Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

☑ Basic $ 4500 - $ 6000

☑ MNC - High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm / 8.30am – 6pm )

☑ East Region – A1 Builder

Job Description

• Develop and manage project schedules from design to commissioning.
• Estimate durations, resources, and prepare progress reports.
• Handle tender submissions, site planning, and progress monitoring.
• Manage EOT claims and oversee RI/TOP schedules and handovers.

Job Requirements:

• Diploma/Degree in Civil Engineering or related
• Min 3 years of experience in construction planning building-related facilities.
• Proficiency in MS Project Planner, Primavera, or Synchro.

Interested applicants are welcome to apply or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

Job Description & Requirements

.Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

• Ensure appointed MV VCD and MV motor suppliers supply equipment that meets project specificatiions.
• Ensure appointed LV MCC panel suppliers supply electrical panel (MSS with DOL, soft-starter, 2 speed, LV VSD starters and control circuit of motor starter) that meets project specification.
• To coordinate with different stakeholders subcon, suppliers, main con and consultant with regard for detail design development of the LV MCC, MV, VSD and interfacing work between subsystem work package.
• Prepare FAT & SAT test plan for 6.6 kV MV VSD and MV motor.
• Prepare FAT & SAT test plan for LV MCC.
• Update SLD drawings for tie-in to upstream incomers and all downstream ACMV equipment.
• Update Low Voltage cable sizing & short circuit calculation.
• Update actual demand load calculation.
• Prepare discrimination study with all upstream incoming breakers for both MV 6.6kV and LV 400V equipment
• Attend meeting with suppliers, main contractor and consultants to provide reasonable explanation, possible solutions and guidance if they are in doubt.
• Ensure all cable routing with their associated wall openings and / or cable risers are provided for all 6.6kV and 400V ACMV equipment.

Requirements

• At least a Diploma in Engineering majoring in MEP / Electrical or related field.
• Minimum 4 years of working experience. Those with more years of experience will be considered a senior position ie Senior Engineer / Assistant Manager
• Those with Construction Industry (majoring in Electrical Control for ACMV) will be an added advantage.
• High level of initiative, independent, meticulous and able meet tight timeline.
• Able to work under pressure.
• Good command of English and computer literacy.
• Proficient in Ms Excel.
• Those with knowledge of AutoCad, Revit, Microstation and Primevera software will be an added advantage.
• Willingness to work at Tuas area with transportation pickup at designated MRT stations.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

One of the leading private healthcare providers in the region, providing comprehensive services from primary to tertiary care is now hiring for Anchor Doctor / Family Physician to manage the Primary Healthcare, GP Clinic (With some aesthetic procedures). This is a full-time on-site role located in Singapore.

Whole spectrum of family practice services from vaccinations for newborns to treatment of acute illness to management of chronic illnesses, minor surgeries and procedures for injuries and medical conditions for adults.

• Location: Northeast
• Working hours to be discussed: 40 to 45hrs/week

Job Description

1. Primary Care Consultations: Patients for a variety of health concerns, ranging from acute illnesses to chronic conditions. Conduct thorough assessments, medical histories, perform physical examinations, and provide diagnoses and treatment plans.
2. Preventive Care: Emphasize preventive medicine by promoting healthy lifestyles, providing vaccinations, and offering advice on lifestyle modifications.
3. Chronic Disease Management: Manage patients with chronic conditions such as diabetes, hypertension, asthma, and arthritis. This involves ongoing monitoring, medication management, and coordinating care with specialists when needed.
4. Minor Procedures: Perform minor procedures in the clinic, such as wound care management, suturing lacerations, removing skin lesions.
5. Minor Procedures (Aesthetic): Laser, Chemical Skin Peel, Botox & Skill Fillers, RF etc
6. Patient Advocacy: Advocating for patients' health needs and facilitating access to healthcare resources and support services in the community.

To excel in this role

• MBBS &/OR GDFM &/OR COC for Aes Med
• SMC Registered (Full)
• Excellent communication skills, and the ability to work collaboratively with other healthcare professionals to manage patient care and promote overall health and wellness
• Strong problem-solving skills, attention to detail, and the ability to make informed decisions based on patient information and data

Thank you for your interest in this job posting, please kindly be informed that only shortlisted candidates will be contacted directly, we sincerely appreciate your understanding in this.

R1438202 Ong Yan Qi
201417088Z BTI Executive Search Pte Ltd

Job Description

• Clean Exterior and Interior of cars including car washing and car grooming services, engine degrease, leather seat and door panel cleaning, carpet and upholstery cleaning, polishing and waxing services.
• Car engine cleaning.
• Vacuum interior of cars.
• Maintain cleanliness of washing bay and general areas.
• Other duties assigned by superior.

Job Requirements

• Honest and hardworking
• Positive work attitude
• Able to start work immediately
• Min 1 year of experience in car washing and polishing

Job Info

• Located at UBI (Nearby MRT station)
• 6 working days

Location: Central Singapore

Working hours: 4-day work week

Employment type: Permanent, Full-Time

Discipline/Department: Paediatric

Overview

• To diagnose and monitor various illnesses and conditions specific to children.
• To conduct regular consultations to review the progress of pediatric patients, adjusting treatment plans as necessary.
• To handle acute emergencies in the paeds department, such as respiratory distress, seizures, or severe infections, and stabilize patients for further treatment.
• To prepare and write medical reports.
• To update relatives on patients' conditions.
• To explain procedures to patients and their relatives, as well as obtaining consent for cases.
• To participate in the organization's teaching activities as directed by the HOD/MD

Requirements

• MBBS or post graduate qualification (Graduate Diploma/MMED) recognised by Singapore Medical Council
• Able to perform independently in the Department
• SMC Full-Registration

Thank you for your interest in this job posting, please kindly be informed that only shortlisted candidates will be contacted directly, we sincerely appreciate your understanding in this.

R1438202 Ong Yan Qi

201417088Z BTI Executive Search Pte Ltd

Job Description

• To support HR recruiting activities
• General HR and Administrative duties
• Publish job posting on job portal
• Liaise with recruitment agency to source candidates
• To screen, shortlist candidates and coordinate for interview arrangement
• Attend interview session
• Update recruitment status to the management

Job Requirement

• At least 1 year of working experience in the related field is required
• Bilingual
• Must possess at least a Diploma in any field
• Good communication skills

Job Info

• Located at UBI (Nearby MRT station)
• 5 working days

JOB SUMMARY

• The Senior Manager, Credit Risk Review will support the Team Leader, Credit Risk Review in providing an assessment of risks at a portfolio level, supported by intelligent review of portfolio data, risks already identified and discussed in various risk forums and an independent verification through tools such market checks, peer comparison etc., In addition, there will be a clear responsibility for ensuring high quality governance around the CRR processes are implemented and followed on an ongoing basis. Continuous assessment of portfolio and governance are the two key objectives for the team in which the Senior Manager, Credit Risk Review will work in.
• The scope of coverage includes the Corporate and Investment Banking (CIB) portfolio

RESPONSIBILITIES
Strategy

• To provide a risk focused, fact-based assessment of CCIB clients’ performance on all elements of the Credit Risk Framework specifically:
• Risk Management Principles
• Risk Management Approach / Quality of the Portfolio
• Risk Management Enablers
• Risk Governance

Business

• Understand and implement the strategic intent and collective agenda for the Function.
• Maintain and develop personal risk capabilities and skills to meet ongoing needs and plans.

Processes

• Ensure effective management of the operational risks within the Function and compliance with applicable internal policies, and external laws and regulations.
• Contribute to the continuous improvement of the operational efficiency and effectiveness of the Function’s risk management processes.
• Ensure that all work undertaken as a member of the Credit Risk Review function is delivered to the highest standards and within agreed budgets each year.
• Contribute to the development and maintenance of work programmes which reflect the current business organisation and operating environment.
• As directed to perform, support and lead the planning, fieldwork and reporting of Credit Risk Review’s engagements to deliver agreed objectives.
• Where guest reviewers are employed by Credit Risk Review, encourage and develop teamwork, and provide technical coaching.

People & Talent

• Demonstrate the appropriate culture and values within the function and across the wider organisation
• Undertake a detailed review of the credit quality, focusing on samples of individual credits, from origination, through to structuring, monitoring and report documentation to provide assurance of effective planning, communication, control, and risk management.
• Provide an independent assessment of the credit process and governance benchmarked against Portfolio Standards, Group Policies and Procedures, and Group values.
• Execute the Credit Risk Review function for CCIB and ensure that the programme of reviews is undertaken in accordance with the approved Terms of Reference for the function.
• Ensure that reviews provide a combination of assurance and anticipation; that the reports and findings are accepted by the CCIB business, and any actions arising therefrom are followed through to closure.
• Maintain a good understanding of the requirements of key external stakeholders in respect of risk management and ensure these are well understood.
• Maintain an open and cooperative relationship in dealings with regulators
• Responsible for delivering effective governance.
• Awareness and understanding of the regulatory framework in which the Group operates, and the regulatory requirements and expectations relevant to the role.

Regulatory & Business Conduct

• Display exemplary conduct and live by the Group’s Values and Code of Conduct.
• Take personal responsibility for embedding the highest standards of ethics, including regulatory and business conduct, across Standard Chartered Bank. This includes understanding and ensuring compliance with, in letter and spirit, all applicable laws, regulations, guidelines and the Group Code of Conduct.
• Lead the Credit Risk Review to achieve the outcomes set out in the Bank’s Conduct Principles
• Effectively and collaboratively identify, escalate, mitigate and resolve risk, conduct and compliance matters.

Key Stakeholders

Internal:

• Respective Group and Regional Credit Risk Committees
• Group and Regional Business Heads
• Group and Regional Heads of Audit, Legal & Compliance, and Operations.
• Regional Chief Risk officers, Chief Credit Officers and Senior Credit Officers
• Country Business and Segment Heads
• Business Chief Operating Officer
• PGC Chairpersons
• Group Head of Operational Risk
• Country CEOs
• Group Head GSAM

External:

• Regulators (at Group and Country level).

Our Ideal Candidate

• 10+ years of experience in Credit Risk, preferably within the Corporate and Investment Banking
• Effective Management of Credit Risk related to Corporate, Commercial and Institutional Clients
• Prior experience in Credit Risk, credit Approval or credit Analysis experience would be a very strong contributing factor.
• Knowledge of Policies: Understanding of the Credit Policies, Standards, Credit Risk Type Framework, and various Credit Application Systems
• Understanding of CIB business and Credit Risk
• Understanding of Risk management principles and governance
• CIB suitable accreditation which includes Corporate Credit Risk Management Certification (CCRMC) and/or Financial Institutions Credit Curriculum (FICC)

Role Specific Technical Competencies

• Credit Risk Management
• Understanding of the Credit policies and procedures
• Strong analytical, communication and interpersonal skills

About Standard Chartered

We're an international bank, nimble enough to act, big enough for impact. For more than 170 years, we've worked to make a positive difference for our clients, communities, and each other. We question the status quo, love a challenge and enjoy finding new opportunities to grow and do better than before. If you're looking for a career with purpose and you want to work for a bank making a difference, we want to hear from you. You can count on us to celebrate your unique talents and we can't wait to see the talents you can bring us.

Our purpose, to drive commerce and prosperity through our unique diversity, together with our brand promise, to be here for good are achieved by how we each live our valued behaviours. When you work with us, you'll see how we value difference and advocate inclusion.

Together we:

• Do the right thing and are assertive, challenge one another, and live with integrity, while putting the client at the heart of what we do
• Never settle, continuously striving to improve and innovate, keeping things simple and learning from doing well, and not so well
• Are better together, we can be ourselves, be inclusive, see more good in others, and work collectively to build for the long term

What we offer

In line with our Fair Pay Charter, we offer a competitive salary and benefits to support your mental, physical, financial and social wellbeing.

• Core bank funding for retirement savings, medical and life insurance, with flexible and voluntary benefits available in some locations.
• Time-off including annual leave, parental/maternity (20 weeks), sabbatical (12 months maximum) and volunteering leave (3 days), along with minimum global standards for annual and public holiday, which is combined to 30 days minimum.
• Flexible working options based around home and office locations, with flexible working patterns.
• Proactive wellbeing support through Unmind, a market-leading digital wellbeing platform, development courses for resilience and other human skills, global Employee Assistance Programme, sick leave, mental health first-aiders and all sorts of self-help toolkits
• A continuous learning culture to support your growth, with opportunities to reskill and upskill and access to physical, virtual and digital learning.
• Being part of an inclusive and values driven organisation, one that embraces and celebrates our unique diversity, across our teams, business functions and geographies - everyone feels respected and can realise their full potential.

Recruitment Assessments

Some of our roles use assessments to help us understand how suitable you are for the role you've applied to. If you are invited to take an assessment, this is great news. It means your application has progressed to an important stage of our recruitment process.

Visit our careers website www.sc.com/careers

Details of the Division and Team:

Loans & Structured Credit SEA is a part of Global Financing & Credit Trading, Asia that covers a wide range of financing transactions for SE Asia corporate clients, including private credit and corporate loans, across senior and mezzanine parts of the capital structure.

What we will offer you:

A healthy, engaged and well-supported workforce are better equipped to do their best work and, more importantly, enjoy their lives inside and outside the workplace. That’s why we are committed to providing an environment with your development and wellbeing at its center.

You can expect:

Flexible benefits plan including virtual doctor consultation services

• Comprehensive leave benefits
• Gender Neutral Parental Leave
• Flexible working arrangements
• 21 days of annual paid leave, plus public holiday & Flexible Working Arrangement

Your key responsibilities:

• Carry out detailed credit and financial analysis
• Prepare credit memos, financial modelling, scenario analysis for senior / mezzanine loans to corporates
• Interact with Corporate Finance and C-suite personnel alongside senior DB team members to diligence underlying companies, assess the transaction, and to execute trades
• Assist the team with various internal approval processes during execution
• Ongoing monitoring of existing positions

Your skills and experience:

• Minimum 3 years experience in structured loans, working for an Investment Bank
• Experience in SEA syndicated loans, pre-IPO financing and illiquid share-backed margin loans, across high yield, corporate and sponsor space.
• Experience in financial modeling across manufacturing companies, services sector, real estate and natural resources
• Experience in carrying out deep dive credit analysis, financial modeling for companies across various sectors
• Ability to understand and analyse financial statements, accounting background.
• Good communication skills, analytical and detailed oriented

Role is required to be performed on-site at One Raffles Quay office. Relevant vaccination requirements may apply

How we’ll support you:

• Flexible working to assist you balance your personal priorities
• Coaching and support from experts in your team
• A culture of continuous learning to aid progression
• A range of flexible benefits that you can tailor to suit your needs
• Training and development to help you excel in your career

About us and our teams:

Deutsche Bank is the leading German bank with strong European roots and a global network. click here to see what we do.

Deutsche Bank & Diversity:

We strive for a culture in which we are empowered to excel together every day. This includes acting responsibly, thinking commercially, taking initiative and working collaboratively.

Together we share and celebrate the successes of our people. Together we are Deutsche Bank Group.

We welcome applications from all people and promote a positive, fair and inclusive work environment.

Benefits:

· Basic salary up to $4000

· Better career progression & growth

· AWS & Bonus

Job Scope:

· Handle full or partial accounting functions, including accounts receivable, accounts payable, general ledger, and balance sheet management.

· Ensure the timely and accurate preparation of monthly, quarterly, and annual financial statements.

· Manage tax-related tasks and oversee GST invoice submissions.

· Work closely with auditors to facilitate year-end reporting and audits

·Develop budgets and forecasts to support effective cash flow management.

Job Requirements:

· At least three years of relevant experience.

To Apply, kindly click on the "APPLY NOW" button and job details.

We regret that only shortlisted candidates will be notified.

StaffKing Pte Ltd (20C0358) | Tan Pei Xuan (R24124430)

Business Development Executive (F&B Industry)

• Salary: $3000 - $4000 + Car Allowance $1200
• Working Days: 5.5 days work week
• Working Hours: 8.30am - 5.30pm
• Working Location: Senoko South Rd

Key Responsibilities

• Responsible for developing new prospects and maintaining existing accounts in the Food Service/ HORECA channels.
• Identify leads and develop strong business relationship with customers
• Maintaining of good rapport with existing customers
• Responsible for driving growth and achievement of monthly sales target
• Managing customer’s account receivables to ensure timely and prompt payment
• Monitor current trends in the industry with competitors and market activities

Requirements

• Min. Diploma in Business Administration or equivalent
• Min. 1-3 years of relevant Business Development / Sales experience in F&B industry (Preferred in Food Service Channels)
• Driving license with own Transport is a must to perform customer visits

☎️ Whatsapp +6588278652 (Hym)

Goh Hym Yien Reg No: R24121939

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Job Responsibilities:

• Attend to feedback emails, ensuring thoughtful engagement and resolution-focused correspondence;
• Utilise system to check past feedback cases or create new feedback cases for the necessary staff to follow up;
• For cases not under TC purview, assist feedback provider to lodge feedback with authorities where necessary;
• Provide support to Estate team for feedback handling;
• Miscellaneous administrative duties on adhoc basis;
• Any other duties as instructed by your supervisor / HOD.

JOB REQUIREMENTS

• Able to handle high volumes of emails;
• Possess excellent and effective written communication;
• Be meticulous;
• IT savvy;
• To be stationed at Hougang Branch Office.

Working Hours either:

1. Morning Shift: Mondays - Fridays: 8am - 1pm, 5 days workweek OR
2. Afternoon Shift: Mondays - Fridays: 12pm - 5pm, 5 days workweek

Only shortlisted candidates will be notified.

Key Requirements:

• Need candidate with full set accounting exp

Key Responsibilities:

• Maintain the full set of accounts for the company, including general ledger, accounts payable, and accounts receivable, as the sole accounting professional in the company.
• Responsible for all aspects of the accounting and financial functions of the company.
• Process payroll, employee expense claims, statutory contributions (CPF, IRAS submissions, etc.) and government reimbursements (childcare leave, paternity leave, NSmen makeup pay, etc.)
• Ensure timely submission of GST returns and other regulatory filings, taking full responsibility for compliance.
• Monitor and manage foreign currency exposure.
• Prepare and manage monthly financial statements, management reports, and cash flow forecasts independently.
• Prepare IR8A forms for employees to ensure accurate tax reporting and compliance.
• Conduct bank reconciliations and monitor cash flow to ensure financial stability.
• Liaise with external auditors, tax agents, and other stakeholders during audits and year-end closing.
• Analyse the financial performance of the company and provide recommendations for improvement.
• Review financial procedures, internal controls, and business processes/systems to ensure effective controls are in place.
• Assist with budgeting, forecasting, and variance analysis to support overall financial planning and decision-making.
• Handle any ad hoc accounting and finance tasks as required by management.

Interested applicants, please email your updated CV to [email protected] or WA 97527630 for more information.

We regret to inform that only shortlisted candidates will be contacted.

EA Personnel No: R23116144

EA Personnel Name: Lim Ruo Yi, Rachel

Company Registration Number: Recruit Express Pte Ltd (99C4599)

Benefits:

• Attractive salary range of $2,200 to $3,000 plus variable bonus
• 5-day work week with two off days
• Rostered working hours providing flexibility
• Opportunities to work in a dynamic showroom environment
• Gain valuable customer service and administrative experience

Job Description:

We are looking for a friendly and customer-oriented Front Desk Officer to join our Sales & Marketing department at Alexandra Road. In this role, you will be the first point of contact for customers, managing phone calls, greeting visitors, and ensuring the showroom is in top condition. This position offers the chance to work in a fast-paced, customer-focused environment where attention to detail and excellent service are key.

Roles & Responsibilities:

• Answer phone calls and respond to general customer inquiries
• Greet and check in customers, ensuring smooth visitor flow in the showroom
• Manage the Sales Executive turn system efficiently
• Ensure that the showroom is neat and organized, including maintaining display cars
• Serve refreshments to customers and provide exceptional customer service
• Perform general administrative duties as required

Requirements:

• Experience in Receptionist or customer service roles
• Strong communication and social skills with a customer-first mindset
• Energetic, hardworking, and people-focused
• Basic knowledge of Microsoft Office and data entry
• Willingness to work weekends and public holidays
• Comfortable working at off-site locations when required

Additional Information:

• Location: 281 Alexandra Rd, Singapore 159938
• Photo must be attached to the resume ****
• Rostered working hours from Monday to Sunday as described

(WEST REGION) - Toh Guan Road

Working hours:

• 8am-430pm (Mon-Fri)
• 8am – 12pm (Alternate Sat)

Highlights

• Freight forwarding industry
• Must hv experience in E-commerce warehouse management
• Leadership is a must

We are seeking a self-driven, motivated, and independent Senior Executive/Executive join our Fast Fashion eCommerce operations.

In this role, he/she is required to lead, direct, manage and plan day to day activities to achieve operational objectives and completion targets/goals.

Responsibilities:

· Accept and carry out responsibilities in accordance with the company compliance, health, and safety policies.

· Managing and ensuring the fulfillment of Inbound/Outbound/VAS activities based on customer’s volume trend, sales campaigns/activities to ensure a well-functioning supply chain to local stores

· Monitoring of volume/activities ensuring facilities and resources are optimized and sufficient to support a consistent and flow-functioning distribution centre.

· Manage team performance and workload to ensure effective and efficient service delivery by the operations team.

· Keeping close contact with and customers, transporter, and suppliers to ensure good service levels, productivity, and optimal customer service

· Ensuring operational plans and forecast are executed promptly.

· Decision making based on analytical data.

· Responsible for meeting KPIs within the agreed lead time.

· Lead, develop and support team members growth and performance by through continuous improvement (Training/Materials) and setting qualities targets.

· Undertake any other activities as directed by immediate superiors.

Job Requirements:

· Minimum Diploma in logistics or Supply Chain Management or a related field

· Experience in managing and leading a team required

· Strong leadership skills –Ability to delegate work, follow up on the results and provide constructive, straightforward feedback

· In-depth knowledge of key principles in operations.

· A hands-on person with min. 2 years of supervisory experience and people management

· Able to ideate and drive projects in fast-paced environment

Highly organised and able to multitask based on the needs in a fast paced environment.

HOW TO APPLY:

Interested applicants, please click on “Apply Now”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Chris Poh Tze Zheng

EA Personnel Reg No: R24120101

Tour & Travel Package Sales Executive

Location: Nearest MRT: Nicoll Highway/ Bugis

Working Hours: 5.5 days (Mon – Fri, 9am – 5pm & Sat 9am – 1pm)
Salary: S$ 2,800 ~ 4,500 (Starting pay will be based on experience)

This company is the general service administration for Saudi Arabian Airlines which includes both inbound and outbound services such as Accommodation, Transportation, Sightseeing Tours, Accommodation, Visa Services, Air Ticketing.

Job Description

• Building and maintaining relationships with our agents and clients.
• In charge of updating our social media platforms with updates, promotions, advertising campaigns and any other information that would further our market presence.
• Work with the team and top executives to plan and create marketing and future sales strategies.
• Do regular reports of agent visits, complaints, etc. Analyze previous sales data trends to design sales strategies and set sales goals.
• In charge of handling BSP whenever required.

Job Requirements

• Experienced in GDS System, preferably Amadeus / Galileo will be an advantage.
• Knowledge in ticketing system is a bonus.
• Candidates with no prior experience are welcome to apply.

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

Details of the Division and Team:

Loans & Structured Credit SEA is a part of Global Financing & Credit Trading, Asia that covers a wide range of financing transactions for SE Asia corporate clients, including private credit and corporate loans, across senior and mezzanine parts of the capital structure.

What we will offer you:

A healthy, engaged and well-supported workforce are better equipped to do their best work and, more importantly, enjoy their lives inside and outside the workplace. That’s why we are committed to providing an environment with your development and wellbeing at its center.

You can expect:

Flexible benefits plan including virtual doctor consultation services

• Comprehensive leave benefits
• Gender Neutral Parental Leave
• Flexible working arrangements
• 25 days of annual paid leave, plus public holiday & Flexible Working Arrangement

Your key responsibilities:

• Carry out detailed credit and financial analysis
• Prepare credit memos, financial modelling, scenario analysis for senior / mezzanine loans to corporates
• Interact with Corporate Finance and C-suite personnel alongside senior DB team members to diligence underlying companies, assess the transaction, and to execute trades
• Assist the team with various internal approval processes during execution
• Ongoing monitoring of existing positions

Your skills and experience:

• Minimum 6 years experience in structured loans, working for an Investment Bank
• Experience in SEA syndicated loans, pre-IPO financing and illiquid share-backed margin loans, across high yield, corporate and sponsor space.
• Experience in financial modeling across manufacturing companies, services sector, real estate and natural resources
• Experience in carrying out deep dive credit analysis, financial modeling for companies across various sectors
• Ability to understand and analyse financial statements, accounting background.
• Good communication skills, analytical and detailed oriented

Role is required to be performed on-site at One Raffles Quay office. Relevant vaccination requirements may apply

How we’ll support you:

• Flexible working to assist you balance your personal priorities
• Coaching and support from experts in your team
• A culture of continuous learning to aid progression
• A range of flexible benefits that you can tailor to suit your needs
• Training and development to help you excel in your career

About us and our teams:

Deutsche Bank is the leading German bank with strong European roots and a global network. click here to see what we do.

Deutsche Bank & Diversity:

We strive for a culture in which we are empowered to excel together every day. This includes acting responsibly, thinking commercially, taking initiative and working collaboratively.

Together we share and celebrate the successes of our people. Together we are Deutsche Bank Group.

We welcome applications from all people and promote a positive, fair and inclusive work environment.

Business Development Executive (F&B Industry)

• Salary: $3000 - $4000 + Car Allowance $1200
• Working Days: 5.5 days work week
• Working Hours: 8.30am - 5.30pm
• Working Location: Senoko South Rd

Key Responsibilities

• Responsible for developing new prospects and maintaining existing accounts in the Food Service/ HORECA channels.
• Identify leads and develop strong business relationship with customers
• Maintaining of good rapport with existing customers
• Responsible for driving growth and achievement of monthly sales target
• Managing customer’s account receivables to ensure timely and prompt payment
• Monitor current trends in the industry with competitors and market activities

Requirements

• Min. Diploma in Business Administration or equivalent
• Min. 1-3 years of relevant Business Development / Sales experience in F&B industry (Preferred in Food Service Channels)
• Driving license with own Transport is a must to perform customer visits