ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

• Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.
• Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.
• Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.
• Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.
• Handle all accident and incident reports.
• Work as a team with project team members and sub-contractors to provide a safe working environment.
• Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Certified NEA, ECO, ECO, ECMO
• At least 3-5 years' on-site experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Singaporean and Malaysian apply only

Lorry pick up at Yio Chu Kang Heavy Vehicle Park

Do call or WhatsApp me.at 81619787

Job description -

• Responsible for the preparation and accurate outgoing/incoming passenger messages and other written communication
• Coordinate all passenger Service matters through ATOC and Air Mobility Command when necessary
• Maintain all updated Passenger Service AMC instructions
• Answer passenger inquiries and provide assistance
• Initiate lost and found reports
• Examine each outbound passengers's travel documentation to ensure valid travel authorisation
• Receive, tag and weigh passengers's baggage
• Prepare boarding pass and make seat assignements for all outbound passengers
• Ensure mission arrival/departure board reflects the most current information
• Prepare month end reports
• Input passenger data into AMC Global Air Transportation Execution System (GATES)
• Collect charges
• Conduct anti-hijacking inspections
• Operate Air Terminalk X-Ray machine
• Prepare passenger manifest
• Perform other related duties assigned by the Station Manager

. Develop BIM Project Execution Plans, BIM collaboration, documentation, enforcement, monitoring, and workflow to meet project requirements

. Provide solutions for BIM-related technical issues and assist project teams with BIM implementation

. Set up processes and workflows for efficient delivery of BIM deliverables

. Establish guidelines for internal and external model exchanges between project stakeholders and monitor progress

. Attend client meetings and lead decision-making processes affecting BIM deliverables

. Liaise and coordinate with other trades for cross-team support on BIM software

. Regularly meet with key project staff to update on progress and document meeting minutes

. Oversee BIM coordination and daily management of BIM project data sets/workflows and project setup

Job Requirements:

. Certificate in AutoCAD Autodesk advanced module

. Certificate in Revit MEP Autodesk advanced module

. Minimum 10 years of experience in M&E drafting using AutoCAD, Revit, and BIM preferably from the Construction industry

. Outgoing personality with strong interpersonal and communication skills

. Ability to work independently and target-oriented in a stressful environment

. Ability to work well in a team and demonstrate initiative and commitmen

• To take charge of planning, coordinating and to complete projects with a great sense of responsibility and within the stipulated timelines;
• To determine the schedules of different phases of projects based on established deadlines;
• To monitor the work progresses and operations at site, including quality control, safety issues, etc;
• To liaise with consultants, main contractors, sub-contractors, relevant authorities and internal departments in resolving project development and technical issues;
• Supervise on project and report on daily progress regarding installation work on site;
• To ensure all rectification works and installations are attended to properly;
• Assist to identify, review and assess risk arising from the workplace;
• Ensure all machinery and equipment at site are in good working conditions and having all the necessary working certificates;
• Ensure all workers at site are wearing appropriate PPE at all times;
• Conduct daily site safety inspection and enforce compliance on prevailing MOM Safety Acts and Regulations and other requirements;
• Assist to attend all issues related to workplace safety, health and environmental control;
• Liaise closely with site operations staff on all safety and health issues;
• To ensure all systems and processes are in compliance with regulatory requirements;
• To ensure of the safe measurements on site as a duties of a Safe Management Officer;
• Any other duties that may be assigned.

Requirements:

• Possess of Diploma in building or Civil engineering
• Possess of WSH qualifications, Certificate in Workplace Safety & Health
• Certified in Safety Management Officer (SMO).
• Possess at least 3 years of practical work experience in the field of health and safety in building construction;
• Good knowledge of WSH Act and other WSH related compliance;
• Possess good leadership, good communication skills, organizing abilities and independent;
• Proficient in Microsoft Office – Excel and Power Point.
• Driving license (Class 3) will be preferred.

Contract Period:

• 1 Jan 2025 to 31 Dec 2025

Deployment:

• Mondays to Thursdays: 8:00am to 5:30pm, inclusive of 1hr lunch break
• Fridays: 8:00am to 5:00pm, inclusive of 1hr lunch break
• Service not required on Saturdays, Sundays and gazetted public holidays

Scope of Works:

The personnel will be deployed to assist the Infocomm Club and shall be competent to perform the following duties and responsibilities

CCA Training

• To conduct structured computing programmes on coding (using Swift playgrounds, Scratch, Micro:bit and Makecode Arcade), App development (using Thunkable and GameSalad), 3D printing (using Tinkercad and Sketchup) and graphics (using Inkscape)
• To conduct structured computing programmes on “Learning with iPad” as part of 1:1 Personalised Learning Device Programme
• To conduct structured computing programmes on Learning Management System: Student Learning Space, Microsoft 365, Google Workspace and Apple Classroom
• To conduct structured computing programmes on Edtech tools such as gamification, Augmented Reality and Virtual Reality.
• To maintain IT tools and software used for IT programmes, workshops and Project Work

AV System & Photography

• To assist Info-Comm Club teachers-in-charge in the conduct of students AV training and support all school events and functions.
• To assist in the maintenance of school PA system.
• To assist in setting up and hosting of live streaming of school events (using OBS)
• To assist students for video productions, edit videos for school events (using Final Cut Pro)
• To monitor and drive the use of Recording Studio among the students.

Makerspace

• To conduct and organise makerspace workshops and maintain the makerspace.
• Assist Students with the use of the equipments in the Makerspace

Others

• To assist in providing IT training workshops to teachers in using Edtech for teaching and learning
• To co-teach lower secondary Project Work in coding using Design Thinking framework
• To assist in any other tasks required by HOD ICT, SH ICT, ICT Manager, Principal & Vice-Principals

*Makerspace is a collaborative work for tinkering, making, learning, exploring and protyping with maker (tech) tools.

Contract period:

2 Jan 2025 to 14 Nov 2025 (10.5 months)

Deployment:

Mon to Fri : 7 am to 1 pm or 8 am to 2 pm (Maximum 6 Hours per day)

Scope of Works:

A. Training/Induction by NFS Teachers

1. Use and general maintenance of the cookers / ovens / grill / microwave ovens / refrigerators.

2. Use and general maintenance of small kitchen appliances, such as blenders, cake mixers, food processors, electric steamers, etc.

3. Use and general maintenance of washing machine.

4. Kitchen terminology and familiarisation with common utensils, such as palette knives, patty tins, vegetable peelers, etc.

5. Food preparation, quantity and portioning for practical lessons.

6. Kitchen and food hygiene (includes proper food handling and storage).

7. Kitchen safety (handling electrical appliances and sharp objects and keeping them safe).

8. Provide update of perishables and dry goods to teachers ordering for the classes.

9. Provide update of kitchen utensils of each unit and main storage areas to teachers.

B. Daily Duties

For Practical Lessons and Examinations:

1. General cleaning of kitchens including cleaning tabletops, sinks, cookers, sweeping and mopping the floor and emptying dustbins.

2. General cleaning of NFS classrooms including cleaning desks, sweeping and mopping the floor and emptying dustbins.

3. Refill washing detergent, and check and ensure all equipment is in place for each work bench.

4. Teachers to brief the week’s practical and recipe with sample of layout given so that the kitchen helper can start preparations for the classes.

5. Preparation of food trays must be done before the lesson, at least half an hour beforehand.

6. Assist teachers during lessons, help to replenish items, clear teachers’ centre tables, assist students with cookers/ovens/grill/blenders/steamers, mop spills etc.

7. After lessons, kitchen helper to help clean up and store food properly. Any leftover ingredients that are still fresh and safe to use can be kept for use in other classes. Prepare food trays for next lesson if needed.

8. After lessons, check that all gas taps are turned off and cookers are switched off, cookers and sinks are clean, rubbish is disposed of, and clear/clean the centre store table.

9. Laundry for kitchen towels/aprons: Wash them in the washing machine and dry them on the rack. Once they are dry, fold them and place on the laundry shelf.

10. Track and record any breakages.

11. Arrange tables and chairs neatly in classrooms.

12. Check all lights, fans and air-conditioner are switched off in all rooms.

13. Assist teachers in any other duties assigned.

Remuneration: Basic with AWS & VB

+ $120 Transport Allowance + $66 (Flexible Benefit Allowance) + eMedical Card (cover spouse + children under 18)

Work location: MacPherson

Working hours: Monday to Friday

Job Description:

• Coordinate with Maintenance Team and the station staff to monitor performance of the ticketing kiosks using the Monitoring Control Console (MCC) workstation.
• Perform remote troubleshooting on the ticketing kiosks if required.
• Coordinate and work with maintenance team and station staff in:

- Compiling fault data for ticketing kiosks and generate reports.

- Combining and rearranging data from source documents where required.

- Verify data from maintenance team to ensure data accuracy and improve the ease of understanding.

• Assist in all systemwide software deployment activities to all ticketing kiosks including for Annual Fare Revision Exercise and other ad-hoc projects.
• Monitor performance of ticketing kiosks post software deployment for potential faults/issues.
• Generate backend reports of the ticketing kiosks for investigation purposes.
• Create Work Orders in the Maintenance Management System (MMS) to record details of fault troubleshooting.
• Supports in all ticketing kiosks and MCC workstation related tasks (e.g. update station layout drawing).
• Any ad-hoc additional duties as instructed if required.

Job Requirements:

• Nitec in Engineering or any other relevant field.
• Possesses high accuracy in processing information.
• Able to work independently and in a team in a challenging environment
• Candidates with no experience are welcome to apply

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Description & Requirements

• Manage team of engineers and supervisors to oversee daily tunneling activity
• Review and set TBM parameters
• Review geotechnical data and plan ahead tunneling works to ensure smooth tunnel progress
• Review and carry out procurement based on recource requirement
• Attend daily and other ad-hoc meetings with client to update on tunnel progress
• Review and prepare method statements for submission to client
• Ensure job safety analysis and site safety compliance

Requirement

• Degree in Civil engineering or equivalent
• More than 8 years hands on site experience in TBM for tunneling works, preferred with previous experience in handling Singapore MRT projects and large diameter TBM projects.
• Able to do shift work
• Independent and self-motivated

CLINIC MANAGERS

Job Description:

· Management of overall clinic operations and in accordance with the latest MOH/HCSA and other related regulatory guidelines.

· Management of stock take and expiry of inventory.

· Ordering of consumables supplies and medications with Just-In-Time inventory management.

· Upkeep of all management reports for submission.

· Handling of petty cash and banking of funds.

· Checking and submission of all CHAS and Insurance claims.

· Annual staff appraisal.

· Clinic revenue performance, budget, targets, and cost control.

· To check and approve the PO and ensure the inventory level are reasonable and do a check on the holding stock level.

· Collate Purchase Report, DO, Invoices to Purchasing dept twice a week.

· Handling of patient’s complaints and reporting to management.

· Liaison between HQ and clinic staff.

Requirements:

· Polytechnic graduate

· At least 3 years of experience in managing clinics.

· Exceptional organisational and independent problem-solving skills to ensure that quality services are provided effectively.

· Ability to identify improvement opportunities and drive continuous improvement in the clinic.

· Ability to lead, supervise and motivate clinic staff to perform their duties efficiently.

Must meet the following criteria:

1)Degree and qualifications in related field.

2)Must be able to speak and understand English so as to communicate with the team members.

3)Must be able to lead a groups of worker.

4)Must be a good leadership.

5)Must be able to coordinate workers and projects.

6)Must be able to work under tight deadlines.

Objectives of this role

1. Oversee project budgeting and cost control and manage change orders to ensure adherence to budgetary constraints.
2. Conducting regular site inspections to assess project progress, identify risks, and ensure compliance with safety protocols and regulatory requirements.
3. Maintain effective communication with project team members and stakeholders to provide project updates, address concerns and foster strong working relationships.
4. Managing procurement processes, including bid evaluations, contract negotiations and vendor selection.
5. Planning, coordinating and managing all phases of construction projects, including project initiation, planning, execution, monitoring and closeout.
6. Developing and managing project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.

Required skills and qualifications

1. A bachelor's degree in civil engineering, construction management, or a related field.
2. 3+ years of relevant experience in construction project management, with a track record of successfully delivering projects on time and within budget.
3. Excellent project management skills, including effective planning, organising and prioritising tasks.
4. Strong leadership and communication skills to manage project teams and stakeholders.
5. Proficiency in construction management software, project scheduling tools and cost estimation software.

Contract Period:

1 Jan 2025 to 31 Dec 2025

Deployment:

Mon, Tues, Wed & Friday - 6.45 am to 3.00 pm

Thurs - 6.45 am to 5.00 pm

Service not required on Sat, Sun and PH's

Scope of Works:

Front Desk Operation

• Answer incoming calls and direct calls to the relevant parties
• Take down messages and convey messages to the relevant parties concerned
• Man reception area and attend to school visitors
• Maintain the cleanliness and tidiness of the school’s reception area
• Assist the administration of security procedures i.e. sign-in / out for visitors
• Assist in collating the class registers and students’ attendance.
• Prepare the meeting rooms prior to meeting
• Receive and direct visitors to meeting room
• Arrange for refreshment if required

Other Administrative Duties

• Assist in issuing of class registers to the students or teachers
• Assist other school staff in collating non-confidential information and filing of non-confidential documents.
• Handle other administrative work assigned by Principal, Vice-Principals and Administration Manager

Requirements:

• NITEC (Office Skills) or minimum 5 GCE ‘O’ Level including pass in English Language. Officer without the required ‘O’ level passes but with relevant experience could also be considered.
• IT literate and proficient in the use of common office utility software (e.g. Microsoft Words, Excel, PowerPoint)
• Resourceful and able to harness information from various information sources (e.g. World Wide Web).
• Pleasant and service-oriented with at least 2 years’ experience as an Administrative Support Officer and have done work similar or equivalent to the job scopes mentioned above.
• Preferably have experience working in schools and deal with young children.
• Good interpersonal skills and able to relate to people
• Able to work independently and as a team player ability to use certain IT systems like SC mobile.

Contract Period:

• 2 Jan 2025 to 31 Dec 2025

Deployment:

• Mondays to Fridays: 8.00am to 3:00pm (at least 4 hours per day), inclusive of paid 0.5hr lunch break
• Service not required on Saturdays, Sundays and gazetted public holidays
• Service not required during school holidays unless required by the school.

Scope of Works:

• To facilitate all photocopying request for lessons from teachers
• To facilitate all photocopying requests from other school stakeholders
• All other duties as required by the Authority

Requirements:

• Primary School Education
• Printing Experience

Contract Period:

• 2 January 2025 – 31 Dec 2025

Deployment:

• Mondays to Fridays: 6.30am to 5:30pm, (Atleast 4 Hours) inclusive of 0.5hr lunch break
• Service not required on Saturdays, Sundays and gazetted public holidays
• Service not required during home based learning days and school holidays unless required by the school.

Scope of Works:

• Ordering and preparation of ingredients and equipment for practical lessons in the food labs
• General cleaning and maintenance of the food labs
• Checking, collating, ordering and receiving of ingredients from supplier
• All other duties as required by the Authority

Requirement:

• PSLE Certificate or equivalent
• 1 yr exp as Food Lab Assistant in Schools
• Follow Food and Beverage Safety and Hygiene Policies and Procedures

Contract Period:

2 Jan 2025 to 31 Oct 2025 (10 Months)

Deployment:

During School Working Days: Mon to Fri: 7.15 am to 4.30 PM

During School Holidays: Mon to Fri: 8.00 am to 5.15 pm

Scope of Works:

1. Food Preparation and Culinary Labs Management

• Assist teachers in preparing materials for weekly food practicals and theory lessons.
• Maintain the cleanliness of the culinary labs and preparation room on a daily basis.
• Perform daily safety checks on sharp tools, knives, and gas stoves after lessons.

2. Inventory Management

• Assist teachers in placing weekly orders for food ingredients, materials and cleaning supplies for the department.
• Support the ad-hoc purchase of raw food materials from supermarket and other vendors.
• Check and account for the delivery of ingredients and kitchen supplies.
• Keep a proper inventory record of all culinary stores and books in the Culinary Laboratories.
• Conduct termly checks of inventory items and report any items that require replacement.

3. Students Management

• Assist teachers in supervising the safety and discipline of students during lessons.

4. Other Administrative Support

• Assist in preparing materials for weekly practicals and theory lessons.
• Provide administrative support for adhoc duties and projects assigned by the School.

Qualifications & Experience:

• Registered as WSHO with MOM
• More than 3 years of experience in LTA sites

Job Description & Requirements

• Ensure that all construction activities comply with Singapore's safety regulations and standards, such as the Workplace Safety and Health Act (WSHA) and associated regulations.
• Conduct regular risk assessments to identify potential hazards on construction sites and develop plans to mitigate these risks.
• Organize and facilitate safety training programs for construction workers to educate them on safe work practices and procedures.
• Conduct routine inspections of construction sites to identify safety violations and address them promptly.
• Ensure that safety equipment and protective gear are in good condition and readily available.
• Investigate accidents, incidents, or near misses, and report them to the relevant authorities and management.
• Recommend corrective actions to prevent similar incidents in the future.
• Develop and implement emergency response plans for construction sites, including fire safety, first aid, and evacuation procedures.
• Maintain accurate safety records and documentation, including incident reports, safety training records, and safety audits.
• Promote a culture of safety among all construction workers and contractors.
• Conduct regular safety meetings with workers and management to discuss safety issues, share best practices, and address any concerns.
• Ensure that all workers are provided with and properly use personal protective equipment (PPE) as required by regulations and site-specific hazards.
• Maintain open and clear communication with construction management, contractors, and regulatory agencies regarding safety issues and compliance.
• Perform safety audits and assessments to evaluate the effectiveness of safety programs and procedures and recommend improvements.
• Maintain accurate records of safety-related documents and reports, including training records and incident reports.

Location:

• Jurong depot

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Manage customer complaints in professional manner

- Manage manpower deployment

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Any other related duties assigned by manager

Responsibilities:

• Perform data entry and other general administrative duties assigned.
• Handle documentation for freight forwarding operations
• Conduct targeted conversations with customers to identify customer needs
• Manage the complete documentation for checks in accordance to internal SOPs, government regulatory requirements and legislations to identify non-compliance
• Monitor shipments regarding to freight forwarding matter
• Follow operational policies, standards and procedures
• Conduct basic risk assessment
• Any other ad-hoc matter as assigned by superior

Requirements:

• Minimum 'N' Level and above education
• Proficient in Microsoft Office (Outlook, Excel, Powerpoint etc)
• Communication skills
• Able to multitasking and ability to manage time effectively
• Problem-solving

Responsibilities

1. Processing of data using in-house system.
2. Processing of documents and receipts.
3. Checking and verifying records.
4. Liaising with associates in verification of details.
5. Handling incoming calls, enquiries and emails.
6. Handling enquiries on payment.
7. Processing of commission payment using in-house system.
8. Assisting in ad-hoc administrative duties when required.

Requirements

1. Minimum GCE “O" level with administrative experience.
2. Meticulous and has good interpersonal skills.
3. Proficient in MS Excel/Word.
4. Positive attitude and willing to learn.
5. Able to interact effectively with people at all levels and be a team player.
6. Preference will be given to candidates who are available immediately or within short notice.

Benefits

• Conducive work environment
• Great Career Progression.
• Annual Leave up to 21 days, Additional 3 days’ Festive Leave.
• Dress Code: Smart Casual
• Medical & insurance benefit
• Overseas Staff Outing
• Birthday Voucher $50

Other Information

• Working Location: Toa Payoh (HDB Hub near Toa Payoh MRT Station)
• 5-day work week, Mondays to Fridays: 9.00am to 6.00pm

Interested candidates are invited to submit a comprehensive resume, stating the current and expected salary and date of availability.

We regret that only shortlisted applicants will be notified.