Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 3 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.
• Candidates with no prior working experience are welcome to apply.

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D/Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design.
• Min. 5 years of experience in CMOS Analog IC design and simulation.
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler) and photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent).
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Roles and responsibilities:

· To do conceptual and detailed machine design with regard to mechanical aspects;

· To prepare solid models, layouts, views and bills of materials for assigned design machine assemblies and sub-assemblies;

· To prepare final design configurations, layouts, solid models and production/engineering data;

· To assist in preparation of machine documentation, specifications, manual.

Job Requirements:

· Diploma or relevant in Mechanical Engineering;

· Will consider fresh-graduate.

· Preferably with working experience in designing automation systems , jig and fixture ,robotics and conveyor system.

· Proficiency with Solid Works is desirable;

· Ability to lead, manage project and communicate well with customers, vendors, engineers, technicians and team members.

Responsibilities:

- Planning of art lessons / programs according to students' learning objectives

- Developing students' drawing, colouring and painting techniques and interest in art

- Able to conduct art-related activities such as oil painting, acrylic painting, watercolour painting, sketching, clay, chinese painting, art & craft independently

- Able to teach students of different age group (from age 3 to adult)

- Assess students' learning progress and feedback to parents

- Prepare the classroom and set up equipment / materials prior every lessons

- Perform daily housekeeping to keep the venue clean & tidy especially after every classes

- Any other duties as assigned by superior

Requirements:

- Passionate in Art Education

- Minimum Diploma in Fine Arts

- Bilingual in English and Chinese as to liaise with Chinese speaking parents

- Good communication & interpersonal skills

- Friendly, patience and creative

- Able to work on weekends & PH

- Basic salary + incentives (upon confirmation)

Please send detailed Resume to [email protected]

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Highlights

• Comm + AWS + Quarterly Bonus
• Retail hours
• Art piece/ Highend/ Luxury

Responsibilities:

• Ensure high levels of customer satisfaction through excellent sales service.
• Maintain outstanding store condition and visual merchandising standards.
• Ensures the stock model, according to the guidelines set by the Company and carry out inventories according to the established periodicity.
• Collaborate into achieving the sales target.
• Good housekeeping of stores.
• Monthly stock take

Requirements:

• “O” level
• Min 2 years in retail industries

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Pierre Chung Yih Shern
EA Personnel Reg No: R22111092

Responsibilities

* Handle full set of accounts for a group of companies

* Perform government subsidy reconciliation across companies

*Analysis and preparation of monthly management reports

* Work with centres to set and achieve financial goals and metrics

* Provide financial and accounting leadership to junior accounting staff

*Participate in financial reviews and audits

Requirements

* Degree/Diploma in Accounting or equivalent

*Relevant work experience as an Accountant especially in a related industry

*Knowledge of bookkeeping best practices and finance regulations

* An ability to concentrate , work quickly and accurately to meet deadlines

* Hands-on experience with MS Excel and accounting software (eg. MYOB)

* Good organisation and filing skills

* Ability to handle sensitive, confidential information

*Honest, discreet and trustworthy

_______________________________

* Only Singaporean & PR need apply.

Job description and scopes:

1. Oversee and supervise C&S design, including authoring submissions and coordinating with consultants and architects and architects
2. Design Coordination with Consultant, Client , AC, Inter-Disciplines (MEICA & BS) and Sub Contractors
3. Design Package preparation for MEICA Equipment Plinth and Bolts design
4. Prepare & update Schedules for Architectural Authority Submission & ST Submissions
5. Prepare & update Schedules for Submissions of Deliverables list
6. Prepare RFI & RFC for CSA related items
7. Prepare the workflow of QPD / QPS Roles
8. Prepare the BCA Permit forms for site commencement
9. Review and comments of Architectural authority Submission drawings (such as URA, FSSD, PUB, LTA, NEA ,etc…)
10. Review and comments of BCA Submission of Civil, Structural and Geotechnical work (ST Submissions)
11. Review and comments of IFC drawings , which are extracted from 3D Model
12. Review and comments of Shop drawings, developed by Sub-contractors for Construction
13. Review and comments of Design Drawings and Calculations of Miscellaneous design
14. Review and comments of QA / QC documents
15. BIM 3D Model review and Comments and clash resolutions
16. Follow up on Prolog Submissions
17. Follow up with Inter-disciplines leads for Design Input information for C&S design
18. Change Register for design change control
19. Preparing RFQ Packages for CSA items ( Design Drawings & Specifications ) to Procurement
20. Monitor Site construction Progress & addressing site issues
21. Assist and attending BIM Model Walk-through, Hazop , Almop and Dfs, PSR and Risk management Work shops
22. Co-ordinate and Attending Monthly Progress Meeting & CSA progress meeting with Client & Consultant , and Main QP
23. Co-ordinate and attending SOCT Meeting with potential sub-contractors & suppliers
24. Prepare MOM of CSA Meeting, presentation slides for Monthly progress meeting & preparing Monthly progress report for CSA updates
25. Verifying Claims from design consultant
26. Prefer to assis on the Role of Lifting Engineer , review Lifting plans and approval of Lifting Permit

Requirements (Qualification & Experience):

• With relevant experience in managing similar complexity and scale
• Applicants with Lifting Engineer certification will be preferred

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Highlights

• Comm + AWS + Quarterly Bonus
• Retail hours
• Art piece/ Highend/ Luxury

Responsibilities:

• Ensure high levels of customer satisfaction through excellent sales service.
• Maintain outstanding store condition and visual merchandising standards.
• Ensures the stock model, according to the guidelines set by the Company and carry out inventories according to the established periodicity.
• Collaborate into achieving the sales target.
• Good housekeeping of stores.
• Monthly stock take

Requirements:

• “O” level
• Min 2 years in retail industries

HOW TO APPLY:

Interested applicants, please email to “[email protected]”.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Sim Jia Hui (Jacinda)
EA Personnel Reg No: R22106242

1. Job Description

· Prepare and provide responses for tender bidding, submission of relevant costs spreadsheets and profitability analysis.

· Managing contractual claims to protect commercial interest.

· Prepare requests for proposals for distribution to vendors.

· Analyze all requirements and provisions in contracts, including terms and conditions, to ensure compliance with all laws and regulations and company policies and procedures.

· Ensure that contracts are executed in accordance with guidelines.

· Analyze a contract’s risk to the business.

· Visit client sites and meet with business partners.

· Communicate contract implementation to team members and other internal stakeholders.

· Lead complex contract negotiations and manage all changes and addendums to existing contracts.

· Ensure that all raw material used meets the specified requirements.

· Prepare reports on the status of contracts for the Management

· Establish margins for overheads and profits in tender sums.

· Drive cost planning and control.

2. Administrative works

· Communicate payment regime to relevant stakeholders.

· Attend project meetings.

· Prepare valuations for interim payments and/or recommendation for payment to contractors, specialists and sub-contractors including recommendations for payment.

· Measure variation of cost claims.

· Prepare final accounts and/or relevant pricing variations.

3. Team Management

· Establish good working rapport with colleagues, to improve work processes, productivity and hit rate of tenders.

· Ensure that team members have a complete understanding of the project scope of works.

· Conduct/participate at briefings and regular meetings.

Requirement:

· Good communication skill is needed for discussion with both internal and external members, such as the sales, designer, production, operations, subcontractor, and suppliers.

· Familiar with the use of MS applications, such as Words, Excel, PowerPoint, and Outlook

· Conflict management and problem-solving abilities.

· Independent, positive attitude, strong sense of responsibility.

· Prior project management experience is preferred (1-3yrs)

· Good with numbers which will be meant for computing costing and on-site measurement.

· Knowledge in filing system and processes

· Proficiency Mandarin is an advantage.

Benefits:

· 5.5 days’ work week (weekend attendance only when required)

· 2% commission based on the net profit value.

· Staff pantry

· Medical, dental, transportation ($200- $300), and mobile phone bill ($50) reimbursement

· Friendly and conducive environment

· Flexible working arrangement

· Clear career advancement

Join Skyy Design Workshop to realize your true potential!

Kindly email your resume/CV to [email protected] and attention to HR Manager.

Salary :

Base salary plus commission

Job Summary:

We are seeking an experienced Construction and Interior Project Manager to lead our construction projects from planning to completion, ensuring they are delivered on time, within budget, and to the required quality standards.

Key Responsibilities:

- Project Planning: Develop comprehensive project plans, including schedules, budgets, and resource allocation.

- Project Execution: Supervise and direct the project team to ensure work is carried out as planned and meets quality standards.

- Team Management: Lead and manage the project team, providing guidance and coordination to various stakeholders, ensuring effective communication and collaboration.

- Issue Resolution: Identify and address issues and challenges in the project, devise solutions, and take appropriate actions.

- Quality Assurance: Ensure the project adheres to quality standards and specifications, collaborate with relevant stakeholders, conduct inspections and audits.

- Progress Monitoring: Monitor project progress, ensure timely completion of work, address delays and changes promptly.

- Compliance: Ensure the project complies with relevant laws and regulations, ensure all work meets safety and environmental requirements.

- Risk Management: Identify and assess risks, develop risk mitigation plans, and oversee their implementation.

- Reporting: Provide regular progress reports to project stakeholders, including project status, issues, and risks.

Requirements:

- Bachelor's degree or related in Construction Management, Civil Engineering, or related field

- Minimum 5 years of experience in construction project management

- Proven track record of successfully managing construction projects

- Excellent communication, leadership, and problem-solving skills

- Ability to work under pressure and meet deadlines

- Familiarity with construction software and technologies

We are seeking a highly organized and detail-oriented Construction Admin cum Account to assist in the management and coordination of construction projects.

Main Duties and Responsibilities:

- Issue invoices in a timely manner.

- Assist in managing and coordinating with various stakeholders, including consultants and contractors.

- Ensure timely issuance of Statements of Account (SOA) and track payments.

- Monitor construction progress, conduct site inspections to ensure compliance, and identify discrepancies.

- Assist in preparing, managing, and administering construction contracts.

- Prepare and submit project progress reports.

- Perform other relevant duties and tasks as assigned.

Requirements:

- Diploma in Administration or a related field.

- At least 2 years of relevant experience in accounting, bookkeeping, or a related field.

- Proficiency in accounting software, drafting tools, and project management systems.

- Excellent coordination and stakeholder management skills, with the ability to work with diverse groups.

- Detail-oriented, organized, and a collaborative team player.

JOB DESCRIPTION

In this position, the individual thoroughly understands digital design specs of various IP blocks and SoC architecture definition

• Develop detailed module level and SoC level testplans for all the functional features, based on the design spec.

• Develop ASIC verification environment including all the respective components such as stimulus, checkers, assertions, monitors and scoreboards.

• Develop directed and constrain-random verification functional tests and simulate using EDA tools to verify functional spec is working

• Execute verification plans, including design bring-up, DV bring-up, regression enabling for all the features.

• Collaborate with digital design team to debug functional testcases and deliver functionally correct designs

The ideal individual must have proven ability to achieve results in a fast moving, dynamic environment

JOB REQUIREMENTS

· BSEE or MSEE, entry level

· Strong communication, analytical and documentation skills and ability to interface with other groups

· Strong VLSI functional verification experience, preferably with exposure to complex, high speed custom VLSI products

· Strong hardware functional verification language and Object-oriental language development skill. Prefer with SystemVerilog/ UVM experience

· Familiar with ASIC verification methodology, tools, and development flow

· Working experience or familiar with Ethernet L2/L3 switch/router, SOC, AMBA bus, high-speed IO (USB-2/3, PCIe gen2/3, SATA), Flash controller, or CPU peripherals

We're seeking creative marketers to join our team!

As a successful Marketing Executive, you'll manage our social media presence, craft engaging content, and edit stunning social videos and photos showcasing our residential and commercial renovations. You'll also create professional advertising to enhance our brand appeal.

Responsibilities:

- Manage and maintain our social media accounts (Facebook, Instagram, TikTok, Xiao Hong Shu, etc.)

- Develop and implement social media strategies aligned with our marketing goals

- Create and curate engaging content (images, videos, headlines, etc.) for social media posts

- Edit high-quality videos using software

- Analyze social media metrics and adjust strategies accordingly

- Stay up-to-date with the latest social media trends and best practices

Requirements:

- 2+ year of experience in social media management and video editing

- Excellent communication and project management skills

- Ability to work in a fast-paced environment and meet deadlines

- High attention to detail and creativity

- No academic qualifications required;

We're looking for a motivated, talented individual with a passion for social media and video editing

Job Summary:

- Lead construction projects from planning to completion, ensuring timely, within-budget, and high-quality delivery.

Key Responsibilities:

1. Project Planning: Develop comprehensive plans, schedules, budgets, and resource allocation.

2. Project Execution: Supervise and direct the project team to ensure work meets quality standards.

3. Team Management: Lead and manage the project team, ensuring effective communication and collaboration.

4. Issue Resolution: Identify and address issues, devise solutions, and take appropriate actions.

5. Quality Assurance: Ensure adherence to quality standards, conduct inspections and audits.

6. Progress Monitoring: Monitor project progress, address delays and changes promptly.

7. Compliance: Ensure compliance with laws, regulations, safety, and environmental requirements.

8. Risk Management: Identify, assess, and mitigate risks.

9. Reporting: Provide regular progress reports to stakeholders.

Requirements:

1. Education: Bachelor's degree in Construction Management, Civil Engineering, or a related field.

2. Experience: Minimum 5 years in construction project management.

3. Track Record: Proven success in managing construction projects.

4. Skills:

- Excellent communication, leadership, and problem-solving skills.

- Ability to work under pressure and meet deadlines.

- Familiarity with construction software and technologies

We are seeking an experienced and skilled Carpenter to join our team. As a Carpenter, you will be responsible for constructing, installing, and repairing structures and fixtures made of wood, wood substitutes, and other materials. You will work on various projects, including building, renovating, and maintaining buildings, furniture, and other woodwork products.

Key Responsibilities:

- Construct, install, and repair structures and fixtures made of wood, wood substitutes, and other materials

- Read and interpret blueprints, diagrams, and specifications to ensure accurate measurements and construction

- Measure, cut, shape, and assemble materials using hand and power tools

- Install doors, windows, cabinets, shelving, and other fixtures

- Build and install custom furniture, trim, and molding

- Repair and maintain existing structures and fixtures

- Work with other construction professionals to ensure project completion

- Follow safety guidelines and regulations

Requirements:

- High school diploma or equivalent required; apprenticeship or vocational training in carpentry preferred

- 3+ years of experience in carpentry

- Strong understanding of construction methods, materials, and safety protocols

- Proficient in using hand and power tools

- Ability to read and interpret blueprints and diagrams

- Good communication and teamwork skills

- Physical ability to lift, carry, and maneuver heavy materials

Job Responsibilities

· Inform Design Team, Cost / Commercial team of all client-led change proposals and instructions.

· To manage local consultants in the execution of design development.

· To assist in coordination between Design Team, Consultants, Operator stakeholders.

· Assist site team in resolution of site clashes.

· Participate in workshops and lead, manage the consultants as required in review and comment of shop drawings in terms of constructability, sequencing and ensure quality of he design aesthetic is maintained throughout.

· Follow through on design development of Concept, Schematic, Development and Construction Documentation for all projects where applicable.

· To attend and review Mock Ups.

· Conduct site and factory visits to ensure implementation and compliance with approved design intent and direction.

· Interfacing with internal and external Operations Management to ensure timely incorporation of operational requirements within the project design.

· Manage the design change process to ensure minimal impact to project schedule and minimize cost impacts as a result of such design change.

· To assist consultants and design team to complete and resolve any unforeseen interface problems throughout the various Design Phases.

JOB REQUIREMENTS

• Minimum 8 year’s working experience in Architecture Design Management of Hospitality would be preferred
• Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Architecture, Interior Design or equivalent.
• Possess good communications and people skills
• Good organization, coordination and leadership skills
• Required skill(s): design development, project management, construction.

We are seeking for a motivated Design Engineer specializes in the design, analysis, and coordination of building works in construction projects. These professionals work closely with architects, structural engineers, and construction teams to ensure compliance with design specifications, and collaborating with various stakeholders to achieve project goals.

Responsibilities:

• Prepare and complete precast shop drawings within specific time and in accordance with the project timeline.
• Check for accuracy and update amendments to precast shop drawings.
• Produce precast layout plans and fabrication shop drawings of precast concrete elements for production and submission to clients.
• Liaise with consultants concerning drawing details and technical issues.
• Liaise internally with production and suppliers on the submission/ issuance of shop drawings, highlight technical issues and keep them updated of any revisions.
• Incorporate on the drawings (2D and 3D) and update any amendment openings and recesses, architectural features, cast-in-items, lifting system and any other relevant details.
• Coordinate Structural, Architectural and M&E drawings to check and highlight any discrepancy and raise RFI to finalize precast shop drawings for production.
• Request any detail required for precast shop drawings.
• Check every detail and ensure precast drawings tally with construction drawings.
• Attend technical meetings with consultants/clients as and when required.
• Perform any other ad-hoc duties assigned.

Requirements:

· Bachelor's degree in Building/Civil Engineering or related as recognized by PE Board.

· Minimum 5 years’ experience in site planning and coordination works for building projects.

· Minimum of 3 years of relevant practical experience in Precast design for building works in Singapore.

· Familiar with both structural detailing (including rebar detail) and basic architectural detailing.

· Proficiency in software (e.g., AutoCAD, Revit, TELKA or All Plan).

· Excellent organizational and time management skills.

· Strong communication and interpersonal skills.

· Attention to detail and a commitment to quality.

· Ability to work independently and as part of a team.

Job Description

• Design and implement computational / AI methods in Architecture, Engineering and Construction (AEC) domains;
• Research and prototype implementations of emerging digital technologies that can be harnessed in the AEC;
• Regularly document and explain decisions made in creating the prototype;
• Work in a team to actively contribute new ideas, technologies and insights regarding the development of AEC tech;
• Periodically attach to Architectural Design teams throughout the building design lifecycle to immerse in building design tasks to discover pain points and test solution prototypes;
• Schedule and organize user research / testing / feedback sessions.

Job Requirements

• Proficiency in Revit + Dynamo, Rhino + Grasshopper, or other parametric design software;
• Proficiency in Python, Typescript, C#/.NET;
• Proficiency in version control using Git;
• Experience in UI/UX.
  

Good to have Skills (in order of priority)

• Proficiency in Linux
• Proficiency in Containers e.g., Docker, Podman, Kubernetes
• Familiarity with the following:
• IFC (Industry Foundation Class) Spec
• APIs for Revit, Rhino, QGIS, Blender, SketchUp
• Web application development
• API development
• Experience in Ruby
• Experience in Databases such as SQL, MongoDB

Job Scope:

As an Accounts Executive, you will be responsible for managing various accounting functions independently.

Your key responsibilities include:

• Handling the full set of accounts, ensuring accuracy and compliance.
• Performing data entry for invoices and updating accounts receivable records, issuing invoices promptly.
• Managing accounts payable, performing reconciliations, and processing payments in a timely manner.
• Posting and processing journal entries to accurately record all business transactions.
• Assisting in the review of expenses, contracts, revenue reports, and other financial documents as assigned.
• Updating financial data in databases to ensure accuracy and availability of information.
• Assisting in quarterly GST preparation and submission, as well as annual auditing and tax requirements.
• Preparing financial schedules (General Ledger, accounts receivable, accounts payable, fixed assets) to ensure timely monthly closing of accounts.
• Compiling and analyzing financial information for reporting purposes.
• Preparing financial statements and management reports for internal use.
• Assisting in cash flow management and forecasting for assigned entities.
• Performing any additional duties and responsibilities as assigned by management.

Requirements:

• Minimum 2 years of relevant accounting experience.
• Highest qualification in Accounting or Finance (e.g., Bachelor’s degree or equivalent).
• Proficiency in accounting software and Microsoft Excel.
• Strong attention to detail and analytical skills.
• Ability to work independently and meet deadlines.
• Availability: Must be able to start work immediately.

How to Apply:

Please submit your resume and cover letter to [email protected] by 31 Dec 2024. We look forward to your applications!

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

Job Purpose:

The Art Teacher is responsible for developing each child interest in arts and the ability to express their artistic ability and creativity, to acquire knowledge and aesthetic understanding, to nurture and develop talents.

Job Responsibility:

• Prepare course materials and execute planned art curriculum lessons in group settings.
• Educate and nurture child to express artistic ability, creativity through principles of art and techniques.
• Demonstrate art techniques in activities including drawing and painting.
• Provide guidance by which children develop aesthetic concepts and appreciations.
• Guide and explain to children on proper care and use of art materials and tools.
• Adopt supportive classroom approach which facilitates positive learning and development.
• Encourage children to express their own personalities and thoughts through creative process.
• Evaluate each child’s performance and growth in knowledge and aesthetic understandings.
• Provide quality feedback on child’s development progress.
• Participate in campus events including parent meeting sessions and festive events.
• Perform any other duties and responsibilities as assigned by the Art Teacher (Supervisor).

Job Requirement:

• Possess Diploma or Bachelor degree in Arts or equivalent.
• Prior experience working in classroom setting is an added advantage.
• Candidates who are innovative, highly driven and take initiative are encouraged to apply.
• Passionate in engaging, teaching and developing children.

Working Hours (43 hours per work week):

Mon : off

Tuesday - Friday : 1.30pm - 7.30pm

Saturday and Sunday: 9.00am - 7.30pm

Looking forward on your resume. Please drop your resume to [email protected].

Regret to inform you that only shortlisted candidates will be notified.

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740