Job Responsibilities:

• Strategize and Lead Low-Power Design Initiatives:
  Define and execute strategies for achieving low-power, high-performance physical design. Lead the development of innovative workflows and methodologies to minimize power consumption while ensuring design reliability and scalability.
• Oversee Full-Chip Floor Planning and Routing:
  Provide technical leadership in full-chip floor planning and place-and-route activities. Optimize chip area, performance, and power metrics, while mentoring junior engineers in advanced methodologies.
• Architect Power Distribution Networks:
  Design and validate robust power networks to meet demanding performance criteria. Conduct power integrity analysis to address IR drop, noise, and power grid optimization, ensuring alignment with low-power objectives.
• Drive Timing Closure and Integrity Signoff:
  Lead timing closure efforts across cross-functional teams. Address complex timing violations, optimize critical paths, and ensure successful power and signal integrity signoff for final design verification.
• Champion Physical Verification Processes:
  Oversee DRC and LVS verification, resolving escalated issues and ensuring designs comply with layout and manufacturing rules. Guide the team through pre-tape-out readiness.
• Facilitate Cross-Team Collaboration:
  Act as a key liaison among RTL, analog, and verification teams. Drive alignment between physical design and overall architecture while addressing challenges and providing technical guidance to stakeholders.
• Promote Continuous Improvement:
  Champion the adoption of emerging tools, techniques, and methodologies. Drive workflow innovations to enhance efficiency, scalability, and quality of low-power physical design.

Requirements:

• Educational Background:
  Bachelor’s degree in Electronics, Computer Science, Electrical Engineering, or a related field. Master’s or Ph.D. preferred.
• Experience:
  10+ years in physical design with expertise in high-performance, low-power semiconductor technologies (12nm and below). Proven tape-out success and leadership experience are essential.
• Advanced Technical Expertise:
  Deep expertise in full-chip floor planning, place-and-route, and physical verification (DRC and LVS). Advanced knowledge of power network architecture, IR drop, and noise analysis. Strong proficiency with timing closure processes and STA tools like PrimeTime.
• Software and Tools Proficiency:
  Extensive experience with industry-standard tools such as Synopsys IC Compiler, Cadence Innovus, and scripting languages like Perl, TCL, and Python.
• Place-and-Route Leadership:
  Expert-level experience in advanced place-and-route strategies for performance and power optimization.
• Leadership and Mentorship:
  Proven ability to lead teams, mentor junior engineers, and manage cross-disciplinary collaboration in a fast-paced environment.
• Preferred Expertise:
  Experience in deep sub-micron technologies (7nm, 5nm, etc.), multi-voltage designs, advanced low-power techniques, and design-for-manufacturing (DFM). Familiarity with emerging semiconductor trends is a strong advantage.

Job Responsibilities:

• Circuit Design and Simulation:
  Design and optimize analog circuits using schematic capture and simulation tools to meet performance targets under various conditions.
• Digital Standard Cell Libraries:
  Develop high-performance, low-power digital standard cell libraries optimized for speed, power, and area.
• Innovative Cell Architectures:
  Propose and develop novel digital cell architectures to enhance efficiency and performance.
• Collaboration with Layout Teams:
  Work with layout designers to ensure accurate and efficient physical implementations while maintaining manufacturability standards.

Qualifications:

• Education:
  Bachelor’s degree in Electronics Engineering, Computer Science, or related field. Master’s or Ph.D. preferred.
• Experience:
  5+ years in high-performance, low-power analog design with tape-out and deep sub-micron process experience (12nm and below).
• Technical Skills:Proficient in analog circuit design, noise analysis, and power optimization.
  Skilled in tools like Cadence Virtuoso, Spectre, and HSPICE for schematic capture and simulation.
  Experienced in developing digital standard cell libraries for performance and efficiency.
  Strong understanding of deep sub-micron challenges and solutions.
• Communication:
  Excellent collaboration and presentation skills to work effectively with cross-functional teams and articulate complex concepts clearly.

RESPONSIBILITIES

• To prepare intermediate engineering drawings, layout and equipment arrangement to support the Engineers in conducting their engineering planning, design and construction work. This includes consulting engineers on design and supporting them to and drafters in the development of engineering drawings.
• The main job challenge is to ensure design and drafting assignments are delivered to a high quality, using prevailing engineering design procedures, standards and codes.
• Maintaining Master Drawing Register.
• To ascertain that all inputs are delivered to engineering subcontractors in accordance with the MDR avoiding delay and rework.
• 3D Model Development - To maintain model accuracy.
• Perform Drafting Check - To maintain accuracy, quality, completeness & conformance for drafting and designing for the project standards.
• Project proposal document preparation - To provide technical support to project management/ proposal team.
• Design and drawing activities - To deliver the drawings by maintaining quality, complying with HSE standards and meeting the project deliverables schedule.
• Meetings Coordination - To resolve the engineering issues with help of drafting team and supervisors.
• Any other responsibilities, tasks assigned by the direct line Manager/ Management
• Any other tasks assigned by the Management.

Comply with HSE requirements:

• Environmental Aspects & Impacts Assessment.
• OHS Hazardous & Risk Assessment.
• Follow HSE Regulations.

Requirements

• Diploma in Electrical or equivalent.
• Qualification from Technical Institute.
• 10 years of working experience.
• Knowledge of standard drafting techniques and design procedures.
• Intermediate Microsoft Office.
• Advanced AutoCAD.
• Basic AVEVA E3D & Electrical.
• Advanced Autodesk Navisworks Simulate.
• Advanced Autodesk Navisworks Freedom.
• Advanced Adobe PDF.
• Strong communication and interpersonal skills.
• Ability to work independently with minimal supervision.
• Capable of delivering tasks efficiently and meeting deadlines.
• Strong team collaboration skills.

Responsibilities:

• Lead and manage design Consultant teams to deliver high-quality design solutions on time and within budget.
• Oversee the entire design process, from concept through to detailed design and construction documentation.
• Ensure designs meet project specifications, regulatory requirements, and client expectations.
• Coordinate with multidisciplinary teams, including architects, engineers, and consultants.
• Foster a collaborative and productive team environment.
• Provide mentorship and guidance to junior designers and engineers.
• Act as the primary point of contact for clients and stakeholders on design-related matters.
• Conduct regular meetings and presentations to update clients on project progress and address any concerns.
• Ensure client requirements are accurately captured and reflected in the design.
• Implement and enforce quality control procedures to ensure the highest standards of design.
• Review and approve design documents, drawings, and specifications.
• Conduct regular design audits and peer reviews to maintain quality and consistency.
• Ensure all designs comply with relevant regulatory requirements and standards.
• Liaise with regulatory agencies to obtain necessary approvals and permits.
• Stay updated on changes in regulations and standards and ensure designs are adapted accordingly.
• Provide technical leadership and expertise in civil engineering or architecture.
• Resolve complex design challenges and technical issues.
• Stay informed about the latest industry trends, technologies, and best practices.

Requirements:

• Bachelor’s degree in Civil Engineering, Architecture, or a related field.
• Master’s degree is preferred.
• Minimum of 15 years of relevant experience in civil engineering or architecture.
• Proven experience in managing design teams on complex projects.
• Experience in the design of multi-storey bus depots or similar structures is preferred.
• Professional Engineer (PE) or Registered Architect (RA) status.
• Strong leadership and team management skills.
• Excellent communication and interpersonal skills.
• Proficiency in design software and tools (e.g., AutoCAD, Revit, BIM).
• In-depth knowledge of regulatory requirements and standards.

If you are shortlisted for the first round of screening, our Recruiter will contact you directly.

EA License No: 24C2521 | EA Reg No:21103634 (Johnny Wu)

[Job ID: 812527]

Responsibilities

Tender Management:

• Oversee the preparation of tender and contract documents, including Bills of Quantities (BQ).
• Lead and review the costing, cost planning, and estimation process for tenders.
• Manage and support multiple M&E tender projects concurrently.
• Chair pre-tender meetings and allocate duties to team members during tender preparation.

Design Oversight:

• Supervise the preparation of preliminary design drawings and design calculations.
• Ensure compliance with client requirements, industry standards, and company policies.

Cost Control and Budgeting:

• Review and approve budgets for M&E works to ensure alignment with financial objectives.
• Analyze and mitigate risks related to project cost control and budget adherence.

Team Leadership and Development:

• Mentor and develop team members, ensuring alignment with organizational goals.
• Promote a collaborative and efficient work environment.

Client and Stakeholder Coordination:

• Act as the primary point of contact between clients and internal departments.
• Address and resolve design and tender-related queries promptly and effectively.

Documentation and Compliance:

• Ensure tenders and related documents are well-prepared, compliant, and submitted on time.
• Maintain comprehensive records of all tender activities.

Ad Hoc Duties:

• Perform other responsibilities as assigned by senior management.

Requirements :

• Diploma/Degree in Mechanical/Electrical Engineering or related field
• Minimum 5 years of experience
• Familiar with tendering, project cost control in M&E works
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

-------------------------------------------------------------------------------------------------------

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

-------------------------------------------------------------------------------------------------------

EA License no.: 07C5771
EA Personnel Reg. No.: R22107257
EA Personnel Name: Li Wai Chun

Job Responsibilities:

• Provide mentorship to the Logistics Analysts in various continuous improvement, sustainability, and ad-hoc customer requested projects
• Facilitate the exchange of ideas within the team and thus enabling the extension of applicable best practices across various Operations
• Define an Operation Excellence program with measurable targets for the Logistics Analysts to work towards
• Identify global projects to set and raise the benchmark of Operational Excellence across all Operations
• Work closely with the Warehouse Management System (WMS), Commercial, Sustainability, and Innovation teams to fine-tune existing processes, generate new solutions, and introduce new technologies to existing Operations and potential clients
• Support the logistics business development team by providing relevant data and insights to existing systems and processes, at the same time aligning the goals of the Operational Excellence program to be in-sync with the business development strategy of the organization

Job Requirements:

• Degree or Masters in Logistics, Supply Chain Management, Engineering, or Business with a specialization in Operations or Supply Chain Management
• 3 to 5 years relevant working experience
• Strong in data crunching and analysis
• Proficient in LEAN, Six Sigma, or equivalent continuous improvement tools
• Proficient in Microsoft PowerPoint and Excel
• Knowledge in VBA / SQL queries / Microsoft Access / database management structure is a plus
• Comfortable presenting to and communicating with customers and all levels of the organization
• Good interpersonal skills

We invite interested and qualified candidates to submit resume for consideration. We regret that only shortlisted applicants will be contacted.

Job Description

• Prepare Soft Clay Weekly disposal forecast
• Prepare Monthly Soil disposal record
• Prepare weekend activity and duty roster update for LTA/QPS
• Prepare Manpower record
• Monthly disposal forecast update for LTA
• RC contractor daily attendance sheet and report to LTA
• Recording attendance sheets of daily coordination meetings (Daily)
• Monthly staging ground coordinating meeting
• Secant Bore Pile & King Post Inspection

Requirements:

• Candidate must possess at least a Degree in Civil/Structural /Environmental Engineering recognised by the Professional Engineer Board, Singapore
• Minimum 1 year of working experience in the construction industry. Fresh graduates are welcome to apply
• Effective communication skills, both verbal and written, with the ability to liaise confidently with clients and stakeholders.

Job Responsible

1) Design, build and maintain data pipelines and architecture in a centralized data lake environment.

2) Enhancements, new development, defect resolution and production support of Big data ETL development using AWS native services.

3) Design and optimize data models on AWS Cloud using AWS data stores such as Redshift, RDS, S3, Athena

Job requirement:

A bachelor degree in a relevant field.

Hands-on experience with data lakes, ETL processes, data modeling, and cloud databases.
• Proficiency in programming languages like Python, Pyspark, R, SQL, or VBA.
• Experience with cloud platforms (AWS CLI, SDK API , Salesforce Service Cloud).
• Experience with automation tools (UiPath, Microsoft Power Automate, PowerApps).

Good communication skills.

Job Duties :

Required to perform and support SDLC development or equivalent methodology for any IT projects assigned to them. This includes the following: -

· Requirements Gathering and Feasibility Study;

· Application Design and development;

· System Integration Testing and Users Acceptance Testing;

· Implementation and Migration;

· Post Implementation Review;

· Training;

· Technical Briefing;

· Documentation and Technical Writing;

· Testing & Quality Assurance;

· Access Control and SecurityReview;

· Code Review; and

· Load Testing.

Job Requirements:

· Analysis, design and integration

· Experience in cloud-baased applications

· Protocols and messaging applications

· Cloud-based platforms e.g AWS, Google cloud, Azure.

· Microsoft Certified Solution Developer will be good to have

· Microsoft.NET Framework ;Development Languages / Tools e.g. Microsoft Visual Studio, Sharepoint, Eclipse, Java, Perl, PHP, J2SE/J2EE Technologies (JSP, Servlet), Linux, Apache, Unix Scripting, Outlook, Qlikview,

· .Net data entity and MVC frameworks

· DBMS e.g. SQL Server, Oracle, MySQL etc.

· Database connectivity tools e.g. ODBC, JDBC etc.

· Internet Technologies e.g. Perl Scripts, DHTML/HTML/XML, Active X, ASP, SOAP, WSDL etc.

· Web services development

· Mobile Technologies (good to have)

· SharePoint Tools (good to have)

· Storyboarding and website design tools

· Application Testing tools e.g. JUnit, Nunit, JMeter and others

Interested candidates may apply to [email protected] directly with updated resume.

Role: Contract (1 year, Renewable)

Experience: 6-10 yrs

POSITION GENERAL DUTIES AND TASKS:

• Understand Continuous Integration and Continuous Delivery (CICD) concepts and principles.
• Implement a CICD Pipeline using the required DevOps tools as defined in the CICD architecture and adhering to CICD principles.
• Design and implement each of the DevOps, DevSecOps & DevTestOps tools based on best practices.
• Work with project teams to on board their project onto the DevOps pipeline.
• Implement automation of development and operations for digital projects.
• Support the DevOps pipeline and the relevant tools.
• Support and maintain the relevant tools. Example of activities includes are: product patching, issue troubleshooting, ensure service availability.

Our Requirements

• Bachelor’s degree in a relevant field. (i.e. IT, Computer Science or Software Engineering)
• At least 6-10 years of relevant experience.
• Able to design, implement, use and integrate tools such as Bitbucket, Bamboo, Nexus, Ansible etc with consideration of the security controls required to deliver the CICD Pipeline.
• Experience with DevSecOps Tools such as SonarQube, Blackduck, AquaSec, Coverity etc.
• Familiar with Linux and Windows operating systems
• Experience with monitoring and logging tools such as DynaTrace, ELK etc.
• Familiarity with Containers technologies such as Openshift, Tanzu, Docker is a plus.
• Strong understanding of best practices in using the DevOps Tools. Eg, Branching strategy, Artefact Management etc.
• Good oral and written communication skills.
• Must be proactive, resourceful and self-motivated with strong analytical skills.
• Good interpersonal, written and communication skills.

Roles & Responsibilities

Responsibilities

· Responsible for project planning and site supervision

· Coordination for civil structure, architectural, mechanical and electrical works

· Ensure site safety and prepare safe work procedure with Safety personnel

· Prepare risk analysis and method statement

· Ensure the smooth completion of the project

· Must be prepared to work on site

· Assist the Project Manager in Site Management

Requirements

· Degree in Civil Engineering Only.

· Minimum 5 years of relevant experience in the construction industry

· Able to coordinate with consultants and sub-contractors

· Only Singaporean

We are expanding! If you have the drive and capabilities to take our challenge, please apply online with full details of your experience, qualifications, current and expected salaries by clicking the Apply Now button.

SOW:

• Able to repair vehicle mechanical problems.
• Able to diagnose complicated computer fault codes on heavy vehicles.
• Able to do vehicle servicing.
• Able to communicate in English.
• Able to obey safety standards.
• Have technical writing skills.
• Ability to communicate technical knowledge in a clear and understandable manner.

Location:

• Tuas.
• 5.5 days work week.

Expectations:

• Have a degree in mechanical engineering.
• Proven working experience at least 3 years in mechanical engineering.
• Keen to learn.
• Respectful.

ENGIE Services Singapore is a leading provider of Integrated Facilities Management solutions (IFM), property management, operations and maintenance, specialised rail engineering works, sustainable solutions and FM Consultancy services.

ENGIE understands the integrated role of facility management and the value of it can be expanded beyond the traditional approach. As a total FM, specialized engineering and sustainable real estate solutions service provider, ENGIE offers a comprehensive range of technical, digital and support services customisable to best suit your unique needs.

Responsibilities

• Work closely with Facilities Manager / Senior Manager in liaising with client on all works
• To ensure the maintenance programs and rectification jobs are manage by a Team of technical officers and technicians efficiently.
• Ensure and oversee maintenance activities for ACMV systems, including chiller system, chilled water system, DX system, mechanical ventilation system, clean room system, negative and positive room system, building management system and etc.
• Creating and develop plan on installation, maintenance, and operation of ACMV systems
• Advice and lead the technical investigations for rectification works.
• Responsible for the daily AC thermal comfort are within acceptable limit as per code of practice.
• Tracking & reporting for maintenance work, follow-up on actions, and maintain maintenance checklists and schedules
• Implement efficiency improvement on the operational process, innovating and implementing systems improvement on energy conservation.
• Provide excellent service to meet client expectations.
• Providing feasible solution and coordinate with owners / users, consultants, vendors / contractors on engineering functional requirements and ensure the objectives are achieved.
• Conduct regular inspection of existing air-conditioning system to ensure that all maintenance programmes are implemented effectively in strict compliance with instructions and guidelines.
• To provide ACMV technical specifications for upgrade or renovation work when required.
• Familiar with local codes of practice, including but not limited to ASHRAE standards.
• To ensure all works carried out safely and / or in accordance with safety procedures.
• Liaise with contractors for rectification and/or ad-hoc works
• Investigate, analyse and determine root cause and report breakdowns and faults effectively
• Prepare technical reports and proposals on breakdowns

Requirements

• Degree in Mechanical Engineering or other Engineering equivalent
• Minimum 3 Years of experience in ACMV / HVAC Trade for building maintenance
• Able to guide and troubleshoot ACMV faults.
• Good communication skills and positive mindset
• Meticulous, self-motivated, self-discipline, good communication skills and well-organized; and has a good safety mindset and displays good WSH behaviour.

1. Close supervision , management and execution of construction works at site, including monitoring work progress and quality.

2. Manage,vendors,contractors and sub-con for progression of works.

3. Resposible for all the site implementation and completion towards management target.

4. Resposible for the project quality and safety plan.

5. Laise with consultant and contractor for Green Mark Certification process.

6. Ensure company ISO safety system requirements are fully implemented on project.

7. Work closely with engineering team on any technical issues arising from site and lead the supervision and resolution of work on site.

8. Ensure proper documentation and record of site are carried out.

ENGIE Services Singapore is a leading provider of Integrated Facilities Management solutions (IFM), property management, operations and maintenance, specialised rail engineering works, sustainable solutions and FM Consultancy services.

ENGIE understands the integrated role of facility management and the value of it can be expanded beyond the traditional approach. As a total FM, specialized engineering and sustainable real estate solutions service provider, ENGIE offers a comprehensive range of technical, digital and support services customisable to best suit your unique needs.

• Work closely with Technician & TO
• In Charge of Building Services, System Operation and maintenance on-site
• Responsible for the planning and execution of corrective/preventive maintenance program
• Liaising with OEM / system contractor for all Building Services / Civil works.
• Improving the efficiency on the operational processes, innovating and implementing systems improvement on energy conservation.
• To provide excellent service to client expectations.
• To achieve effective, economic and safe operations of all Building Services' equipment and system by the team of technical officers and technicians
• Providing feasible solutions and coordinate with owners/users, consultants, vendors/contractors on engineering functional requirements and ensure the objectives are achieved.
• Conduct regular inspection of existing building and its services to ensure that all maintenance programmes are implemented effectively in strict compliance with instructions and guidelines.
• To ensure all works carried out safely and / or in accordance with safety procedures.
• Provide training and guidance to team of Technical Officers and/or Technicians
• Any other tasks, when required by Facilities Manager.

Requirement:

• Bachelor's Degree in Civil Engineering, Mechanical Engineering, Building Technology, Property Management, Facilities management or Building related disciplines.
• Experience in building finishing works.
• Familiar with procedures for statutory submissions such as FSSD, M&E RI, Architectural RI, 5 Yearly Structural Inspections.
• Experience in supervision and project management of A&A works.
• General knowledge of M&E building services.
• Able to guide and troubleshoot Building Services / Civil faults.
• Minimum 3 years of hands-on experience in Building Trade.
• Experience in Plumbing and Sanitary preferred.
• Able to communicate & write in English
• A good team leader.
• Has a good safety mindset and displays good WSH behaviour

Good programming skills in Python

Must possess experience or interest in training and deploying machine learning models end to end.

Good understanding of basic statistics and deep learning techniques

Prior experience in data integration, profiling, validation and cleansing

Proficiency with SQL

Software delivery

Strong understanding of agile methodologies

Strong understanding of CI/CD

Strong understanding of test-driven development

Comfortable using version control and enterprise task management tools.

Data Engineering

Experience in deploying TensorFlow and PyTorch into production

Building data pipelines and architecture

Should have extensive experience with relational and NO-SQL databases

Should have proficiency in handling both structured and unstructured data sources

Strong experience deploying applications to cloud platforms like Azure, AWS

Interest in building efficient batch and streaming data engineering pipelines

Exposure to distributed data processing platforms like Spark

Your responsibilities include technical administration, maintenance and troubleshooting.

Monitor condition of server, apps and security measures

Identify, log and resolve technical problems of the scope (Incident Management)

Ensure that work is carried out within agreed service levels (Service Request / Incident / Change / Patch Management)

Respond to site to troubleshoot, diagnose and rectify faults

Liaise and coordinate the recovery of systems

Identify potential changes and system improvements for consideration and implementation (continuous improvements)

Create, maintain and distribute reports of progress to service delivery manager.

Any other ad-hoc tasks assigned

Good knowledge of Vmware and Nutanix

Good knowledge of windows operating systems, Clusters, NLB, or Unix

Good knowledge of Solarwinds, Qradar

At least 3 years of relevant working experience in infrastructure support is required for this position

Job Description:

• Manage and maintain security protocols, IT systems, networking infrastructures and database systems.
• Troubleshoot technology issues.
• Manage multiple projects simultaneously.
• Work with inter-disciplinary teams to craft IT solutions.
• Communicate complex information to a non-technological audience.
• Assist in researching, designing and implementing new programs.
• Identify and solve problems in existing hardware and software solutions.
• Develop, modify and maintain database.

Job Requirements:

• Diploma or Bachelor's degree in computer science or related field.
• Minimum 4 years of relevant working experience in the technology space.
• Knowledge on relevant IT standards and practices.
• Knowledge of Information Technology strategy development, including network.
• Experience in SAP software and implementation will be an added advantage.

We regret that only shortlisted candidates will be notified.

Interested applicants kindly click on “apply now” or send your updated resume to [email protected]

Jayden Kua Jing Yu
Registration Number: R24124814
EA License Number: 02C4944
People Profilers Pte Ltd, 20 Cecil St, #08-09, PLUS Building, Singapore 049705
http://www.peopleprofilers.com

• Candidate must possess at least Bachelor's Degree in Engineering (Civil & Structural) from local or recognized foreign universities subject to Client's approval
• 3 years & above working experience in the related field is required for this position
• Perform Engineering Design and drawings
• Project coordination and documentation
• Perform building/site inspections.
• Attend progress meetings.
• Work related travel and meetings
• Any other duties as assigned

Job Requirement

• Keen to learn and work independently with minimum guidance.
• Able to work under pressure, dynamic, creative and results oriented.
• Conversant in regulatory requirements and building codes.
• Good knowledge of AutoCad and Revit.
• Possess Class 3/3A driving license preferred.

Job Responsibilities:

1. Responsible for the electrical design of the company's equipment, including electrical diagram drafting, selection of electrical components, and electrical control system programming.
2. Participate in the installation, debugging, and maintenance of electrical equipment to ensure stable system operation.
3. Develop optimization plans for electrical systems to improve equipment operating efficiency and safety.
4. Analyze and resolve electrical faults during equipment operation and provide technical support.
5. Prepare electrical technical documentation according to project requirements, including electrical schematics, wiring diagrams, and operation manuals.
6. Keep up with the latest industry technologies and suggest improvements for electrical systems.
7. Collaborate with related departments such as mechanical and process engineering to ensure smooth project implementation.

Job Requirements:

1. Bachelor's degree or above in Electrical Engineering, Automation, or related fields.
2. Familiar with mainstream PLC programming and applications (such as Siemens, Mitsubishi, Omron, etc.), with experience in touchscreen and human-machine interface development.
3. Proficient in electrical schematic drawing software (such as CAD, electrical drafting tools).
4. Familiar with national standards and industry regulations related to electrical systems.
5. Experience in the design and maintenance of low and high-voltage distribution systems is preferred.
6. Strong problem analysis and solving skills, with a good sense of teamwork.
7. Electrical qualification or related certification is a plus.
8. 1-3 years of relevant work experience (exceptional recent graduates will also be considered).

Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

• Monitor and review master construction program and preparation of catch-up program, if applicable.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Preparation of detailed method statements and work instructions for construction.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.

Requirements:

• Degree in Civil Engineering or its equivalent
• Minimum 3 years of working experiences in construction industry.

About the Role:

We are seeking a Resident Engineer (Civil) to join our team working on various construction projects. The role involves assisting the QPS in daily supervision and coordination duties, including working on rotation shifts, which may include night shifts and public holidays. Your role as the Resident Engineer will be pivotal in ensuring the successful execution of construction projects, adherence to regulations, and maintaining high-quality standards throughout the project lifecycle.

Responsibilities:

- Provide site supervision for Civil, Structural, and miscellaneous works for infrastructure projects.

- Oversee Resident Technical Officers (RTOs) in their daily duties.

- Coordinate with contractors on work schedules, progress, work quality, site safety, and quality control.

- Liaise and coordinate with relevant authorities and local communities for on-site works.

- Administer contracts, including assessing progress payment claims, variations, extension of time, etc.

- Monitor that the Contractor's work aligns with drawings, specifications, approved methods, and schedules.

- Review Contractor submissions such as materials, suppliers, construction methodology, etc.

- Coordinate with other contractors working on-site.

- Provide regular feedback and reports to the Consultant on work progress and suggest improvements related to safety, supervision, security, construction, and maintenance.

Job Requirements:

- Minimum Degree in Civil or Structural Engineering, or equivalent accreditation recognized by the Professional Engineers Board (PEB) Singapore.

- Registered as a Resident Engineer accredited by the Institution of Engineers Singapore (IES) or the Association of Consulting Engineers Singapore (ACES).

- Possess 3-5 years of site supervision experience as a resident engineer, preferably with HDB/LTA project experience.

- Thorough understanding of Building and Construction Authority (BCA) Regulations, systematic site record maintenance, government contract documents, and compliance with BCA reporting requirements.

- Proficiency in MS Word, Excel, and Project for project updates and reports.

- Familiarity with local codes and regulations.

- Ability to fulfil duties as the Qualified Person (QP) representative as per BCA regulations, reporting to the project QP and Engineers.

- Effective communication and interpersonal skills.

- Experience in supervising major earthworks, roads, drainage works, PUB pipeline works, and associated projects is advantageous.

- Willingness to travel and work at multiple sites.

Job Descriptions:

• Position : HVAC Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $6,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Engaged in all mechanical engineering designs, calculations, preparing bill of materials, and liaise with customer and suppliers for any engineering query.
• Participated in design and construction document preparation and submissions.
• Conducted technical review and clarifications with customer and suppliers.
• Coordinated design efforts with other engineering disciplines.
• Participated in construction, installation, testing and commission activities.
• Involve in identifying the Company scope of work in the project.
• Involve in solving technical issues that arise in the project.
• Monitor the progress of the document submission.
• Performed some drafting scope and also guide drafters for drafting.

Requirements:

• Minimum Diploma/Degree in Engineering or related field.
• Relevant job experience in oil and gas/process/marine industry preferred.
• Must have basic mechanical design knowledge.
• Proficient in performing HVAC cooling capacity calculations, pressure drop calculations, and duct sizing.
• Experienced in duct installation and HVAC system installation.
• Skilled in creating piping and instrumentation diagrams (PID), Airflow diagrams, and ducting and instrumentation diagrams (DID).
• Knowledgeable in basic pipe sizing, selection, and pipe installation.
• Familiar with basic fire suppression systems.
• Proficient in using AutoCAD for drawing and design.
• Proficient in MS Office applications.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257