RESPONSIBILITIES (E.g. Job Scope) :

• Manage and coordinate the preparation of site office setup such as sourcing for container office vendor, Singtel and utilities application, etc.

• Assist in sourcing for office furniture quotations, safety PPEs, other admin purchasing matters.

• Provide admin support to Admin Manager such as printing of namecards, IT equipment requisition, etc.

• Assist in transportation coordination matters.

. Any other duties as assigned by superior.

Responsibilities:-

• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999 Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)
• Establish, update, maintain, and implement the Environmental Management System and Environmental Impact Aspect assessment
• Conduct / Plan site environmental inspection and ensure effective implementation and continual improvement on all environmental matters. Advise occupier of the workplace or other person in charge of the workplace on environmental health problems and recommend remedies to establish a healthy working environment
• Oversee the installation of noise meters at site vicinity and monitoring of construction works noise to ensure it does not exceed the permissible noise levels throughout various stages of construction phases
• Coordinate with external pest control operator visits to carry out fumigation, mosquito oiling and rodent control measures. This is to ensure effective control on site
• Liaising with National Environment Agency & Public Utilities Board (PUB) on environmental issues and other statutory requirements of compliance by sites
• Updates on codes of practice & environmental literature and circulates information to each level of employees

Requirements:-

• Must possess Environmental Control Officer Certificate and registered with National Environmental Agency (NEA)
• Min 2 years’ relevant experience

• Administrative Support: Provide general administrative support, including managing phone calls, emails, and office supplies.

• HR Records Management: Maintain and update employee records in the HR system, ensuring accuracy and confidentiality.

• Staff Welfare Coordination: Help organize employee welfare activities, including staff events and recognition programs.

• Document Preparation: Prepare HR-related documents, such as employment contracts, letters, and reports.

• Compliance: Ensure compliance with company policies and local labor laws, assisting in audits and other regulatory requirements.

• Other Duties: Perform additional tasks as needed to support HR and administrative functions.

Job description:

1. To plan, organize and monitor all activities relating to quality assurance to maintain quality standards and systems to meet customer requirements.

2. To define and control the characteristics of each part, affiliated with appropriate Inspection Plans; and make available the required facilities to verify these characteristics.

3. To oversee and approve First Article inspection procedures prior to sample submission to customers.

4. To issue material certificate to meet customer requirements.

5. To liaise with customers on matters related to quality.

6. To conduct/co-ordinate Material Review procedures to implement any Corrective/Preventive Action; and follow-up for a closure with result of satisfactory action taken.

7. To approve disposal of non-conforming items.

8. To ensure all inspections are conducted correctly.

9. To control and manage the Equipment Calibration System; setting the frequency of each calibration.

10. To report quality performance and critical discrepancy issues to General Manager.

11. To propose to General Manager an indicative rate of annual salary-increment and annual bonus of his subordinates reflected through the past year performance.

12. To approve the application of various type of Leave of his subordinates.

13. To approve petty-cash paid to his subordinates.

14. To recruit and upgrade his subordinates with relevant training programs and sue practical experiences.

15. To train subordinates in Sampling and Inspection techniques.

Experience Required:

At least 5 years experience in a Quality Control Management.

Skills required

1. Well-versed in ISO 9001:2000 requirement.

2. Quality Control System.

Qualification required

1. Mechanical/Manufacturing/Engineering Degree.

IT Exposure

1. Computer literate in MS Office.

2. Application knowledge in Autocad.

Job Highlights

• Good Exposure and Opportunities
• Attractive staff benefit
• Vibrant Work Enviroment

Job Description

Our Working Culture

We are all about the new and the bold. Embracing individuality while encouraging innovation, we meld dynamic minds with strong ethics to put forth our finest work wherever we are, whatever we do. In a fast-paced world full of interesting challenges, we strive to give only the best solutions.

Why Join Us?

We believe that the best ideas come from a diversity of thought. If you are a critical thinker looking for a fulfilling career, then look no further. Join us at Vanguard and redefine your daily grind with our easily accessible office, flexible working hours, and wide range of retail, furniture, and F&B discounts.

Core Duties & Responsibilities

• Responsible for overall project management, planning & control, and execution, including project budget evaluation and profitability
• Administer all site works, contract administration, management of delivery and progress of project to ensure quality of work and safety regulations are complied.
• Preparation of tender documents, including drafting of project schedule, construction methodology, site utilisation and planning and assist in awarding construction and procurement contract.
• Maintain client's satisfaction with project performance and follow up on new business opportunities with the client
• Any other ad hoc duties assigned

Skills, Experience, Competencies, Requirements

• Preferably Diploma or Degree qualification in Interior Design or Architecture equivalent
• Preferably with at least 5 years of working experience in project management
• Candidates with to Interior Fit-outs will have an added advantage
• Demonstrate ability to effectively manage multiple projects, administrative works, competing priorities and meeting tight deadlines
• Strong in verbal & written communication skills
• Be proactive and result-oriented
• Familiar with Microsoft Office
• Certification in WSQ Manage Workplace Safety and Health in Construction Sites will be an advantage
• Able to work independent.
• Able to work on weekend when necessary

What is business development?

Business development deals with the operational and strategic development of a company. This involves discovering and developing new business areas or new products so that the company can expand.

A business development manager (BDM) is responsible for ensuring that development and implementation in this area are carried out consistently and successfully. As a business developer, you're constantly on the hunt for new ways to develop your company.

The aim is for future customers to be satisfied overall with the company and its products. And turnover increases as a result.

What are the tasks of a business developer?

What does a business developer do? Basically, everything revolves around figuring out how to advance a company in a future-oriented way and how to help it to grow.

This might involve asking questions like:

· Where should the company be within a certain period of time (e.g. in 2 years)?

· Which customers and/or partners do we need to achieve our goals?

This means there are certain tasks that a business developer regularly has to take care of in a company:

· Develop new business areas, sales markets and products. This includes new customers and partners.

· Make forecasts to identify future trends.

· Create business plans and strategies.

· Identify and secure new market shares. Place the resulting new products on the market.

· Develop existing business areas.

· Carry out monitoring and reporting.

· Perform competitor analysis.

Important requirements and expertise of a business developer

If you're interested in business development and want to find a job in this area, you need to meet some requirements and have certain expertise in order to start applying for vacancies:

· There are no specific degree programmes in business development. But you can specialise in business development as part of some MBAs or similar master's degrees.

· Business developers are used in all sectors and are desperately sought after. This is especially true in industries that are constantly on the lookout for new innovations and technologies.

· BDMs are particularly in demand in the fields of technology and science:

· Mechanical engineering

· Telecommunications

· Pharmaceuticals

· IT

· Chemistry

· Biotechnology

Responsibilities:

• To review, conduct incident / accident investigation and provide recommendations for countermeasures and to prevent recurrence of accident
• To coordinate of daily toolbox meeting and upkeep the records
• To conduct daily safety inspection and other type of safety inspection as required at work site
• To coordinate the immediate rectification of unsafe conditions and correct any safety malpractices on site
• Monitor and oversee the enforcement of In-house Rule and Regulation and ensure safe work practices on site
• Coordinate and conduct the safety induction course to all site staffs
• Submission of Quarterly EHS performance & 6-monthly review of Risk Assessment
• Ensure and to carry out duties in accordance to WSH Act & Integrated Management System
• Assist WSHO to establish, update, maintain, and implement the Safety and Health Management System
• To assist WSHO for all safety promotional activities, safety audits, safety meetings and execution of safety programmes

Requirements:

• Advanced Certificate in Workplace Safety and Health or equivalent
• Minimum 2 years of relevant working experience

Reqponsibilities :

• Maintenance of invoices i.e. scanning, updating and posting of invoices in system
• Processing of payments to vendors and perform bank reconciliation
• Liaison with vendors for missing invoices/payment status
• Attach daily bank advice in accounting system
• To perform ad-hoc duties as per assigned

Requirements

• O Levels/ LCCI / Certificate / Diploma in Accountancy or equivalent
• Computer skills and Microsoft Office
• Minimum 1 year of related experience

• To conduct / plan safety inspection to verify safety provision and provide recommendations for improvements conforming to worksite rules and regulations to comply with statutory requirements
• To investigate any accident, dangerous occurrence or occupational disease that occurred within the workplace and provide recommendations for countermeasures to prevent recurrence
• Implementation and revision of Risk Management
• Liaise with Ministry of Manpower on safety issues and safety statutory requirements
• Establish, update, maintain, and implement the Safety & Health Management System
• To conduct relevant safety training needs e.g. Safety induction, Permit to Work, Safe Work Procedures etc.
• Identify training needs for safety personnel and recommend the required training to ensure competency of the workforce.
• To conduct Safety Committee Meeting to address safety issues and ensure a safe working environment for all personnel
• Ensure in-house rules and regulations are implemented and enforced diligently at the worksite.
• Coordinate safety promotional activities to develop and maintain safety awareness among all personnel
• Evaluate, select and control sub-contractors to ensure awareness of their safety obligations on site
• Review, assess and maintain the Safety Data Sheets
• Ensure storage, movement, use, and disposal of hazardous substances and chemicals are well managed
• Ensure the register of hazardous substances is up to date
• Continuously review the emergency procedure and update.
• Manage and control situations arising during an emergency
• Plan and implement occupational health programs to protect workers from health hazards such as noise, dust, toxic gases, vapors and radiation
• Coordinate safety audit and ensure the closure of all findings
• Coordinate the preparation and submission of all required safety reports e.g. Integrated Management System (IMS) Quarterly report, Risk Assessment review
• Updates on codes of practice & safety literature and circulates information to each level of employees
• Monitor the Safety Performance of the project as set by the company policy and objectives e.g. Accident Frequency Rate (AFR), Accident Severity Rate (ASR) etc
• Person in charge of the workplace on environmental regulations pertaining to the Environmental Public Health (Registration of Environmental Control Officers) Regulations 1999
• Person in charge of the workplace implementation and revision of Environmental Management in the worksite
• Act as an Earth Control Measures Officer (ECMO)Ensure safety practices and housekeeping is to maintained to the highest standard

Requirements:-

• Must possess registered MOM WSH Officer license
• Min 3 years’ WSH Officer experience in Building projects

To deliver the premix cement to the client's permises

To stand by duty in case of continuous concereting

To maintain good condition of vehicle

Tasks and duties

• Preparing budgets and schedules.
• Overseeing daily operations on site.
• Coordinating with architects, engineers and trade workers.
• Monitoring work progress and ensuring a project is on schedule.
• Reviewing contracts and negotiating with subcontractors and vendors.
• Monitoring the safety of the job site.
• Reporting work progress and updates to project stakeholders.
• Ensuring compliance with building and construction codes.

Job Description

Job Scope & Responbilities :

* Handle for full set of account

* Financial month end closing

* Coordinate and liaise with external parties like auditors, tax agents and tax authorities

* Responsible for all duties related to Human Resources,

* Monthly payroll preparation, CPF submission

* Responsible of IRAS AIS,IR8A, Corporate tax, Income tax etc.

* MOM WPOL/EPOL/ matter

* Handling other admin duties

* Perform any other ad hoc duties when required.

Job Requirements :

* Candidate must possess at least diploma or equivalent.

* Language: Bilingual in English and Chinese Mandarin (read, write and speak) as the incumbent needs to liaise with Mandarin-speaking associates in the course of work.

* At least 2 Year(s) of working experience in the related field is required for this position.

· Construct 3D BIM models and work closely with project teams on drawing amendments and updates.

· Produce civil and architectural 3D model drawings, design works and calculations.

· Provide BIM modeling/CAD drafting and design support.

· Coordinate and manage BIM model, create Revit families and CAD blocks.

· Obtain work assignments of either specific design elements or CAD drafting from project managers and engineers.

· Ensure the completion of BIM projects in accordance to project requirements and in compliance with authorities’ guidelines.

· Review all work for completeness and accuracy.

· Manage workflows, processes and implementation of BIM projects.

· Knowledge in BIM responsibilities

· Maintain and perform document control

· Any other responsibilities as assigned

.To assist WSH Officer in managing Workplace Safety & Health issues in Construction environment

· Monitor and report all work or operation that violate safety procedures, instructions, or would endanger life and property

· Prepare daily/weekly workplace safe/unsafe observation report

· Accident and incident investigation

· Report all incident and accident as per site/project and company’s emergency reporting protocol

· Conduct safety training of employees

· Conduct regular site checks and takes appropriate corrective actions

· Perform other related duties as directed that correspond to the overall function

· At least 3 years of working experience in HDB (BTO) project

· Possess Certificate in Workplace Safety and Health (WSH)

· Good knowledge in ISO and OSHA safety standards

PharmEng Technology has been providing quality services to leading manufacturers of healthcare and pharmaceutical products since 1997. Our specialists hold expertise in Commissioning & Qualification, Validation, Quality Systems, Regulatory Affairs, Engineering, and Training to ensure that our clients can keep on providing the world with their cost-effective and high-standard healthcare products. At PharmEng Technology, we strive to cultivate the best working environment where empowerment, passion and perseverance are nurtured while serving our clients to achieve their unique business goals. We are seeking an experienced Quality Control Analyst with experience in pharmaceutical company/Life Science industries for a role in Singapore.

Key Responsibilities:

• Sample storage and management
• Prepare and support analytical testing
• Analytical testing and documentation
• Perform lab housekeeping activities
• Perform administrative documentation
• Comply with all HSE guidelines
• Detect and report potential accident, risks and propose solutions
• Responsible for participating in initial training and retraining

Qualifications:

• Proficient in English.
• Previous experience working in a laboratory environment in the pharmaceutical industry (quality assurance, production).
• Diploma or Bachelor's Degree graduate

This position is for permanent 12-hr night shift, 2-3-2 basis.

Why PharmEng Technology?

Our consultants come from different areas of the Pharmaceutical/Biotech/Medical Device industries and have extensive experiences obtained from world-class organizations in North America, Europe, and Asia. At PharmEng Technology, we value everyone’s unique talents and work together to support our clients. We offer continuous career growth, competitive wages, opportunities for travel and a team mentality that sets us apart from our competitors. It is the growth of our staff that continues to grow our company globally.

EEOC Statement

At PharmEng Technology, we don’t just accept difference — we celebrate it, we support it, and we thrive on it for the benefit of our employees, our clients, and our community. PharmEng Technology is proud to be an equal opportunity workplace.

Responsibilities

Overall responsibility is to create BIM content and production documents for the purpose of delivering a BIM assisted project.

Proficient with C&S/ Archi / M&E 3D Models

Produce BIM model deliverables for design, documentation and fabrication purpose

Familiar with BIM documentations and shop drawings directly from the models

Interpret engineering drawings and updates of Consultant’s RFI to reflect the design intent

Liaise with the team for production of shop drawings

Creation of 2D families

Ensure that BIM models are delivered with professionalism (Quality, due diligence and timeliness)

Requirements

Min Higher Nitec Architectural Technology or Structural Engineering/ Diploma in Engineering or BIM

Proven track record with at least 2 years full experiences with BIM, preferably from Main Contractor or Consultants

Must be proficient in Revit, Navisworks, Auto Cad & MS Office

Highly adaptable, flexible personality who embraces teamwork, but also enjoys working independently

Good command of spoken and written English

Join a multinational company with a great work environment and excellent opportunities for career growth!

• Design and submit electrical equipment and systems based on technical specifications.
• Plan project costs and schedules.
• Manage site activities, including labor, installation, and coordination.
• Collaborate with LTA, consultants, contractors, and site teams.
• Support the Project Manager in guiding the construction team.

Job Requirements:

• Degree/Diploma in Mechanical or Electrical Engineering.
• At least 5 years of experience in the construction industry.
• Team player with strong analytical skills and ability to work independently.

For interested applicant, click 'apply'

EA Reg no: R1328476

EA License No: 16C8443EA

Personnel Name: Melody
EA Personnel No: R2095899

• Report on the status of accounts payable and receivable
• Invoice preparation and follow-up, financial statement reconciliation
• Update internal accounting databases and spreadsheets
• Responsible for management and budgeting of cash flows
• Review effectiveness of internal controls with respect to payment cycle
• Updating of cashbook and timely posting to the General Ledger
• Assit in the monthly closing of accounts including preparation of accounting journals and quaterly GST filing
• Handle general office admninstration matters
• Assist in other ad-hoc projects as required

• Understand the project brief from designers/clients
• Developed designs and oncepts based on the client's corporate identity
• Prepare construction, joinery and details drawings
• Prepare specifications forn Furniture, Finishes and Equipment's
• Technical Drawing (AutoCAD): Space Planning & Construction Drawing

• Basic knwoledge on Accounting (AP,AR)
• Check and verify suppliers' invoices before input into system
• Update of daily ollection ledgers
• Maintain proper accounting records
• Assit in issuing sales invoices and official receipt
• Track vouchers and maintain voucher tracking list
• Any other ad-hoc duties as assigned

• Tracking projects status and follow-up with team for the action items
• In-charge of project team timesheets and keep track of billling status
• Assist Project Manager in coordinating
• Issuing of sales and ourchase related documents (invoice)
• Responsible of general administration function
• Provide administrative support to teh accounting department
• Daily update in Google Spreadsheet
• Stock taking
• Administrative works about general workers
• Submission for project documents to related parties

HR Duties

Assist HR Manager to overseeing HR/Admin functions for all employees

1. RECRUITMENT

· Ensuring that the company’s hiring process and documentation are compliant with the Fair Consideration Framework and all other requirements / guidelines / advisories by the Singapore government / Ministry of Manpower.

· Responsible for sourcing of candidates by means including but not limited to the Job Bank, online recruitment portals, Staff referral Scheme and recruitment agencies.

· Conducting pre-interview screening of job applicants and forwarding shortlisted applications to recruiting managers

· Arranging for pre-employment medical examinations for selected candidates

· Liaising with selected candidates to explain proposed terms of employment and staff benefits and to finalize employment of selected candidates.

2. WORK PASS ADMINISTRATION INCLUDING EMPLOYMENT PASSES

· To handle administration work in relation to work passes including but not limited to the application, cancellation and renewing of work passes.

3. HANDLE STAFF ENQUIRIES AND DISCIPLINARY ACTIONS

· Ensuring that HR policies and procedures are communicated to staff and responding to internal enquiries relating to the same.

· Assisting in the administration of the company’s grievance reporting, investigation and disciplinary process.

4. STAFF RESIGNATION AND TERMINATION

· Processing and handling staff resignation and termination in accordance with company policy and procedure.

· Conducting admin for staff who have resigned /been terminated such as arranging for handover, calculating and arranging for last payment to staff and income tax payment (for foreigners).

5. TRAINING & DEVELOPMENT

· Responsible for staff training and development program

6. OFFICE ADMINISTRATION AND IT SUPPORT MATTERS

· Overseeing and provide support in office administration matters

· Assist in handling IT support matters such as email creation, online meeting bookings, hardware/software renewal matters.

7. OTHERS

· Develop and implement human resources strategies, plans, policies, processes and programs

· Draft documents such as letters and Inter Memos upon requests

· Assist in preparation & execution of Company events and matters

REQUIREMENT (E.g. Qualifications, Certifications, Experience) :

Please specify;

. Degree in Human Resources (HR) or equivalent with at least 5 years of relevant experience

. Displays good understanding and knowledge of local human resources practices, local employment laws and regulations

. Familiar with construction industry work pass and training requirements.

. Hands on experience in Employment Pass application and requirements.

.Experience in handling payroll process (for at least 150 staff)

. Excellent command of English (both written and spoken) required as candidate will be expected to communicate frequently with internal stakeholders and draft documents such as letters and employment contracts

. Good command of MS Office applications

. Excellent interpersonal skills, and strong decision-making skills

· To leads a team of QS in tendering projects

· To explore on tender opportunities and update on tender listing on weekly basis to management for review

· To highlight on potential tenders from the market to senior management

· To attend site tender briefing

· To conduct briefing with top management on project details

· Delegation of tender work scope to QS and ensure workload of QS is well distributed

· To ensure time completion of measurement and sourcing of quotation

· Ensure tender corrigendum issued is update with tender documents

· Reviewing quotations and / or comparison of quotations by QS

· Reviewing tender documents / drawings on contract requirements

· Conduct internal meeting with QS on issues of tender

· Post tender review

. Strong time-management and organizational skills

. Ability to coordinate several tasks at the same time

. Ensuring pre-qualification and tenders are undertaken to meet Clients requirements and sufficient resources are available to complete tenders

. Provide leadership advice and support to staff within the Team

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to [email protected].

Job Summary:

• Industry: Healthcare
• Employment type: Permanent, full-time
• Working location: Kent Ridge

Job Responsibilities:

• Coordinate and support clinical quality and safety programmes within the organisation.
• Play an active role in identifying, coordinating and participating with relevant departments in developing quality models, standards development, design and implementation of audits and risk management activities.
• Ensure accurate data collation and compilation for various clinical quality activities including clinical performance indicators.
• Provide support to QA and Clinical Services committees and continuously seek opportunities to improve work processes and highlight areas for improvement.
• Manage incidents and serious reportable events and conduct root cause analysis.
• Demonstrate management skills necessary to work effectively with internal and external stakeholders/partners across the system and work with teams across the hospital and institutions.
• Facilitate presentation of improvement efforts and ongoing measures of clinical processes to management to enable an effective learning environment.

Job Requirements:

• Possess a bachelor's degree from a recognized institution
• At least 3 to 5 years of relevant working experience in healthcare. Working experience in medical affairs and clinical governance is preferred.
• Excellent data analysis, communication, writing and problem-solving skills
• Exceptional interpersonal and people management skills
• Positive, motivated and able to perform under pressure

By submitting any application or résumé to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret that only short-listed candidates will be notified.

Registration No: R24123448 / EA Licence No: 12C6253