SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You are responsible for identifying, assessing and advising on risks arising from the workplace health, environmental and/or work processes, recommending measures to eliminate or minimize and control the risks and implementing the measures.

Key Responsibilities

• Conduct job and environment hazard and risk assessments, perform workplace evaluations, and implement corrective and preventive actions
• Apply relevant licenses, conduct tests and provide necessary inspection reports on environment and safety to drive improvement
• Lead and continually review existing and new Fab processes and equipment for EHS compliance, including managing waste, air, water, chemicals, gas and others
• Manage semiconductor process safety, establish Environment, Health and Safety (EHS) culture, implement and enhance the EHS program for employees and contractors
• Perform regular and ad-hoc inspections. audits and supervise hazardous operations safely
• Lead and facilitate ERC (Emergency Response Committee) related activities such as factory emergency response, fire, gas leak and others
• Collaborate with relevant departments for ISO14001, ISO45001, ISO14064, and ISO50001 management systems certification and compliance
• Provide technical, regulatory and process guidance to address emerging EHS issues

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Engineering or Science background including Occupational Safety, Chemical Engineering or Chemistry, environmental science and emergency response or management
• Minimum of 3 years of experience in semiconductor, electronics manufacturing, or other chemically intensive manufacturing industries and regulatory compliance preferred.
• Possess industrial safety, environmental protection, and fire protection related certificates
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months

Key Skills and Attributes

• Strong analytical skills and able to work under pressure in a fast-paced environment
• Good interpersonal, leadership and communication skills to work effectively across functions and geographical teams with diverse background
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 4 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

COMPANY DESCRIPTION

Headquartered in Singapore, The EtonHouse International Education Group has 120 schools across 11 countries. We run pre-schools as well as K-12 international schools. Together, these schools provide internationally recognized programmes and high-quality education to over 20,000 students globally. The group also runs enrichment programmes and cutting-edge ed-tech programmes to scale the provision of high-quality education in pre-schools.

Over the last 27 years, EtonHouse has been at the forefront of international education in the Asia Pacific region and has won numerous awards. In 2019, our founder, Mrs. Ng Gim Choo won the EY Entrepreneur Of The Year Award in the Education category. In addition, EtonHouse was recently selected to be in the inaugural cohort of the Scale-Up SG programme, which is an Enterprise Singapore programme selecting high-growth potential local companies which can be groomed into future global champions.

With children at the heart of what we do and the vision to make good quality education accessible to every child in Singapore, EtonHouse launched the EtonHouse Community Fund (ECF) in 2015. As an independent IPC charity, ECF continuously runs initiatives to make a difference in the lives of vulnerable children.

EtonHouse Vision

Shaping the future through education

EtonHouse Mission

Developing confident and capable global citizens

Be a part of the EtonHouse family

We welcome passionate and dedicated professionals who share our belief in the power of education. Together, we can make a meaningful difference to children and society through education.

RESPONSIBILITIES

This is an exciting opportunity for an experienced Design & Technology teacher to join a growing, boutique school in the heart of Singapore. The successful applicant will be expected to teach Design & Technology from ages 9-16, Upper Primary to IGCSE. The school offers IGCSE Design & Technology so experience in this area would be an advantage. They will have outstanding subject knowledge and have the ability to enthuse and inspire students, maximising achievement and progress at all levels. A teacher with flexibility, resilience, and a caring and kind approach towards students. A learner with a drive to develop creative new approaches to student learning within a collaborative environment.

KEY RESPONSIBILITIES

• Deliver the Design & Technology curriculum to assigned classes in accordance with the school's timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies which develop the competence and confidence of every student.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Assess and develop the Design & Technology curriculum in the school
• Plan and deliver schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject, and of different students.
• Keep abreast of current developments in Design & Technology education and to adapt the curriculum content and methods of teaching and examining as appropriate.
• Identifying appropriate resources within the limits of the school budget.
• Ensure health and safety policies are followed within the Design & Technology workshop.
• Ensure that the Design & Technology workshop presents a stimulating environment, which help to influence students' attitudes positively towards the subject.
• Ensure students' work is regularly assessed and that homework is in line with school policy.
• Report to parents in accordance with the school's reporting policy.
• Use information gained from assessment, recording and reporting procedures to generate further improvement in student achievement.
• When required, take on a form tutor role in the Senior School and fulfill the responsibilities of that position.
• Follow the School's policies and procedures with regard to discipline and behaviour, daily routines, duties, homework, leave of absence and visits.
• Contribute to co-curricular activities that broaden students' experiences and contribute to the general life of the school.
• Promote the study of Design & Technology amongst students and parents.
• Attend and contribute to meetings of a professional nature.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Inclusive Education Team with regard to individual students, to ensure that those needs are understood, planned for and met.
• Develop effective links with the wider community, in order to extend the study of Design & Technology and enhance teaching and learning.

• At least 2 5 years relevant professional teaching experience in education;
• The candidate should hold a minimum of a Bachelor Degree in Design and Techonlogy or Education or equivalent, which is obtained from a recognised University or College involving not less than 3 years full time study;
• Teachers Certificates, Diplomas or other Teacher Accreditation courses and certification are required if the applicant's degree is not in Education;
• IB PYP course and training are highly valued;
• Knowledge of or willingness to acquire knowledge of inquiry based learning is required;
• Applicants must provide original copies of their Certificates and academic transcripts for authentication;
• International experience, especially in Asia is highly regarded.

• Taking the conceptual design through to implementation and handover;
• Ensure that all design is in compliance with local authorities’ code.
• Ensuring sustainability targets are incorporated into the design;
• Production of tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates;
• Progressing the design in accordance with the Design Checklist;
• Chairing sub-contractor progress meetings;
• Chairing Architectural Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance engineers to ensure alignment of supervision goals with specification requirements;
• In the absence of a Lead Architect, the Senior Architect shall assume the role and responsibilities assigned to the Lead Architect position;
• Mentoring of an Architect with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring Architectural System Supervisor is provided with the current approved plans and shop drawings;
• Ensuring Architectural System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation.

Other Duties

• To promote safe working practices and to protect the health and wellbeing of Employees, Sub-contractors and customers;
• To undertake the assigned work scope in a professional and responsible manner;
• To protect the interests of the company;
• The role could vary between pricing, design, construction, commissioning, through to final acceptance;
• Ad hoc duties as determined by management.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

This is an exciting opportunity for an experienced Design & Technology teacher to join a growing, boutique school in the heart of Singapore. The successful applicant will be expected to teach Design & Technology from ages 9-16, Upper Primary to IGCSE. The school offers IGCSE Design & Technology so experience in this area would be an advantage. They will have outstanding subject knowledge and have the ability to enthuse and inspire students, maximising achievement and progress at all levels. A teacher with flexibility, resilience, and a caring and kind approach towards students. A learner with a drive to develop creative new approaches to student learning within a collaborative environment.

KEY RESPONSIBILITIES

• Deliver the Design & Technology curriculum to assigned classes in accordance with the school’s timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies which develop the competence and confidence of every student.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Assess and develop the Design & Technology curriculum in the school
• Plan and deliver schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject, and of different students.
• Keep abreast of current developments in Design & Technology education and to adapt the curriculum content and methods of teaching and examining as appropriate.
• Identifying appropriate resources within the limits of the school budget.
• Ensure health and safety policies are followed within the Design & Technology workshop.
• Ensure that the Design & Technology workshop presents a stimulating environment, which help to influence students’ attitudes positively towards the subject.
• Ensure students’ work is regularly assessed and that homework is in line with school policy.
• Report to parents in accordance with the school’s reporting policy.
• Use information gained from assessment, recording and reporting procedures to generate further improvement in student achievement.
• When required, take on a form tutor role in the Senior School and fulfill the responsibilities of that position.
• Follow the School’s policies and procedures with regard to discipline and behaviour, daily routines, duties, homework, leave of absence and visits.
• Contribute to co-curricular activities that broaden students’ experiences and contribute to the general life of the school.
• Promote the study of Design & Technology amongst students and parents.
• Attend and contribute to meetings of a professional nature.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Inclusive Education Team with regard to individual students, to ensure that those needs are understood, planned for and met.
• Develop effective links with the wider community, in order to extend the study of Design & Technology and enhance teaching and learning.

QUALIFICATIONS

• At least 2 – 5 years relevant professional teaching experience in education;
• The candidate should hold a minimum of a Bachelor Degree in Design and Techonlogy or Education or equivalent, which is obtained from a recognised University or College involving not less than 3 years full time study;
• Teachers Certificates, Diplomas or other Teacher Accreditation courses and certification are required if the applicant’s degree is not in Education;
• IB PYP course and training are highly valued;
• Knowledge of or willingness to acquire knowledge of inquiry based learning is required;
• Applicants must provide original copies of their Certificates and academic transcripts for authentication;
• International experience, especially in Asia is highly regarded.

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Halo Microelectronics, a developer of Analog and Mixed Signal Integrated Circuits enabling energy-efficient smart systems is looking for experiences Analog Circuit Design Engineers to join the Singapore Design Team.

Responsibilities:

* Transistor level design of Analog circuits, simulation, evaluation and characterization, system verification.

* Circuits design includes reference, amplifiers, drivers, LDOs, switching regulators or other mixed signal circuits.

* Coordinate with Layout Engineer in layout/mask design.

* Coordinate with application and product engineer, testing engineer to bring the products to production successfully.

* Work with application engineer and FAE to solve customers technical issues.

Qualifications:

* Strong educational or industrial background in Analog Circuit Design.

* Experience with bipolar and CMOS IC design.

* Personal character and team building skills essential to enabling on-time delivery of devices.

* Ability to work independently

* Must demostrate good communication and interpersonal skills.

* Must be able to perform as a team member.

Job Description:

• To engage and establish good business relationships with existing and potential clients
• Respond effectively and promptly to all sales enquiries to ensure conversion into sales
• Coordinate sales effort with team members and other internal departments to ensure that sales orders are fulfilled
• Keep abreast of best practices and promotional trends
• Continuously improve through feedback
• To perform any other duties assigned by superior
• Provide good customer service and assistance to showroom walk-in clients

Requirements:

• Minimum 1 year working experience in the Bathroom, Building Material or Interior Design Industry
• Good communication and interpersonal skills
• Good team player and self-motivated individuals with a positive mindset
• Well groomed, friendly and engaging personality

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Project Coordinator

Salary: $3,200 - $4,000

Working Hours: Monday - Sunday, 6 days shift work 10.30am-7pm; If work night shift next day will come late hours

Working Location: Site (Islandwide)

Office Location: Ang Mo Kio Industrial Park

Job Scope:

• Able to manage projects independently
• Oversee project operations and liaise with clients, subcontractors and suppliers on project matters
• Ensure that project works are completed with respect to the scheduled dates
• Cost and quality control of projects
• Ensure that construction teams and sub-contractors adopt all necessary measures and comply with safety, environmental and other relevant legislation and requirements in the contract

Requirements:

• Minimum 2 year of relevant experience
• Familiar with building plans submission procedures and approvals
• With valid class 3 license will be an advantage

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

• Position : Procurement Executive (Interior Design / Fit out / Purchase Order/Project Costing)
• Location : Toa Payoh Industrial (Bus stop nearby)
• Working hours : 5 days a week - Monday to Friday from 9am to 6pm
• Salary (commensurate with experience) : Basic up to $3500 + Performance Bonus + 14 Days Annual leave
• Duration : Permanent
• Industry : Interior Fit-out Industry

Main Responsibilities:

• Implement procurement strategies, policies, and procedures.
• Identify and manage vendors, including contract development and compliance, and vendor performance
• Negotiate with suppliers on lead-time, cost and quality to obtain the maximum benefit for the company.
• Issue of Purchase Order, updating of Purchase Orders status and Project Cost updating.
• Exercises a good working knowledge of materials and sources of supply and makes purchases at prices consistent with quality and quantity requirements
• Other Ad hoc assignment by Superior.

Requirements:

• Knowledge of import and export regulations.
• Experience in vendor management and contract negotiation.
• Ability to work in a fast-paced environment and manage multiple projects simultaneously.
• Self-motivated and able to work independently with minimum supervision

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

Architectural Coordinator (Facade/interior design, A1 main con building)

Our client is an established A1 main contractor specializing in building construction and civil engineering projects. Their portfolio spans residential, commercial, mixed-use developments, and infrastructure projects, including MRT works. They’re now looking for Architectural Coordinators to join them for their building projects during an exciting time in their development.

Job Responsibilities

• Oversee the architectural aspects of a project from design development to construction completion.
• Work with the project team to develop and maintain timelines for project completion.
• Conduct and participate in site visits to monitor construction progress, address design-related issues, and ensure that the project is built according to plans and specifications.
• Provide technical guidance and supervision to junior architects and CAD technicians
• Identify and resolve design conflicts or discrepancies in construction drawings and work closely with the construction team
• Ensure compliance with all applicable building codes and regulations.

Requirements

• Degree/diploma in Architecture or equivalent
• Minimum 2 years of experience in architectural design and coordination.
• Candidates who possess façade/interior design experience will be highly desirable

Location: West

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

☑ Basic $4000 - $6000

☑ Permanent role + High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm )

☑ Tampines

☑ Class 1 MNC Builder

Responsibilities

• Prepare and modify precast concrete drawings (schematic, detailed, and production) to meet local standards.
• Design 2D/3D drawings, perform basic calculations, and resolve technical issues.
• Collaborate with clients, consultants, subcontractors, and participate in design meetings.
• Support junior team members and assist with tasks as needed.

Requirements:

• Diploma or Degree in Civil Engineering
• Min 1 -3 years of related experience with Precast Concrete Shop Drawing

Interested applicants are welcome to apply online with updated Resume/CV via Apply Now button or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

Location: East-central

Industry: Interior Design – Office & Commercial Building

Our client is a leading corporate interior design firm specializing in creating dynamic, innovative, and functional workspaces. Our designs reflect the culture and brand of our clients, fostering environments that inspire collaboration, creativity, and productivity.

About the Role

We are seeking a highly motivated and experienced Senior Contract Manager/QS to join the team. In this critical role, you will lead all commercial aspects of the projects, ensuring their successful and profitable delivery. Key responsibilities include:

• Leading pre-contract negotiations and contract administration.
• Managing client & contractor’s relationships, including procurement and performance monitoring.
• Conducting cost analysis and preparing accurate cost estimates and budgets.
• Implementing cost control measures and managing project variations.
• Providing expert Quantity Surveying services, including value engineering and risk management.
• Resolving contract disputes and ensuring compliance with contractual obligations.
• Mentoring and developing junior team members.

Qualifications

• Bachelor's degree in Quantity Surveying, Construction Management, or a related field.
• Minimum 8-10 years of experience in contract management and QS roles within the interior design or construction industry.
• Proven track record in successful project delivery and cost control.
• Strong negotiation, communication, and interpersonal skills.
• Excellent analytical and problem-solving abilities.
• Proficient in relevant software (e.g., estimating software, project management software).

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

The Opportunity

• Exciting opportunity to work in an MNC environment – Beauty Industry (Leader in the industry)
• Monday - Friday/9am to 6pm
• Location: Central
• Salary: Up to $7500
• 6 Months contract - Urgent hire!

The Talent:

• Minimum of 5 years experience in retail with a direct responsibility for visual merchandising & retail concept
• Creates and designs visual concept to animate in a consistent customer path, launches and catalogue
• Ensures technical and legal compliance regarding the production
• Uplifts brand’s visual identity to build customer centric retail concepts

Job Description

• Define and create International Business Division retail design & merchandising strategy in order to elevate the brand image and identity in stores, to reinforce brand visibility, in line with brand equity and brand retailtainment DNA.
• Adapt brand spatial concept to local distribution constraints & business specificities + Implement the merchandising solutions for make-up testers units and POS materials, answering local needs.
• Propose innovative in-store solutions within the frame of distributors partnership
• Coordinate the conception, production, delivery and installation of any kind of local specific materials
• Ensure the respect of brand image in POS
• Support the always on in-store activation of FSS
• Ensure compliance with technical and legal aspects regarding production norms
• Ensure follow-up of the budget
• Monitor the performance of projects taking into account budget and time constraints

Next Step

• Prepare your updated resume (please include your current salary package with full breakdown such as base, incentives, annual wage supplement, etc.) and expected package.
• Click "apply" or send to the following email: [email protected]
• *Only shortlisted candidates will be contacted*

Amelia Lau An Qi

Direct Line: +65 6697 7987
EA License No: 91C2918
Personnel Registration Number: R1987023

• Well Established Company
• Basic $5000 - $6000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• To strategise, organise, govern, and manage a project within a predetermined timeframe that is committed to customer
• To successfully completely New Product Introduction (NPI) projects by meeting all the specifications and requirements and advancing them towards mass production, including anticipating and mitigating potential risks that may negatively impact the projects
• To engage and work with customers on product specifications, requirements, costs, schedules, and quality
• To generate and provide quotations for tools and moulded parts, upon receipt of Request for Quotation (RFQ)
• To collaborate internally with tool designer and engineering team on design for manufacturing (DFM) and proactively manage program documentations, technical and engineering changes
• To update the status of on-going programs to the management
• To consistently pursue for new customers
• To establish and nurture a robust and affirmative rapport with our key customers to secure new and additional projects and pursue new customers to strengthen sales pipeline
• Any ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma / Degree in Mechanical Engineering/Precision Engineering or relevant qualification with minimum 2-3 years relevant working experience
• Knowledge with practical experience in the field of plastic injection and injection tool fabrication, or mechanical product design is needed

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Responsibilities:

• Identify project design hazards, construction risks, and constructability issues.
• Develop corresponding mitigation measures together with the project team.
• Chair regular risk mitigation meetings and training with clients and internal parties.
• Advise management on alternative safer and higher productivity construction methodologies.
• Review method statements and risk assessments for safety and construction compliance.
• Attend meetings related to construction progress, risks, etc.
• Any other duties as assigned by the Managements.

Job Requirements:

• Have reasonable exposure in safety and health for construction especially on transportation infrastructure projects in a similar nature
• Attended the Design for Safety (DfS) for Professional Course and passed the assessment or equivalent.
• A registered PE or Architect with a Practicing Certificate OR
• Minimum 10 years relevant experience in the design and the supervision of the construction of structures with at least 5 years in design which includes contributions to designs and writing specification
• Have a degree accepted by PE Board or Board of Architect and construction related degree accepted by Singapore Institute of Surveyors (SISV) and Society of Project Managers (SPM)
• Possess excellent leadership, planning, good management skills, interpersonal communication and negotiation skills
• Have experience in LTA projects have an advantage

☑ Basic $4000 - $6000

☑ Permanent role + High Variable Bonus.

☑ 5 Days (Mon – Fri: 8.00pm – 5.30pm )

☑ Tampines

☑ Class 1 MNC Builder

Responsibilities

• Prepare and modify precast concrete drawings (schematic, detailed, and production) to meet local standards.
• Design 2D/3D drawings, perform basic calculations, and resolve technical issues.
• Collaborate with clients, consultants, subcontractors, and participate in design meetings.
• Support junior team members and assist with tasks as needed.

Requirements:

• Diploma or Degree in Civil Engineering
• Min 1 -3 years of related experience with Precast Concrete Shop Drawing

Interested applicants are welcome to apply online with updated Resume/CV via Apply Now button or send your updated resume to [email protected]

Only shortlisted candidate will be notified

Kam Soo Leng, Yvette

Registration: R22107492

F&B Concept & Retail Malls

• Produce Concept Design, Space Planning, Materials Presentation, Design Development, Construction Documentation, Specifications and Detailing, and Quality Assurance
• Allocate and produce tender documentation and detailed drawings
• Plan, design, and furnish interiors of commercial
• Handle and complete the project independently from inception to completion
• Manage projects to target deadlines & budgets
• Presentation of the design concept to clients
• Liaise and manage clients, consultants, suppliers, and contractors
• Ensure site complies with design specifications and building regulations
• Conduct client meetings and report of design progress
• Involve in site measurement, layout plan & selection of material used

Requirement

Diploma/Degree holder in Interior Design or Architecture

At least 3 years of relevant experience in the retail/f&b commercial interior fit-out industry

Proficient in 3D Studio Max, AutoCAD, Sketch Up and/or other design software application

@ [email protected]

COMPANY DESCRIPTION

Singapore Management University is a place where high-level professionalism blends together with a healthy informality. The 'family-like' atmosphere among the SMU community fosters a culture where employees work, plan, organise and play together building a strong collegiality and morale within the university.

Our commitment to attract and retain talent is ongoing. We offer attractive benefits and welfare, competitive compensation packages, and generous professional development opportunities all to meet the work-life needs of our staff. No wonder, then, that SMU continues to be given numerous awards and recognition for its human resource excellence.

RESPONSIBILITIES

• Team Leadership & Development
  • Recruit, lead, synergise, nurture and motivate a team of software developers/engineers working on different technical platforms to foster a culture of innovation, collaboration, continuous learning and improvement.
  • Set goals/targets for team, drive action plans to closure, and spearhead the on-time and onbudget delivery of high-quality enterprise digital solutions.
  • Provide hands-on technical guidance and mentorship for team members, including career planning and development.
• Technology Planning
  • Assist supervisor in strategic planning and budgeting to support overall business objectives.
  • Develop and implement technical development strategies and roadmaps, including conducting reviews to gather user feedback, to enhance user experience and digital solution performance.
  • Stay abreast of industry trends and emerging technologies across various platforms to recommend, plan and drive technology innovation, adoption and optimisations.
• Development Standards, Practices & Processes
  • Define and enforce application security, integration and usability standards for on-premise and cloud-hosted solutions to ensure secure, seamless integration and compatibility across different technical platforms.
  • Establish and drive continuous improvement in technical design and development standards, practices and processes (including tools and templates) to improve efficiency and quality.
• Stakeholder Collaboration
  • Collaborate with cross-functional teams, including project managers, business analysts, users and other stakeholders, to translate requirements into technical design and implementation, considering implications across various technical platforms.
  • Form good user relations and cultivate trust among users and team members.
  • Ensure prompt and efficient support services for users, including request and issue management.
• Outsourcing & Vendor Management
  • End-to-end management of vendors, including contract management.
  • Monitor and analyse key performance indicators and risks, ensuring that proposed technical solutions are sound, defined service levels and schedules are met with satisfaction.

• Bachelor's Degree in IT, Computer Science / Engineering, or a related field.
• Minimum 10 years of proven experience in leading and managing software development / engineering teams in a fast-paced and dynamic environment.
• Strong technical background with expertise in software development methodologies, cloud technologies, secure and scalable architecture design. Extensive hands-on experience in SAP (e.g. BTP), PeopleSoft, Azure (e.g. .NET), and / or Low/No-Code (e.g. OutSystems) development platforms.
• Excellent leadership, organisational and communication skills to effectively collaborate with internal and external stakeholders.
• Proficiency in project, outsourcing / vendor and contract management.
• Detail and quality oriented with a driven mindset and initiative to make things happen.
• Ability to provide a balanced view of a problem situation, a clear thinker and good problem solver to guide the team to analyse and simplify complex issues and provide effective solutions.

#LI-ST1

Candidates who do not possess the stipulated qualifications but have relevant work experience may still apply. Remuneration and appointment terms shall commensurate with qualifications and experience. SMU reserves the right to modify the appointment terms where necessary.

• Reporting to the General Manager and responsible for technical specification and definition of industrial systems, products and solutions including system and product design, technical sourcing of such systems / products and digitization applications

• To attend technical review with sales team and technical meetings with clients

• To attend coordination meetings with architects, M&E and structural consultants

• To lead a small team of designers; monitor project design submission schedule, check designs and shop drawings, training designers, etc.

• To attend technical meetings with main contractors. Coordinate pipe clashes with M&E and structural services

• Detailed job responsibilities will be provided upon application

Requirements:

• Bachelor Degree in Mechanical Engineering, Automation or relevant fields

• At least 8 years product and application experience in Construction/Engineering industry

• Good business negotiation and presentation skills

• Excellent communication skills with multinational customers and colleagues.

• Ability to lead technical team for business growth. Exhibit flexibility and agility

• Able to work independently with professional judgments, proactivity and team player spirit.

• Revit & AutoCAD proficient

• Candidates available immediately or short notice preferred

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

A company that aims to provide Contemporary style furniture and styling ideas to house-proud house owners looking for great style and design.

We are looking for like-minded people who are result focused, entrepreneurial, and practical to join our team. Someone who enjoys which will provide professional advice or recommend solution for our customers as an in-house stylists.

Duties and responsibilities include working closely with customers to determine their needs, answer their questions about our products and recommend the right solutions. You should also be able to promptly resolve customer complaints and ensure maximum client satisfaction. Stay up-to-date with product features and maintain our store’s visual appearance in high standards.

Requirements

• Local applicants only with minimum 5 years experiences
• Interior Design skill a PLUS
• Go the extra mile with positive attitude
• Maintain in-stock and presentable
• Remain knowledgeable on products offered and discuss available options
• Build productive trust relationships with customers
• Comply with inventory control procedures
• Works well in a team environment
• Basic understanding of sales principles and customer service practices
• Proficiency in English
• Solid communication and interpersonal skills
• A friendly and energetic personality with customer service focus
• Ability to perform under pressure and address complaints in a timely manner
• Availability to work flexible shifts

• Position : Project Manager (Construction / Interior Design Industry) - Up to $5500
• Location : Toa Payoh Industrial (Bus stop nearby)
• Working hours : 5.5 days a week - Monday to Friday from 9am to 6pm / Sat from 9am to 1pm
• Salary (commensurate with experience) : Gross $5500 (Basic up to $5200 + $300 Transport Allowance if owns a vehicle) + Performance Bonus + 14 Days Annual leave
• Duration : Permanent
• Industry : Interior Fit-out Industry

Main Responsibilities:

• Planning/Controlling/Monitoring/Managing & Directing the assigned project resources to best meet project objective.
• Ensures all changes to specifications, work scopes, and drawings are properly documented.
• Efficient management of resources and materials
• Responsible for project and site supervision, attend site meetings, coordination with sub-contractors, suppliers, consultants and clients and all scope of work that is required in the smooth implementation of a successful project development.
• Assist in resolving any issues or challenges that may arise during the project execution.
• Conduct regular site inspections and quality control checks.
• Ensure compliance with safety regulations and industry standards.
• Collaborate with internal teams to ensure successful project delivery.
• Manage material at the construction site to ensure zero wastage and no overstock of material.
• Manage manpower and overtime costs to ensure optimal cost-benefit within or below budget.
• Coordinate and communicate with project teams, subcontractors, and suppliers.
• Ad hoc duties as assigned.

Requirements:

• Min 3 years of relevant experiences in Interior Fit-out Industry
• Minimum higher NITEC / Diploma holders or candidates with relevant experience and proven track records will also be considered.
• Experience in Construction / Interior Design/ Furniture Industry will be an added advantage.
• Able to start work within short notice preferred.

Email to: [email protected] or call me at: 6398 5689 for more information.

Like us on Facebook or Instagram (For Career tips and Job vacancies): www.facebook.com/search.personnel / https://www.instagram.com/search.personnel

Join us on Linkedin: www.linkedin.com/company/search-personnel-pte-ltd

***We do not charge our candidates any referral fee nor bind them with any contract.***

Jane Chua

Associate Consulting Director (APAC)

License no: 13C6684

EA Personnel: R2197224

Thank you for your interest in this position. Our shortlisting period is 3 working days. Only shortlisted candidates will be contacted for further consideration.

If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend that you continue your job search to maximize your opportunities. We wish you all the best and should we have any suitable roles that match your experiences/ qualifications/ preferences, we will reach out to you.

• 7+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus