Responsibilities:

• The Mixed-Signal IC (MEMS Interface) Design Engineer will be responsible for the design and development of capacitive and/or piezoelectric MEMS interface ASICs, including the required amplifiers, ADCs, filters and control logic, with characteristic high impedance inputs, ultra low power, low noise circuits etc .
• The responsibility of the Mixed-Signal IC Design Engineer includes scheduling, design, simulation and layout of mixed-signal circuit blocks, including pre- and post-silicon verification.
• It is also expected that you will conduct periodic design reviews, including with application engineers.
• It is also expected that you will support test development and product development teams in bringing projects to production.

Requirements:

• PhD/Master’s Degree in Electronics/Electrical Engineering.
• Minimum 6 years’ experience in Analog or Mixed-signal IC design.
• Very good knowledge of CMOS processes.
• Highly proficient in analog and mixed-signal IC design EDA tools.
• Experienced in analog and mixed-signal circuit designs, such as regulators, DC-DC converters, low-power, low-noise biasing circuits and amplifiers, sigma-delta modulation and ADCs, etc
• Experience in design of high resolution, low power sigma-delta modulation preferred.
• Experience in design of ultra low power ADC preferred.
• Skilled in laboratory testing of IC prototypes.
• Knowledge of Linux operating system required.
• Experience in MEMS interface ASIC design advantageous.

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Employer Background:
The employer is a prominent player in the precision engineering sector, specializing in the manufacturing of high-quality metal components. They are known for their advanced engineering capabilities and commitment to delivering tailored solutions to meet customer needs.

Overview:
Join a dedicated team as a Design Engineer, where you will contribute to the design and development of precision engineering solutions, focusing on automation systems and custom fixtures.

• Position: Design Engineer
• Industry: Precision Engineering
• Department: Design and Engineering
• Employment Type: Full-Time
• Working Days & Hours: 5 Days, Monday to Friday, 9:00 AM to 6:10 PM
• Work Location: Within Central Location at Macpherson
• Salary Range: Up to $4,500 Monthly Basic (Based on Relevant Experience)

Job Responsibilities:

• Create schematic diagrams and manufacturing drawings for automation systems and jigs & fixtures, utilizing AutoCAD and/or SolidWorks.
• Collaborate closely with engineers and coordinate with customers to ensure that manufacturing drawings meet specifications and requirements.
• Assist in the design and engineering process to enhance manufacturing efficiency and product quality.

Requirements:

• Experience: Minimum 1 year of relevant working experience, preferably in the manufacturing automation or jig & fixture industry. Entry-level candidates are welcome to apply; training will be provided.
• Education: Minimum educational qualification: Nitec / Higher Nitec / Diploma / Degree in Engineering (Any Major).

Recruit Lync Pte Ltd | EA License Number: 22C1000
Poon Weng Teik (Wilson) | EA Personnel License: R1657737

Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Structural Design Engineer (Iconic building projects, A1 main con)

Our client is a leading A1 main contractor with a notable record of mixed development, residential and commercial projects. They’re now looking for Senior/Structural Design Engineers/Technical Engineers/C&S Engineers for their building projects during an exciting time in their development.

Job Responsibilities

• Provide technical expertise in the design and coordination of the structural aspects of our construction projects.
• Work closely with project teams to ensure that all structural elements are designed to meet project specifications, regulations, and quality standards.
• Coordinate and liaise with relevant stakeholders to ensure the design complies with all requirement
• Prepare and present technical engineering reports, calculations, drawings, and specifications for project designs.
• Participate in the value engineering process to ensure cost-effective and efficient design solutions.

Requirements

• Degree/diploma in Civil/Structural Engineering, Construction Management, or related field
• Minimum 2 years of relevant experience, preferably with a main contractor
• Candidates with more experience can be considered for the senior position

Location: Central

Interested candidates kindly forward your CV to [email protected] (Tan Yi Ling, Reg No: R21103172). You may email this great opportunity to someone who would be a great fit for this role.

All information will be kept strictly confidential. We regret to inform that only successful applicants will be contacted.

PeopleSearch Pte Ltd

EA License No: 16S8057

Summary :

5.5 days / Alt Saturday

Site Engineer up to $6000

Senior Site Engineer up to $7000

Industry: Construction (Civil & Structural)

Industry: M&E Fire Protection

Job Scope:

1. Site Supervision: To Oversee daily construction activities to ensure they align with project plans and timelines.

2. Quality Assurance: Monitor workmanship and materials to ensure compliance with specifications and standards.

3. Coordination: Collaborate with project managers, subcontractors, and other stakeholders to facilitate smooth operations.

4. Technical Support: Provide on-site technical assistance and resolve any engineering-related issues that arise.

5. Site Inspections: Conduct regular inspections to assess progress and identify any potential problems early.

6. Documentation Management: Maintain accurate records of project progress, including daily reports, logs, and photographs.

7. Health and Safety Compliance: Ensure that all safety protocols are followed and promote a safe working environment.

8. Problem Solving: Identify issues and implement effective solutions to minimize disruptions.

9. Client Communication: Liaise with clients to update them on progress and address any concerns.

10. Budget Monitoring: Assist in tracking project expenses and resource allocation to stay within budget.

Job Requirements:

• Bachelor's Degree / Diploma in Civil Engineering / Mechanical Engineering / Electrical Engineering OR any equivalent is welcome to apply
• Strong communication, organizational skills, and a solid understanding of construction practices and regulations.
• Good to have experience with LTA project
• Entry level is welcome to apply as there's assistant engineer's vacant available & training is provided.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

• Well Established Company
• Basic $4000 - $5500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 5.30pm
• DCS | PLC | SCADA

Job Responsibilities:

• Understand / develop technical design specification / requirements and associated document relevant to project
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and System Commissioning on site
• Product test document and training material
• Conduct training to customer
• Provide technical support to sales and maintenance team
• Others ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent with 1-2 years of relevant experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Well Established Company
• Basic $4000 - $5500 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working Days: Monday to Friday
• Working hours: 8.30am to 6pm
• TRAINING PROVIDED

Job Responsibilities:

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS/DCS/PLC/SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management
• Others ad hoc duties as assigned

Job Requirements:

• Minimum Diploma or Degree in Mechanical / Mechatronic / Electrical Engineering or equivalent
• Knowledge on BMS / PLC / HVAC will be a plus point
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Optics are critical at KLA and at the core of our tools that are finding defects on wafers and reticles that aren’t visible with the human eye. We do this by using different light sources and nanophotonics to capture images. As an optical engineer at KLA, you’re responsible for developing ultra-high precision optical systems and component designs for complex systems, conducting key optical simulations, modeling and analysis as well as identifying manufacturing issues and developing solutions for these.

Responsibilities:

• Facilitate the optical specifications, lens design, and supplier integration of new optics enabled products for the Optics Development Engineering group.
• Effective use of Code V or Zemax to design low residual aberration generating imaging lenses, relays, spatial/polarization beamsplitters and zoom lenses both from nominal design process to final Monte Carlo tolerance analysis and error budgeting.
• Construct complex system models using above components having all imaging paths with critical parameters needed to produce accurate and efficient raytracing simulations of Strehl/WFE performance, coherent and incoherent PSF size/shape, focal depth of field and pupil, multiple bounce ghost and non-sequential stray light analysis, and polarization ray tracing to quantify transmission, retardance, diattenuation.

Education or experience should include:

• Designing, modeling and analyzing optical systems
• Optical manufacturing processes
• Code V or Zemax Optical software advanced user
• Statistical lens tolerancing
• Ghost and stray light analysis
• Design for manufacturing based on capabilities of Optical metrology
• Specification of precision opto-mechanical assemblies; and
  Data analysis using Matlab or other programs. Any suitable combination of education, training, or experience is acceptable.

Minimum Qualifications

• Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years

Our client is a leading construction company, specialize in marine engineering and land reclamation projects.

• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

KEY RESPONSIBILITIES

• Manage ecommerce platform with updated product listings, pricing and inventory.
• Design engaging design collaterals including poster, EDM and website banner.
• Manage and process online orders
• Support other ad-hoc duties

REQUIREMENTS

• Diploma in Design/Marketing/Communication or a related discipline
• Proficient in Adobe Photoshop and Adobe Illustrator

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Project Executive

Working Hours: Monday-Friday (9.00 am - 6.00 pm)

Working Location: New Industrial Rd [Bartley]

Salary: $2500-$3000

Requirements

• Professional Certificate/Diploma/BS/BA or a related field of study
• 1 -2 years of experience in account management, preferably in interior design / creative-led industry
• Must be able to read and edit autoCAD, SketchUp and other design softwares and site work is required.

Responsibilities

• Assist Project Director to manage the accounts of creative-led projects.
• Acting as the primary point of contact for clients, ensuring that their needs are met and their questions are answered in a timely manner
• Developing project plans and timelines, and ensuring that all project milestones are met on time and on budget
• Coordinating with other departments, such as design and production, to ensure that all project elements are delivered on time and to the client's satisfaction
• Preparing and presenting project status reports to the client and internal stakeholders
• Identifying opportunities for upselling and cross-selling to existing clients
• Ensuring that all project documentation is accurate and up-to-date
• Conducting research on the latest industry trends and best practices to ensure that our company remains competitive and innovative

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

• Position : ALL WELCOME - Technical Sales Engineer (NO EXP REQUIRED/TRAINING PROVIDED) - Up to $4500
• Location : West – Bukit Batok Crescent
• Working hours: Monday to Friday | 8.30am to 5.30pm
• Salary (commensurate with experience) : Up to Basic of $4,500 + Average Incentives of $1,000 + AWS + Variable Bonus + Transport Reimbursement/Allowance + Mobile Phone Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Automation

Main Responsibilities:

• Responsible for preparing quotations, proposal according to customer’s requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analysing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products..

Requirements:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/Mechanical
• No experience required/ Entry level candidates are welcome to apply
• Training on products will be provided
• Bilingual in English and Mandarin to communicate with colleagues who can only speak in mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Summary:

• Basic up to $3800
• AWS + Variable bonus
• Location: Buona Vista
• 5 days work week @ 8.45am - 5.30pm
• Fresh grad is welcomed to apply

Key Responsibilities:

• Utilise 3D CAD design tools and perform high precision 3D printing (FDM & DLP)
• Utilise basic microcontrollers boards such as Arduino, ESP32 or STM32 to build simple circuit boards
• Testing and assembly of electronics and mechanical parts and debugging of software
• Familiar with maintenance of laboratory inventory and laboratory administrative tasks (Preventive maintenance / safety matters)
• Administrative works, such as ordering and payment with SAP system
• Other relevant ad-hoc duties

Key Requirements:

• Min Nitec in bioengineering, biophysics, physics, mechatronics, electrical / mechanical engineering, computer engineering and etc
• Basic experience in 3D CAD design

Interested applicants, please submit your updated resume in MS Words / PDF format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to the collection, use, and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Please be informed that only shortlisted candidates will be notified.

Your recruiter for this job: Stella

WhatsApp me @ 8772 4117 for a prompt response to your enquiry!

Stella Aw Yong See Hui | R24121552

Recruit Now Singapore Pte Ltd | EA No: 21C0845

• Well Established Company
• Basic $5000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

Job Title: Software Engineer(Devices) - C++ & UML

Job Type: Contract - 2 Years

Job Location: East, Singapore

Job Responsibilities

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:

• Requirements gathering.
• Design and develop software applications for embedded devices.
• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual,Training Manual and others documents as required in the SDLC processes.
• Assist day-to-day application support issues.
• Liaise with users on the requirementtesting and production issues

Qualifications & Requirements:

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• Experience in multi-threading, socket programming and serial/USB communication.
• At least 5 years’ experience in object-oriented software development
• Prior experience in following areas Scrum AGILE methodology process is a plus
• Scrum AGILE methodology process
• Develop and integrate embedded devices with cloud platforms
• Strong analytical and problem-solving skills
• Good written and verbal communication skills
• Self-motivated, independent and a good team player.

This is an outsourced role.

If you are looking for an opportunity and your skills align with this job, please send your updated CV/resume (in Word format) to Mounika at [email protected].

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to RMA Groups’s PDPA and e2i’s PDPA.”

Mounika Tanuku

EA Regn. No. R22109193

EA Licence No. 93C4403

Roles & Responsibilities:

• Conduct repair, maintenance, or overhaul of marine diesel engines (2 & 4 stroke) under the guidance of Engineers/Technicians.
• Adhere to all requirements for jobs in shipyards or anchorages.
• Lift and shift heavy engine components to and from the workshop for repair/reconditioning.
• Ensure prompt response and effective communication with customers.
• Perform additional tasks as assigned by the Operation Manager.

Job Requirements:

• A diploma/degree in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.
• At least 2 years of experience in Engine Repair & Maintenance.
• Hands-on experience in troubleshooting, maintenance, and repair is an advantage.
• training will be provided.
• Willingness to work in a shipyard/anchorage environment.
• Ability to work overtime when necessary.

Salary: up to $5500

Duration: Immediate until end march 2025

Location: Kranji

Working Hours: 40h/wk - Both weekends (12h day shift, WFH) + 2 full weekdays (onsite, can choose)

Responsibilities:

• Respond to atypical production situations and emergencies, such as process outages, critical alarms, or equipment failures, diagnose issues and take immediate corrective actions or perform manual interventions together with Manufacturing supervisor/delegate, to restore normal operations and prevent any potential safety or quality incidents.

• Collaborate with the production team to ensure the stability of production processes and the execution of operations.

• Identify opportunities for operational improvements and implement optimization strategies.

• Assist and guide Standard Users with system-related queries and issues.

• Provide support to manufacturing operations outside of regular office hours. Attend to urgent requests and ensure timely resolution of issues.

• Will work holidays and overtime as required

• May be required to adjust work schedule to meet production demands

• Participate in manual intervention remediation projects. Identify, implement, and perform test execution for changes made to the system.

• Responsibility to adhere to any applicable EHS requirements.

• Commitment to a fair and respectful relationship to others and behavior in accordance with Takeda’s Code of Conduct.

• Any other duties as assigned by supervisor.

Requirements:

- Minimum Diploma in Applied chemistry/Chemical Engineering or related field

- Skilled in navigating and utilizing PCS7 systems.

- At least 2 years of GMP experience

Interested candidates, please submit your resume to: [email protected]

Ally Audrey Lok Xin Woon

Recruit Express Pte Ltd (Healthcare & Lifescience)

Company EA Licence number : 99C4599

Personnel EA License: R21102307

[email protected]

Job Descriptions

Maintaining and administering the networks environments including hardware, and configurations.
Performing disaster recovery operations and data backups when required.
Protecting data, software, and hardware by coordinating, planning and implementing network security measures.
Troubleshooting, diagnosing and resolving hardware, software, and network problems.
Replacing faulty network hardware components when required.
Monitoring network performance to determine if adjustments need to be made.
Coordinating computer network access and use.
Administer, and troubleshoot network infrastructure devices, including wireless access points, firewall, routers, switches, controllers.
Responding to inquiries from users, IT peers, vendors and to provide technical assistance and support.
Ensure control and compliance for the systems and servers related are available to only authorize users which follows policies and SOPs closely.
Attending audit meetings and ensure proper documentation of all work done.
Vendor management
Establish/maintains customer relationship with partners or internal users to ensure complete understanding of business processes to enable the delivery of viable Infrastructure solution.
Provide PABX support based on Client’s SOP and documentation
Attending to machine faults related to network problems during office and after office hours.
Job Requirements:

3-4 years of network
Network security
HPE network
Wifi knowledge (Aruba or Cisco)
Fortigate, Palo, or Cisco firewall experience
Megapop and SD-WAN knowledge
Work with vendors
Networking best practices
PABX knowledge (will be good)

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform that only shortlisted candidates will be notified.
By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd
• RCB No. 200007268E • EA License No. 01C4394
• Reg. <R21100074> <Cheryl Thng Wei Lin>

T&C Engineer/

Senior Commissioning Engineer

The T&C Engineer/Commissioning Engineer is responsible for managing all testing and documentation for the project, ensuring quality delivery, and coordinating handover to the client and internal service department.

Key Responsibilities:

• Project Management:Manage all testing processes and documentation for the project.
  Ensure quality delivery from project installations and coordinate handovers.
  
• Design Review:Review project designs to ensure operational feasibility.
  Verify and evaluate the quality and performance of equipment/systems according to specifications before delivery to the client.
  
• Early Project Involvement:Engage in the early stages of projects to understand construction and Testing & Commissioning (T&C) requirements.
  
• Compliance:Ensure compliance with standards and engineering practices throughout the project.
  Understand built plans (M&E), technical literature, and equipment manuals.
  
• Troubleshooting:Conduct equipment troubleshooting, root cause analysis, and propose solutions.
  
• Reporting:Report work issues and non-compliances to the Project Management Office (PMO).
  
• Testing Activities:Conduct Site Acceptance Tests (SAT), Integrated System Tests (IST), Testing and Commissioning (T&C), and User Acceptance Testing (UAT).
  Support the project team with any technical issues related to testing procedures.
  
• Coordination:Work closely with the engineering team to understand design specifications.
  Prepare T&C test sheets and documentation prior to inspections.
  Schedule and coordinate all T&C activities, including attending equipment SAT testing and submitting site inspection reports.
  Liaise with project T&C consultants on all matters and ensure reports are compiled and submitted after each inspection.
  
• Documentation:Compile, review, and submit all T&C Method of Statements (MOS) for consultant review and approval.
  
• Additional Duties:Perform any other duties assigned by the PMO.
  

Special Instructions:

• This role is primarily electrical-based.

• Position : M&E Coordinator (A&A Industry) - Up to $5,500 - All Welcome
• Location : Based on Project Sites
• Working hours : Monday to Saturday | 8am to 6pm (Saturday working hours based on site)
• Salary (commensurate with experience) : Up to $5,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Assist M&E Manager in coordinating M&E specific works on site.
• Control site progress & installation quality as per approved Shop Drawings, Technical Submissions and Equipment/Material Procurement/Fabrication/Delivery Schedule for on-time completion.
• Responsible for M&E drawing coordination and production of CSD and individual service drawings quality.
• Responsible for conducting QA/QC inspection, managing RE, RTO and responsible for clearing OA/QC inspections to meet wi construction schedule.
• Responsible for variation order cost collection, cost verification of the VO works and make necessary recommendation of VO prices.
• To check, evaluate and confirm work done and material supply quantity status for the purpose of M&E sub-contractor/NSC vendors progress payments incl. instruction of progress substantiation document preparation by sub-contractors and vendor
• Responsible for site implementation of safety standards to comply with IMS safe work methods.
• Responsible for attendance to daily site co-ordination meeting and provide detail co-ordination with sub contractors.

Requirements:

• Minimum of Diploma in M&E Engineering or relevant; with at least 2 years of experience.
• Willing to work on weekends if site required.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job

listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• Position : Project Engineer (A&A Construction/Junior Role) - Up to 5,500 + Bonus
• Office Location : East - Aljunied
• Working hours : Monday to Friday | 8am to 6pm | Saturday 8am to 12pm
• Salary (commensurate with experience) : Up to $5,500 + Variable Bonus + Annual Leaves + Medical Benefits + Travel Reimbursable
• Duration : Permanent
• Industry : Construction Sector - A&A / Building Works

Main Responsibilities:

• Manage the transmission of documents and drawings to the client and subcontractor to ensure the updated drawings are issued.
• Prepare method of statement and work procedure
• Conduct weekly or monthly meeting with sub-contractors to update progress of work
• Ensure quality of work is achieved and all government and safety regulation are complied
• Oversee drawing management and control of technical documentation
• Manage procurement of resources, monitor and control material usage on site to avoid unnecessary wastage or wrongly usage.
• Assist the Project Manager or Senior Project Engineer in co-ordination with consultants on change order issued and liaise closing with the Quantity surveyor by providing necessary supporting documents on the change order
• Any other duties assigned

Requirements:

• Minimum of Degree in Architectural/ Building / Construction Management or related; with at least 1 year of experience with restoration projects.
• Great team player with pro-active attitude.
• Bilingual in English and Mandarin to liaise with Mandarin speaking associates

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Job Title: Software Engineer(Devices) - C++ & UML

Job Type: Contract - 2 Years

Job Location: East, Singapore

Job Responsibilities

The successful candidate will be responsible for the design and development of one or more devices that are part of an integrated e-payment Fare Collection System. The successful candidate will also be involved in the software development lifecycle from definition of requirements to design and development, and testing.

The activities required to be performed shall include the following:

• Requirements gathering.
• Design and develop software applications for embedded devices.
• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual,Training Manual and others documents as required in the SDLC processes.
• Assist day-to-day application support issues.
• Liaise with users on the requirementtesting and production issues

Qualifications & Requirements:

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object-oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• Experience in multi-threading, socket programming and serial/USB communication.
• At least 5 years’ experience in object-oriented software development
• Prior experience in following areas Scrum AGILE methodology process is a plus
• Scrum AGILE methodology process
• Develop and integrate embedded devices with cloud platforms
• Strong analytical and problem-solving skills
• Good written and verbal communication skills
• Self-motivated, independent and a good team player.

This is an outsourced role.

If you are looking for an opportunity and your skills align with this job, please send your updated CV/resume (in Word format) to Mounika at [email protected].

“This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to RMA Groups’s PDPA and e2i’s PDPA.”

Mounika Tanuku

EA Regn. No. R22109193

EA Licence No. 93C4403

Job Title : Senior Software Engineer

Job Type : Contract 3 years(Extendable)

Job Location : West, Singapore

Key Skills : .NET C#, Angular, Full-Stack Development, Microservices Architecture, Containerization, Knowledge in AI/ML, CI/CD

Job Scope: We are seeking an experienced Senior Software Engineer to contribute to developing integrated smart manufacturing applications. Background with software development in manufacturing operations (planning and scheduling, simulation, inventory analytic domain).

Key Responsibilities:

• Design and implement robust full-stack applications using .NET C# and Angular
• Develop scalable microservice architectures, and implement containerization and container orchestration
• Integrate AI/ML capabilities within manufacturing software, ensuring seamless interoperability across the ecosystem
• Implement efficient data management and real-time processing solutions, adhering to best practices in cloud-native software design
• Collaborate cross-functionally to align technical solutions with business requirements, evaluating and recommending appropriate technologies
• Contribute to the development of AI models and applications that enhance manufacturing operations and processes

Requirements

• Bachelor/Master's degree in Computer Science, Software Engineering, or a related technical field.
• 5+ years of experience in software development, with a focus on backend .NET C# and frontend Angular.
• Proficient in designing and implementing maintainable, scalable, and secure software architectures.
• Hands-on experience with containerization (Docker) and container orchestration (Kubernetes).
• Familiarity with cloud-native technologies and the ability to leverage cloud services from AWS or Azure.
• Understanding of DevOps practices, including CI/CD pipelines.
• Knowledge of AI/ML frameworks and the ability to integrate AI capabilities within manufacturing software.
• Familiarity with industrial IoT and edge computing in manufacturing environments.
• Strong problem-solving skills and the ability to learn new technologies quickly
• Excellent communication and collaboration skills to work effectively in a multi-disciplinary team.

If you are interested, kindly send your resume (in MS Word format) to Mounika at [email protected] stating your salary expectations & availability to take it forward.

All Curriculum Vitae will be treated with the strictest confidentiality. By sending us your personal data, you are deemed to consent to RMA Consultants Pte Ltd and its affiliates collecting, using and disclosing your personal data for the purposes set out in our Data Protection Policy at http://bit.ly/3GHgsknand Privacy Policy at http://bit.ly/3W63rp7.

This is in partnership with the Employment and Employability Institute Pte Ltd (“e2i”).

"e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training, and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to RMA Groups’s PDPA and e2i’s PDPA.”

Mounika Tanuku|EA Regn. No. R22109193

RMA Consultants Pte Ltd|EA Licence No. 93C4403