Job Descriptions

• Actively conduct risk assessments at project site and recommend measures to minimize and eliminate possible risks to any person.
• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Work closely with different teams to implement and maintain a strong safety regime on site.
• Conduct toolbox meeting and ensure the permit to work system in place.
• Work closely with different teams to implement and maintain a strong safety regime on site.vironment and practice of Company's QEHS Management System/WSH Act/Occupational safety and health at all times.
• Reporting to the WSH Manager, you will liaise closely with Project Managers on workplace safety, health and environmental issues to maintain a high level of safety at the sites.
• Ability to lead and advise on safety programs.
• Review and maintain site's WSH records.
• Other duties as assigned by management.

Job Requirements

• Degree in Safety, Health and Environment Management or other relevant subjects
• Holding Certificate in WSH Coordinator Course/ Building Construction Supervisors Safety Course and/or any Relevant Safety Certificates from any approved institutions will be preferred.
• Registered as Workplace Safety & Health Officer and Environmental Control Officer with at least five (5) years of post-registration and practical experience relevant to the scope of works of the contract.
• Good interpersonal skills.
• Ability to work under pressures in a fast pace environment.
• Working location at project site office, Pasir Ris.
• 5.5 working days
• Short notice period or can immediately onboard will be advantage.

Job Descriptions

• Actively conduct risk assessments at project site and recommend measures to minimize and eliminate possible risks to any person.
• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Work closely with different teams to implement and maintain a strong safety regime on site.
• Conduct toolbox meeting and ensure the permit to work system in place.
• Work closely with different teams to implement and maintain a strong safety regime on site.vironment and practice of Company's QEHS Management System/WSH Act/Occupational safety and health at all times.
• Reporting to the WSH Manager, you will liaise closely with Project Managers on workplace safety, health and environmental issues to maintain a high level of safety at the sites.
• Ability to lead and advise on safety programs.
• Review and maintain site's WSH records.
• Other duties as assigned by management.

Job Requirements

• Degree in Safety, Health and Environment Management or other relevant subjects
• Holding Certificate in WSH Coordinator Course/ Building Construction Supervisors Safety Course and/or any Relevant Safety Certificates from any approved institutions will be preferred.
• Registered as Workplace Safety & Health Officer and Environmental Control Officer with at least five (5) years of post-registration and practical experience relevant to the scope of works of the contract.
• Good interpersonal skills.
• Ability to work under pressures in a fast pace environment.
• Working location at project site office, Pasir Ris.
• 5.5 working days
• Short notice period or can immediately onboard will be advantage.

-Assist in daily operations
-Ensure that kitchen is properly maintained and clean
-Oversee food preperations, presentation and storage to ensure food health and safety compliceny.
-Regular checks with customers to gather feedbacks
-resolving of conflicts in a professional way

Qualities we seek are:

·Positive attitude and commitment to excellence

·Respective skills in functions to be performed

·Excellent interpersonal and communications skills

·Team work

·Willing to learn and able to work under pressure

·Experience in F&B Operations

·Preferably 3 years of previous experience in serving in restaurant

· Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

• can work on publick holidays
• can work on shifts/change of shifts
• can work and stand for long hours
• at least 10 years experiences
• have relavant certificate/diploma
• 
  
• Planning and executing departmental budgets.
• Overseeing inventory needs and undertaking office management and administration.
• Coming up with effective strategies to enhance the organization's financial health.
• Recruiting quality employees to provide high-quality customer support.
• Motivating and supervising employees.
• Evaluating the performance of your assigned employees, delivering positive and/or negative feedback, and addressing any shortcomings.
• Research methods to improve operations and reduce costs
• Monitor and report on department performance
• Supervise and train employees
• Provide administrative support (e.g. updating inventory)
• Ensure compliance with company policies and regulation

Responsibilities include:

• Assist in daily operations
• Ensure that the restaurant and kitchen is properly maintained and clean
• Oversee food preparations, presentation and storage to ensure food health and safety compliancy.
• Regular checks with customers to gather feedbacks
• resolving of conflicts in a professional way

Qualities we seek are:

·Positive attitude and commitment to excellence

·Respective skills in functions to be performed

·Excellent interpersonal and communications skills

·Team work

·Willing to learn and able to work under pressure

·Experience in F&B Operations

·Preferably 3 years of previous experience in serving in restaurant

·Must be able to work night shift and split shift

· Must be able to work extra hours or weekend if needed

Job Descriptions

• Actively conduct risk assessments at project site and recommend measures to minimize and eliminate possible risks to any person.
• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Work closely with different teams to implement and maintain a strong safety regime on site.
• Conduct toolbox meeting and ensure the permit to work system in place.
• Work closely with different teams to implement and maintain a strong safety regime on site.vironment and practice of Company's QEHS Management System/WSH Act/Occupational safety and health at all times.
• Reporting to the WSH Manager, you will liaise closely with Project Managers on workplace safety, health and environmental issues to maintain a high level of safety at the sites.
• Ability to lead and advise on safety programs.
• Review and maintain site's WSH records.
• Other duties as assigned by management.

Job Requirements

• Degree in Safety, Health and Environment Management or other relevant subjects
• Holding Certificate in WSH Coordinator Course/ Building Construction Supervisors Safety Course and/or any Relevant Safety Certificates from any approved institutions will be preferred.
• Registered as Workplace Safety & Health Officer and Environmental Control Officer with at least five (5) years of post-registration and practical experience relevant to the scope of works of the contract.
• Good interpersonal skills.
• Ability to work under pressures in a fast pace environment.
• Working location at project site office, Pasir Ris.
• 5.5 working days
• Short notice period or can immediately onboard will be advantage.

Brief Introduction AcesafeT is a Safety Footwear supplier. With a team of more than 20 years of combined experience, AcesafeT is now looking for dynamic force to join our expanding sales team!

Roles and Job Description: To boost sales and increase market share through the following ways:

Drive sales through the reach and network of existing customer database;

Find new channels and markets in re-seller market for distribution;

Research and recommend company's products to potential customers more effectively and efficiently;- Explore and negotiate with customers to generate the best possible sales outcomes;

Manage and track sales timelines, project management and budget;

Stay abreast of competition in an attempt to find and maintain a competitive edge.

Candidate must possess at least Professional Certificate/NiTEC, Diploma/Advanced/Higher/Graduate Diploma in Business Studies/Administration/Management, Marketing or equivalent.

Ability to excel under pressure

Good verbal and written communication skills

Good Interpersonal skills

Business Acumen with some level of strategic thinking

Possess experience in the areas of Sales, Communications, Marketing

Comany Vehicle provided (advantage if prossess own Vehicle)

At least 2 Year(s) of working experience in the related field will be an advantage for this position.

Proficient with MS Office and Social Media platforms (advantage)

Duties & Responsibilities

~ Understand & be able to operate all equipment & troubleshooting

~Ability to understand the production schedule & ensure the schedule is

followed.

~Responsible for ensuring the inventory management system is being

utilized correctly & accurately.

~Ensuring effective worker relations; providing worker coaching &

development; resolving worker issues through problem resolution.

~Balancing quality, productivity, cost, safety & morale to achieve positive

results in all areas; working to continuously improve in all areas.

~Managing departmental performance measures, including visual controls

& providing regular progress reports.

~Monitor systematic key performance indicators & help with continuous

improvement on said findings.

~Record daily numbers & send updated report throughout the end of day

~Responsible for ensuring all workers are adhering to safety guidelines.

~Training all workers & Tracking absenteeism.

job description:

• Manage and store vendors’ contracts and invoices
• Coordinate communication between front of the house and back of the house staff
• Prepare shift schedules
• Supervise kitchen and wait staff and provide assistance, as needed
• Keep detailed records of daily, weekly and monthly costs and revenues
• Monitor compliance with safety and hygiene regulations
• Gather guests’ feedback and recommend improvements to our menus

Requirements:

• Work experience as a F&B supervisor or similar role in the hospitality industry.
• Good math and reporting skills
• Customer service attitude
• Communication and team management abilities
• Availability to work within opening hours (e.g. evenings, holidays, weekends)

Key Responsibilities:

• Perform boundary, topographic, construction, and as-built surveys for various construction projects (roads, buildings, utilities, etc.).
• Determine and record land features, distances, and elevations on construction sites, ensuring all data is accurately collected and documented.
• Operate advanced surveying instruments such as Total Stations, GPS (Global Positioning Systems), levels, and laser scanners to collect field data.
• Review and analyze survey data for consistency and accuracy; create detailed survey reports, drawings, and maps based on the information gathered.
• Assist in the creation of detailed site plans and construction drawings, ensuring all measurements align with the project specifications.
• Work closely with engineers, project managers, and other stakeholders to provide timely and accurate survey information for project planning and execution.
• Ensure that construction is progressing according to plan by regularly measuring and confirming on-site layout, elevations, and alignment.
• Make sure that all survey work complies with relevant local, state, and national building codes, regulations, and industry standards.
• Ensure all surveying equipment is well-maintained, calibrated, and ready for fieldwork.

Qualifications:

• Bachelor’s degree in Surveying, Geomatics, Civil Engineering, or a related field.
• Proven experience (minimum 3 years) as a Land Surveyor in the construction industry.
• Proficient with survey equipment (Total Stations, GPS, levels, and laser scanning devices).
• Skilled in AutoCAD, GIS software, or other surveying software for data analysis and drawing generation.
• Knowledge of surveying principles, standards, and best practices within the construction industry.
• Familiarity with local land use regulations, zoning laws, and construction codes.
• Professional Land Surveyor (PLS) certification preferred or working toward certification.
• Strong proficiency in mathematics, geometry, and trigonometry for calculating land measurements and elevations.
• Ability to identify discrepancies or errors in data and work to resolve them.
• Strong verbal and written communication skills to collaborate with team members and document survey findings.
• Experience with drone surveying, 3D laser scanning, and modern technologies in land surveying.
• Advanced knowledge of AutoCAD Civil 3D or similar software for creating detailed designs.
• Experience with construction site layout and monitoring construction processes.
• Ability to work in remote or challenging environments.
• Strong organizational skills to manage multiple projects and deadlines.

BIM Implementation and Management:

• Oversee and manage the overall implementation of BIM across projects.
• Ensure adherence to established BIM standards, protocols, and best practices.
• Collaborate with project teams to develop project-specific BIM execution plans.
• Establish and manage BIM workflows, model integration, and coordination.
• Implement new BIM technologies and tools to improve project outcomes.
  

Team Leadership and Collaboration:

• Lead and mentor a team of BIM coordinators and technicians.
• Coordinate with architects, engineers, contractors, and other stakeholders to ensure BIM is integrated effectively into the design and construction processes.
• Facilitate BIM coordination meetings and manage clash detection and resolution.
• Provide BIM-related training and support to staff and project teams.
  

Project Coordination and Quality Control:

• Ensure accurate, consistent, and high-quality BIM models and data across all stages of the project lifecycle.
• Review and validate BIM models for accuracy, completeness, and compliance with project requirements.
• Manage and monitor BIM-related schedules and deliverables to ensure timely completion.
• Perform quality control checks on BIM data, including clash detection, model validation, and ensuring consistency between disciplines.
  

Software and System Management:

• Maintain and update BIM software tools and platforms (e.g., Revit, Navisworks, BIM 360, etc.).
• Work with IT teams to ensure BIM software is up-to-date and fully integrated with other project management systems.
• Troubleshoot software-related issues and assist with technical support.
  

Process Improvement and Innovation:

• Continuously evaluate and improve BIM processes to ensure they align with project requirements and industry standards.
• Research and incorporate new BIM technologies, trends, and innovations into the company's workflows.
• Monitor BIM performance and make recommendations for improvements based on project feedback and outcomes.
  

Client and Stakeholder Engagement:

• Communicate BIM progress, challenges, and achievements to clients and stakeholders.
• Provide technical support and assistance to external partners, clients, and consultants involved in BIM processes.
• Ensure that all BIM documentation is prepared and delivered according to client specifications.
  

Qualifications:

• Minimum Bachelor's degree in Architecture, Engineering, Construction Management, or a related field.
• Minimum of 5 years of experience in BIM management or related roles in the architecture, engineering, or construction industry.
• Proven experience leading BIM teams and managing large-scale projects
• Experience with BIM software such as Autodesk Revit, Navisworks, BIM 360, AutoCAD, and other related tools.
• Strong knowledge of BIM standards, protocols, and processes (e.g., ISO 19650, BIM Level 2).
• Excellent project management and organizational skills.
• Strong leadership abilities and experience in team management.
• Proficiency in data management and model coordination.
• Ability to troubleshoot technical issues and provide support to team members.
• Effective communication skills, both written and verbal.
• Knowledge of construction and design workflows, including clash detection, coordination, and integration.

Key Responsibilities

• Oversee and coordinate the development of BIM models across various disciplines (architecture, structural, MEP, etc.).
• Ensure the integration of models from different teams and disciplines, ensuring compatibility and alignment with project requirements.
• Facilitate the use of common data environments (CDE) for the management and sharing of BIM data and models.
• Ensure that all team members adhere to project-specific BIM protocols, standards, and workflows.
• Use BIM software (e.g., Navisworks, Revit) to perform clash detection and conflict resolution between models.
• Coordinate the resolution of clashes or conflicts by collaborating with design teams to make necessary adjustments to the models.
• Organize regular coordination meetings to address any model integration or clash issues.
• Ensure that all BIM models are accurate, complete, and up to date, adhering to established quality standards and specifications.
• Conduct regular audits of models to check for consistency, accuracy, and compliance with project requirements.
• Support team members in maintaining the quality of models and data throughout the project lifecycle.
• Provide technical support and training to project teams regarding BIM software, workflows, and best practices.
• Help resolve technical issues related to BIM tools and ensure smooth communication across teams.
• Stay up to date with new BIM tools, technologies, and best practices and share knowledge with the team.
• Prepare and maintain BIM-related documentation, such as BIM execution plans, coordination reports, and model review checklists.
• Generate and distribute regular reports on BIM progress, clash resolutions, and model integration status to project stakeholders.
• Keep track of the project's BIM-related deliverables, ensuring they are completed on time and according to specifications.
• Act as the primary point of contact for all BIM-related matters, facilitating communication between different project teams.
• Attend and participate in project meetings, providing updates on BIM progress and addressing any issues.
• Work closely with project managers, designers, engineers, and contractors to ensure seamless BIM integration across all phases of the project.

Qualifications

• Bachelor’s degree/Diploma in Architecture, Engineering, Construction Management, or a related field.
• Certification in BIM (e.g., Autodesk Certified Professional, Revit certification).
• Minimum of 3 years of experience in BIM coordination or a related role within the architecture, engineering, or construction industry.
• Proven experience with BIM software such as Autodesk Revit, Navisworks, AutoCAD, and BIM 360.
• Experience with clash detection and coordination tools is highly preferred.
• Familiarity with BIM standards, protocols, and the implementation of BIM processes in construction projects.
• Strong understanding of BIM processes and workflows, including model creation, coordination, and integration.
• Proficiency in BIM software (e.g., Autodesk Revit, Navisworks, BIM 360, etc.).
• Ability to manage and coordinate complex projects across multiple teams and disciplines.
• Excellent problem-solving skills and ability to troubleshoot model coordination and technical issues.
• Strong organizational and time-management skills.
• Excellent communication skills, both written and verbal, to interact with internal teams and external stakeholders.
• Attention to detail and a commitment to quality and accuracy in BIM models.

Roles & Responsibilities Technician ensures that construction projects are executed smoothly and efficiently. Here’s a general job description for a Construction Site Technician:

Responsibilities:
- Site Preparation: Assist in preparing the construction site by setting up equipment, tools, and materials needed for the project.
- Technical Support: Provide technical support to the construction team, including troubleshooting equipment or construction plan issues.
- Quality Control: Monitor construction activities to ensure compliance with design specifications, safety regulations, and quality standards.
- Data Collection: Gather and record data related to construction progress, material usage, and labour hours.
- Equipment Maintenance: Perform routine maintenance and minor repairs on construction equipment and tools.
- Communication: Collaborate with engineers, project managers, and other team members to ensure project goals are met.
- Safety Compliance: Ensure that all safety protocols are followed on-site and report any safety hazards or incidents.
- Documentation: Maintain accurate records of construction activities, changes to plans, and any issues encountered.

Qualifications:
- Education: A diploma or degree in construction management, civil engineering, or a related field is often preferred.
- Experience: Previous experience in a construction role or technical position is beneficial.
- Technical Skills: Proficiency in reading blueprints, technical drawings, and using construction software.
- Problem-Solving: Strong analytical and problem-solving skills to address on-site challenges.
- Communication: Good verbal and written communication skills for effective collaboration.
- Attention to Detail: Keen attention to detail to ensure high-quality work and adherence to specifications.
- Physical Stamina: Ability to work in various weather conditions and perform physical tasks as needed.

Key Responsibilities

• Oversee and coordinate the development of BIM models across various disciplines (architecture, structural, MEP, etc.).
• Ensure the integration of models from different teams and disciplines, ensuring compatibility and alignment with project requirements.
• Facilitate the use of common data environments (CDE) for the management and sharing of BIM data and models.
• Ensure that all team members adhere to project-specific BIM protocols, standards, and workflows.
• Use BIM software (e.g., Navisworks, Revit) to perform clash detection and conflict resolution between models.
• Coordinate the resolution of clashes or conflicts by collaborating with design teams to make necessary adjustments to the models.
• Organize regular coordination meetings to address any model integration or clash issues.
• Ensure that all BIM models are accurate, complete, and up to date, adhering to established quality standards and specifications.
• Conduct regular audits of models to check for consistency, accuracy, and compliance with project requirements.
• Support team members in maintaining the quality of models and data throughout the project lifecycle.
• Provide technical support and training to project teams regarding BIM software, workflows, and best practices.
• Help resolve technical issues related to BIM tools and ensure smooth communication across teams.
• Stay up to date with new BIM tools, technologies, and best practices and share knowledge with the team.
• Prepare and maintain BIM-related documentation, such as BIM execution plans, coordination reports, and model review checklists.
• Generate and distribute regular reports on BIM progress, clash resolutions, and model integration status to project stakeholders.
• Keep track of the project's BIM-related deliverables, ensuring they are completed on time and according to specifications.
• Act as the primary point of contact for all BIM-related matters, facilitating communication between different project teams.
• Attend and participate in project meetings, providing updates on BIM progress and addressing any issues.
• Work closely with project managers, designers, engineers, and contractors to ensure seamless BIM integration across all phases of the project.

Qualifications

• Bachelor’s degree/Diploma in Architecture, Engineering, Construction Management, or a related field.
• Certification in BIM (e.g., Autodesk Certified Professional, Revit certification).
• Minimum of 3 years of experience in BIM coordination or a related role within the architecture, engineering, or construction industry.
• Proven experience with BIM software such as Autodesk Revit, Navisworks, AutoCAD, and BIM 360.
• Experience with clash detection and coordination tools is highly preferred.
• Familiarity with BIM standards, protocols, and the implementation of BIM processes in construction projects.
• Strong understanding of BIM processes and workflows, including model creation, coordination, and integration.
• Proficiency in BIM software (e.g., Autodesk Revit, Navisworks, BIM 360, etc.).
• Ability to manage and coordinate complex projects across multiple teams and disciplines.
• Excellent problem-solving skills and ability to troubleshoot model coordination and technical issues.
• Strong organizational and time-management skills.
• Excellent communication skills, both written and verbal, to interact with internal teams and external stakeholders.
• Attention to detail and a commitment to quality and accuracy in BIM models.

BIM Implementation and Management:

• Oversee and manage the overall implementation of BIM across projects.
• Ensure adherence to established BIM standards, protocols, and best practices.
• Collaborate with project teams to develop project-specific BIM execution plans.
• Establish and manage BIM workflows, model integration, and coordination.
• Implement new BIM technologies and tools to improve project outcomes.

Team Leadership and Collaboration:

• Lead and mentor a team of BIM coordinators and technicians.
• Coordinate with architects, engineers, contractors, and other stakeholders to ensure BIM is integrated effectively into the design and construction processes.
• Facilitate BIM coordination meetings and manage clash detection and resolution.
• Provide BIM-related training and support to staff and project teams.

Project Coordination and Quality Control:

• Ensure accurate, consistent, and high-quality BIM models and data across all stages of the project lifecycle.
• Review and validate BIM models for accuracy, completeness, and compliance with project requirements.
• Manage and monitor BIM-related schedules and deliverables to ensure timely completion.
• Perform quality control checks on BIM data, including clash detection, model validation, and ensuring consistency between disciplines.

Software and System Management:

• Maintain and update BIM software tools and platforms (e.g., Revit, Navisworks, BIM 360, etc.).
• Work with IT teams to ensure BIM software is up-to-date and fully integrated with other project management systems.
• Troubleshoot software-related issues and assist with technical support.

Process Improvement and Innovation:

• Continuously evaluate and improve BIM processes to ensure they align with project requirements and industry standards.
• Research and incorporate new BIM technologies, trends, and innovations into the company's workflows.
• Monitor BIM performance and make recommendations for improvements based on project feedback and outcomes.

Client and Stakeholder Engagement:

• Communicate BIM progress, challenges, and achievements to clients and stakeholders.
• Provide technical support and assistance to external partners, clients, and consultants involved in BIM processes.
• Ensure that all BIM documentation is prepared and delivered according to client specifications.

Qualifications:

• Minimum Bachelor's degree in Architecture, Engineering, Construction Management, or a related field.
• Minimum of 5 years of experience in BIM management or related roles in the architecture, engineering, or construction industry.
• Proven experience leading BIM teams and managing large-scale projects
• Experience with BIM software such as Autodesk Revit, Navisworks, BIM 360, AutoCAD, and other related tools.
• Strong knowledge of BIM standards, protocols, and processes (e.g., ISO 19650, BIM Level 2).
• Excellent project management and organizational skills.
• Strong leadership abilities and experience in team management.
• Proficiency in data management and model coordination.
• Ability to troubleshoot technical issues and provide support to team members.
• Effective communication skills, both written and verbal.
• Knowledge of construction and design workflows, including clash detection, coordination, and integration.

Working with high and low voltage equipment; and managing power generation, transmission and distribution

Developing electrical equipment and power distribution equipment specifications, as well as preparing electrical load calculations for single and three phase loads

Utilizing experience with power system analysis tool to prepare electrical single line drawings, schematics and detail drawings as required

Managing and maintaining building services, such as lighting, heating, ventilation and lift systems; and working with renewal energy sources

Overseeing maintenance, testing and repair of company-owned electrical equipment; and reporting issues on time to the managing authorities

Drawing up project plans, making models, prototypes and circuit diagrams for high and low voltage electrical equipment; and carrying out feasibility studies for new technical developments.

Good MS Word and Excel proficiency, as well as good verbal and written communication skills

Interpersonal and leadership skills; and ability to work well alone and in a team.

Main Duties:

• Overseeing the construction activities and progress, planning, implementation and monitoring work schedules in accordance to the master and detailed work programme
• Liaise with Professional Engineer on the Temporary works
• Liaise with consultants for technical issues and coordinate the site activities with subcontractors
• Handing of technical and engineering problems
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule, quality standards are maintained site inspections are carried out and technical issues are resolved on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep site safer and neat
• Supervise ongoing site activities closely
• Other ad-hoc assigned by the Company

Responsibilities:

• Diploma/Degree in Civil Engineering or Recognised Certificate in the relevant field subject.
• Min. 2-5yrs experience in the construction site.
• Proficient in verbal and written english and mandarin

Responsibilities

• Responsible for quantity take off and cost estimation
• Preparation of tender & quotation submission and follow up with tender clarifications and interview
• Source quotation, liaise and negotiate with subcontractors and suppliers
• Preparation and resolution of progress claims, variation orders and final accounts
• Evaluation and certification of subcontractors’ progress claims, variation orders and final account
• Attend site meetings to capture all variation claims, preparation of interim valuations and potential variation works
• Liaise with Client and Consultants on all contractual issues
• Handle other assigned duties or related job as and when required

Requirements

• Minimum 5 years relevant working experience
• Able to work independently and under pressure
• Proactive, meticulous and well organized
• Team player with Positive learning and working attitude
• Working location : near to Beauty World MRT

Key Responsibilities:

• Perform boundary, topographic, construction, and as-built surveys for various construction projects (roads, buildings, utilities, etc.).
• Determine and record land features, distances, and elevations on construction sites, ensuring all data is accurately collected and documented.
• Operate advanced surveying instruments such as Total Stations, GPS (Global Positioning Systems), levels, and laser scanners to collect field data.
• Review and analyze survey data for consistency and accuracy; create detailed survey reports, drawings, and maps based on the information gathered.
• Assist in the creation of detailed site plans and construction drawings, ensuring all measurements align with the project specifications.
• Work closely with engineers, project managers, and other stakeholders to provide timely and accurate survey information for project planning and execution.
• Ensure that construction is progressing according to plan by regularly measuring and confirming on-site layout, elevations, and alignment.
• Make sure that all survey work complies with relevant local, state, and national building codes, regulations, and industry standards.
• Ensure all surveying equipment is well-maintained, calibrated, and ready for fieldwork.

Qualifications:

• Bachelor’s degree in Surveying, Geomatics, Civil Engineering, or a related field.
• Proven experience (minimum 3 years) as a Land Surveyor in the construction industry.
• Proficient with survey equipment (Total Stations, GPS, levels, and laser scanning devices).
• Skilled in AutoCAD, GIS software, or other surveying software for data analysis and drawing generation.
• Knowledge of surveying principles, standards, and best practices within the construction industry.
• Familiarity with local land use regulations, zoning laws, and construction codes.
• Professional Land Surveyor (PLS) certification preferred or working toward certification.
• Strong proficiency in mathematics, geometry, and trigonometry for calculating land measurements and elevations.
• Ability to identify discrepancies or errors in data and work to resolve them.
• Strong verbal and written communication skills to collaborate with team members and document survey findings.
• Experience with drone surveying, 3D laser scanning, and modern technologies in land surveying.
• Advanced knowledge of AutoCAD Civil 3D or similar software for creating detailed designs.
• Experience with construction site layout and monitoring construction processes.
• Ability to work in remote or challenging environments.
• Strong organizational skills to manage multiple projects and deadlines.

Roles & Responsibilities

Job Description:

• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Perform site planning, coordination and inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Liaise with the BIM team to update the drawings or BIM Model with the latest information available timely
• Prepare as-built drawings or BIM Model and compile O&M Manual for submission
• To assist in project coordination and oversee of all Civil and Structural works on site and ensure all related activities are carried out as per drawings
• Review architectural & structural submission documents & submission drawings prior relevant authorities' submission
• Assist the Project team in site walk-down survey with other discipline engineers and Client representatives as required, in resolving technical issues until construction completion
• Liaise with internal and external parties for project management
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum of 2 years’ experience
• Recognized Degree in Civil Engineering, Project Management, Structural Engineering or equivalent approved by PEB, BOA or SISV
• Good knowledge of technical design and engineering, construction methodology and construction planning
• Good oral, written and inter-personal communications skills in dealing with individuals and groups at all levels
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment
• Obtain CONQUAS supervisor certificate will be added advantage

You will be required to:

• Perform pre-flight operations and post-flight operations on all training devices and complete the necessary documentation.
• Perform all preventive maintenance works and corrective maintenance works on all training devices as assigned.
• Respond to customers' training needs in a courteous and timely manner to ensure that the required reliability and availability of all training devices are met consistently.
• Adhere to AST’s quality standards.
• Assist in diagnosis on all training devices to isolate mechanical or electrical faults and repair faulty components where possible.
• Assist in the modification and upgrading of simulators training devices and related system components, devices, hardware, and software.
• Assist in running Qualification Test Guides.
• Perform logistical/administrative duties as demanded, including updating of technical documentation or logistical information.
• Perform housekeeping functions to maintain the simulator, training devices and related components.
• Make spare parts requests, shipping and receiving of parts and components.
• Assist and participate in national aviation authorities’ evaluations.
• Perform task to support our team as required.

You would ideally possess:

• Diploma or University bachelor’s degree in an engineering field (Aviation, Electronics, Automation, Mechanical etc).
• 1 to 2 years of relevant experience.
• Ability to work in a dynamic environment on a 12 Hour rotating shift (Day/Night) roster.
• Ability to read technical drawings and schematics of electronics, electrical and mechanical systems.
• Analytical thinking, with a high level of responsibility and ownership.
• Ability to work independently as well as in a team and have a result-oriented mindset.
• Experience in using and repairing PLC, electronics and computer equipment is advantageous.
• Experience in working with simulators or a similar field is advantageous.
• Ability to commence work immediately or within short notice is preferred.
• Entry Level is welcomed.
• Able to work 12 hours shift.

Operations Supervisor Job Description Template

We are looking for a detail-oriented individual to join our team as the operations supervisor. The responsibilities of the operations supervisor include training and supervising employees, reducing operational costs, monitoring their department's compliance with operational policies, and keeping up-to-date with the progress of administrative duties.

To be successful as an operations supervisor, you should be result-oriented with excellent organizational skills. Ultimately, a top-notch operations supervisor has excellent leadership, project management, and administrative management skills.

Operations Supervisor Responsibilities:

• Planning and executing departmental budgets.
• Overseeing inventory needs and undertaking office management and administration.
• Coming up with effective strategies to enhance the organization's financial health.
• Recruiting quality employees to provide high-quality customer support.
• Motivating and supervising employees.
• Evaluating the performance of your assigned employees, delivering positive and/or negative feedback, and addressing any shortcomings.
• Designing and implementing departmental policies, procedures, goals, and objectives.
• Evaluating and reporting on department metrics to upper management.
• Developing strategies to improve department metrics and performance.
• Improving the work environment and operations of your department and the organization as a whole.

Operations Supervisor Requirements:

• A high school diploma or GED.
• A bachelor's or associate's degree in operations management or business management may be advantageous.
• Proven work experience in the relevant department.
• Experience in implementing operational processes.
• Good working knowledge of operational procedures and policies.
• Strong project management, administrative management, and organizational skills.
• Excellent leadership and decision-making skills.
• Great communication and interpersonal skills.

Supervisor Job Description Template

We are looking for a supervisor who will be in charge of managing one of our working shifts. Duties primarily revolve around the general management of your direct reports, which include, but are not limited to, providing and demonstrating task instructions, keeping attendance, and measuring key performance indicators. You will be expected to keep records and produce reports that will be used to review team performance.

In order to be successful in this role, you will need to have excellent communication skills and a passion for excellence. Previous leadership experience is a plus.

Supervisor Responsibilities:

• Making sure employees that report to you meet performance expectations.
• Giving instructions or orders to subordinate employees.
• Ensuring that the work environment is safe, secure and healthy.
• Meeting deadlines.
• Approving work hours.
• Ensure great customer service at all levels.

Supervisor Requirements:

• Previous leadership experience.
• Excellent communication skills.
• Eye for detail and accuracy.
• Reliable, with high integrity and strong work ethic.
• Ability to work as part of a team.
• Professional appearance and attitude.
• Computer literacy.
• Proactive organizational skills.
• High school diploma.
• Ability to keep a positive attitude in a fast-paced environment.

Job Description & Requirements

We are seeking a Clinic Operations Manager who can communicate effectively with English, Mandarin and Bahasa speaking clients. There are no age restrictions for this role. The ideal candidate should have prior experience as a Clinic Operations Manager. We are looking for someone available for immediate employment.

Key Responsibilities:

• Strategic Planning and Implementation
• Process Improvement
• Resource Management
• Quality Assurance
• Team Leadership and Development
• Financial Management
• Clinic Operations Management
• Supply Chain Management
• Performance Monitoring
• Compliance and Risk Management
• Customer Service Management
• Communication and Reporting
• Social Media Engagement
• Project Management

Qualifications:

• communicate effectively with English, Mandarin and Bahasa speaking clients
• Basic computer skills.
• Experience in handling complete clinic operations
• Experience in the clinical domain is a plus.
• Previous experience as a clinic operations manager is a must.
• Willingness to learn and undergo training.
• Strong interpersonal and communication skills.
• Salary can be considered dependent on work experience.

If you are passionate about healthcare and have experience in Clinic Operations or are willing to learn, we encourage you to apply. Immediate employment is available

Responsibilities:

• Provide chauffeuring services to family members
• Able to commit fully to Chairman timing
• Willing to work on weekends and public holidays (Whenever Chairman or family members needed)
• Conduct basic maintenance check on vehicle and ensure that the vehicle is well maintained
• Regular housekeeping on vehicle to ensure cleanliness
• Perform any ad-hoc duties as assigned

Requirements:

• Possess valid class 3 driving licence with clean driving records
• At least 3 to 5 year(s) of working experience in the related field is required
• Responsible, punctual and reliable
• Must be willing to travel to east side in the morning to collect the vehicle (Toyota Alphard).
• Familiar with Singapore roads and landmarks
• Able to communicate in Mandarin

Other Information:

• Working hours is flexible, follow Chairman's schedule
• Pays are flexible depends on the background
• Attractive remuneration Package (including OT)
• This is a long term job