Job Description:

· Able to install and repair electrical wiring, systems & fixtures in buildings.

· Assist the operations teams with electrical troubleshooting and repairs

· To perform corrective / preventative maintenance on equipment

· Having experience installing and repairing plumbing fixtures

· Ensure that the work area is safe and clean

• To develop and submit a Project Interface Plan (PIP) which manages the interface management process throughout the project life cycle.
• To be responsible for the project wide internal and external interface management activities.
• To conduct weekly interface meeting with all stakeholders and interface manager of all contractors (including SC, direct contractors / specialists to be appointed)
• To manage and coordinate with interface manager of all systems to incorporate the finalised interface details into the overall combined services plans /BIM
• To work with BIM coordinator and be responsible for the BIM coordination for development of BIM Model.

Job Requirement

Shall possess an Engineering Degree with at least 10 years of relevant working experience in M&E services coordination OR

A diploma with at least 20 years of relevant working experience in M&E services coordination.

Job Description

• Prepare a lifting plans normal and critical lift plans
• Coordinate and Supervisor overall site lifting activities
• Conduct coordination and logistic meeting with subcontractors
• Visual Inspection of Cranes and lifting equipment’s
• Help site team in planning proper lifting equipment for required lifting works

Requirements

• 5 Years and more as Lifting supervisor/coordinator at construction site
• Lifting appointed person certified will be preferred
• Familiar with rigging techniques of construction material

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

Job Scope

· Process payroll transaction, calculate staff & general worker’s overtime, and CPF submission.

· Maintain employee annual leave database and process petty cash.

· Prepare employment contracts, KETS (for staff), letters of appointment, and confirmation/ termination letter.

· Prepare job description, post job ads and source for suitable candidates.

· Proper filling for all the invoices and payment vouchers.

· Submission of year-end IR8A and IR21.

· Updating MOM Labour Survey and Occupational Employment Dataset (OED).

· Assist in ISO & GGBS Renewal & Surveillance Audit, BCA registration renewal, GeBiz renewal and BizSafe Renewal.

· Submission of application/ renewal for the Contractor Registration and Builder License under eBACS.

· Compile the relevant business documentation used in banking process.

· Maintain accurate financial records and statements.

· Record transactions and events relating to sales, purchases, receivables, payables and cash.

· Issuing and process payment vouchers

· Preparation and monitor weekly/ daily cash flow.

· Coordinate and liaise with insurance for Performance Bond / Advance Payment Bond matters.

· Coordinate and liaise with insurance agent for Foreign Workers Hospitalisation Insurance renewal, WICA renewal and Machinery Insurance.

· Coordinate with valuer for the machinery valuation matter.

· Perform ad-hoc duties as assigned.

Requirement

*Education: A certificate, diploma, or higher qualification in accounting, administration, or a related field

*Skills: Proficiency in Microsoft Office and the internet, and the ability to use accounting software like MYOB

*Experience: At least two years of relevant work experience

*Language: Proficiency in writing and speaking English

*Other skills: Ability to multitask

Roles & Responsibilities:

• Prepares, develops, finalises, effects, modifies and monitors the long term, short term, annual and periodic budgets and plans for the organisation. Update Owners about their progress and provides logical and rational explanation for variations in their achievement.
• Controls the operations of the organisation including financial, engineering, procurement and administration by providing management support and direction to departmental heads and their respective teams. =
• Responsible to ensure the development, enforcement, maintenance and updating of suitable systems, policies and procedures within the organisation, in order for the company to carry on its activities smoothly. Coordinates, reviews and approves the preparation of policy manuals, safety standards and quality guidelines and ensures the adherence of company employees to these documents.
• Responsible to ensure the profitability of the company and return on investment for the owner/partner. Approves the pricing for tenders/projects, ensures that project expenses are well within the contract price and monitors the income and expenditure of the company for budget compliance and cost control. Performs regular analysis on the fiscal health of the organisation, takes suitable remedial measures if required, and re-orients the organisation towards financial sustenance.
• Maintains relationship with old and existing clients/consultants/contractors/sub-contractors with regular follow up meetings and sources new clients by applying a focussed marketing approach. Presents the company and its activities to clients, pre-qualifies, tenders, negotiates and finalises new projects for the company to execute.
• Responsible for the recruitment of qualified, skilled and experienced personnel and their termination. Monitors employee productivity and performance in a periodical manner and ensures the provision of professional and personal growth opportunities. Provides motivation, leadership initiative, guidance to the employees and ensures the maintenance of high morale within the company. Ensures the application of fair, ethical and nondiscriminatory employment practices and provides an equal employment opportunity environment within the organisation.
• Assesses and evaluates market conditions, trends, associated risks and sets out suitable solutions to overcome downturns, crises and abnormalities. Continuously identifies and develops opportunities for the company to expand its products, services, functions and area of operation
• Performs other duties as assigned by the Owner.

Requirements:

• Graduation from a four-year college or university with a degree in civil engineering, or closely related field
• A minimum of eight years specific experience including multiple projects management in engineering, construction management or in a closely related field of building structures.
• At least two years responsibility in an operational role covering responsibilities of estimation, planning, purchase, project management, accounting departments/individuals. Previous experience or close association in a role with full operational responsibility in a construction environment.

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

• Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.
• Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.
• Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.
• Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.
• Handle all accident and incident reports.
• Work as a team with project team members and sub-contractors to provide a safe working environment.
• Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Certified NEA, ECO, ECO, ECMO
• At least 3-5 years' on-site experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Job Scope

• Operate and maintain production machinery to ensure efficient and safe operation.
• Assist in the preparation of meat products, minimizing waste.
• Pack, weigh, and label completed products according to company standards.
• Maintain a clean and hygienic work environment, including equipment and tools.
• Perform other ad hoc tasks as assigned.
  

Job Requirement

• Ability to work in a fast-paced environment
• Attention to detail and commitment to quality
• Good interpersonal skills

Working Days

6 days

Mondays to Saturdays

Job Scopes

• Keep track and sorting of invoices

- Keep track and look for missing invoices (invoices that are not back yet, invoices that are given back to

customer)

- Print invoices that are not back and pass back to driver for signature and chop.

- Photocopy incorrect invoice for credit notes, debit note and other corrections.

- Make sure the customer and driver sign and chop on the invoices.

- Print missing NTUC invoices, Goods Received Note or Purchase invoice for filing if it is found on the website.

- Modify and print out daily list for invoice sorting.

- Ask for reason as to why the invoices are not back yet.

- Scan invoices requested by customer

• Matching for DFI and NTUC invoices.

a. Update Excel for both DFI and NTUC

b. NTUC

- Photocopy incorrect invoices and print out Purchase Order for Credit note, Debit Note.

- Inform Order desk to ask the customer to reopen or modify purchase order if they are closed, incorrect

or did not open purchase order.

- Scan and submit invoices for matching.

- Look for Purchase order/ Good Received note on the website if the invoice is returned without the

Purchase Order and Good Received note Number/ Attachment.

- Submit the Credit note/Debit note along with invoices.

c. DFI

- Create/modify master list to be submitted to DFI for invoices that needs to be rectify or added in for

matching.

- Photocopy the incorrect invoices and submit to DFI.

- If Credit note is done, ensure the amount is correct and submit.

Requirements

• Minimum relevant diploma qualifications
• Strong communication skills
• Able to multi-task
• Able to work under time pressure
• Fluent in Chinese and English

5.5 working days

8:30am to 5.30pm (Mondays to Fridays)

8.30am to 12.30pm (Saturdays)

• Oversee and coordinate landscaping works.
• Plan and attend regular meetings with clients for projects.
• Prepare landscape proposals, maintenance schedules and reports.
• Prepare purchase orders for various types of plants.
• Provide professional advice on the selection, ordering, planting and maintenance of trees, shrubs, groundcovers and turf grasses.
• Attend to feedback and complaints concerning horticultural matters.
• Ensure horticultural contract specifications meet satisfaction.
• Prepare horticulture and management reports.

Job requirements:

• Should have Certified Practicing Horticulturist(CPH) Certificate
• Diploma/Degree in Horticulture
• LOCALS PREFERRED

Responsibilities

• Keeping accurate records pertaining to inventory and account notes.
• Maintains supplies inventory by checking stock to determine inventory level.
• Filing, typing, report preparation & Data entry.
• Assist in the documentation.
• Knowledge in the basic accounting.
• Monitor costs and expenses to assist in budget preparation

Responsibilities:

• Accountable to maintain & monitor the schedule of equipment’s’ renewal as to fulfil the statutory requirements (e.g. Lifting gear)
• Responsible to raise the departmental purchase requisition for approval
• Handle and coordinates on the incoming and outgoing invoices and delivery orders
• Work with Logistic Assistant to cross check and confirm on the machinery movement for billing
• Perform data entry and ensure on the accuracy
• Maintain appropriate filling of documentations for easier retrieval
• Ensure the practices and procedures meet legal guidelines, and health and safety requirements
• Ensure safety practices and housekeeping are maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Requirement:

• Diploma in Supply Chain Management / Business Administration or any other relevant field of studies
• 1 years relevant experience
• Computer skills and Microsoft Office

Other Information:

• Working hour: 5 days work week
• Company transport provided

• Plant care: Monitoring seedlings and trees, ensuring they have enough water and nutrients, and applying pesticides
• Maintain nursery upkeep: Ensure that the nursery is well maintained and compliant of all laws and regulations
• Plant selection: Selecting seeds, bulbs, and cuttings, and determining the types and quantities of plants to grow
• Purchasing: Selecting and purchasing seeds, plant nutrients, disease control chemicals, and garden and lawn care equipment
• Quality improvement: Developing and maintaining a positive attitude towards quality of products and services rendered to customers
• Production methods: Evaluating, documenting, costed, recommending, and implementing new and improved production methods

Summary

The incumbent reports to the Senior Quality Engineer and is responible for the following areas of work

• Incoming inspection
• Shipping documentation and verification
• QMS documentation review
• QC material lab testing
• New product development testing
• In-house continuous improvement projects
• Support on material failure investigation

Description of Responsibilities & Duties

• Incoming inspection, Shipment documentation and verification 50%
• QMS documentation, Document Handling and verification, QC material lab testing 20%
• In-house continuous improvement projects, support on material failure investigation & new product development testing 20%
• Ad-hoc duties as assigned by supervisor 10%

Knowledge & Skills

• Basic understanding of metallic materials and precision engineering process
• Basic understanding of ISO 13485 and MSA
• Competent with Microsoft Office tools.
• Science/Engineering technical qualification.
• Knowledge in inspection, measurement system, and document control

Education & Experience

• Higher Nitec & Above (Material Science related)
• Minimum 1 years of relevant working experiences
• Some experience in Shipment documentation & verification and QC inspection

Job Scope:

Install, configure, troubleshoot, and support servers running on Windows and Linux operating systems.

Perform routine system maintenance tasks such as patching software, updating firmware, and conducting hardware evaluations/upgrades.

Manage user access control by setting up accounts, permissions, and ensuring adherence to company policies regarding data security.

Oversee the administration of internal resources including Active Directory (for Windows) or LDAP (for Linux), file sharing services, and print servers.

Monitor network traffic/server utilization to identify potential issues before they become critical problems; implement performance tuning strategies when necessary.

Administer SAN/NAS environments including disk provisioning, LUN management, zoning, fiber channel networking etc.; ensure efficient operation with minimal downtime through proactive monitoring/maintenance practices

Develop/implement backup recovery plans for critical data stored across various platforms;

Conduct regular audits/capacity analysis reports in order to plan for future growth needs while optimizing current resource usage.

Job Requirements:

Degree in Computer Science, Information Systems or related field preferred;

Minimum 5 Years work experience will be considered

Proficient in BIM software and AUTOCAD will be an added advantage

Good interpersonal and communication skills

Proven track record managing both Windows/Linux server environments

Experience with virtualization technologies like VMware/Hyper-V is highly desirable

Knowledgeable about configuring/maintaining enterprise-level storage solutions (SAN/NAS)

Strong analytical/troubleshooting skills combined with excellent communication abilities

Ability to document processes/procedures clearly concisely

Able to handle any adhoc jobs based on our Industry

Responsibilities

• Maintenance of invoices i.e. scanning, updating and posting of invoices in system
• Processing of payments to vendors and perform bank reconciliation
• Liaison with vendors for missing invoices/payment status
• Attach daily bank advice in accounting system
• To perform ad-hoc duties as per assigned

Requirements

• O Levels/ LCCI / Certificate / Diploma in Accountancy or equivalent
• Computer skills and Microsoft Office
• Minimum 1 year of related experience

Carry out day-to-day site operations and supervise construction workers.

Carry out inspection as well as resolving and monitoring rectification works.

Assist and support Engineers in carrying out works as assigned.

Supervise the construction of works and incorporation of materials and ensure that they are carried out in accordance with the Project Plan.

Assist the Engineers in ensuring that the works are carried out to schedule and in accordance to relevant regulations.

Ensure company’s safety rules are observed and obeyed.

Cooperating and communicating effectively with project manager and other project participants to provide assistance and technical support Performing overall quality control of the work (schedule, plans, personnel’s performance) and reporting regularly on project status.

Any ad hoc duty will be assigned.

Carry out day-to-day site operations and supervise construction workers.

Carry out inspection as well as resolving and monitoring rectification works.

Assist and support Engineers in carrying out works as assigned.

Supervise the construction of works and incorporation of materials and ensure that they are carried out in accordance with the Project Plan.

Assist the Engineers in ensuring that the works are carried out to schedule and in accordance to relevant regulations.

Ensure company’s safety rules are observed and obeyed.

Cooperating and communicating effectively with project manager and other project participants to provide assistance and technical support Performing overall quality control of the work (schedule, plans, personnel’s performance) and reporting regularly on project status.

Any ad hoc duty will be assigned.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.

Planning, implementing and monitoring Site work schedule.

Coordination the activities concerned with technical development, scheduling, resolving technical problems, quality assurance, testing and inspection.

Check working drawing, identify discrepancy for resolution.

Settlement of project disputes during execution of project.

Carry out design, material requisition, cost control, project supervision and documentation.

Handle technical and engineering problems.

Plan and execute work schedule based on contract schedule.

Coordinate and control construction works on site.

Evaluate subcontractors risk assessment, safe work procedures and method statements.

Review subcontractors/supplier performance after completion works.