Job Description

• Position: Senior Mechanical Design Engineer
• Well Established Marine and Offshore Service Provider
• Working hours: Monday – Friday
• Salary (commensurate with experience): Up to $7,000
• Working Location: Tuas
• Duration: Permanent
• Industry: Marine and Offshore

Main Responsibilities:

• Responsible as the lead for the overall Mechanical engineering project activities.
• Responsible for optimized Mechanical engineering man hour utilization within the project.
• Coordinate between the other trades & internal for engineering integration.
• Coordinate with Project Lead on Project Engineering’s & Procurement Schedule.
• Prepare & Review Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities.
• Review Vendors’ Technical Specification/ drawings to ensure completeness & correctness with our requirement.
• Prepare & Review Equipment Parameter & Mandatory Calculation.
• Prepare & Review Piping Schematics (P&ID).
• Prepare & Review Machinery & HVAC Layout, Equipment Installation & Alignment.
• Prepare & Review Mechanical design and construction standard.
• Review 2D and 3D for piping detail and production design.
• Prepare & Review Testing Protocol & Operation Manual.
• Guiding and checking Mechanical engineer activities.

Requirements:

• Bachelor's degree in Mechanical Engineering or a related field.
• Minimum of 5 years of relevant work experience in marine/offshore industry machinery and piping new-building engineering design.
• Proficient in AutoCAD, Microsoft Office, and AVEVA.
• Knowledgeable about rules and regulations from Classification Society and Authorities.
• Familiar with the theory and calculations related to marine/offshore mechanical and piping design.
• Strong communication and analytical skills.

Email to: [email protected] for more information.

***We do not charge our candidates any referral fee nor bind them with any contract. ***

Eugenie Cheah

Consulting Manager

Reg no.: R24122293

EA No: 20C0257

Job Summary:

The Design Executive reports to the Project Manager and is responsible for creating, interfacing and facilitating design drawings throughout projects' life cycles based on contract drawings and latest information as well as facilitate the flow of information between the design team and project team.

Job Description:

• Prepare, manage and facilitate design drawings using BIM and CAD technologies for building construction
• Take charge of all coordination works of structural and architectural interface with main contractor(s) and other trades for cross-team support
• Ensure all models are compatible and BIM data are made available to all project participants
• Collaborate within design team and other relevant departments to ensure all drawings are in order as per design requirements
• Manage design changes and revisions, resolve discrepancies and queries between design and project teams
• Attend site meetings as required
• Any other tasks as may be assigned from time to time

Job Requirements:

• Diploma/Degree in Architectural/Civil/Structural Engineering or equivalent
• Minimum 5 years of related work experience in similar capacity for construction and architecture projects
• Proficient in MS Office, Tekla, Revit, Navisworks and AutoCAD software
• Knowledge of DGN, DWF, IFC and MicroStation
• Knowledge of native formats of BIM authoring or BIM related applications for design reviews
• Fluent in English with good interpersonal skills
• Strong project management and decision-making skills

Job Description

• Oversee the entire ICA design process, from concept to implementation, ensuring project is delivered on
• time, within specifications and meeting industrial standards.
• Lead and mentor a team of ICA engineers and ensuring the quality in design work.
• Oversee the development of control logic, CMS programming, HMI interfaces, and Sub-Control systems, ensuring seamless communication and synchronisation of control components.
• Oversee the selection of instrumentation, sensors, and transmitters for accurate data acquisition, measurement, and feedback control.
• Oversee the configuration and deployment of the Control Monitoring System for seamless process control and integration of subsystems.
• Ensure ICA designs adhere to relevant safety standards (such as SIL, IEC 61511) and cybersecurity protocols to mitigate operational risks.
• Collaborate with process team to optimise the processes through intelligent control strategies, adaptive algorithms, and data-driven insights.
• Coordinate validation activities, including factory acceptance testing (FAT) and site acceptance testing (SAT), to ensure systems meet performance criteria.
• Develop RFQ and collaborate with suppliers and vendors to source components, equipment, and systems required for ICA and ensuring they meet quality and performance standards.
• Oversee testing and commissioning of the CMS, coordinating with process team to ensure system operate as intended.
• Ensure clear and consistent communication with project client and consultant throughout the project, providing updates, addressing concerns and managing expectations.
• Manage ICA design budgets, including cost estimation, resource allocation, and cost control.

Requirements

• Min. of Bachelor Degree in Electrical, Process Control & Instrumentation, Automation Engineering or related engineering discipline.
• 15 years of relevant ICA engineering experience in the planning, design, SAT/FAT and construction of major waste to energy, water, wastewater, process plant projects or similar major industrial projects. The Design Lead has robust experience in managing a team of suitably experienced Design Engineers and Technicians and interfacing with Client, Suppliers and Subcontractors.
• Familiar with code of practice and standards in Singapore
• Experience with Revit/AutoCAD Plant 3D preferred & in other related design software/applications.
• Familiar with Microsoft Office Suite.
• Excellent communication skills in English, both verbal and written.
• Willingness to take on responsibility and work overtime to meet deadlines.
• Extensive hands-on experience in designing and implementing complex ICA systems in industrial environments.
• Proficiency in programming languages for PLCs (e.g., ladder logic, structured text) and HMI/DCS systems is advantageous.
• In-depth knowledge of control system architectures, such as DCS and PLC-based systems.
• Familiar with industry standards and protocols (e.g., OPC-UA, Modbus, HART, Profibus, Ethernet/IP).
• Strong understanding of process control theory, PID tuning, and adaptive control strategies.
• Experience with functional safety standards (e.g., IEC 61508, IEC 61511) and cybersecurity best practices.
• Excellent problem-solving and troubleshooting skills for resolving complex technical issues.
• Strong leadership and communication skills to guide technical discussions and collaborate with diverse teams.
• Good technical understanding of water, wastewater and WTE related control system.
• Relevant experience in design and site work for water, wastewater treatment and WTE works.
• Highly motivated and ability to work independently with minimal supervision.
• full time work at Tuas project site

Summary:

• Basic up to $4500
• Yearly variable bonus
• 5 days work week
• Location: Pioneer
• MNC company - stable revenue
• Strong in Solidworks
• Familiar with CATIA

Key Responsibilities:

• Produce CNC design solutions for customize specification
• Produce design for automation
• Make drawings (2D & 3D) in CATIA
• Make parts explosion / BOM list using ENOVIA
• Documentation for fabrication
• Evaluation for design solutions
• Support production for machine modification design
• Do engineering presentations
• Other related adhoc duties

Key Requirements:

• Min Diploma in Mechanical Engineering
• Min 2 years relevant working experience
• Strong in Solidworks & CATIA

Interested applicants, please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be notified that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

On behalf of our hiring client who is an Original Equipment Maker (OEM), we are looking for a suitable candidate to join them as Product Design Engineer (Electrical).

Responsibilities:

• Provide technical support to the Project team, Installation on problem verification, report and coordinate with Group on job site issues and technical solutions related to electrical design.
• Involving in design interfacing and parts provision among Group of companies.
• Participate in the resolution of design problems related to Error/Trouble investigation, and formulate corrective & preventive measures.
• Provide engineering support to Sales Team for new products.
• Provide Maintenance Works Inquiry/Spare Parts Inquiry/Order Supports.
• Any other ad-hoc matters assigned by the Manager.

Requirement

• Degree/Diploma in Electrical Engineering with at least 2-3 years experience in electrical design work.
• Proficient in Auto CAD & 3D software is essential
• Fresh degree holders are welcome to apply

EA license : 22C0971 | EA Registration : R21101298

Location: East

• Develop and implement maintenance schedules for machinery and equipment.
  Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
  Liaise internally between operations teams to address machinery breakdowns and operational concerns.Coordinate data collection on auxiliary materials from operations teams and report on a weekly basis.
  Manage receipt, maintenance, and monitoring of machinery parts inventory.
  Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.Undertake additional tasks as required to support operational needs and project requirements.Preferably with at least 3 years of working experience in related field.
• Comfortable working in Workshop environment.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

• Working day: Monday – Friday
• Working Hour: 8:30am - 6:15pm
• Salary range: $3,200 - $5,800
• Location: Woodlands

Job Summary:

The Electrical Controls Design Engineer will be responsible for designing, developing, and implementing control systems for various electrical machines.

This role requires a strong background in electrical engineering, control systems, and a deep understanding of machine operations.

The ideal candidate will be able to work collaboratively with cross-functional teams to ensure the successful delivery of projects.

Key Responsibilities:

• Design and develop machines control systems, with motion controller, robot, PLCs, HMIs, and servo drives.
• Create detailed electrical schematics, wiring diagrams, and layout drawings.
• Program and configure control systems to meet specific project requirements.
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Ensure the proper functioning and integration of control components.
• Conduct testing, debugging, and troubleshooting of control systems.
• Collaborate with mechanical engineers, software developers, and other stakeholders to integrate control systems into larger machinery.
• Ensure compliance with relevant safety standards and regulations.
• Provide technical support and training to manufacturing and maintenance teams.
• Participate in project planning, including cost estimation, scheduling, and resource allocation.
• Maintain detailed documentation throughout the project lifecycle.
• Stay updated with the latest industry trends and technologies to continuously improve control system designs.

Requirements:

• Diploma or bachelor’s degree in electrical engineering or a related field.
• 3+ years of experience in designing and implementing control systems for electrical machines.
• Experience with CAD software for electrical design (e.g., AutoCAD Electrical, E3, EPLAN).
• Strong knowledge of control theory, electrical circuits, and automation.
• Familiarity with industry standards and regulations (e.g., IEC, IEEE, NEC).
• Ability to manage multiple projects and meet deadlines.
• Experience with robotics and motion control systems.
• Knowledge of communication protocols (e.g., Ethernet/IP, Modbus, CAN).
• Experience with simulation software (e.g., MATLAB/Simulink).
• Certification in Control Systems Engineering (CSE) or related credentials.

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

• Responsible for all major mechanical and electrical and instrumentation equipment
• Lead a team of technical executives/technicians for troubleshooting works
• Manage the purchase of major supply and repair items alongside with supervision and execution of preventive and condition monitoring of major electrical equipment
• Handle hands-on preventive maintenance and breakdown maintenance work
• Coordination with clients and subcontractors to meet the site/project requirements
• Carry out rectification of faults within a specified time
• In-charge of troubleshooting of M&E system
• Responsible for planning, execution and supervision of all facilities management and operational activities
• Responsible for project cost control and service standards
• Any other ad hoc duties assigned

Job Requirements

• Degree or Diploma in Engineering.
• 3-5 years of relevant working experience
• Technical knowledge of M&E systems(including, but not limited to, fire protection systems, AV systems and ACMV systems) is an added advantage
• Able to perform shift work if required
• Preventive Maintenance Troubleshooting

Job Overview:

We are seeking a skilled and motivated Electrical Engineer to join our Mechanical & Electrical (M&E) company. The ideal candidate will be responsible for designing, implementing, and overseeing electrical systems in various projects while ensuring safety, efficiency, and compliance with industry standards.

Key Responsibilities:

• Design and develop electrical systems and components for M&E projects.
• Prepare technical drawings, specifications, and reports for electrical installations.
• Conduct site inspections to ensure work complies with design plans, standards, and regulations.
• Collaborate with the project team, including mechanical engineers, contractors, and clients, to deliver seamless integration of M&E systems.
• Oversee and coordinate the installation, testing, and commissioning of electrical systems.
• Perform load calculations, energy audits, and system analyses to optimize performance.
• Identify and resolve technical issues during the project lifecycle.
• Ensure compliance with safety codes, electrical regulations, and quality standards.
• Prepare and manage budgets, schedules, and timelines for electrical works.
• Stay updated on advancements in electrical engineering and M&E technologies.

Requirements:

Education:

• Bachelor’s degree in Electrical Engineering or a related field.

Experience:

• Minimum of 5 years of experience in electrical engineering, preferably in the M&E industry.
• PLC and HMI programming
• BMS

Technical Skills:

• Proficient in electrical design software (e.g., AutoCAD, ETAP, Revit).
• Strong knowledge of electrical codes, standards (e.g., NEC, IEC), and local regulations.
• Experience in PLC, VFD,BMS

Soft Skills:

• Strong problem-solving and analytical abilities.
• Excellent communication and teamwork skills.
• Ability to work independently and manage multiple tasks effectively.

What We Offer:

• Competitive salary and benefits.
• Opportunities for professional development and certifications.
• Exposure to challenging projects in a dynamic industry.

How to Apply:

Interested candidates are encouraged to submit CV and a cover letter to [email protected] with the subject line: "Application for Electrical Engineer – [Your Name].

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Architecture invites applications for one Practice Track position in Architectural Design.

The Department of Architecture in the College of Design and Engineering is ranked among the top 10 in the world, and Asia’s best in Architecture/Built Environment, by the Quacquarelli Symonds (QS) World University Rankings (2023). It offers the professionally accredited Master of Architecture programme as well as a range of graduate and undergraduate programmes in related fields such as urban planning/design, landscape architecture and conservation. The faculty is correspondingly diverse and international. The Department offers internationally competitive remuneration, generous employment benefits as well as access to research funding for both junior and senior academics. International applicants will also receive subsidized housing at Kent Vale.

Qualifications

Research by Design (RxD) at the Department of Architecture seeks qualified, interdisciplinary, and inspirational candidates with expertise in creative practice research (research through design, as opposed to research for design or research about design). We seek candidates with expertise in design with foundations in decarbonized & planet-positive futures, warming world futures, social justice, and inclusive futures, with a particular focus on being situated in the tropical geographies of Southeast Asia and the equator. Candidate research should be manifested through a robust portfolio of creative practice outputs and substantiated through forms of peer review and public and societal engagement, with evidence of leading with anticipatory and future-forward design ideas that impact evolving society and the profession. We are especially interested in candidates who are leaders in Research by Design methods in the academy and who leverage creative practice to imagine and manifest a more just world.

Successful candidates are expected to teach and lead design studio courses related to research by design, with core, elective, and seminar courses to complement the design studio.

All qualified individuals are encouraged to apply. To apply, please provide the required documents in pdf and indicate which position you are applying for.

1. A letter of interest
2. A complete Curriculum Vitae
3. A Statement of Teaching (maximum two pages)
4. A Statement of Research (including a short research plan for next three to five years maximum three pages) – citing up to five significant publications, creative work or other scholarly contribution and explaining their significance, and a writing sample.
5. Names of four referees with contact details (who will be contacted only if shortlisted). Please highlight any who is a member of your PhD dissertation committee.
6. Portfolio of work showing research through design

In accordance with the Personal Data Protection Act (PDPA), please provide consent for the collection, use and disclosure of personal data, using the NUS Personal Data Consent for Job Applicants form.

Only shortlisted candidates will be notified.

Evaluates project information, confers and corresponds with client representatives in coordination with the

Project Manager/Principal to determine project parameters and requirements.

Develops design concepts for project(s).

- Leads design development of client’s interior program through development of photographic image studies.

- Develops interior design to meet the client’s programmatic requirements and assure technical suitability.

- Develops conceptual ideas graphically.

- Leads design charettes.

Participates directly in each project from programming through project completion.

Leads presentation and design drawings.

Be the creative head.

- Develops block plans and bubble diagrams.

- Leads and reviews design details.

- Corrects / revises drawings with minimal supervision.

Coordinates with design team to ensure integration of design and interior design elements.

- Provides guidance to other members of the design team to ensure that design documents are in appropriate formats.

- Participates in all charettes.

- Monitors and sometimes coordinates the design work of consultants.

Is responsible for quality control for the interior design function, including:

- Accuracy of each segment of work as it is completed.

- Conformance to company design standards.

Project Management

- Establishes program with Project Manager/Principal.

- Responsible for all projects within the team.

- Participates in determining the skills required of other team members for the project and the selection of those team members.

- Prepares progress reports. Alerts Project Manager to any changes in scope, lack of information or decisions from client.

Oversees interior design aspects of construction:

- Assists with construction oversight for general conformance with the interior design concept.

- Responds to construction questions as they relate to interior design issues.

Directs / supervises the gathering of the technical specifications for various interior design elements (FF&E).

- Selects and directs materials for project.

Confers and corresponds with client representatives, to determine project parameters / requirements; participates in design presentations.

Directs construction of finish boards.

Participates in the development of “in-house” design standards; assures that design policies, procedures, standards and philosophies are adhered to.

Responsible for personal and staff development

- Performs senior staff development duties such as mentoring, training, supervising and directing junior staff.

- Participates in management and leadership groups.

Job Description

• Prepare, manage, and facilitate design drawings utilizing BIM, Rino, Grasshopper and CAD technologies.
• Ensure all models are compatible and that BIM data is accessible to all project participants.
• Oversee coordination between architectural and structural interfaces, collaborating with main contractors and other trades for effective cross-team support.
• Work closely with the design team and other relevant departments to ensure all drawings meet design specifications.
• Manage design changes and revisions, addressing any discrepancies and queries between design and project teams.
• Attend site meetings as required and perform additional tasks as needed.

Requirements

• Degree in Architecture, Civil Structural Engineering, or a related field.
• Minimum of 4 to 5 years of relevant experience in construction and architectural projects.
• Proficiency in Revit, Navisworks, Rino, Grasshopper, AutoCAD, and MS Office.
• Knowledge of DGN, DWF, IFC, and MicroStation is a plus.
• Strong project management and decision-making skills.
• Ability to work effectively as part of a team as well as independently with minimal supervision.

We regret only short listed candidate will be notified. All applications will be treated with the strictest confidence.

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities

• Specify requirements and features for semiconductor equipment.
• Conceptualize and establish the architecture of innovative equipment.
• Engineer mechanical systems, incorporating the selection and utilization of motors, actuators, gear drives, pumps, and valves.
• Generate intricate engineering drawings.
• Conduct design verification and validation testing to guarantee adherence to specifications, safety regulations, and product requisites.
• Enhance the design of existing machines.
• Utilize analysis tools such as Fish Bone Diagram, FMEA, etc. to optimize processes.

Requirements

• 5 years of experience in semiconductor equipment design
• Expertise in designing automation and high precision machinery, including High-Speed Pick and Place mechanisms
• Proficient in 3D CAD software and equipment troubleshooting
• Capable of producing detailed mechanical drawings and applying knowledge of Geometric Dimensioning & Tolerancing

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg


Please WA Justine @ 9755 9161

Shortlisted candidates will be notified

Justine Lam Nyok Yuen

Reg No. R1218722

Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

Location: Central area

Position Overview:
This role is ideal for individuals who are passionate about designing and implementing technology solutions while providing technical support for smooth operations. As an Infrastructure Engineer, you will contribute to infrastructure planning, project execution, and end-user support to ensure seamless technology integration and customer satisfaction.

Key Responsibilities:

• Assist senior engineers in planning and designing technology schematics and infrastructure solutions.
• Develop detailed bills of materials and provide proactive recommendations for technology enhancements.
• Take full accountability for assigned projects, overseeing the installation, field deployment, and implementation phases through to completion.
• Maintain up-to-date project schedules and cost sheets, ensuring timely reporting of progress to senior staff.
• Provide technical and desktop support for end-users, ensuring system reliability and resolving issues effectively.
• Collaborate with customers to understand requirements and communicate solutions, fostering positive relationships.

Preferred Skills and Qualifications:

• Strong knowledge of Windows operating systems, endpoint security, and basic networking configuration.
• Familiarity with helpdesk systems and processes.
• Excellent communication skills to manage end-user interactions and articulate technical solutions.
• Capable of planning delivery timelines and coordinating with stakeholders effectively.
• Detail-oriented, with the ability to manage multiple tasks and meet deadlines.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Job Description

• Industry/ Organization Type: Manufacturing/Food Production
• Position Title: Marketing & Design Coordinator (Food Products)/ Marketing Executive
• Working Location: Jurong West
• Working Hours: 5 days, Mon - Fri (8 am – 5 pm)
• Salary Package: Up to $2900 (basic) + $90 (Transport Allowance) + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Oversee brand promotional activities and manage packaging artwork edits.
• Act as an in-house designer for urgent packaging modifications and creation of new Point of Sale Materials (POSMs).
• Maintain and update website content.
• Assist in the development and planning of new products, guiding them from concept to commercialization.
• Support additional marketing activities as needed.

APPLY NOW!!!

• Minimum Diploma holder with 1-2 years of relevant experience.
• Proficiency in using Adobe Illustrator and Photoshop for designing and editing artwork and packaging.
• Experience with social media marketing is highly desirable.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69402 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Manufacturing/Food Production
• Position Title: Marketing & Design Coordinator (Food Products)/ Marketing Executive
• Working Location: Jurong West
• Working Hours: 5 days, Mon - Fri (8 am – 5 pm)
• Salary Package: Up to $2900 (basic) + $90 (Transport Allowance) + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Oversee brand promotional activities and manage packaging artwork edits.
• Act as an in-house designer for urgent packaging modifications and creation of new Point of Sale Materials (POSMs).
• Maintain and update website content.
• Assist in the development and planning of new products, guiding them from concept to commercialization.
• Support additional marketing activities as needed.

APPLY NOW!!!

• Minimum Diploma holder with 1-2 years of relevant experience.
• Proficiency in using Adobe Illustrator and Photoshop for designing and editing artwork and packaging.
• Experience with social media marketing is highly desirable.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69402 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Senior/Civil & Structural Design Engineer (A1 main contractor)

Our client is a leading reputable A1 main contractor renowned for their impressive portfolio of iconic mixed development, residential and industrial building projects across Singapore. They’re now looking for a Senior/C&S Design Engineer to join them for an iconic institutional building project in the CBD area, supporting their ongoing contributions to the Singapore building landscape.

Job Responsibilities

• Provide technical expertise in the design and coordination of the civil and structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree in Civil/Structural Engineering, Construction Management, or related field
• Minimum 4 years of relevant building project/steel structures experience
• Possess knowledge of preparing construction sequencing drawings
• Experienced in resolving site issues too

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

About VSMC

VisionPower Semiconductor Manufacturing Company Pte Ltd (VSMC) is a new joint-venture 300mm semiconductor wafer manufacturing facility to be built in Singapore. We are looking for committed, resilient and passionate talents to launch a promising future that power the next generation devices and systems. If you share the same passion to pursue excellence, join us to make an impact and be part of something special!

Role Summary

You will be responsible for successful customers’ product full lifecycle, including but not limited to, technology transfers, new products introduction, device performance, yield, and reliability of our advanced technologies

Key Responsibilities

• Take charge for successful new products qualification and technology transfers from motherfab
• Complex data analysis to identify process design weaknesses and/or manufacturing tool issues.
• Design and execute experiments, analyse complex data sets and derive actionable insights to improve yield and performance for each specific technology and/or products
• Collaborate with the engineering teams to maintain process stability and provide technical solutions to customers

Education Qualification & Essential Experiences

• A bachelor’s degree or higher in Electrical and Electronics Engineering, Chemical Engineering, Materials Science, Physics, or a related STEM field
• Minimum of 4 years of experience in silicon process flow enhancements and managing process shifts, changes with design rules and product layout, ensuring optimal yield, electrical test and product performance with short-and long-term reliability implications considerations
• Must be available to travel to Taiwan for a training period lasting 6 to 9 months
• Fresh graduates welcome to apply

Key Skills and Attributes

• Good interpersonal and communication skills to work effectively across functions and geographical teams with diverse background
• Strong analytical and problem-solving skills to achieve positive results and outcome
• Goal driven and an excellent team player that can work under pressure in a dynamic and fast-paced environment
• Has a growth mindset, prioritizing adaptability, resilience, innovation, and ongoing learning to support business needs

VSMC promotes diversity and inclusivity in our workforce; and hiring will be conducted in phases

Job Description

1. Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met.

2. Support Quantity Surveyors in conducting site measurement and inspections.

3. Able to plan / coordinate site works and resolve drawing details and discrepancies.

4. Any other tasks assigned by the management.

Requirement

1. Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil/Structural) or equivalent.

2. Minimum 5 years construction experience with experience in civil construction industry.

3. Be able to work independently with minimum guidance and able to work within tight deadlines.

4. Bilingual in English and Mandarin is preferable

Interested applicants, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities

2. Current and Expected salary

3. Reason for leaving

4. Date of availability

5. Education background

6. Recent photo

Responsibilities:

· Coordinate and Supervise project work on various site

· Manage project schedule efficiently

· Review M & E Drawings

· Follow up on drawing discrepancies

· Implement project planning, design, material requisition, cost control and documentation

· Ensure smooth progress of works on site and timely completion

· Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

· ITE/Poly/Diploma/Degree in Electrical in any engineering field

· Prior experience in interior fit out works would be an added advantage

· Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)

· Fluent in English, both written & spoken

· Independent, resourceful, pro-active and team player

· Possess good organization, planning and project management skills

· Ability to work under tight deadlines

· 5 days’ work week

· Central area near MRT

· Reputable and stable organization

Job Responsibilities:

· Provide pre-sales and post-sales technical support to customers and internal sales team, handling customer NDA and sample request

· Collect customers’ feedback and provide recommendation to customer for design requirements, product enhancements and capture new product opportunities

· Responsible for identifying and clarifying any technical issues related to new or existing products, and clearly communicate findings to the respective business unit

· Hands-on technical support to customers, documenting problems, and suggesting solutions

· Report design, reliability and functional problems to the appropriate groups within company & associate groups and work to solve problems

Requirements:

· Degree in Engineering (Electronics) or equivalent

· 5 years of technical customer support experience in semiconductor industry

· Field experience or hands-on practice or knowledge of multi-disciplinary system design and development

· Knowledge of Smart Card, RFID and microcontroller products; knowledge of physical access control and the security industry is desirable

· Experience with or knowledge of one or more of: CCD, CMOS image sensors, image capture, video standards, image processing

We would like to invite interested applicants to apply.

Thomas Tan

Registration No: 12C6253

License No: R2094900

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

Under the revised Employment Agencies Licence Condition 5(b), employment agencies (EAs) are required to collect the personal data (e.g. NRIC, FIN) of applicants referred to employers for permanent or contract job positions of at least 6 months with a fixed monthly salary of $3,300 and above. PDPA requirements on collection, use and disclosure of personal data are not applicable to EAs that are collecting such information, as it is a regulatory requirement.

https://www.mom.gov.sg/faq/submit-quarterly-referral-and-placement/are-employment-agencies-allowed-to-collect-personal-data

Requirement

• Diploma/Degree in Information Technology/Computer Science or any related study
• At least 3 years of relevant experience
• Skills on SDLC, CI/CD, Agile

Responsibilities

• Develop, maintain and administer tools which will automate operational activities and improve engineering productivity
• Identify industry best practices/solutions and pursue continuous improvement opportunities in SDLC / SDLC2 (Software Development Life Cycle) processes and practices, relentlessly drive for standardization, automation and self-services.
• Develop reusable, scalable, and testable automation scripts and tools for routine and repetitive tasks.
• Drive alignment efforts between development and operations teams to better recognize benefits of automation and cloud.
• Ability to research, propose and prototype new principles, technologies, tools and concepts and integrated them into the teams collective knowledge.
• Developing CI/CD roadmap and implementing to the projects. Help on AGILE/SCRUM Methodologies while execution.
• Manage and builds EAPI with Unit testing, Code Coverage, Enhancements. Same promote to Production through Jenkins CI/CD Pipeline.

Interested applicants, Please send your updated resume in Word format to [email protected]

Please indicate Job Code 109 on email subject

We regret that only shortlisted candidates will be notified.

IT Consultancy & Services Pte Ltd

EA No: 92C5311 | EA Reg No. R1104129

Please visit www.itcspl.com to learn more information about ITC

Responsibilities:

• Oversee the construction activities and progress, plan, implement, and monitor work
• Schedule following the master and detailed work program
• Liaise with a Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle technical and engineering problems
• Guide supervisors about construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep the site safer and neat
• Supervise ongoing site activities closely

Requirements:

• Diploma in Civil Engineering or equivalent
• must have Lifting Engineer Certification for a Senior role
• Experienced in Singapore underground project, D/wall, and other structural works
• Minimum 2 years of relevant experience in LTA Project is preferred
• willing to work 6 days and/or 5.5 days per week

• Support Project Manager in planning and execution.
• Coordinate construction tasks per schedules and standards.
• Prepare and submit project documents and reports.
• Liaise with clients, consultants, and subcontractors effectively.
• Supervise site work to ensure quality compliance.

Requirements:

• Minimum Dip/Deg in Electrical Electronics Engineering with at 4 years of relevant working experience.
• Proficient in basic programming software such as VB, C, C++, Java, C# etc is advantageous.

Interested candidates please send in your resume to:

Yvonne Suan Ying Zhen

CEI No: R24122857

Email: [email protected]

EA License No: 99C4599

*All information will be treated with strictest confidence. We regret that only short-listed applicants will be notified.