Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Carpentry supervisor

Working Day: 6 days
Working Hours: Monday - Saturday 8am - 5pm
Location: Woodland
Salary: $2800- $3500 ( Depend of experience)

Job Description:

• Supervise carpentry staff and provide direction
• Monitor and inspect work to ensure quality
• Perform maintenance, repairs, or installation of carpentry projects
• Take measurements and calculate the size and amount of material needed
• Cut, shape and other material according to measurements

Requirement:

• At least 3 years relevant working experience
• Understand detail drawing of carpentry
• Experienced and ability in this field of work such as to fabricate complicated carpenters and installations
• Able to arrange site works for workers

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Job Description

Sea Forrest Engineering Pte Ltd (a subsidiary of BH Global Corporation Ltd) seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Responsibilities

1) Electrical Design

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Requirements

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

Interested candidates, do send your resume to [email protected]

**Shortlisted candidates will be notified through email for an interview.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

• Reporting to the General Manager and responsible for technical specification and definition of industrial systems, products and solutions including system and product design, technical sourcing of such systems / products and digitization applications

• To attend technical review with sales team and technical meetings with clients

• To attend coordination meetings with architects, M&E and structural consultants

• To lead a small team of designers; monitor project design submission schedule, check designs and shop drawings, training designers, etc.

• To attend technical meetings with main contractors. Coordinate pipe clashes with M&E and structural services

• Detailed job responsibilities will be provided upon application

Requirements:

• Bachelor/Master’s Degree in mechanical engineering, automation or relevant fields

• At least 8 years product and application experience in Construction/Engineering industry

• Good business negotiation and presentation skills

• Excellent communication skills with multinational customers and colleagues.

• Good leadership to lead technical team for business growth. Exhibit flexibility and agility

• Able to work independently with professional judgments, proactivity and team player spirit.

• Willing to take up challenging assignments

• Revit & AutoCAD proficient

• Candidates available immediately or short notice preferred

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

• Build blazing fast page speeds
• Build reusable components/primitives
• Delightful user interactions and affordances
• Work with the team to review PR, and make the codebase robust.

Job Requirements

• 5 years experience at tech startups with millions of DAUs
• Solid knowledge of TypeScript, and experience with Next.js, etc.
• Basic backend skills with Node.js, building REST APIs, working with databases
• Knowledge in Bitcoin and mining concepts
• Strong written and verbal communication skills

Interested applicants please send in your MS Word resume. Shortlisted candidates will be contacted very soon. Thank you.

Job Responsibilities:

• Lead Analog Circuit Design and Optimization:
  Direct the design and optimization of complex analog circuits, leveraging advanced schematic capture and simulation tools to achieve superior performance and reliability across diverse operating conditions.
• Drive Digital Standard Cell Library Development:
  Oversee the creation of high-performance, low-power digital standard cell libraries, ensuring alignment with stringent performance, power, and area specifications.
• Innovate Cutting-Edge Cell Architectures:
  Develop and implement advanced digital standard cell architectures, introducing innovative solutions to enhance design efficiency and meet evolving technological demands.
• Guide Layout Implementation:
  Provide strategic oversight to layout teams, ensuring accurate, efficient, and manufacturable physical implementations that adhere to performance and reliability goals.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s/Ph.D.) strongly preferred.
• Experience:
  10+ years in analog design and digital standard cell development, with expertise in deep sub-micron process technologies (12nm and below) and proven tape-out leadership.
• Advanced Technical Skills:Deep expertise in analog design, power optimization, and noise analysis.
  Mastery of tools such as Cadence Virtuoso, Spectre, and HSPICE for design and simulation.
  Extensive experience in digital standard cell library creation, optimizing for power, performance, and area.
  In-depth knowledge of deep sub-micron challenges, including layout optimization and power delivery strategies.
• Leadership and Communication:
  Demonstrated ability to lead cross-functional teams, mentor junior engineers, and foster innovation. Exceptional communication skills to articulate complex concepts and align multidisciplinary teams toward common objectives.

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

We are looking for some experienced Carpenter for our company with following conditions:

• Must have more than 5 years experience in Floor Tiling
• Must stay in company lodge/dormitory.
• Must willing to work after regular hour
• Management may ask for in person interview
• First 3 month will be consider as probation period

Responsibilities:

• Attend Customer Enquiry
• Provide Consultation
• Handling Renovation Projects

Training will be provided

Requirements:

• Passionate in Interior Design
• Pleasant & positive working attitude
• Strong in negotiation & presentation skills

Training will be provided

Job Highlights:

• On-Job Training
• Flexible working hour
• Attractive Incentives

We do accepts applicants with NO relevant experience as well. This position offers room for growth as well as potential career growth opportunities for all passionate candidates!

Who We Are

Synergraphic is a premier art+design studio and supplier for interior and architectural art glass solutions, bespoke lighting, installations, sculptures, features and murals for indoor and outdoor spaces. Striving to support ambitious architects, designers, brands and institutions globally to achieve breakthroughs in concept and design, Synergraphic seeks to use the fluidity of glass to create inviting features of all forms, functions, sizes and scales that are enduring and iconic to its clients’ personalities and brands.

Since 1986, Synergraphic has created hundreds of features in glass and mixed media for projects in more than 15 countries, with landmark locations including St Regis Singapore, Partners Monument at Taipei 101 and the Crystal Pyramid in Brunei.

Who We Are Looking For

At this stage of our business we are looking to grow strategically, and are focused on seeking out individuals in every department of the company who are passionate, sharp, initiated and willing to take on challenges to help drive the business forward together as a team. We are now searching for a highly-skilled Project Executive to run projects, contribute to Synergraphic’s growth and help us maintain our position as an innovative authority. The ideal candidate will have technical experience in the Building Materials trade as well as strong organisational and communication skills to deliver on our projects.

Your Responsibilities Include

• Overseeing projects from beginning to end
• Managing the budget and estimate costs
• Handling all preliminaries such as site inspection, measurements, and all other necessary prelim groundwork, sample submission, technical drawings and calculations.
• Sourcing for suppliers and materials to get the best quotes for purpose of submission and cost control
• Recording all correspondence/paperwork properly and thoroughly for all projects under your charge.
• Preparing documents and materials including samples for submission and presentation to and approval by client
• Liaise closely with internal Sales, Design, Contract and Production and Installation departments to deliver all tasks stated
• Upon confirmation of project, to liaise and co-ordinate with relevant parties including owners, architects, suppliers, designers, engineers, main and sub-contractors, our own site and factory personnel for work progress and timely deliveries.
• Resolve any problems that may arise
• Be available at all times for urgent calls and attendance required at site.
• Any other tasks assigned by Supervisor

Technical Skills

• Diploma in any Engineering discipline, Construction Management, related discipline in QS or certification in project management
• At least 20 years of relevant experience in Building Materials/Construction Industry
• Use of all relevant Microsoft software
• Able to read technical drawings and oversee production of drawings

Soft Skills

• Strong communication and negotiation skills
• Excellent planning and organisational abilities
• Good team player and adaptable to a dynamic environment
• Able to work well under stress and problem-solve
• Able to resolve conflicts and manage workers
• Able to multitask

Who We Are

Synergraphic is a premier art+design studio and supplier for interior and architectural art glass solutions, bespoke lighting, installations, sculptures, features and murals for indoor and outdoor spaces. Striving to support ambitious architects, designers, brands and institutions globally to achieve breakthroughs in concept and design, Synergraphic seeks to use the fluidity of glass to create inviting features of all forms, functions, sizes and scales that are enduring and iconic to its clients’ personalities and brands.

Since 1986, Synergraphic has created hundreds of features in glass and mixed media for projects in more than 15 countries, with landmark locations including St Regis Singapore, Partners Monument at Taipei 101 and the Crystal Pyramid in Brunei.

Who We Are Looking For

At this stage of our business we are looking to grow strategically, and are focused on seeking out individuals in every department of the company who are passionate, sharp, initiated and willing to take on challenges to help drive the business forward together as a team. We are now searching for a dynamic Operations Executive to manage daily operations, contribute to Synergraphic’s growth and help us maintain our position as an innovative authority.

As an Operations Executive, you will be responsible for managing daily operations by working with a cross-functional team. As someone overseeing the entire process, you will need to have big picture vision while maintaining an intimate knowledge of every department and various processes.

You will be responsible for ensuring production and project deadlines are met while maintaining quality control standards. You will also report to the CEO, helping to create policies, processes and strategies that help Synergraphic run efficiently and profitably.

The goal here is to mitigate operational errors on a daily basis to continue driving processes forward, building a strong foundation for Synergraphic to achieve greater growth for all.

Your Responsibilities Include

1. Assist Senior Operations Manager in the daily operations and manpower planning to ensure smooth operations of the workplace
2. Liaise with Clients/Suppliers/Sub-contractors and co-ordinate with project / retail teams to confirm and process orders
3. Forecast, plan and schedule manpower and materials for measurement, production and installation works to meet project requirements and deadlines
4. Update daily operations report
5. Perform inventory control and monitor stock movement
6. Prepare relevant documents including POs, quotations and claims
7. Perform verifications of suppliers/sub-contractors billings
8. Arrange incoming/outgoing documentations and schedules
9. Assist the management in developing strategic long-term plans to achieve strategic goals and objectives
10. Other ad-hoc assignments required

Technical Skills

• Min. Diploma in any Manufacturing or Engineering discipline, or related disciplines
• At least 5 years of relevant experience in Building Materials Industry
• Use of all relevant Microsoft software
• Experience with glazing materials and methods is preferred
• Experience in directing and supervising production personnel

Soft Skills

• Strong communication skills
• Able to lead and drive continuous improvement
• Able to negotiate and adapt to ongoing changes in manpower and material availability
• Excellent planning and organisational abilities
• Good team player and adaptable to a dynamic environment
• Able to work well under stress and problem-solve
• Able to multitask

Job Description & Requirements

• Experienced designers
• No experience personal are welcome too
• Training will be provided as long as you're willing to learn.
• Commission based
• Able to work on weekends/ public holidays base on client's requirements.
• Singaporean and PR only.

JOB SCOPE

• Schedule client meetings to understand their preferences
• Layout planning, Material and creative proposals
• Quotation preparations
• Clinch project deals
• Arrange and Schedule workers to ensure on-time project completion

Job Requirements

• Sales driven
• Service-oriented with excellent interpersonal,communication and presentation skills.
• Be willing to learn and improve
• Ability to understand clients' need
• Responsible and be on time for meetings
• Be proactive
• Travelling to jobsites to ensure work is being done
• Proficient in Sketchup, Photoshop, AutoCad and MS Office.

We are looking for passionate interior designers to join our elite team in converting spaces into functional design. You will have the opportunities to collaborate with our experienced designers who have the track records in creating world-class designs for our delightful clients.

A Day in the Life

• Responsible for timely delivery of services and solutions with professionalism and quality at all times
• Work with lead designers and design teams in supporting design implementation
• Transform creative ideas into functional design concept based on given briefs and ensure that it is in line with clients’ objectives
• Provide space planning and design conceptualisation
• Liaise with clients on quotation and design
• Prepare layout plans, perspective drawings, elevation plans and dimensional drawings
• Present design to client for approval
• Prepare design documentations and material selections
• Work closely with project team, suppliers, sub-contractors and clients during construction/implementation phase
• Perform other ad-hoc duties as required

What We are Looking For

• Diploma/Degree in Interior Design or Architecture
• 3 to 5 years of working experience in Retail and Commercial interior design environment
• Have a strong design sensibility and the technical ability to develop a project from concept to execution
• Possess excellent technical design skills for fixtures with an eye for details
• Proficient in key design tools such as AutoCad, Sketchup, Vectorworks,3D Studio Max, Illustrator, VRay and Photoshop
• Hands-on experience in producing detail drawing and 3D modeling
• Demonstrate a good knowledge of architectural production standards, detailing, building materials, building codes and construction
• Good knowledge space planning & technical design from approved design schematic.
• Creative, resourceful and demonstrate out-of-box thinking
• Team player with a positive attitude as well as the ability to work independently
• Excellent presentation skill as well as verbal and written communication skills

You will support the your Lead / Department Head

Responsibilities 

• You will be responsible for planning, preparing, and pitching the project cost to clients on behalf of SM inline with business plan of SM 
• Prepare and manage project cost estimates, budgets, and cash flow projections. 
• Prepare tender and contract documents, including bills of quantities, specifications, and drawings.
• Monitor project progress and track costs against budget, identifying and reporting any variances or potential issues. Control and mitigate risks related to cost overruns w.r.t estimates or savings plan
• Prepare and submit monthly progress reports to senior management and project stakeholders.
• Prepare claims for variations or additional works, and negotiate settlement with clients and contractors.
• Participate in project meetings, providing cost and contractual advice to project managers and other stakeholders.
• Maintain accurate and up-to-date project cost records, ensuring compliance with company policies and procedures.
• Prepare and present final accounts and claims, ensuring timely and accurate settlement.
• Participate in project meetings, providing cost and contractual advice to project managers and other stakeholders.
• You will maintain all the documents for total compliance related to design, contractors, legal and other matters as per company standards. Maintain accurate and up-to-date project cost records, ensuring compliance with company policies and procedures.
• Assist with the preparation of the documentation and the cover letters.
• Perform electronic registration, filing and distribution of documents.

What we Expect

• You are a QS professional with a minimum 7 years of relevant experience managing corporate/ workplace interior fit-out projects.
• Cost Estimation Skills: You have experience in creating accurate cost estimates for construction projects, using appropriate methods and tools, and taking into account factors such as labor, materials, equipment, overhead costs, and contingencies.
• Technical Knowledge: You possess a solid understanding of construction techniques, materials, and systems to accurately evaluate project costs and assess potential risks.
• Analytical Skills: You be able to analyze data, evaluate options, and make informed decisions on cost-effective solutions for construction projects.
• Communication Skills: You be able to effectively communicate cost-related information to various stakeholders, such as project managers, clients, and suppliers.
• Teamwork and Collaboration: You have experience working collaboratively with a team, including architects, engineers, and contractors to develop accurate cost estimates and proposals.
• Time Management: You be able to manage multiple tasks and projects simultaneously and meet deadlines in a fast-paced environment.
• Knowledge of Regulations and Standards: You be knowledgeable about relevant regulations and standards, such as building codes and safety requirements.
• Computer Skills: You have experience with relevant software applications, such as cost estimating software, spreadsheets, and project management tools. And you have experience in successfully adopting digital and technology initiatives.
• Attention to Detail: You have a keen eye for detail, ensuring that all costs are accounted for and accurately reflected in project estimates.
• Cost Control: You be able to identify potential cost-saving opportunities and implement measures to control project costs while maintaining quality standards.
• You have a diploma or degree in quantity surveying/ construction management or a related discipline.
• You have the knowledge of individual trades and subcontractors relevant to interior fit-outs
• You are tech-savvy, and have experience in successfully adopting digital and technology initiatives.
• You have the ability to work in a fast paced environment without compromising on quality and customer satisfaction.
• You work well under pressure and have the ability to work independently with minimal supervision.
• You will be a subscriber to the Company’s core values: teamwork, integrity and excellence.

To find out more visit www.spacematrix.com

PAND Design is experiencing rapid growth, offering each employee substantial responsibility, autonomy, and opportunities to take initiative. Team members are encouraged to contribute to developing processes or programs that enhance the company's success while fostering meaningful personal and career growth.

Minimum Qualification

• Minimum 3 year of experience in a similar role doing Business Development within the corporate design or adjacent industries.
• Proven account management capabilities
• Confidence in speaking with high level executives and delivering presentations/proposals
• Strong self disciplines, demonstrates resilience, and doesn’t take rejection personally but turn rejections into opportunities.
• Confidence & Talkative
• Creative thinking with high curiosity individual

About the job

Businesses partnering with PAND vary in size, needs, and budgets, meaning there's no one-size-fits-all solution. Your expertise in business development and sales, along with your strong communication and analytical skills, play a crucial role in driving the growth of both new and existing partners. Leveraging your ability to build and maintain relationships, you'll oversee all aspects of business development and client management. You'll collaborate closely with team members and Directors to craft compelling pitches and secure new partnerships. The role also offers attractive performance-based incentives.

Responsibilities:

1. Lead Generation: Identify and pursue new clients. Set up meetings with Project Directors/Managers to understand client needs.
   
2. Client Relationship Management: Propose and execute marketing initiatives. Build trust with key decision-makers in Singapore and regional offices.
   
3. Business Development: Engage in cold and warm callings with potential clients.
   
4. Brand Promotion: Network with industry professionals. Promote PAND’s brand in the industry.
   

RESPONSIBLE FOR DESIGN, EXECUTION AND MANAGING PROJECTS. ABLE TO INTERFACE WITH CLIENTS, CONSULTANTS AND SUB-CONTRACTOR. EXCELLENT ABILITY TO MANAGE INTERNAL AND EXTERNAL TEAMS.

MIN. 1 YEAR LOCAL EXPERIENCES. MUST BE EXPERIENCED WITH ARCHICAD & PHOTOSHOP SOFTWARE.

GRADUATED FROM UNIVERSITY WITH DEGREE CERTIFICATION PREFERRED.

We are looking for some experienced Carpenter for our company with following conditions:

• Must have more than 2 years experience in carpenter works
• Must stay in company lodge/dormitory.
• Must willing to work after regular hour
• Management may ask for in person interview
• First 3 month will be consider as probation period

Who We Are Looking For

A passionate sales executive who derives great joy from introducing innovative and beautiful glass finishes and solutions to high-end residential, commercial and hospitality projects.

Working in our team you will have the opportunity to offer a wide range of products and services, including more complex customised glass features that would require some design input through working with your colleagues in the Design Team.

The role requires an eye for design, ability to learn quickly about the medium of glass, and a strong motivation to win more customers and sales both locally and overseas.

Key Responsibilities

• Formulate and implement sales strategies to strengthen and expand customer base
• Maintain existing client relationships and build new ones
• Build and maintain good rapport with Synergraphic Design’s clients, including architects, interior designers, contractors and owners
• Attend preliminary sales and site meetings to obtain drawings and design brief from client
• Keep abreast of current design and market trends and identify how our solutions meet them
• Be involved in the preliminary creative process leading to the final presentation of proposals, including visuals and models
• Prepare marketing kit prior to presentation of proposals to Synergraphic Design’s clients including samples.
• Maintain client account relationships while work order is being processed and fulfilled by our project and production team to ensure overall successful project completion to clients’ satisfaction

Technical Skills

• Diploma/Advanced/Higher/Graduate Diploma in Business, Interior Design or equivalent
• Preferable 3 years sales experience in related design / high-end building material / soft furnishing fields
• Proven track record of success in the sales cycle from plan to close
• Must have a good eye for design
• Ability to read architectural drawings will be an advantage
• Proficient in MS Word, Excel and PowerPoint

Soft Skills

• Passionate about design and connecting with people, with a pleasant disposition, self-motivated, good at problem-solving and result-oriented
• Not afraid to deal with difficult clients and able to manage clients despite any challenges faced
• Strong ability to negotiate

Who We Are Looking For

We are looking for an experienced and empathetic HR and Admin Executive who is excited to grow and maximise the potential of our team and support our visions for culture.

You will be instrumental in the smooth running of the entire organization and will help us keep our people happy and productive.

Job Responsibilities

• Planning HR and administration activities annually
• Setting, monitoring, and achieving HR targets
• Managing recruitment, onboarding, and exit procedures
• Overseeing the payroll function
• Ensuring full compliance with company policies and procedures
• Managing employee relations
• Carry out performance reviews for employees
• Plan and execute training and wellness programmes
• Running the office and facilities management functions

Required Skill Set

• At least a Diploma in Human Resources or Management
• At least three years’ experience in HR
• Expert business and organizational planning ability
• Experience in team leadership
• Successful experience in employee relations
• Excellent written and verbal communication
• Strategic thinking ability
• Proven ability to multitask

• At least 2 years and above on experience in commercial renovation works
• Able to prepare tender document for Design & Build project. BQ, Tender specification, Form of Tender, Drawings (by Designer)
• Able to quantity take off for multiple projects fast and accurately
• Able to source for materials, procure and deliver
• Able to source for new material, new suppliers and sub-contractors when required
• Able to perform site measurement & inspection with sub-contractor to certify work done to date
• Able to communicate fluently with client’s representative, landlord and authorities
• Experience in material market rate
• Experience in all installation market rate
• Good in negotiating prices
• Experience in F&B tender will be an added advantage

· Service clients’ accounts and achieve sales targets

· Manage client’s expectations on project expectations

· Develop project execution strategy

· Obtain quotes from suppliers for materials/fittings for calculation of cost

· Prepare quotation and submission of tender/quotation

· Prepare project budgets and manage cost control based on clients’ budget

· Oversee kick-off meeting with clients

· Submit schedules, concept designs and sample materials for clients to review

· Update organiser/client on the commencement of work

· Coordinate with suppliers to ensure work is completed according to planned schedule

· Oversee handover of project and coordinate with clients regarding defects rectification

· Arrange for invoice billing to clients

· Ensure good client relationship and as primary point of contact for Clients' Project Management team

· Manage specialist design support services and take part in conversion process

· Perform any other adhoc duties

We are looking for energetic and passionate design engineers to join our Central Engineering Group and be part of an elite team responsible for the development of foundation IP for AI products including memory compilers, logic cells and custom macros of all types on the bleeding edge of process technology. We have multiple positions at all experience levels.

Available Job Responsibilities

• Design and build memory or circuit blocks at the gate or transistor level
• Simulate and analyze the circuit design using transistor level simulators
• Extract the layout and perform post-layout simulations and verification
• Floorplan physical implementation and layout integration of design components
• Integrate characterization flow to extract timing and power information
• Develop scripts to automate characterization flow, simulations, and verification
• Specify and verify various behavioral and physical memory models
• Document the design specifications, behavioral description, and timing diagrams
• Help specify silicon test plan and correlate silicon to simulation data

Preferred Skills

• Good understanding of transistor level circuit behavior and device physics
• Good understanding of signal integrity analysis, EM/IR analysis, and reliability analysis
• Proficiency in running simulators, writing automation scripts, and are tools savvy
• Understanding of memory behavioral and physical models is a plus
• Expertise in memory circuit design is a plus
• Understanding of DFT schemes and chip level integration is a plus
• Good communication, interpersonal, and leadership skills
• Motivated, self-driven and good at multi-tasking
• Passion for solving complex problems and willingness to learn

Qualifications

• Requires a BS in Electrical or Computer Engineering
• Some years of relevant experience is preferable
• Fresh graduates are encouraged to apply

Design Coordinator cum Drafter

Responsibilities

· Assist designers with project coordination, research and data collection

· Managing design files, documents, and archives

· Creating and editing design materials such as presentations, reports, and graphics

· Conducting research and gathering inspiration for design projects

· Assisting with design concept development and brainstorming

· Ensuring design consistency and quality across projects

· Responsible for general drafting work including the detailing of structural, architectural and other related drawings

· Ensure drawing and proposal drawings are in accordance with specifications

· Prepare all coordination drawings, detail, 2D & 3D shop drawings and as-built drawings etc

· Coordinate and assist Project teams in all on-site technical/engineering matters

Requirements

· Recognized Degree in Architecture or equivalent

· Well versed in BIM

· Good knowledge of AutoCad 2D/3D

· Good communication (both oral/written) as well as presentation skills

. Minimum 2 years’ work experience in construction & design trade in Singapore

Responsibilities:

- Proficient in AutoCAD software
- Auto-cad skill in drawing update and revision, record-keeping and control & update of Drawings.
- Prepare assembly and detail drawings on the basis of the information and
instruction provided
- Prepare and assists in drawing revisions are required
- Able to work independently with minimum supervision
- Responsible for the project team drafting activities
- Ability to multitask and manage several projects at a time
- Any other duties as assigned.

Requirements:

- Previous document control support or related work experience preferred.
- AutoCAD and MS Office, Outlook, Word, Excel skills.
- Diploma / Degree or equivalent