ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

Job Scope

· Process payroll transaction, calculate staff & general worker’s overtime, and CPF submission.

· Maintain employee annual leave database and process petty cash.

· Prepare employment contracts, KETS (for staff), letters of appointment, and confirmation/ termination letter.

· Prepare job description, post job ads and source for suitable candidates.

· Proper filling for all the invoices and payment vouchers.

· Submission of year-end IR8A and IR21.

· Updating MOM Labour Survey and Occupational Employment Dataset (OED).

· Assist in ISO & GGBS Renewal & Surveillance Audit, BCA registration renewal, GeBiz renewal and BizSafe Renewal.

· Submission of application/ renewal for the Contractor Registration and Builder License under eBACS.

· Compile the relevant business documentation used in banking process.

· Maintain accurate financial records and statements.

· Record transactions and events relating to sales, purchases, receivables, payables and cash.

· Issuing and process payment vouchers

· Preparation and monitor weekly/ daily cash flow.

· Coordinate and liaise with insurance for Performance Bond / Advance Payment Bond matters.

· Coordinate and liaise with insurance agent for Foreign Workers Hospitalisation Insurance renewal, WICA renewal and Machinery Insurance.

· Coordinate with valuer for the machinery valuation matter.

· Perform ad-hoc duties as assigned.

Requirement

*Education: A certificate, diploma, or higher qualification in accounting, administration, or a related field

*Skills: Proficiency in Microsoft Office and the internet, and the ability to use accounting software like MYOB

*Experience: At least two years of relevant work experience

*Language: Proficiency in writing and speaking English

*Other skills: Ability to multitask

Roles & Responsibilities:

• Prepares, develops, finalises, effects, modifies and monitors the long term, short term, annual and periodic budgets and plans for the organisation. Update Owners about their progress and provides logical and rational explanation for variations in their achievement.
• Controls the operations of the organisation including financial, engineering, procurement and administration by providing management support and direction to departmental heads and their respective teams. =
• Responsible to ensure the development, enforcement, maintenance and updating of suitable systems, policies and procedures within the organisation, in order for the company to carry on its activities smoothly. Coordinates, reviews and approves the preparation of policy manuals, safety standards and quality guidelines and ensures the adherence of company employees to these documents.
• Responsible to ensure the profitability of the company and return on investment for the owner/partner. Approves the pricing for tenders/projects, ensures that project expenses are well within the contract price and monitors the income and expenditure of the company for budget compliance and cost control. Performs regular analysis on the fiscal health of the organisation, takes suitable remedial measures if required, and re-orients the organisation towards financial sustenance.
• Maintains relationship with old and existing clients/consultants/contractors/sub-contractors with regular follow up meetings and sources new clients by applying a focussed marketing approach. Presents the company and its activities to clients, pre-qualifies, tenders, negotiates and finalises new projects for the company to execute.
• Responsible for the recruitment of qualified, skilled and experienced personnel and their termination. Monitors employee productivity and performance in a periodical manner and ensures the provision of professional and personal growth opportunities. Provides motivation, leadership initiative, guidance to the employees and ensures the maintenance of high morale within the company. Ensures the application of fair, ethical and nondiscriminatory employment practices and provides an equal employment opportunity environment within the organisation.
• Assesses and evaluates market conditions, trends, associated risks and sets out suitable solutions to overcome downturns, crises and abnormalities. Continuously identifies and develops opportunities for the company to expand its products, services, functions and area of operation
• Performs other duties as assigned by the Owner.

Requirements:

• Graduation from a four-year college or university with a degree in civil engineering, or closely related field
• A minimum of eight years specific experience including multiple projects management in engineering, construction management or in a closely related field of building structures.
• At least two years responsibility in an operational role covering responsibilities of estimation, planning, purchase, project management, accounting departments/individuals. Previous experience or close association in a role with full operational responsibility in a construction environment.

Job Descriptions

• Review, update and coordinate all architectural work including shop drawings for the project.
• Liaise, supervise and coordinate with sub-contractors and vendors on projects and work.
• Ensure compliance with Architectural specifications and achieve quality aspect of architectural works.
• Coordinate with architect, structural engineer and M&E engineer to resolve construction problems and issues.
• Carry out architectural works scheduling, material requisition, cost control, project supervision and documentation.
• To attend to construction site coordination works and meeting.
• Review project specifications, tender clarifications and construction drawings
• Carry out daily supervision and coordination of all architectural implementations at site.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works.
• Assist the Project Management team in ensuring that the works are carried out to schedule and in accordance with relevant regulations.
• Coordinate all architectural drawings and works, submit and update status of shop drawings and materials as well as supervise work progress.
• Performs other duties as assigned.

Requirements

• Degree/ Diploma in Architecture or its equivalent
• Minimum 3 years and above of relevant site experience in building projects
• Ability to interpret construction drawings for any discrepancies.
• Familiar with local standard quality implementation, BCA CONQUAS and other Quality Mark Assessment
• Candidate who possesses good experience and exposure will be considered higher position. Salary will be commeasured according to skill

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget

• Perform site planning, coordination and inspection that related to M&E and facilities

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Role Overview
The Business Development Executive plays a critical role in driving the company's growth by identifying new business opportunities, managing client relationships, and supporting the Business Development Manager in achieving organizational goals.

Key Responsibilities

A) Opportunity Identification & Market Expansion

- Identify new business opportunities and support the company’s strategic goals.

- Monitor market trends to ensure the company remains competitive.

- Assist in the development of business plans and strategies to target specific market segments for business expansion.

B) Client & Relationship Management

-Establish & maintain relationships with new and existing clients.

-Act as the main point of contact for clients, addressing their inquiries, understanding their needs, and ensuring a high level of customer satisfaction.

- Assist the Business Development Manager in creating and executing strategies to develop long-term client relationships and strategic partnerships.

-Coordinate client feedback and align the company’s offerings with client expectations.

Skills & Qualifications

- Experience: Minimum of 2-4 years in sales or business development roles, preferably in process industrial sectors.

- Industry Knowledge: Familiarity with refineries, shutdown jobs, and process industries.

Sales & Negotiation Skills: Proven ability to generate leads, close sales, and negotiate contracts.

- Communication Skills: Strong interpersonal and communication skills, both written and verbal.

- Relationship Management: Experience in building and maintaining strong relationships with clients and business partners.

Other Requirements

Willingness travel Jurong Island for client meetings and attend industry events.

• Prepare correspondence emails, letters, statements, documents, and reports
• Draft the company's policies, regulations, and rules, and supervise the implementation.
• Manage filing and document control for company policies, regulations, SOPs, contracts & agreements, reports, and other administrative documents.
• Possess legal knowledge and liaise with lawyers when required.
• Fully in charge of the administration department and managing administrative issues for the company.
• Process administrative work related to government authorities, associations, the company’s head office, customers, and visitors.
• Handle administrative and logistical arrangements for customers and visitors.
• Organize events by coordinating with relevant departments for planning and implementation.
• Collect training requirements from relevant departments, prepare the company training plan, and supervise its implementation.
• Collect and arrange daily and weekly activities for company management.
• Manage vehicles and drivers for the company.
• Provide backup support for colleagues in IT and HR positions.
• Undertake any other ad-hoc tasks and duties as assigned by superiors.

The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company’s heavy vehicles to and from the different work sites as required by the work schedule. The heavy vehicles include lorry crane and tipper truck.

The Driver must drive the vehicles to the required work sites punctually.

The Driver must follow the schedule obtained from the Site/ Store Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

The Driver must inform the Site/ Store Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

2 Usage of Company vehicles

The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. If the Driver uses the cash cards for personal use ie lunch parking fee, the Driver must reimburse the Company.

3 Safety

The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

The Driver must inform the Project Director immediately he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

The Driver will drive the vehicles to Inspection Centres as required.

Requirements:

• Class 3 Singapore Driving licence.

• Willing and able to do a lot of night jobs or do night shift as well as day shift. Night shift could be for more than 3 months at a time depending on project.

• Saturday is full day and able to work on Sundays when required.

• 2-3 year experience driving tipper truck with good track record

A Design Project Manager in Singapore is responsible for overseeing and coordinating design projects from initiation through to completion, ensuring that design processes meet client requirements, timelines, budgets, and quality standards. This role often involves managing teams of designers, architects, engineers, and other specialists while working closely with clients and stakeholders.

Here are the key duties and responsibilities of a Design Project Manager in Singapore:

1. Project Planning and Strategy:

• Define project scope: Collaborate with clients and stakeholders to understand and define the project’s objectives, deliverables, and key performance indicators (KPIs).
• Create project timelines: Develop detailed project plans with timelines, milestones, and deadlines.
• Set budgets: Establish project budgets, including resource allocation for design teams, equipment, and materials.
• Manage scope changes: Handle any changes to the project scope and update project plans and budgets accordingly.

2. Team Leadership and Coordination:

• Lead design teams: Manage and supervise multidisciplinary design teams, including architects, designers, engineers, and other professionals.
• Delegate tasks: Assign responsibilities to team members and ensure that they have the resources and guidance needed to meet project goals.
• Monitor progress: Track the progress of design deliverables to ensure timelines and quality standards are met.

3. Client and Stakeholder Communication:

• Client liaison: Maintain regular communication with clients to understand their needs, gather feedback, and ensure the design aligns with client expectations.
• Present designs: Present design concepts, updates, and progress to clients and stakeholders through meetings, reports, and presentations.
• Manage expectations: Ensure that clients' expectations are properly managed and met, addressing any concerns or issues promptly.

4. Design Oversight:

• Design coordination: Oversee the design development process, ensuring the quality and consistency of the design work across all stages of the project.
• Ensure design feasibility: Ensure that the proposed designs are feasible within the given budget, timeline, and technical constraints.
• Maintain design standards: Ensure that designs adhere to relevant industry standards, codes, and regulations in Singapore.
• Approve design changes: Evaluate and approve design modifications, ensuring that they align with the overall project objectives.

5. Budget and Resource Management:

• Resource allocation: Allocate resources (design staff, tools, software, etc.) efficiently to meet project needs.
• Budget management: Track and manage the design budget, ensuring that resources are utilized efficiently without exceeding financial limits.
• Cost optimization: Identify opportunities for cost-saving without compromising the design quality and functionality.

6. Risk Management:

• Identify risks: Identify potential risks associated with the design phase, including delays, cost overruns, or technical challenges.
• Mitigation plans: Develop and implement risk mitigation strategies to minimize the impact of identified risks.
• Problem resolution: Resolve issues related to design, scheduling, or budgeting that may arise during the project lifecycle.

7. Quality Assurance and Control:

• Monitor design quality: Ensure that design outputs meet the required quality standards, as defined by the client, regulations, and industry best practices.
• Conduct reviews: Organize regular design reviews to assess progress, identify any quality issues, and make necessary adjustments.
• Implement feedback: Incorporate feedback from clients, stakeholders, and the project team to improve the design process and outcomes.

8. Contract and Vendor Management:

• Manage contractors: Work with contractors, vendors, and third-party service providers to ensure design requirements are met.
• Negotiate contracts: Oversee the negotiation and management of contracts with suppliers and vendors involved in the design process.
• Vendor coordination: Ensure that external partners, such as consultants or material suppliers, meet the design specifications and project schedules.

9. Compliance and Legal Requirements:

• Adhere to regulations: Ensure that all design processes and outputs comply with Singapore’s legal, environmental, and building regulations.
• Obtain necessary approvals: Ensure that all design documents, plans, and approvals are in line with regulatory requirements and are submitted to the appropriate authorities.

10. Project Reporting and Documentation:

• Progress reporting: Provide regular progress reports to senior management and clients, including updates on design, timelines, and budgets.
• Documentation: Ensure all design documentation is accurately maintained and archived for future reference.
• Post-project review: Conduct post-project evaluations to assess the design process and identify areas for improvement for future projects.

Skills and Qualifications:

• Design Expertise: Strong knowledge of design principles, architecture, and industry-specific design software (AutoCAD, SketchUp, Adobe Creative Suite, etc.).
• Project Management Skills: Ability to manage multiple projects simultaneously, with experience using project management tools (e.g., Microsoft Project, Trello, Jira).
• Leadership and Teamwork: Ability to lead and inspire design teams, and work collaboratively with stakeholders, clients, and contractors.
• Communication Skills: Strong verbal and written communication skills to present design concepts and ideas effectively.
• Problem-Solving Abilities: Ability to solve complex design and project-related issues efficiently.
• Budget Management: Experience in managing budgets, cost estimating, and financial reporting.

• Surveying buildings and repair mechanical systems
• Performing maintenance of electrical systems
• Inspecting, analyzing, and troubleshooting systems and equipment.
• Sourcing replacement parts.
• Repairing or replacing faulty equipment.
• Fabricating any components required.
• Maintain heating and plumbing systems to ensure functionality
• Inspect alarm systems (fire, protection) and schedule repairs when needed
• Perform manual repairs when necessary

• supervise workers and subcontractors.
• help project managers to plan work.
• manage orders and deliveries of construction materials.
• organise staff work schedules.
• check work is carried out safely.
• complete records for site reports.
• attend site management meetings.

Responsibilities

• Manage daily collection operations to maximize productivity and achieve targets.
• Handle credit control tasks, including payment processing and cancellations.
• Work on recovering non-performing loans (NPLs) by creating and executing repayment strategies.
• Assign call leads and monitor team attendance and performance.
• Handle and resolve team and customer complaints, ensuring proper documentation.
• Review teams promises-to-pay (PTP) commitments according to guidelines.
• Conduct monthly performance reviews and call monitoring for quality assurance.
• Improve collection strategies and processes with management input.
• Oversee account assignments for pre-charge-off actions and agency follow-ups.
• Track collections targets and escalate any shortfalls or issues to supervisors.
• Monitor delinquency trends, providing feedback and insights to management.
• Improve processes for credit control and collections.
• Ensure compliance with industry guidelines and regulations in all collection activities.

Requirements:

• Possess at least Diploma in Banking/ Business Management or Finance or Equivalent
• At least 5 years of relevant working experience in a Bank or Financial Institution
• Good team player and able to work independently.
• Good time management skills and able to meet deadlines.

Please submit your updated resume in Word format by using the Apply Now Button.
We regret that only shortlisted candidates will be notified.

Email resume to [email protected]

People Profilers Pte Ltd, 20 Cecil Street, #08-09, PLUS Building, Singapore 049705.
Tel: 6950 9724

http://www.peopleprofilers.com
EA License Number: 02C4944
Registration Number: R1872398

Posting Personnel: Ng Jwee Ken

Ref: L4W65577

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Electrical and Control Design Engineer

Working day: Monday – Friday
Working Hour: 8:30am - 6:15pm
Salary range: $3,200 - $5,800
Location: Woodlands Ave 9

Job Summary:

• The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines. This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations. The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

WhatsApp: +65 9837 8400

Lim Jun Yao Reg No.: R1989028

The Supreme HR Advisory Pte Ltd EA No.: 14C7279

• Position : Credit Control/Debt Manager (Purchase Hire-Automotive/Consumer Finances)
• Location : Sin Ming Drive
• Working hours : Monday - Friday 9am - 6pm
• Salary (commensurate with experience) : Up to $6500 + AWS + Performance Bonus + 14 Days Annual Leave
• Duration : Permanent
• Industry : Automotive/Automobile

Main Responsibilities:

• Execute and oversee the collections department’s daily operational activities
• Develop and implement effective collection strategies to minimise delinquency rates and reduce bad debt.
• Analyse collection metrics to identify areas for improvement and ensure targets are met.
• Collaborate with other departments to enhance overall customer experience and resolve issues
• Manage communication with customers regarding overdue accounts, using a balanced approach of firmness and empathy.
• Resolve escalated customer complaints and negotiate payment arrangements or settlements.
• Develop customer retention strategies to enhance loyalty and minimise defaults.
• Ensure adherence to legal and regulatory requirements related to collections and hire purchase agreements.
• Maintain accurate records of customer interaction and payment agreements.
• Identify and implement process improvements to streamline collections operations and to enhance efficiency.
• Stay updated on industry best practices.
• Liaise with solicitors regarding collections disputes and escalations.
• Other ad-hoc activities assigned

Requirements:

• Minimum 5 years’ proven collections experience in the hire purchase or financial services industry
• Minimum Degree or equivalent qualification
• Strong knowledge of the Hire Purchase Act is a plus
• Bilingual in English and Mandarin to converse with Mandarin speaking associates

Email to: [email protected] or call me at: 6398 5682 for more information.

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Diana Okta Tio

Deputy Consulting Director (APAC)

Reg no.: R2094678

EA No: 13C6684

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Responsibilities:

• Lead the Service Department to drive business growth, improve profitability, and ensure resource scheduling, staffing levels, and coordination with production staff.
• Manage the service customer base and oversee debt collection, ensuring customer satisfaction and timely payments.
• Provide technical advice to customers, prepare quotations for supply, repair, and installation of products, and coordinate service schedules for timely delivery.
• Collaborate with the management team, negotiate and resolve customer-related disputes, and report to directors on business performance, risks, and operational issues.

Requirements:

• Diploma in a related field.
• At least 3 years of experience in a similar technical or service management role.
• Strong knowledge of company products, excellent communication, time management, and organizational skills.
• Proficient in Microsoft Office Suite, with problem-solving and a positive, assertive attitude.

Interested candidates who wish to apply for the advertised position, please click 'APPLY' to submit your application or send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

* Day to day project management, include liaison with all parties involved in the project (include the Architect, Designer, Consultant, Main & Sub Contractors, Supplier and other M&E Contractors,etc)

* Attend Site Meetings

* Preparation of work schedules and monitoring of project costing, work progress and coordination with all parties involved to ensure work progress smoothly & completed with target time and budget

* To manage project from inception to planning to completion

· To lead, supervise, and coordinate site works.

· Work closely with Project Manager to ensure contracted works meet all requirements and targeted dates.

· Resolve worksite issue quickly and effectively in order to keep work progress on track.

· Ensure all works, workers and contractors adhere to all safety regulations.

· Other duties as assigned.

· Requirements:

· Minimum 5 years experience in construction or roofing industry.

· Possess Building Construction Supervisors Safety (BSCC) certificate.

· Certificate in Lifting Supervisor.

· Able to communicate in English（Chinese） and liaise with customers and main contractors.

· 1.Handle and manage Accounts Receivables Function.

· 2.Update and maintain accounting journals.

· 3.Daily entry of receipts into the accounting system.

· 4.Process staff expense claims.

· 5.Ensure entries are charged to the correct account codes.

· 6.Handle customer's queries on the daily financial transactional activities.

· 7.Ensure timely and accurate report submission.

· 8.Generate monthly accounts receivables report.

· 9.Assist Finance Manager in other areas of accounting whenever necessary.

· 10.Perform analysis of accounts, preparation of audit schedules etc

· 11.Perform other ad-hoc duties when necessary.

· Project Planning:Define project scope, goals, and deliverables in collaboration with stakeholders.
Develop detailed project plans, timelines, and schedules.
Estimate resources and budgets for project completion.

· Budget Management:Prepare and manage the project budget.
Monitor financial performance and ensure costs are controlled.
Approve expenditures and ensure cost efficiency.

· Resource Management:Coordinate with architects, engineers, and contractors to ensure project requirements are met.
Procure materials, labor, and services, ensuring quality and adherence to the project timeline.
Ensure the availability and proper allocation of resources (staff, equipment, materials).

· Risk Management:Identify potential risks and develop mitigation strategies.
Address unexpected delays or issues that may arise during the construction process.
Ensure compliance with safety and regulatory standards.

· Team Leadership:Lead and motivate construction teams, ensuring tasks are completed as scheduled.
Collaborate with project stakeholders, clients, and other parties involved.
Communicate regularly with clients and provide project updates.

· Quality Control:Oversee the quality of work throughout the construction process.
Conduct inspections to ensure the project meets design specifications and standards.
Ensure the use of appropriate construction techniques and materials.

· Documentation and Reporting:Maintain project records, including contracts, change orders, and progress reports.
Provide regular updates on project status to stakeholders and upper management.
Prepare project closure documentation, including final reports and as-built drawings.

• Reviewing construction plans and preparing quantity requirements.
• Liaising with site managers, clients, contractors, and subcontractors.
• Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Advising managers and clients on improvements and new strategies.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Liaise with Reporting Superior and Project Managers on costing and variation works including final account with Consultants
• Attendance of site meetings /site visit where necessary.
• Generally covering the scope of a Quantity Surveyor from Pre to Post contract Works (e.g. Tendering to final account).

Cut tiles and shape them properly to ensure they fit around obstacles and in tight corners and odd spaces using power and hand tools.

Form tile beds using concrete, plaster, mastic, cement, glue or mortar utilizing tools such as screeds, brushes and trowels

Align tiles and straighten them with straightedges, levels and squares to ensure patterns are even and precise

Cut, install, polish and surface granite and marble and ensure accuracy during the installation process for lasting results

Prepare various surfaces for tiling with waterproofing material or lath and by cleaning the surfaces properly

Create decorative wall and floor designs by laying and setting mosaic tiles in kitchens, bathrooms and living rooms

Tap tiles into place carefully using tools to properly adhere tiles to the base, making sure not to break or damage tiles

Follow blueprints precisely and mark and measure surfaces that need to be tiled to determine how to go about jobs.

• Reviewing construction plans and preparing quantity requirements.
• Liaising with site managers, clients, contractors, and subcontractors.
• Scrutinizing maintenance and material costs, as well as contracts to ensure the best deals.
• Preparing reports, analyses, contracts, budgets, risk assessment, and other documents.
• Advising managers and clients on improvements and new strategies.
• Keeping track of materials and ordering more when required.
• Documenting any changes in design and updating budgets.
• Establishing and maintaining professional relationships with external and internal stakeholders.
• Liaise with Reporting Superior and Project Managers on costing and variation works including final account with Consultants
• Attendance of site meetings /site visit where necessary.
• Generally covering the scope of a Quantity Surveyor from Pre to Post contract Works (e.g. Tendering to final account).

• Activity and resource planning for site.
• Organizing and motivating a project team at site.
• Controlling time management for site.
• Cost estimating and developing the budget for site project.
• Ensuring customer satisfaction.
• Analyzing and managing project risk.
• Planning and monitoring progress of the project.
• Managing reports and necessary documentation.
• Designing and applying appropriate project management standards.
• Managing the production of the required deliverables.
• Preparing and maintaining project, stage and exception plans as required.
• Managing project risks, including the development of contingency plans.
• Monitoring overall progress and use of resources, initiating corrective action where necessary.
• Applying change control and configuration management processes for the site project.
• Experinces in Singapore Process Plant Industry.