Main contractor for LTA project seeking for the above position:-

Alternate Saturday

Roles & Responsibilities:-

· Planning the detail construction methods, sequences, and procedures, and in liaison with the subcontractors under the direction and instruction of the Construction Manager.

· Directing the field construction works with strict control, especially on works activities that been identified to be hazardous and of high risky and ensuring their compliances of safe work practice.

· Ensuring all the works to conform to the Specifications, Works sequence and methods of construction.

· Identifying nonconformities and reporting them to the Construction Manager and Quality Management Representative.

· Supervising the field construction works including safety arrangements.

· Coordinate with Site Engineers of the subcontractors’ works.

· Carrying out or attending inspections and monitoring the progress of the works.

· Handling Engineering matters including work procedures and shop drawings.

· Managing the subcontractors and workers.

· Implementing the Quality System in the field construction works.

· Produce working schedules of short terms and keep records of the works.

· Ensuring that work schedules are followed and achieve milestones dates.

· Reporting to the Construction Manager if any changes and conflicts are ordered or found in the construction.

Qualifications and Education Requirements:-

· Minimum 10 years of relevant experience after obtaining a Degree in Civil Engineering recognised by the PE board, or other qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer or Degree in the relevant field subject to the acceptance by the Engineer and minimum 5 years of experience in the construction supervision of major underground structures of a similar nature.

Job Description:

• Responsible for the supervision of Electrical Equipment testing and commissioning at site, review and submission of site acceptance test reports.
• Review Single Line Diagrams and Electrical Schematic Drawings.
• Assist in Electrical Equipment Installation Inspections.
• Attend to Site Activities and Meetings involving clients and contractors.
• To undertake tasks / assignments as and when directed by the Commissioning Lead.

Requirements:

• At least 2 Years of local working experience in the related field is required for this position.
• Possess initiative and capable of multi-tasking in a fast paced environment.
• Experience in MV / LV Electrical Equipment (Site Installation, Testing and Commissioning, Maintenance Testing) will be an added advantage

To apply online please use the apply function:

(EA:17C8643 / R1766238 )

Roles & Responsibilities

We are looking for a Cloud Engineer to help with the acceleration of cloud adoption. The applicant will have a strong background in IT Infrastructure with a strong understanding and at least 8 years’ experience with Public, Private and hybrid cloud.

Job Responsibilities

• Design, deploy, and maintain cloud-based infrastructure using AWS or Google Cloud.
• Ensure compliance with asset management regulations in relevant countries.
• Monitor and optimize cloud resources for performance, cost, and security.
• Collaborate with cross-functional teams to develop and implement cloud solutions.
• Troubleshoot and resolve cloud-related issues promptly.
• Develop and maintain documentation for cloud infrastructure and processes.
• Stay updated with the latest cloud technologies and best practices.
• Managing cloud environments in accordance with company policies and security guidelines.
• Developing, deploying and debugging IaC code (Cloud formation and Terraform).
• Interacting with users, providing cloud support, and making recommendations based on user needs.
• Employing exceptional problem-solving skills, with the ability to see and solve issues before they snowball into problems.
• Educating teams on the implementation of new cloud technologies and initiatives.
• Regularly reviewing existing systems and making recommendations for improvements.

Job Requirements

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• 8+ years of experience.
• Experience in cloud engineering, with a focus on AWS or Google Cloud.
• Experience in the financial services industry.
• Strong understanding of cloud security, networking, and cost management.
• Knowledge of DevOps practices and tools.
• Familiarity with asset management regulations in countries where UOB Asset Management operates.
• Experience with infrastructure as code (IaC) tools such as Terraform or CloudFormation.
• Proficiency in scripting languages like Python, Bash, or PowerShell.
• Excellent problem-solving skills and attention to detail.
• Strong communication and collaboration skills.
• Relevant cloud certifications (e.g., AWS Certified Solutions Architect, Google Cloud Professional Cloud Architect).

Maintain the existing PLC and SCADA system, and build the new system, and trouble shooting for the control system and control panel, and prepare the electrical single line drawing using AutoCAD, and coordinate with customer to understand customer's requirement. We will provide on site training, and hope the candidate willing to learn.

Assistant Project Engineer/Project Engineer (M&E)

Visit https://ourengineers.com to apply or submit your CV for more job opportunities.

Responsibilities:

· Maintains project team accomplishments by communicating essential information; coordinating actions; obtaining expert input; reviewing open issues and action items; contributing information to team meetings and reports; escalating project completion impediments.

· Day-to-day management on site, including supervising and monitoring the site and co-ordinate sub-contract works.

· Liaise with clients and consultants on project.

· Produce proper reports and documentation before and after project completion.

· Complies with codes and regulations by complying with requirements; preparing permit applications, plans, and compliance reports.

· Assist to update of As-Built drawing on site.

· And all other General Administration works as instructed.

Requirements:

· Minimum Diploma or equivalent.

· Min 2 years working experience in M&E at Interior Design Fit up(Electrical / ACMV / Plumbing / Fire Protection)

· Able to work independently and possess good interpersonal skills.

· Able to start work immediately or within short notice

Visit https://ourengineers.com to apply or submit your CV for more job opportunities.

We are looking for a service engineer to support the preventive Maintenance on the Army Comms Equipment & Accessories. Must be able to perform Battery replacement, functional test and Air Leak test.

Responsibilities:

• To support the Preventive Maintenance on the Army Comms Equipment & Accessories.
• Must be able to perform battery replacement, Air leak Test and Functional Test and checking on Comms Accessories.

Requirements

• Diploma / ITC / NTC-2 in Electronics and Communications Engineering or equivalent
• At least 1-2 years of related working experience in Electronics and Communications Equipment
• Team player and able to work independently.

Other Information

• Good soldering skill will add an advantage

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as an:

Application Engineer

Job description

· Handling various projects under the Service Division and technical support for projects under maintenance.

· Design Building Management System based on Technical Specifications

· Program equipment (ACMV, Electrical, Plumbing, etc.) under BMS based on the sequence of operation.

· Design and implement the graphical user interface, reports, and dashboards based on project requirements.

· Support Testing and commissioning of BMS projects

· Provide Root cause analysis for system faults/issues.

Key Requirements

• Engineering graduate, with knowledge is MS Office.
• Knowledge in MS SQL, VBA, online collaboration platforms and other programming languages is a plus.

Remuneration:

• $2,500.00 - $4,000.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to: [email protected] for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,500.00 - $4,000.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

Job Description

We are looking for a motivated System Engineer to join our team! As a System Engineer, you will be responsible for supporting our System team in all aspects of the development, testing and implementation of our in-house integrated solutions. Project phases involved include design reviews, lab setup, Factory Acceptance Test, installation, checkout, integration and on-site acceptance test, training and documentation.

Responsibilities

• Support System Lead in System design, development and project delivery
• Responsible for System documentation
• Formulate / revise specifications for purchase of IT equipment (e.g. servers, switches) and software, ensure successful and timely delivery by contractor
• Plan, manage and perform system equipment installation
• Perform system OS and software installation, configuration
• Perform OS hardening according to security guidelines
• Plan and conduct system acceptance tests with customer, prepare acceptance test reports
• Support integration testing
• Provide support during project phase and system warranty period
• Prepare operator manuals and assist in conduct of user training

Requirements

• Degree in Computer Engineering / Electrical Engineering / IT
• Microsoft Certified Engineer (MCSE) and/or VMware certification is an added advantaged
• Knowledge and experience for Windows OS configuration and hardening, software installation and virtualised environment setup
• Knowledge of Red Hat Enterprise Linux will be an added advantage
• Good understanding of computer networking
• Experience in configuration of network switches, routers and firewalls will be an added advantage
• Strong interest in learning technologies and products
• Good interpersonal communication skills
• Good technical writing and presentation skills
• Good analytical and problem-solving skills

Our Client:

• Engineering Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Design and build data pipelines infrastructure to collect, process and store data from various sources.
• Develop data assets platform to provide a centralized repository for managing and accessing data assets.
• Implement automated SQL queries based on user-defined criteria or business requirements.
• Use techniques like query templates, metadata-driven generation, or machine learning algorithms to generate SQL queries.
• Create new IPs in Singapore in area of expertise.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new technology development.

Requirements:

• Degree / Masters / PhD in Computer Science, Data Science, Statistics Applied Sciences or related field.
• Proficiency in Python, SQL, Java or Scala programming languages.
• Understand data warehousing concepts, ETL (Extract, Transform, Load) processes and tools like Informatica, Talend, or Airflow.
• Knowledge of relational databases (MySQL, PostgreSQL, Oracle) and NoSQL databases (MongoDB, Cassandra).
• Familiar with Apache Airflow, Kubernetes or Ansible for automating data pipelines and infrastructure.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Resident Engineer

Available job sites at various locations:

- Ang Mo Kio

- Jurong West

- Bugis

- Hougang

-West Coast

Description:

-To assist Qualified Person (Supervision) in ensuring the works is carried out in accordance to approved drawings

- Manage a team of Resident Technical Officer(s) in performing their duties on site supervision

- Liase and conduct inspection with Contractor and Consultant

- Oversee all aspects of the project and keep record of works, materials, attend meetings, keeping minutes of meetings and discussions etc.

Requirements:

- Accredited as a Resident Engineer with IES/ACES

-Degree in civil and structural engineering from a University accredited by the Professional Engineers Board, Singapore

-Literate in English and have a good knowledge to use computer softwares. E.g. Microsoft office

-Experience in LTA project sites would be a plus

Job Description & Requirements

UTILITY ENGINEER (LTA Tunnelling Construction)

- Report to Site Mgr/Construction Mgr/Coordination Mgr/PM/PD

- Provides coordination of construction of the project t pertaining to the utilities.

- Ensure the project needs are met without compromising the reliability of the utility system

- Ensure all utility documents are properly submitted and filed

- Conduct routine site inspections to ensure adherence to relocation plan

- Review project documentation from consultant for compliance with all relevant regulations, codes, guidelines and policies

- Schedules and attends all necessary and related pre-construction conferences for utility relocations

- Reviews utility relocation plans as compared to project construction plans to identify and correct potential utility conflicts prior to construction

- Coordinate with engineering and design consultants in order to find the best solution cost-frame time

- Liaise with construction manager to ensure that the utility work supports construction sequencing and respective deadlines are met and on schedule

- Resolve site inquiries, attending site meetings and performing site inspections during construction

EDUCATIONAL QUALIFICATION:

- Minimum Diploma/ Degree in Engineering technology

EXPERIENCE / SKILL REQUIRED

- Must have at least 5 years of engineering working experience in the relevant field (ideally with LTA projects)

- With 2 years experience in the Coordination with utility agencies for similar projects

- Good interpersonal and communication skills and able to interact with people of all levels

- Experience with utility design or utility construction activities (gas, water, sewer, telecom)

- Experience in coordinating and scheduling installation of utilities

Conduct primary technical reviews of the contractors work and ensure approvals are obtained where relevant

Evaluate and advise on electrical related design changes and non-conformances to ensure fulfilment of the requirements

Identify new business opportunities and have involvement in bids/tenders etc

Provides guidance and direction on department design guides, standards, systems, applicable engineering codes and policies

Independently applies knowledge and complies with quality program relative to assigned tasks

Oversees collection, assimilation, and management of data for engineering work

May offer other services to the clients

Provide electrical engineering and technical expertise to ensure the safe and reliable operation of electric power systems in processing facilities worldwide

Originate plans and develop strategies for power systems worldwide to ensure electrical reliability and safety in the most cost effective manner

Participate in engineering design through all phases of the process

Preparation or supervision of drawings for plant general arrangements, power single line diagrams, cable block diagrams, instrumentation loop diagrams, P&IDs, control system architecture drawings, and cable, instrument and I/O schedules at detailed design level.

Some electrical design will also be required for integration and system development of electro-mechanical systems

Assist in design and documentation of vehicle electrical architecture

Develop Project Timelines in support of Program milestones

Development and Release of Engineering Component and Assembly Drawings

Resolve Test Issues and Document Through the use of the PDCA Process

Test and certification report generation

Provides electrical engineering and project management expertise in support of projects, to ensure stated quality, operational, safety, schedule and budget objectives are met

Provide training to electricians on safety

Ensure complete and current electrical prints for all machines

Maintain documentation for all electrical components used

Organize documentation and electrical prints

Design Circuit Card Assemblies (CCA) using Altium Designer for Schematic, and layout

A working knowledge of cost estimating, code review, field investigation, report and memo writing and other similar electrical engineering related tasks

Power distribution, essential power systems including generators and UPS, Substations, transformers, metering, primary and secondary switchgear, motor control and motor control centers Life Safety including Fire Alarm system design

Prepare reports, proposals, and tender/bid submissions, budgets, project plans and other supporting documentation as required

Develop standards related to our electrical engineering practice, ensuring best practices for project delivery, and when applicable sustainable building constructions

Lighting, Lighting Control systems.

Manage internal and external stakeholders - Support and run the commercial and contractual side of projects

Evaluates and test components

Ensures design, fabrication, maintenance and repair methods/processes are developed executed in a manner, which supports all quality standards

Develops, designs low voltage (600V) and medium voltage (15kV) and high voltage (115kV) electrical distribution systems for building, industrial and utility facilities

Performs electrical system design for switchgear, switchboards, motor control centers, variable frequency drives, generators, transformers, distribution panels and various raceway systems

Designs underground medium voltage distribution systems and sizes electrical low voltage (600V) and medium voltage (15kV) and high voltage (115kV) equipment

Serves as the Engineer of Record for drawings, specifications and reports prepared under their direction

Performs field investigations, field inspections and witnesses start-up/acceptance testing activities

Works effectively in a collaborative environment with Architects, Mechanical Engineers, Civil Engineers and Structural Engineers on large multi-discipline projects

Coordinates with Mechanical, Fire, Architecture, Structural and Civil disciplines for comprehensive building design or modification.

Provide instruction on electrical drawing and using AutoCAD electrical

Work with PCB Fabrications houses to develop the stack-ups, dieletric materials, routing guidelines, and any Design For Manufacturing (DFM) suggestions

Write AFCEs

Determine project specifications

Compare equipment and select manufacturer

Work with on-shift maintenance personnel to find and fix problems on down equipment

Engineer solution to fix root cause and prevent recurring failures

Create and conduct training, if required, to prevent future downtime

Design equipment upgrades to optimize machine performance

Estimate total project costs and estimate project payback

Responsible for designing, testing, supporting, and troubleshooting components of low-voltage and medium-voltage electrical systems operating up to several megawatts

Develop system-level and/or physics-based models of components and devices in support of new technology development, project engineering, and test & evaluation

Develop and/or improve the test methods and procedures

Write test procedures and technical papers

Responsible for the design, analysis, and testing of advanced power electronic systems for both military and commercial applications

Will lead and direct small technical teams (engineers, designers and technicians) in solving complex problems

Responsible for writing requirements, specifications, and design reports

Act as an expert and advisor in power electronics engineering and electrical engineering area

Advises and directs the activities of assigned programs and/or projects to achieve technical objectives

Responsible for digital and analog design with power electronics emphasis and must be able to do system level design and analysis

Requirement:

Degree in Electrical and Electronics Engineering.

Knowledge of international codes & standards IEC, ANSI / IEEE

Significant experience in the power generation industry strongly desired

Prepare Electrical Engineering deliverables such as calculations, equipment specifications, datasheet

Working knowledge of “AutoCAD” or equivalent CAD system, MS Project, and MS Office

Track record of launching high volume electronics products, especially low power platforms

Knowledge of the PCB design process and tools experience with Cadence or Altium products

Proficiency with EE lab instruments and their use in verification and troubleshooting

Experience with ODM, JDM, or CM models of product development

Self-starter and creative problem-solver

1. Involve in Programming, Scheduling, and Progress tracking of projects·

2. Co-ordinate with Site Supervisor and Sub-contractors on progress matters and prepare monthly and weekly reports·

3. To develop, monitor, and review equipment and manpower deployment plans for project sites·

4. To perform monthly/weekly/daily project progress reporting activities·

5. To monitor the progress of projects and Update the management for any schedule variances·

6. Act as a point of contact and communicate project status to all participants·

7. Any other ad-hoc assignment being assigned from Superior·

8. Knowledge of Plumbing/Sanitary Works an added advantage.

Job Description:

· Assist in the execution of projects assigned.

· Proficient in the understanding of MEP/ construction drawings.

· Supervising/ monitoring of sub-contractors work and ensuring safety practices are followed.

· Discuss with PM/HOD for site problems and technical difficulties.

· Liaise with affiliated parties for smooth execution of work on site.

· Material tracking to ensure sufficient materials are readily available for installation.

· To carry out inspections of incoming materials and equipment deployed to work site.

· Conduct quality checks of sub-contractor/ vendor works daily.

· Handle site inspection with client/main contractors representatives and updates site installation progress.

· To update drafter on site changes and as-built drawings.

· Arrange and obtain for permit to work before execution of site.

· To ensure all project documentation are properly kept and filed.

· Attend daily toolbox and WSH meeting.

· Carried out assignments as detailed by PM/ HOD.

Job Requirements:

· Preferably NITEC/ Diploma in Electrical Engineering.

· Minimum of 2 years of experience in similar capacity under building/ construction/ engineering industry.

· Electrical background preferred.

· Candidate with BCSS is a plus.

a) Works at the construction site for civil engineering works

b) Identify , liase and to disolve the techinical /construction issues with the project owner /consulatnts, various supplier or sub contractor

c) Preparation of the shop drawings , method statement , SOP of the works

d) To assist for the planing , supervising , monitoring and controlling daily works acvitites /tasks and to improve the works progess

e) To prepare the neccessary reports or related presentation

f) To propose any alternative effective and efficient construction methods or ideas for speed, quality and safe works

g) To ensure construction works are done accordingly and comply to all authorities requirements or standard

h) Ability minimun to master / operating the cad version drawings

i) Able to work indepentantly with great initiative and motivation

Our client, a leading company in Singapore, is expanding. They value self-development, career progress and most importantly a healthy working culture. Join them in this exciting journey as a:

Service Engineer

Job description

1. Perform the maintenance service in a proper and correct manner as stated on the checklist

2. Attend emergency breakdown service as instructed by the team leader

3. Carry out testing & commissioning for A&A work and run the small size of project

4. Provide technical support to the Application Team

5. Co-ordinate with the Project and Application departments and provide necessary support when required by the Team Leader

6. Support the systems testing related activities with the Project and Application Teams

7. Liaise with sub-contractor to perform site survey for A&A work and to provide detailed information on equipment quantity and method for the installation to the relevant parties for preparation of quotation

8. Deliver good standard of workmanship and ensure accurate quantity and quality of the equipment to be installed at site

9. Conduct in-house training when is required

10. Perform standby duty and other ad hoc duties as assigned

Key Requirements

• Diploma/ Degree in Mechanical/Electrical/Electronic Engineering
• 2 years’ experience in security systems
• Strong knowledge in network and security systems, able to troubleshoot and rectify the network and systems related issues.

Remuneration:

• $2,500.00 - $3,600.00 per month

Work Arrangements:

• Work Location: In person

Please submit your updated and comprehensive CV to: [email protected] for a P&C discussion. Your CV should be updated and in MS WORD FORMAT ONLY (NOT PDF) with full career details, stating current or last drawn salary with full breakdown such as base, incentives, AWS, etc. and expected salary, contact details, educational qualifications, working experiences, reasons for leaving each past employment(s) and availability date.

For quicker processing, please indicate the position applied for on the subject header. We regret to inform that only shortlisted candidates will be notified. However, if you are not selected, we will explore other positions for you, in the near future. All applications will be treated with the strictest confidence.

What our client offers

Our client offers an attractive remuneration package, a fast-paced and exciting working environment and provides challenging opportunities for career advancement. They care about their employees. They are not just an employer. They are a Team. They do not just offer you a job, they offer you a career. By joining their team, you will find a strong purpose and deep meaning in everything you do. You will have the chance to make a real difference for customers, working alongside a passionate team of like-minded colleagues, while building your knowledge/skills and developing your career in a fun, dynamic and fast-growing organization.

Our client advocates fair employment practices, recruits talents based on merit and fit with their corporate values and complies with the Tripartite Guidelines on Fair Employment Practices (TGFEP), including the prevailing guidelines on recruitment. They are committed to achieving diversity and creating an inclusive working environment. They welcome all applications irrespective of social and cultural background, race, gender, age, religious belief or nationality.

Personal Data Protection Statement for Job Applicants

Please be informed that the personal data you provided by way of your job application to Grace HR Solutions will be collected, used and disclosed by or on behalf of Grace HR Solutions to determine or investigate your suitability, eligibility or qualifications for employment with Grace HR Solutions and/or its clients and manage your application for employment with Grace HR Solutions and/or its clients including identifying you as potential candidate for future suitable positions and/or notifying you of any such positions, either existing or in the future.

Thank You!

ANDY LUCAS | CEI No: R24123824 |

Grace HR Solutions | EA Licence No: 22C1305 |

UEN: 53456396A

Company Overview

Grace HR Solutions is a boutique professional recruitment consultancy involved in the recruitment of permanent, contract, and temporary positions. We are fully committed to achieving excellence in every assignment through leveraging our vast candidate pool, industry connections, and strategic insights. As the total recruitment and staffing solutions partner, our goal is to provide our Clients the best staffing solutions through an integrated database network supported by localized content and services. We strive to be efficient and effective in matching the right candidate to the right job. Reach out to us to discover even more about how we can help you with all your staffing needs or your own career

Job Type: Full-time

Pay: $2,500.00 - $3,600.00 per month

Schedule:

• Monday to Friday

Location:

• Singapore (Preferred)

Work Location: In person

Job Description:

• Manage the project site by overseeing the day-to-day running of all matters related to the construction of the project as designated by the Project Manager.
• Plan, implement and monitor the work schedules according to the master and detailed work programmes.
• Assist in the planning and sequencing of the construction operations according to the Project Quality Plan.
• Liaise with client's representatives on site and with all subcontractors.
• Conduct inspections and checks on work performed by all subcontractors.
• Assist in the evaluation and resolution of any discrepancies and problems arising during construction and which has an effect on quality of the works.
• Ensure that updated drawings including shop drawings are used by for all construction.
• Co-ordinate the handing over of completed works to the client and completion of the necessary rectification works.
• Prepare project-related reports as required by the Project Manager or Construction Manager.

Job Requirement:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.
• PE Board Recognised Degree
• At least 5 Year(s) of working experience in the related field is required for this position.

Job Highlights:

• Working with world's leading company in SMT / PCB / semiconductor industries.
• Attractive salary package: AWS, variable bonuses, comprehensive medical coverage.
• Career growth opportunities with trainings provided.

About the Company:
Our client is a global technology company and a market leader that develops and provides leading-edge solutions in surface mount technology, equipment and materials for the semiconductor assembly and packaging industries.

Role Overview:
Join our client's dynamic team as a Software Engineer or Senior Software Engineer, where you will develop and manage cutting-edge solutions for SPI, factory line systems, and associated modules. The role demands technical expertise, creativity, and a strong focus on quality to deliver scalable and maintainable software solutions. Senior candidates will additionally lead complex design tasks, mentor junior engineers, and drive innovation in a competitive landscape.

Key Responsibilities:

• Design, develop, and maintain software solutions for SPI and factory line systems, focusing on quality and scalability.
• Provide effective solutions for production units and address customer requirements with a balance between functionality and time-to-market.
• Solve complex engineering problems using innovative approaches and technical analysis.
• Conduct technical reviews and provide evidence of appropriate solutions to customers.
• Stay updated on industry trends through continual professional development.
• Guide junior team members (for Senior roles) and support their growth.
• Perform any additional ad-hoc duties as assigned.

Requirements:

• Bachelor/Master Degree in Engineering or a related discipline.
• A minimum of 3–5 years of relevant working experience, depending on the role.
• Strong experience in software design, analysis, and validation of engineering requirements.
• Proficient in C++, UML, and the appropriate usage of design patterns.
• Familiarity with Source Control Systems, Visual Studio, and Software Development Lifecycle.
• Knowledge and experience in hardware systems, real-time control systems, Unit Testing, Dependency Injection, and WPF are advantageous.
• Demonstrated ability to balance functional design with time-to-market considerations while maintaining scalability and maintainability.
• Senior candidates should have experience mentoring junior engineers and leading complex software design tasks.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027

(2 years contract renewable)

• 5 days, 8.30am- 5.50pm
• Location: East, and client's site whenever required

1. Associate System Engineer

• Salary: S$ 2,800 ~ 3,000 + allowance

2. System Engineer

• S$ 3,500 + Allowance

Job scope:

• To provide support on maintenance project.
• Handle system administration, network support, implementation, troubleshooting in Windows / Linux / Unix.
• Hands on experience in managing LAN / WAN / Routers / Switches / DNS / VPN and Firewall is preferred.

Requirements:

• At least a Diploma in Engineering (Electrical/Electronic), Computer Science/Information Technology or equivalent.
• Must have at least 1-2 years of Server experience
• Able to work on scheduled standby on rotating weeks

Apply now for Interview arrangement

Daniel Wong | Senior Consultant | Reg No: R2095781

The Supreme HR Advisory Pte Ltd | EA No: 14C7279

• Excellent communication skills

• Interpersonal skills, active listening

• 1 year previous Service desk or equivalent experience

• Attend to Phone, Email and any other online queries where applicable

• Excellent organisational skills

• Managing incidents including business expectations and communication

• Strong knowledge of Microsoft based operating systems, MS Outlook and MS Office

• ITIL Knowledge will be a plus

• Comply to process and procedures

• Administrative tasks

Must have Talent / Skills

• Minimum a diploma in Information Technology or equivalent

• Minimum 1 year of relevant working and technical IT experience

• Pleasant disposition and good social etiquette with good spoken and written English

• Good telephony and problem solving / troubleshooting skills

• Good customer service attitude

• Process Driven

• Able to liaise with Customer for daily operations

Responsibilities:-

• Assist Project Manager in all on-site technical/ engineering matters and authority submissions.
• Responsible for designing and detailing of Civil and Structural Engineering works to ensuring that the Structure sections of the works are constructed in accordance with the contract requirements
• Responsible for timely submission of reports and completion of projects for tender/submission with target dates
• Planning of micro scheduling with other trades/disciplines against Master program
• To update structural/architectural/M&E progress with scheduling tools.
• Manage projects to meet the time, cost and quality objectives
• Liaise with consultants, contractors and authorities from inception to completion of projects
• Supervise the structural works of sub-contractors and work closely with site operations staff to meet the project schedule.
• Coordinate and monitor work progress at site including periodical site
• Responsible for all inspection activities and attending meetings during course of construction of projects being carried out
• Monitor site safety and liaise with the Safety Engineer

Requirements:

• Degree in Civil or Structural Engineering recognized by PE Board/ BCA
• 4-5 years HDB experience in Building Engineering main-con companies
• Experience with Precast/PPVC/MET projects will be a plus
• Proficient in MS Office, AutoCAD, and BIM
• Able to work independently and a team player
• Good analytical, supervision, and communication skills

Key Responsibilities:

• Oversee and manage the day-to-day operations of low-voltage (LV) electrical installation projects, coordinating with contractors, suppliers, and on-site teams to ensure smooth execution of work.
• Conduct regular site inspections to monitor progress and ensure compliance with project plans, safety regulations, and quality standards.
• Review and interpret electrical schematics, layout drawings, and technical documents, while using AutoCAD software to create, update, and revise electrical drawings as required. Provide technical guidance and troubleshooting support for on-site electrical installations.
• Prepare work schedules, allocate resources to meet project timelines, and maintain accurate records of site activities, materials usage, and project milestones.
• Report progress and address any issues to project managers and stakeholders promptly.
• Ensure that all electrical installations meet regulatory and safety standards.
• Conduct regular safety briefings and enforce adherence to safety protocols on-site.
• Act as a point of contact between the project team and site personnel, effectively communicating with clients, consultants, and stakeholders to ensure mutual understanding and alignment on project goals.

Requirements:

• Diploma/Degree in Electrical Engineering or a related field.
• At least 2-3 years local LV (low voltage) electrical installation projects background.
• Proficiency in AutoCAD for electrical drawings is essential.
• Familiarity with local electrical codes, standards, and regulations.
• Strong organizational and problem-solving skills.
• Fluency in Chinese (spoken and written) is preferred to communicate with Chinese-speaking site personnel.
• Ability to work independently and as part of a team in a fast-paced environment.

· Ensure thorough understanding of project terms and requirements.

· Review detailed drawings, and provide technical advice on practical design and construction.

· Prepare, schedule, coordinate and monitor the assigned projects.

· Prepare, update and maintain document summary or the necessary documents for projects.

· Prepare and submit the required engineering reports, documents, and drawings to the relevant authorities for approval.

· Update, manage and compile schedules of assigned projects with accurate data and report to the manager.

· Interact with clients to interpret their needs and requirements.

· Cooperate and communicate effectively with the project participants to provide assistance and support, to meet delivery timeline, optimize cost efficiency and meet customer specification.

· Feedback on workflow issues to manager in order to enhance efficiency and productivity.

· Manage all expected / unexpected change orders or deviations during project execution.

· Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.

· Any other job as assigned by the Management from time to time.

Job Description:

• Collaborate with project managers, clients, and development teams to understand user needs, business goals, and design requirements.
• Create user flows, wireframes, prototypes, and high-fidelity designs for websites, mobile apps, and posters.
• Present design concepts to internal teams, stakeholders, and management.
• Identify user pain points and propose research initiatives, including usability testing, surveys, and interviews, to inform design decisions.
• Work closely with cross-functional teams to ensure designs meet business objectives and user needs.
• Ensure designs align with the design system and brand guidelines.
• Collaborate with frontend developers to ensure accurate implementation and participate in front-end development (training provided).

Requirements:

• Portfolio demonstrating visual design, user-centered thinking, research, and analytical skills.
• Proficiency in design tools like Figma or similar. Experience in requirement gathering through workshops, interviews, and research.
• Knowledge of user research methodologies and conducting user testing. Ability to communicate ideas through storytelling, storyboards, mood boards, flowcharts, and presentations.
• Strong verbal, written, and visual communication skills.
• Detail-oriented and ensures designs align with design systems.
• Ability to manage multiple projects in a fast-paced environment.
• Business acumen and understanding of objectives.
• Familiarity with Agile/Scrum, project management, and front-end development is a plus.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Key Responsibilities

• Conduct regular inspections and maintenance of lifeboats, davits, and related safety systems in accordance with SOLAS and IMO standards.
  Perform load testing, release gear inspections, and condition assessments.
  
• Diagnose and repair faults in mechanical, hydraulic, and electrical systems.
  Ensure all repairs meet quality standards and comply with regulatory requirements.
  
• Prepare inspection and maintenance reports for submission to classification societies or flag authorities.
  Maintain accurate records of completed work, including parts and labor used.
  
• Provide technical support and advice to clients regarding lifeboat safety and equipment compliance.
  Offer guidance on preventative maintenance programs.
  
• Stay updated with international maritime safety regulations and standards.
  Ensure work is performed in a safe manner, following company and industry safety protocols.
  

Qualifications

• Diploma or degree in Marine Engineering, Mechanical Engineering, or a related field.
• Certification in lifeboat inspection and servicing (e.g., SOLAS or manufacturer-specific training).
• Proven experience in lifeboat maintenance, repair, and servicing (3+ years preferred).
• Strong knowledge of maritime safety regulations, including SOLAS, IMO, and LSA Code requirements.
• Hands-on experience with hydraulic, electrical, and mechanical systems.