control and Review.

• Conduct necessary risk assessment

• Ensuring Environmental, Safety and Health practices are carried out at all times

• Other Ad-hoc duties assigned from time to time

Requirements

• Must possess the WSHO certificate

• Minimum 2 years of relevant construction safety experience

• Processes Work-At-Height & other safety certificates is an added advantage

• Good interpersonal skills and a team player

Role:

Planning Engineer (3D Modelling / Construction / Up to $4500)

Interested applicants can send your resume to [email protected] and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

• Singapore Based (Changi Navel, Project Office nearby Lavender MRT)
• Project contract based (estimated 27 months until project completion)
• 6 Days work per week (8am to 5pm)
• $3500 to $4500
• Min. Degree in Civil and/or Construction Engineering + Preferably 3 year(s) of working experience
• Able to read basic structural drawings, proficient in MS Office, AutoCAD. + Experience with 3D modelling software.
• Career Progression Opportunities

Job scope

Creating, maintaining and reviewing a programme of work

Ensuring that projects are completed within budget and on time.

Liaising with surveyors, engineers and architects

Producing progress reports and forecasts for team members, clients and stakeholders

Breaking large jobs into down into phases of development

Using project management tools to plan timeframes

Planning contingency programmes in case timeframes change

Other ad-hoc duties as assigned by superior.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

Architectural Engineer

• Work Location: Changi Naval Base
• Address: Maude Rd
• 6 days 8am to 5pm
• $4000 to $6000

Requirements

• Degree/Master in architectural engineering, design, or similar or equivalent, recognized under Board of Architect
• At least 3 years of Experience in a marine construction/construction company is favourable
• Proficient in Microsoft Office, MS Project and AutoCAD software/Revit.

Job Scope

• Collaborating with different project stakeholders to ensure project goals are met.
• Reviewing and designing Architectural and engineering plans.
• To coordinate all the Architecture works and maintain submissions.
• Ensuring all plans are compliant with governmental health and safety regulations.
• Providing guidance to subcontractors like builders, plumbers, and electricians, and helping them interpret design specifications.
• Liaising with clients to ensure all issues are addressed in a timely manner, and that project requirements are met.
• Managing project timelines and ensuring deadline adherence.
• Producing detailed reports as required by the project roadmap.
• Using software programs for simulating architectural designs
• Verifying and validating onsite work against plans and designs.
• Stay up-to-date with industry standards and trends and integrate them into the design process.
• Other ad-hoc duties as assigned

If Interest please kindly click on the Apply button

Ong Choon Kiat (James) | Reg No: R22104989

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

• Work Location: Changi Naval Base
• 6 days 8am to 5pm
• $3500 to $4500
• Project contract based (Estimated 27 months until project completion)

Interested applicants can send your resume to 8739 9469 Janie / [email protected] and allow our Consultants to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

Requirements

• Min. Degree in Civil and/or Construction Engineering
• Able to read basic structural drawings, proficient in MS Office, AutoCAD.
• Preferably 3 year(s) of working experience
• Experience with 3D modelling software.

Job scope

• Creating, maintaining and reviewing a programme of work
• Ensuring that projects are completed within budget and on time.
• Liaising with surveyors, engineers and architects
• Producing progress reports and forecasts for team members, clients and stakeholders
• Breaking large jobs into down into phases of development
• Using project management tools to plan timeframes
• Planning contingency programmes in case timeframes change
• Other ad-hoc duties as assigned by superior

Fun Jia Jia (Janie) | Reg No: R22107945

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

• Position : Project Engineer - Building Construction (A1 Main Con) - Up to $6000 + Bonus
• Working hours : Monday to Friday | 8.30am to 6pm | Saturday Half Day
• Location: Central Area
• Salary (commensurate with experience) : Up to $6000 + Performance Bonus + Transport Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Building Construction

Main Responsibilities:

• Assist in monitoring and managing the day-to-day operations of project
• Liaise with subcontractors, surveyors and site supervisors/foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with owner/client/contractors/sub-contractors on the project related matters
• Carry out site inspection and ensure that the works were executed to the required quality standards

Requirements:

• Degree in Civil/Construction Engineering or equivalent with minimum 2 years of working experience in Building & Construction Industry.
• Independent with good communication skills
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.
• Candidates requires work pass NEED NOT APPLY

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Responsibilities:

• Accountable for reviewing tender documents and drawings
• Accountable for quantity taking-off
• Accountable for preparing tender submissions
• Ensure timely receipt of technical information relevant to tender
• Prepare standard measurements/quantity
• Prepare the Bar Bending Schedule
• Source for quotations
• Evaluate, analyse, and input pricings for tender
• Participate in post-tender clarifications
• Participate in a kick-off meeting with Consultants/Clients
• Participate in hand-over process to project team and project briefing to colleagues
• Participate in Project Review Meetings for evaluating project process
• Prepare quotations for various technical works, material, and manpower etc.
• Check sub-contractors’ bills and get approval
• Handle Variation Orders and Claims for certification
• Perform other duties as assigned

Requirements:

• Bachelor Degree or Diploma in Civil Engineering/Quantity Survey
• Min 2 years of relevant experience in the related functions preferably in the marine construction industry

• Overall, in charge of upkeep building facilities, carry out timely preventive works, manage and maintain daily site operations to ensure compliance with regulations.

Requirements:

• Diploma in Building Services / Property Management / Project & Facilities Management or equivalent
• At least 3 years of contract administration & license renewal experience in commercial buildings

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected] Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities:

• Coordinate and work closely with Project Manager to oversee site matters and provide technical support such as interpret construction drawings
• Ensure all technical drawings conform to the latest BCA codes and regulations
• Supervise site progress and ensure timely delivery of contract works from subcontractors/suppliers
• Manage subcontractors/suppliers to perform their respective scope of works for smooth project execution
• Conduct regular site inspections and enforce in-house regulations
• Attend site meetings to assist the Project Manager with necessary preparatory works
• Liaise with relevant government agencies to obtain necessary site permits/clearances
• Any other ad-hoc duties as instructed by superiors

Job Qualifications / Requirements:

• Possess a recognised Degree or Diploma in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management and at least 3 years of relevant working experience of the building construction industry

or

• Degree in local universities in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management
• Strong knowledge in use of Autocad, BIM software such as Revit and microsoft projects

Summary:

• Basic + AWS +Bonus
• Company with great career prospect

Job Scope:

Project Engineer

• The plan is designed to benefit employees by ensuring that materials are readily available.
• Verify that workers are performing their tasks correctly and safely.
• Monitor the site's status and provide updates to the Project Manager.
• Communicate with the client's representative regarding the assigned project.
• Participate in project meetings.
• Coordinate site activities with the main contractor.

Project Manager

• Responsible for developing the project startup and execution plan, including defining key targets for time, cost, quality, resources, EHS, and contractual aspects.
• Effectively communicate with client representatives and consultants on all project-related matters such as authority, planning, contracts, construction, and EHS, including regular reporting during meetings.
• Lead a team of professional and technical staff to plan and execute daily operations, ensuring the achievement of key project targets.
• Manage Subcontractors to ensure they meet their performance targets in terms of time, cost, quality, and safety.
• Ensure that project activities align with the Company's ISO system requirements.
• Implement and oversee project budget plans and manage contractual matters comprehensively.

Requirements:
• Candidates with Civil works/ Structural Construction/ LTA background are welcome to apply, salary can be negotiable

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | See Yew Jin (R22103957)

EA License No: 20C0358

• Reports to the Construction Manager
• To ensure that day to day lifting operations are monitored at an appropriate level.
• Plan, organize, supervise and liaise closely with sub-contractors and operation teams on all ongoing lifting activities.
• Perform routine checks and inspections on site to ensure the compliance with authorities’ requirements.
• Address to concerned party regarding the safety of any lifting operations
• Provide reports to construction team regularly
• Liaise closely with HSE team to ensure operations comply with safety standards

Job Requirements:

• Degree in Civil Engineering or equivalent
• Minimum of 5 years’ experience in the construction field; inclusive of 3 years’ experience in construction and supervision for vehicular structures and road projects (LTA Road / MRT / Viaduct)
• Technically expert and highly knowledgeable in lifting of heavy structures
• Candidates with previous experiences in LTA Projects are preferred
• Attained IES/SHETC Appointed Person for Lifting Operation certification is mandatory for this position
• This position require to perform night lifting works when necessary
• Location : Woodlands
• Project : Viaduct

• Provide technical network system and desktop support to ensure the smooth and effective delivery of IT services to the company.
• Carry out the installation, upgrading and maintenance of hardware and software.
• Handle troubleshooting of IT problems from users and assists in daily operations.

Requirements:

• ITIL certified
• Diploma in Computer Science or equivalent
• At least 2 years of MIS experience in handling Window servers, Active Directory, Router and Network Switches.
• Excellent skills in handling software and hardware troubleshooting
• Willingness to work outside regular business hours as required.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1984199

Job Description

• Manage the site works
• Planning, Supervising & Coordinating Project
• Ensure quality work is being achieved
• Ensure safety regulations are being complied with
• Attend site meeting
• Monitor the site progress and have good knowledge in project management to ensure project is scheduled to complete in time
• Raise the RFI to Main Contractor
• 5.5 days work (Monday to Friday 8am to 5pm & Saturday 8am - 12pm)

Requirements

• Possess Diploma or Degree in Civil Engineering or equivalent
• Mininum 5 years experience
• Relevant experience in RC structure works
• Strong skills to control the site progress
• Able to work independently and cope in a fast-paced environment
• Well-versed in construction sequence, principles and regulatory requirements
• Independent, diligent, meticulous and highly motivated with excellent team spirit
• Proficient in Microsoft Office

Job Description

-Maintaining, implementing, or enhancing electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.

-Performing a broad spectrum of engineering tasks by utilizing computer-aided design or engineering software and equipment.

-Ensuring that installation and operations adhere to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.

-Ensuring adherence to specifications, codes, or customer requirements by overseeing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.

-Collaborating with various project stakeholders to achieve project objectives.

-Addressing and resolving technical problems and issues with diverse parties.

-Preparing Method of Statements (MOS) (inspection test plan, safe work procedures) & other documents such as Requests for Information (RFI) etc.

-Compiling reports (weekly, monthly) on project progression and completion.

-Conducting communication with individuals at all levels and resolving arising conflicts.

-Gathering and evaluating drawing and technical information.

-Ensuring all plans comply with governmental health, safety regulations, trade requirements, and code of practice.

-Providing guidance and leadership to contractor teams and executing operations or project tasks.

-Developing work schedule micro programs, planning ahead of work program, conducting presentations, tracking and monitoring task progress.

-Undertaking other ad-hoc duties as assigned.

Requirements

-Possession of exceptional interpersonal skills and communication abilities, along with leadership qualities to influence others.

-Efficient, possessing good analytical skills and capable of independent work.

-Possession of a Bachelor's/Master's degree in Electrical Engineering or a related field from accredited universities recognized by the Building and Construction Authority (BCA).

-Minimum 2-3 years of experience in a marine construction or general construction company is preferred.

-Proficiency in Microsoft Office, MS Project, and AutoCAD software.

-Availability to commence work immediately or with short notice.

• Responsible for assisting Project Manager to plan, manage and ensure smooth implementation and monitor of projects assigned from inception to completion on time and of desired quality

Requirements:

• Min Nitec in Engineering / Construction / BCSS or equivalent
• Min 2 years of working experience in building construction industry / project site work

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Reg No. R1326740

Job Description:

• Ensure that M&E specifications and contractual requirements are complied accordingly throughout the projecty progress
• Liasie with respective consultants and client on the intended designs and resolve technical M&E matters
• Coordinate with other disciplines on site such as Architectural & Structural teams on design and project schedule
• Manage M&E subcontractors alongside with Site engineers and Project Manager to ensure timely delivery of project
• Produce M&E coordination drawings to other teams for submissions
• Assist with all on site M&E related coordination works and conduct inspections to ensure compliance with requirements & drawings
• Any other ad hoc duties as assigned

Qualifications/Requirements:

• Possess a recognised Degree or Diploma in Mechanical / Electrical Engineering, and at least 3 years of relevant working experience of the building construction industry

or

• Degree in local universities in Mechanical / Electrical Engineering
• Strong knowledge in use of Autocad, BIM software such as Revit and microsoft projects

• Cut tiles and shape them properly using power and hand tools
• Align tiles and straighten them to ensure patterns are even and precise
• Create wall and floor designs by laying and setting tiles in kitchens, toilets, bathrooms and living rooms
• Follow blueprints precisely to mark and measure surfaces that need to be tiled to determine how to proceed with tiling jobs

• Reports to the Project Director
• Lead a team of design engineers/drafters to ensure smooth workflow
• Review all structural design-related matters with Client(LTA) / Authorities / Design consultant / Subcontractor
• Prepare and submit all design deliverables to LTA
• Provide advice to the construction team, and highlight potential design risks to all stakeholders

Job requirements:

• At least a Master Degree in Civil Engineering or equivalent, recognized by the PE Board, Ph.D. is preferred
• Minimum 10 years of relevant project experience in civil design for A1 MNC construction firm; inclusive of 5 years in a managerial role
• Candidate should possess experience in the design of vehicular structures and road projects of similar scale & complexity to our project
• Technical expertise and knowledge in bridges, concrete structures, and viaduct design are essential for this position
• Proficient with all stages of the development cycle for Design and Build projects.
• Strong background in project management
• Excellent interpersonal & leadership skills
• Location : Woodlands
• Project : Viaducts