Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

Job Description:

• Responsible for on-site technical and engineering matters.
• Supervise & coordinate day-to-day site works, including sub-contract works, safety and quality control.
• Site inspection & upkeep site record.
• Liaise with consultants, client etc.
• Other duties assigned by PM.

Requirements & Qualifications:

• Graduate Bachelor in Engineering (Civil) or equivalent.
• 3-5 years work experience in Building Construction.
• Able to work independently.
• Autodesk Revit MEP experience will be an advantage

Salary: $6,000 - $8,000 + 15 Days AL

5 Working Days, 9am-6pm(Up to change according to project)

Changi South (Between Bedok / Kembangan MRT)

Requirements:

Degree or diploma and aptitude relevant to Broadcast Engineering (specializing in Broadcast Engineering, including System / Audio Engineering / IT or any other related area).

Safety Knowledge: Good knowledge of the principles of safety at work as applied in the TV industry.

Understanding of OB Systems: Understanding of Outside Broadcast systems and environment.

Knowledge and experience of operating and troubleshooting a range of OB equipment in sound, communication, IP, etc.

Minimum 5-8 years of work experience in Outside Broadcast Environment.

Event Experience: Experience with internatinal scale events is necessary.

Job Scopes: (Before, During & After Project)

Review the operations of the Engineering Department to ensure the quality of broadcast operations meet industry standards.

Remain up-to-date with outdoor broadcast technology and equipment.

Guide the Assistant Engineers to read technical (Auto CAD) engineering drawings and plan for their training where needed.

Ensure procedure for video equipment testing and preparation is in place.

Ensure adequate processes are in place for communication / escalation of technical related problems that arise during a project.

Keep Engineering environment (Warehouse, Engineering Room and desks) clean, functional, safe and presentable.

Ensure compliance of engineering procedures with Health & Safety guidelines.

Supervise and schedule maintenance of specific categories of broadcast equipment to ensure the equipment are fully functional and well maintained (internally and externally clean/dust-free).

Monitor physical and technical quality and appearance of broadcast equipment. Prepare the maintenance & improvement report.

Plan and maintain a list of specific categories of broadcast equipment which require scheduled maintenance.

Responsibilities

• Coordination of Mechanical,Electrical, P&S design and installation.
• Ensure all works are carry out accordingly to drawings, specification, and compliance to authorities’ requirements.
• Site coordination and manage M&E personnel on work progress, drawings, material, samples, method statement submission and approval, to ensure quality and timely completion.
• Manage and Coordinate SWC.
• Preparation of CSD & SEM or CCSM drawings
• Monitoring of construction installation, field coordination and provide necessary problem solving.
• Carry out testing requirement, inspection with consultants.
• Conduct T&C and Handover to Client.
• Proper documentation of all test report, equipment records and As-built drawings.
• Supervision of workers and sub-contractor to ensure safety and compliance of work on site.
• Adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship.
• Other duties as assigned.

Requirements

• Minimum 5 years of engineering experience with Recognized Degree in relevant field.
• Minimum 3 years of supervision experience of M&E work in construction site for projects of similar scale and complexity.

Responsibilities:

• Improve / Create the efficient code merge process to the target codebase
• Configuration management
• Ensure accuracy and quality of installed system, perform functional and sub-system testing
• Be part of system safety group and ensure that safety measures are taken at all times
• Prepare system technical documentation and ensure smooth hand over of the system to operations and maintenance team

Requirements:

• Bachelor’s degree in Computer Science, Engineering, or a related subject
• Programming skills in Python and C++

The AV Service Engineer is responsible for providing technical support, data collection, coordinating maintenance and operation activities to ensure the optimal operation of autonomous vehicles.

Key Responsibilities:

Level 1 Troubleshooting and Technical Support:

• Provide on-site Level 1 troubleshooting support (when activated) and debugging for technical issues encountered. Work with Level 2 support to identify, diagnose, and resolve basic configurations concerns, or minor hardware malfunctions.
• Collaborate with specialized teams or senior engineers to escalate complex issues beyond Level 1 for further analysis and resolution.
• Offer comprehensive customer support by resolving queries, providing technical assistance, and ensuring customer satisfaction.

Data Collection and Analysis:

• Execute routine data collection processes from data loggers, onboard sensors, software systems, diagnostic tools and feedback forms
• Analyze collected data to identify performance patterns, trends, and potential areas for optimization or preventive maintenance

Maintenance Coordination:

• Conduct and facilitate regular inspections, diagnostic tests, and scheduled maintenance for all vehicle assets including on-board equipment to ensure optimal functionality and safety.
• Develop maintenance schedules, ensuring adherence to protocols and manufacturer's guidelines for regular inspections, software updates, and component replacements.

Documentation and Reporting:

• Maintain meticulous records of Level 1 troubleshooting procedures, data collection findings, and maintenance activities performed on the buses.
• Generate detailed reports outlining identified issues, recommended solutions, and actions taken for each maintenance task or diagnostic analysis.

Operational Coordination:

• Coordinate operational activities including scheduling, resource allocation, and route optimization for the AV fleet.
• Collaborate with engineering, operations, and management teams to facilitate coordination between technical tasks and operational requirements.
• Propose and implement improvements to enhance operational efficiency, reliability, and customer satisfaction.
• Any other additional duties not listed above but deemed appropriate for product and operations support by project basis.

Requirements (Must-Haves):

• NITEC or Diploma in relevant Engineering field
• Excellent communication skills and the ability to collaborate effectively with technical teams and stakeholders.
• Experience with hands-on troubleshooting of any of the following: electronics, circuitry, computers, software, mechanical installations

Requirements (Good-to-Haves):

• 1-3 years of hands-on experience in service engineering, technical support and/or operations coordination
• Good understanding of Class 4 autonomous buses equipped with SAE Level 4 autonomy, including sensor technology, control systems, and software.
• Proficiency in Level 1 troubleshooting, data collection methodologies, and coordination of maintenance activities for Class 3 and 4 vehicles and electronics equipment
• Familiarity with Unix (Ubuntu) environment

Job Title: Engineer (CMTD) – Concrete Testing

1. To attend to clients’ enquiries and technical issues
2. To prepare and follow up on quotations sent to clients
3. To open job and follow through the job i.e. testing, report writing, report endorsement and draft invoice preparation
4. To prepare worksheets for new tests and assist to review existing worksheets
5. To lead and assist colleagues/ subordinates to ensure smooth operation of Concrete Lab
6. To provide support in the development of new tests
7. To provide and participate in corporate activities such as safety, internal/external trainings, work improvement, etc.
8. To participate in SAC SINGLAS Accreditation Assessment and achieve approved signatory
9. To support other sections when required e.g. Thermal lab/ Cement Lab/ Cube lab
10. To handle any other assignments, eg. ad-hoc duties and posting, etc. as assigned by supervisor from time to time

Requirements

• Minimum Degree in Civil Engineering
• Keen to learn
• Possess positive attitude

Job Title: Project Engineer (ID9072)
Location: Tuas
Working Hours: Mon to Fri 8.00am-5.15pm
Basic Salary: $3500
Gross Salary: $4000 - $5000

Job Description
-Involve in validation documentation for new machine/product/process/material
-Initiate product reviews. Verifies and test products. Responsible for validation, trial run for new projects and customers.
-Responsible for change control process and procedure development and implementation.
-Responsible for new job development.
-Provide technical support to customers.
-Provide QA support to project development
-Involved in new machine installation and process improvements.

Requirement:
• Min 1 year working experience in manufacturing environment
• Aircon Environment
• Company transport provided at Lakeside MRT, Jalan Boon Lay & Pioneer Mall & Pioneer MRT

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Title: Procurement Engineer (ID5065)
Location: Tuas
Working Hours: Mon to Fri 8.30am – 5.15pm
Salary: $2400 to $4400

Job Description:
• Source and identify suppliers for direct/indirect materials/services to expand supplier base and for new project/production needs.
• Obtain quotes from new sources to provide costing information and cost reduction
• Lead in conducting periodic price negotiation with suppliers to ensure competency in cost for materials/services.
• Be part of team to conduct supplier qualification audit as well as parts qualification to ensure suppliers can meet company needs.
• Qualify suppliers once suppliers are selected in order to add suppliers into the Approved Vendor List.
• Conduct supplier performance review on a regular basis to manage supplier qualification and updates on supplier capabilities.
• Maintain standard operating procedures applicable to the Procurement department to ensure work flow process are consistence.
• Develop and negotiate favorable supply agreement with suppliers.
• Work with other department and suppliers to develop appropriate supply chain model to ensure assurance of supplies with minimal inventory holdings
• Work with other department like Engineering/Warehouse to ascertain quality standards of items supplied and established Quality plan
• Provide periodic quotation template to Sales department for standard products.
• Provide quotation to Sales department based on scope of supplies required by Customers.
• Any other task/project assigned by management

Requirement:
• Fresh graduate in Degree in Mechanical Engineering or Diploma in Mechanical Engineering with 2-3 years relevant experience
• Diploma holders at least 2 years exposure in components sourcing and fabrication parts.
• Proficient in Microsoft Word and Excel

The Lee Kuan Yew Centre for Innovative Cities at the Singapore University of Technology and Design is seeking a full-time Research Fellow or Research Associate, to join a growing research team dedicated to understanding human behavior in cities.

Successful applicants will contribute to a research program that explores the intersection of human behavior, urban design, technology, and livability. The program tackles critical questions about how cities shape people’s behaviors and, in turn, how cities should be designed to better serve their inhabitants.

Candidates should possess a strong interest in applying a human lens to transdisciplinary and collaborative research. Expertise in quantitative research methods and a background in social and/or behavioral science will be a plus.

This position is ideal for individuals interested in pursuing an academically grounded, applied research career.

The candidate will be expected to:

• Conduct and write literature reviews
• Participate in fieldwork and data collection
• Conduct quantitative and/or qualitative data analyses
• Contribute towards research conceptualization and methodology
• Assist in the preparation of manuscripts and reports for publications
• Collaborate and communicate research updates with both internal and external stakeholders

Skills and qualifications required:

• Obtained or expected Masters degree (for Research Associate) or PhD degree (for Research Fellow) related to the social sciences or behavioural sciences (e.g., Psychology, Behavioral Economics, Urban Studies, or related disciplines)
• Demonstrable skills in quantitative and/or qualitative data collection and analysis
• Excellent written and verbal communication skills
• Strong organizational and data management skills
• Proficiency with statistical software (e.g., R, STATA, SPSS, MPlus) is a plus
• Familiarity with Augmented Reality, Virtual Reality and/or neuroscience (e.g., fNIRS) research is a plus

How to apply:

Interested applicants are encouraged to send their application with the subject heading – Research Fellow/Associate (Urban Psychology Lab) to [email protected] with the following:

• Cover letter explaining your interest in the position and addressing the qualifications and skills requirements (1-2 pages)
• Curriculum vitae
• Two writing samples of publication or research work
• Three referees who may be contacted for a reference

Enquiries about the position can be addressed to either Samuel Chng ([email protected] ) or Sarah Chan ([email protected])

Appointment(s) will be initially made on contract basis for up to two years, renewable subject to good performance and mutual agreement.

We regret that only shortlisted candidates will be notified. Review of applications will commence from October 2024 on a rolling basis. Applications will be considered until the posts are filled.

Carbon Capture Composite Materials

Recruitment for Research Assistant / Research Engineer / Senior Research Assistant

A research assistant position is available at the Singapore University of Technology and Design. The successful candidate will work on the design and synthesis of composite materials for carbon capture applications. The research assistant should have experience in composite material synthesis and fabrication using solution chemistry methods. Desired skills include demonstrated experience with solution-based chemical synthesis, surface functionalization of materials (e.g., ligand exchange, polymer grafting), or polymeric composite fabrication methods. Additionally, the research engineer will also be working closely with the engineering team to implement an innovative gas separation system. The research engineer will also be involved in the development of customized lab-based and field tests to evaluate the performance of the material.

Job Requirements:

• Possesses a Bachelor or Master’s degree in Chemistry/Materials Science/Chemical Engineering or relevant field
• Excellent written and oral communication in English
• Able to work and learn independently and in teams in a multidisciplinary setting
• Possess a high level of personal initiative and motivation

Specific Responsibilities

• Fabrication and characterization of materials
• Lab-based and field tests of composite systems
• Assist with research lab maintenance and safety, as well as managing of lab equipment
• Drafting of professional reports and presenting results to the research team on a regular basis

How to Apply

Applicants should send the following documents:

1. curriculum vitae,
2. two references and
3. a writing sample or examples of any published works including final year projects or thesis to Prof. Mei-Chee Tan, [email protected]

We have several available postdoctoral and research assistant positions at the Singapore University of Technology and Design (SUTD) to work in the area of Robotics. This position focus on supporting the design of algorithm for various robotics applications.

Qualification:
- Relevant Degree in Electrical Engineering, , Mechanical Engineering, Robotics, or related areas
- Strong hands on experience Preference will be given to those with prior robotics project experience such as:
1) SLAM;
2) ROS;
3) Sensor fusion;
4) Machine Learning;
5) Mobile platforms (eg: wheeled robots, legged robots); and
6) Manipulators

Applications, assembled as a single PDF file, should contain a complete resume, full list of publications, as well as the names and contact information of up to three references.

Interested applicants may send his/her CV to Assoc/Prof U-Xuan Tan via email ( [email protected] ). Review of applications will continue until the position is filled. Only shortlisted candidates will be notified.

We are seeking a skilled Mechanical Engineer to join our team in developing the chassis and mechanical components for a state-of-the-art portable MRI system. This role involves the design and integration of high-precision mechanical components, electronic housings, and thermal management systems, focusing on optimizing manufacturability and durability for portability.

The ideal candidate will have expertise in CAD, additive manufacturing (AM) processes, and a strong background in mechanical design for high-tech medical devices or electronics enclosures.

• Design and develop the MRI chassis and mechanical housing for electronic components, ensuring that all designs meet specifications for strength, weight, thermal stability, and compliance. Ensure designs are optimized for manufacturability and assembly, using knowledge of advanced manufacturing techniques.
• Develop detailed CAD models, assemblies, and technical drawings of chassis, mounts, and enclosures using CAD software SolidWorks. Conduct finite element analysis (FEA) and other simulations to assess structural integrity, thermal performance, and material suitability.
• Lead efforts in prototyping, working with AM processes (SLS, SLA, MJF, DMLS, etc.), CNC,or traditional methods to create high-fidelity prototypes.
• Troubleshoot and solve design issues identified during testing, iterating quickly to improve reliability and performance.

Required/Desired Skills

• CAD Proficiency: Advanced skills in 3D CAD software (SolidWorks, Creo, or equivalent) with experience in generating fully constrained assemblies.
• Manufacturing Knowledge: Strong understanding of AM techniques, post-processing methods, and experience working with CNC, sheet metal, and injection moulding.
• Problem-Solving: Demonstrated experience in root cause analysis, DFMEA, and quick iteration on designs to address complex engineering challenges.
• Testing & Analysis: Hands-on experience with FEA tools, prototyping, and validation testing.
• Soft Skills: Strong communication skills, detail-oriented, and ability to work in a cross-functional team environment.

Required/Desired Qualifitaion & Experience

• Bachelor’s or master’s degree in mechanical engineering, Mechatronics, or a related field.
• 3+ years of experience in mechanical design, preferably with medical devices, high-tech enclosures, or electronics housings.

Job Description:

- Perform Civil, Structural Analysis and Design (entry-level) to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- Reporting to Senior Engineer

Job Requirements:

- Candidate must possess at least a Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 1 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

- Candidate with longer experience or qualifications will be considered for Senior Positions

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Located at Chai Chee

Precision industry (Clean room)

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Assist Supervisor in day-to-day operation lines.
• Planning & Co-coordinating the workflow on production lines to achieve production targets.
• Trouble shooting production problems and assist in planning new project work.
• Groom to become Leader

Requirements

• Diploma in Precision Engineering
• No experience required

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

1. Must be able to lead a group of Technicians and Take care of their safe working responsibilities.

2. Guide the subordinates to check and troubleshoot hydraulic systems onboard the vessels

3. Must have strong Knowledge of Hydraulic systems and able to read Hydraulic schematic drawings.

4. Hands-on experience with hydraulic motors, pumps, and their related systems.

5. Familiar with the steering gear systems, deck hydraulic Machinery, ballast and cargo remote control valve operating systems.

6. Able to handle the projects independently and must have knowledge about documentation, project costing, safety formalities etc.,

Job Description:

• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned from inception to completion within the specified timeframe and of the desired quality.
• Liaise with authorities, consultants and subcontractors.
• Implement architectural and structural works.
• Good communication skills to enhance good team working spirit.

Requirements:

• Experience in management of projects will be advantageous.
• Recognized degree in Civil/Structural Engineering by P.E. Board / BCA.
• Initiative, self-motivated, possess a strong drive with high responsibility and result oriented.
• Preferably 1 - 5 years working experience in Civil & Structural works.
• Experience in engineering software and AutoCad would be an advantage.
• Fresh graduates may apply.

Position Summary

You are responsible for production, assembly, design and development of hardware and equipment the Company’s products. The job also involves sourcing of components, participating in technical design, working with Software Engineers and/or Project Manager in budgeting, scheduling, management of contractors, and installation, deployment and maintenance of the products in an operational environment (on-site when required).

Main Responsibilities

• System set-up; troubleshooting, resolution of anomalies discovered in equipment and methods, provision of assistance in maintenance service
• Installation of equipment room racking, servers and UPS. cable works for power and communication
• Installation and maintanance of electrical and Instrument equipment
• Installation, configuration, testing and maintenance of operating systems, application software and system management tools. Ensuring the highest levels of systems and infrastructure availability and security.
• Managing and monitoring all systems and infrastructure.
• Collation of information on hardware systems, costs of development, work program and technical specification
• Participation in the development and testing process, systems testing and commissioning
• Provision of support of design and installation of ‘turnkey’ and / or ‘user-defined’ system
• Sourcing and identification of suppliers for evaluation
• Conduct of preliminary assessment on systems requirement of the clients and matching with components recommended by sub-contractors
• Provision of assistance in systems deployment, system implementation and / or installation
• Performance of corrective, preventive maintenance work in-house or at customer site (on-site)
• Implementation of enhancement/upgrades as instructed
• Preparation of documentation and logistics support where necessary
• Travelling maybe required from time to time

Skills and Experience

· Minimum 5 years hands-on experience in electrical and electronic system set-up, installation, servicing, troubleshooting, and maintenance

· Strong debugging skills

· Strong team work as well as able to work independently

· Well-versed in:

Micorsoft Windows Server and Desktop Operating Systems

Microsoft Office

Single-Line Diagram

Electrical Drawings

· Experience in:

Hands-on Unit Testing

Hands-on Integration Testing

AutoCAD

Network Diagrams

Project Management

· Competency in:

IT Network installation, configuration, and administraton

IT Systems installation, configuration, and administraton

· Knowledge of:

Cyber Security concepts and implementation

iOS and Android platforms

Microsoft Project

Minimum Qualifications

· Degree in Electrical or Electronics Engineering, or equivalent practical experience

· Practical experience in:

System set-up, installation, servicing, troubleshooting, and maintenance

Attributes

· Critical thinking and problem-solving skills

· Strong interest and awareness of new technologies

· Proactive with good time-management skills

· Good interpersonal, analytical and communication skills;

· Ability to:

Multi-task, prioritize activities, work independently and calmly under pressure

Interact positively, clearly and professionally with peers, customers and vendors

Anticipate and take proactive actions

The Ideal Candidate

· You possess big picture thinking, a willingness to learn, dive into unfamiliar systems and resolve complex issues both from a business and technical perspective.

Job Responsibilities

• Develop object detection and tracking using deep learning and machine learning.
• Maintain and optimize algorithms of the existing system framework related to computer vision and deep learning.
• Maintain and optimize existing web and Android applications.
• Collaborate with the engineering team to deliver complete systems and products.

Job Requirements

• Candidate must possess at least Bachelor’s Degree/ Post Graduate Diploma/ Professional Degree in Computer or Electronic or equivalent.
• Required skills: Object Oriented Programming languages (E.g. C++ in Qt and Visual Studio), Python.
• No prior working experience is required.
• Knowledge of image processing and computer vision will be an advantage.
• Experience in OpenCV or Pytorch or Tensorflow will be an advantage.
• A team player who can work under stress and independently.

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, Instrumentation or a related field
• 6 + years of experience in instrumentation and control system design, analysis, and implementation
• Proficiency in using CAD software for control system design
• Experience with control system programming and software tools such as PLC programming, DCS programming, or SCADA systems
• Knowledge of codes, standards, and regulations related to instrumentation and control systems,
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• Experience with industrial processes and equipment, such as pumps, motors, and valves