• Taking the conceptual design through to implementation and handover;
• Ensure that all design is in compliance with local authorities’ code.
• Ensuring sustainability targets are incorporated into the design;
• Production of tender documentation, including project specifications and contract schedules such as Summary of Tender and Schedule of Rates;
• Progressing the design in accordance with the Design Checklist;
• Chairing sub-contractor progress meetings;
• Chairing Architectural Department Client weekly Meetings;
• Liaising with Quality Assurance / Quality Compliance engineers to ensure alignment of supervision goals with specification requirements;
• In the absence of a Lead Architect, the Senior Architect shall assume the role and responsibilities assigned to the Lead Architect position;
• Mentoring of an Architect with the intent of securing properly trained personnel to ensure the continual expansion of the company;
• Ensuring Architectural System Supervisor is provided with the current approved plans and shop drawings;
• Ensuring Architectural System Supervisor is fully briefed on the awarded scope of work, the tender technical documents and all contractual revisions to tender documentation.

Other Duties

• To promote safe working practices and to protect the health and wellbeing of Employees, Sub-contractors and customers;
• To undertake the assigned work scope in a professional and responsible manner;
• To protect the interests of the company;
• The role could vary between pricing, design, construction, commissioning, through to final acceptance;
• Ad hoc duties as determined by management.

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Job description and scopes:

1. Oversee and supervise C&S design, including authoring submissions and coordinating with consultants and architects and architects
2. Design Coordination with Consultant, Client , AC, Inter-Disciplines (MEICA & BS) and Sub Contractors
3. Design Package preparation for MEICA Equipment Plinth and Bolts design
4. Prepare & update Schedules for Architectural Authority Submission & ST Submissions
5. Prepare & update Schedules for Submissions of Deliverables list
6. Prepare RFI & RFC for CSA related items
7. Prepare the workflow of QPD / QPS Roles
8. Prepare the BCA Permit forms for site commencement
9. Review and comments of Architectural authority Submission drawings (such as URA, FSSD, PUB, LTA, NEA ,etc…)
10. Review and comments of BCA Submission of Civil, Structural and Geotechnical work (ST Submissions)
11. Review and comments of IFC drawings , which are extracted from 3D Model
12. Review and comments of Shop drawings, developed by Sub-contractors for Construction
13. Review and comments of Design Drawings and Calculations of Miscellaneous design
14. Review and comments of QA / QC documents
15. BIM 3D Model review and Comments and clash resolutions
16. Follow up on Prolog Submissions
17. Follow up with Inter-disciplines leads for Design Input information for C&S design
18. Change Register for design change control
19. Preparing RFQ Packages for CSA items ( Design Drawings & Specifications ) to Procurement
20. Monitor Site construction Progress & addressing site issues
21. Assist and attending BIM Model Walk-through, Hazop , Almop and Dfs, PSR and Risk management Work shops
22. Co-ordinate and Attending Monthly Progress Meeting & CSA progress meeting with Client & Consultant , and Main QP
23. Co-ordinate and attending SOCT Meeting with potential sub-contractors & suppliers
24. Prepare MOM of CSA Meeting, presentation slides for Monthly progress meeting & preparing Monthly progress report for CSA updates
25. Verifying Claims from design consultant
26. Prefer to assis on the Role of Lifting Engineer , review Lifting plans and approval of Lifting Permit

Requirements (Qualification & Experience):

• With relevant experience in managing similar complexity and scale
• Applicants with Lifting Engineer certification will be preferred

About our client: Our client is in the Waste management industry.

About the role:

• Products / Systems Manage product life cycles including new products and accessory configuration updates.
• Create and maintain solution and product catalogue to support commercialization. Actively support new project proposals when new offers are needed for pre-sale and bidding requirements.
• Focus on Product and system Application Development for Southeast Asia and China, including technical understanding and application of engineering solutions, a variety of industrial equipment / components going into the solutions, system automation know-hows, and digitization trends. At the same time, finding local alternatives to address cost and delivery needs.
• Co-operate with Partners in each market for New Product Application development. Technically source from qualified partners. Manage confidentiality, IP and Business cases.
• Handle Product & Technical Complaints and provide On-site Services to support project teams if needed.
• Set up database with product catalogue to track in Projects – what new products used in what projects, lessons learned, recommendation for future projects, wish list for new products.
• Carry out market research in each country with insightful intelligence, analyse, and formulate into product market competition strategies to integrate into product development plan.

Design (Team with 3 designer)

• Standardize design fundamentals, identify gaps to improve.
• Lead and Work with design team in each office to proactively design into opportunities and ensure design accuracy with local needs.
• Establish proactive Relationship with Influential Project Consultants and design houses for Technical Spec-in. Track such leads as a KPI to drive for pipelines with business leaders.

Commercial / Cross functional Co-responsibilities

• Define choices of products / solutions for commercial team to choose from to meet market demand.
• Define product plan for each year by working with cross functional team.
• Collect customer demands with and through commercial team to solution specifications to enable new product development. Provide timely technical Supports to commercial team to remove product barriers.
• Implement strategic pricing practices while collaborating with Sales and management to strive for balanced decision.
• Carry out Regular On-site Examinations for Key Projects to validate new product functionality and existing product and system function issues (feedback from team) and provide improvements.
• Work with market communication team and R&D to design Product promotion scheme, provide training for sales, distributors and customers. Participate in and work with the marketing in various academic conferences, exhibitions and other marketing activities.
• Align with Global product strategy and information sharing representing the region. Make and update sales tools related to products. Be the regional owner to link global initiatives for product introduction and launching champion with support from market communication.

Sales Support

• To attend technical review with sales team
• To attend technical meetings with clients

Project Support – HDB (Before Main Contractor)

• To attend coordination meetings with architects, m&e and structural consultants
• To coordinate and determine the level of pipe sleeve crossing under major roads
• To coordinate the level of pipe sleeve with major services such as sewer, power cables, etc
• To determine the position and depth of launching pits that will aid the installation under major roads
• To study and highlight authority requirements during the meeting.
• To reply to HDB review form
• To reply to NEA BP, DC, WD Advise
• To produce preliminary drawings to aid the tender process for main contractor
• To prepare drawings for PWCS QP endorsement
• To prepare drawings for Acoustic Consultant’s specifications
• To prepare drawings for MV provisions to be designed by MV consultant

Project Support – HDB (With Main Contractor)

• To attend technical meetings with main contractors
• To coordinate pipe clashes with m&e and structural services

Design Support

• To generate fabrication drawings for non-standard equipment
• To monitor project design submission schedule
• To allocate work assignments to other designers
• To check designs, shop drawings done by other designers
• To hold trainings to designers

About you:

• Bachelor’s or master’s degree in automation, mechanical engineering or relevant fields.
• More than 8 years product and application experience in Construction/Engineering industry.
• Good business negotiation and presentation skills.
• Excellent communication skills with local and western customers and colleagues.
• Good leadership to lead technical team to enable faster business growth.
• Proper flexibility and agility.
• Goal and results oriented.
• Able to work independently with professional judgments, proactivity and team player spirit.
• Willing to take up challenging assignments with such track records.
• Revit & AutoCAD

Other information:

• Work location: Central
• Working days: Mon-Fri, 9am to 6pm

*Please note that only shortlisted candidates will be contacted.*

Employment Agency: Kingsforce Management Services Pte. Ltd.

Employment Agency Licence No: 94C3545

EA Personnel: Wong Pik Kiun (Kimberly)

EA Personnel Reg. No.: R1984508

Summary

Do you love taking on big challenges that require exceptionally creative solutions? Do you deeply understand how an incredible camera experience should work? The Camera Technologies group designs innovative technology that allows each generation of Apple products to produce photos even more incredible than the last. We design and develop groundbreaking ideas for everything involved in our camera systems, from sensor to lens. We collaborate with teams across Apple to research, design, develop, test, and qualify camera hardware for Apple products. Together, we’ll craft a magical photography experience that redefines what millions of customers can expect from their cameras. Bring passion and dedication to your job and there's no telling what you could accomplish. The Camera Hardware Engineering group is responsible for all research, design, development, test, and qualification of camera hardware for Apple products. We are searching for extraordinary Hardware Engineers to take ownership in the development and system integration of very high-performance, compact camera modules. The successful applicant will take leadership of camera hardware projects in engagements with product and technology teams.

Description

• Definition and trade-off studies of RGB camera optics, sensors, actuator, and packaging.
• Interaction with optical, electrical, process, controls systems, sensing, test, and mechanical teams on integration of camera hardware into products.
• Leadership of offshore manufacturing partners on camera design evaluation, product prototype builds, and qualification.
• Leadership of failure analysis and corrective action implementation at manufacturing sites as well as remotely, including assembly processes, testing, and calibration; parametric-data analysis of end-of-line yield and post-reliability failures.
• Evaluation and debugging of camera HW at module and product levels for Camera Design and Integration.
• Documentation of camera-specific design, test, and manufacturing requirements.
• International travel may be required to supplier facilities for product development and production bring-up.

Minimum Qualifications

• BSc/MSc/PhD in relevant field (Electrical Engineering, Mechanical Engineering, Optics, Physics, Materials or equivalent).
• Able to communicate and convey ideas clearly and concisely.

Preferred Qualifications

• Ability to lead a multi-functional team of engineers and scientists with unique background and technical expertise through the R&D phase of product development from concept to mass production is a key requirement.
• Ability to influence other teams, manage risk, make decisions with limited amount of information, deliver against a fast-paced development schedule are key requirements.
• Able to communicate and convey ideas clearly and concisely.

The applicant will also be familiar with at least 3 of the skills listed below:

• Design and tolerance analysis of highly constrained, high-volume actuators or translational mechanisms.
• Electronic circuit and system design including power and signal integrity.
• Understanding of geometric optics and image quality evaluation including test charts, algorithms, and lighting.
• Image/depth sensor design or characterization.
• Compact module manufacturing processes such as sensor attachment, flex attachment, active alignment, etc.
• Failure analysis techniques such as optical microscopy, X-ray, CT scans or SEM.
• Demonstrated ability in root-cause and corrective-action analysis.
• Proficiency in statistical analysis, data reporting, and visualization.
• Proven track record of successfully delivering new products into mass production on time, meeting yield and efficiency targets.

Summary

Do you love taking on big challenges that require exceptionally creative solutions? Do you deeply understand how an incredible camera experience should work? The Camera Technologies group designs innovative technology that allows each generation of Apple products to produce photos even more incredible than the last. We design and develop groundbreaking ideas for everything involved in our camera systems, from sensor to lens. We collaborate with teams across Apple to research, design, develop, test, and qualify camera hardware for Apple products. Together, we’ll craft a magical photography experience that redefines what millions of customers can expect from their cameras. Bring passion and dedication to your job and there's no telling what you could accomplish. The Camera Hardware Engineering group is responsible for all research, design, development, test, and qualification of camera hardware for Apple products. We are searching for extraordinary Hardware Engineers to take ownership in the development and system integration of very high-performance, compact camera modules. The successful applicant will take leadership of camera hardware projects in engagements with product and technology teams.

Description

• Definition and trade-off studies of RGB camera optics, sensors, actuator, and packaging.
• Interaction with optical, electrical, process, controls systems, sensing, test, and mechanical teams on integration of camera hardware into products.
• Leadership of offshore manufacturing partners on camera design evaluation, product prototype builds, and qualification.
• Leadership of failure analysis and corrective action implementation at manufacturing sites as well as remotely, including assembly processes, testing, and calibration; parametric-data analysis of end-of-line yield and post-reliability failures.
• Evaluation and debugging of camera HW at module and product levels for Camera Design and Integration.
• Documentation of camera-specific design, test, and manufacturing requirements.
• International travel may be required to supplier facilities for product development and production bring-up.

Minimum Qualifications

• BSc/MSc/PhD in relevant field (Electrical Engineering, Mechanical Engineering, Optics, Physics, Materials or equivalent).
• Able to communicate and convey ideas clearly and concisely.

Preferred Qualifications

• Ability to lead a multi-functional team of engineers and scientists with unique background and technical expertise through the R&D phase of product development from concept to mass production is a key requirement.
• Ability to influence other teams, manage risk, make decisions with limited amount of information, deliver against a fast-paced development schedule are key requirements.
• Able to communicate and convey ideas clearly and concisely.

The applicant will also be familiar with at least 3 of the skills listed below:

• Design and tolerance analysis of highly constrained, high-volume actuators or translational mechanisms.
• Electronic circuit and system design including power and signal integrity.
• Understanding of geometric optics and image quality evaluation including test charts, algorithms, and lighting.
• Image/depth sensor design or characterization.
• Compact module manufacturing processes such as sensor attachment, flex attachment, active alignment, etc.
• Failure analysis techniques such as optical microscopy, X-ray, CT scans or SEM.
• Demonstrated ability in root-cause and corrective-action analysis.
• Proficiency in statistical analysis, data reporting, and visualization.
• Proven track record of successfully delivering new products into mass production on time, meeting yield and efficiency targets.

Senior IT Business Analyst/Product Design
Duration: 12 Months (convertible to perm)
Location: Beach Road


YOUR RESPONSIBILITIES:

• Lead program/project requirements and design sprints to define business and technical requirements through design implementation.
• Manage the requirements delivery (planning, estimation, risk management, reporting) to succeed in meeting overall program/project delivery.
• Leverage business knowledge to advise features/requirements priorities to delivery leads and/or product owners.
• Gather requirements by facilitating/coordinating meetings and conversations between business users, product owners, designers, SMEs, tech leads, and other relevant stakeholders.
• Identify people and systems impacted by functional and non-functional requirements.
• Collaborate with AI-enabled tools and methodologies to ensure requirements are effectively integrated into AI-supported workflows.
• Create/gather acceptance criteria in user stories and prepare any requirements specifications.
• Validate AI-generated outputs, ensuring alignment with business objectives and compliance with pre-set rules.
• Proactively engage, manage, and build strong relationships with clients and stakeholders.
• Work closely with Developers, DevOps engineers, Designers, and QA teams during all phases of the development lifecycle.
• Participate actively in mob programming sessions to facilitate AI-supported collaboration and contextual alignment among team members.

Requirements:

• Degree in Information Technology or equivalent.
• Relevant domain: Financial Institution, Retail, E-Commerce, Environmental, Social, and Corporate Governance (ESG).
• With more than 5 years of working experience in IT business analysis, including experience in AI-driven workflows or collaborative AI-enabled team structures.
• Good understanding of enterprise applications or prior experience in various tech products/development stacks is ideal but not mandatory.
• Strong familiarity with AI tools such as ChatGPT, GitHub Copilot, Jira Automation, or other AI-enabled platforms is a plus.
• Participated in full software or product development cycles.
• Knowledge and experience of Agile development practices.
• Experience working within teams or other high-collaboration environments is highly desirable.

This is an exciting opportunity for an experienced Design & Technology teacher to join a growing, boutique school in the heart of Singapore. The successful applicant will be expected to teach Design & Technology from ages 9-16, Upper Primary to IGCSE. The school offers IGCSE Design & Technology so experience in this area would be an advantage. They will have outstanding subject knowledge and have the ability to enthuse and inspire students, maximising achievement and progress at all levels. A teacher with flexibility, resilience, and a caring and kind approach towards students. A learner with a drive to develop creative new approaches to student learning within a collaborative environment.

KEY RESPONSIBILITIES

• Deliver the Design & Technology curriculum to assigned classes in accordance with the school’s timetable.
• Differentiate lessons according to the abilities and learning needs of individual students.
• Promote independent learning by adopting teaching and learning strategies which develop the competence and confidence of every student.
• Ensure the thorough implementation of subject specifications, teaching schemes, assessment policies and reporting procedures.
• Assess and develop the Design & Technology curriculum in the school
• Plan and deliver schemes of work, including the choice of appropriate teaching and learning methods to meet the needs of the subject, and of different students.
• Keep abreast of current developments in Design & Technology education and to adapt the curriculum content and methods of teaching and examining as appropriate.
• Identifying appropriate resources within the limits of the school budget.
• Ensure health and safety policies are followed within the Design & Technology workshop.
• Ensure that the Design & Technology workshop presents a stimulating environment, which help to influence students’ attitudes positively towards the subject.
• Ensure students’ work is regularly assessed and that homework is in line with school policy.
• Report to parents in accordance with the school’s reporting policy.
• Use information gained from assessment, recording and reporting procedures to generate further improvement in student achievement.
• When required, take on a form tutor role in the Senior School and fulfill the responsibilities of that position.
• Follow the School’s policies and procedures with regard to discipline and behaviour, daily routines, duties, homework, leave of absence and visits.
• Contribute to co-curricular activities that broaden students’ experiences and contribute to the general life of the school.
• Promote the study of Design & Technology amongst students and parents.
• Attend and contribute to meetings of a professional nature.
• Maintain appropriate links with teaching colleagues in all sections of the school and foster cross-curricular links where appropriate.
• Liaise with members of the Inclusive Education Team with regard to individual students, to ensure that those needs are understood, planned for and met.
• Develop effective links with the wider community, in order to extend the study of Design & Technology and enhance teaching and learning.

QUALIFICATIONS

• At least 2 – 5 years relevant professional teaching experience in education;
• The candidate should hold a minimum of a Bachelor Degree in Design and Techonlogy or Education or equivalent, which is obtained from a recognised University or College involving not less than 3 years full time study;
• Teachers Certificates, Diplomas or other Teacher Accreditation courses and certification are required if the applicant’s degree is not in Education;
• IB PYP course and training are highly valued;
• Knowledge of or willingness to acquire knowledge of inquiry based learning is required;
• Applicants must provide original copies of their Certificates and academic transcripts for authentication;
• International experience, especially in Asia is highly regarded.

Civil Engineer (Steel/Facade/Architectural Finishes Design)

Responsibilities:

• Responsible for the execution of civil and structural design involving the preparation of calculations, drawings and detailing.
• Coordinate with client and consultant for steel structure detailed design, shop drawing, authority submission and installation schedule.
• Support the team to design for steel structure support system.
• Involve in project planning, implementation and close monitoring of projects
• Project coordination including submission to local authorities and liaison during the construction stage.
• Any other task as designated by the management

Requirements:

• Relevant Degree recognized by Professional Engineers Board (PEB)
• Min 4 years of working experience in construction & structural steel industry
• Able to understand and prepare cutting plan, structure design and outfitting.
• Ability to work independently in a fast-paced environment.
• Effective communication and good interpersonal skills.

Interested applicants please submit your resume to [email protected]

• SGD 4,000 – SGD 8,000 + Variable bonuses
• Consultancy handles projects in government agencies, industrial, commercial & residential granting a competitive advantage
• Excellent career progression + Equal opportunities for advancement
• Attractive employee welfare benefit
• Location: Bugis area | Mon – Fri

Responsibilities

• Undertake design development and detailed designs.
• Attend site/ project meetings with clients, consultants and contractors.
• Familiar with engineering software and the latest code of practice.
• Senior hire would require to plan, coordinate, manages and supervises the civil & structural project.

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Working experience in a Civil & Structural consultancy firm.

Applicants are encouraged to include the following in their resume:

1. Expected salary
2. Notice period
3. Past project details – what kind of construction/building, etc

We regret to inform that only shortlisted candidate will be contacted.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Summary:

We are seeking an experienced Design Verification Manager to lead our team in verifying complex System-on-Chip (SoC) designs. The ideal candidate will have expertise in IP verification, ARM architecture, and SoC design, as well as experience with UVM, AMBA, and SystemVerilog.

Key Responsibilities:

• Develop and execute comprehensive test plans for SoC IP blocks, including module-level and SoC-level verification
• Design and implement ASIC verification structures using UVM, including stimulus, checkers, assertions, monitors, and scoreboards
• Lead a team of design verification engineers to achieve project goals and deliver high-quality results
• Collaborate with other teams, including design, implementation, and validation, to ensure seamless integration and effective communication
• Develop and maintain documentation for test plans, verification methodologies, and IP blocks

Requirements:

• Bachelor's or Master's degree in Electrical Engineering, Computer Science, or related field
• At least 10 years of experience in design verification, with a focus on SoC IP verification and ARM architecture
• Proven expertise in UVM, AMBA, and SystemVerilog
• Strong knowledge of SoC design principles, including IP block integration and system-level verification
• Experience with test plan development, execution, and analysis
• Familiarity with EDA tools and development flows for ASIC verification
• Excellent communication, analytical, and documentation skills
• Experience with Ethernet L2/L3 switch/router, high-speed IO (USB-2/3/4, PCIe gen2/3/4/5, MIPI CSI-2/DSI-2 and SATA), Flash controller, or CPU peripherals

Technical Skills:

• UVM (Universal Verification Methodology)
• AMBA (Advanced Microcontroller Bus Architecture)
• SoC (System-on-Chip) design principles
• IP verification methodologies
• ARM architecture
• SystemVerilog programming language
• C programming language
• Python scripting language (nice to have)

Leadership Skills:

• Experience leading teams of design verification engineers
• Strong project management skills, including planning, execution, and delivery
• Excellent communication and interpersonal skills
• Able to manage multiple sites

Qualifications & Requirements

· Min 3 years of experience in automation operations with product design skills

· Able to manage existing Automation systems and improvements for new systems

· Strong in computer aided design, or CAD.

· Expertise in 2D/3D modeling and rendering.

· Knowledge of materials, manufacturing processes, and design for manufacturing (DFM).

· Excellent attention to detail and ability to manage multiple projects simultaneously.

· Able to demonstrate innovative past product designs through a portfolio or simple case studies

· Comfortable in structural analysis, or FEA

· Strong problem-solving and analytical skills.

Responsibilities :

· Operate, monitor, and maintain automated systems and machinery to ensure efficient production processes.

· Perform troubleshooting, repairs, and adjustments to automation equipment to minimize downtime.

· Optimize automation workflows to improve production speed, accuracy, and consistency.

· Collaborate with engineering teams to implement system upgrades and new automation technologies.

· Conduct regular inspections and preventive maintenance of automated systems to ensure optimal performance.

· Work closely with production, engineering, and marketing teams to align automation and product design goals.

· Document processes, designs, and system configurations for future reference.

· Provide training and guidance to team members on automation tools and product design methodologies.

Working Hours: Monday-Friday, 9.00 am - 6.00 pm

Working Location: Novelty Techpoint, Singapore 536212 (Bartley)

Salary: $2500 - $3000 + Commission

Requirements

• Professional Certificate/Diploma/BS/BA or a related field of study
• 3-4 years of experience in account management, preferably in interior design / creative-led industry
• Must be able to read and edit autoCAD, SketchUp and other design softwares and site work is required.

Responsibilities

• Assist Project Director to manage the accounts of creative-led projects.
• Acting as the primary point of contact for clients, ensuring that their needs are met and their questions are answered in a timely manner
• Developing project plans and timelines, and ensuring that all project milestones are met on time and on budget
• Coordinating with other departments, such as design and production, to ensure that all project elements are delivered on time and to the client's satisfaction
• Preparing and presenting project status reports to the client and internal stakeholders
• Identifying opportunities for upselling and cross-selling to existing clients
• Ensuring that all project documentation is accurate and up-to-date
• Conducting research on the latest industry trends and best practices to ensure that our company remains competitive and innovative

Low Jia Yi R22104302

The Supreme HR Advisory Pte Ltd 14C7279

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

· Design and coordinate assigned Civil and Structural projects

· Perform structural analysis and design in building or on any structures as required by the project

· Liaise with clients & consultants to meet C&S requirements.

· Coordinate to ensure civil and structural requirements meet project tender, submission and construction schedule

Requirements:

· Good degree in Civil and Structural Engineering from a recognized University

· Minimum 1-2 year working experience in Civil & Structural consultancy firm

· Conversant with structural programs such as STAAD, TEKLA, ETABS, RAPT would be advantages

· Ability to work independently

· Candidate without the relevant working experience but with good academic results may be considered

Duties & Responsibilities:

• Responsible for the formulation of schedules and datelines for design and date of submission.
• Check detailed design and drawings based on relevant codes and client specifications, while ensuring the most cost-efficient methods of design are used.
• Liaise and co-ordinate with Project Department to obtain relevant information for detailed design.
• Determine the conditions and study all pertaining data thoroughly and accurately for a design. Many different combinations of loadings are possible and the most probable combination of simultaneous load for an economical and safe design is selected.
• Control and issue all technical documents.
• Any ad hoc project assigned by Design Manager.

Min Qualifications / Experience:

• Bachelor’s degree in mechanical engineering with minimum 3 years relevant experience

Job Skills Required:

• Mechanical design of pressure vessels, heat exchangers & atmospheric storage tanks. Thermal design of heat exchangers is also a required skill.
• Familiar with international design codes such as ASME, British, Australian & European Codes, Tema, API650 & etc.
• Proficient in design software such as PVELite, NozzlePro, StaadPro & Autocad.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected]or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Lee Jia Chian (Jayleen)
EA Personnel Reg No: R24124361

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655

EA Reg No: R1109557 Rose

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Design Coordinator cum Drafter

Responsibilities

· Assist designers with project coordination, research and data collection

· Managing design files, documents, and archives

· Creating and editing design materials such as presentations, reports, and graphics

· Conducting research and gathering inspiration for design projects

· Assisting with design concept development and brainstorming

· Ensuring design consistency and quality across projects

· Responsible for general drafting work including the detailing of structural, architectural and other related drawings

· Ensure drawing and proposal drawings are in accordance with specifications

· Prepare all coordination drawings, detail, 2D & 3D shop drawings and as-built drawings etc

· Coordinate and assist Project teams in all on-site technical/engineering matters

Requirements

· Recognized Degree in Architecture or equivalent

· Well versed in BIM

· Good knowledge of AutoCad 2D/3D

· Good communication (both oral/written) as well as presentation skills

. Minimum 2 years’ work experience in construction & design trade in Singapore

• Analysis of project requirements and propose the solutions accordingly.

• Development of system technical specifications.

• Development of system architectures and integration with 3rd parties' systems.

• Technical interface with customers and other contractors.

• Realization of testing and commissioning works onsite.

• Network troubleshooting for wired and wireless systems both.

• Technical support to systems once into operation after commissioning.

• Onsite testing and commissioning.

Requirements:

•Tertiary qualification in Electrical and Electronics Engineering

•Minimum 6 years experience working on various communication systems technologies such as fibre-optic transmissions, digital trunked radio, public address and telephony, CCTV surveillance, access management and travel information systems.

•Experience in implementing railway-related projects.

Degree or diploma in Civil Engineering or project management.

Please email your CV to: [email protected]

Our business:

Professional Engineer (PE Civil)

1. PE endorsement for any temp works

2. PE endorsement for wall hacking, submission to HDB/MCST;

3. Building structure crack/safety assessment

4. Scaffolding/shoring/formwork design

5. ECM design and submission to PUB / QECP inspection to site

6. A&A work design and submission to URA/BCA/HDB/LTA/JTC

7. SCDF submission for shop / factory partition works

8. LTA prompt submission for road opening;

9. PUB POWS submission

10. PUB Form B1 endorsement for sewer connection

11. SCDF FSC02 form endorsement.

12. HDB SED 054M form endorsement.

13. Project management

14. Design for Safety (DfSP) Services

15. Building structural inspection (PSI) to BCA requirements

16. Façade inspection to BCA requirements

17. Earth returning structure design and submission (ERSS)

M & E Work (PE Mechanical)

18. Design and PE endorsement to piping / ducting support

19. Design and PE endorsement to piping trenching excavation work

20. Endorsement to FSC02 form

21. Mechanical PE work

Geotechnical Consultancy

22. Deep Excavation

23. Slope Protection

24. Soil Improvement

25. Foundation Design

26. Soil Interpretation Report

Others

27. Land Survey

28. Pre-con survey

29. Technical clearance to Npark, PUB, LTA, JTC etc.

30. Traffic diversion design, LTA prompt submission

31. Design for Safety Professional (DfSP)

Responsibilities:

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves.
• Produce detailed engineering drawings
• Perform design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc.

Requirements:

• Degree in Mechanical or Mechatronics Engineering
• More than 5 years of experience in semiconductor equipment design
• Good knowledge and experience in the following areas :

1. Design of automation or semiconductor equipment
2. High precision machine design
3. Design of High Speed Pick and Place mechanisms

• Familiar with 3D CAD software
• Ability to plan, prioritize, and coordinate throughout the project cycle
• Ability to work independently with high level of motivation and communicate with all levels
• Equipment troubleshooting skills
• Ability to produce detailed Mechanical drawings and apply knowledge of
• Geometric Dimensioning & Tolerancing.