Singapore

At Rolls-Royce, we pioneer cutting-edge technologies that deliver the cleanest, safest and most competitive solutions to our planet’s vital power needs. We embrace the power of data and technology and aim to be Digital First in everything we do.

Key Accountabilities

• To provide Quality and Safety leadership and expertise both internally and across the external Maintenance, Repair and Overhaul network for the APAC region to define and deploy strategies that drive quality improvement at pace.
• To provide Quality and Safety leadership to drive supplier maturity and improvement across the APAC region to deliver performance that enables the business to achieve its goals and enhance its reputation.
• Coach and lead suppliers to deliver an effective Zero Defects and Zero Harm strategy, underpinned by Quality Improvement Plans, whilst ensuring the Supplier has all the relevant prevention skills required.
• Development with the Supplier of their Quality Management System to ensure readiness for approval.
• Communicate a simple, compelling and consistent vision which suppliers understand and want to be part of.
• Engage and influence a wide range of people at all levels both internally and at Suppliers.
• Coach suppliers in complying with relevant requirements including MRO SABRe, Safety Management System and external / regulatory standards.
• Contribute to sourcing decisions by performing pre-selection assessments (ESSCA).
• Govern the delivery of the Quality performance (KPIs) of the aligned suppliers through performance and compliance monitoring to maximise efficiency and effectiveness in meeting requirements, business goals and enhancing its reputation. Where Quality performance diverges from target, drive and coach the suppliers on recovery.
• Protect the business and customer through performing, governing and coaching of problem containment and resolution methods and tools for aligned suppliers, to minimise impact and to ensure the necessary corrective and preventative actions are completed and verified in a timely manner. Ensure the effective governance of Problem Management exists in the aligned suppliers.
• Implement and ensure compliance to the SMT Operating System / Governance across the External MRO Network via implementation of a standardised Quality Governance across the MRO Network and in alignment with SMT priorities.
• Drive the deployment of the Supplier Maturity Assessment programme with identified Suppliers, by ensuring adherence to plan and a robust improvement plan is in place for each Supplier.
• Ensure suppliers self-lead improvement and engage appropriate internal and external resources.

Key Experiences and any Qualifications

• You will be Degree qualified or equivalent
• ​Demonstrated levels of leadership and influence
• Demonstrated MRO Part 145 knowledge essential
• You have demonstrated experience and track record of delivering results in a Quality Management role in an MRO Part 145 environment
• You can demonstrate good knowledge of relevant international standards or regulatory requirements
• You will have experience of root cause analysis, problem solving / 8D investigation methods and process improvement techniques.
• You will have experience in terms of containment activities and be able to provide regular updates to internal stakeholders.
• You will have a strong customer focus, able to effectively influence and challenge appropriately to manage customer expectations.
• Lean six-sigma Green Belt or Black Belt accredited, but not essential

Pioneer an enduring legacy. Join us and you’ll develop your skills and expertise to the very highest levels, working in an international environment for a company known the world over for brilliance and innovation.

Pioneers of Power

We are an equal opportunities employer. We’re committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we’ll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realize their full potential.

You can learn more about our global Diversity and Inclusion strategy here.

So that you can be your best at work and home, we’ll consider flexible working arrangements for everyone, in any role. Click here for more details on how we can support you. Click here for more details on how we can support you.

Rolls-Royce follows a merit-based employee recruitment process and does not charge/accept any payment/security deposit from candidates during the recruitment process. Candidates seeking employment with Rolls-Royce should be cautious of potentially fraudulent communications and offers from individuals and agencies purporting to be from, or acting on behalf of, Rolls-Royce.

Please refer to the Career section on the Rolls-Royce website to verify employment offers or vacancies. Rolls-Royce shall not be liable for any loss, damage or consequences that may arise from any communication or offer of employment not directly made by Rolls-Royce.

Rolls-Royce reserves the right to take legal action against any individuals or agencies acting on behalf of Rolls-Royce without authorisation.

RESPONSIBILITIES:

• Develop and update the quality material database and ensure proper recording and documentation
• Ensure proper documentation of raw materials/ ingredients/ finished products & traceability in place
• Liaise with regulators on mandatory requirements and compliance related matters
• To provide internal and external customers with technical advice and/or documentation when required
• Assist in the maintenance of HACCP and BRCGS management system

REQUIREMENTS:

• Diploma / Bachelor's Degree in Food Science or related field.
• Good knowledge of Quality Management System (HACCP, BRC, ISO 22000)
• Good communication, Organizational and Analytical Skills
• Able to work in a team and independently

Our client specializes in controls design, including conveyor controls, tooling controls, process controls, vision system integration, and UL-certified control systems is in search of

Quality Technician - West

Responsibilities

• Review each circuit of the schematic to ensure proper wiring, confirming correct separation of voltages, communication, main power, and any accessory outlets.
• Verify that all parts match the Bill of Materials (BOM).
• Perform point-to-point continuity tests to ensure correct wiring.
• Check the correct wire gauge and colour.
• Inspect all labels, sit-track tags, for proper placement, accuracy, and cleanliness.
• Apply power to the panel to ensure all electrical components function correctly.
• Verify the paint colour and ensure no damage to the paint job.
• Document any discrepancies on the corrective action sheet and inform the appropriate team leader for necessary corrections.
• After repairs, recheck and verify that corrections are complete, initial the "checked by" box on the corrective action sheet.
• Sign off in the "QC checked by" box for the quality inspector on the QA sheet.
• Release the enclosure for dock audit and prepare it for shipment to the customer.

Requirements

• Minimum Nitec and above or its equivalent
• Ability to read and interpret electrical schematics preferred
• Knowledge of controls design preferred.
• Ability to work both independently and within a team

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected]stating your current and expected remuneration together with notice period required to current employer.

EA License No: 12C6254 | EA Personnel Registration No: R1879665

Mon to Fri 8.30am - 5.30pm

Job Summary

Responsible for management of Asia Quality System, Policies, Programs and Initiatives. Part of the Global Quality Team to maintain global quality system and drive global initiative.

Role and Responsibilities

Quality Systems

1. Supports overall maintenance of quality systems

2. Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team

3. Maintains the Master control and ISO document control system

4. Maintains customer related documents such as Quality Agreement, PPAP

5. Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

6. Ensures effective implementation of all company quality policies

7. Implements ISO and other recognized standards

8. Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.

9. Sets, communicates, and implements quality objectives in line with business goals

10. Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.

11. Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.

12. Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

13. Leads ISO quality standards implementation as Management Representative.

14. Conducts and leads quality audits to specific quality standards.

15. Leads customer related audits

16. Conducts supplier audits

17. Conducts internal audit investigations for product quality and process issues

18. Responsible for ensuring timely resolution to audit findings

Training

19. Provides training for all employees on basic quality and statistical concepts

20. Provides training to appropriate personnel for updates and changes to quality policy

21. Attends relevant external training sessions/courses and shares learning internally

Job Requirements:

• Degree or equivalent experience in a field of study such as chemistry, business, accounting, engineering, etc.

• Certificate in Quality Engineering is preferred.

• Position requires 3-6 years of quality management experience.

• Good experience into customer & supplier audit and able to conduct training

• ISO 13845 experience will be added advantage.

• Demonstrates introductory understanding and ability and with guidance, applies competency in typical situations.

• Able to design quality systems to meet customer expectations and internal needs. New approaches and continuous improvement must be ongoing

• Good interpersonal skills to be able to communicate and collaborate with all stakeholders and deal with situation proactively

• Junior with 1-2 experience in related field can also apply

• Occasionally overseas travel and weekly conference call is required for the role

• This position required to communicate closely with vendors in China.

Salling Search is currently recruiting for an experienced Quality Systems Manager for a reputable and established shipping company in Singapore.

Responsibilities

Quality Improvement and Monitoring

• Develop and implement a product quality improvement plan aligned with organizational goals.
• Monitor product quality metrics, analyze warranty data, and identify areas for continuous improvement.
• Conduct audits, assessments, and collaborate with suppliers to address quality risks.

Corrective and Preventive Actions

• Lead cross-functional teams to identify root causes of quality issues.
• Develop and implement corrective and preventive actions to mitigate future risks.
• Identify and communicate process and product improvements proactively.

Collaboration and Stakeholder Engagement

• Work closely with engineering, manufacturing, suppliers, and classification societies to ensure consistent quality.
• Build relationships with partners, customers, contractors, and official bodies.
• Liaise with shipyard personnel and management to ensure product quality meets organizational objectives.

Documentation and Compliance

• Develop and manage quality improvement documentation and reporting.
• Maintain a thorough understanding of product specifications, classification rules, and warranty claim processes.

Customer and Field Engagement

• Conduct customer familiarization with products and gather operational feedback.
• Travel occasionally to operational areas for fact-finding and quality assurance.

Professional and Interpersonal Skills

• Communicate effectively, build trust, and negotiate compromises when necessary.
• Stay updated on industry best practices and continuously develop professional skills.

Qualifications

• At least 6-8 years in management or supervision of marine vessel construction, operation, or maintenance with a proven track record.
• Formal marine or engineering qualifications are highly desirable.
• Strong negotiation, dispute resolution, and commercial acumen.
• Excellent communication and teamwork abilities.
• Proficient in managing documentation and records.
• A strong network of suppliers, subcontractors, and contacts is highly desirable.

We love building HR software. And surely we can do better – with your help.

What We Value:

• You have initiative and are innovative
• You seek ownership in your work
• You have passion and ambition
• You love challenges and look for responsibilities
• You have a sense of humour (we love a good joke)
• You possess good English written and spoken communication skills

Responsibilities

• Create, maintain, and execute automated regression test suite for mobile and web applications
• Develop and maintain test plans, testing strategies, test cases, test data, matrices, and other QA related documentation
• Work with the Engineering Team to continuously improve test coverage to improve quality of released products
• Keep up to date on the latest tools, industry trends and technologies for software testing and put them to good use!

Requirements

• Degree/Diploma in Information Technology, Computer Engineering, Computer Science or related fields
• MUST HAVE:

1. At least one (1) year of experience in test automation experience
2. At least one (1) year of experience working in an agile environment.
3. Familiar with at least 1 test automation tool software (e.g. testsigma, selenium, Telerik, etc.)
4. Strong understanding of Software QA methodologies best practices to design, build and execute unit, functional and integration test cases
5. An independent, resourceful, result-oriented and analytical thinker.
6. Experience with Git and Jira
7. Strong oral and written English communication skills

We appreciate people who are constantly working towards improving themselves. If you ever find yourself facing an issue, as a team, we’ll find the solutions together.

When’s a better time to join HerdHR and shape the product of the future? We say NOW.

NOTICE

We regret to inform that only shortlisted candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read and agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Consequences of Not Providing Personal Data for Transaction/Service/Application

Please be noted that should you not consent and provide use with the relevant personal data to fulfil the “Purposes” of collection, use and disclosure of your personal data by HerdHR, it may hinder our ability to continue to interact with you. We may not be able to make a decision on your recruitment and employment or comply with the law and therefore, we may not be able to make an offer of employment

You may refer and access our website for more information.

Our client is a private hospital and we are looking to expand our team!

• To collaborate with Education and Training Department, department’s Nurse Managers/Clinician and other healthcare professionals in the development of on-the- job training and nursing-related clinical competencies, Standard Operating Procedures (SOPs) and Work Instructions
• Assist in providing initial and ongoing on-the-job training for nurses in the respective department.
• To perform clinical supervision and support newly employed nurses in the respective department.
• Act as a resource person to nurses on clinical and nursing quality-related matters.
• Enhance professional nursing development in respective department through continuous mentoring, coaching and role modeling.
• To assist Nursing Quality in the management of Nursing Quality issues as to ensure high standards of nursing practice at the respective department.
• To promote a culture of safety, quality and service excellence by constant monitoring of compliances.
• To participate in nursing quality improvement-related projects.
• To participate in physician rounds and collaborate with physicians and other allie healthcare professionals so as to ensure continuity of patient care.
• To ensure correct billing of consumables used for patients.
• To perform other assignments as and when required by the Nurse Manager/Clinician.

Requirements:

• Possess a valid SNB Registered Nurse Practising Certificate.
• Diploma/Degree in Nursing with a strong clinical nursing background.
• Advanced Diploma in Nursing (Orthopedic, Oncology, Med-surg)
• Clinical Instructor certificate is preferred.
• Possess a valid BCLS and AED certificate.
• Minimum 5 years of Clinical experience
• Able to commit to morning and afternoon shifts

Job Summary

We seek an experienced and motivated Software Quality Engineer to join our forward-thinking tech team. In this role, you'll ensure our platform is reliable and meets high-quality standards. This position allows you to work across teams, shaping and implementing advanced QA processes that support scalable, reliable, and innovative solutions

Responsibilities:

Test Strategy and Planning

- Define and lead comprehensive QA strategies, covering all phases of the software development lifecycle.

- Develop, manage, and execute manual and automated test plans, cases, and scripts to ensure thorough testing.

Automation and Tooling

- Lead the development of automated testing frameworks using Cypress, Playwright or any automation tool for end-to-end test coverage.

- Drive platform scalability by implementing performance and load tests using tools like Gatling, K6, or Jmeter.

Quality Assurance

- Perform contract testing to ensure smooth interaction between microservices.

- Lead regression testing efforts for bug fixes and new features to maintain overall quality.

- Oversee the end-to-end testing pipeline, resolving issues promptly to avoid any delays.

Cross-Functional Collaboration

- Work closely with product managers, developers, and DevOps engineers to meet project requirements and deliver high-quality software.

- Contribute to agile team processes, including sprint planning and other ceremonies, with valuable QA insights.

- Coordinate with QE teammates to prepare and lead weekly deployments, ensuring smooth execution.

Issue Resolution and Reporting

- Accurately document, track, and report software defects, conducting root cause analysis as needed.

- Provide timely and detailed reports on QA activities, testing outcomes, and relevant quality metrics.

Requirements:

- Expertise in software quality assurance, with a strong focus on automation testing (e.g., Cypress, Playwright).

- Demonstrated experience with performance testing tools such as Gatling and Autocannon.

- Proficient in JavaScript (TypeScript) or Java

- Familiar with frontend and backend technologies (e.g., ReactJS, ExpressJS, Gin-gonic), as well as cloud platforms (AWS, Docker, Kubernetes).

- Knowledgeable in CI/CD tools (e.g., GitLab, ArgoCD) and relational databases (MySQL, PostgreSQL).

- Solid understanding of REST and GraphQL APIs, JWT for authentication, and search technologies like Elasticsearch.

- Exposure to additional testing tools and caching systems like Redis.

- Experience with logging and monitoring platforms such as Splunk or OpenSearch.

Qualifications

- Bachelor’s degree

- Strong problem-solving, analytical, and communication skills.

Responsibilities:

• Same as Associate Consultant but with an increased level of responsibility, including leading the test strategy development and mentoring junior testers.
• Take on more complex test automation projects and drive improvements in test processes.
• Manage cross-functional teams to ensure quality standards are met throughout the development cycle.
• Provide technical leadership for test automation and work closely with Product Owners and developers to ensure optimal test coverage.

Experience and Skills Needed:

• More than 4 years of experience in exploratory testing and automation.
• Proven experience in leading test automation initiatives and mentoring junior team members.
• Strong understanding of Agile testing practices and tools.
• Excellent communication and leadership skills.

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

MKS is committed to being the highest quality and reliability provider of laser-based manufacturing systems for leading electronics and device manufacturers world-wide; helping them to optimize production of the materials, components and systems that are an integral part of the electronic devices in use today.

As part of the mission, the Quality Test Technician will be supporting EE Test Engineering in troubleshooting and repair activities on ESI PCBA/Control units.

Key responsibilities:

• Conducting First Article Test on new Subsystem, PCBA and Cable assemblies. Analyzing and determining hardware test requirements, supporting Test development activities.
• Maintain, Modify and Improve Test System hardware and fixtures.
• Support Engineers to deploy the new Test Fixtures at Production and external supplier. Resolve the Test Fixtures and Equipment issues on time.
• Perform hands-on assembly, set-up, testing, troubleshooting of PCBA and prioritize to resolve the issues.
• Support of FPY improvement activities and determines root cause of Manufacturing low Yield / Quality issues.
• Support Engineers to setup and conduct experiment/tests, compile and analyze data.
• Handle Field failures troubleshooting and provide updates to Engineering team to prevent future occurrences.
• Incorporate continuous improvement concepts and techniques into all aspects of Job.
• Inspect incoming mechanical parts and materials to ensure they meet required specifications and quality standards.
• Performs other duties as assigned by supervisor based on business needs.

Requirements:

• Minimum of three (3) years of experience in PCBA Testing and troubleshooting is preferred.
• ITE / Diploma or higher in engineering or equivalent.
• Able to read and interpret Electrical Schematics, Specifications and Manufacturing manuals.
• Experience with test equipment e.g. function Generator, Oscilloscope etc.
• Good written and verbal English language communications skills.

Responsiblities:

• Ensure that the design and construction works comply with all the relevant statutory acts, regulations and practices.
• To manage and responsible for all documents for the project(s) & other works being assigned from time to time.
• Site inspection, planning and other site activities, etc.
• Ensure and responsible for all safety & compliance of work on site.
• Monitor & Coordinate Project Progress.
• Ensures delivery and receipt of all project documents by deadlines.
• Generate various project document control reports as required.
• Control of all Materials.

Requirements:

• Degree in Building / Civil Engineering
• Minimum 05 years experiences in relevant field
• Good interpersonal and communication skills
• Able to work in Jurong Island
• Mon to Sat (Ability to work beyond normal working hours)

Responsiblities:

• Ensure that the design and construction works comply with all the relevant statutory acts, regulations and practices.
• To manage and responsible for all documents for the project(s) & other works being assigned from time to time.
• Site inspection, planning and other site activities, etc.
• Ensure and responsible for all safety & compliance of work on site.
• Monitor & Coordinate Project Progress.
• Ensures delivery and receipt of all project documents by deadlines.
• Generate various project document control reports as required.
• Control of all Materials.

Requirements:

• Degree in Building / Civil Engineering
• Minimum 05 years experiences in relevant field
• Good interpersonal and communication skills
• Able to work in Jurong Island
• Mon to Sat (Ability to work beyond normal working hours)

Responsiblities:

• Ensure that the design and construction works comply with all the relevant statutory acts, regulations and practices
• Site inspection, planning and other site activities
• Ensure safety & compliance of work on site
• Monitor & coordinate project progress
• Control of materials

Requirements:

• Degree in Building / Civil Engineering or any related discipline
• At least 3 years experience in relevant field
• Able to work in Jurong Island
• Good interpersonal and communication skills
• Mon to Sat - Ability to work beyond normal working hours

1. Responsible for I&C engineering related matters.
2. Communicate and coordinate with team and all related stakeholders for planning and scheduling to facilitate smooth commissioning at site.
3. Ensure instrument and control elements installation and wire termination are done correctly and within acceptable standard of workmanship.
4. Enforce PSE and MEP to rectify any substandard works to ensure good quality of works for reliable operation.
5. Lead on-site testing and commissioning of chilled water control system, conduct thorough testing, and validation of control system to ensure proper functionality.
6. Documentation and records of T&C.
7. Handover control system to operation team in timely manner.
8. Respond to operational needs, ensure reliable control and monitoring of control system.
9. Configuration and zeroing of instrument, ensure accurate reading received at control system.

Responsiblities:

• Ensure that the design and construction works comply with all the relevant statutory acts, regulations and practices
• Site inspection, planning and other site activities
• Ensure safety & compliance of work on site
• Monitor & coordinate project progress
• Control of materials

Requirements:

• Degree in Building / Civil Engineering or any related discipline
• At least 3 years experience in relevant field
• Able to work in Jurong Island
• Good interpersonal and communication skills
• Mon to Sat - Ability to work beyond normal working hours

Our client provides mechanical and electrical solutions.

• Purchase material for project site based on the product specification and requirements.
• Conduct price negotiation with suppliers, vendors and price comparison.
• Create purchase order and generate monthly purchase reports.

Requirements:

• Certificate in Purchasing or equivalent.
• At least 2 years of purchasing experience in Construction/Engineering industry.
• Proficient in Microsoft Office, meticulous and good negotiation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

The Client is a global aerospace company.

Responsibilities:

• Ensure product and process quality by maintaining the quality management system and complying with relevant regulations and customer requirements.
• Update and improve quality procedures and control instructions.
• Address non-conformance issues with customers, vendors, and suppliers, conduct root cause analysis, and implement corrective actions to minimize quality-related costs.
• Conduct internal audits to assess the quality system, products, and processes (ISO9001 / AS9100 / NADCAP).
• Perform audits of vendors and on-site as needed.
• Adhere to customer and regulatory standards.
• Work to reduce monthly costs associated with poor quality and scrap.

Requirements:

• Degree in Mechanical or Aeronautical Engineering or a related field.
• At least 2 years of experience with ISO9001 / AS9100 Quality Management System and NADCAP.
• Proficiency in problem-solving tools such as fishbone diagrams, FMEA, and the 5-whys methodology.
• Ability to read and interpret technical drawings.
• Strong analytical and communication skills.
• Ability to multitask and attention to detail.
• Familiarity with NADCAP processes like heat treatment, non-conventional machining, shot peening, and chemical processing is a plus.

· Responsible for developing, implementing, and maintaining Quality Plan for FA and production parts.

· Responsible for maintaining company measuring instruments.

· Interpret and analyse customer specifications with great details

· Identify, document, and report defects or anomalies, working closely with cross-functional teams to address and resolve issues promptly.

· Facilitate meetings for production and quality personnels

· Support in internal and external audits.

· Maintaining Company’s Quality Management System (QMS)

· Any other duties as assigned by Supervisor.

Job Requirements:

· Technical certificates in any Engineering field

· Effective communication skills, both written and verbal, to liaise with customers and suppliers

· Ability to work with production and office staffs

· Ability to write root cause analysis

· Flexibility and adaptability to take on new challenges and responsibilities.

· Ability to read and interpret mechanical drawings

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Job Description:

• Assist Product Owner, Business Analyst to craft out user story acceptance criteria
• Analyse and decompose complicated software systems, and design a holistic test strategy
• Research emerging technologies and develop test automation framework
• Develop test suites of test scenarios and test cases.
• Perform time-boxed exploratory testing
• Maintain regression test suite in QA nightly build
• Actively refine the smoke test suite in the Development CI environment
• Lead system integration testing with other systems
• Manage user acceptance testing
• Manage defect life cycle, test artifacts, and repository
• Drive continuous improvement in agile testing practices and tools.
• Improve software quality using XP practices such as code review and unit testing
• Understand the IT management policy, quality management policy and security guidelines to ensure the development processes, procedures and system are designed to comply with these policies and guidelines

Job Requirements:

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines
• Min 3 years experience in exploratory testing and regression test automation
• Strong analytical skills
• Meticulous attention to details
• Good interpersonal skills
• Experience in agile development environment
• Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter)
• Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

We are seeking a highly skilled and experienced Software Quality Assurance (QA) Lead to oversee the testing and quality assurance efforts for our web application projects. The ideal candidate will ensure the delivery of high-quality software by implementing robust testing strategies, managing a team of QA engineers, and collaborating with cross-functional teams to meet project goals and timelines.

Role & Responsibilities:

• Develop and implement QA strategies, test plans, and scripts for web and mobile applications.
• Lead and mentor a QA team, fostering collaboration with development and other stakeholders.
• Oversee all phases of testing, including functional, regression, performance, and security testing.
• Manage manual and automated testing efforts across multiple platforms (PC/Android/iOS).
• Identify and resolve software defects, collaborating with development teams to improve processes.
• Drive the adoption of automation testing frameworks and tools, optimizing test environments.
• Ensure compliance with security, accessibility, and regulatory standards.
• Promote a quality-focused culture throughout the development lifecycle.

Ideal candidate:

• 5+ years in software quality assurance, including 2+ years in a lead role.
• Strong understanding of web application architecture, testing methodologies, and SDLC.
• Experience with QA tools (e.g., Selenium, JIRA, Postman) and automation tools (e.g., Katalon, pCloudy).
• Familiarity with CI/CD pipelines, Agile/Scrum, and DevOps practices.
• Knowledge of performance testing tools (e.g., JMeter, LoadRunner) and scripting languages (e.g., Python, JavaScript).
• Hands-on experience with mobile and Svelte-based app testing frameworks.
• Strong leadership, problem-solving, and communication skills.
• Familiarity with Linux, Windows, Amazon Cloud, and EKS.

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Responsiblities:

• Ensure that the design and construction works comply with all the relevant statutory acts, regulations and practices
• Site inspection, planning and other site activities
• Ensure safety & compliance of work on site
• Monitor & coordinate project progress
• Control of materials

Requirements:

• Degree in Building / Civil Engineering or any related discipline
• At least 3 years experience in relevant field
• Able to work in Jurong Island
• Good interpersonal and communication skills
• Mon to Sat - Ability to work beyond normal working hours