• Electrical Supply (MNC company)
• Basic $3000 - $3500
• *AWS + Bonus + 14 days AL
• Mon-Fri (8.15am-5.45pm)
• Working location: Tuas
• Company transport provided: CCK, Bukit Batok, Boon Lay

Responsibilities

• Inspect and test incoming and outgoing parts according to established procedures and maintain quality records.
• Report quality issues to the QA Manager and relevant department heads, ensuring non-conforming products are separated.
• Authorize the rejection of unsatisfactory parts and approve the release of conforming parts for delivery.
• Perform routine factory tests on switchboards and oversee testing and commissioning on-site or aboard vessels.
• Assist in achieving quality objectives, recommend solutions for issues, and verify their implementation.
• Ensure safety compliance, proper calibration of instruments, and maintain good housekeeping in the QA Department.

Requirements

• Min ITE/ Diploma in Electrical Engineering

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

We're seeking a skilled Quality Engineer to join our team, focusing on automated testing for scalable applications. As a Quality Engineer, you'll play a critical role in ensuring the reliability, performance, and scalability of our products.

Key Responsibilities

• Develop and execute comprehensive testing strategies to guarantee product quality, reliability, and scalability.
• Collaborate with cross-functional teams to validate product integration, performance, and uptime, ensuring seamless deployment and user experience.
• Design, develop, and maintain automated testing frameworks using Jest (TypeScript) for unit testing and Playwright (TypeScript) for integration and end-to-end testing.
• Implement API stress testing using Locust (Python) to identify performance bottlenecks and ensure system resilience.
• Analyze test results, identify trends, and deliver detailed reports to stakeholders, informing product development and optimization.
• Collaborate with developers, product managers, and stakeholders to create testable requirements, resolve defects, and ensure effective testing.
• Stay up-to-date with advancements in testing methodologies, tools, and frameworks, applying this knowledge to improve testing efficiency and coverage.

Requirements

Essential Qualifications

• 3+ years of experience in quality engineering, focusing on automated testing for scalable applications.
• Proficiency in TypeScript, with experience using Jest for unit testing and Playwright for integration and end-to-end testing.
• Strong knowledge of API testing tools and frameworks, with hands-on experience in Locust or similar performance testing tools.
• Proven ability to design efficient test cases, think critically about edge cases, and ensure code reliability.
• Excellent problem-solving skills, with the ability to communicate testing strategies, findings, and recommendations to technical and non-technical audiences.

Nice to Have

• Experience with applications leveraging generative AI technologies.
• Interest in data science, artificial intelligence, and machine learning

• Design and Development:
  • Design, model, and prototype robotic systems, mechanisms, and components using CAD software (e.g., SolidWorks, AutoCAD).
  • Develop control systems for robotics, integrating sensors, actuators, and motors into functional designs.
  • Create detailed technical specifications, design documents, and test plans for robotics systems.
• Testing and Optimization:
  • Conduct performance testing of robotic systems and components to ensure they meet functional requirements.
  • Analyze test results, identify areas for improvement, and refine designs for optimal performance.
  • Troubleshoot and resolve design, mechanical, and electrical issues.
• Collaboration:
  • Collaborate with electrical, software, and manufacturing engineers to ensure seamless integration of robotic components.
  • Participate in brainstorming sessions and design reviews to innovate and improve robotic designs.
• Research and Innovation:
  • Stay up-to-date with the latest trends and advancements in robotics, automation, and related technologies.
  • Apply cutting-edge design principles and technologies to create high-performance, cost-effective robotics solutions.
• Documentation and Reporting:
  • Document design processes, test results, and modifications for future reference and continuous improvement.
  • Provide regular progress reports and presentations to management and stakeholders.

We are seeking a highly skilled QA Engineer to join our team, with experience in both the oil & gas and semiconductor industries. The successful candidate will play a crucial role in ensuring that our products and processes meet the highest quality standards and comply with industry regulations

Job Description

• Quality Assurance: Oversee and manage quality assurance processes to ensure compliance with industry standards and company policies in both oil & gas and semiconductor fields.
• ISO Audits: Conduct internal and external ISO audits (including ISO 9001) to maintain certifications and ensure adherence to ISO standards.
• Process Improvement: Identify areas for improvement, develop corrective actions, and implement solutions to enhance quality and operational efficiency.
• Documentation: Maintain comprehensive records of quality control procedures, audit findings, and corrective actions.
• Training: Provide training and support to staff on quality standards, ISO procedures, and industry best practices.
• Collaboration: Work closely with other departments to integrate quality assurance into all processes and projects.

Job Requirement

• Education: Bachelor’s degree in Engineering, Quality Management, or a related field.
• Experience: Minimum of 5 years of experience in quality assurance within the oil & gas and semiconductor industries.
• ISO Expertise: Proven experience in conducting ISO audits, particularly ISO 9001.
• Skills: Strong analytical skills, attention to detail, and proficiency in quality management tools and software.
• Certifications: Certified ISO Lead Auditor or similar certification is preferred.
• Communication: Excellent written and verbal communication skills.

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The Candidate will be working on dynamic modelling and simulation of the powertrain of a full electric tug vessel, mainly using MATLAB/Simulink. The simulation models will be used to investigate the steady state and transient behaviour of the ship’s electric propulsion system.

Key Responsibilities

• Development of dynamic models of the ship’s electrical propulsion system including energy storage systems.
• Investigate steady-state and transient behaviours of an all-electric ship’s electrical system in various operational scenarios.
• Carry out mission-specific electrical power consumption analysis
• Electrical propulsion and ESS design optimization.
• Any other duties as assigned by the supervisor.

Job Requirements

• Bachelor's Degree or above in the areas of Electrical Engineering, Mechanical Engineering or Marine Engineering
• Other relevant disciplines are welcome to apply
• Background in programming languages and related research project experience is ideal

Job Description

• Optimize Shopee Ads core advertising strategies, such as traffic selection, smart bidding, ranking strategies and auction mechanisms.
• Provide solutions to long-term challenges like cold start, stability, and ecosystem development for the platform.
• Participate in the development and iteration of Ads algorithms by using Machine Learning.
• Enhance the efficiency of automated delivery products, combining intelligent product selection with full-chain optimisation to improve ads performance.
• Deeply understand buyer and seller demands to create incentive-compatible, mutually beneficial advertising strategies and products.
• Continuously improve the monetisation efficiency and user experience of Shopee’s advertising products, increase monetisation efficiency and driving the healthy, sustainable development of Shopee advertising

Requirements

• At least 3 years of relevant experience in algorithm-related roles
• Minimum 2 years of hands-on experience in one or more of the following areas: machine learning, recommendation systems, computational advertising, pattern recognition, data mining, or artificial intelligence.
• Hands-on experience with machine learning frameworks such as PyTorch, TensorFlow.
• Bachelor’s degree in Computer Science, Engineering, or a related technical field, or equivalent practical experience.
• Strong communication skills, collaborative team spirit, and a product-focused, data-driven mindset.
• Experience in ecosystem construction, monetisation efficiency, or mechanism design is preferred
• Prior experience in e-commerce companies is preferred

Duties and Responsibilities

• Develop web application prototypes, new technologies and products.
• Build highly responsive and scalable web applications.
• Build fully functional web applications with interfaces to backend database, writing clean and maintainable code.
• Build fully functional, clear, testable backend RESTful/SOAP APIs with interfaces to backend database.
• Resolve defects, and generally ensure accuracy, integrity, interoperability and completeness of system.
• Build regularly automated tasks to perform functions specific to the project requirements.
• Build interfaces to exchange data between various third-party systems.
• Resolve defects, and generally ensure accuracy, integrity, inter-operability and completeness of system.
• Troubleshoot and debug to optimize performance.
• Prepare and deliver software related documentation.
• Provide timely updates to the web and backend application.
• Provide support and maintenance of existing software web application projects.
• Respond to users in a timely manner.
• Work with fellow software engineers to coordinate the development effort and ensure overall consistency in the coding and the interfacing between various components and sub-systems in order to achieve a full functioning solution.
• Work with consultants to craft user stories, assess feasibility and build demonstration showcases.
• Work with consultants and senior engineers to develop test scenarios to ensure full functionality of system before user acceptance test.
• Work with customers and partners, both internal and external where there will be collaboration for knowledge transfer.

Essential Skills and Experience

• At least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.
• Fresh graduate, or up to 2 years of relevant working experience
• Tech Stack Requirements: ASP.NET Framework 4.5 or .NET Core, C#, HTML, CSS, Javascript, SQL Server
• Good problem solving, logical reasoning, planning and time management skills
• Effective communication and technical writing skills
• Strong interest in software engineering
• Willingness to learn on the job, and constantly eager to learn new skills on one’s own
• Ability to work well in teams and also independently in a fast-paced environment
• Familiarity with mobile application development (with Xamarin) is a plus.
• Familiarity with backend API development (with .NET technologies) is a plus.
• Domain knowledge in accounting, or procurement, or inventory management, or leasing, or computerized maintenance management, or billing, or resource booking, or Enterprise Resource Planning is a plus

Only shortlisted candidates will be notified

Job Description

-Contribute to high-quality research and development work in TCOMS laboratory through physical experiments including:

o design of scaled physical test models, such as maritime vessels, offshore rigs, marine renewable platforms, and aquaculture systems for testing in TCOMS Ocean Basin.

o generation of detailed design, production, assembly, and as-built drawings of test models.

o Work with a team of engineers and technicians on model fabrication and modification, calibration, instrumentation, and experimental setup.

o enhance the measurement of models? behaviour and response by use of appropriate sensors.

o document design processes, methodologies, and results.

o contribute to process enhancements for improved efficiency of research work.

-Perform research in the following areas:

o Offshore hydrodynamics

o Coastal Protection

o Loads, motions and response analysis of Marine & Offshore platforms and floating structures

o Fluid-structure interactions

· Collaborate with internal teams, affiliated research institutes and other relevant stakeholders in proposal preparation and submission.

-Any other duties as assigned by supervisor.

Job Requirements

-Bachelor's/Master's Degree in Civil Engineering, Mechanical Engineering, Marine Engineering, Offshore Engineering, or other related disciplines.

-Preferably 3 years of relevant research/industry experience with competent knowledge in some of the following areas:

o Offshore engineering, marine engineering, hydrodynamics, naval architecture.

-Prior knowledge in the following numerical methods/software/programming languages will be an advantage:

o CAD software such as SolidWorks, Rhino, AutoCAD

o Engineering tools such as WAMIT, SESAM and OrcaFlex

o Programming codes such as Python, MATLAB, or equivalent.

o StarCCM+, OpenFOAM

-Model experiments in wave flumes, wave tank or ocean basin.

-Good interpersonal and communications skills.

-Ability to adapt and work effectively as members of a team.

-Good command of written and spoken language.

-Resourceful and self-driven with a high degree of professional integrity.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Minimum Viable Product Studio (MVP Studio) of NUS Enterprise, Technology Transfer and Innovation, supports NUS startups in their prototyping journey by providing industry know-how and technical guidance in the productization of intellectual property. We are seeking a versatile mechanical design engineer with market-proven expertise in product design and development, to join our team as a Master Engineer (Mechanical Design).

As a Master Engineer (Mechanical Design), you will guide NUS startups through the mechanical design and development process. You will support the prototyping phase of NUS startups, including generating mechanical concept proposals and mechanical architecture, implementing detailed design using 3D modelling and 2D drawings, and ensuring full design integration at system level. You will collaborate closely with internal cross-functional teams and external vendors to deliver robust mechanical design solutions.

Duties and Responsibilities

Prototype Design & Development

• Generate mechanical concepts and provide mechanical architecture.
• Implement detailed design utilizing 3D modelling and 2D detailed drawings.
• Establish modular design and full product BOM structure.
• Create sub-assembly test plans and test reports.
• Ensure design robustness and full design integration at system level
• Collaborate with ID to implement human-centric styling solutions for mechanical designs.

Technical Advisor to NUS Startups for Mechanical Design & Development

• ​​​​​​​Facilitate startups in prototyping their mechanical designs.
• Provide technical guidance and design expertise throughout the development lifecycle.
• Collaborate effectively with internal team members, startups, NUS faculty members.
• Communicate technical concepts and solutions to non-technical team members and stakeholders.

Vendor Management

• Work with vendors on DFM for the required mechanical designs.
• Coordinate with vendors to ensure delivery timelines and quality standards are met.

Qualifications

• Bachelor’s degree/ Master’s degree in Mechanical Engineering.
• Market-proven mechanical 3D design experience in consumer products, automotive/industrial products, or medtech/healthtech instrumentation, with at least 12-15 years’ combined experience.
• Proficient in 3D CAD modelling, preferably in Pro-Engineer/Creo and Solidworks.
• Experience in casting, plastics molding, sheet metal design, and 3D printing.
• Advance geometrical dimensioning and tolerancing.
• Good knowledge in automation and mechanism design.
• CFD/flow simulation in analyzing flow/thermal characteristics.
• Completed and led at least 5 complete product design life cycle.
• Good knowledge in control systems.
• Strong troubleshooting skills at module and system levels.
• Proven team manager with excellent teamwork and collaboration skills, with the ability to mentor and guide startup teams

What you will do

[Physical Design]

• Work for physical design and development activities of MediaTek’s Ghz ARM-based microprocessors
• Involve in activities encompass physical design and analysis of complex and timing-critical microprocessor partition blocks and
• Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing and power optimization

[STA/Power Signoff]

• Involve in activities encompass Static Timing Analysis on advanced process nodes (28nm, 20nm, 16nm & beyond)
• Technical disciplines include STA, and analysis of complex and timing-critical microprocessor
• Work closely with RTL function designers and physical designers to optimize design components such as timing and power
• Design Methodology (1):
• This position is in charge of design methodology from RTL-Synthesis-DFT-PNR-STA-PI.
• Specific skill set is: able to boost productivity using either programming or EDA solution
• AI learning Programming is a big plus

What you will bring

• Bachelor/Masters Degree in Electrical and Electronic Engineering/Computer Engineering
• Good with concept of digital design
• Good with communication, team work and scripting skills
• Understanding of RTL2GDS flow is a plus

Location: One North, Singapore

Important Note: This advertisement is not for immediate hiring but is intended to identify suitable candidates for future openings in this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate. We are work-life balance and friendly to employees with various benefit.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

Roles & Responsibilities

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations.

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent.
• Must be CCNA certified, CCNP preferred.
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools.
• Experience in IPv6 and Data Centre operations an advantage.
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses.
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.

Sulzer is a leading engineering company with a proud heritage of innovation. Join our global team to grow your expertise and develop innovative solutions that enable a prosperous and more sustainable society.

Purpose of the Job

Sulzer Chemtech’s expanding licensing portfolio is delivering exciting new low-carbon solutions to customers as they navigate the ever-changing world of sustainability. Our client base faces challenges from multiple fronts and are turning more and more to technology-providers for a roadmap that will lead them to a successful future. This requires us to be more creative and more responsive than ever before as we work as a global team to propose and sell our product, technology, and service portfolios. We are looking for a Senior Technical Sales Engineer that understands customer needs in providing technical support and crafts winning proposals in support of sales strategies with the help of team members and technology experts.

Your main tasks and responsibilities:

• Will be part of Global Technical Sales team led by Technical Sales Director
• Responsible for generating proposals independently most of the time working with guidance from Technical Sales Director
• Study customer’s specifications: review, interpret, understand, and identify bid requirements.
• Prepare complete deliverables for the full technical proposal producing simulations, material balance and utility requirements, Process Flow Diagrams, equipment sizing and design, Capital Cost Estimation
• Attend customer proposal review meetings as needed, presenting the technical details as required.
• Support commercial sales team based in China with technical inputs for customer sales visits and travel with them as and when needed.
• Develop opportunities with a focus on increasing market share and identifying new opportunities for Sulzer;
• Correct usage and timely update of CRM tool
• Drive the company’s risk management process for quoted opportunities
• Deliver Order intake results to meet annual targets.

To succeed in this role, you will need:

• Bachelor Degree in Chemical Engineering / Business or Equivalent.
• 5 to 8 years of experience in refinery, petrochemical, and downstream industry with basic understanding of process configuration
• Proficient with process simulation and design software’s like PROII, HYSYS, Aspen Plus etc.
• The ideal candidate has relevant sales experience in licensing and is passionate about technology, customer relationships, and results.

Sulzer is an equal opportunity employer. We believe in the strength of a diverse workforce and are committed to offering an inclusive work environment.

We are proud to be recognized as a Top Employer 2024 in Brazil, China, Germany, Switzerland, the United Kingdom and the United States.

We are looking for Project Engineer to join our fast and growing team. You will be working with stakeholders on the following:

Job Description

• Execute and manage the project and responsible for the quality of work produced by the team and sub-contractor(s).

1. Projects
2. Documentation
3. Acceptance

• Co-ordinate, plan, conduct and manage the various activities within the project team, with the subcontractor(s), customers and document the progress of the project.

1. Project Schedule & Planning
2. Team Management
3. Risk Management
4. Prepare and Conduct PMR, PDR & CDR
5. Project Meeting
6. Knowledge sharing and conduct training
7. Prepare Operator and Maintenance Manual
8. Prepare and Conduct Installation, Checkout, Inspection and Testing
9. Conduct Factory Acceptance Test and On-Site Acceptance Test

Requirements:

• Degree with at least 3 years or Diploma with at least 5 years in Engineering related field
• Strong organisation skills and meticulous
• Team player with good communication and interpersonal skills
• System knowledge such as RFDF, EOIR & Radar will be added advantage
• Able to travel within a short notice is a plus
• Candidates with strong background will be considered for role of "Project Manager"

Interested applicant can click on 'Apply' or send updated CV to [email protected]. We regret to inform that only short-listed applicants will be notified.

Job Description

• Prepare project schedule in either MS Project or Oracle Primavera P6.
• Cost loading to the baseline programme
• Monitoring Critical path and Earn Value Management (EVM) analysis
• Prepare impact analysis for EOT claims
• Prepare working programme and float analysis
• Document control for relevant EOT event
• Monthly progress report and resource monitoring
• Handle on the change control

Requirements

• Degree/Diploma in Civil Engineering/Mechanical Engineering or any other engineering field with minimum 3 years of experience in project planning roles.
• Possession with CAPM or PMP certification will be an added advantage.
• Good analytical, communication and problem-solving skills
• Team player
• Strong analytical, critical, and logical thinking skills.
• Able to work independently with minimal supervision.

About the Role:

To maintain the service education system for trainers and distributors. This includes training on repair processes, installation, maintenance, and troubleshooting, as well as introducing new products by preparing training schedules and materials. The role also involves promptly tracking technical inquiries and providing remote support to other Business Centres and distributors, ensuring that all administrative documentation is accurate and complete to enhance efficiency and service quality. Additionally, it includes planning and reviewing the Quality Management System to improve repair quality in the repair centre.

Roles and responsibilities:

• ·Conduct in-service training on medical devices and related products for trainers in other Business Centres and distributors, including:

o Repair processes (assembly and disassembly)

o Installation and maintenance processes

o Troubleshooting

• Prepare service training and manage the introduction of new product repairs, including training materials and schedules.
• Establish a service education system for medical devices and related products for engineers in other Business Centres.
• Address technical inquiries and provide technical support (installation, maintenance, etc.) to Business Centres and distributors, both remotely and on-site (e.g., at hospitals).
• Ensure proper documentation, notification, tracking, and follow-up on all technical inquiries.
• Support Business Centres and distributors with all service and technical-related inquiries and activities.
• Escalate issues to higher-level support when necessary and act as a contact point between Business Centres and headquarters.
• Plan and review the Quality Management Systems of repair centers to secure and enhance repair quality.
• Perform any other tasks as assigned.

About Olympus:

Our purpose at Olympus is to make peoples’ lives healthier, safer and more fulfilling. We do this through innovation. As a technology pioneer, we design and deliver solutions across our Medical division that make a positive contribution to society.

Our products are used to capture the medical and diagnostic images of our world, from the microscopic to the endoscopic. They are instrumental in furthering research, and for travelling inside the human body to help diagnose, treat and prevent illness.

Our commitment to customers and our social responsibility is the cornerstone of everything we do.

Why work at Olympus?

At Olympus, we are dedicated to fostering a high-performing culture, a collaborative environment, and enabling everyone to shine. Our common values of Patient Focus, Integrity, Innovation, Impact and Empathy, form the foundation of our culture and guide our behaviour, where our people feel like they are making a difference every single day.

Not only will you benefit from a meaningful, rewarding and challenging career, you will have access to a range of benefits:

• A competitive salary package including AWS and Variable Bonus
• Hybrid home office work arrangements
• 18 days of annual leave in your first year
• Health and Wellbeing initiatives (Annual Medical Checkups, Flu Vaccinations, Dental benefits, and Employee Assistance Programs)

What we are looking for:

• Diploma or Degree in any Electrical/Electronics/Mechanical Engineering Discipline
• At least 3 years of related experience in the medical device industry is highly preferred.
• Experience in technical support, including technical training.
• Experience with lean manufacturing and Six Sigma is preferred
• Strong hand-on skills and good eyesight.
• Willingness to travel to the Asia Pacific region if required.
• Proficient in the use of MS Office and its applications.
• Possess strong communication and troubleshooting skills.
• Able to work in a team environment and collaborate with staff across different age groups.
• A team player with enthusiasm for learning and the ability to work with minimal supervision.
• Strong troubleshooting and analytical skills.

Apply Now:

To submit your interest in this opportunity, select “Apply for this job”.

In the meantime, follow us on:

· LinkedIn - Olympus APAC

· Company website - www.olympus.com.sg

A site engineer is responsible for the planning, design, and construction of civil engineering projects, such as roads, dams, bridges, and buildings. They are responsible for many aspects of a construction project, including:

• DesignSite engineers evaluate the soil conditions, topography, drainage, and environmental considerations to ensure the design is implemented successfully. They also draft blueprints.
• ConstructionSite engineers manage the construction teams, subcontractors, and equipment on the site. They also ensure that the construction adheres to safety regulations and project timelines.
• Quality assuranceSite engineers perform quality assurance tests to ensure that the materials and workmanship meet the required standards.
• Technical adviceSite engineers provide technical advice during construction work and identify and resolve technical issues.
• CollaborationSite engineers collaborate with clients, construction crews, architects, designers, and other stakeholders.

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Join our team within Chemtech division in Sulzer Singapore Ltd as Senior Applications and Sales Engineer to help us take our business to the next level.

In this role you will be accountable for:

• Prepare technical proposals and commercial tenders project
• Interface with customers and monitor progress of projects
• Co-ordinate projects with head office, regional offices and agents
• Prepare and co-ordinate all proposal activities with Regional Offices and Local Headquarters
• Carry out tender reviews and order reviews
• Handle technical clarification for all proposals. Work as an integral part (with technology, engineering, production) in developing proposals, pricing strategies and customer presentations
• Prepare price calculation and tender documentation
• Ensure that the specifications offered to the customer are within the capability and capacity of the company
• Ensure that the customers’ requirements are adequately conveyed and reflected in engineering, manufacturing and installation
• Follow-up projects monthly and update MIS daily
• Undertake sales and marketing of Sulzer Chemtech products and services throughout Asia Pacific region
• Control all correspondences and documentation relating to project. Co- ordinate and utilize inter-department resources where necessary.
• Ensure that all technical and commercial specifications are received, clarified and agreed with customer at order stage.
• Prepare complete project and engineering files
• Arrange project handover meeting with Project Management and Engineering for larger projects and non-standard
• Initiate Customer Complaint Reports to ensure that with complaints are properly and efficiently dealt with
• Feedback information to customers on quality improvements on product and changes, as and when necessary
• Supervise/Check the work of junior Applications & Sales Engineer if required.

To succeed in this role, you will need:

• Degree in Chemical Engineering
• 5 ~ 10 years of sales and customer services experience preferably in Chemical & Petrochemical / Oil & Gas industry.
• ProII / Aspen Simulation Program is optional, but not mandatory
• Microsoft Skills
• Distillation theory
• Fair knowledge of chemical separation processes knowledge Business travel (~30%), particularly in the Asia Pacific region.

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

83% of our employees recommend Sulzer as a good place to work and we are proud to be recognized as a Top Employer 2023 in Brazil, China, Switzerland, United Kingdom and United States. So come and join our story, starting today!

We're seeking a skilled Full Stack Software Engineer to contribute to the development and implementation of Litmus & Sentinel, our AI guardrails products. As a Full Stack Software Engineer, you'll play a key role in ensuring the responsible and ethical use of AI technologies.

Key Responsibilities

• Collaborate with cross-functional teams to design, develop, and integrate Litmus & Sentinel into products, ensuring seamless integration and high uptime.
• Contribute to the development of frontend and backend modules, leveraging the latest technologies and best practices.
• Conduct regular code reviews, performance evaluations, and technical assessments to maintain high standards of product quality and reliability.
• Work closely with stakeholders to understand requirements and translate them into technical solutions.
• Stay updated on industry trends, emerging technologies, and best practices in AI ethics and governance.

Requirements

Essential Qualifications

• 3+ years of full-stack software engineering experience in building scalable products.
• Experience with NextJS (TypeScript) and building API backend using frameworks such as NestJS (TypeScript) and FastAPI (Python).
• Exposure to cloud-based application development on AWS.
• Demonstrated ability to write efficient code and build software.
• Strong problem-solving skills and critical thinking.

Nice to Have

• Experience in generative AI-enabled applications.
• Interest in data science, artificial intelligence, and machine learning.

Job Roles and Responsibilities:

· Interacts closely with Client/Customers regarding their technical questions.

· Supervised daily operations in the laboratory and ensures that all activities are align with the required standard/specifications and safety protocols.

· Prepares report on all laboratory tests, this include analysis and interpretation of the results.

· Contributes in business development opportunities for new services or new methodologies.

· Willing to conduct various laboratory tests (if necessary) I.e. Triaxial test, Consolidation test, resilient modulus test and soil classification test.

· Maintaining the equipment, ensures all equipment are calibrated with required accuracy and functioning properly.

· Ensures all the report are submitted to client as per scheduled deadlines.

· Monitor the status of all received sample from sample preparation to report submission.

Job Requirements:

· Bachelor’s degree in Civil Engineering, Geotechnical or a closely related field.

· Ability to work independently and as part of a team.

· Strong understanding of soil mechanics principles and behavior.

· Proficiency in Microsoft office specially at MS Excel.

· No experience but have strong knowledge/interest in geotechnical materials are welcome to apply.

Role: Laboratory Engineer (Geotechnical/soil testing)

Job Roles and Responsibilities:

· Interacts closely with Client/Customers regarding their technical questions.

· Supervised daily operations in the laboratory and ensures that all activities are align with the required standard/specifications and safety protocols.

· Prepares report on all laboratory tests, this include analysis and interpretation of the results.

· Contributes in business development opportunities for new services or new methodologies.

· Willing to conduct various laboratory tests (if necessary) I.e. Triaxial test, Consolidation test, resilient modulus test and soil classification test.

· Maintaining the equipment, ensures all equipment are calibrated with required accuracy and functioning properly.

· Ensures all the report are submitted to client as per scheduled deadlines.

· Monitor the status of all received sample from sample preparation to report submission.

Job Requirements:

· Bachelor’s degree in Civil Engineering, Geotechnical or a closely related field.

· Ability to work independently and as part of a team.

· Strong understanding of soil mechanics principles and behavior.

· Proficiency in Microsoft office specially at MS Excel.

· No experience but have strong knowledge/interest in geotechnical materials are welcome to apply.

The L1 IT Support Engineer (IT ServiceDesk) is accountable for providing a high level of satisfaction among students and staff by providing first-level support for all GESS standard software and hardware. This position entails the diagnosis and assessment of end-users' technical requirements, utilizing sound discernment to promptly address and resolve any issues that may arise.

The engineer's responsibilities encompass the identification, investigation, and resolution of technical issues, as well as the prompt and effective response to support requests from students and staff through in-person, email, and phone interactions. It is anticipated that they will document, chart, and monitor all issues to ensure that they are resolved in a timely manner.

Additionally, they may occasionally offer technical training and support to GESS personnel and students. The engineer is instrumental in ensuring that the team remains dedicated to providing exceptional support and satisfaction, and it is imperative that they adhere to the GESS values and expectations for customer service.

Furthermore, they may be obligated to oversee initiatives as necessary, thereby facilitating the continuous enhancement of technology services and support strategies within the educational environment.

Key Accountabilities

First-Level Troubleshooting and Support:

· Provide initial troubleshooting by guiding users through in person, via email and IT ticketing system, and over the phone while also offering remote desktop support using Remote Desktop Software.

· Deliver quality service to students and staff in all assigned tasks, consistently upholding GESS values.

· Ensure timely and effective solutions for any technical issues that may arise with GESS technology.

Incident Management:

· Log and track support calls in the designated GESS system(s).

· Prioritize and escalate tickets as required to maintain high levels of customer satisfaction.

· Identify trends in support calls and develop documentation to address frequently occurring issues.

Communication and Reporting:

· Report problems and issues promptly, notifying management of any increasing trends, unusual activities, or repeated issues.

· Provide regular updates to customers on the status of ongoing resolution efforts.

· Attend daily and weekly meetings as requested or required to stay informed and aligned with team objectives.

Continuous Improvement:

· Recommend improvements for technology or systems, including procedural steps, increased training, and enhanced documentation.

· Access and utilize software updates, drivers, knowledge bases, and FAQs to assist in resolving end-user issues.

Collaboration and Support:

· Assist other teams in initiating, designing, and managing effective support solutions as required by the school’s needs.

· Collaborate with internal second-level support and departmental tech teams (Divisional Tech Help Center) for escalated or reassigned tickets.

Technology Development and Testing:

· Support the development and testing of new technologies to ensure operational integrity and functionality.

· Proactively communicate ideas, expectations, and goals while working with others to achieve desired outcomes.

Service Level Agreement (SLA) Management:

· Follow up on tickets approaching SLA deadlines to ensure timely resolution and avoid SLA failures.

Other Duties:

· Perform additional tasks as assigned by the Director of Technology, adapting to the evolving needs of the school environment.

Knowledge and Experience

Education:

· Diploma in Information Technology, Computer Engineering, or Business Information Technology.

Technical Skills:

· Proficient in Windows OS and Apple products.

· Experience with Microsoft Office 365 and computer troubleshooting.

· Knowledge of Mobile Device Management (JAMF or Intunes) is a plus.

· Familiarity with ID Card and digital signature systems is advantageous.

Experience:

· At least three years of IT support experience, preferably in an educational environment.

Soft Skills:

· Strong customer service orientation and effective communication skills.

· Positive attitude, initiative, and the ability to work independently and under pressure.

· Team player with a cooperative mindset.

Adaptability:

· Willingness to learn and adapt to new technologies and evolving IT environments.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer who will be responsible working on a project on cyber security and privacy issues for IoT and cyber-physical systems.

Responsibilities:

• Design and develop techniques that detect attacks on IoT/CPS;
• Perform analysis and simulations to validate designs;
• Implementation and development of demos;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• BEng/BSc/BTech in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of cyber security would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are looking for a Research Engineer who will be responsible working on a project on cyber security and privacy issues for IoT and cyber-physical systems.

Responsibilities:

• Design and develop techniques that detect attacks on IoT/CPS;
• Perform analysis and simulations to validate designs;
• Implementation and development of demos;
• Assists with the editing and preparation of manuscripts, reports and presentations;
• Participate in presentations and demos for exhibiting work at appropriate events

Qualifications

Requirements

• BEng/BSc/BTech in Electrical Engineering, Computer Science or a related field;
• Programming experience and knowledge of cyber security would be a plus;
• Possesses research background with ability to read and understand methodologies in research papers;
• A good team-player;
• Open to Fixed Term Contract