Key Duties:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables (DTS,MSS,RFI)
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Job Requirements:

• Minimum 5-8 years work experience in related environment
• Experience in ACMV & LTA/SMRT projects would be highly advantageous
• Higher NITEC in Mechanical Engineering
• Advanced skills using company software would be highly advantageous
• Design thinking for product inventions and enhancements

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Primary Objectives of Position

• Lead a team of senior / technicians to carry out scheduled Preventive Maintenance and Corrective Maintenance together on passenger trains/engineering vehicles/light rail vehicles/component/equipment as assigned by supervisor.
• Ensure the team comply with all PM & CM works and related tasks with approved work instructions, quality procedures, safety and operational procedures, and good maintenance standards.
• Plan and coordinate within the team and other teams to complete the assigned maintenance tasks within the established standard time.
• Ensure the team has the necessary qualifications and authorization to carry out daily tasks and any assigned tasks by supervisor.
• Responsible for the safety, welfare and discipline of the team.
• Responsible for the upkeep of the team equipment/tools and working environment

Major Responsibilities

• Responsible for team's quality and standards of the PM/CM works within the established standard time and be competent to carry out preventive and corrective maintenance tasks within the established standard time in accordance to work instructions and related documents, as assigned by supervisors.
• Exercise safety always, in accordance to established safety procedures.
• Responsible for the safety of self and all co-workers, inclusive of contractors.
• Demonstrate sufficient ability in diagnostic and troubleshooting electromechanical systems.
• Forecast and plan his team and resources to complete maintenance tasks and assigned tasks timely.
• Perform supporting maintenance activities such as Train Driver/Shunter, overhead crane operator, forklift driver, etc. as authorized and required by the supervisor.
• Able to work on a shift roster system in accordance with the MOM guidelines and the Collective Agreement.
• Undertake any other tasks or functions that are incidental or ancillary to the performance of the works assigned by supervisor.

*The above activities are no means exhaustive and are subjected to amendment whenever is needed.

Specific Safety Responsibilities

• Undertake daily safety checks on trains and only signs trains off as fit for service after they have been properly checked.
• Carry out repairs on trains in a safe way according to training received and only signs the work off as complete after thorough checks have been carried out.
• Undertake work in accordance with Company Rules and Procedures.
• Remains constantly vigilant for unexpected defects on trains and report them immediately to his Supervisor.

Job Specifications

• Higher Nitec (with Experience) or Diploma in Engineering (Electrical/Electronic/Mechanical/Mechatronic Engineering).
• Minimum 2 years relevant working experience in maintenance/repair/installation of electrical or mechanical equipment.
• Fresh graduate with good academic results will also be considered.
• Experience in railway environment will be an added advantage.
• Must have analytical & fault-finding skills.
• Understand at least two of electrical/electronic/air conditioning/pneumatic/mechanical system.

Attributes

• Good working attitude with strong commitment to job assignments.
• Able to communicate well with staff at all levels.
• Have good initiatives and strong trouble shooting skills.
• Demonstrates strong leadership qualities and is capable of motivating teammates
• Required to work on 3 rotating shift and required to be on 24 hours standby round the clock for any unforeseen emergency recall.

We regret to inform that only shortlisted applicants will be notified.

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 12 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of Hospital and Architecture work
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Experience : 6 + Years

12 months Contract

Willing to work in 24/7 shifts ( Morning , Afternoon & Night )

Position Overview:
We are seeking a highly skilled Site Reliability Engineer (SRE) to provide Level 2 technical support

. The ideal candidate will handle critical tasks such as transaction investigations, scheme rejections, dashboard creation, application monitoring, and incident resolution, while ensuring seamless operations in a 24/7 environment.

Key Responsibilities:

1. Technical Support:
   • Provide Level 2 technical support for the application.
   • Investigate transaction inquiries and ensure timely resolution.
2. Monitoring and Analysis:
   • Create dashboards in Kibana for real-time monitoring of critical applications.
   • Fetch and analyze application logs from Kibana and Linux servers to investigate issues.
3. Data Management and Reporting:
   • Write and execute SQL queries to extract data for business requirements.
   • Generate financial reports in Oracle to meet audit and compliance needs.
4. Incident and Change Management:
   • Provide 24/7 support to resolve P1 incidents within SLAs.
   • Create and implement change requests for bug fixes, OS/server patching, and application restarts.
   • Support all infrastructure-level activities for the applications.
5. Disaster Recovery (DR) Support:
   • Deliver 24/7 DR support for the business.
6. Documentation and Process Improvement:
   • Prepare knowledge transfer (KT) documents for new processes and technical troubleshooting.
   • Investigate deviations from standard processes and escalate as per the escalation matrix.

Skills and Experience:

• Strong expertise in transaction processing platforms.
• Proficiency in SQL and experience in generating reports in Oracle.
• Hands-on experience with Kibana for dashboard creation and log analysis.
• Solid understanding of Linux servers and command-line tools.
• Experience with change management processes, including OS/server patching and application maintenance.
• Proven ability to handle P1 incidents under tight SLAs in a 24/7 support environment.

Qualifications:

• Experience in supporting merchant acquiring or payment gateway applications in a Bank
• Experience of financial transaction workflows, clearing, and settlement processes.
• Familiarity with ITIL processes for incident and change management.

Work Conditions:

• 24/7 support , willing to work in rotational shifts
• Willingness to support disaster recovery operations and participate in weekend or after-hours maintenance activities.

Job Description:

· Responsible in the design and development of highly complex and scalable Python modules.

· Take ownership of end-to-end technical delivery against project timelines and requirements.

· Participate in requirement analysis while recommending alternative solutions.

· Integrate applications using middle ware software’s such as Avro kafka and database design.

· Deploy applications to open shift via CICD pipeline.

· Working with application support, developers, and product owners to ensure successful releases.

· Flexibility to work extra hours to meet corporate and departmental goals.

· Must have the ability to prioritize and manage multiple concurrent tasks in a fast-paced environment while working

under pressure.

Job Requirements:

· Degree in Computing / Computer Science / Engineering preferred.

· 3 to 8 experience preferably in the financial / fintech industry.

· Experience in supporting trading desk

· Experience in Agile/Scrum methodology.

· Excellent troubleshooting and debugging abilities for 2 tier and multi-tier applications.

· Should have worked as first line application support for trading systems and back office with experience in

analysing of issues raised by end users and general system checks and maintenance tasks.

· Strong analytical & problem-solving skills.

· Experience in documenting the design and development work in confluence.

· Expertise in Python (OOPs Concepts, flask/Django frame works, multi-trading, web sockets, and analytics tools such

as pandas, NumPy etc).

· Highly Experienced in Database designing of SQL and PL-SQL with expertise in at least one RDBMS, preferably Maria

DB and MS- SQL.

· Highly Experienced in writing batch scripts using shell scripting.

· Experience in Linux, OpenShift, Avro based kafka, Dockers, Nginx, Sentinel Redis, AngularJS basics, Rest API’s (Flask),

JSON and web sockets amongst others.

· Experience in CI-CD (Continuous Integration Continuous Delivery) pipeline with experience in Bitbucket.

We are looking for a Package-Silicon Integration Engineer in Micron's Package Development Engineering (PDE) Group, who will be responsible for driving advanced package development for next generation silicon and package technologies. You will collaborate with various functional teams such as silicon wafer design, package design, wafer fab to meet project requirements. You will drive the technology development through multiple phases of product maturity and contribute to Micron's strategic objectives of Technology leadership.

RESPONSIBILITIES include but are not limited to:

• Work with package design and development teams to complete chip package interaction risk assessment.
• Work with scribe designers and assembly engineers to find solutions for dicing problems and implement relevant design rules/FMEA.
• Work with die designers to enable design for manufacturing in area like die size, scribe width and pad size.
• Collaborate with R&D/manufacturing wafer fabs and packaging teams to solve relevant issues, and improve yield, quality and manufacturability.
• Contribute to development of new silicon and package technologies by engaging with Micron’s internal factories.
• Define test vehicles, plan DOEs, characterize enabling technologies, document best-known-process and hand-off to manufacturing.
• Identify technology, quality, business process gaps and develop solutions.

EDUCATION, EXPERIENCE & QUALIFICATION REQUIRED

• Masters or Bachelor’s degree in Engineering (Mechanical, Materials Science, Electrical, Chemical) or related field
• 3-5 years of semiconductor fab/Assembly experience in Integration
• Strong Project / Program management skills
• Possess sound methodology for organizing work, decision-making and setting priorities
• Strong analytical, problem solving, and organizational skills
• Proficiency in computer applications like Excel, Word, Power Point.
• Self-motivated and team oriented.
• Strong interpersonal, oral and written communications-skills.

Keen on the role? Apply now!

Working location: Thomson

Job Summary:

This role is responsible for overseeing the testing and commissioning of electrical equipment on-site, ensuring adherence to project specifications and safety standards. The successful candidate will play a key role in verifying the proper installation and functionality of electrical systems, collaborating with clients and contractors to achieve successful project completion.

Key Responsibilities:

• Directly supervise and coordinate on-site testing and commissioning activities for electrical equipment, ensuring compliance with relevant codes, standards, and project requirements.
• Review, prepare, and submit comprehensive site acceptance test reports, documenting test procedures, results, and any identified discrepancies. Maintain accurate records of all testing and commissioning activities.
• Thoroughly review single-line diagrams, electrical schematic drawings, and other technical documentation to ensure proper system understanding and identify potential issues.
• Conduct and/or assist in electrical equipment installation inspections to verify compliance with design Actively participate in site activities and meetings involving clients, contractors, and other stakeholders, providing technical expertise and ensuring effective communication.
• Identify and troubleshoot electrical system issues during testing and commissioning, implementing corrective actions as needed.
• Enforce strict adherence to all safety protocols and procedures during testing and commissioning activities to ensure a safe working environment.
• Undertake tasks and assignments as directed by the Commissioning Lead, prioritizing effectively and meeting deadlines.

Job Requirements:

• Degree in Electrical Engineering
• Minimum of 2 years of local working experience in electrical testing and commissioning within a relevant industry (e.g., construction, infrastructure, power generation).
• Solid understanding of electrical principles, codes, and standards (e.g., IEC, IEEE, BS).
  Proficiency in interpreting single-line diagrams, electrical schematics, and other technical drawings.
  Practical experience in testing and commissioning MV/LV electrical equipment (e.g., switchgear, transformers, protection relays, cables).

*Able to start work within short notice will be highly advantageous.*

Please be notified that only shortlisted candidates will be notified

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: YEO AHN AHN

EA Personnel No: R22109014

EA License No: 21C0845

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Technology Solutions Office is looking for Lead Software Engineer (Java)

Internal Code: A25022

What will you do?

• Manage a team of software engineers, including task planning and code reviews
• Take charge of technical projects and provide leadership in a fast-paced environment
• Responsible for the overall planning, execution, and success of complex technical projects
• Work closely with project management and experience design team to deliver project outcomes
• Contribute technically to projects
• Mentor the best talent bringing out the best in every engineer
• Nurture a culture of high performance, continuous improvement, creative problem solving, and innovation within the team

What are we looking for?

• Strong experience with Java Technologies
• Experience in ReactJS is a plus
• Software support and maintenance of deployed products and solutions
• At least 5 years of total software engineering experience with a thorough understanding of commercial software product development.
• 3+ years of experience in a software engineering leadership position
• Customer oriented and skilled in developing a strong understanding of customer needs and marrying those with optimal technology solutions
• Knowledge of Object Oriented Programming and SQL
• Ability to manage a hosting environment, including database administration as well as scaling applications to handle load changes
• Understanding of front-end web technologies
• Experienced in developing on Unix/Linux environments
• Enjoy constant learning and working with new technologies
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is required

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Summary: We are seeking an experienced and detail-oriented Network Security Engineer to join our team. The ideal candidate will have hands-on experience in managing and configuring Cisco wireless infrastructure, switches, and routers, as well as proficiency with Palo Alto and Checkpoint Firewalls.

Key Responsibilities:

• Cisco Wireless Infrastructure Management:

o Configure, deploy, and manage Cisco wireless access points and controllers to ensure reliable wireless network connectivity.

o Troubleshoot and resolve issues related to wireless network performance, coverage, and security.

o Managing the Cisco ISE.

• Cisco Switches and Routers Management:

o Install, configure, and maintain Cisco switches and routers for optimal network performance.

o Perform network troubleshooting, identify bottlenecks, and implement solutions to ensure network reliability.

• Firmware Upgrades:

o Upgrade firmware for wireless devices, routers, and switches as part of regular network maintenance and improvement.

o Ensure minimal disruption during firmware updates and troubleshooting any issues that arise.

• Network Monitoring with SolarWinds:

o Utilize SolarWinds for continuous monitoring of the network infrastructure, including switches, routers, and wireless systems.

o Respond to alerts, troubleshoot network issues, and optimize network performance based on monitoring data.

• Firewall Management (Palo Alto, Checkpoint):

o Configure and maintain Palo Alto and Checkpoint firewalls to ensure network security and integrity

o Monitor firewall performance, implement policy changes, and respond to any security incidents or alerts.

Required Skills and Qualifications:

• Proven experience in managing and configuring Cisco wireless infrastructure, switches, and routers.

• Strong knowledge and hands-on experience with SolarWinds network monitoring tool.

• Proficiency in managing Palo Alto and Checkpoint firewalls.

• Strong troubleshooting skills for network and security-related issues.

• Ability to perform firmware upgrades for network devices and equipment.

• Familiarity with network security practices and protocols.

• CCNP (Cisco Certified Network Associate) certification or equivalent is a plus.

• Experience with network documentation and creating network diagrams.

Preferred Skills:

• Advanced Cisco certifications (CCNP) or equivalent.

• Knowledge of other network security platforms.

• Experience in implementing network automation or orchestration tools.

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Technology Solutions Office is looking for Software Engineer

Internal Code: A25025

What will you do?

• Work with project leads, developers and operations on a live commercial project that has more than one million users on its platform.
• Software support and maintenance of deployed products and solutions
• Work closely with project management and experience design team to deliver project outcomes

• Strong hand-on experience in NodeJS Technologies
• Solid hand-on experience with AngularJS, ReactJS
• Knowledge of Object-Oriented Programming and SQL
• Experience with React Native, Microsoft SharePoint is a plus
• Proficient knowledge of languages such as .NET and/or Java will be a plus
• Ability to manage a hosting environment, including database administration as well as scaling applications to handle load changes
• Experienced in developing on Unix/Linux environments
• Effective communication skills & customer-oriented mindset
• Ability to work with a multiple team and stakeholders
• Enjoy constant learning and working with new technologies
• Excellent critical thinking and problem solving skills
• Experience in public sector projects is a plus
• Candidates who had previously managed small teams will be considered for the Senior/Lead positions
• Appointment will commensurate with experience and qualification.
• A Pass in ICT Assessment Certification for Solution Architect or Software Developer by NUS-ISS is strongly preferred.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Remuneration: $3,500 - $4,000

Working Hours: Mon - Fri, 7:30am - 5pm

Key Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.

Job Description:

• Minimum 2-3 years working experience in manufacturing environment.
• Nitec / Higher Nitec / Diploma in M&E or Mechanical Engineering
• Able to supervise and lead the subordinates.
• Willing to work after working hour or during non-working days.
• Able to work under pressure.
• Computer literate.
• Knowledge in ISO would be highly advantageous

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

We are looking for a passionate software developer to help us to build enterprise portals. You will work with a team of engineers, from Singapore as well as overseas to design and implement features that keep our solutions up to date and perform beyond expectation.

Role and Responsibilities:

• Develop portals & solutions with high performance
• Translate product requirements to relevant features presented to the end-user
• Maintain and enhance existing implementation as necessary to support customer's requirements
• Research and develop new technologies, frameworks, and tools
• Perform any other ad-hoc tasks assigned by superior

Requirements:

• Advanced Diploma / Bachelor's degree in related field or equivalent experience
• Familiar with web application development
• Good knowledge on programming methodology
• Ability to multi-task in a demanding, fast paced environment and deliver ideas
• Work independently as well as in a team
• Organized, self-motivated, enthusiastic, and looking for rapid learning capability
• Existing languages: Javascript, HTML, CSS, JavaScript libraries like React, Database like Oracle, SQL
• Knowledge on Java, Jenkins, Integration Testing and other Server Technologies would be a plus

Role Profile

This technical solution focused role is accountable to setup applications and database and ensure their optimal performance to support various GovTech projects.

Key Responsibilities:

• Setup the application and database
• Perform analysis and review software application functionality and design and suggest improvement to enhance the design to cater for new services
• Consult with software development team, internal users, and clients to improve application performance
• Administer the application including user account management and configuration of the application
• Generate Test Plans and Test Procedures for User Acceptance Tests (UAT)
• Conduct UAT and prepare final UAT Reports
• Keep a record of configuration changes and scheduling application updates
• Support production issues such as establishing root causes of application issues and liaise with the software vendor to resolve issues
• Take care of application migration and new release roll-out
• Document processes and monitor application performance metrics
• Develop tools needed by L1/L2 that will help them with their investigation process
• Ensure all work activities comply with the company’s safe work procedures

Competence (Knowledge, Skills and Abilities):

• Good understanding of the software and hardware environments for CCTV/networked cameras system
• Proficient in Video and IoT management application, software analysis and design, as well as proposal write up
• Good knowledge on the key features of the CCTV / Networked Video / Security Camera / Video Management product in the market
• Sound network knowledge (Internet Protocols, TCP/IP, DNS, DHCP, SNMP, Network Architecture etc.)
• Familiar with Golang, Node JS, JavaScript, Windows Server OS, CentOS, Ubuntu OS and MongoDB

Requirements:

• High level problem solving and communication skills
• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction

Education & Experience:

• Bachelor’s Degree in Computer Science, Information Technology, Software Engineering or related field
• At least 3-5 years working experience in Video and IoT Management application, software analysis and design

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Job Purpose:

To support the Program Manager in strengthening existing customer relationships and ensuring smooth day-to-day operations, which include New Product Introduction (NPI), Order Administration, BOM Management and Planning.

Job Description:

1. Customer Relationship Management

• Build and maintain strong relationship with customers by identifying and assessing customers’ current and future needs
• Timely fulfilment of customers’ orders or communication of schedule revision
• Liaise with internal departments to ensure orders will be fulfilled on time
• Respond to all customers’ inquiries promptly
• Prepare and provide reports and proposals to customers as required
• Support customers’ audits and visits when necessary

2. New Product Release

• Responsible for ECN (Engineering Change) and new BOM (Bill of Material) management, which includes item master creations.
• Ensure that all ECNs and BOMs are cross checked before releasing it and any ad hoc amendment to the BOM through internal ECN or waiver
• Manage FAA (First Article Approval) submission and approval.
• Define Production Routing Guide for manufacturing
• Ensure packing handling units (carton & palletization) are defined accordingly
• Maintain customer part numbers in ERP system
• Manage EOL (End of Life) of products.
• Handles new customer requirement that involves ERP system update and UAT
• Work together with manufacturing engineer & production to define the relevant process or packing instruction
• Maintain the relevant documents pertaining to BOM management, which includes work instruction, sticker placement
• Interface customer with respect to NPR, ECN, and FCS launch management
• Prepare samples for customer review/approval
• Prepare and participate in customer audit on new SKUs or artwork
• Create BOM structure for all new product release from sketch and maintain item, BOM, ECN and void in customer's SAP as per customer requirements

3. Report and Masterlist Tracking

• Ensure FAA Tracking List and BOM masterlist are well maintained
• Prepare launch tracking report
• Prepare QBR data on relevant sections
• Prepare weekly/ monthly reports as requested by customers and management

4. Order Processing

• Acknowledge and process sales orders, coordinate with various departments and related parties to fulfil order
• Prepares samples, price estimates and quotations within customer’s expectations and timeframe
• Creates work orders for production and replacement work orders if necessary
• Ensure prompt billing of invoices and assist in overdue payment collection
• Manage customer’s product content effectively

5. Material Planning

• Plan and make purchase requisition for necessary materials to ensure materials availability in meeting production needs while minimizing inventory holding/costs
• Manages inventory level for raw materials, work-in-progress and finished goods
• Analyse order trends and prepare forecast schedule to material planner

6. Productivity and Innovation

• Identify potential improvement initiatives
• Implement feasible improvement initiatives to enhance effectiveness, efficiency and/or economy

Job Requirements:

• Diploma/Degree in Business Administration, Supply Chain Management or other relevant fields
• 1 – 2 years of experience in operations/supply chain environment (Program Administrator)
• 3 – 5 years of experience in operations/supply chain environment (Senior Program Administrator)
• Strong interpersonal skills with good presentation and communication abilities
• Independent and proactive, with strong customer service orientation.
• Experience in printing and packaging industry will be an added advantage
• Knowledge in MRP and SAP systems will be added advantage

- The Solar Photovoltaic (PV) and Energy Storage Systems (ESS) Asset Maintenance Engineer leads in the operations and maintenance of solar PV ,Hot water and ESS

- Establishes new methods to optimise system performance and improve maintenance processes.

- He/She prepares cost estimates for maintenance and verifies claims on repair works.

- He/She occasionally works outdoors at solar PV, Hot water and ESS sites.

- He/She is systematic and has good problem-solving skills in leading the operations and maintenance works

- He/She has good leadership and communication skills to engage his/her stakeholders.

- He/She is also service-oriented and ensures customers are satisfied with the services provided.

- He/She to Create Maintenance Schedules

working location: Ang Mo Kio , Yio Chu Kang, Central

Job Description

Manage & Lead the electrical team.

Perform engineering duties such as design, engineering calculations, planning, tender. Preparation/evaluations as part of the engineering project team

Team development QA/QC documentation review of engineering deliverables

Liaison with clients, project managers, architects, contractors

Resolve any technical problems faced during project design and/or construction stages

Suggests ways to increase revenues and efficiency.

Testing & Commissioning of the ACMV Electrical Systems

Ensure the team follows all electrical codes and standards.

Job Requirements

Any qualification in a relevant engineering field with minimum 5 years of related working experience in the Construction Electrical Field associated with ACMV / Electrical.

Engineering design of commercial buildings, major infrastructure transportation projects and mixed-use developments

Possess design experience and good understanding of ACMV / Electrical technical systems and procedures.

Possess knowledge on all cabling, loading and sizing calculations and equipment selections such as cable, generators, panels, etc.

Develop, design through establishing, design briefs, design reports, calculations, schematics, schedules, specifications, concept, Preliminary, Detailed and Construction Engineering Designs

Productions of drawings and developing models Site Experience, Testing & Commissioning Experience Having experience working with Infrastructure Projects would be an added advantage.

*Able to start work within short notice will be highly advantageous.*

Please be notified that only shortlisted candidates will be notified

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

EA Personnel Name: YEO AHN AHN

EA Personnel No: R22109014

EA License No: 21C0845

Summary:

• Specialise in commercial outfitting, interior design consultancy
• Basic salary up to $3800
• Variable bonus + Performance bonus
• $800 wellness package per annum
• Location: Potong Pasir
• 5 days work week @ 9am - 6pm

Key Responsibilities:

• To prepare tender bids for submission
• Documenting any changes in design and updating budgets
• Review and understand all drawings and specifications
• Monitor project costs to ensure objectives of the project are achieved in accordance with company standards and building contract law
• Responsible for coordination with contractors, suppliers, and other parties
• Handle pre or post-tender procurement which includes sourcing and negotiating with suppliers
• Tabulate and evaluate price comparison and prepare cost analysis / cost reduction strategies
• Handle project administration and documentation
• Other related duties assigned by the manager

Requirements:

• Min 1 year experience in ID field
• Experience in full interior fit-out projects
• Familiar with the entire bidding process

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

As an Associate Engineer in Product Support Organization, within the Aftermarket Products & Services (APS) Business Unit, this role is responsible for the technical activities that support the repair and refurbishment of goods. This includes the completion of the quality of goods meeting schedule timelines.

The Associate Engineer ensures smooth repair and refurbishment of goods:

• Repair and refurbishment support: Ensure assemble of goods with accuracy
• On time delivery: completion of work order within the scheduled time frame

Responsibilities

• Create repair and/or refurbishment work orders.
• Expedite support and coordinate the replenishing of materials and work with materials planners to proactively solve raw material issues.
• Ensure materials are issued correctly as per work order.
• Perform Troubleshooting and Diagnostic based on Troubleshooting Guide
• Perform bonding and data collection based on Standard Work Instruction and Test Procedures (~2 - 4 hours standing and using microscope)
• Disassembly, assembly and Testing of Mechatronics Assemblies module to Standard Work Instruction and Test Procedures.
• Update system records in a timely upon completion.
• Support Agility Training to all Product Lines based on Supervisor’s assignment.
• Performs other duties as assigned.

Qualification

• Minimum qualification of Vocational Certificate/NITEC in Electrical or Mechanical Engineering
• Minimum experience of 2 years in the semiconductor/ manufacturing industry
• Basic knowledge of wire bonding and/or die bonding technology is preferred
• Able to work independently to troubleshoot and analyze machines and spares issues when needed
• Possess good written and communication skills
• Proficient in Microsoft Office (Excel, PowerPoint and Words)

Company Overview

Founded in 1951, Kulicke and Soffa Industries, Inc. (NASDAQ: KLIC) specialize in developing cutting-edge semiconductor and electronics assembly solutions enabling a smarter and more sustainable future. Ever-growing range of products and services supports growth and facilitates technology transitions across large-scale markets.

Please refer to the website for more details: www.kns.com.

Equal Opportunity

Kulicke & Soffa recruits on the basis of merit (such as skills, experience or ability to perform the job), regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

BROAD FUNCTION

A dedicated and proactive IT Support Engineer with a strong foundation in supporting environments primarily consisting of Windows devices and the Microsoft 365 suite.

Manage IT assets and responsible for troubleshooting/repair, providing technical support, and ensuring seamless end-user IT operations.

Effectively support the organization's IT needs, contribute to a positive user experience, and grow within the role.

ROLES AND RESPONSIBILITIES

• Provide Technical Support: Ensure timely and effective resolution of technical issues related to windows devices and Microsoft 365 applications, minimizing downtime and maintaining productivity.
• Enhance User Experience: Deliver high-quality customer service and support to end-users, ensuring their IT needs are met and they are satisfied with the solutions provided.
• Maintain IT Infrastructure: Assist in the maintenance and optimization of the IT infrastructure, including performing routine updates, backups, and system monitoring to ensure smooth operations.
• Support IT Projects: Contribute to various IT projects and initiatives, providing support and collaborating with the IT team to achieve project goals and improve IT services.
• Develop Technical Skills: Continuously learn and develop technical skills to stay updated with the latest technologies and best practices, enhancing the overall capability of the IT support team.
• Documentation and Reporting: Create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps, ensuring knowledge is shared and easily accessible within the team.
• User Training and Education: Conduct training sessions and create user guides to help end-users effectively utilize Windows devices and Microsoft 365 applications, promoting best practices and reducing common issues.
• On Rotating Roster: Provide standby support during off-office hours and weekend on a rotational basis.
• Ad-Hoc Assignments: carry out any other tasks assigned by the Supervisor or Reporting Officer.

EXPERIENCE

• Technical Support: Provided first-level support to users, resolving issues related to Windows devices and Microsoft 365 applications. Assisted in setting up new workstations and configuring user accounts.
• Incident Management: Logged and tracked support tickets using IT service management tools. Ensured timely resolution of incidents and escalated complex issues to senior engineers when necessary.
• System Maintenance: Performed routine maintenance tasks such as software updates, system backups, and virus scans. Monitored system performance and implemented necessary optimizations.
• User Training: Conducted training sessions for end-users on best practices for using Windows devices and Microsoft 365 applications. Created user guides and FAQs to assist with common issues.
• Collaboration: Worked closely with the IT team to support various projects and initiatives. Participated in team meetings and contributed to the continuous improvement of IT services.

SKILLS

• Technical Support: Proficient in diagnosing and resolving hardware and software issues on Windows devices. Experienced in providing remote and on-site support to end-users.
• Microsoft 365: Skilled in managing and troubleshooting Microsoft 365 applications, including Outlook, Teams, OneDrive, and SharePoint. Familiar with user account management and license allocation.
• Windows OS: Strong understanding of Windows operating systems (Windows 10/11), including installation, configuration, and maintenance. Knowledgeable in Active Directory for user and group management.
• Networking: Basic knowledge of networking concepts such as TCP/IP, DNS, DHCP, and VPN. Capable of troubleshooting connectivity issues.
• Customer Service: Excellent communication and interpersonal skills, with a focus on delivering high-quality support and ensuring user satisfaction.
• Documentation: Ability to create and maintain detailed documentation of IT processes, procedures, and troubleshooting steps.

QUALIFICATIONS

• Diploma or Bachelor's Degree in IT with minimally 3-5 years of relevant experience.
• With relevant certifications such as CompTIA A+, Microsoft Certified: Modern Desktop Administrator Associate, Azure Fundamentals, CCNA, or equivalent will be an advantage.

Responsibilities:

• Design, develop, and test electronic circuits for embedded systems.
• Develop and debug embedded software using C/C++ or other relevant programming languages.
• Implement software solutions and design interfaces to support robot integrations
• Perform circuit simulations and PCB layout design.
• Optimize power consumption, performance, and reliability of embedded systems.
• Collaborate with cross-functional teams to define system requirements and specifications.
• Conduct design reviews, testing, and validation of hardware and software.
• Provide technical support and troubleshooting for product development and production teams.
• Assist robot field testing, evaluate the performance of our systems, and create performance reports.
• Contribute to overall architecture design and documentation.

Requirements:

Technical qualifications:

• Background in Computer Science/Electrical Engineering/Mechanical Engineering with focus in robotics, mechatronics, or related fields
• Proficient in ROS or C++ or Python and embedded programming
• Strong knowledge of robotic platforms, robotics hardware (sensors, actuators), and networks (Ethernet, Ethercat, CAN, Modbus, RS232, etc)
• Experience in circuit design, PCB layout, and debugging using tools like oscilloscopes, logic analyzers, and multimeters.
• Familiar with Linux platform, its configuration, and command line operations

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

- Diploma/Bachelor's degree in Mechanical Engineering

- Mininum 2 - 5 years' experience working in construction industry

- Have experience with HDB projects