The work scope for the above job title is as but not limited to the following:

1 The main task of the Driver is to drive the Company’s heavy vehicles to and from the different work sites as required by the work schedule. The heavy vehicles include lorry crane and tipper truck.

The Driver must drive the vehicles to the required work sites punctually.

The Driver must follow the schedule obtained from the Site/ Store Supervisors and Co-ordinator. The Driver must inform the parties involved if there are any clashes in schedule before proceeding.

The Driver must inform the Site/ Store Supervisors and Co-ordinator as soon as possible if he is delayed in his schedule. This will enable them to plan their resources efficiently.

2 Usage of Company vehicles

The Driver is to switch off the ignition completely and remove the key when the vehicle is parked and not in use. The Driver must not leave the vehicle in idle mode while waiting.

The Driver must understand that the Company’s vehicles and attached cash cards are solely to be for Company use. If the Driver uses the cash cards for personal use ie lunch parking fee, the Driver must reimburse the Company.

3 Safety

The Driver must drive and operate the vehicles in a safe manner in accordance to local laws.

If there are loads on the vehicles, the Driver must ensure the loads are properly secured in accordance with local laws and regulations.

The Driver must inform the Project Director immediately he is involved in an accident while driving or operating the vehicle. This includes causing damage to third party property.

The Driver should understand that if the accident is caused by the Driver’s negligence, the Company is entitled to pursue part or all of the claims from him.

The Driver should also understand if he incurs any traffic offences due to his own negligence, the Company is entitled to pursue part or all of the claims from him.

4 Servicing and Maintenance

The Driver is to inform the Company if any of the vehicles are unsafe to operate and require repairs. The Driver must not operate the vehicles in such situation.

The Driver will drive the vehicle to the Company appointed workshop for servicing and maintenance. The Driver will also pick up the vehicle when servicing and maintenance is completed.

The Driver will drive the vehicles to Inspection Centres as required.

Requirements:

• Class 4 Singapore Driving licence.

• Willing and able to do a lot of night jobs or do night shift as well as day shift. Night shift could be for more than 3 months at a time depending on project.

• Saturday is full day and able to work on Sundays when required.

• 2-3 year experience driving tipper truck with good track record

Roles & Responsibilities

· To study all Authority's and approved Contractor's drawings for necessary supervision work

· Supervise all Civil, Structural and Geotechnical works, both permanent and temporary

· To ensure that contractor had obtained all necessary permits and clearance to work

· To conduct site inspection and ensure that contractor(s) implement corrective actions and timely preventive/mitigation measures prior to casting or construction works

· To coordinate the contractor, QP(D), relevant agencies, including interfacing contractors and consultants, etc. for the required works

· To evaluate and assess all formwork support systems and ensure contractor submit COS endorsed by a PE prior to loadings/casting

· To review and supervise safety, environmental and health matters

· To supervise the installation/decommissioning of instrumentation

· To evaluate and assess the trend of instrumentation monitoring and alert QP for any signs of structural distress and instrumentation breach

· To review Contractor's Method of Statements and Risk Assessments and supervise all works in relation to current Code of Practice and approved BCA drawings

Requirements:

· Qualified candidates please submit in your updated resume in MS Word format with your latest RTO cert attached

· IES recognized Diploma or Degree in Civil and Structural Engineering

· At least 4 years’ of Civil Structural experience, of which 2-3 years’ experience in MRT projects ot LTA Road projects·Possess a valid RTO cert 2021 and 2022 by JAC of IES/ACES as QSS Singapore

· Willing to adhere to Civil Contract’s specifications and scope of work by the project team

· Candidate to be able to work shift works due to the demands of the project

Job Responsibilities

Assist Construction Manager in daily works

Assist Construction Manager in managing and control of subcontractor activities in all aspects to successfully meet the project specifications and schedules in accordance with the performance requirements and project objectives

Review subcontractor submissions

Lead the discussion and meeting with subcontractors

Overseeing and controlling of subcontractor construction/fabrication at yards (if applicable), off site, and on site

Organize subcontractor for site inspection of the construction activities with Client

Construction coordination between sub-contractors and partners

Develop the construction schedule, and prepare the monthly and weekly schedule, and monitor the implementation of these schedules

To facilitate planner to exercise his/her planning/ scheduling works

Take part in site construction coordination meeting and resolve issues

Take part in cost control, review the variation claim and monthly progress payment application

Any tasks or jobs assigned by Management

Job Requirements

Degree/ Diploma in Chemical or Mechanical Engineering or equivalent

Minimum 5 years of relevant working experience in design, construction or operations

Familiar with process engineering, mechanical system and their standards in related discipline

Related working experience in thermal power plant, process industries and mechanical handling equipment

Conduct primary technical reviews of the contractors work and ensure approvals are obtained where relevant

Evaluate and advise on electrical related design changes and non-conformances to ensure fulfilment of the requirements

Identify new business opportunities and have involvement in bids/tenders etc

Provides guidance and direction on department design guides, standards, systems, applicable engineering codes and policies

Independently applies knowledge and complies with quality program relative to assigned tasks

Oversees collection, assimilation, and management of data for engineering work

May offer other services to the clients

Provide electrical engineering and technical expertise to ensure the safe and reliable operation of electric power systems in processing facilities worldwide

Originate plans and develop strategies for power systems worldwide to ensure electrical reliability and safety in the most cost effective manner

Participate in engineering design through all phases of the process

Preparation or supervision of drawings for plant general arrangements, power single line diagrams, cable block diagrams, instrumentation loop diagrams, P&IDs, control system architecture drawings, and cable, instrument and I/O schedules at detailed design level.

Some electrical design will also be required for integration and system development of electro-mechanical systems

Assist in design and documentation of vehicle electrical architecture

Develop Project Timelines in support of Program milestones

Development and Release of Engineering Component and Assembly Drawings

Resolve Test Issues and Document Through the use of the PDCA Process

Test and certification report generation

Provides electrical engineering and project management expertise in support of projects, to ensure stated quality, operational, safety, schedule and budget objectives are met

Provide training to electricians on safety

Ensure complete and current electrical prints for all machines

Maintain documentation for all electrical components used

Organize documentation and electrical prints

Design Circuit Card Assemblies (CCA) using Altium Designer for Schematic, and layout

A working knowledge of cost estimating, code review, field investigation, report and memo writing and other similar electrical engineering related tasks

Power distribution, essential power systems including generators and UPS, Substations, transformers, metering, primary and secondary switchgear, motor control and motor control centers Life Safety including Fire Alarm system design

Prepare reports, proposals, and tender/bid submissions, budgets, project plans and other supporting documentation as required

Develop standards related to our electrical engineering practice, ensuring best practices for project delivery, and when applicable sustainable building constructions

Lighting, Lighting Control systems.

Manage internal and external stakeholders - Support and run the commercial and contractual side of projects

Evaluates and test components

Ensures design, fabrication, maintenance and repair methods/processes are developed executed in a manner, which supports all quality standards

Develops, designs low voltage (600V) and medium voltage (15kV) and high voltage (115kV) electrical distribution systems for building, industrial and utility facilities

Performs electrical system design for switchgear, switchboards, motor control centers, variable frequency drives, generators, transformers, distribution panels and various raceway systems

Designs underground medium voltage distribution systems and sizes electrical low voltage (600V) and medium voltage (15kV) and high voltage (115kV) equipment

Serves as the Engineer of Record for drawings, specifications and reports prepared under their direction

Performs field investigations, field inspections and witnesses start-up/acceptance testing activities

Works effectively in a collaborative environment with Architects, Mechanical Engineers, Civil Engineers and Structural Engineers on large multi-discipline projects

Coordinates with Mechanical, Fire, Architecture, Structural and Civil disciplines for comprehensive building design or modification.

Provide instruction on electrical drawing and using AutoCAD electrical

Work with PCB Fabrications houses to develop the stack-ups, dieletric materials, routing guidelines, and any Design For Manufacturing (DFM) suggestions

Write AFCEs

Determine project specifications

Compare equipment and select manufacturer

Work with on-shift maintenance personnel to find and fix problems on down equipment

Engineer solution to fix root cause and prevent recurring failures

Create and conduct training, if required, to prevent future downtime

Design equipment upgrades to optimize machine performance

Estimate total project costs and estimate project payback

Responsible for designing, testing, supporting, and troubleshooting components of low-voltage and medium-voltage electrical systems operating up to several megawatts

Develop system-level and/or physics-based models of components and devices in support of new technology development, project engineering, and test & evaluation

Develop and/or improve the test methods and procedures

Write test procedures and technical papers

Responsible for the design, analysis, and testing of advanced power electronic systems for both military and commercial applications

Will lead and direct small technical teams (engineers, designers and technicians) in solving complex problems

Responsible for writing requirements, specifications, and design reports

Act as an expert and advisor in power electronics engineering and electrical engineering area

Advises and directs the activities of assigned programs and/or projects to achieve technical objectives

Responsible for digital and analog design with power electronics emphasis and must be able to do system level design and analysis

Requirement:

Degree in Electrical and Electronics Engineering.

Knowledge of international codes & standards IEC, ANSI / IEEE

Significant experience in the power generation industry strongly desired

Prepare Electrical Engineering deliverables such as calculations, equipment specifications, datasheet

Working knowledge of “AutoCAD” or equivalent CAD system, MS Project, and MS Office

Track record of launching high volume electronics products, especially low power platforms

Knowledge of the PCB design process and tools experience with Cadence or Altium products

Proficiency with EE lab instruments and their use in verification and troubleshooting

Experience with ODM, JDM, or CM models of product development

Self-starter and creative problem-solver

5-DAYS WORK WEEK

• MAINTAIN PROPER RECORD OF ALL INCOMING AND OUTGOING GOODS
• PERFORM WAREHOUSE DUTIES SUCH AS LOADING, UNLOADING, PACKING, STOCK TAKE
• ASSIST TO CARRY OUT PERIODIC CYCLE COUNT AND STOCK TAKE
• OTHER AD HOC DUTIES ASSIGN BY SUPERVISOR
• EXPERIENCE & FORKLIFT LICENSE PREFERRED
• PHYSICALLY FIT

Bonus: Variable Bonus

A general labourer would usually complete tasks that do not require any specific knowledge or training – for example, cleaning up materials, performing manual labour, hanging signs or filing reports. The role normally works under a supervisor and general labourer tasks can often be physically demanding.

The role of a general foreman is to supervise the progress of the entire project. They communicate with management and hire or appoint individual foremen to ensure that the work meets quality expectations and deadlines.

• Position : Senior Quantity Surveyor (Construction/5 Days) - Up to $6,500
• Location : To Be Advised (Office located at Changi)
• Working hours : Monday to Friday | 8.30am to 6pm
• Salary (commensurate with experience) : Up to $6,500 + Performance Bonus + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Building & Construction

Main Responsibilities:

• Tender bid
• Post-Award Documents Preparation
• Carry out Quantity Take off for project which includes sourcing for suppliers and sub- contractors, collate price comparison and costing summary
• Prepare interim valuations pricing and Agreement of contract variations, progress claims and monitor project cash flow
• Assist in the settlement of the project final accounts with clients, suppliers and sub-contractors
• Attend meetings on site and with consultants
• Project budget and analyse the cash flow of the project
• Other duties as assigned

Requirements:

• Diploma/ Degree in Quantity Surveying/ Civil Engineering or equivalent
• Minimum 2-3 years of working experience as a Quantity Surveyor
• Good knowledge in Microsoft Word, Microsoft Excel etc
• Bilingual in English and Mandarin to communicate with Chinese Associates

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Responsibilities:

• Oversee and assure all tasks are completed strictly in compliance with the terms of the contract.
• Release work instructions customised for each project.
• Verify that the project is delivered according to the specified timeline.
• Manage and instruct staff members.
• Verify that all safety guidelines and directives are being followed.
• Report work progress and problems to the service manager or project manager.

Requirements:

• Diploma or Degree in Mechanical Engineering, Electrical engineering, or equivalent.
• A minimum of 2 years' experience installing ACMV systems.
• Strong leadership abilities.
• Effective communication abilities.

Interested candidates who wish to apply for the advertised position, please send in your latest resume to [email protected].

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

- Able to lead, manage & motivate a team of Female QC Inspector & Packers

- Assist in own department's manpower planning and deployment

- Assist in ensuring smooth running of departments operations of shift on duty

- Ensure effective implementation of working procedure in QC department

- Ensure efficient and effective communications inter and intra departments

- Look for customer complaint information

- Monitor and improve production yield (in term of inspection, unjig & smoothness of QC flow)

- work with production to ensure that customer delivery schedules and quality standard are met

Responsibilities:

• Lead and supervise the service-laying team working together with the primary project team and agencies, as well as settling disputes with others to create new projects and divert attention.
• Oversee the installation of manholes and underground ducts in new construction.
  and other services.
• Check coordination drawings, method statements, and other relevant construction documents.
• Assess submissions from third parties regarding the company services.
• Assist the maintenance and facilities teams with civil and structural challenges.
• Engage in a part in contract management and tendering.
• Any other responsibilities delegated by their superiors.

Requirements:

• Min Diploma or Bachelor’s Degree in Civil Engineering.
• At least 2-4 years of experience in Construction or Engineering.
• Prior experience in infrastructure projects and geotechnical aspects.
• Knowledge and understanding of specifications and contracts.
• Ability to read & interpret Engineering drawings and reports.
• Excellent knowledge of MS Office Applications.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1985234

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Key Responsibilities Include:

• Ensures prompt, efficient service, convey a positive image of self and company.
• Ensure opening/closing duties are done properly and on time.
• To assist, encourage and support the team member in the daily execution of their duties
• Monitor club operations that includes: Inventory, beverage service, cash transactions, comps and voids payment.
• Assisting the Operation Manager on team deployment, proper drink flow, sequence of service, quickly resolving any service disruptions or complaints for all shifts.
• Places priority on coaching and developing others, continually coaching new and existing team members to increase effectiveness by providing performance feedback to the team member.
• Monitors staff performance to identify training needs and potential for growth.
• Answer guests’ enquiries and make recommendations
• Perform any other duties as and when assigned.

You Should:

• Have experience in managing club and people for at least 2 years.
• Enjoy the hospitality and lifestyle scene, are immersed in it, believe in it and want to work to improve it – in short, you are here for the long run.
• Developed people’s skills, a positive problem solver with a can-do! attitude to it all. You genuinely care for your team and guest experience and spare no expense at getting the best for both.

Possess superior time management skills, are an effective communicator and enjoy working as a team.

Responsibilities:

• Ensure compliance with performance and procedures for M&E construction activities.
• Recommend improvements and corrective actions in M&E activities.
• Manage contractors for compliance with drawings, codes, standards, schedules, and budgets.
• Ensure quality and timely project delivery.
• Collaborate with draftsmen and subcontractors in design, supervision, and installation of mechanical systems.
• Oversee testing and commissioning of mechanical systems.
• Provide supervision and input on site logistics, installation, safety, subcontractors, quality, cost control, and reporting.
• Assist the Project Manager in developing construction policies.
• Ensure timely delivery and minimize project waste and manage project activities effectively.
• Coordinate with stakeholders to ensure smooth project operation.
• Collaborate with internal departments, authorities, clients, and suppliers.
• Assist in timely progress reporting to Management.
• Attend site meetings and ensure compliance with regulations and laws.
• Represent the company at site meetings with owners, consultants, and contractors.
• Monitor project progress and ensure adherence to safety, quality, and ISO standards.
• Optimize manpower allocation for productivity.

Requirements:

• Min Diploma in Mechanical Engineering
• At least 4 years of experience in related experience in the Construction Industry.
• Knowledgeable with Revit, MicroStation, AutoCAD, Primevera Software.
• Strong knowledge and experience of MS Excel.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us

Responsibilities:

• Lead the interior design team strategically to line with corporate objectives and customer needs.
• Acquire new clients and secure potential projects.
• Lead business development by identifying and developing new opportunities to grow the company's portfolio and market influence.
• Provide Interior Design project deliverables, including Concept Design and Construction Administration.
• Promote professional growth and skill development to team members by providing them with mentorship.
• Other ad hoc tasks as assigned.

Requirements:

• Degree in Interior Designer or Architecture or related field.
• At least 8 years of experience in a similar field with design leadership, project management and client servicing.
• Strong knowledge and understanding of the interior design industry.
• With decision making abilities and strong problem-solving skills.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to julie@talenttradersg.com

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Responsibilities:

• Deliver projects on time, within budget, and meeting agreed-upon success criteria.
• Develop and execute a comprehensive project work strategy.
• Identify and prioritize opportunities for process improvements and best practice sharing within the project team.
• Ensure project planning considers cross-program dependencies and facilitates the fulfillment of contractual obligations.
• Implement quality and efficiency improvement initiatives.
• Build and maintain strong client relationships, supporting effective delivery, performance measurement, and change management initiatives.
• Lead and manage the project team, including external suppliers, ensuring sufficient and skilled resources are available at all times.
• Foster a highly engaged team culture, inspiring them to achieve business objectives.
• Execute accident investigations as delegated.
  Ensuring to comply with company procedures regarding resource allocation, communication strategies, training, competency assessments.
  Ensure full adherence to safety, timeline, quality, and specification requirements for all projects, as directed.

Requirements:

• Min Diploma in Engineering related discipline.
• With 4+ years of relevant experience in LTA.
• Experience in Project & Construction Management. A&A experience is an advantage.
• Ability to lead and manage the team.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

location

5 work week

2400- 4000

Able to commit on weekends

Singaporean/Pr

• Oversee in the day-to-day operations of the restaurant
• Provide a high quality of service and deliver excellent dining experience to all the guests.
• Respond to customer complaints professionally and provide service recovery
• Ensure the quality is up to standard for all food served
• Gather feedback to improve the customer’s experience
• Any other duties assigned by the management from time to time

Responsibilities:

• Manage and oversee construction projects from start to finish.
• Coordinate and collaborate with project teams, subcontractors, and suppliers.
• Ensure compliance with safety regulations and procedures.
• Monitor and manage project progress according to schedules and budgets.
• Review and approve construction design drawings and specifications.
• Conduct regular inspections and quality control checks on construction activities.
• Resolve any issues or challenges that may arise during construction.
• Prepare and submit progress reports to project management.
• Ensure proper documentation and record-keeping of construction activities.

Requirements:

• Degree in Construction Management, Engineering or equivalent
• At least 5 – 8 years of experience in project engineering with supervisory background
• Prior experience in a construction industry is preferred

Interested candidates who wish to apply for the advertised position, please send in your latest resume to [email protected].

EA License No: 13C6305

Reg. No.: R1874608

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description:

• Prepare and analyze cost comparison
• Obtaining quotations, liaising and negotiate with sub-contractors and suppliers
• Responsible for measuring quantities and taking off
• Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments
• All other QS related job as assigned

Job Requirements:

• Min Degree / Diploma in QS / Building / Engineering or its equivalent
• Min 3 years and above QS experience in main-contractor companies in Singapore.
• Proven ability in contract negotiation, contract administration & variation orders
• Supporting VO, progress claim, contract administration and documentation for the project
• Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines

Roles & Responsibilities

Roles & Responsibilities

Responsibilities:

• Assit the GM & HR with administrative duties but not limited to photocopying, filing, data entries ect
• Maintain office documents and records
• Monitor, update of courses for foreign workers
• Verification of invoices from suppliers, contractors etc
• Maintain filing system
• Purchase of air ticket for repatriation of workers
• Manage workers dormitory
• Other ad-hoc duties and sales/initiatives assigned

Requirements:

• Min. Diploma
• Independent, disciplined and able to work under pressure
• Good communication & writing skills in English and Mandarin to liaise with China counterparts
• At least 2 year experience in administrative
• Must be computer literate with working knowledge of Microsoft Office Application
• Mandarin Speaking

Responsibilities:

• Carry out examinations, maintenance, and servicing on diverse material handling machinery at client locations.
• Perform customer assessments following task completion, document observations, and suggest safety-oriented corrective measures.
• Collaborate with sales associates to address customer service requirements, utilizing digital platforms for streamlined correspondence.
• Identify potential sales prospects and avenues for service enhancement.
• Compile and promptly submit accurate service documentation.
• Ensure the safe operation and maintenance of company assets and vehicles.
• Comply with safety protocols and promptly report identified hazards.
• Execute field tasks in line with Environmental, Health, and Safety (EHS) guidelines.

Requirements:

• Min NITEC in Mechanical or Electrical Engineering
• At least 2 years of relevant experience in the similar industry
• Proficient in MS Office applications
• With technical knowledge of material handling, construction or related.

Interested candidates who wish to apply for the advertised position, please click on the APPLYbutton below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description

• Prepare drawing based on engineer requirement and authorities requirement
• Drawings amendment and drafting in AutoCAD
• Must be able to travel to construction site to gather data and consult with builders and architects, to collect data regarding equipment or to other job site where CAD drawings will be used.
• Monitors compliance with building codes throughout the construction process.
• Reviews engineering data to ensure compliance with the original design plans.
• Ability to work effectively as part of a team or independently with minimal oversight.
• Explain drawing to construction teams and engineers to provide adjustments as necessary.

Requirements

• Min Degree in Building Management or Construction Management (Civil Engineering or equivalent)
• Good skills to run FEM analysis (e.g. Plaxis-2D or 3D) and calculate mechanics using Eurocode for ERSS & Pile design related to shallow/deep excavation
• Must be familiar with shop drawing

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or you can send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us

Responsibilities:

• Assist the managers with the daily operations management of the outlet.
• Assure that the needs of the guests are met and suggest the promotional goods to them.
• Liable for all cash quantities within the store in absence of the manager.
• Mentor and instruct both new hires and current employees to uphold company standards.
• In charge of opening and closing the outlet.
• Inform the manager of any problems with operations.
• In charge of the maintenance of the outlet
• In charge of inventory.
• Hiring and training employees.
• Overseeing employees and giving them advice.

Requirements:

• GCE ‘N’ or ‘O’ level
• At least 2-3 years of working experience in F&B.
• Ability to start work within short notice will be an added advantage

Interested candidates who wish to apply for the advertised position, please send in your resume to [email protected].

EA License No: 13C6305

Reg. No.: R24120209

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Job Description & Requirements

- Oversee all fabrications project and conduct quality inspection

- Inspect outgoing delivery, ensure finished fabricated products are packed readily and correctly before dispatch to site to avoid missed out items

- Oversee all fabrication workers, lead, train, mentor and develop workers

- Instill good quality control practices into fabrication process

- Provide Technical Advisory To Draftsment

- Check approved detail drawing, clarify with relevant draftmens if in doubts

- Well aware and control of inventory stocks level

~ Min 5 years experiences in Aluminium industry

~ Apply system index to manage production process flow.
~ Assist in implementation of improvement projects.
~ Develop and implement training plan for production staff.
~ Enforce practices of good safety culture and good manufacturing practices.
~ Ensure availability of resources to fulfill shipment and cycle time.
~ Ensure the robustness of processes with process control tools.
~ Highlight issues that affect output and operations.
~ Identify opportunity for continuous improvement projects.
~ Maintain good housekeeping in the production area.
~ Perform training for production staff.
~ Supervise manufacturing work for workplace safety and health compliance.
~ Supervise production operations.

Key Highlights

• Exposure in the government sector
• Location: Caldecott
• Working Hours: Mon- Fri (office hours)
• Duration: 12 months

Key Responsibilities

• Assist the team with administrative and data management tasks for the management of safety check service.
• Regularly upkeep of the central database (eg. Updating list new cases, status of safety check cases) and tracking the status of pending referrals from officers.
• Assist to track project KPIs and follow up safety check case updates
• To confirm accuracy of safety check case details and data extraction for the purpose of internal tracking and evaluation.

Requirements

• Min Deg. Diploma holders are encouraged to apply.
• Strong passion in social service and love to work with numbers.
• Proficient in Microsoft Office, especially Excel.

Interested candidates please click "Apply Now". We regret to inform you that only shortlisted candidates will be contacted for further discussion.

Chok Kah Hwa

Outsourcing Team

BGC Group Pte Ltd

EA Licence Number: 05C3053

• Position : Sales Executive/Engineer (Industrial/Construction Materials) - Up to $5,000 + Bonus
• Location : West - Tuas (Not required to report to office everyday)
• Working hours : Monday to Friday | 8.30am - 5.30pm
• Salary (commensurate with experience) : Up to $5,000 (based on experience & qualifications) +Average of 2 Months Bonus + Claimable Transport Expenses + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Piping

Main Responsibilities:

• To promote and sell company’s products and solutions based on company’s goal.
• Specifying of Company’s product to all customers (developers / architects / contractors / consultants / project owners)
• To provide quotations and ensure that delivery and technical support are provided on time to all customers.
• Support cross department activities and building good rapport in order to provide best products,
• solutions & services to customers.
• Work closely with the rest of sales team to achieve company monthly and annual target and objectives.
• Work closely and assist superiors to appoint, increase and define promotional activities for the distribution network.
• Analyses industry trends, conduct market research and feasibility studies of new products. Identify, propose and promote new products that has potential for Company.
• Any other ad-hoc duties deemed fit and necessary by the Supervisor/Manager

Requirements:

• Minimum of O' Level with 1year sales experience in construction materials.
• Candidates with own transport preferred.
• Bilingual in English and Mandarin to communicate with Associates who can only converse in Mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel for more job listings.

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684