The Architectural Supervisor duties and responsibilities are as follows:

• Invite RTO inspection for kerb, plastering and etc
• Chasing sub-con skimming work
• Check on the approved drawing for wet trades element
• Check on RC structure work prior to casting especially for kerb.
• Any other duties as assigned by the supervisor

Job Requirements:

• Minimum of 3 years of relevant experience.
• Possess relevant qualification/ trade certificate (eg. Diploma, NCCS, BCSS, Safety or Lifting)

JOB SUMMARY:

• Ensures delivery of pre-cast products or materials to site.

DUTIES AND RESPONSIBILITIES:

The Tower Crane Operator duties and responsibilities are as follows.

• Lifting of precast products or materials on sites.
• monitoring the load weights and stability of the crane.
• Responsible for basic housekeeping and maintenance of tower crane.
• Complies with all and ensures compliance of all safety, health, environmental and other company policies, procedures and requirements.
• inspecting the machinery before and after use.
• Any other duties as assigned by the Supervisor/Project Manager as and when needed.

REQUIREMENTS:

• Complete secondary school or higher education level.
• Obtain a Class 5 driving licence.
• Complete a relevant crane operator course.
• Be able to communicate with your team.

(CENTRAL REGION) - Near Paya Lebar

Highlights:

• Construction industry background is a must
• Project cost control

Job Responsibilities:

• Manage full set of accounting operations and monthly closing activities

• Liaise with external auditor on statutory audit

• Prepare audit schedules and handling queries

• Provide corporate secretary for tax filling of annual returns and tax enquiries

• Liaise with corporate secretary for preparing annual returns, resolutions etc

• Other accounting duties as require

Job Requirements:

• From Construction company
• Experience in handling cost control for project

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Senior Civil Engineer

Primary Role

Responsible for advanced Planning, designing, integrating, installation, rigging and lifting equipment, including management of contractors and vendors.

Responsible for supervising and assessing the set-up of all project components, managing all aspects of an engineering project, prepare schedules, communicate with clients and project progress.

Key Activities

1. Provide guidance and direction to civil engineering staff, ensuring their compliance with applicable regulations, standards, and codes
2. Oversee and regularly review engineering processes and resources to maximize efficiency and productivity
3. Develop plans for new engineering initiatives, including investigating new technologies and developing plans for new project implementations
4. Required to be analytical and precise, in order to explore alternative solutions and analyze feasibility of plans
5. Work independently and coordinate closely with internal and external stakeholders to implement new processes and technology, to offer innovative solutions to customers
6. Design, communicate and implement an operational plan, create and maintain cost estimates for projects and programs
7. Identify, develop, and gather the resources necessary to complete the project. This may include preparing engineering standards, designs, and work specifications
8. Developing project schedules, budget, and forecasts; and selecting materials, equipment, and external contractors
9. Liaise with other operational areas in the organization (engineering, design, drafting, technical) to secure specialize resources and contributions for the project
10. Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
11. Set priorities, allocate tasks, and to meet project targets and milestones, ensure smooth authority submission
12. Solve technical issues such as drawing discrepancies, site condition changes, verify plans, drawings and quantities for accuracy, raise RFI when necessary
13. Ensure accuracy of setting out, levelling and site surveying and all materials used and work performed are as per specifications
14. Liaising with project consultants, architect, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project
15. Support Project manager to liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws
16. Liaising with clients and their representatives (architects, engineers, and surveyors), including attending regular meetings to keep them informed of progress
17. Overseeing quality control and assist safety department to achieve health and safety target on site
18. Preparing method statement, daily weekly and monthly report
19. Ensuring all site inspection and record as per client/developer requirement
20. Ensuring all testing and quantity inspection are carried out as per contract requirement
21. Analyze and resolve engineering problems and demonstrate effective skills in oral and written communication

Requirements

Min 5 years experiences in civil, infrastructure projects

Bachelor degree in Civil Engineering, PE board recognized

· Overall responsibility is to create BIM content and extracting production documents for the purpose of delivering a BIM assisted project.

· Produce BIM model deliverables for design, documentation and fabrication purpose and ensure that BIM models are delivered with professionalism (Quality, due diligence and timeliness)

· To co-cordinate with Project Manager on site that all drawings and all work are carried out accordingly

· Certificate from BCA BIM modelling course or equivalent

· Diploma or Degree in Engineering / M&E qualification

· Proficient in Revit and Autocad software

· Minimium 1 year BIM Modelling experience in building construction and project execution

· Demonstrate ability to follow instructions and execute and adapt to new and existing process procedures and workflows

· Ability to work in a fast paced organisation

Roles & Responsibilities

Responsibilities:

• Handle full spectrum of accounting functions
• Process and ensure all invoices are accurately record in the accounting System
• Prepare and review intercompany transactions and balances
• Perform bank reconciliation
• Assist in preparation and submission of GST returns
• Coordinate with auditors, tax agents and other professionals for audit, compliance and taxation
• Provide administrative support to the accounting department, assist with filing, data entry, invoice processing, and maintaining records.

Requirements:

• Diplomain Accounting/Finance
• Minimum 3 years in local construction firm with audit experience
• Meticulous with strong organization and communication skills
• Ability to work under pressure with positive attitude and cope with tight deadlines
• Experience with accounting software MYOB is a plus

DUTIES AND RESPONSIBILITIES

The Accounts Executive duties and responsibilities are as follows:

· Handle full set of accounts for monthly closing which includes :-

• Raise invoices
• Raise journals
• Input of invoices and payment of invoices
• Preparation of suppliers’ payment
• Cash book maintenance
• Cash flow projection
• Monthly Management Reports
• GST preparation and submission
• Tax preparation and submission
• Preparation and sending out the monthly Statement of Accounts to customers

· Quarterly, half yearly and year-end financial closing.

· Preparation of Financial Statements for year-end closing

· Preparation of Audit Schedules

· XBRL preparation and submission of Financial Statements

· Assist in internal and external audit

· Assist in tax and GST queries

· Ensure compliances of Accounting standards and regulations

· Other duties as assigned by Departmental Manager.

Job Responsibilities

• To carry out supervisory roles in day-to-day site activities including taking care of workers and coordinating with client’s supervisory staff to manage inspections, etc.
• Ensure that all construction & M&E work is carried out or constructed according to the approved plans and design.
• Ensure all works are carried out within time schedule, follow the safety protocols, and maintain the required quality.
• Coordinate with fellow colleagues from different departments to ensure the smooth transition of M&E works and eliminate abortive works through regular discussions.
• Ensure proper preparation of work areas for subcontractors to carry out their works and ensure adequate materials preparation for execution.
• Monitor performance of subcontractors, evaluate the progress and manpower to ensure adequacy and adherence to schedule.
• Keep daily site records of manpower, materials usage, and works status.
• Attends all necessary M&E work progress meetings, internal meetings as & when required.
• Embraces safety and ensures all practices comply with safety regulations.

Job Requirement

• Possess relevant core trade certification, BCSS, CSOC, etc highly preferred.
• Minimum 3 years of M&E Supervisory experience.
• Good verbal and written communication skill.
• 6 days work week.
• Location: Lentor Central

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• Visit project sites, arrange and conduct QAQC inspections on mainly Structural Works and Architectural Works.
• Assist project teams in the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practice.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree in relevant discipline.
• Minimum 5 years of experience in procurement preferably construction/ civil engineering industry.
• Must be familiar with safety procedure within the site.
• Candidate with PPVC (Prefabricated Prefinished Volumetric Construction) experience advantage.
• Working Location: Lentor

Job Descriptions:

• Assist the Project Engineer and Project Manager in project planning and to co-ordinate and oversee all works on the site.
• Monitor & co-ordinate the works with supervisors.
• Handling of technical and engineering problems.
• Assist in planning, programming and monitoring of construction works progress.
• Liaison with client's representative, relevant authorities and consultants.
• Identify and assess any foreseeable risk arising from the workplace or work processes, minimise environmental impact associated with the construction activities.
• Take reasonable practical measures to eliminate any foreseeable risk to any person who is at the workplace.
• Ensure safe work procedures and environmental control measures are implemented at the work site.

Job Requirements:

• Degree in Civil / Structural Engineering or its equivalent.
• Preferably Degree be recognized by Board of Engineers.
• Minimum 3 yrs experience in Residential Construction Industry.

Responsibilities:

• Ensure adequate supplies of beverages/refreshments at pantry areas and meeting rooms.
• To clean and maintain pantry areas, meeting rooms and director's office cleanliness
• Assist in preparation and cleaning for company events
• Any other duties as assigned by Supervisor

Job Description

• Development of deep excavations monitoring and dynamic construction control software.
• Development of Land Reclamation Digital software.
• Applicate of automated construction techniques for deep excavations, such as automated monitoring, steel reinforcement actuators, and automated injection system.
• Research on refined modeling and dynamic construction control technology of NATM tunnels.
• Developed the new equipment of vibro-replacement stone column and automated construction technology, which can penetrate 15m gravel layer.
• Research on constitutive models of geotechnical materials and finite element models in soft soil.
• Plan a scheme corporate private Generative Pre-trained Transformer.

Requirements

• Min Master’s degree in Architecture Civil Engineering or equivalent
• Must possess min 7 years of relevant working experience in the construction industry of which minimum 5 years are in MRT projects
• Must possess all the training certificates required of a Construction Manager

• Provides technical and engineering leadership, and supports the development of new technologies within a local laboratory and potentially across the Element enterprise
• Provides counsel to coworkers and customers requiring critical analysis of data
• Is able to exchange technical information and knowledge with peers, senior colleagues and specialists across the element enterprise
• Actively seeks ways to disseminate critical testing knowledge, acumen and protocols throughout Element
• Is accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Is able to oversee and guide problem solving of complicated technical challenges
• Provides input and support on business development opportunities with new or existing customers
• Confident making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assists in the professional development of novice technicians and engineers within the local laboratory
• Carries out crucial examination and implementation of testing concepts and data
• Utilizes an assortment of skill, methods, procedures and materials in advanced testing analysis
• Adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job description

About us:

Hebei Jinbiao is the current leading specialist for Noise Control Products in ASIA. We are a leading service provider to the construction industry since 2016 and has taken #1 position for noise barrier in Singapore in the recent few years.

Our noise barrier products are widely using in LTA, HDB, URA, PUB & various private construction projects.

Role & Responsibility:

· Ensures project completes safely, on time and within allocated site resources.

· Ensures all worksites operate within the company’s prescribed safety management system.

· Identifies and implements opportunities to save money through reducing wasteful practices or increasing workmen’s productivity.

· Checks and records work site progress.

· Prepares, implements, and tracks fortnightly schedule for projects.

· Reviews and approves workforce deployment scheduled by Site Coordinator.

· Reviews and approves machinery orders made by Site Coordinator.

· Liaise with client’s representatives viz Project Team on the following:

a. Weekly coordination/progress meeting

b. Monthly WSH coordination meeting

c. Site walks

d. Etc

Manager has full control in the operation of the project sites. Site Manager is assisted by:

· WSHO in the aspect of WSH Management.

· Site Coordinator in the aspect of daily worksite operation.

· Project Coordinator in the aspect of project documentation.

About Us:

Hebei Jinbiao is the current leading specialist for Noise Control Products in ASIA. We are a leading service provider to the construction industry since 2016 and has taken #1 position for noise barrier in Singapore in the recent few years.

Our noise barrier products are widely using in LTA, HDB, URA, PUB & various private construction projects.

Role & Responsibility:

- An Appointed Person for Lifting Operations is responsible for planning, overseeing, and ensuring the safe execution of lifting operations.

- Prepares Lifting Plan supported by a Risk Assessment (RA).

- Prepares Safe Work Procedure or Method Statement.

Experience:

1. Experience of working with lifting equipment, especially mobile cranes and lorry cranes is required.

2. Attended and completed a course on Appointed Person for Lifting Operation Course.

Working Hours:

8am to 5pm on Mondays to Fridays

8am to 12pm on Saturdays

* Overall responsible for all operations components of the department to ensure efficiency and effectiveness of operations

* Responsible for the development and implementation of Company annual business plan and short term strategies, as well as establishing key performance objectives to ensure that meet business targets and drives sustainable, profitable growth

* Make well-informed decisions that would lead to growth opportunities & success for the business. Acting decisively & making prompt decisions would help you evaluate the company’s aim & provide solutions to potential problems.

* Ensure that operational standards are met in regard to Construction requirements, safety regulations, operation licences and loss prevention

* Maintain and develop high standards of operations in restaurant by ensuring all SOPs are relevant, up to date, trained effectively and operationally delivered.

* Make well-informed decisions that would lead to growth opportunities & success for the business. Acting decisively & making prompt decisions would help you evaluate the company’s aim & provide solutions to potential problems.

Job Requirements:

· Minimum 8 years’ related experience in Construction Trade

· Strong leadership skills, Management skills & Planning capability

· Able to work under pressure & fast pace environment

· Excellent communication & interpersonal abilities

Job Description:

• Operate crawler crane in construction sites.
• Lifting of precast products or materials on sites.
• Responsible for basic housekeeping and maintenance of crawler crane.
• Complies with all and ensures compliance of all safety, health, environmental and other company policies, procedures and requirements.
• Inspect the crane regularly to ensure safety.
• Perform routine maintanance.
• Other duties as assigned by the Departmental Manager.

Responsibilities:

• Provide chauffeuring support
• Ensure the vehicles are well maintained
• Ensure the vehicles are meeting all safety requirements
• Cleaning of vehicles on a regular basis to ensure the cleaniness at all times
• Drive and operate the assigned vehicle in a safe and courteous manner
• Follow and comply with all the road traffic rules at all times.
• Carry out other ad-hoc assignments as required

Requirements:

• Possess a valid class 3 driving license with clean record
• Minimum 2 years’ experience with driving a minivan. (E.g. Toyota Vellfire)
• Familiar with road traffic rules, roads in Singapore
• Reliable and punctual
• Possess good working attitude

Admin Assistant (Construction)

• Working day: 5.5day (Mon-Fri 9am-6pm ; Sat 9am-1pm)
• Working location: Tuas South Avenue (Tuas – Transport Provide from Tuas Link MRT)
• Salary: $2,400 - $2,600 (Experience can ask higher, up to $3k)

Requirement:

• At least relevant working experience in Construction Industry

Responsibility:

• Answer and direct phone calls
• Organize and schedule appointments
• Plan meetings and take detailed minutes
• Write and distribute email, correspondence memos, letters, faxes and forms
• Assist in the preparation of regularly scheduled reports
• Develop and maintain a filing system
• Update and mainta
• in office policies and procedures
• Order office supplie
• Maintain contact lists
• Book travel arrangements
• Submit and reconcile expense reports
• Provide general support to visitors
• Act as the point of contact for internal and external clients
• Liaise with executive and senior administrative assistants to handle requests and queries from senior managers

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Working day: 5.5day (Mon-Fri 9am-6pm ; Sat 9am-1pm)
• Working location: Tuas South Avenue (Tuas – Transport Provide from Tuas Link MRT)
• Salary: $2,400 - $2,700

Requirement:

• At least relevant working experience in Construction Industry

Responsibility:

• Answer and direct phone calls
• Organize and schedule appointments
• Plan meetings and take detailed minutes
• Write and distribute email, correspondence memos, letters, faxes and forms
• Assist in the preparation of regularly scheduled reports
• Develop and maintain a filing system
• Update and mainta
• in office policies and procedures
• Order office supplie
• Maintain contact lists
• Book travel arrangements
• Submit and reconcile expense reports
• Provide general support to visitors
• Act as the point of contact for internal and external clients
• Liaise with executive and senior administrative assistants to handle requests and queries from senior managers

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee (Ashley) Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Responsibilities:

• Oversee and manage the prefabrication factory/yard, reporting to the Project Director, with a focus on the production of MEP (Mechanical, Electrical, Plumbing) modules and manpower planning.
• Ensure MEP design and construction processes align with the latest technologies such as Building Information Modeling (BIM) and automation techniques.
• Implement BIM and Integrated Digital Delivery (IDD) methods to enhance communication and collaboration between the design and production teams.
• Stay up-to-date with the latest industry trends in MEP, modular construction, and sustainability practices, ensuring all processes meet Building and Construction Authority (BCA) regulations and other industry standards.
• Collaborate with architects, engineers, and contractors to ensure the seamless integration of MEP systems into building designs.
• Develop and implement quality control measures, ensuring all systems are tested, commissioned, and certified in compliance with safety and environmental regulations.
• Utilize data analytics to monitor MEP system performance, identifying areas for improvement and optimizing production.
• Apply Lean Management principles to improve productivity, streamline processes, and reduce waste in the factory.
• Build and maintain relationships with suppliers, contractors, and stakeholders to support innovation and continuous improvement.
• Ensure the prefabrication factory operates efficiently, delivering projects on time and within budget.

Requirements:

• Minimum 4 years of experience in the construction industry, specifically in managing prefabrication or MEP/M&E-related operations.
• Experience working with Main Contractors or M&E Subcontractors.
• Proficiency in BIM, automation, and modular construction technologies.
• Strong knowledge of safety, environmental, and industry standards (BCA compliance).
• Ability to lead and train teams, fostering a culture of innovation and continuous improvement.

Interested candidates please apply online or send your latest CV to [email protected]

AlwaysHired Pte Ltd

Reg No: R1549345

EA: 24C2293

Job Description

Ø Perform regular quality assessments on all incoming materials from suppliers

Ø Ensure all finished products to be exported meet the specifications required and complies with industry standards

Ø Resolve quality-related issues in a timely manner

Ø Identify areas for process improvement and efficiency in quality control procedures

Ø Maintain inventory update of stocks and materials

Ø Document inspection outcomes by ensuring all completed detailed reports submitted to management are accurate

Ø Ensure the team completes the assigned daily work schedule and production target is achieved

Ø Import & export logistics arrangement, and third party logistics for local delivery.

Ø Any other ad-hoc matters assigned by hiring manager and management if needed.

Qualifications & Key Traits:

• Polytechnic Diploma

• Min 2 years experience in quality assurance management within the manufacturing industry

• In-depth knowledge of quality management systems, standards, and methodologies

• Strong leadership and team management skills

• Effective communication skills in English, both verbal and written

• Experience with regulatory/ safety compliance and quality audits

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

Alternatively, you may send your application and resume in MS Words format to [email protected] or Whatsapp to 8767 9648

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

K N Tan
Registration Number: R1768143
EA Licence No: 17C8778 (JIH SUN EMPLOYMENT AGENCY)

R:8TEH1TP13

A warranty lead is a hands-on person, who should have done post go-live support before, managing the defect fixing by a dedicated dev team, test team and analyst, focusing on defect triage, ability to communicate with the 3PP. This was a complex SI delivery, we need someone who can both technically manage the teams, and also with strong client-facing skills, able to produce clear reports and status updates, with the ability to explain complex technical issues to non-technical stakeholders. Leads a team of quality engineers through multi-disciplinary team planning and ecosystem integration to accelerate delivery and drive quality for Post Go-Live Support.

Requirements:

• Technical understanding of production support of a CRM project with Salesforce and CloudSense, integration layer, order management and billing.
• ITIL and IT Service Management background
• Defect triaging and issue management
• Experience with reporting the production status, SLA and KPIs in a telco project.
• Should be able to manage the prioritization and planning of a team of support developers and testers.

About our client: Our client is in the Pharmaceutical industry.

Responsibilities:

• Lead quality management initiatives, focusing on quality assurance and control processes.
• Collaborate with cross-functional teams to establish and refine quality requirements.
• Evaluate existing quality processes and recommend improvements to enhance efficiency.
• Develop and implement training programs for staff on quality management practices.
• Serve as the main point of contact for quality-related inquiries and issues.
• Ensure that all quality documentation meets regulatory standards and is fully compliant.
• Oversee and guide validation projects, ensuring data accuracy and reliability.
• Work with Subject Matter Experts to perform gap analyses and assess risks.
• Contribute to the resolution of validation issues and support corrective action plans.
• Evaluate and approve validation documentation, including reports and protocols.
• Provide assistance with validation inquiries and offer solutions to challenges.
• Review and endorse standard operating procedures and manufacturing documentation.

About you:

• Bachelor’s degree in Quality Management, Life Sciences, or a related field.
• Minimum of 5 years of experience in quality assurance and control, preferably in the pharmaceutical or manufacturing sectors.
• Strong understanding of quality management systems (QMS) and regulatory standards (e.g., FDA, EMA).
• Familiarity with JDE quality modules is advantageous.
• Experience in system migrations or implementations is a plus.
• Excellent analytical and organizational skills with a keen attention to detail.
• Strong communication skills to effectively engage with diverse teams.

Other:

• Work location: North
• Work hours: 40 hours (Mon-Fri, 8am-5pm)
• Contract duration: 15 months

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As a Quality System Intern, you are to be responsible for the site's document control and records management for compliance to ISO 13485, MDSAP, EU MDR and, Alcon Standards and Policies in our Tuas Site. In this role, a typical day will include:

· Perform archival of electronic documents, based on retention period requirements.

· Identify improvement opportunities and lead/support the implementation activities to improve performance and efficiency

· Ensure no backlog of record archives for electronic documents

· Assist in the migration of new quality system Box (from Alfresco)

· Meet quality objectives set by management & comply to Alcon, QMS and Safety requirements

· Work with cross-functional teams to resolve operational quality issues

· Performs any other duties as assigned by Supervisor according to business needs

· Adhere to Alcon standards, in particular quality, ethical, health, safety and environment (HSE) and information security (ISEC) standards

· Complete project above as per stipulated timeline

What You'll Bring To Alcon

· Undergraduates Diploma/Degree in Engineering

Why Join Us:
• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.