Job description

· Review the safety management system and offer suggestions for enhancement.

· Implement and oversee the ECM Plan as per requirement.

· Collaborate closely to monitor earth control activities at different stages of the project.

· Manage on-site safety audits.

· Investigate incidents/accidents and propose corrective actions to prevent recurrence.

· Ensure staffs adhere to statutory acts, regulations, company safety protocols, and industry codes.

· Demonstrate effective communication abilities to interact with colleagues, clients, and governmental bodies.

· Perform any other ad-hoc duties as assigned.

Requirements

· Diploma in Workplace Safety & Health or equivalent

· Registered WSHO with ECO and ECMO

• Carry out land and engineering surveys required for the construction projects ;
• Carry out setting out of building grid lines before and during the construction stage ;
• Carry out routine building alignment survey during the course of the project
• Diploma or equivalent in Land Surveying ;
• Minimum 5 years of relevant experience in condominium or large projects as Land Surveyor

Job Description

• Responsible for construction planning and scheduling of materials, manpower, plants and equipments ;
• Projection and monitoring the progress of works ;
• Preparation of weekly / monthly progress reports ;
• Coordinate with project team to ensure activities are completed on time.

Job Requirement

• Degree / Diploma in construction related field ;
• Minimum 5 years of working experience as Planning Engineer

1. Assist to identify and correct unsafe conditions and work practices;
2. Provide recommendations for improving safety in the workplace;
3. Ensure that all works are performed according to the approved method statement, risk assessment, and SWP;
4. Maintain all equipment and machinery on site and ensure all required certificates are in place;
5. Conduct and keep record of daily WSHE inspection;
6. Carry out daily joint WSHE inspection together with sub-contractor’s WSH Coordinator/ Supervisor and timely rectify any unsafe acts or conditions;
7. Maintain documentation of the company's safety procedures, accidents and related events;

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

Job Description:

• Lead the project team in the delivery of the project.
• Control the time, cost and quality of the project.
• Plan and coordinate all aspects of the construction process.
• Management of the construction project in order to meet the construciton timeline with cost efficiency without compromising quality and safety.

Requirements

• Possess bachelor’s degree in civil engineering or construction related degree
• Minimum 5 years of experience in completed condominium or large projects as Project Manager

Job Description

1)Evaluate and recommencing on the award of construction contracts

2) Knowledge of tendering and construction

3) Ability to perform quantity take of and create accurate bill of quantities

4) Estimating and budget costing

Job Requirements

1) Degree/ Diploma in Quantity Surveyor

2) Min.2 years in Building & Construction Industry

1. Primary Responsibilities

• Quality Planning & Documentation: Develop, implement, and maintain a project-specific Quality Assurance (QA) and Quality Control (QC) plan that aligns with BCA CONQUAS standards, ensuring all quality processes meet assessment criteria.
• CONQUAS Compliance Monitoring: Monitor construction activities to meet CONQUAS requirements, ensuring each component (structural, architectural, and M&E works) adheres to the system’s quality benchmarks and detailed criteria.
• Material Inspection & Testing: Oversee the inspection and testing of materials used on-site, ensuring conformity with BCA-approved materials and standards under CONQUAS. This includes managing third-party testing agencies when required.
• Site Audits & Inspections: Conduct frequent site inspections and audits focused on CONQUAS criteria, including workmanship, material application, and defect minimization in structural, architectural, and M&E works.
• Non-Conformance Management (NCR): Identify, document, and address non-conformances, particularly those impacting CONQUAS scoring. Recommend corrective actions, ensuring rectifications align with quality standards to avoid future issues.

2. Collaboration with Project Team

• Coordination with Site Engineers & Supervisors: Work closely with site engineers and supervisors to ensure construction methods comply with CONQUAS specifications, providing guidance on quality protocols and rectifications as needed.
• Client & Consultant Interaction: Act as the primary quality liaison with clients and consultants, updating them on QA/QC matters and addressing quality concerns directly related to CONQUAS scoring.

3. Reporting & Documentation

• Quality & CONQUAS Reports: Prepare quality and assessment reports, including checklists and summaries that reflect compliance with CONQUAS scoring standards, inspection records, and non-conformance resolutions.
• Record Management: Maintain comprehensive QA/QC records, including BCA CONQUAS documentation, material certificates, inspection logs, and testing results.

4. Technical Skills and Knowledge

• CONQUAS Standards & Guidelines: In-depth knowledge of BCA’s CONQUAS standards, especially in structural, architectural, and M&E works criteria, assessment scoring, and inspection guidelines.
• Inspection Techniques & Tools: Proficiency in inspection techniques and tools that align with CONQUAS criteria, including non-destructive testing (NDT) and visual inspection practices.

5. Training & Development

• CONQUAS Training for Team: Train the construction team on CONQUAS requirements, quality assessment protocols, and best practices to enhance work quality and scoring.
• Continuous Improvement: Promote continuous quality improvement initiatives that reflect CONQUAS requirements, addressing observed quality gaps with updates to procedures.

6. Qualifications

• Education: Diploma/ bachelor’s degree in civil engineering, construction management, or related field
• Experience: 3-5 years of experience in a QA/QC role within the construction industry, with added experience in managing Quality Marks assessment processes or certifications a significant advantage
• Certifications: BCA-Approved CONQUAS training or relevant quality certification such as ISO 9001:2015 in Quality Management Systems.
• Skills: Strong analytical skills, attention to detail, and the ability to assess and improve quality standards.

7. Key Competencies

• Attention to Detail: Strong focus on details in line with CONQUAS quality metrics for structure, architecture, and M&E works.
• Communication Skills: Ability to clearly communicate quality standards, updates, and CONQUAS requirements to all team members and stakeholders.
• Problem Solving & Decision-Making: Effective in resolving quality issues that may affect CONQUAS scoring, ensuring timely solutions.
• Adaptability: Ability to adjust processes to meet dynamic project needs while adhering to CONQUAS standards.

Job Description

• Work with project team to produce shopdrawings, coordination drawings and as-built drawings on Structural, Architectural and MEP aspects ;
• Maintaining and update the complete set of project drawings.

Job Requirement

• Proficient in operating BIM software with Auto cad/Revit/Tekla;
• Minimum 5 years of experience working as BIM Coordinator (Preferably with A1 Main Contractor)

Job Description

• provide adhoc technical support on daily basis ;
• see through the implementation of custom mobile app ;
• set up and maintenance of servers ;
• procurement and recording of company IT assets ;
• diagnose and troubleshoot technical issues

Job Requirements

• Proven work experience as a Technical Support Engineer, Desktop Support Engineer, IT Help Desk Technician or similar role
• Good understanding of computer systems, mobile devices, mobile applications and other tech products (including maintenance of CPU set)
• Familiar with infrastructure set-up, server/firewall set-up, administration of server and domain (including domain migration)
• Proficient in Microsoft Excel (VBA is a plus)
• Excellent problem-solving and communication skills
• Diploma in Information Technology, Computer Science or relevant fields

Job Description

1) Supervise the work of sub-contractors and work closely with other site operations staff to meet the project schedule.
2) Ensure that works are executed in accordance to specifications.
3) Coordinate with all M&E subcontractors to resolve all technical problems in order to achieve the desired overall project objective.
4) Work together with other project team members to coordinate/resolve technical issues.
5) Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Requirement

1) Minimum 3 years of experience as M&E Engineer in construction related field
2) Diploma/Degree in Mechanical or Electrical Engineering or degree in relevant subject.

Job Description:

• Managing the design and coordination of a team of M&E coordinators, Engineers, and BIM modellers.
• Liase with consultants on matters relating to all M&E works.
• Participate in technical meetings and site meetings.
• To assess and resolve any technical or site issues related to M&E drawings and M&E work with consultants and subcontractors
• On-site supervision of work progress
• Maintaining schedules and coordinating the work of subcontractors.
• Assist in finalising accounts of MYE Sub-contractors.

Job Requirements:

• Degree or Diploma in Engineering or Construction related degree
• At least eight (8) years of relevant experience as M&E Manager in large scale projects is an advantage
• Highly motivated, independent, initiative and responsible.
• Great communication and interpersonal skills.

Job Description

• Supervise all engineering works, restricted activities civil, architectural, electrical and mechanical works carried out by the Contractors, SWCs, etc for all Works within the Railway Protection Zone

Requirements

• Minimum 8 years experience in the construction of civil and structure projects or related field ;
• Degree in Civil Engineering recognised by the PE Board and is registered as Resident Engineer with Institution of Engineers Singapore ;

Responsibilities:

· Carry out drawings and coordination works ;

· Monitoring installation works on site ;

· Effective communication and co-ordination between project participants ;

· Resolving site technical issues ;

· Perform other duties or tasks as assigned by immediate superior

Requirements:

· Degree in Civil/Structural Engineering or its equivalent

· At least 8 years relevant working experience as Structural Coordinator in main contractor office

· Proficient in MS Office, Word, Excel and Project Scheduling software

· Bilingual with good communication skills

Job Description :

• Liaise closely with site team to maintain a high level of safetym, health and environmental standards ;
• Conduct regular inspections to ensure safety compliance to all statutory safety and environmental regulations ;
• Ensure risk assessment and safe working procedure are properly executed on site ;
• Facilitate and conduct audit in order to ensure compliance with ISO14001 and OHSAS45001 standards ;
• Liaise with relevant authorities on all WSH issues ;
• Any related ah-hoc assignment as instructed by the management.

Job Requirements :

• Diploma in Workplace Safety & Health disciplines ;
• Minimum 3 years of relevant experience in construction industry ;
• Registered WSHO with MOM and registered ECO with NEA ;
• Knowledge of ISO 14001, OHSAS45001, GGBS and CONSAS audit.

• To develop and submit a Project Interface Plan (PIP) which manages the interface management process throughout the project life cycle.
• To be responsible for the project wide internal and external interface management activities.
• To conduct weekly interface meeting with all stakeholders and interface manager of all contractors (including SC, direct contractors / specialists to be appointed)
• To manage and coordinate with interface manager of all systems to incorporate the finalised interface details into the overall combined services plans /BIM
• To work with BIM coordinator and be responsible for the BIM coordination for development of BIM Model.

Job Requirement

Shall possess an Engineering Degree with at least 10 years of relevant working experience in M&E services coordination OR

A diploma with at least 20 years of relevant working experience in M&E services coordination.

Accounts Executive

Hexacon Construction is seeking an accounts executive immediately.

What’s on offer

This is a permanent role based at Balestier Road.

· SGD 2,600 - $3,700 monthly, depending on experience and qualifications

· 5-day work week

· 14 days annual leave

· 3 months probation

Reporting to the Finance Controller and Senior Accountant, you are responsible for:

· Maintain accounting general ledgers within accounting software and on Excel

· Perform general ledger, bank, supplier statement reconciliation

· Assist in preparing monthly management accounts, quarterly GST Form 5

· Assist with auditor and tax agent queries, providing of relevant information

· Accurate data entry into claims submission, supplier and payment processing

· Other ad-hoc duties

The successful candidate should:

· Degree / diploma in accountancy

· Ideally, 1-3 years of accounting experience. However, fresh degree / diploma graduates are still welcome to apply

· Meticulous, with an eye for detail

· Spoken and written English proficiency

· Candidates with prior experience with IFCA accounting software will have a significant advantage, but not a must

· Live within the Balestier / Toa Payoh / Bishan area

Job description

· Responsible for the planning, management, and coordination of the MEP Subcontractors testing & Commissioning activities.

· Ensure that the required tests and inspections are performed in accordance with the approved plan.

· Follow-up with subcontractors to resolve any deficiencies that are found.

Job requirement

· Minimum of 10 years engineering experiences in construction industry with relevant diploma.

· Minimum of 5 years construction experience for similar size complexity projects & complexity projects.

1. Primary Responsibilities

• Project Maintenance Management: Oversee maintenance teams’ tasks across multiple project sites, ensuring timely, cost-effective, and quality service.
• Scheduling & Planning: Develop, schedule, and rectification procedure and ensure timely repairs.
• Budgeting & Cost Control: Manage maintenance team expenditures and track expenses, and identify cost-saving measures.
• Quality Assurance: Ensure maintenance team meets industry standards, client requirements, and conmpany’s quality guidelines.
• Risk & Compliance: Ensure adherence to safety protocols, compliance with regulatory and company standards, and mitigate risk on project sites.
• Client Liaison: Act as the primary contact for clients and consultants concerning maintenance and defect rectification.
• Vendor & Supplier Coordination: Manage relationships with suppliers, negotiate service contracts, and ensure materials meet project specifications.

2. Leadership and Team Management

• Team Supervision: Lead and manage maintenance staff, including training, scheduling, and performance evaluations.
• Training & Development: Ensure that maintenance personnel are trained in safety procedures, equipment handling, and troubleshooting.
• Performance Monitoring: Regularly assess team performance, address any gaps, and promote staff development and skill enhancement.

3. Technical Skills and Knowledge

• Technical Knowledge: Deep understanding of construction technology and method used in the industry and expertise in their maintenance and preventive requirements.
• Problem Solving: Diagnose and resolve maintenance issues efficiently to minimize inconvenience to client.
• Safety Standards: Strong knowledge of workplace safety and health regulations, particularly in construction site.
• Software Proficiency: Familiarity with relevant software for planning and record-keeping.

4. Reporting & Documentation

• Maintain accurate records of maintenance activities, including work orders, inspection reports, and incident logs.
• Provide regular updates and detailed reports to management and clients on equipment performance, maintenance costs, and any challenges.

5. Qualifications

• Education: Degree in engineering, facilities management, or related field.
• Experience: At least 7-10 years of experience in a maintenance role, with prior leadership experience preferred.
• Skills: Strong communication, negotiation, and project management skills.

6. Key Competencies

• Analytical Thinking: Ability to assess needs and identify areas for improvement.
• Attention to Detail: Precision in inspection, rectification procedures, and adherence to protocols.
• Time Management: Efficiently prioritize tasks and manage resources to meet deadlines.
• Adaptability: Ability to handle unexpected challenges and adjust maintenance plans as needed.

• Lead strategic planning and day-to-day operations, particularly in relation to buildings and premises by engaging vendor services and maintain their performance.
• Monitor the operations of an organization’s security outfit to ensure effectual performance of duties.
• Ensure the work environment of an organization complies with set health and safety requirements.
• Oversee general staff safety by minimizing exposure to hazards and unsafe conditions.
• Supervise the renovation and repair of damaged building components to ensure proper refurbishing
• Hire and supervise the activities of contractors to ensure they carry out their job responsibilities
• Oversee the management and allocation of space in a building premises.
• Conduct surveys to identify building availability and suitability for lease.
• Carry out financial forecasts to predict potential business opportunities for a company.
• Utilize performance management systems to monitor and determine level of productivity and achievement of set goals.
• Analyze costs of production/supply to identify way to reduce expenses and maximize profits.
• Prepare and manage budgets to achieve set targets and objectives.
• Respond appropriately to emergencies or solve urgent issues arise within manufacturing plant and office building premises in relation to soft and hard facilities management.
• Maintain accurate record of all relevant financial and non-financial details
• Conduct negotiations with vendors and clients to establish the terms, conditions and price of contract services.
• Review operational costs to make appropriate expense adjustments necessary for optimal running of a business.

Overview: -

• 5 Days (Monday to Friday), Office Hours
• East - Loyang
• Monthly Base Salary: $2700 - $3500 (Based on working experience)
• AWS (13th Month) + Variable Bonus

Your Responsibilities: -

• Maintain and update documents and records related to ISO 9001, ISO 14001, and ISO 13485 systems
• Establish and maintain proper documentation control and distribution
• Conduct internal and external audits
• Liaise with external auditors and certification bodies
• Generate monthly reports
• Review and update Quality Management System procedures
• Ensure system compliance
• Manage internal and external corrective action reports
• Plan and conduct periodic system audits
• Maintain and regularly review calibration and preventive maintenance for instruments and equipment
• Direct and head internal audit programs and recommend improvements for internal audit policies and procedures

Requirements: -

• Minimum 2 years of working experience in QMS and ISO 9001 audit, preferably in manufacturing industries
• Good knowledge of ISO 9001, ISO 14001, and ISO 13485 quality system
• Knowledge in preparing FMEA and Control Plans

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

Key Responsibilities:

• Lead First Article Submission (FAS)
• Monitor Supplier Quality Performance
• Supplier Development
• Market Analysis and Process Improvement
• Collaborate Across Teams
• Develop Product Quality Control Plans
• Inspection Coordination
• Ethics, Safety, and Quality Compliance
• Support Company Programs

Required Competencies:

• Accountability: A commitment to personal and team accountability.
• Decision Quality: Ability to make sound, timely decisions based on analysis, judgment, and experience.
• Customer Focus: Deliver customer-centric solutions while building strong relationships.
• Results-Driven: Consistently achieve and measure impactful results.

Qualifications:

• Education: Bachelors Degree in Engineering, preferably Mechanical Engineering.
• Experience: At least 5 years in a similar role; Oil & Gas manufacturing experience is a plus.

Aurora Asia (21C0671) | Stephanie Luan (R21100585)

Job description;

- Prepare and manage detailed project cost estimates, budgets

- Oversee the administration of construction contracts and managing documentation

- Prepare timely payment claims and ensuring all claims and VO are included

- prepare VO claim including the assessment of cost implications, calling quotation, prepare star rate

- Work closely with project managers, engineers, and other construction professionals to ensure project objectives, timelines, and budgets are met.

- Prepare subcon payment and certify work done at site

- to assist contract manager in measurement of quantity and preparation of costing.

Requirement;

- Bachelor’s Degree in Quantity Surveying, Construction Management, or equivalent.

- Minimum of 3 years of experience as a Quantity Surveyor, with experience in LTA projects.

- familiar with PSSCOC, construction contracts, payment claim processes, and VO management.

- Proficient in quantity surveying software

- Team player and able to work with tight schedule.

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Construction Worker/General Worker
• Working Location: Sembawang/Island Wide
• Working Hours: 5.5 days (Monday to Friday 9 AM – 6 PM, Saturday 9 AM – 1 PM)
• Salary Package: Salary $1,000 per month (hourly basis) + OT
• Duration: Permanent

Key Responsibilities

• Perform a variety of tasks involving physical labor at construction sites.
• Assist in loading and unloading building materials and equipment.
• Operate hand and power tools of all types, including air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment.
• Clean and prepare construction sites by removing debris and possible hazards.
• Dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble and debris.
• Mix, pour, and spread concrete and other materials.
• Follow construction plans and instructions from supervisors or more experienced workers.
• Measure and cut materials to specified dimensions.
• Assist in the installation of structures and fixtures, such as windows, doors, and frames.
• Perform minor repairs on existing structures.

APPLY NOW!!!

• Minimum NITEC or equivalent qualification.
• Previous experience in construction or general labor is a plus.
• Has knowledge in electrical is advantageous.
• Ability to operate a variety of tools and machinery.
• Good physical condition and stamina.
• Ability to follow instructions and work independently and as part of a team.
• Knowledge of basic safety regulations and procedures.
• Willingness to work in various weather conditions and environments.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67193 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Purpose:

Ensuring that the manufacturing and engineering processes adhere to quality standards and regulations.

• To monitor and control the production process, ensuring that any defects or deviations are detected and corrected early.
• To inspect the finished product to ensure it meets all quality specifications and standards.

Key Area of Responsibilities:

• Responsible for manufacturing quality assurance including in-process quality, semi-finished product quality, and outgoing product quality.
• Lead a team of inspectors and supervisors to ensure incoming materials met internal and customer specifications and requirements.
• Drive incoming quality assurance process improvement in efficiency and effectiveness
• Owner of Non-Conformities and Error Management Systems. Collaborate with Headquarters for any system upgrade or changes
• Responsible for non-conforming materials disposition and Material Review Board (MRB)/ Corrective Action Board (CAB) and drive robust corrective and preventive actions
• Drive robust manufacturing system and process quality to meet internal and customer requirements and expectations
• Perform analysis on non-conforming quality incidents and internal errors and provide recommendations to meet internal and customer requirements and expectations
• Support Customer Quality to investigate customer product complaints
• Be responsible for manufacturing quality KPIs and reporting to senior management
• Lead a team of engineers to drive NPI and First Article quality requirements and system
• Provide leadership and consulting advice in quality matters
• Plan and lead manufacturing process audit to drive root cause analysis for outgoing inspection lapses.
• Lead, train, develop, and coach Quality team members. Manage performance evaluation and strengthen the organization.

Qualification & Experiences:

• Bachelor in Engineering (Mechanical, Electrical, Electronics, Chemical) or Material Science.
• 5 years of experience in Quality Assurance function, at least 3 years as a quality leader with supervisory experience in the manufacturing environment.
• Strong knowledge and practice in 8D, SPC, MSA, FMEA, QFD, 6-sigma methodology, PPAP, change management.
• Good understanding of First Article Inspection requirements and expectations
• Strong in statistical knowledge and 6-sigma methodology. Certified Black Belt or Green Belt preferred.
• Strategic, creative and systemic thinking
• Excellent leadership and effective communicator with all levels of associates and management.