As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities
• Install equipment and/or CIP hardware for evaluation by the process development team to enable early introduction, maturity, and adoption for current and next node of 3D NAND technology.
• Work with the Fab layout and facility team to ensure smooth and on time installation and operation of the equipment.
• Work with process development team to quantify benefits of equipment/CIP hardware.
• Develop and optimize existing equipment hardware to meet the productivity requirements of advanced 3D NAND parts.
• Participate with Boise TD equipment development peers on technology choices for the upcoming nodes and able to translate future technology needs into clear equipment requirements.
• Identify disruptive equipment early, work with manufacturing and Boise TD to identify viable evaluation path forward in manufacturing.
• Design and implement advanced equipment monitoring and control methodologies.
• Lead team or sites or suppliers on complex projects in focused meetings with end goal of maturity an equipment technology in record times for technical advantage, cost and productivity.
• Serve as a technical expert within Micron, provide advice and recommendations to senior management on improvements from equipment development. Lead and initiate innovation projects through patents/technical papers.
• Identify and resolve safety hazards; follow safety procedures including lockout, chemical safety, lifting techniques and ergonomically correct methods.

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

Job Title: R&D Engineer - Electrolyte (Battery Material Research Division)

Location: NTU-Durapower Advance Lithium Battery Joint Lab #02-01, 1 Cleantech Loop, Singapore 637141

Overview:

We are seeking dedicated R&D Engineers specializing in electrolyte development to join our dynamic Battery Material Research Division. This role focuses on advancing high silicon-based projects, optimizing electrolytes for high-voltage, high-power, and high-safety applications, particularly in the realm of solid-state battery technology.

Key Responsibilities:

· Electrolyte Formulation: Lead and contribute to the development and optimization of electrolyte formulations tailored for high silicon-based battery projects, emphasizing enhanced performance, safety, and stability.

· Integration of Silicon Anodes: Collaborate within multidisciplinary teams to effectively integrate high-capacity silicon anodes into battery systems, addressing challenges related to volume expansion, cycling stability, and interface engineering.

· Experimental Design and Analysis: Design and execute experiments using coin and pouch cell configurations to evaluate and iterate on electrolyte performance. Analyze data to inform the enhancement of battery characteristics.

· Collaborative Research Initiatives: Work closely with cross-functional teams, including materials scientists, physicists, and mechanical engineers, to drive innovation in battery technology. Contribute actively to the advancement of solid-state battery research.

· Documentation and Reporting: Maintain meticulous records of experimental procedures, results, and analysis. Prepare technical reports and presentations contributing to scientific publications or patents.

Requirements:

· Bachelor's degree or higher in Material Science, Physics, Mechanical Engineering, or related fields.

· Proficiency in electrolyte chemistry and its significance in battery performance.

· Strong grasp of battery materials, with a focus on high silicon-based projects.

· Prior experience or demonstrable skills in experimental design and hands-on work with coin or pouch cell fabrication and testing.

Preferred Skills:

· Prior exposure in Project & R&D laboratory setting

· Experience or exposure to solid-state battery technology and solid electrolytes.

· Familiarity with software tools for data analysis and simulation in battery research.

· Any prior experience in industrial R&D, especially in battery or energy storage-related projects, would be advantageous.

· Knowledge or exposure to characterization techniques (e.g., impedance spectroscopy, SEM, TEM, X-ray techniques) is advantageous but not mandatory.

This role offers an exciting opportunity to contribute to cutting-edge research in battery materials, particularly in harnessing the potential of high silicon-based projects and advancing the development of next-generation solid-state batteries. Join us in shaping the future of energy storage technology!

Maintenance Engineer | Up to $4k | 5 Days | Tuas

Location: Tuas Avenue 6
Working Days: 5 days (Mon-Fri)
Working hours : 7:30am to 5:15pm
Salary Range: $3k - 4k

Job Responsibilities

• Monitor the machines and company equipments operational performance and condition
• Conduct preventive maintenance to machine and company equipments as per schedule
• Review and update all existing machine maintenance documents
• Prepare and design the spare parts for machines and company equipments
• Report any unsafe conditions and practices to Production Manager
• Assist of production and purchasing department of manufacturing / purchasing spare parts
• Monitor spare parts stock level and raising purchase order
• Managing, delegating and training the maintenance group
• Involve in the implementation and continuous maintenance of HSE Management System
• Perform any other duties assigned by the Production Manager

Accountable

• Meeting department quality objectives
• Ensure maximized machine uptime
• Ensure planned preventive maintenance is carried out effectively to minimize machine down time
• Ensure sustainable continuous improvement initiatives are carried out on machine, equipment and facilities

Job Requirements

Skill Requirements

• Knowledge of precision machining machineries, equipment and facilities
• Knowledge of repair and maintenance on machineries and equipment
• Knowledge of Environment, Health & Safety

Education, Experience & Training

• Diploma in Mechanical/Electrical or Mechatronic Engineering
• 5 years experiences in machine repair and maintenance

Training Requirements

• Quality Management and its related Quality Procedures

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

• Salary : SGD4,000 - SGD 5,000 + Commission
• Working hours: Monday - Friday 830am to 6pm
  (once a month half Saturday 9am to 12pm)
• Location: Woodlands

Job Responsibilities

• Develop close working relationship with customers championing products.
• Identify niche market segments locally, create market awareness, new product positioning and launch, develop and implement effective marketing programs with the timely support to penetrate, expand and accelerate business growth.
• Understand market trends, competitions, local market culture/customer expectations in order to achieve the organizations’ goals.
• Liaise with management and on various matters – develop jointly common marketing goals/strategies, share marketing information, obtain courses information

Job requirements

• With relevant experience, preferable with Semiconductor industry
• Cert /Nitec / Diploma in engineering background
• Possess own transportation is an added advantage

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

Responsibilities

· Responsible for installation, commissioning, maintenance, and repair of current installed base of XRD & XRF for APAC.

· Troubleshoot, diagnose customer problems, and coordinates appropriate corrective action directly.

· Conform always to Malvern Panalytical and customer’s safety, cleanliness, and working protocol policies to maintain a safe and clean work environment.

· Ensure that guidelines and standards of work expected by Malvern Panalytical are understood and met.

· Carry out preventative maintenance activities to installed base as per factory guidelines.

· Provide Service Support and basic training after installation.

· General Service administration activities and report submission.

· Responsible for proper spare part handling per internal procedures.

Requirements

· Diploma Electrical Engineering & Mechanical Engineering, Physics, or related education. Knowledge of Chemical Engineering, Chemistry, Chemical, Electronics, Mechanics preferred.

· 2~3 of experience in maintaining analytical instruments or semiconductor equipment is preferred.

· Able to travel both domestically and internationally on short notice.

To find out more about this opportunity, please contact Lionel Liew at [email protected].

We regret that only shortlisted candidates will be notified.

GMP Technologies (S) Pte Ltd | EA Licence: 11C3793 | EA Personnel: Lionel Liew | Registration No: R1330693

Job Description:

• On behalf of the Owner’s Engineer (OE), the T&C Lead Engineer shall support the T&C Manager for overseeing all testing and commissioning activities of the IWMF Contractors, including the coordination of testing and commissioning activities of TWRP that interface with IWMF.
• The T&C Lead Engineer shall support the T&C Manager to lead the OE’s proposed testing and commissioning team and coordinate with its Resident Site Supervision (RSS) Team and OE’s design team as well as the Contractors to review the development of the Contractors testing and commissioning plan and the Contractors execution of their plan in order to achieve the Project milestones for each of the IWMF EPC Contracts (EPC Package 1 – Waste to Energy/Materials Recovery Facility and EPC Package 2 – Sludge Incineration Facility/Food Waste Treatment Facility).
• The T&C Lead Engineer shall support the T&C Manager to oversee the whole of each Contractors testing and commissioning activities, and the interfaces between EPC1 and EPC2 and TWRP as relevant, which should commence from dry/cold to hot commissioning to successful completion of entire commissioning process and trial run, including optimisation of plant operation with the Contractors and O&M teams.
• Participate as required by the T&C Manager in regular T&C Coordination Meetings with the Contractor and/or Other Contractors on adjacent sites (that is attended by Client representatives or similar others also)
• Any other matters that may from time to time be delegated by the T&C Manager.
• The OE’s T&C Lead Engineers are estimated to be mobilised to site at least 6 months prior to the commencement of actual testing and commissioning by the Contractor in order to familiarise themselves with the Works and the Contractors plans for the T&C and the expectations of the Client.

Job Requirements:

• The T&C Lead Engineers shall have at least 5 years of hands-on relevant experience in testing and commissioning (and operation) of large scale solid waste management projects (Waste to Energy - WTE, sludge incineration, materials recovery and food waste treatment), or experience with large scale industrial/process/utilities projects (i.e. waste, water, oil & gas, power) testing and commissioning.
• The T&C Lead Engineer to have a relevant engineering degree or certification.

Key Responsibilities:

• Manage and maintain network infrastructure, ensuring optimal performance and reliability for the organizations network systems.
• Configure, monitor, and troubleshoot networking issues, including routing, switching, firewall setups, and network security.
• Implement network solutions and upgrades, focusing on maintaining seamless connectivity and ensuring minimal downtime.
• Provide support and troubleshooting for Cisco-based systems, while also demonstrating expertise in other network solutions as required.
• Collaborate with cross-functional teams to optimize network performance, security, and scalability.
• Conduct regular network assessments to identify potential issues, recommend solutions, and ensure compliance with industry standards.

Requirements:

• Diploma/Degree in Computer Science, Engineering, or related field.
• At least 2-3 years of experience in network engineering, with a strong background in networking principles and practices.
• Experience with Cisco products is highly preferred; however, candidates with strong experience in other network products will also be considered.
• Solid understanding of network protocols, security standards, and best practices for network performance optimization.

Tyson Jay Management Pte Ltd | EA License No.: 24C2479

Ivan Lim | EA Personnel No.: R1109856

Salary: $3,400 - $3,800

Location: Ang Mo Kio/Yio Chu Kang

Key Responsibilities:

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects and contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Key Requirement:

• Graduate in Electrical/Mechanical Engineering.
• Advanced skills using company software
• 3 - 5 years experienced
• Experienced in ACMV & LTA/SMRT
• Soft skills including a positive attitude, flexibility and conflict resolution

WhatsApp me wa.me/6585125305 for a prompt response to your enquiry!

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please by notified that only shortlisted candidates will be informed.

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Our client is a well-established MNC, market leader in the IT industry. Due to their current expansion plan, they are looking for an Information Security Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Handle post-sales activities of related products and solutions.
• Engage in the implementation of large-scale projects.
• Offer on-site services, including deployment, testing and preparation of documentation.
• Provide technical assistance to maintain high levels of customer satisfaction.
• Troubleshoot customer inquiries by leveraging existing knowledgebase resources and resolving known issues.
• Be available for standby support to manage 24/7 maintenance calls.
• All other adhoc duties as assigned.

Requirements:

• Minimum diploma in IT / Cybersecurity or other related field of studies.
• Minimum 2 years’ IT support experience.
• Certified CCNA or CCSA is a bonus.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Summary

You will be working with our client who specialises in the healthcare and technology space. Our client is seeking a skilled Test Engineer with hands-on experience in Microsoft Dynamics CRM 365. The ideal candidate will have a strong background in testing enterprise applications, particularly Dynamics CRM, and ensuring the quality and functionality of business-critical system. The role requires an individual with a thorough understanding of testing methodologies and best practices.

Responsibilities

• Analyse business requirements and translate them into detailed test cases for Microsoft Dynamics CRM 365 applications.
• Create, review, and maintain comprehensive test plans, test scenarios, and test cases based on functional and non-functional requirements
• Execute test cases manually, including functional, integration, and regression testing for Microsoft Dynamics CRM modules.
• Identify, document, and track defects/issues found during testing in defect management tools like Jira, Azure DevOps, etc.
• Work in close coordination with business analysts, developers, and stakeholders to understand the functionality of CRM modules and ensure proper testing coverage.

Requirements

• Bachelors degree in Computer Science or equivalent
• At least 4 years of experience in manual testing, with at least 2-3 years focused on Microsoft Dynamics CRM 365
• Strong knowledge of Dynamics CRM functionality, including sales, marketing, service, and custom modules.
• Familiarity with SQL and the ability to query databases to validate data within CRM systems.
• Understanding of software development life cycles (SDLC) and testing methodologies (Waterfall, Agile).
• Experience with end-to-end testing of complex business applications and integrations
• Able to conduct Test Readiness Review (TRR) to ensure readiness of the test phase.
• Experience in API testing using postman.
• Basic knowledge of automated testing tools and scripting is an advantage.
• Experience in testing integrations with other Microsoft technologies (e.g., Power Platform).
• Experience in UAT coordination and user training.

If you are interested in this role and would like to discuss the opportunity further please click apply now or email Chew Kai-Xinn at [email protected] for more information.Only shortlisted candidates will be responded to, therefore if you do not receive a reply within 14 days please accept this as notification that you have not been shortlisted.Morgan McKinley Talent SolutionsMorgan McKinley Pte Ltd EA Licence No: 11C5502EAP Registration No: R2196712EAP Name: Chew Kai-Xinn

• Well Established Company
• Basic $5500 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 3 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

5 days Mondays to Fridays: 8:30am to 6pm
$6500 – $8500
Pandan Road Singapore (Clementi)

Transport: We have company bus departing near Clementi MRT station at 8.10am to bring staff to our office and also a return company bus trip back to Clementi in the evening.

Responsibilities:

• Report to the Project Director / Manager in charge of the WTW system.
• Project Support: Provide technical expertise to oversee the design, development and construction of the WTW system.
• Interface with WTW system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Project Execution: Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Troubleshooting and Repair: Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Record Keeping: Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the WTW system.

Requirements:

• Min Degree in Mechatronic or equivalent
• Min 5 years working experience in Marine Industry or shipyard environment.
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations.
• Added advantage with specific experience in WTW system (Offshore Passenger Transfer System).
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting.
• Software – able to use MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD. Ability to use Primavera scheduling software an added advantage.
• Good understanding of Document Control. Added advantage with knowledge of ISO9001:2015 QAM system

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Project Engineer

Working Days: Monday - Saturday

Working Timing: 0830am - 530pm

Office Location: Kranji - Sungai Kadut

Salary range: $3500-$4500

Responsibilities

Project Management

• To resolve all technical and non-technical issues during the project lifecycle.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Minimize material wastage on-site and maximize machinery/equipment usage.
• To control the allocated direct workforce effectively ie. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Achieve targeted progress of works to ensure the intended cash flow.

Technical Understanding

• Fully understand project drawings and scope of work.
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage.
• Candidate with comparable qualification may be considered for Project Manager post.

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Jobscope

• Install and configure gas detection systems at customer sites.
• Assess and determine the best locations for sensors.
• Regularly maintain and calibrate gas detection equipment to ensure accuracy.
• Perform preventive maintenance to avoid equipment breakdowns.
• Diagnose and fix issues with gas detection systems, including hardware and sensor problems.
• Repair or replace faulty components.
• Provide on-site and remote support to customers for system issues.
• Train customers on the correct use and maintenance of equipment.
• Other ad hoc duties assigned by supervisor

Requirements

• Min. Diploma in Electrical/ Electronic/ Process Instrumentation / Mechatronics Engineering
• Experience in oil & gas or process industries as training will be provided
• Min 3 years’ experience in service/engineering position in Oil & Gas / Process industry.
• Knowledge in Electrical & instrumentation is preferred
• Work experience in Process Instrumentation is a plus
• Possess a valid class 3 license

Interested candidates, do submit your resume to [email protected] or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]@recruitexpress.com.sg

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Our client is an American multinational corporation that specializes in the production of memory and storage solutions. They are one of the largest global producers of semiconductor products where the products are used in a wide range of applications, including personal computers, smartphones, tablets, servers, automotive systems, and various other electronic devices.

Job Requirements:

● Project Supervision: Supervise & Coordinate with consultants, contractors, and subcontractors, ensuring tasks are completed on time.
● Scheduling: Monitor project schedules, resolve issues, and adjust timelines as needed.
● Drawings & Design: Guide drafters in creating detailed mechanical and piping installation plans
● Procurement & Tendering: Assist Project Manager / Procurement team in preparing tender documents, procurement specifications, and sourcing materials.
● Reporting: Prepare regular project status reports and attend meetings to provide updates / trends.
● Vendor Coordination: Manage vendors during equipment commissioning and testing.
● Budgeting: Assist in preparing project budgets (CAPEX) and cost estimations & allocation.
● Safety Compliance:
- Ensure safety protocols are followed, issue work permits, and conduct toolbox meetings. - Maintains site safe condition and clean working environment by enforcing internal procedures, rules, and regulations. - Maintains product and company reputation by complying with state and company policy and regulations.

Requirements:

● Graduate of Bachelor's degree / Diploma in Mechanical or equivalent engineering education.
● Physically fit to work at a construction site as project engineer.
● At least 2 to 5 yrs experience working on site installation coordination and project supervision in following areas:
1. Working at process/equipment construction site, plant installation, EPC, or equivalent.
2. Providing inputs in technical design and technical document preparation.
3. Piping installation, Equipment installation, pipe routing.
4. Ability to read, understand & demonstrate the P&ID and PFD drawings to site work.
5. Proficient to read and understand engineering plan drawings like piping and pipe support plan, equipment layout mechanical installation plan.
6. Able to understand Fire Fighting and Alarm systems.
7. Proficient with Microsoft office application and Microsoft project or equivalent and familiar with Google doc
8. Familiar with Singapore and international codes /Regulations related piping, construction

Able to work independently and less supervision required. Salary commensurate with experience.

Please note that this is a 1 year renewable contract. Company is located at Woodlands. Singaporeans Only.

Next Step:

If you would like to explore further, please submit your updated resume to [email protected]. Shortlisted candidates will be contacted.

Kaelyn Koh Cu Yan
Direct Line: +65 6697 7875
EA License No: 91C2918
Personnel Registration Number: R22107353

• 5 days, North, MNC
• $3800 - $4000, performance bonus
• New position, start immediately

Responsibilities:

• Oversee and manage VMware and other vCenter environments to ensure optimal performance and reliability.
• Configure and maintain Meraki switches and access points, as well as Fortigate firewalls, ensuring network security and efficiency.
• Administer Windows servers, including MS-SQL and IIS servers to support development projects and assist with creating queries and reports.
• Support and maintain Windows workstations and laptops, troubleshooting and resolving issues as needed.
• Implement and manage backup/recovery solutions, along with comprehensive disaster recovery plans to safeguard data and operations.
• Collaborate with HQ to align with corporate IT standards, including maintaining and updating ISO documentation as required.

Requirements:

• Possess a Diploma/Degree in Computer Engineering, Information technology, Computer Science or equivalent.
• Minimum 1 year of experience in IT infrastructure management
• Able to start within short notice is an advantage
• Strong knowledge of VMware and vCenter environments.
• Proficient in SQL and IIS server management.
• Hands-on experience with Windows servers and workstations.
• Familiar with Meraki and Fortigate products.
• Experience in office 365 installation and configuration.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• MNC, 5 days, North
• $4000 - $4800, performance bonus
• Career advancement

Job scope:

• Operate and maintain advanced probe card analyzers and QA equipment, ensuring compliance with operational standards and functionality benchmarks.
• Prepare, debug, and validate test files for probe card certification, ensuring alignment with precise technical specifications and quality criteria.
• Conduct in-depth investigations and resolve probe card related issues,employing a methodical approach to diagnose root cause and implement corrective measures.
• Engage proactively with relevant departments to maintain QA readiness for all certification processes, ensuring seamless coordination on quality-related challenges.
• Serve as a liaison with headquarters and customers on new certification processes, offering technicial updates and managing expectations effectively.
• Contribute to the continuous improvement of QA processes, leveraging industry insights to enhance operational efficiency and quality outcomes.
• Take on supplementary duties as required, supporting the team in achieving project goals.

Requirements:

• Minimum a Diploma/Degree in Electronics, Mechanical Engineering or equivalent.
• Knowledge in wafer testing or probe card is an advantage
• Good communication and written skills
• Able to start within short notice will be an advantage

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• Well Established Company
• Basic $4000 - $5000 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: North
• Working days: Monday to Friday
• Working hours: 8am – 5pm

Job Responsibilities:

• Handle trouble shooting on products on site and identify any leaking or faulty installation of the components
• Perform visual and functional checks on the products on site
• Provide site supervision on contractors for proper installation of the products.
• Communicate with workers on site and supervise their tasks
• Present on improvement plans that generate pull through of product sales
• Work closely with Sales to promote on-site services contracts
• Provide both technical and market insight support to sales department for Oil & Gas market and mechanical packages
• Any other ad-hoc duties as assigned

Job Requirements:

• Possess minimum Bachelor’s degree in Instrument / Mechanical engineering or strong science/technical discipline with at least 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

• Position title : Sales Engineer
• Location: Loyang Way, Loyang Industrial Estate
• Working Days: Mon - Fri
• Working hours : 830 a.m. to 530p.m.
• Salary : $3,000 - $4,500 (depends experience)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up-to-date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in Engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

Our client is an US MNC, one of the largest players in the life-science sector. Due to business needs, they are now recruiting for Field Service Engineer to be part of their team for ongoing transformation projects. They are located at Jurong East.

Job Requirement:

• Perform verification, calibration, and preventive maintenance (PMs) in accordance with in-house Metrology SOPs.
• Maintain calibration and qualification tools, ensuring timely upkeep.
• Coordinate with and oversee External Third-Party (3P) vendors for calibration, PMs, qualifications, and repairs.
• Ensure External 3P vendors meet Customer off-site and on-site qualifications prior to service execution.
• Respond promptly to ad-hoc service requests from Laboratory End Users, adhering to the agreed Service Level Agreement (SLA).
• Recommend appropriate inventory levels for critical equipment parts and tools to minimize downtime and aid budget planning.
• Accurately document and manage service records, training, and asset information in the in-house Asset Management system.
• Facilitate clear communication and coordination among customers, vendors, and internal teams to ensure smooth service delivery.

Qualifications and Criteria:

• Diploma or bachelor’s degree in Science or Engineering, ideally in Electrical or Mechanical Engineering.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Ptd Ltd

EA License No: 19C9682
Reg No: R24122162 | LAI CHAI LI

• Well Established Company
• Basic $5500 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 3 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Mechanical Engineer

• Working hours: 5-days (Mon to Fri) / 8 am to 4.30pm
• Location: Jurong (Company transport provided near Jurong
• East MRT)
• Salary Range: $4500 - $5500

Maintenance Engineer (Mechanical) reports to the Senior Technical
Manager and whose responsibilities include:
1. Oversee, manage, and supervise Company’s in-house and external
Contractors for all mechanical maintenance works related to planning
and execution of:
(a) daily maintenance [preventive, corrective, & breakdown
maintenance],
(b) transition maintenance,
(c) turnaround maintenance and
(d) upgrading and improvement related to maintenance
2. Ensure all mechanical maintenance activities are carried out in
accordance to the Company’s HSEQ Standards & Maintenance
Management System, statutory requirements and best industry practices.
3. Establish, continually improve & execute Company’s maintenance
management system in a safe, efficient, and effective way to achieve
highest equipment reliability & availability objective.
4. Update and maintain accurate maintenance records in order to
provide good maintenance history for data analysis and troubleshooting
purposes.
5. Conduct root cause analysis to eliminate equipment/ system defect
and take appropriate preventive/ corrective measures.
6. Optimize & manage mechanical maintenance inventory level of critical
& non-critical equipment spare parts.

Requirements:

• Degree in Bachelor of Mechanical Engineering
• Familiar with Static and Rotating equipment
• Minimum 3 years of experience in Chemical Process Plant.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628