• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

The intern of 6 months is largely expected to work in an office environment from 8.30 am to 6.00 pm on weekdays and may also be required to travel out of the office for meetings. On occasions, the jobholder may need to work outside official hours on weekends to support the running of events.

We are seeking an individual who is either currently pursuing or has completed an IT-related diploma such as Diploma in Applied AI & Analytics or Diploma in Information Technology or Design for User Experience (DDUX) from Singapore Polytechnic or Republic polytechnic. The intern will play a crucial role in the planning and implementation of our Learning Management System and the integration of AI technologies into our systems.

Project Specification Including Learning Points for a Polytechnic Intern Involved in the LMS Tender Preparation at Mendaki

Project Overview

The objective of this project is to prepare a tender document for a new Learning Management System (LMS) that will significantly enhance the delivery of educational programs at Mendaki. This will be achieved by conducting thorough needs solicitation and analysis, which will also provide a practical learning opportunity for a polytechnic intern involved in the project.

Objectives

- To gather and analyse detailed functional and technical requirements for the new LMS.

- To enable the polytechnic intern to gain hands-on experience in project management, stakeholder engagement, and technical documentation.

- To ensure the LMS aligns with Mendaki’s strategic educational and technological goals.

Scope

- The project encompasses the solicitation of needs, comprehensive requirement analysis, and the drafting of a detailed tender document for procuring the LMS.

- Incorporation of specific learning objectives for the intern to ensure a meaningful internship experience.

- Engagement with various stakeholders to refine the requirements and expectations for the LMS.

- Learn new tools to create educational content and support some administrative duties at work

Phases of the Project with Intern Learning Points

Phase 1: Needs Solicitation

(A) Objectives:

- Collect comprehensive user requirements from diverse stakeholders.

- Provide the intern with experience in designing and conducting surveys and focus groups.

- Identify limitations of the current system and desired improvements.

(B) Activities

- Assist in preparing and distributing surveys, conducting interviews under supervision.

- Participate in and document focus group discussions.

- Analyse feedback to help identify critical system requirements.

(C) Learning Points

- Gain insights into effective data collection methods.

- Understand the importance of stakeholder input in project specifications.

- Develop communication and analytical skills.

Phase 2: Requirement Analysis

(A) Objectives

- Translate collected data into actionable system requirements.

- Categorize requirements to prioritize system functionalities.

- Train the intern in requirement analysis and documentation.

(B) Activities

- Collaborate with IT specialists to assess and document technical and functional requirements.

- Help in prioritizing requirements based on impact and feasibility.

- Draft sections of the requirements document.

(C) Learning Points

- Learn how to perform qualitative and quantitative data analysis.

- Develop skills in technical writing and specification documentation.

- Understand system design and architecture principles.

Phase 3: Drafting the Tender Document

(A)Objectives

- Develop a comprehensive tender document that includes all technical specifications and evaluation criteria.

- Educate the intern on the legal and compliance aspects of tender preparation.

- Ensure the document meets all regulatory and organizational requirements.

(B)Activities

- Draft sections of the tender document focusing on technical and functional requirements.

- Define and document vendor qualifications and submission guidelines.

- Revise the draft based on internal feedback.

(C) Learning Points

- Experience in drafting formal procurement documents.

- Understanding of compliance and procurement processes.

- Skills in revising and finalising professional documents based on feedback.

Timeline

Scheduled to begin on Start Date and complete by [End Date], structured to facilitate the intern’s learning process throughout the project duration.

Success Criteria

- Accurate documentation of user needs and system requirements leading to a robust tender document.

- Positive stakeholder feedback on the tender document and project execution.

- Effective learning outcomes for the intern as evaluated through regular reviews and feedback sessions.

- Learn new tools for educational content development and support some administrative tasks

This project specification ensures a structured approach to soliciting needs and preparing a tender document for an LMS at Mendaki while providing a rich learning environment for a polytechnic intern, integrating professional development with meaningful project contributions.

Other Tasks

1.Administrative Support: On the administrative side, the intern could manage schedules, arrange meetings, take meeting notes, and prepare materials for presentations related to project management. This helps in keeping the project timeline on track and ensuring effective communication among team members.

2.Educational Content Development: As part of CDLT, the intern could also assist in developing training materials or guides based on the new system functionalities introduced, facilitating smoother adoption by end-users across the organisationJob Summary:

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The Research Fellow will work closely with the Principal Investigator, Dr. LIN Yiliang, on the research project of bio-interface design between living systems and materials for healthcare and sustainable applications.
• The Research Fellow will help to develop living materials system integrating functional hydrogels with microorganisms, perform material characterization, and investigate the real-world applications.

Job Requirements

• A PhD degree in a relevant area, e.g., Chemical Engineering, Material Science and Engineering, Chemistry, Biomedical Engineering;
• Good publication record;
• Experienced bio-interface design, construction of living materials, materials characterization, and cell culture.
• Any experience with 1) animal experiments, 2) advanced characterization techniques, and 3) soft matter mechanics and physics, is a plus
• This position is available from Jan 2025

DUTIES & RESPONSIBILITIES

• Repair and maintain, equipment and machines of cold room and ice maker
• Installation of chiller room,freezer room and troubleshooting chiller unit,freezer unit and ice maker
• Troubleshoot systems to determine causes and rectify.
• Service and repair kitchen equipment at work shop such as chiller, freezer ,ice maker ,bracing pan, water boiler, combi oven, dough mixer, spiral mixer and etc
• Prepare quotation and evaluate costing and propose to client.
• Ability to run a team and be responsible for installing and maintaining Cold-room projects.
• Dismantle and replace worn or defective equipment.
• Perform mechanical overhauls and refrigerant reclaiming.
• Install expansion and control valves, compressor, condenser and other components
• Top up gas to the systems
• Keep record of repairs and job schedules.
• Maintain tools and spare parts in good order.
• Practise safe and healthy working behaviour and report hazards and unsafe act.

Candidate Requirements

• Bachelor’s degree in Mechanical Engineering, HVAC Engineering, or a related field.
• Proficiency in CAD and AUTOCAD software.
• Strong knowledge of refrigeration, insulation, and energy-efficient design principles.
• Class 3 driving license is an advantage, but not necessary.
• Able to speak and write English.
• Knowledge of electrical wiring and mechanical works.
• Job requires heavy lifting, climbing and handling of materials
• Able to perform overtime and stand by for emergency
• Manage a team with proper guidance and team framework

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability to [email protected]

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

A global energy efficiency firm is looking for a Senior Electrical Engineer (Control Systems Design) in Singapore. The incumbent will be responsible for supporting and executing research projects related to electrical, power and controls systems (inverter controller, PLC etc.).

Responsibilities:

• Conduct research works pertaining to electrical engineering and control system (PLC)
• Continuous development of energy management system
• Guide and lead junior engineers in research and commercial works
• Engage with clients/partners on research topics and testing purposes
• Stay relevant to industry and innovate new solutions
• Lead junior engineers in research projects
• Provide on-site technical support on electrical and control systems capabilities and limitations

Requirements:

• Bachelor's or Master's Degree in Electrical Engineering or any relevant disciplines
• 5+ years of working experience in research or development for electrical or control systems
• Familiarity in low carbon energy, smart grid, battery (BESS), utilities system would be a plus
• Candidates from engineering consulting background would be preferred
• Programming skills to support research works
• Led a team of junior engineers before
• Experience in control theory and mathematical optimization is a plus

If you are interested, please apply with your latest CV. Only shortlisted candidates will be contacted.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for a minimum of 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

As a Marine Design Engineer, you will own engineering responsibilities for all Cavotec’s shipboard shore power retrofit projects. Type of retrofit can be either turnkey, repair and upgrading. Project execution takes place either during voyage or at shipyards, or at times, both.

Shore power/ HVSC/ Alternative Maritime Power (AMP)/ Cold-ironing system enables vessels to connect to shore power while at berth, hence minimizing emissions and noises from the ship’s auxiliary engines. The retrofitted system will be integrated with ship’s existing electrical distribution and necessary instrumentation and monitoring systems.

You will ensure the system design is in accordance with contract specifications, Class rules, and all applicable ship-type and port-specific regulations. You will also participate in the selection of equipment suppliers and service providers for all necessary 3rd party activities. You will have close interactions across all departments of the organization.

Responsabilities:

• Lead the design of shore power system retrofit solutions on vessels.
• Support Project Manager and sales teams throughout retrofit tender stage.
• Incorporate Cavotec’s shore power products on all retrofit solutions. Propose modifications of Cavotec’s products when required.
• Lead all technical discussions and review all technical proposals submitted by external stakeholders.
• Collaborate with marine retrofit team in ensuring retrofit solution is practical and cost-effective during implementation during voyage and/or at shipyard.
• Support marine retrofit team in the selection and management of equipment suppliers and service providers. This includes attending FAT of 3rd party equipments.
• Where required, to appoint and manage the deliveries of engineering contractors.
• Develop shore power retrofit engineering competencies within the organization.

Requirements:

• Degree in Electrical Engineering
• At least 3 years of working experience in the engineering department of shipyards, marine retrofit organizations or shipping companies
• Well-versed in IACS class regulations for merchant ship design
• Resourceful in the ship repair market
• Excellent communication skills
• Fluency in English

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 4 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Summary of the Job:

· Responsible for mechanical design tasks of given project and ensure delivery of the machine according to customer requirements.

Job Description:

· Prepare design concept according to customer requirement & compiling quotation from new/existing supplier at RFQ stage.

· Lead the qualification of new part from new supplier with Project buyer. Work with Quality Assurance to qualify the new supplier when required.

· Execute design according to customer requirements and to finish the jobs within given schedule and budget.

· Review and confirm technical specification with customer.

· Develop detail & assembly drawing according to Sys-Mac drafting standard.

· Designer to draw schematic diagrams for Assembly.

· Loading drawings and the files into in-house manufacturing share drive for their retrieval.

· Print drawings to verify the correctness before handling to Admin Assistant to route to in-house manufacturing to produce the parts.

· Prepare Bill of Material (BOM).

· Request PDA from planner and prepare Material Requirement List (MRL) of the project and release to Planner/Project Engineer.

· Liaise with respective Control Engineer for the requirements of electrical circuit and software development of the project.

· Liaise with the Project Engineer and assist on execution of assembly and buyoff of the project as and when necessary.

· Initiate Change Notice Request (NCR) for change of part design.

· Report progress and project related issues to the Sr. Design Engineer.

· Prepare of Machine Operation Manual & Maintenance (Mechanical) for the project.

· Maintain proper project documentation.

· Other duties as and when assigned.

Job Requirements:

· Degree/Diploma in Mechanical Engineering or equivalent.

· Min. 2 years relevant experience in Automation machine design.

· Ability to create and interpret mechanical drawings, carry out design calculations and component detailed drawings.

· Able to perform assigned tasks independently or through team activities.

· Self-motivated, highly resourceful and organized.

· Knowledge of SolidWorks 3D CAD software.

· Good team player.

Job Description:

• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Coordinate with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Resolve any construction issues on drawings and liaise closely with relevant departments as well as the authorities, to ensure consistency with contractual technical specifications and statutory rules and regulations.
• Report on work progress during meetings.
• Attend site inspection with required.
• Any other tasks that assigned by reporting officer.

Job Requirement:

• Possess a Degree in Engineering (Civil)
• Experience in handling LTA Infrastructure design works
• At least 8 years design experience
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Candidate with strong relevant years of experience will be considered for senior positions

EV-Electric (EVe) Charging Pte Ltd is a subsidiary of the Land Transport Authority of Singapore (LTA), which coordinates the national effort to undertake the electrical infrastructure upgrades and deployment of electric vehicles charging points (EVCPs) primarily in Singapore’s residential carparks.

As a Design Manager, Infrastructure, you will manage electrical-related and other site matters in the overall EV electrical infrastructure upgrade development as well as support various operational functions in EV charger deployment.

Your responsibilities include but not limited to:

· Design development of EV electrical infrastructure. Develop tender specifications and requirements for electrical infrastructure upgrade.

· Review the EV electrical infrastructure upgrade proposals. Provide specialist advice on potential electrical-related issues in the infrastructure upgrade proposal and recommend solutions to optimize upgrade projects on cost and time

· Conduct regular checks on various sites to ensure upgrade works are executed properly

· Support ad hoc building assessments. Provide assessment of potential costs to upgrade electrical infrastructure to support EV charger deployment

Requirements:

· Tertiary qualification in Electrical Engineering with at least 5 years of relevant working experience and at least 2 years of experience in the Design of Electrical Infrastructure.

· Mentally sharp and a strong acumen to identify potential and occurring site issues and recommend solutions to the team

· Ability to build and maintain a positive relationship with various stakeholders.

· Strong electrical engineering background with at least 7 years of relevant work experience, preferably including involvement in upgrading electrical infrastructure (e.g. substations)

· Good command of both written and spoken English language. Knowledge of spoken Mandarin is an advantage

· Computer literacy in Microsoft Office software

• Analysis of project requirements and propose the solutions accordingly.

• Development of system technical specifications.

• Development of system architectures and integration with 3rd parties' systems.

• Technical interface with customers and other contractors.

• Realization of testing and commissioning works onsite.

• Network troubleshooting for wired and wireless systems both.

• Technical support to systems once into operation after commissioning.

• Onsite testing and commissioning.

Requirements:

•Tertiary qualification in Electrical and Electronics Engineering

•Minimum 6 years experience working on various communication systems technologies such as fibre-optic transmissions, digital trunked radio, public address and telephony, CCTV surveillance, access management and travel information systems.

•Experience in implementing railway-related projects.

Responsibilities:

To drive the technology masterplanfor digital transformation efforts

Architecture and System Design

• Design and implement scalable and efficient solution architectures to support research technology systems
• Ensure alignment with overall IT, security and data management policies
• Using your wide-ranging technical expertise, you will review current architectural system and identify solutions to ensure the company stays up-to-date with industry standards and best practices
• Conduct gap analysis and develop strategies for addressing deficienciesin current systems
• Create and maintain documentation for system architectures, designs, and processes to ensure clarity and continuity

Technical Point of Contact / Solutioning

• Analyse business requirements and translate them into technical specifications and effective solution designs
• Provide technical guidance and leadership to vendors and internal stakeholders, ensuring best practices in software development, integration, and deployment
• Define standards and guidelines for technology use across the organization
• Identify and assess emerging technologies and industry trends, recommending tools and solutions

Business Support

• Identify and resolve technical issues in collaboration with system/database administrators, development/support vendors, the IT operations team, and business stakeholders
• Assist in the training of end-users on new systems and processes, providing ongoing support as needed
• Prepare and present architectural/solution proposals to executive management and stakeholders

Requirements:

• Minimum Degree in IT, Project Management, Business or related fields
• Experienced in Digital Transformation Technical Projects and Vendor Management
• Act as an IT Technical Internal Voice
• Knowledge of application design, development and outstanding project management
• Familiarity with DevOps/DevSecOps methodologies and tools
• Understanding of application architecture and design principles
• Proven experience with system integration and related technologies/frameworks (e.g., REST, SOAP, API management)

Strong understanding / proficiency as below will be advantage:

• Tools and technologies such as microservices, enterprise architecture frameworks
• On-premise and cloud computing
• Software development methodologies, including Agile and DevOps practices
• Database design and data management principles
• UI/UX best practices.
• Solutions Architec Microsoft Certified: Azure, AWS
• Knowledge in any of the following: MSSQL, MSAccess, VBA, Power Platform, Python
• Experience developing database driven applications with HTML/5, CSS/3, Bootstrap/4, JQuery, PHP (Laravel framework), Apache/NGINX
• Familiarity with the Market Research / Data Analytics industry
• Understanding of data protection legislation and/or cybersecurity

Interested candidates, do submit your resume in MSWord to [email protected] or contact 62251232

Job Description:

1. Preparation of design calculation sheets, design & construction drawings, and any other
related documentation
2. Receive approvals from relevant Authorities and/or Employers
3. Prepare concrete design calculations such as bridges, drainage culverts, and retaining
walls
4. Prepare steel structural design calculations such as steel bridges, and temporary sheet
piles
5. Prepare settlement/consolidation calculations
6. Prepare slope stability calculations
7. Prepare construction planning & management for the works such as reclamation,
dredging, soil improvement, soil investigation, ground compaction, piling, steel
fabrication, and concrete, etc.

Job Requirements:
1. Bachelor of Engineering in Civil/Geotechnical Engineering
2. Design experience such as piling foundation, drainage, Earth Retaining Stabilizing
Structure (ERSS), soil improvement design (PVD, DCM, sand pile, gravel pile), ECM, Gravity wall, FEM, Slope stability
3. Familiar with the latest design standards such as Eurocode, British standards, ACI, ASCE, PIANC, CIRIA etc.
4. Well-versed in software e.g. Auto CAD, Microsoft Word, Excel, Power Point, Geoslope, PLAXIS etc.
5. Contract duration of 3 years
6. 5.5 days' workweek
7. Project site located at Woodlands

• preparing reports, designs and drawings (steel structure)
• making calculations about drawing designs
• selecting appropriate construction materials
• providing technical advice
• obtaining planning and/or building regulations approval
• liaising with relevant professional staff such as architects
• monitoring and inspecting work undertaken by contractors
• administering contracts
• managing projects
• inspecting properties to check conditions/foundations.
• analyze project goals and perform structural calculations
• review shop drawings and provide feedback to colleagues
• perform field visits and write reports detailing project viability and progress
• make recommendations for materials to use and safety measures to take

Job Description

• Industry/ Organization Type: Type: Automotive, Heavy Machinery and Aerospace Solutions
• Position Title: Design Engineer (Aero Engine Component Repair Design & Repair Development)
• Working Location: Shenton Way
• Working Hours: Monday – Friday, 9am – 6pm
• Salary Package: Up to $8,500
• Duration: Permanent

Key Responsibilities

• Lead the development of repair processes for Rolls-Royce Trent Engine Components.
• Spearhead and support the creation and development of necessary tooling and inspection requirements, including manufacturing routers and process instructions (e.g., data cards, recording forms, setup plans).
• Demonstrate First Article Inspection for assigned repair schemes according to AS9102, AS 130000, and Rolls-Royce SARRe Guidelines.
• Collaborate closely with Manufacturing Engineers and Customer Team Specialists to meet monthly repair development targets.
• Support Manufacturing Engineers in addressing technical and operational challenges related to Rolls-Royce, ensuring thorough follow-through until approval and shop operation handover.
• Assist in the preparation of Source Approval Validation packages and other necessary documentation for the industrialization and approval of Rolls-Royce-controlled repair schemes.
• Facilitate effective interactions with Engineering, Operations, Quality, Suppliers, and other support teams during repair industrialization, ensuring alignment with Safety, Quality, Delivery, and Productivity goals.
• Communicate effectively with vendors and internal functions to ensure timely and budget-compliant execution of repair development actions.
• Ensure all engineering designs and technical data are accurately documented, providing a strong technical/historical foundation for future reference and meeting customer/end-user needs.

APPLY NOW!!!

• Bachelor’s degree in Mechanical, Aeronautical, Material, or a related Engineering discipline.
• Minimum of 5 years in repair development or repair design
• Thorough understanding of Rolls-Royce repair schemes, engine manuals, special process manuals, and overhaul procedures.
• Proficient in Rolls-Royce component repair processes
• Knowledgeable in manufacturing and inspection tools and processes such as heat treating, thermal spraying, bead and shot peening, arc welding, wide gap brazing, and machining.
• Expertise in GD&T and tool/fixture design applications within repair settings.
• Specialized knowledge in the repair of Nozzle Guide Vanes and Stator Vanes would be advantageous.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70613 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

We are seeking a talented and motivated Product Design Engineer to join our dynamic team. As a key member of our product development group, you will play a crucial role in designing innovative products from concept to production. You will collaborate closely with cross-functional teams to ensure that our products meet high standards of quality, functionality, and manufacturability.

Responsibilities:

• Lead the design and development of new products, from initial concept through to production release.
• Create detailed 3D models, drawings, and specifications using CAD software (e.g., SolidWorks, AutoCAD).
• Conduct feasibility studies and analysis to evaluate product designs for performance, safety, and manufacturability.
• Collaborate with manufacturing and quality assurance teams to address design-related issues and optimize production processes
• Research and draft blueprints, engineering plans, and graphics.
• Develop test prototypes.
• Identify solutions to improve production efficiency.
• Use design software to develop models and drawings of new products.
• Maintain existing engineering records and designs.
• Assess all engineering prototypes to determine issues or risks.
• Estimate cost limits and budgets for new designs.
• Supervise the manufacturing process of all designs.
• Coordinate with other engineers, management, and the creative department.
• Obtain Ingress Protection certification

Requirements:

• Bachelor’s degree in Mechanical Engineering, Product Design, or related field.
• Proven experience in product design and development, preferably in Dones technology
• Proficiency in CAD software (SolidWorks preferred) and other relevant engineering tools.
• Strong understanding of manufacturing processes and materials.
• Excellent problem-solving skills and attention to detail.
• Ability to work effectively both independently and as part of a team.
• Strong communication skills to effectively collaborate with internal teams and external partners
• Knowledge and experience in designing, fabricating and sending the products for IP rating certification.

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Industry: Heavy Industry/Equipment/Machinery

Location: Tuas

Position: Project Manager (Job ID: 19317)

Working hour: Monday - Friday, 8:00 - 17:00

Our client, the process and construction arm of a major Japanese logistics company.

Job Description:

➤Key responsibilities for this role include being involved in various project stages which include basic engineering design and detailed design, site and technology assessment, technical consultation.
➤Is also tasked to manage the budget, schedules and quality. To oversee the delivery and use of materials, tools, and equipment, and the quality of construction, staff productivity, and safety.
➤The candidate will lead and collaborate with the design and engineering team to deliver on key responsibilities in an assignment under tight deadlines.
➤Engineering projects management through structured planning, ensuring set timelines, budgets and resource allocation for successful execution.
➤Cultivate and maintain strong client relationships, ensuring satisfaction with project deliverables.
➤Act as the primary point of contact with clients in addressing and resolving issues and managing expectations.
➤To lead engineering team and engineers assigned, adhering to quality standards, codes and project requirements.
➤Coordination and engagements with vendors and OEMs to specify technical specifications and data sheets.
➤To ensure that works are carried out according to specifications, drawings without compromising on quality and safety.
➤Provide technical expertise in designs, ensuring adherence to industry standards, codes and regulations.
➤Review and approve design documents, drawings, and specifications.
➤Collaborate with multi-disciplinary design teams to optimize solutions and address technical challenges.
➤Preparation of Technical specifications and Package P&IDs for all the mechanical equipment.
➤Prepare and review/check of the design Interfaces with other disciplines and Packages.
➤Develop and maintain engineering standards, specifications, and best practices for the designs.
➤Review of vendor offers, preparation of technical evaluation report, technical portion of the purchase order.
➤Review and Input drawing/document list for package, design review and validation records, Bill of quantities, Vendor drawing review.
➤Provide technical support and guidance to engineering and project team.
➤Proactive in continuous improvement for engineering processes.

Job Requirements:

➤ Bachelor’s degree in Mechanical Engineering or related field
➤ At least 5 years of experience in the field of plant engineering design and construction experience in petrochemical, chemical and industrial plants. Consistent career experience in the engineering department.
➤ Experience in the design of engineering systems and equipment including boilers, turbines, compressors, pumps, and heat exchangers.
➤ Track record of successfully delivering chemical & industrial projects on time and within budget.
➤ Proficiency in MS Office and engineering software tools such as Smartplant 3D, Caesar II or similar plant engineering tool and AutoCAD.
➤ Strong knowledge of industrial plant design principles, process and operation philosophy
➤ Well-verse with industry standards and best practices for design, maintenance, and reliability.
➤ Excellent problem-solving skills and ability to work effectively in cross-functional teams.
➤ Effective communication and interpersonal skills, with the ability to work collaboratively in a multidisciplinary team environment and with the Clients and Stakeholders.

We regret that only shortlisted candidates will be notified. Other applications will be updated to our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed on the terms of our Privacy Policy, and consented to us collecting, using, retaining, disclosing your personal information to the prospective employers for their consideration.

Effective from 1 October 2020 under the new Employment Agencies (EAs) Licence Conditions,

EAs will be required to collect the personal data (e.g. NRIC number number for overseas candidates) of applicants referred to employers for permanent or contract job positions of at least six months with a fixed monthly salary of S$3,300 and above.

PDPA requirements on collection, use, and disclosure of personal data would not be applicable to EAs that are collecting such information as it is a regulatory requirement by Ministry of Manpower.

Please find Privacy Policy Agreement from the below link.

http://www.pasona.com.sg/privacy.html

Thank you for your understanding and co-operation

Lee Xin Hui

EA Registration No: R22108046

Pasona Singapore Pte Ltd

1 FINLAYSON GREEN ＃09-02 SINGAPORE 049246

EA License No:90C4069

[Order ID: 478461]

Responsibilities:

• Design and develop software for automated semi-conductor process equipment.
• Improve equipment performance through CIPs and other development initiatives.
• Support field work to upgrade and resolve customer issues.
• Any other ad-hoc duties assigned.

Requirements:

• 5 years’ experience in a managerial capacity overseeing software development and automation control in Semiconductor industry.
• Experienced in programming on Windows (XP and above) environment.
• Highly versatile in VC++, MFC, SQL and OOP.
• Good knowledge in developing multi-threaded control software, SEMI SECS/ GEM equipment connectivity standard and Software Development Life Cycle.
• Hardware experience in using Servo, Stepper Motion Controller, Analog Device and High Speed I/O.

Please include the following for us to conduct an effective job matching for you:

• Earliest availability date/ notice period
• Expected & Last drawn salary

To Apply, please kindly email your updated resume to [email protected]

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:
https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Victoria Loh Jie Li
EA Personnel Reg. No.: R1330197
EA Licence No.: 07C5771

We are seeking experienced Java Developers to join our client team in developing robust, scalable applications. Your primary focus will be backend development, working with Java Core, RESTful services, and relational databases.

• Working Hours: Mon-Fri
• Working Location: Central (currently hybrid working arrangement)
• Salary Package: Up to $7,200 (basic) + AWS + attractive bonus (commensurate with experiences)

Responsibilities:

• Develop and maintain Java-based applications and services.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Write clean, efficient, and testable code.
• Troubleshoot, debug, and upgrade existing software.
• Participate in code reviews and optimize performance.
• Ensure high levels of security, performance, and scalability.

Requirements:

• Proven experience as a Java Developer (3+ years).
• Strong knowledge of Java, Spring Framework, and Hibernate.
• Experience with RESTful services and microservices architecture.
• Familiarity with relational databases (e.g., MySQL, PostgreSQL).
• Proficiency with Git, Maven, and build tools.
• Strong problem-solving skills and attention to detail.

Preferred Skills:

• Experience with cloud platforms (AWS, Azure).
• Familiarity with CI/CD pipelines.

Why Join Us?

• Competitive salary and benefits package.
• Opportunities for professional growth and development.
• Collaborative and innovative work environment.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:
• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Elane Yap Theng Yu- R1989397
ScienTec Consulting Pte Ltd - 11C5781