Job Descriptions

• Actively conduct risk assessments at project site and recommend measures to minimize and eliminate possible risks to any person.
• Monitoring and verifying that the Environmental Management Plan (EMP) is adhered to at all times and taking action if the specifications are not followed.
• Keeping records of all activities/incidents concerning the environment on site and issuing of spot fines for transgression of activities identified in the EMP.
• Work closely with different teams to implement and maintain a strong safety regime on site.
• Conduct toolbox meeting and ensure the permit to work system in place.
• Work closely with different teams to implement and maintain a strong safety regime on site.vironment and practice of Company's QEHS Management System/WSH Act/Occupational safety and health at all times.
• Reporting to the WSH Manager, you will liaise closely with Project Managers on workplace safety, health and environmental issues to maintain a high level of safety at the sites.
• Ability to lead and advise on safety programs.
• Review and maintain site's WSH records.
• Other duties as assigned by management.

Job Requirements

• Degree in Safety, Health and Environment Management or other relevant subjects
• Holding Certificate in WSH Coordinator Course/ Building Construction Supervisors Safety Course and/or any Relevant Safety Certificates from any approved institutions will be preferred.
• Registered as Workplace Safety & Health Officer and Environmental Control Officer with at least five (5) years of post-registration and practical experience relevant to the scope of works of the contract.
• Good interpersonal skills.
• Ability to work under pressures in a fast pace environment.
• Working location at project site office, Pasir Ris.
• 5.5 working days
• Short notice period or can immediately onboard will be advantage.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Responsibilities:

• Report to the Project Manager and/or Asst. Project Manager.
• Overall in charge of site coordination.
• Lead a team of operation staff in daily operations.
• Manage and oversee the day-to-day construction activities of the project.
• Monitor and control the general workers' deployment on-site.
• Maintain site access throughout the construction period.
• Control and monitor work progress and resources.
• Monitor and control material wastage.
• In-depth understanding of project specifications, technical details, and construction drawings.
• Carry out work scheduling, material requisition planning, project coordination, and documentation.
• Ensure timely completion and good quality of works.
• Monitor Project's cost by taking proactive measures to prevent cost overruns.
• Other ad-hoc duties as assigned by the Immediate Supervisor/ Management.

Job Requirements:

• Five (5) years of working experience in construction industry.
• Degree in Civil Engineering or equivalent. Diploma holders or equivalent with relevant experience and proven track records will also be considered.
• Independent, diligent, meticulous and highly motivated with excellent team spirit.

Key Responsibilities:

• Download bank statements.
• Record and update cash books.
• Coordinate, check, and prepare site claims.
• Maintain subcontractors’ payment lists for the Contracts department.
• Prepare payments according to payment schedules and credit terms.
• Liaise with banks for administrative tasks and online applications.
• Perform other assignments, projects, and analyses as required.

Requirements:

• Diploma or higher qualification in Accounting.
• Minimum of 1 year of post-qualification experience, preferably in the construction industry.
• Proficiency in UBS accounting software and strong Microsoft Office skills.
• Good analytical and problem-solving skills; able to work independently under tight deadlines.

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues.
• Production and maintaining of drawings from BIM (Revit) model and ensure proper transmission of data to all parties involved.
• Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Transform AutoCAD drawings into 3D drawings.
• Ensure BIM standards and Level of Development (LOD) are followed.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description:

• Quantity take off and cost estimation based on technical details, drawings, and specifications
• Sourcing out of quotations from suppliers and subcontractors
• Evaluation of supplier and subcontractor's quotations for recommendation of competitive prices
• Assist in the preparation and submission of tender and contract documents
• Preparation and submission of progress payment claims and variation orders
• Attendance of site meeting and liaise with the cost consultant
• Measure and value the work done on site
• Evaluation and certification of supplier and subcontractor's claims
• Finalization and closing out of project accounts
• Estimation of quantities, evaluation and cost comparison of sub-contractors quotations
• Reply to sales enquiry
• Prepare and follow up sales quotation
• Prepare project subcontract
• Prepare bills of quantities and other documentation
• To approve sub-contractors’ claims for job done as per site status
• To establish progress claims as per site status and obtain client agreement for billing

Job Requirement:

• Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Quantity Surveying
• At least 5 Year(s) of working experience in Singapore related field.
• Preferably Executive specialized in Engineering - Civil/Construction/Structural or equivalent.
• Looking for meticulous, committed, proactive and creative thinker candidate.
• Possess sense of urgency.
• Good communication and presentation skill.
• Able to work independantly with minimun supervison.
• workplace: Woodlands

Job Responsibilities:

• Report to the Project Manager and/or Asst. Project Manager.
• Overall in charge of site coordination.
• Lead a team of operation staff in daily operations.
• Manage and oversee the day-to-day construction activities of the project.
• Monitor and control the general workers' deployment on-site.
• Maintain site access throughout the construction period.
• Control and monitor work progress and resources.
• Monitor and control material wastage.
• In-depth understanding of project specifications, technical details, and construction drawings.
• Carry out work scheduling, material requisition planning, project coordination, and documentation.
• Ensure timely completion and good quality of works.
• Monitor Project's cost by taking proactive measures to prevent cost overruns.
• Other ad-hoc duties as assigned by the Immediate Supervisor/ Management.

Job Requirements:

• Five (5) years of working experience in construction industry.
• Degree in Civil Engineering or equivalent. Diploma holders or equivalent with relevant experience and proven track records will also be considered.
• Independent, diligent, meticulous and highly motivated with excellent team spirit.

Responsibilities:

• Accountable to maintain & monitor the schedule of equipment’s’ renewal as to fulfil the statutory requirements (e.g. Lifting gear)
• Responsible to raise the departmental purchase requisition for approval
• Handle and coordinates on the incoming and outgoing invoices and delivery orders
• Work with Logistic Assistant to cross check and confirm on the machinery movement for billing
• Perform data entry and ensure on the accuracy
• Maintain appropriate filling of documentations for easier retrieval
• Ensure the practices and procedures meet legal guidelines, and health and safety requirements
• Ensure safety practices and housekeeping are maintained to the highest standard
• Any other ad-hoc duties as and when assigned

Requirement:

• Diploma in Supply Chain Management / Business Administration or any other relevant field of studies
• 1 years relevant experience
• Computer skills and Microsoft Office

Other Information:

• Working hour: 5 days work week
• Company transport provided

Responsibilities

- Respond to incoming and outgoing correspondence

- Proper record keeping and filing of documents

- Application, renewal, cancellation of work permit/employment pass via MOM website, security bond for foreign workers

- Proper record of attendance, medical leave, home leave for foreign workers

- Preparation of documents for renewal of certificates, permits

- Proper documentation of dormitory records

- Provide administrative support to the team

- Performing other duties requested by supervisors

Requirements

- Proficient in Microsoft Office

- Good communication and interpersonal skills

• Up to date knowledge of market price trends.
• Ability to administrate on ACMV / tender and tendering procedures.
• Good strategies, planning and control of all tendering activities.
• List the scope of work and commercial requirements in order to determine the risks of the projects.
• Prepare and follow up on the Request For Quotations to suppliers / sub-cons in order to ensure tender costing and technical data to be submitted on time.
• Take off Bill of Quantities from the ACMV Drawings, Points of Schedules and Architectural drawings.
• Collate price comparison, costing summary and technical proposal in order to prepare tender submission.
• Study the addendum and / or corrigendum documents and update costing summary with technical proposal accordingly.
• Maintain relevant documentation in an orderly and proper manner.
• Attend site briefing / site meeting / post tender interview when necessary.

JOB DESCRIPTION

• Plan and execute short- and long-term activities to achieve Company objectives.
• Develop and maintain relationship with clients and stakeholders.
• Developing goals for the team and business growth and ensuring they are met.
• Collaborating with management on sales goals, planning, and forecasting; maintaining short- and long-term business development plans.
• Assisting in due diligence reviews for prospective new property acquisition(s).
• Liaise with Beijing HQ effectively, take charge of processing of incoming correspondences, distribution, follow-up, and response.
• Preparing the important reports to Beijing HQ, including annual operations review, performance appraisal reports etc.

Skills and Specifications

• Degree in any discipline, background with construction management, business administrations or real estate is an advantage.
• Good command of both English and Chinese is a must, with excellent proficiency in written Chinese (In order to liaise with the Chinese speaking associates)
• At least of 10 year of related working experience
• Good communication and presentation skills
• Multi-tasking ability, resourceful and creative

Job Description

a) Report to the Project Manager. Responsible for the EHS systems and implementations.

b) The detailed duties and responsibilities includes but not limited to the following:

• Assist and advise the Project Manager on EHS planning for overall project scope and detailed activities.
• Study and fully understand the requirements of company ISO, EHS and sub-contracts agreements.
• Liaise, handle and keep proper records in dealing with all related authorities in complying with their respective requirements.
• Conduct regular site audits to ensure compliance with EHS requirements. He is authorized to take necessary actions including issuance of partial stop work order as he and the Project Manager deem fit.
• Handle all accident and incident reports.
• Work as a team with project team members and sub-contractors to provide a safe working environment.
• Prevention of fines, imposition of demerit points and SWO from the authorities or owners like MOM, NEA and HDB is a key role which is also a key performance measurement of WSHO cum ECO.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Certified NEA, ECO, ECO, ECMO
• At least 3-5 years' on-site experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

ECO cum WSH Coordinator

Job Description

i) To work with the PM to comply with environmental, health & safety (EHS) laws laws, advise PM on environmental remediation measures, carry out site inspections and to engage workers and stakeholders on maintaining good environmental health standards

ii) Work with the PM to draw up, implement and monitor effective environmental management plans, including reviewing them when necessary:

· Prepare & submit to the PM the Site Environmental Control Programme before work commences at the worksite.

· Prepare & submit to the PM the Site Environmental Control Report once every two weeks.

iii) Inspect the construction site to ensure all facilities, equipment and operations do not pose any environmental health hazard;

iv) Inspect the on-site canteen, worker’s quarters, if any, and dining areas to ensure that good hygiene practices are being observed, and the areas are well maintained with good housekeeping.

v) Identify and discuss environmental health irregularities or potential lapses with the PM, and recommend corresponding measures to prevent or rectify such concerns;

vi) Attend to all feedback on any irregularities and inform the PM accordingly;

vii) Assist the authorities to investigate outbreaks of infectious, vector-borne or food-borne diseases at the construction site; and

viii) Organise campaigns, training courses and other activities, where required, to develop and sustain the interest of workers in maintaining good environmental health standards.

ix) Conduct inspection of the ECM at the worksite in accordance to ECM plan

x) Maintain records of all inspections.

xi) Advice the PM & project team members on the implementation of the EHSMS & implement the EHSMS.

xii) Assist the PM identify any unsafe work condition or unsafe work practice which is carried out in the worksite;

xiii) Recommend to the PM to implement such reasonably practicable measures to remedy the unsafe work condition or unsafe work practice;

xiv) Assist the PM implement such reasonably practicable measures referred to in (xiii) or safe work procedures.

xv) Advice the PM & the project team members on the implementation of the EHSMS.

xvi) Implement the EHSMS.

xvii) Stop the work or recommend to the PM / WSHO to stop the work if it is deem not safe for the work to continue.

xviii) Inform the higher level of management (e.g. Project Director) if conflict between EHS issues & operational considerations at the worksite cannot be effectively resolved.

xix) Report to PM

xx) Perform any duties assigned by PM.

Job Requirements

• Registered ECO by NEA
• Diploma in Public Health
• WSQ Advanced Certificate in Workplace Safety and Health
• Min 3 years of experience in the building & construction industry

Job Description

• Review and approve construction drawings, specifications, and designs to ensure that they meet project requirements and industry standards.
• Ensure that projects are delivered on time, on budget and to the prescribed standards.
• Communicates effectively with project teams, consultants and subcontractors to identify needs and evaluate alternative Project solutions.
• Attend meetings as required to ensure the compliance with the overall project standards, procedures requirements and resolved issued.
• Assist in selection of quality subcontractors, suppliers and vendors in the negotiation of their terms and conditions of engagement with the Procurement team.
• Regularly inspect the site progress and provide guidance to the project and construction management teams on best practices and efficiencies on scheduling and processes.
• Review and endorse subcontract documents, progress & variation works claims to customers.

Requirements:

• must have Degree in Civil Engineering with related.
• At least 5 years of relevant working experience at managerial level in the Civil / Building/ Construction Industry.
• Strong communication skills, as well as the ability to visualize issues and effectively communicate with others.
• Outstanding organization, coordination and leadership skills. Excellence in verbal and oral communication skills.

Job Description:

• Prepare and analyze cost comparison

• Obtaining quotations, liaising and negotiate with sub-contractors and suppliers

• Responsible for measuring quantities and taking off

• Prepare Variation Orders, claims, final accounts, settlement and sub-contractor payments

• All other QS related job

Job Requirements:

• Diploma in Building or its equivalent

• 3 years and above experience as QS in construction companies

• Proven ability in contract negotiation, contract administration & variation orders

• Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive & able to meet tight deadlines

• AutoCAD is a must

• 5.5 days work week

Responsibilities:

• Safely transporting workers as well as various products and materials to and from specified locations in a timely manner.

• Assisting with the loading and offloading of products and materials.

• Ensuring that the company vehicle is always parked in areas that permit parking in order to avoid towing.

• Keeping the company vehicle clean and properly maintained by performing regular washing, cleaning and vehicle maintenance.

Requirements:

• Must have Singapore Class 4 driving license.

• Clean driving record.

• More than 2 years experience in driving.

• Sound knowledge of road safety regulations.

• Working knowledge of local roads and routes.

• Effective communication skills.

• Punctual and reliable.

• 6 days per week

Job Description

a) Report to the Manager/Team leader as shown in the organization chart. Responsible for the coordination and control of technical matters, quality implementation and site supervision works.

b) The detailed duties and responsibilities includes but not limited to the following:

• Coordinate with all the parties including sub-contractors and consultants to solve and coordinate technical issues, production of drawings and ensure proper transmission of data to all parties involved. Ensure that the detailed schedules of drawing production and site progress are met.
• For quality management, the coordinator is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Supervise site works according to the quality and EHS requirements.
• Handle all inspections and handing over process with the final objective of achieving customer satisfaction and high Conquas/QM score.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Degree in Architecture / Engineering
• Minimum 2-3 years' experience in BIM Drafting (Architectural or M&E)

Job Description

• Supervise and lead the construction team to lay down construction milestone.
• Manage construction activities, ensuring timely and smooth progress of the operations.
• Responsible for implementing the work plan and attending project meetings
• Resolve design site problems encountered during the construction period.
• Producing site progress report to management.
• Monitor and ensure subcontractors comply with specified requirements.
• Identify and comply with all applicable statutory/ regulatory requirements related to project.
• Coordination and sequencing of works of different subcontractors.
• Identify possible risks to project and stakeholders as well as create contingency plans to mitigate these risks.
• Respond swiftly to work delays, emergencies and other problems.
• Clear communication to external parties including client, subcontractors, consultant, vendor etc on project needs, requirements and schedule by means of daily construction oversight.

Job Requirements:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• At least 10-15 Year(s) of working experience in the related field is required for this position.

Job Scope

· Process payroll transaction, calculate staff & general worker’s overtime, and CPF submission.

· Maintain employee annual leave database and process petty cash.

· Prepare employment contracts, KETS (for staff), letters of appointment, and confirmation/ termination letter.

· Prepare job description, post job ads and source for suitable candidates.

· Proper filling for all the invoices and payment vouchers.

· Submission of year-end IR8A and IR21.

· Updating MOM Labour Survey and Occupational Employment Dataset (OED).

· Assist in ISO & GGBS Renewal & Surveillance Audit, BCA registration renewal, GeBiz renewal and BizSafe Renewal.

· Submission of application/ renewal for the Contractor Registration and Builder License under eBACS.

· Compile the relevant business documentation used in banking process.

· Maintain accurate financial records and statements.

· Record transactions and events relating to sales, purchases, receivables, payables and cash.

· Issuing and process payment vouchers

· Preparation and monitor weekly/ daily cash flow.

· Coordinate and liaise with insurance for Performance Bond / Advance Payment Bond matters.

· Coordinate and liaise with insurance agent for Foreign Workers Hospitalisation Insurance renewal, WICA renewal and Machinery Insurance.

· Coordinate with valuer for the machinery valuation matter.

· Perform ad-hoc duties as assigned.

Requirement

*Education: A certificate, diploma, or higher qualification in accounting, administration, or a related field

*Skills: Proficiency in Microsoft Office and the internet, and the ability to use accounting software like MYOB

*Experience: At least two years of relevant work experience

*Language: Proficiency in writing and speaking English

*Other skills: Ability to multitask

Roles & Responsibilities:

• Prepares, develops, finalises, effects, modifies and monitors the long term, short term, annual and periodic budgets and plans for the organisation. Update Owners about their progress and provides logical and rational explanation for variations in their achievement.
• Controls the operations of the organisation including financial, engineering, procurement and administration by providing management support and direction to departmental heads and their respective teams. =
• Responsible to ensure the development, enforcement, maintenance and updating of suitable systems, policies and procedures within the organisation, in order for the company to carry on its activities smoothly. Coordinates, reviews and approves the preparation of policy manuals, safety standards and quality guidelines and ensures the adherence of company employees to these documents.
• Responsible to ensure the profitability of the company and return on investment for the owner/partner. Approves the pricing for tenders/projects, ensures that project expenses are well within the contract price and monitors the income and expenditure of the company for budget compliance and cost control. Performs regular analysis on the fiscal health of the organisation, takes suitable remedial measures if required, and re-orients the organisation towards financial sustenance.
• Maintains relationship with old and existing clients/consultants/contractors/sub-contractors with regular follow up meetings and sources new clients by applying a focussed marketing approach. Presents the company and its activities to clients, pre-qualifies, tenders, negotiates and finalises new projects for the company to execute.
• Responsible for the recruitment of qualified, skilled and experienced personnel and their termination. Monitors employee productivity and performance in a periodical manner and ensures the provision of professional and personal growth opportunities. Provides motivation, leadership initiative, guidance to the employees and ensures the maintenance of high morale within the company. Ensures the application of fair, ethical and nondiscriminatory employment practices and provides an equal employment opportunity environment within the organisation.
• Assesses and evaluates market conditions, trends, associated risks and sets out suitable solutions to overcome downturns, crises and abnormalities. Continuously identifies and develops opportunities for the company to expand its products, services, functions and area of operation
• Performs other duties as assigned by the Owner.

Requirements:

• Graduation from a four-year college or university with a degree in civil engineering, or closely related field
• A minimum of eight years specific experience including multiple projects management in engineering, construction management or in a closely related field of building structures.
• At least two years responsibility in an operational role covering responsibilities of estimation, planning, purchase, project management, accounting departments/individuals. Previous experience or close association in a role with full operational responsibility in a construction environment.

Job Descriptions

• Review, update and coordinate all architectural work including shop drawings for the project.
• Liaise, supervise and coordinate with sub-contractors and vendors on projects and work.
• Ensure compliance with Architectural specifications and achieve quality aspect of architectural works.
• Coordinate with architect, structural engineer and M&E engineer to resolve construction problems and issues.
• Carry out architectural works scheduling, material requisition, cost control, project supervision and documentation.
• To attend to construction site coordination works and meeting.
• Review project specifications, tender clarifications and construction drawings
• Carry out daily supervision and coordination of all architectural implementations at site.
• Prepare any necessary construction method statement and technical proposal to ensure smooth transition of works.
• Assist the Project Management team in ensuring that the works are carried out to schedule and in accordance with relevant regulations.
• Coordinate all architectural drawings and works, submit and update status of shop drawings and materials as well as supervise work progress.
• Performs other duties as assigned.

Requirements

• Degree/ Diploma in Architecture or its equivalent
• Minimum 3 years and above of relevant site experience in building projects
• Ability to interpret construction drawings for any discrepancies.
• Familiar with local standard quality implementation, BCA CONQUAS and other Quality Mark Assessment
• Candidate who possesses good experience and exposure will be considered higher position. Salary will be commeasured according to skill

Responsibilities:

• Oversee and effectively maintain the M&E systems and supervise the M&E team in carrying out duties

• Ensure all projects, preventive maintenance works and SOPs are carried out in excellent quality within the schedule timeline and budget

• Perform site planning, coordination and inspection that related to M&E and facilities

• Oversee and effectively maintain the M&E systems. Analyse faults speedily and recommend holistic, sustainable and cost-effective solutions to the client

• Ensure accurate records and progress reports is prepared on timely manner

• Ensure proper arrangement of site organization and workforce management

• Conduct regular meetings with teams, clients, consultants and subcontractors

• Liaise with the equipment vendors at a technical and professional manner so that equipment faults escalation can be resolved within the shortest possible time

• Ensure the operation teams comply with client & regulatory requirements.

• Any other ad-hoc duties as assigned

Requirements:

• At least 7 years of experience in related ACMV, and Electrical or equivalent.

• Minimum Diploma/Degree holder in Mechanical Engineering, Electrical Engineering, ACMV or equivalent.

• Possess strong analytical and organizational skills with the ability to work independently

• Proficiency in MS Office.

• Ability to work under pressure in a complex environment.

Job Description:

• Competent in reading and understanding drawings and perform measurements.
• Competent in preparing Bills of Quantities.
• Competent in understanding tender/contract/document/specifications/terms of contract
• Competent in analysing quotations/prices/rates, build-up rates and perform pricing
• Competent in performing contract administration including but not limiting to valuation of payments and variations claims in accordance to contract requirements
• Competent in performing all tender activities necessary for the procurement of new projects
• Competent in performing any other activities in connection with the businesses of the holding company
• Competent in working independently as well as with a team
• Participate in any activity ancillary to the company's other objectives e.g. charity events
• Competent in completing required obligations within stipulated timings and other constraints

Job Requirements:

• Bachelor's Degree in Quantity Surveying
• Minimum 3 years of working experience, preferably in the construction industry
• Proficient in Microsoft Office Tools