Job Description

• REs shall provide standing supervision of all civil and structural works to ensure compliance with the following authorities' requirements:
• The inspection of the bus depot involves the demolition and removal of the existing Pasir Panjang Distripark. Following this, the construction will take place for main depot building, dormitory and administration office.
• Knowledge of construction methods, materials, and safety protocols
• Supervise and monitoring of contractors’ work to ensure they are carried out in accordance with the provision in the contract document.
• To monitor the progress and assist SRE/QP on structural inspection on all Structural works according to the approved drawings issued.
• To review and supervise safety, environmental and health matters.
• Review and comment on contractor's submissions.

Job Requirements

• The RE shall have minimum three (4) years of experience as a civil engineer; and have least two (2) years shall be in supervision of works similar in nature to the Works in the Civil Contract.
• All RE shall have a diploma in the civil discipline or equivalent and be accredited by JAC of IES/ACES as QSS.

Work During Office hour

Monday to Friday: 8:30 a.m. to 5:30 p.m.

Saturday: 8:30 a.m. to 12:30 p.m. (Willing to work on rotation shifts)

Sunday and Public Holiday: 00:00 hours onwards or otherwise advised by project officer depending on LTA’s contractor work schedule.

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours (Monday - Friday)

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• Provide support in both AP & AR functions
• Prepare sales invoices and reports
• Prepare outgoing payments through internet banking and manual check payments
• Data entry and filing of accounting documents
• Assist in sales admin support
• Assist in daily administrative works
• Any ad-hoc duties as assigned

Requirements:

• Diploma in Accounting or equivalent
• 3-5 years of relevant work experience preferred
• Proficient in MS Office
• Organized and Meticulous
• Possess good communication and co-ordination skills
• Team player with positive working attitude
• Candidate with relevant experience will be considered for senior position

We are looking for a capable production manager to join our growing team. The primary duties of this role include production planning, resource allocation and safety compliance. If you have excellent communication, leadership and time management skills, this may be the job for you. Please note candidates require at least four years of experience in the manufacturing industry.

Job Description

• RTOs shall provide standing supervision of all civil and structural works to ensure compliance with the following authorities' requirements:
• The inspection of the bus depot involves the demolition and removal of the existing Pasir Panjang Distripark. Following this, the construction will take place for main depot building, dormitory and administration office.
• Supervise and monitoring of contractors’ work to ensure they are carried out in accordance with the provision in the contract document.
• To monitor the progress and assist Resident Engineer on structural inspection on all Structural works according to the approved drawings issued.
• Reject poor quality of works at site and inform RE to raise non-conformance notice.
• To ensure all building works are carried out in accordance to the design and specifications as specified in the terms of contract.
• Liaise with contractors in the coordination of site work
• Ensure contractors maintain work safety and housekeeping of the site.
• Checking of all drawings, specifications and schedule of works at site.
• Monitor and report progress of the works on site
• Undertake any other duties related to the project assigned.

Job Requirements

• The RTO shall have minimum three (3) years of relevant experience in projects similar in nature to the Works in the Civil Contract.
• All RTO shall have a diploma in the civil discipline or equivalent and be accredited by JAC of IES/ACES as QSS.
• RTOs should also have experience in supervision of installation of monitoring instruments, collation of monitoring data and use of software for presentation of monitoring data for analysis and interpretation.

Work During Office hour

Monday to Friday: 8:30 a.m. to 5:30 p.m.

Saturday: 8:30 a.m. to 12:30 p.m. (Willing to work on rotation shifts)

Sunday and Public Holiday: 00:00 hours onwards or otherwise advised by project officer depending on LTA’s contractor work schedule.

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Quality Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Job Responsibilities

• Responsible for the creating and executing methods and procedures for the inspection, testing, and evaluation of the products and production equipment.
• Responsible for the designing and evaluating processes, mechanisms, and equipment used in inspection and testing.
• Responsible for quality assurance tests and statistical analyses to assess control levels and manage risks related to product quality
• Responsible for root cause analyses of incidents that necessitate corrective actions.
• Ensuring that corrective measures and deviations meet with the standards
• Ensuring that documentation is compliance with the Experienced Professional

Requirements

• Min Diploma in engineering or equivalent
• Min 3 years’ relevant working experience in Quality Management
• Certified in API Q1, Q2, ISO and other relevant auditor would be advantages.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Key Responsibilities

• Identify, develop & follow-up on new sales leads for corporate training products and consultancy services.
• Responsible for end-to-end account business planning including research, documentation, account planning and internal coordination to ensure that each account has a clear and actionable plan that best meets the client’s needs.
• Maintain and grow revenue streams by developing and maintaining relationship with clients to ensure maximum revenues generation over the long term.
• Manage delivery of consultancy and training projects including client expectation and satisfaction. Ensures that clients receive products and services to agreed standards of quality and on time by effectively managing and monitoring those who deliver the work and taking corrective action including escalation when necessary to guarantee client satisfaction and sustainable financial results.

Key Requirements

• Bachelor degree in Business Administration, Business Management, Sales & Marketing or closely related field, preferably with past experience in either Human Resource, Quality Management or Organisational Development related work or equivalent experience.
• Prior sales and business development experience in the professional services sector within APAC will be an added advantage. Track record of meeting and exceeding revenue targets.
• Excellent presentation and communication skills and confident in using technology tools to build relationships and engage with clients and prospects.
• A social media presence with a strong follower base will be an added advantage.

RESPONSIBILITIES

• The role involves planning, coordinating, and implementing standards development projects under the national standardization programme administered by Enterprise Singapore.
• Provide secretariat support to the Technical Committees and Working Groups. This includes preparation of agendas, meeting minutes, report compilation, drafting of standards, etc.
• Engage and coordinate with the industry, academia, and government organizations to facilitate the development, promotion, and review of Singapore Standards and Technical References.
• Organizing key standard launches events and other outreach events.
• Collaborate with key stakeholders to identify, develop, and launch new standards. This includes conducting consultations and ensuring that standards are aligned with industry needs.
• Assist in the industry and technical research for the development of new/review of standards. Conduct verification studies to identify users of the standards.
• Handle inquiries regarding standards in your area of responsibility, ensuring prompt and accurate responses to stakeholders.

Requirements

• Minimum Diploma qualification in quality and safety / Fresh graduate are welcome to apply
• Preferably with at least three (3) years of relevant work experience in safety or manufacturing related field
• Preferably with secretariat experience
• Min. 3 years of experience in quality, safety or manufacturing industry is advantageous
• Results-oriented and able to manage and execute projects in a team and independently.
• Possess good interpersonal skills and work well with various stakeholders
• Good writing and communication skills.
• Proficiency in Microsoft Word, Excel, PowerPoint, and other productivity tools

• Purchasing Executive
• 5.5 days
• Mon-Fri: 9am-530pm || Sat: 9am-12pm
• $2800-$3800
• Pioneer Rd (Transport Provided from Joo Koon MRT)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Scope:

• To perform company requisitions and purchases in accordance to policies & procedures
• Liase with supplier on price negotiation, delivery, quality, discrepancies, etc
• Compare and evaluate offers from suppliers
• Issuance of Purchase Order
• Explore new suppliers with better quality, price, service and commercial terms
• Updating of approved supplier/vendor list in the server
• Assist in preparing cost budget
• Preparing cost report
• Other related duties as assigned by superior

Job Requirement:

• Experience in purchasing/QS
• Minimum Diploma level or equivalent with at least 1-2 years of relevant working experiences
• Hands-on experience with purchasing software

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

• Collect greasy waste from customers’ grease traps utilizing vacuum suction tanker
• Deliver greasy waste to PUB treatment Plant for legal disposal (for Class 4 drivers)
• Ensure cleanliness of grease trap and proper housekeeping of area around grease trap
• Provide customer with excellent, prompt, and courteous service
• Assume full responsibility of company vehicles and equipment on a daily basis
• Complete all necessary administrative paperwork on time and in a good manner
• Work together with fellow workers to ensure all jobs are completed properly
• Physically fit to lift heavy loads
• Act as an ambassador for Bio-Care Grease Control Pte Ltd to promote our services
• Includes all other duties assigned as and when needed to maintain customer sewer systems
• Possess Class 3/4 driving licence with clean driving record

Food Processing Technician (with Logistics Support) is responsible for combining food processing responsibilities with occasional support for our logistics operations, ensuring the seamless flow of our high-quality food products from production to customer.

Production:

• Follow established production procedures and safety guidelines.
• Operate and maintain food processing equipment.
• Inspect and weigh ingredients to ensure accuracy.
• Package and label finished products according to company standards.
• Maintain a clean and sanitized work environment.

Logistics Support (Occasional):

• Deliver products to customers' locations in a timely and courteous manner.
• Load and unload food products from the company vehicle.
• Collect payment for deliveries and reconcile cash with invoices.
• Inspect and maintain the company vehicle to ensure safe and reliable operation.
• Adhere to all traffic laws and regulations while driving.

Any other ad-hoc tasks as assigned.

Qualifications

• Prior experience in a food processing environment is preferred.
• Able to converse in basic English and/ or Chinese language
• Valid Class 3 or 4 driver's license with a clean driving record.
• Ability to lift and carry moderate weights and work in a fast-paced environment.
• Strong attention to detail and ability to follow instructions.
• Ability to work independently and as part of a team.

6 days work week

Mondays to Saturdays

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Construction Worker/General Worker
• Working Location: Sembawang/Island Wide
• Working Hours: 5.5 days (Monday to Friday 9 AM – 6 PM, Saturday 9 AM – 1 PM)
• Salary Package: Salary $1,000 per month (hourly basis) + OT
• Duration: Permanent

Key Responsibilities

• Perform a variety of tasks involving physical labor at construction sites.
• Assist in loading and unloading building materials and equipment.
• Operate hand and power tools of all types, including air hammers, earth tampers, cement mixers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment.
• Clean and prepare construction sites by removing debris and possible hazards.
• Dig trenches, set braces to support the sides of excavations, erect scaffolding, and clean up rubble and debris.
• Mix, pour, and spread concrete and other materials.
• Follow construction plans and instructions from supervisors or more experienced workers.
• Measure and cut materials to specified dimensions.
• Assist in the installation of structures and fixtures, such as windows, doors, and frames.
• Perform minor repairs on existing structures.

APPLY NOW!!!

• Minimum NITEC or equivalent qualification.
• Previous experience in construction or general labor is a plus.
• Has knowledge in electrical is advantageous.
• Ability to operate a variety of tools and machinery.
• Good physical condition and stamina.
• Ability to follow instructions and work independently and as part of a team.
• Knowledge of basic safety regulations and procedures.
• Willingness to work in various weather conditions and environments.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67193 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description & Requirements

• Perform Hands On pest control work on customer's sites.

• Attend to Clients' complaints on pest issues and understand the potential causes of pests' activities

• Conduct on-site routine reviews to Client's premises to check on the quality of the technical team and ensure Company's SOP and Protocol are followed thru' by technicians.

• Prepare ad-hoc / monthly formal reports to clients with recommendations for remedial actions for enhanced protection of their premises.

• Attend meetings with technical team as well as NEA inspectors on site.

• Do presentations during meetings in front of customers/NEA officers to review pest issues

• Implement on work plan, Risk Assessment, Safe Work Procedures, hygiene standards to ensure compliance with Workplace Safety & Health Environment.

• Maintain mandatory records and other documentations for Bizsafe Level 3 Certification.\

Requirements

• Strong knowledge on General pests & safety regulations will be an added advantage.

• Proficient in MS Office.

• Ability to lead

• Good command of English

• Minimum 4 years experience in the relevant field.

• NEA Pest Management Licence preferred

• Must have Class 3 driving licence

• 6 days a week, up to 12 hours per day.

• Must be prepared to be on standby duty 24/7 including weekends and public holidays

Upon activation, must reach customer's site within 1-2hours depending on urgency

• In line with the business strategies set by the Managing Director, develop NR business to ensure revenue and profitability with a long-term successful performance.
• Work with managers to develop a long-term strategic plan to include objectives for each business unit focusing on revenue growth, higher profitability, business development with focused marketing and sales plan, constant upgrade on technical facilities and equipment with technology, human resources, and team development.

Specific responsibilities:

• Achieve budget objectives in terms of revenue, operating profit margin, operating expenditure and optimal equipment utilization for all business units.
• Translate business strategy into pragmatic action plans and execute them cohesively.
• Monitor the market for the development of new technologies and trends.
• Negotiate and secure contracts for local and international clients.
• Promote the image, capability and integrity of the company to the clients.
• Take prompt responsive actions to complaints and appeals.
• Manage pre and post contract commercial issues.
• Ensure the best quality of execution with the effective use of resources.
• Ensure personnel competence requirements are met and continually enhanced.
• Identify, promote and groom future business leaders.
• Lead, coach and develop a business-oriented, high preformance team.
• Ensure adequate and appropriate safety arrangements are made to safeguard employees and meet the legislated requirements.
• Ensure the implementation of SGS Group policies and procedures across all levels within the Business Units.
• Applies judgment and acts according to SGS standards of ethics and integrity.
• Other duties and responsibilities as assigned

Requirements:

• Degree in business management or engineering or related field.
• At least 10 years of operational and management experience in a related field.
• Able to coordinate and motivate a team towards a common goal.
• Able to realize business opportunities in conformity to the business strategy.
• Technical knowledge and experience in related field and in using management methods and tools.
• Able to work independently and to coordinate several activities simultaneously.
• Business and profit minded with related technical knowhow.
• Competitive and profit-driven; re-invents competitive advantage.
• Able to interact with all levels of management, suppliers and clients.
• Good communication, negotiation and interpersonal skills.
• Acts quickly and decisively; able to make tough calls.
• Works well under pressure, challenges status quo.
• Drive and lead with strong people management ability across diversified culture.

5 Day Work Week - Ubi Area ( Next to Ubi MRT ) - Enviromental / Built Enviroment Industry

Basic Administrative Tasks for Project Coordination

• Organising and filing of documents
• Create and update records in database ( Updating new projects / contracts or alteration of current contracts )
• Job scheduling and monitoring
• Coordination between office and outdoor technicians
• Support new projects - communciate and update status of work with customers
• Assist in submitting work documentation to customers as and when required
• Application of Permit To Work / Check on status of said permit
• Proficient in Microsoft Office (Word and Excel). Able to craft and reply emails.

Customer and Client Relations

• Handle inquiries and maintain good communication with clients and stakeholders.
• Assist with scheduling and tracking service deadlines and liaising with customer and outfield technicians to meet service requirements.
• Coordinate with outfield technicians and other office staff to support customer's administrative needs.
• Assist in the organization and management of contract / related documents.

Job Title: Software Quality Engineer - Senior Consultant

Salary: $9,800.00

Responsibilities:

• Lead large-scale and complex testing efforts, ensuring that software products meet the highest quality standards.
• Own the test strategy, test execution, and test automation for critical software projects.
• Drive the adoption of best practices for testing and automation across the organization.
• Lead and mentor a team of testers, fostering collaboration and ensuring knowledge sharing.
• Provide expertise in areas such as application performance and security testing.
• Take ownership of the test automation framework and continuously improve it based on feedback and emerging trends.

Experience and Skills Needed:

• More than 6 years of experience in software testing, including a deep focus on exploratory testing and automation.
• Strong leadership skills and the ability to drive test strategies and innovations across teams.
• Advanced knowledge of Agile testing practices and tools.
• Extensive experience with a variety of testing tools and frameworks, including those mentioned above.
• Ability to drive continuous improvement initiatives in testing processes and tools.

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Responsibilities:

• Test Strategy Development:Assist Product Owner and Business Analyst in crafting user story acceptance criteria.
  Analyze and decompose complex software systems, designing a comprehensive test strategy.
  Research emerging technologies to develop innovative test automation frameworks.
  
• Test Execution & Automation:Develop test suites, scenarios, and cases to ensure robust quality assurance.
  Take a risk-based approach to test automation, ensuring optimal coverage.
  Conduct time-boxed exploratory testing to identify potential issues.
  Maintain regression test suites in the nightly QA build and continuously refine the smoke test suite in the Development CI environment.
  
• Collaboration & Testing Leadership:Lead system integration testing in collaboration with other system owners.
  Manage user acceptance testing (UAT), ensuring all testing requirements are met.
  Oversee the defect lifecycle and manage test artifacts and repositories.
  
• Continuous Improvement:Drive continuous improvement in agile testing practices and tools.
  Take on secondary roles such as Application Performance Engineer or Application Security Engineer, as needed.
  

Experience and Skills Needed:

• Minimum of 3 years of experience in exploratory testing and regression test automation.
• Strong analytical skills with a focus on detail.
• Excellent interpersonal skills, including tactfulness and effective communication.
• Experience working in an Agile development environment is an advantage.
• Familiarity with test automation tools such as Robot Framework, SikuliX, Selenium, Playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC, and Sprinter), or EggPlant is a plus.
• Certifications such as Certified Software Testing Professional (CSTP) or Certified Software Quality Analyst (CSQA) are highly beneficial.
• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology, or related disciplines.

Responsibilities

a) Manage asphalt premix production quality control processes;
b) Conduct regular inspections and testing;
c) Analyse test results and implement corrective actions;
d) Maintain quality control records and documentation;
e) Train production staff on quality control procedures;
f) Collaborate with production and laboratory teams;
g) Develop and implement quality improvement initiatives;
h) Under the WSH Act, employees have a duty to keep their workplace and colleagues safe:
• Cooperate with employers and follow safety and health procedure;
• Report unsafe acts and incidents;
• Do not tamper with safety devices or perform wilful or reckless acts; and

i) Be responsible for any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirement

• Diploma / Certificate in Asphalt Technology or related fields
• Preferably with relevant experiences
• Well knowledge in quality control procedures and standards (ASTM, AASHTO, BS)
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to interpret test results and make informed decisions
• Familiarity with quality management systems (ISO 9001)
• Proficient in Microsoft Office and laboratory software

We are looking for a Quality Control Assistant to support the Quality Assurance Executive in maintaining the highest standard of product quality and safety.

Job Description:

• Responsible for FSMS (GMP, HACCP, ISO 22000, HALAL) monitoring
• Consistent monitoring of quality and specification of product during processing
• Perform inspection for incoming material and outgoing finished product
• Recording and maintaining data for QC information
• Collect samples for product testing
• Report to the department lead on nonconforming products or processes detected

Requirement:

• Physically fit to work in cold room environments with the ability to stand and walk for extended periods.
• WSQ Food Safety Course Level 1 and/or Level 3 certification preferred, familiarity with food/seafood handling and processing is a plus.
• Meticulous with strong organizational and communication skills.
• Strong communication, organizational skills, and ability to walk and stand in a fast-paced cold working environment.
• Proficient in English and Mandarin to interact with Mandarin/English-speaking stakeholders.
• Willing to take up ad-hoc duties assigned by the company.
• Knowledge of SAP will be advantageous.

Job Highlights

• Job Types: Permanent/Contract
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, alternate Sat
• Great learning development opportunities.
• Work-life balance and positive/friendly working environment.

Responsibilities

• To carry out various pest maintenance and rodents eradication works at Animal holding facilities, exhibits, habitats, aviaries and its surrounding areas
• To carry out potentially strenuous jobs, able to work diligently with minimal supervision, meticulous
• To Understand conditioning method and positive-reinforcement training.

Requirements

• Vector Control Operator, Vector Control Technician (VCT) and Vector Control Worker (VCW) licensed/certified.
• 2 years working experience in pest control, physically fit and healthy to work outdoors and carry out potentially strenuous jobs, able to work diligently with minimal supervision
• Creativity for the design of mechanical traps.
• Enthusiasm and willingness to free aviaries of rats.

Require experience with Quick Book and Xero system is an advantage. Able to work independently. Office skills and good communication is essential

• Analyze blueprints, sketches, or verbal directions to determine the required quantity, dimensions, placement, and configuration of reinforcing rods.
• Examine blueprints or project specifications to fully understand the scope and requirements.
• Arrange and securely fasten reinforcing rods within forms following blueprint specifications, utilizing wire and pliers.
• Set up fencing or protective barriers as necessary.
• Precisely position structural elements in their designated locations.
• Secure steel bars, rods, cables, or mesh within concrete forms using appropriate tools, such as fasteners, rod-bending machines, blowtorches, or hand tools.
• Accurately install metal structural components.
• Cut reinforcing rods to the specified lengths using metal shears, hacksaws, bar cutters, or acetylene torches.
• Prepare metal components by cutting them to match required specifications.
• Place blocks beneath rebar to elevate it above the deck, ensuring proper floor reinforcement.
• Install safety and support equipment as needed to maintain structural integrity.

Join a dynamic team at the forefront of underground services. As a leader in pipe jacking projects, we are dedicated to delivering innovative and reliable solutions. We are seeking talented professionals to fill the following key positions:

Tunnel Manager

Responsibilities:

• Manage tunneling operations, focusing on safety, efficiency, and quality.
• Lead and mentor tunneling teams, ensuring adherence to project specifications.
• Conduct site inspections and oversee equipment maintenance.
• Troubleshoot and resolve issues arising during tunneling operations.

Requirements:

• Bachelor’s degree in Civil Engineering or related field.
• 7+ years of experience in tunneling, with expertise in pipe jacking.
• Proven leadership in managing large-scale tunneling teams.
• Comprehensive understanding of tunneling equipment and methodologies.

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)