Requirements

• Candidate must possess at least Professional Certificate in Engineering (Environmental/Health/Safety) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Non-Executive specialized in Engineering - Environmental/Health/Safety or equivalent.

Responsibilities

The role of an Environmental Control Officer (ECO) is basically to look out for conditions/ situations in construction sites which cause environmental health problems or are likely to cause environmental health problems. He should report these conditions/ situations to the contractor together with recommendations on remedial measures to be taken to prevent recurrence.

The main areas where the ECO should pay attention to are as follows:

• Disease-bearing insects and rodents
• Proper disposal of construction waste
• Noise, air and dust pollution
• Earth littering
• Siltation of drains
• Food hygiene in canteens
• Any other environmental health matters

- To carry out rodent treatment at town council estate .

- To performs any other related duties as instructed by the immediate superior

- With / without experience are welcome to apply , training will be provided .Retiree are welcome .

- Able to read / write / speak in simple English

- Physically Fit

- work week : 5.5 days

Your Role

• Perform checks on the structural, architectural and M&E materials/works to ensure that the final touch-up works are ready for inspections
• Monitor the performance of subcontractor workers for all trades and ensure any defects are properly rectified
• To participate, work closely and give support to safety personnel at site on all initiatives/ matters relating to Safety and Health
• To comply with the Company Safety Management System and the WSHA and its subsidiary legislation

The Requirements

• Possess a Degree in Civil Engineering or its equivalent
• Minimum 3-5 years of relevant working experience in construction industry
• Must be technically inclined and possesses excellent problem-solving
• Be able to work independently as well as acquiring good interpersonal skills to coordinate between the various disciplines and construction teams

Requirements

• Candidate must possess at least Professional Certificate in Engineering (Environmental/Health/Safety) or equivalent.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Non-Executive specialized in Engineering - Environmental/Health/Safety or equivalent.

Responsibilities

The role of an Environmental Control Officer (ECO) is basically to look out for conditions/ situations in construction sites which cause environmental health problems or are likely to cause environmental health problems. He should report these conditions/ situations to the contractor together with recommendations on remedial measures to be taken to prevent recurrence.

The main areas where the ECO should pay attention to are as follows:

• Disease-bearing insects and rodents
• Proper disposal of construction waste
• Noise, air and dust pollution
• Earth littering
• Siltation of drains
• Food hygiene in canteens
• Any other environmental health matters

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Function
1. Liaise with Front office and instructing panel valuer to conduct desktop/ formal valuation and issue valuation report.
2. Review valuation reports for completeness, accuracy and quality. Address comments / issues raised with internal stakeholders and valuer.
3. Attend to emails received through the team’s Functional Mailbox and assist with Credit administration.
4. Assess valuers' performance and provide feedback to Policy team.

Accountability
1. Deliver quality services to Business units by adopting a systematic and consistent approach in line with the Bank’s credit policies and procedures.
2. Achieve and adhere to specified performance standards in turnaround time and accuracy.

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Control (Software) Design Engineer / PLC Programmer
• Working Location: Pioneer (Close to Joo Koon MRT)
• Working Hours: 5 days (Mon – Fri, 9am – 6.00pm)
• Salary Package: Up to $3,000 + AWS + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Project Management including scheduling, Budget control & other project related matters
• Responsible for hardware and software (PLC) design for customized machine / total system
• To supervise, test and commission projects both in Singapore and/or to overseas
• Project presentation & documentation
• To work with third party engagement wherever necessary for project related matters

APPLY NOW!!!

• Diploma / Degree
• Experience in project management, especially with PLC design and implementation, is preferred.
• Good organizational and communication abilities to handle diverse project aspects.
• Willingness to travel for project supervision and commissioning.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70912 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description:

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions.
• Carry out ad-hoc duties as assigned, when and where necessary.

Job Requirements:

• Minimum Diploma or Degree in Chemistry, Food Science and Technology, Analytical Chemistry or equivalent in years of similar experience.

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Well Established Medical Devices Manufacturing Company
• Basic $2200 - $3000 + OT + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working hours: 12 Hours Shift

Job Responsibilities:

• Carry out inspection of incoming materials and finished products according to operational instructions to ensure that materials or products meet the requirements
• Ensure product identification is correct and stored in the correct location, maintenance of inspection equipment and daily monitoring of production environment
• Statistics on the quality status of incoming materials and processes and the quality of shipped products
• Report abnormalities to superior in timely manner and inform relevant departments and track the improvement status of non-conformities
• Assist in customer complaint analysis and take corresponding improvement measures
• Ensure records comply with good writing practice GDP requirements
• Assist the superior to complete other tasks

Job Requirements:

• At least 1 year of quality management experience and basic computer software
• Blueprint reading capabilities, and ability to use measuring devices like gauges, meters, calipers

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

About our client: Our client is a leading international engineering consultancy.

*Please note that this role will be hired on a contract basis and will be seconded to our client's project*

Work Location: Tuas (company transport is provided in selected MRT stations)

Working days: 5.5 days

About the role:

The Lead Resident Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large-scale power generation project. The Engineer shall have at least 10 years of relevant engineering experience in delivery of large-scale industrial/ utilities projects (e.g. waste, water, oil & gas, power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

· To work as owner’s engineer to lead the ICA project implementation at site.

· Assist Chief Resident Engineer in daily supervision and coordination duties for ICA discipline.

· Project delivery planning including time and manpower scheduling.

· Source and interview for Resident Engineers and Resident Technical Officers for ICA discipline

· Strong capability of specification capability for all ICA-related specification. e.g. DCS / PLC system configuration, topology and controller, RIO engineering.

· Enforce Specifications, International Standards, Singapore Standards and good practices

· In-depth of understanding for automation package for contract implementation of automation systems for WtE project.

· Contracts management of ICA discipline for the WtE project

· Review the EICA submittals from Contractors for Process like Waste Reception system, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, Communication Network Infrastructure, DCS, PLC, EMIS, PFMS etc.

· Essential understanding of P&ID of process engineering

· Liase with the Engineering Manager and the Project Technical Specialists on the review and approval of design submissions including calculations and drawings

· Engage in Technical discussion EICA related issues with the contractor and client

· Attend site meetings and resolve technical issues with Contractors

· Define Inspection and Special testing requirements and ensure coordination of those efforts on all contracts

· Ensure the documentation fully complies with the specifications and standards

· Participate in HAZOP review, SIL safety and design for safety workshops

· Work with electrical team closely for all power and process interfaces

· Participation in FAT of automation equipment, DCS, PMS, PLC and RIO

· Provide Technical support in Testing and Commissioning of the plant.

About you:

· Degree in Electrical / Electronic/Instrumentation & Control Engineering recognized by the Professional Engineers Board

· Registered as Resident Engineer with the Joint Accreditation Committee of the Institution of Engineers Singapore / Association of Consulting Engineers Singapore

· At least 10 years of relevant experience in design and construction of large Waste-to-Energy (WTE) projects or waste/water management projects in Singapore, particularly experience in power plant or WTE processes.

*Please note that only shortlisted candidates will be contacted.

EA Name: Kingsforce Management Services Pte. Ltd.

EA Licence Number: 94C3545

EA Personnel Name: Paola Jane Ofrasio Fajardo

EAP Personnel Registration Number: R1325507

Our Client is a leader in the Energy Manufacturing industry in Singapore. Due to their current expansion plan, they are looking for an Control and Instrumentation Officer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities

• Ensure maintenance work is carried out effectively, efficiently, and in compliance with safety and regulatory requirements.
• Respond to and address plant failures and forced outages promptly to ensure timely and proper rectification and restoration.
• Plan and ensure the safe and timely execution of plant overhaul activities.
• Recommend and implement plans for modifications, upgrades, and installations of plant systems and equipment to enhance performance, availability, and reliability.
• Manage the procurement of parts and services to meet maintenance needs, including spare parts and external services for routine and breakdown maintenance.
• Lead and manage a team of technical officers and technicians.
• Any ad-hoc duty as given

Requirement

• Min Degree in Electronic & Electrical Engineering or equivalent
• Min 3 years’ experience in Control and Instrumentation Engineering
• Good knowledge in Control and Instrumentation and good working knowledge of safety

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21103987 (Yan Yongmao)

Are you a data professional with a passion for new technology and data governance trends? Do you understand the challenges of managing data at an enterprise scale? Are you excited about enabling data and analytics users by providing self-serve product-centric capabilities? If so, we invite you to join our team and help design and build our company's innovative data-driven future. As the Technical Lead for Enterprise Data Access Control, you will oversee all technical aspects of the design and development of EDAC, our self-service data access control product.

Responsibilities

• Oversee all technical aspects of the design and development of EDAC, our self-service data access control product.
• Lead a team of experienced data engineers and developers, working with the Product Manager and other product teams integrated in the EDE Product Line.
• Form a close relationship with technology vendors of industry-leading data products and help shape and deliver our product roadmap.
• Participate in new technology evaluations to identify opportunities and estimate effort to support the product roadmap with new tools.
• Manage the development team, working closely with the Scrum Master, the Product Manager, the Solution Architect, and other product teams in the product line.
• Run an agile delivery team, clarify requirements, design features, assign tasks in JIRA, support developers, produce and track estimates, oversee the development lifecycle and documentation, and escalate issues to the Product Manager or the Solution Architect as needed.
• Liaise with support and maintenance teams and infrastructure teams providing services to host your product.
• Work closely with key technology and service partners to ensure their products are correctly configured and delivering to help our product roadmap.

Qualifications

Required

• Bachelor’s degree in computer science, Information Technology, or related field.
• 8+ years of experience in software/data engineering and architecture.
• 5+ years of experience in data and analytics delivery initiatives.
• Ability to work in a fast-paced environment, driving results while collaborating with multiple simultaneous projects.
• Ability to work collaboratively with global teams across multiple departments, including offshore teams operating in different time zones.
• Proven track record of delivering projects on time and within budget.

Preferred

• Understanding of data or related trends such as Data Fabric, Data Mesh, Zero Trust, Data-as-a-Product, data ownership, and governance strategies.
• Knowledge of the AWS cloud ecosystem from a data and analytics standpoint, including a working knowledge of devops.
• Knowledge or experience of industry data access control products such as Immuta, Okera, Privacera, Apache Ranger, Security.ai, Cyral, Axiomatics etc.
• Knowledge of Enterprise metadata catalog tools such as Collibra, Amazon Glue, Informatica, Alation, Apache Atlas, Zaloni, etc.
• Data layer tools such as Databricks, Starburst Trino, Amazon Redshift, dbt, Matillion.
• Understanding of AI & Machine learning life cycle management and AI/ML model life cycle, tools like Amazon Sagemaker, DataRobot, Dataiku.

Responsibilities:

• Supervise the Service Delivery Managers and other resources within the security services team
• Prepare and deliver the service and maintenance proposal during bids
• Formalize service requirements, cost of ownership and integrated logistic support of the Solution
• Define the architecture/organization of the service and the associated service infrastructure
• Allocate service requirements to the various actors of the organization for support
• Validate the Service Deployment Readiness
• Validate the Obsolescence Management Plan
• Responsible for the resources to deliver the services
• Ensure that the teams meet all the Service Level Agreement (SLA)

Requirements:

• A bachelor's degree in IT/Computer/Engineering Discipline
• Preferably more than 10 years of work experience in maintenance of Critical System with SLA in the management capacity
• Experience in execution of ITSM processes in an organization
• Experience in operation transition planning from project phase into maintenance phase
• Experience in managing a group of more than 20 service support staffs and sub-contractors
• Experience in delivering ILS requirements in project phase
• Good understanding of Logistic Support Analysis such as Maintenance Engineering Analysis (MEA) and Level of Repair Analysis (LORA)
• Good understanding of System Reliability, Availability and Maintainability (RAM) programme
• Experience in the System Testing, Commissioning and Warranty support
• Strong interpersonal skills, ability to effectively communicate with peers and customers on all levels
• Ability to effectively prioritize and execute tasks in an occasionally high-pressure environment
• Organized and motivated individual with good written and oral communication skills
• Good technical knowledge of Windows Server, Linux, VMware, Databases, Storage, Networking, Cybersecurity, Communication Systems will be an advantage
• Any professional certifications such as PMP/IPMA, ITIL, CCNA, etc. will be also an advantage

Job Responsibilities & Requirements

Job Responsibilities:

• Report to the Merchandising Division.
• To be responsible for the overall stock control, ensure efficient system and delivery solutions
• To manage all incoming and outgoing stock in the warehouse.
• Monitor stock levels and ensure inventory accuracy
• Perform regular cycle counts and reconcile discrepancies
• Oversee the maintenance and organization of the stockroom
• Train and supervise stockroom personnel
• To generate and analyse stock/inventory reports
• Monitor stock levels for re-stocking purposes
• To develop and implement policies and procedures
• To work closely with HQ, EC, Store Operations and Warehouse and to ensure stock/inventory efficiency
• Any other job tasks required by the reporting Manager

Requirements:

• Minimum Degree in related disciplines
• Possess strong leadership with good planning and organization skills
• Possess good ability to demonstrate problem solving and analytical skills with pro-active approach
• Preferably with 3 years of relevant/retail industry experience.
• Ability to speak Japanese will be preferred
• To work closely with HQ, EC, Store Operations and Warehouse and to ensure stock/inventory efficiency
• Any other job tasks required by the reporting Manager

Staff Benefits:

• Birthday Leave
• Employee Discount
• Optical/ Dental Claim
• Career Progression

**We regret that only shortlisted candidates will be notified.

About MUJI

Lower priced for a reason.” This phrase encapsulates how MUJI first began in 1980. We launched products that might almost be regarded as substandard if based on traditional criteria. Focusing on our three priorities of “selection of materials,” “streamlining of processes,” and “simplification of packages,” we have grown into a brand with over 7,000 no-frills quality products.
This site introduces MUJI from various perspectives such as “Message from MUJI” “Products and Services” “Stores” and “MUJI's Expanding Activities.

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Ensure On-boarding KYC, KYC on customers’ account maintenance and periodic. KYC review documents are appropriate, sufficient and the completeness of customers’ documents are in accordance to the AML standard set by the bank.

• Perform validation on transaction reviews and be able to identify any

abnormal transactions during KYC review.

• Ensure proper tracking and documentation of all KYCs conducted for

customers and reviews are completed timely as per AML requirements.

• Partner with Business unit and work closely with Compliance when

performing due diligence checks on customers.

• Initiate STR filing if any suspicious activity is uncovered during KYC

checking and reviewing on a timely basis.

• Organize regular AML training for business units to promote compliance awareness and updates on regulatory requirements

• Assist to streamline KYC processes and propose solutions to LCD for future revisions.

• Other ad-hoc duties as assigned by Management.

Job Requirements

• At least 3 years of relevant working experience in the AML/KYC/CDD related functions in Corporate Banking / Commercial Banking.

• Keep a good in-depth knowledge and understanding of current AML/CFT regulation and KYC procedures.

• Self-motivated, meticulous and able to multi-task.

• Possess good communication and interpersonal skills.

• Computer literacy essential in Microsoft Word and Excel.

• Able to work both independently and as a team

• Effectively bilingual in English and Chinese language both in spoken and written form so as to communicate with Chinese counterparts.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)