As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Senior Electrical Design and Commissioning Engineer (Marine Vessel Solution)

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday - Friday: 8.30am to 6.00pm
• S$ 4,000 - 6,000

Key Responsibilities

• Electrical Design: Collaborate on system requirements, develop schematics, select components, and design control logic for marine vessel propulsion/control systems.
• Commissioning and Integration: Oversee installation, testing, and validation of electrical systems.
• System Optimization: Analyze performance, identify optimization opportunities, and implement innovative solutions.
• Documentation and Reporting: Create technical documentation and commissioning reports.
• Regulatory Compliance and Safety: Ensure compliance with maritime regulations, industry standards, and safety guidelines.

Requirements

• Diploma/Bachelor's in Electrical Engineering or related field
• Relevant experience in electrical design/commissioning (marine propulsion/control systems preferred)
• Proficiency in electrical design software (AutoCAD Electrical, EPLAN) and simulation tools
• Knowledge of marine electrical systems, industry standards (ABS, DNV, IMO), and regulations
• Requires to travel overseas for commissioning activities (shipyards/vessels)

WhatsApp or Email your Resumé now for Interview Arrangements !

Whatsapp: +65 80231200

✉ [email protected]

Daniel Wong Reg No: R2095781

The Supreme HR Advisory Pte Ltd EA No: 14C7279

about the company

My client is a leading manufacturer of digital electronic products. With an outstanding international reputation in its field and a great emphasis on training & development, it is certainly a great brand to explore if you are seeking for greater achievement in your career

about the job

• Design and realization of the chip floorplan, clock architecture and powerplan
• In charge of physical design tasks from netlist to GDSII (P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout)
• Lead analog designs during product development
• Physical design methodology of advanced process nodes and builds an automatic physical design platform

skills & experience required

• PhD / Master / Degree in Electrical & Electronics / Integrated Circuit / Microelectronics Engineering
• Min 2 years of hands on with digital backend ICs circuit design / physical design
• Well versed with synthesis, place & route, STA and design convergence
• Willing to work in a new start up entity in Singapore
• Proficient in tapeout experience at advanced technology will be a plus
• TCL,Perl,Python script development and familiar with EDA tool design
• Training given to candidate with no experience
• 2 rounds of interview (both round will be technical which is related to Physical Design)

If you are interested in the position

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

What you do

Be part of the team that validates the physical sign-off of our chips, powering the brands we love every year with 2 billion consumer electronic products such as digital TVs, home audio devices, DVD/Blue-ray players, smartphones, tablets, networking and connectivity products, and many more. As a member of the MediaTek Physical Verification Sign-off team, you will be responsible for ensuring the manufacturability and reliability of IC designs through rigorous physical verification processes to enable the success of our chips tape-out. Join us in shaping the future of technology and making a real impact on the world!

• Responsible for assembling of various design system into a full chip.
• Perform design rule checking (DRC) to identify and resolve System-on-chip layout violations and ensure compliance with manufacturing rules and constraints.
• Conduct layout versus schematic (LVS) verification to ensure the accuracy and consistency between full chip layout and schematic of the IC design.
• Execute electrical rule check (ERC) to identify potential electrical issues and ensure the integrity of the design.
• Perform antenna and electrostatic discharge (ESD) checks to prevent potential reliability, latch-up, leakage issues.
• Collaborate with design and layout teams to address and resolve physical design issues and optimize the layout for manufacturability and reliability.
• Contribute to the development and improvement of physical verification methodologies and flows.
• Work closely with process technology teams to understand and address process-related challenges and constraints.
• Participate in tape-out activities and ensure that the physical design meets the required quality and reliability standards for fabrication.

What you bring

• With minimum 8 years of relevant experience.tronic Engineering / Computer Science or equivalent..
• With minimum 8 years of relevant experience
• Solid understanding of physical design concepts, IC manufacturing processes, and semiconductor device physics.
• Proficiency in using physical verification tools such as Calibre, IC Validator, or other industry-standard DRC/LVS tools.
• Experience with scripting languages such as TCL, Perl, or Python for automation and tool customization.
• Strong problem-solving skills and the ability to analyze and debug complex physical design issues.
• Excellent communication and teamwork skills to collaborate effectively with cross-functional teams.
• Familiarity with EDA (Electronic Design Automation) tools and design methodologies is a plus.
• Proficient in UNIX (Linux) platforms.
• Strong communication skills, problem solving and analytical skills.

Location: One North, Singapore

Who We Are

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact. – Join us now!

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Penjuru (Transport Pickup Provided at: Jurong East, Choa Chu Kang, Bishan & Serangoon)
• Monday to Friday 8.30am to 6pm.
• Salary range: S$ 3,500 - 4,200

Job Responsibilities:

• Design control systems
• Preparation of drawings for customer approval
• Preparation of drawings/ BCM for shop floor production
• Co-ordinating with clients, consultants and internal department.
• Drafting work with use of CAD system (AUTOCAD/SOLIDWORKS).
• Any other ad-hoc duties as assigned.

Requirements:

• Diploma or Bachelor’s Degree in Electrical Engineering.
• Hands on experience with vessel mechanical and engine systems.
• Experience with engineering design software.
• Familiarity with maritime HM&E systems and naval construction processes.

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Responsibilities:

• Lead RTL design, simulation, and verification for TetraMem ASIC/SoC products, ensuring robustness.
• Integrate and validate IP blocks for seamless system functionality.
• Analyze requirements for Power, Performance, and Area (PPA), optimizing design trade-offs.
• Collaborate with backend team in RTL coding, implementation, and synthesis for successful tapeout.
• Create and maintain reusable IPs for AI/in-memory computing.
• Support Post-Si testing to ensure product functionality and quality.
• Mentor junior engineers to facilitate their professional growth.
• Contribute to design reviews for improved product performance and reliability.
• Stay current on RTL design methodologies for efficiency and quality.
• Collaborate with cross-functional teams for successful product development.

Requirements:

• Minimum Master in Electrical Engineering with 5 years of working experience with emphasis on RTL/SoC/digital design.
• Proficient in Verilog and SystemVerilog.
• Proficient in VCS, Verdi, or similar industry-standard tools.
• Skilled in pre-layout and post-layout simulation.
• Knowledgeable about the design flow and collaboration with backend teams.
• Familiar with AMBA APB and AXI protocols.
• Familiar with RISC/Arm or other core architectures.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description:

We're seeking an articulate and passionate Interior Design Consultant to join our dynamic team.

• Showcase a strong understanding of interior design to meet business objectives.
• Communicate with customers to gather and understand their requirements.
• Present space planning and design concepts to customers.
• Manage and align customer expectations effectively.
• Work closely with internal team members and external specialists.
• Provide regular updates on residential/commercial project progress to the Director.

Job Requirements:

• A minimum of a Diploma in Interior Design or a related field is required.
• Candidates with at least 1 year of experience are preferred, but entry-level candidates are also encouraged to apply.
• Basic knowledge of project coordination and management is advantageous.
• Proficiency in software such as AutoCAD, Photoshop, and MS PowerPoint is essential.
• Confidence in pitching sales is a must.
• Strong communication skills and attention to detail are highly valued.
• Must be sales-driven, motivated, and self-empowered.
• Willingness to work in a fast-paced and challenging environment is essential.

As part of a high-performing Implementation and Solutions team, you will take a lead role in driving forward new Enterprise RPO & Project Solutions globally.

Working closely with cross-functional teams, you will design and implement bespoke outsourced recruitment solutions aligned to the client’s requirements, whilst supporting with the client onboarding process and transition to our award-winning operations team. You will be responsible for establishing and evolving exceptional relationships with existing and prospective clients, through the provision of a highly consultative and client centric approach throughout the design and implementation process.

What you will be doing:

• Designing tailored solutions for new deals and renewals based on client needs
• Manage pricing for new opportunities and work closely with Business Development leaders to create compelling commercial offerings
• Manage and coordinate the end to end delivery of implementation RPO and Recruitment projects, including scoping, planning, executing and closure
• Lead cross functional teams and collaborate with stakeholders ensuring successful project delivery
• Identify and implement process improvements to drive efficiency and success
• Attend and actively participate in client briefings pitches, locally, regionally and globally
• Utilise project management tools and techniques and drive innovation through technology enabled solutions
• Enable continuous improvement for existing clients and projects

Who you are:

• With a track record of delivery within the RPO/ recruitment space, you will be adept at engaging with business leaders and developing strong partnerships with clients and stakeholders.
• An experienced RPO leader with exceptional communication and outstanding problem solving skills and a demonstrated ability to come up with creative solutions to new problems
• Highly commercial with proven project management expertise, stakeholder management and operational management success across a portfolio of clients and industry sectors
• You are energetic, committed and results oriented
• You can think on your feet with an attitude and approach to thinking about things differently, seeking out better ways, embracing critical questioning, innovation and continuous improvement.

Why you’ll love working for Hudson RPO:

• Work with some of the world’s leading and most recognised brands
• Receive four ‘Thrive’ days of leave per year to support your health and wellbeing (on top of your annual leave!)
• Flexibility is at the core of who we are, and flexible work arrangements are encouraged
• Quarterly and annual recognition programs to celebrate our employee’s success
• We’re a passionate team of people who are shaping the future of talent!

A little bit about us

At Hudson RPO, we’re shaping the future of talent.

From recruitment process outsourcing (RPO) to employer branding and across the complete talent life-cycle, we thrive in delivering world-class customer and candidate experiences. People are at the centre of everything we do.

We deliver innovative, customised recruitment services and talent solutions to organisations worldwide. We’re an innovative and diverse team who work hard and think smart. Led by accomplished and inclusive leaders, our people are always open to trying new things to continuously bring excellence into our client solutions.

At Hudson RPO we don’t just accept difference – we celebrate it, support it, and thrive on it for the benefit of our employees, our clients, and our community. We are proud to be an equal opportunity.

Duties and Responsibilities (including but not limited to):

• The Facility Design Lead shall be able to provide technical advice on waste management facilities, waste treatment technologies, waste treatment capacity
• Ensure that consistent quality standards and conformance with design plans and specifications are maintained on all contracts and in all engineering disciplines from the start to the end of the Project
• Oversee the entire design process, from concept to implementation, ensuring project is delivered on time, within specifications and meeting industrial standards
• Lead and mentor a team of engineers and ensuring the quality in design work
• Manage design budgets, including cost estimation, resource allocation, and cost control
• Any other matters that may from time to time be delegated by the PD/PM

Requirements

The individual shall be:-

• a Professional Engineer/Chartered Engineer registered in his/her country of practice is preferred
• The Facility Design Leads shall have relevant engineering degree and professional certificates
• shall have at least 15 years of relevant engineering experience in the design and construction
• shall possess relevant experience in the planning and design of large scale waste management and water treatment facilities (e.g. WTE, sludge incineration, materials recovery and food waste treatment, electrical substation, etc.). The OE shall ensure that each of the key facilities within the project is led by a design lead with the relevant qualifications and area of specialisation

About Us

The Lindner Group is Europe’s leading manufacturer and contractor for the building envelope, interior fit-out and insulation. With a workforce over 8000, Lindner operates numerous production facilities and subsidiary companies in more than 20 countries from our main office in Arnstorf, Germany.

Lindner Facades Asia Pte Ltd (LFA) was successfully re-launched in May 2019, as part of the Lindner Steel & Glass operation. Located in Singapore, LFA will be used as a base to promote and secure projects for LFA and Lindner Group in the vast and promising Asian market.

Our projects will cover the Asian markets, which include India, Philippines, Indonesia, Malaysia, Myanmar, Thailand and Vietnam. Enquires have also been received from Cambodia, Bangladesh and Sri Lanka.

LFA offers pre-sales consultation and planning advice, design and engineering, project management and planning, fabrication and installation. Employing a team of highly skilled, well-trained and extensive experience when it comes to LFA’S unique selling point in delivering turnkey projects with complex steel and glass, facades, skylights, curtain wall and building envelopes.

Duties and Responsibility

· Create, develop & update BIM model either from scratch or existing supplied 2D CAD or PDF drawings.

· Ensure model quality and identify any conflict between disciplines.

· Generate & update Revit-based plans, sections, elevations and details that can be used as design analysis, tender drawing, drawing for Authority submission, shop drawing, fabrication drawing and as built drawing.

· Generate 3D centre-line model for structural Engineer to perform analysis.

· Maintenance & implementation of company’s BIM standards, Facade template, contents and library

· Any other ad hoc duties as assigned by Supervisor

Knowledge, Skill and Abilities

· Must have at least basic knowledge in Facade design. Experience in BIM submission to authority is must.

· Proficient in Revit. Knowledge in other BIM software is added advantage.

· Must have a good time management.

· Must be able to work with minimum supervision

· Must be knowledgeable, keen and observant in worksets and worksharing function of BIM.

· Must be a team player and with good working attitude

Job Overview:

We are looking for a motivated Market Research Intern to assist in gathering and analysing data related to the interior design industry.

This role offers an excellent opportunity to gain hands-on experience in market research.

Key Responsibilities:

• Conduct market research on industry trends and customer

preferences.

• Assist in creating surveys and questionnaires.

• Analyse data and prepare reports.

• Stay updated on interior design trends in Singapore.

Qualifications:

• Currently pursuing or recently graduated with a degree in Marketing,

Business, or Interior Design.

• Strong analytical skills and attention to detail.

• Excellent written and verbal communication skills.

• Proficient in Microsoft Office.

Industry: Automation

Conducive working environment

Exciting career opportunity

Responsibilities:

• Analyze project requirements and develop innovative solutions to meet customer needs.
• Design high precision and high-tech automation equipment, ensuring that it meets performance, quality, and reliability standards.
• Select components such as servo axes and robots based on project requirements.
• Coordinate with fabrication houses and component suppliers to ensure timely delivery of parts and components.
• Guide assembly technicians in building and testing the equipment, ensuring that it meets design specifications and performance requirements.
• Conduct design reviews and provide feedback to ensure continuous improvement of our products.
• Stay up to date with the latest developments in mechanical engineering and automation technology

Requirements:

• Bachelor’s degree / Diploma in Mechanical Engineering / Mechatronics or related field preferred.
• Minimum 6 years of relevant experience in automation equipment design.
• Knowledge and experience in factory automation is an advantage.
• Ability to work independently and as part of a team.
• Experience in electrical, pneumatic, and sensor component selections.
• Proficient in SolidWorks 3D software.
• Strong understanding of mechanical engineering principles, materials, and manufacturing processes

Job ID: L3V55568

All Successful candidates can expect a very competitive remuneration package and a comprehensive range of benefits.

Kindly email your resume in a detailed Word format to [email protected]

We regret that only shortlisted candidates will be notified

People Profilers Pte Ltd

20 Cecil Street #08-09 PLUS Building Singapore 049705

+65 6950 9747

EA Licence Number: 02C4944

Registration Number: R1100011

EA Personnel: Carlo Antonio Dela Cruz

Job Title: Site Support Coordinator

Location: Singapore
Job Type: Full-Time
Reporting to: Interior Design Manager

Job Overview

We are seeking a reliable and detail-oriented Site Support Coordinator to assist with site monitoring, customer interactions, and contractor communication.

The primary focus of this role is to follow instructions precisely from the Interior Design Manager and ensure tasks are executed as directed. This position involves taking photos and measurements on-site, documenting progress, and coordinating with Mandarin-speaking contractors. The work is a combination of on-site and remote tasks.

Key Responsibilities

• Follow Instructions:Take detailed and clear instructions from the Interior Design Manager and execute tasks as directed.
  
• Site Documentation:Capture clear and organized photos and videos of the site to document progress and current conditions.
  Ensure all visuals are labeled and shared promptly with the project team.
  
• Measurements:Accurately measure the site as instructed and report findings to the manager.
  
• Customer Feedback & Defects:Collect feedback from owners and share it with the project team.
  Walk through the site with owners to identify defects and document them for follow-up.
  
• Contractor Coordination:Communicate instructions to Mandarin-speaking contractors as required.
  Relay updates from contractors to the Interior Design Manager for timely action.
  
• Reporting:Submit daily updates, including photos, measurements, and any feedback collected.
  Maintain simple logs of completed tasks and observations.
  

Why Join Us?

• Gain experience in site operations and project coordination with clear, straightforward responsibilities.
• Work in a flexible role that combines on-site and remote tasks.
• Be part of a supportive team focused on delivering high-quality interior design projects.

Qualifications

• Language Skills: Fluent in English and Mandarin to communicate effectively with mandarin speaking contractors and team members.
• Experience: No prior experience required; training will be provided.
• Skills:Strong ability to follow instructions accurately and execute tasks precisely.
  Basic photography and measurement skills.
  Comfortable navigating construction sites and interacting professionally with contractors and clients.
  
• Other Requirements:Physically capable of conducting on-site inspections.
  Reliable, punctual, and detail-oriented.
  

Application

If you excel at following instructions and are eager to support site operations with diligence and attention to detail, we encourage you to apply.

Submit your resume and a brief statement about your interest in this role.

Join us as a Site Support Coordinator and play a vital role in ensuring project success through precise execution of tasks and clear communication.

Solution Design and Implementation Lead

As part of a high-performing Implementation and Solutions team, you will take a lead role in driving forward new Enterprise RPO & Project Solutions globally.

Working closely with cross-functional teams, you will design and implement bespoke outsourced recruitment solutions aligned to the client’s requirements, whilst supporting with the client onboarding process and transition to our award-winning operations team. You will be responsible for establishing and evolving exceptional relationships with existing and prospective clients, through the provision of a highly consultative and client centric approach throughout the design and implementation process.

What you will be doing:

- Designing tailored solutions for new deals and renewals based on client needs

- Manage pricing for new opportunities and work closely with Business Development leaders to create compelling commercial offerings

- Manage and coordinate the end to end delivery of implementation RPO and Recruitment projects, including scoping, planning, executing and closure

- Lead cross functional teams and collaborate with stakeholders ensuring successful project delivery

- Identify and implement process improvements to drive efficiency and success

- Attend and actively participate in client briefings pitches, locally, regionally and globally

- Utilise project management tools and techniques and drive innovation through technology enabled solutions

- Enable continuous improvement for existing clients and projects

Who you are:

- With a track record of delivery within the RPO/ recruitment space, you will be adept at engaging with business leaders and developing strong partnerships with clients and stakeholders.

- An experienced RPO leader with exceptional communication and outstanding problem solving skills and a demonstrated ability to come up with creative solutions to new problems

- Highly commercial with proven project management expertise, stakeholder management and operational management success across a portfolio of clients and industry sectors

- You are energetic, committed and results oriented

- You can think on your feet with an attitude and approach to thinking about things differently, seeking out better ways, embracing critical questioning, innovation and continuous improvement.

Why you’ll love working for Hudson RPO:

· Work with some of the world’s leading and most recognised brands

· Receive four ‘Thrive’ days of leave per year to support your health and wellbeing (on top of your annual leave!)

· Flexibility is at the core of who we are, and flexible work arrangements are encouraged

· Quarterly and annual recognition programs to celebrate our employee’s success

· We’re a passionate team of people who are shaping the future of talent!

A little bit about us

At Hudson RPO, we’re shaping the future of talent.

From recruitment process outsourcing (RPO) to employer branding and across the complete talent life-cycle, we thrive in delivering world-class customer and candidate experiences. People are at the centre of everything we do.

We deliver innovative, customised recruitment services and talent solutions to organisations worldwide. We’re an innovative and diverse team who work hard and think smart. Led by accomplished and inclusive leaders, our people are always open to trying new things to continuously bring excellence into our client solutions.

At Hudson RPO we don’t just accept difference – we celebrate it, support it, and thrive on it for the benefit of our employees, our clients, and our community. We are proud to be an equal opportunity

Position title : Goldsmith

Location: Farrer Park

Working Days: 6 days a week (Must be able to work on weekends)

Working hours : 11am to 9pm

Salary : $3,500

Key Responsibilities:

1. Designing Jewelry and Objects:Create custom designs for jewelry (rings, necklaces, bracelets, etc.) based on customer requests or original ideas.
   Sketch or use computer-aided design (CAD) software to create detailed blueprints of the final product.
   
2. Metalworking:Melt and alloy gold and other metals to achieve the desired color, strength, and consistency for specific pieces.
   Shape and mold the metal using various techniques such as casting, forging, and soldering.
   
3. Casting and Shaping:Pour molten gold into molds to create base shapes for jewelry, and refine or finish pieces through techniques like hammering, rolling, or polishing.
   Use tools such as files, pliers, and hammers to shape metal and add intricate details to the designs.
   
4. Stone Setting:Set precious or semi-precious stones (diamonds, sapphires, etc.) into the metal using various setting techniques such as prong, bezel, or pave settings.
   
5. Finishing and Polishing:Smooth rough edges and surfaces to achieve a high-quality finish.
   Polish pieces using specialized tools to enhance shine and detail.
   
6. Repairing and Restoring Jewelry:Repair damaged jewelry by re-soldering, re-setting stones, or replacing broken parts.
   Restore old or antique pieces to their original form, while maintaining or enhancing their integrity.
   
7. Quality Control:Inspect finished pieces to ensure they meet design specifications, quality standards, and durability.
   Ensure that the weight, size, and quality of metals and gemstones are as required by the customer or company.
   
8. Customer Interaction:Consult with clients to understand their preferences, budget, and desired outcomes.
   Make adjustments to designs based on feedback or specific requests.