About the Job:

Job Title: Automation Engineer/Senior Automation Engineer

Location: Singapore, On-Site

Responsibilities:

· Responsible for design, coding and support of DeltaV system on site.

· Partial or full ownership in development and implementation of hardware and software solutions pertaining to industrial standards.

· Design and develop system architecture, functional specifications, control strategies and supporting documents as per industry standards.

· Review the life cycle documents/deliverables for the project.

· Determine the process requirements and translate them to automation design.

Resquirements:

· Bachelor’s degree in Automation, Electrical or Bioengineering,

· Experience in Emerson DeltaV DCS or similar, ideally in Pharma industry.

· Experience in designing and commissioning of DeltaV DCS or similar for pharma industry.

· Technical proficiency in determining hardware and software solutions for control systems.

· Familiarity with networking, field devices, control panel design and PLC control systems.

· Experience with design and configuration of communication protocols and interface between DeltaV DCS and other systems.

· Good understanding of S88 and cGMP standards.

· Highly skilled in design of Physical and Procedural layer in batch design.

· Ability to be a team player at all levels.

· Experience in automation roles for FAT, SAT and site commissioning.

· Knowledge of MES interface will be an advantage.

Interested candidates please reach out to us.

Phone: +65-92414243, Email: [email protected]

• Provide pre-sales technical support to propose cost competitive system design solution based on tender spec & customer requirement
• Design solutions for Access Control, CCTV, Public Address, Emergency Voice Communication, Fire Alarm, Integrated Security Management and other necessary system as deemed required by the prospective customer / project (90 %)
• Foundational understanding of IT and Network systems will be necessary in design and technical assessments.
• Knowledge of Cyber-security issues and solutions will be an advantage.
• Review technical specification, system schematic, floor-plan drawings documents
• Provide system proposal and design that meet requirements & be cost competitive
• Manage the technical Compliance Appraisal, prepare Bill of Quantities and system write-up for the designed systems
• Manage Installation Work Appraisal (Scope of Work for installation)
• Prepare technical document submissions & product sourcing
• Support technical meeting with customers, end-users, consultants & vendors etc
• Demonstrate systems / products performance to clients and staffs
• Collaborate with sales, purchase & admin teams to meet tender submission date in time
• Product evaluation & POC support on potential system
• Report various system job request status with respect to milestone schedule to Section Head and all technical problem hindering system design progress

Marketing Executive

• Working Days: Monday – Friday
• Working Hours: 08:00am - 05 :00pm
• Location: Jurong
• Salary: $2,700 - $3,000 + $90 Transport Allowance

Responsibilities

• Brand promo activities/packaging artworks editing, managing advertising and promotion
• Support as in house designer for urgent packaging editing/new POSMs creation etc
• Website maintenance/editing (ensuring website information is up to date)
• To support in development and planning of new products with the mission of taking a product from concept to commercialization
• To support ad hoc marketing activities whenever possible.

Requirements

• Relevant Experience in the same capacity
• Knowledge on using illustrator/photoshops for design of artworks/POSMs/editing package
• Social media knowledge/experience will be added advantage

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Good Bonus - AWS + Up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Manage the Supervisory control and data acquisition (SCADA) system and distribution management systems applications;

Involved in enhancement of the software functionality and troubleshooting to maintain system reliability and performance;

Maintain accurate records of maintenance activities, enhancements and fixes;

Collaborate and communicate with both internal and external customers to ensure smooth execution of projects and provide timely updates on project status;

Assist client for Annual Vulnerability Assessment and Penetration (VAPT) activity and follow up on the findings;

Follow up with product supplier and vendors, test and install the system patching when necessary;

Other ad-hoc duties as assigned.

Requirements:

Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognized Polytechnic/University;

Knowledge in programming languages such as C, C++ and Java;

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus up to 6 Month depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Job Responsibilities:

• Engage in B2B sales activities.
• Identify and pursue new sales opportunities until closure.
• Collaborate closely with reputable partners such as Bosch, Yamaha, Biamp, Extron, Crestron, Bose, Martin Audio, QSC, Poly, Logitech, Microsoft, etc., as well as our in-house AV Designer Team, to develop tailored solutions that align with customer requirements.
• Negotiate pricing with partners to ensure competitive bids.
• Assist in managing partnerships with manufacturers of audio solutions and related products.
• Explore and secure partnerships for audio-related solutions to enhance our offerings to customers.
• Focus on providing Pro Audio Solutions for large venues like theaters and auditoriums.
• Target primary markets in the hospitality and education sectors.

Job Requirements:

• Must have minimum 2 years of sales experience in a B2B environment with good sales track record
• Must have experience in a project-based, development of customised solutions sales environment
• Must have Experience in Pro sound solution for Large Venues
• Experience in Audio & Visual, videoconferencing, telephony solutions is a plus.

Senior Software Engineer | Up to $8k | 5 Days | Yishun

Senior Software Engineer
Work Location: Yishun Industrial Park A [ Canberra MRT] / Have company transport
$6000 to $8000 depends on experience
Working Days: 5 Days // 8am/8.30am - 5.30pm/6pm

Role:
As a Senior/Staff Software Engineer, you will be required to develop solutions for SPI, factory line and their associated modules and configurable options. You will also be responsible for solving complex engineering problems using new or existing technologies, and through innovation, creativity, and technical analysis with a strong focus on quality.

Requirements:

• Master’s or bachelor’s Degree in engineering or related discipline
• Minimum 5 years of relevant working experience
• Experience in analysis of software design and implementation for hardware systems
• Experience in the design and validation of engineering requirements
• Experience in Source Control Systems, Visual Studio and Software Development Lifecycle
• Proficient in C++ programming language, UML and appropriate usage of design patterns
• Proficient knowledge of appropriate equipment software and
• Experience in Unit Testing and Dependency Injection
• Experience in WPF, GIT, hardware and real time control systems will be advantageous

Responsibilities

• Lead technological solutions to maintain and extend an advantage in a competitive market
• Handle complex software design tasks to predetermined schedules with a strong focus on quality
• Maintain focus on quality when challenged with urgent customer requests/bugs
• Maintain a balance between functional design and time to market, ensuring maintainability and scalability
• Responsible for the selection and implementation of design concepts to translate to productionised products
• Provide evidence of appropriate solution for customers via technical reviews
• Undertake continual professional development including both personal and technical competencies
• Guide and support the junior team members on their professional development
• Perform any other ad-hoc duties as assigned

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

• Good Bonus - AWS + Up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Manage the Supervisory control and data acquisition (SCADA) system and distribution management systems applications;

Involved in enhancement of the software functionality and troubleshooting to maintain system reliability and performance;

Maintain accurate records of maintenance activities, enhancements and fixes;

Collaborate and communicate with both internal and external customers to ensure smooth execution of projects and provide timely updates on project status;

Assist client for Annual Vulnerability Assessment and Penetration (VAPT) activity and follow up on the findings;

Follow up with product supplier and vendors, test and install the system patching when necessary;

Other ad-hoc duties as assigned.

Requirements:

Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognized Polytechnic/University;

Knowledge in programming languages such as C, C++ and Java;

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus up to 6 Month depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsibilities:

· Design, develop, and maintain .NET-based containerized applications.

· Write clean, scalable code using C# programming language and .NET frameworks (e.g., ASP.NET Core, MVC).

· Collaborate with cross-functional teams to define, design, and ship new features.

· Troubleshoot, debug, and resolve issues in existing software applications.

· Participate in code reviews, ensuring code quality and adherence to coding standards.

Requirements:

· Experience with web development frameworks such as ASP.NET Core or MVC.

· Knowledge of front-end technologies like HTML5, CSS3, JavaScript, and front-end frameworks (e.g., React, Angular, Vue.js).

· Familiarity with databases (SQL Server, MySQL) and ORM frameworks (Entity Framework).

· Understanding of Agile methodologies and software development lifecycle (SDLC).

· Excellent problem-solving skills and strong communication skills.

Qualifications:

· Bachelor’s degree in Computer Science, Engineering, or a related field.

· Proven experience as a .NET Developer or similar role

• Good Bonus - AWS + Up to 6 month Variable Bonus / Permanent Role

Engineer / Electrical engineer / Project Engineer / Junior & Senior & Engineering can apply

• Entry level / Junior / Senior / No experience welcome apply X 3 Opening

• Full training provided

Responsibilities:

Manage the Supervisory control and data acquisition (SCADA) system and distribution management systems applications;

Involved in enhancement of the software functionality and troubleshooting to maintain system reliability and performance;

Maintain accurate records of maintenance activities, enhancements and fixes;

Collaborate and communicate with both internal and external customers to ensure smooth execution of projects and provide timely updates on project status;

Assist client for Annual Vulnerability Assessment and Penetration (VAPT) activity and follow up on the findings;

Follow up with product supplier and vendors, test and install the system patching when necessary;

Other ad-hoc duties as assigned.

Requirements:

Diploma/Degree in Electrical/Electronics/Computer/Software Engineering from a recognized Polytechnic/University;

Knowledge in programming languages such as C, C++ and Java;

Salary for experience candidates will be considered based on the years of experience and our internal salary structure

1 month AWS

Variable Bonus up to 6 Month depending on individual and company performance

Working hours: 8.00 am to 5.00 pm / 8.30 to 5.30 pm / 9.00 am to 6.00 pm / 9.30 am to 6.30pm / 10.00am to 7.00pm

Working days: Monday to Friday (1 day work from home per week)

Annual Leave: 14 days up to 17 days for non-executive (Assistant Engineer and below)

18 days up to 21 days for executive (Engineer and above)

Medical benefits of $500 per financial year (Benefit is extended to spouse and children (below 21 years old) of married employees)

Insurance coverage: Hospital & Surgical (Benefit is extended to spouse and children (below 25 years old) of married male employees and child (below 25 years old) of married female employees)

Term Life

Personal Accident

Maternity Insurance for female employee and spouse of male employee on the birth of their 1st 2 children claimable up to delivery bill of $6,000.00 whichever is lower.

Flex Dollars of $500 per financial year

Free annual year-end Health Check-Up

Monthly Birthday Party Celebration

Monthly Sports Activities

New Born Gift

CSR Initiatives

Department Bonding Activities

Biennial team building and staff appreciation dinner

Gym Corner for employees to exercise

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Sales Engineer | 5 Days | Class 3 + Own Car | Up to $4k | Gul Circle

Location: Gul Crescent

Working Hours: 8.15am - 5.30pm
Working Days: 5 Days [Monday - Friday]
Salary: $3000 - $4000 + $1020 (transport allowance)+ $70 (phone allowance)

The role is to market a full range of Professional & Industrial Cleaning equipment, and accessories & tools, to corporate customers, with an emphasis in oil and gas sectors.

Responsibilities:

• Serve existing assigned accounts and prospect potential new customers
• Learn & familiarise our products well, understand users’ needs, and so be able to offer solutions and assistance to meet their requirements
• Perform hands-on product demonstrations, as well as occasionally conduct presentations to mid-size audiences including management levels

Requirement

• Polytechnic Diploma or equivalent; preferably in a business associated or engineering related field
• Experienced in corporate/industrial sales, especially in the oil and gas setting
• Preferably hold a Class 3 driving license and own a car

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Job Description & Requirements

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Possesses at least 7 years of experience in design and construction.
• Minimum Degree in Civil Engineering from accredited Universities.
• Experience in MRT & LTA projects
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.

Well versed in Autocad and BIM software is preferred

Job Description & Requirements

• Conduct structure analysis
• Provide technical engineering information to ensure compliance with all engineering standards, codes, specifications and design instructions.
• Develop architectural/engineering drawings and ensure specifications/regulations are followed.
• Liaise with architects, engineers and other departments to ensure that the design intentions are met.
• Prepare bills of quantities and cost estimation whenever required
• Ability to identify potential and discrepancies that affect the design and recommend solutions to relevant team/department.
• Adherence to safety practices.

Requirements:

• Possesses at least 7 years of experience in design and construction.
• Minimum Degree in Civil Engineering from accredited Universities.
• Experience in MRT & LTA projects
• Well versed in structure analysis and design software such as ORION, SAP2000, SAFE, PROKON, PLAXIS or other similar software.

Well versed in Autocad and BIM software is preferred

Responsibilities:

• Oversee and manage the repair and maintenance of mechanical equipment, including pumps, compressors, heat exchangers, and pipelines, in the chemical plant.
• Develop and implement preventive and predictive maintenance programs for mechanical systems, ensuring minimal downtime and optimal plant performance.
• Perform root cause analysis (RCA) on equipment failures and recommend corrective and preventive measures to avoid recurrence.
• Troubleshoot and resolve basic electrical maintenance issues, such as motors, control panels, and power distribution systems, in collaboration with the electrical team.
• Supervise and coordinate with contractors for equipment overhauls, inspections, and specialized repair activities, ensuring adherence to plant standards and timelines.
• Ensure all maintenance activities are conducted in compliance with health, safety, and environmental (HSE) regulations and company policies.
• Conduct regular inspections of mechanical and electrical systems, maintaining detailed records and ensuring proper documentation of maintenance activities.
• Plan and execute shutdowns and turnarounds, including the scheduling of mechanical and electrical tasks to ensure efficient and timely completion.
• Recommend and support equipment upgrades or modifications to enhance plant reliability, energy efficiency, and operational safety.
• Collaborate with cross-functional teams, including operations, safety, and electrical departments, to maintain seamless plant operations.

Requirements:

• Minimum Diploma / Degree in Mechanical Engineering or equivalent
• At least 4 – 5 years of repair & maintenance experience in chemical plant
• Must be mechanical background, with knowledge and basic experience in the electrical maintenance side.
• Strong in analytical and problem solving skills
• Proficient in MS office

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 17C8690

Please Provide:

1) Availability

2) Current/ Expected salary

3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Oversee and manage the repair and maintenance of mechanical equipment, including pumps, compressors, heat exchangers, and pipelines, in the chemical plant.
• Develop and implement preventive and predictive maintenance programs for mechanical systems, ensuring minimal downtime and optimal plant performance.
• Perform root cause analysis (RCA) on equipment failures and recommend corrective and preventive measures to avoid recurrence.
• Troubleshoot and resolve basic electrical maintenance issues, such as motors, control panels, and power distribution systems, in collaboration with the electrical team.
• Supervise and coordinate with contractors for equipment overhauls, inspections, and specialized repair activities, ensuring adherence to plant standards and timelines.
• Ensure all maintenance activities are conducted in compliance with health, safety, and environmental (HSE) regulations and company policies.
• Conduct regular inspections of mechanical and electrical systems, maintaining detailed records and ensuring proper documentation of maintenance activities.
• Plan and execute shutdowns and turnarounds, including the scheduling of mechanical and electrical tasks to ensure efficient and timely completion.
• Recommend and support equipment upgrades or modifications to enhance plant reliability, energy efficiency, and operational safety.
• Collaborate with cross-functional teams, including operations, safety, and electrical departments, to maintain seamless plant operations.

Requirements:

• Minimum Diploma / Degree in Mechanical Engineering or equivalent
• At least 4 – 5 years of repair & maintenance experience in chemical plant
• Must be mechanical background, with knowledge and basic experience in the electrical maintenance side.
• Strong in analytical and problem solving skills
• Proficient in MS office

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 17C8690

Please Provide:

1) Availability

2) Current/ Expected salary

3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Oversee and manage the repair and maintenance of mechanical equipment, including pumps, compressors, heat exchangers, and pipelines, in the chemical plant.
• Develop and implement preventive and predictive maintenance programs for mechanical systems, ensuring minimal downtime and optimal plant performance.
• Perform root cause analysis (RCA) on equipment failures and recommend corrective and preventive measures to avoid recurrence.
• Troubleshoot and resolve basic electrical maintenance issues, such as motors, control panels, and power distribution systems, in collaboration with the electrical team.
• Supervise and coordinate with contractors for equipment overhauls, inspections, and specialized repair activities, ensuring adherence to plant standards and timelines.
• Ensure all maintenance activities are conducted in compliance with health, safety, and environmental (HSE) regulations and company policies.
• Conduct regular inspections of mechanical and electrical systems, maintaining detailed records and ensuring proper documentation of maintenance activities.
• Plan and execute shutdowns and turnarounds, including the scheduling of mechanical and electrical tasks to ensure efficient and timely completion.
• Recommend and support equipment upgrades or modifications to enhance plant reliability, energy efficiency, and operational safety.
• Collaborate with cross-functional teams, including operations, safety, and electrical departments, to maintain seamless plant operations.

Requirements:

• Minimum Diploma / Degree in Mechanical Engineering or equivalent
• At least 4 – 5 years of repair & maintenance experience in chemical plant
• Must be mechanical background, with knowledge and basic experience in the electrical maintenance side.
• Strong in analytical and problem solving skills
• Proficient in MS office

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 17C8690

Please Provide:

1) Availability

2) Current/ Expected salary

3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

QA Technician (Pail/SMD and Large Steel Drum)

Basic Salary - $1400 - $2000
Working hours – Mon to Thu 7.30am-5pm, Fri 7.30am- 4pm (5 days)
Working location - Pioneer

Job Scopes:

They are packaging company.

Summary: To help the process flow be more effective are in good condition and to ensure that only good quality products are delivered to customers and meet customer requirement. (Report to QC manager).

• Perform Final Inspection
• Testing on incoming goods ie . Paint/Lacquer/Steel (Every batch)
• In Process quality verification (Min Twice a day)
• Inhouse Measuring Equipment’s calibration (Twice yearly)
• Documentation – Process records / Test report
• Raise Non-Conformity Report (Daily)
• Drums performance testing (UN test)
• Others – Ad-hoc basis Example: First Article Inspection, Customer complaint investigation, Product Packaging Test
• Liaising with production, Logistics, Supply Chain/Store, Sales & Marketing departments.

Job Requirements:

• 2 years working experience in manufacturing site preferred
• Basic computer knowledge
• Knowledge in ISO procedure & statistical analysis (advantage)

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Position title: Sales Engineer
• Location: Loyang Way, Loyang Industrial Estate
• Working Days: Mon - Fri
• Working hours: 830 a.m. to 530p.m.
• Salary: $3,000 - $4,500 (depends on experience)

Interested applicants can also send your resume to WA: +65 8827 8712 (Ms Lynne) and allow our Consultant to match you with our Clients. No Charges will be incurred by Candidates for any service rendered.

TAN LEE XIAN Reg No: R24123487

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

Responsibilities:

• Oversee and manage the repair and maintenance of mechanical equipment, including pumps, compressors, heat exchangers, and pipelines, in the chemical plant.
• Develop and implement preventive and predictive maintenance programs for mechanical systems, ensuring minimal downtime and optimal plant performance.
• Perform root cause analysis (RCA) on equipment failures and recommend corrective and preventive measures to avoid recurrence.
• Troubleshoot and resolve basic electrical maintenance issues, such as motors, control panels, and power distribution systems, in collaboration with the electrical team.
• Supervise and coordinate with contractors for equipment overhauls, inspections, and specialized repair activities, ensuring adherence to plant standards and timelines.
• Ensure all maintenance activities are conducted in compliance with health, safety, and environmental (HSE) regulations and company policies.
• Conduct regular inspections of mechanical and electrical systems, maintaining detailed records and ensuring proper documentation of maintenance activities.
• Plan and execute shutdowns and turnarounds, including the scheduling of mechanical and electrical tasks to ensure efficient and timely completion.
• Recommend and support equipment upgrades or modifications to enhance plant reliability, energy efficiency, and operational safety.
• Collaborate with cross-functional teams, including operations, safety, and electrical departments, to maintain seamless plant operations.

Requirements:

• Minimum Diploma / Degree in Mechanical Engineering or equivalent
• At least 4 – 5 years of repair & maintenance experience in chemical plant
• Must be mechanical background, with knowledge and basic experience in the electrical maintenance side.
• Strong in analytical and problem solving skills
• Proficient in MS office

Interested applicants, please write in through CareersFuture with detailed resume in MS Words format.

EA License Number: 17C8690

Please Provide:

1) Availability

2) Current/ Expected salary

3) Reasons for leaving previous employments

We regret that only shortlisted candidates will be notified.

Responsibilities

• Liase with Architects, Clients and other Consultants for the design of structural and civil Engineering works.
• Design , coordinate, manage and supervise the civil & structural project that has been assigned.
• Perform structural analysis and design including drafting in building or any structures as required by the project.
• Liase with clients & consultants to meet C & S requirements for submissions to local authorities.
• Coordinate to ensure civil and structural requirements is meet for project tender,submission and construction schedule.

Requirements

• Degree in Civil / Structural Engineering.
• 1-2 experience in Structural Design and able to work independently will be preferred.
• Entry Level Candidate without experience are welcome to apply.
• Knowledge in AutoCad & Structural Software e.g. STAAD. Pro, Orion, Esteem, MidasGen, Etabs, etc will be advantage.
• Good positive working attitude, self-motivated and responsible.
• Salary will be commensurate based on working experience.

Key Responsibilities:

• Assist in the planning, execution, and monitoring of civil engineering projects to ensure they are completed on time and within budget.
• Supervise construction activities on-site, ensuring compliance with technical specifications, safety regulations, and quality standards.
• Liaise with project managers, clients, subcontractors, and authorities to ensure effective communication and project alignment.
• Conduct regular site inspections to monitor progress, quality of work, and adherence to safety protocols.
• Review technical drawings and designs for accuracy and ensure they are implemented correctly on-site.
• Prepare progress reports and documentation for management and stakeholders.
• Identify potential issues or risks during project execution and develop appropriate mitigation strategies.

Qualifications:

• Education: Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board (PEB) or Building Construction Authority (BCA).
• Experience: Minimum of 10 years of relevant local experience in civil engineering projects, specifically in infrastructure, sewer & drainage, and roadworks.
• Certifications: Possession of Resident Engineer (RE) or Resident Technical Officer (RTO) certification is preferred.
• Project Exposure: Experience working on LTA or PUB projects is highly desirable.

Skills:

• Strong technical knowledge of civil engineering principles and practices.
• Excellent leadership and team collaboration skills.
• Proficient in project management software, AutoCAD, MS Office, and MS Project.
• Ability to work independently with minimal supervision while meeting tight deadlines.
• Strong problem-solving skills and attention to detail.

Benefits:

• Competitive salary package commensurate with experience.
• Opportunities for professional development and career advancement.

Please submit your updated resume in MS Word format by clicking the QUICK APPLY button.

We regret to inform that only shortlisted candidates will be notified. Please note that your response to this advertisement will constitute informed consent to the collection, use, and/or disclosure of personal data by AlwaysHired, its affiliates and, where necessary, to relevant third parties, for purposes such as job application processing, career advisory, research, and other administrative purposes, in compliance with the relevant provisions of the Privacy Policy available at www.alwayshired.com.sg/privacy-policy.

Larry Loh Yi Song
Registration Number: R23115969
AlwaysHired Pte Ltd
EA Licence No: 24C2293

Scope:

• Identify and develop new business opportunities by prospecting and networking with potential customers.
• Build and maintain strong relationships with existing clients to secure repeat business and identify upselling opportunities.
• Meet or exceed sales targets and contribute to the overall growth of the business.
• Provide in-depth technical consultations to customers to understand their requirements for pneumatic systems, motion control, and fluid handling.
• Recommend and design customized solutions based on client needs, utilizing company products and capabilities.
• Conduct product demonstrations and technical presentations to highlight product benefits and ROI.
• Monitor industry trends, competitor activities, and market conditions to identify opportunities and adapt strategies.
• Prepare accurate and competitive technical proposals, quotations, and tenders for customers.
• Act as the primary point of contact for customers during and after the sales process, ensuring seamless communication and support.
• Resolve customer concerns and ensure long-term client satisfaction.

Qualifications:

• Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related field.
• Minimum 5–7 years of experience in technical sales or business development within the industrial automation or fluid control sector.
• Proven track record of achieving and exceeding sales targets.
• Proficiency in CRM tools, sales reporting, and MS Office applications.
• Problem-solving skills with the ability to handle complex technical discussions with customers.

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Design and project management of mechanical and electrical engineering systems (MVAC, Elect, Lifts, Fire Protection, Plumbing and Sanitary, etc) for building projects in the various sectors such as residential, office, commercial, hospital, institutional, etc. Engineer shall be expected to carry out design work, attendance at consultants meetings and management of the relevant M&E aspects of the construction activities.

• Degree holder with about 8 years’ experience
• experience in design and implementation.
• Able to multi-task and work in a fast paced environment
• Possess initiative, drive and ability to work independently
• Good interpersonal/communicational skills
• Experience as a consulting in the construction industry is a pre-requisite

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, please click to apply. joey.teo(a)bayesrecruitment.com

Bayes Recruitment Pte Ltd

16 Collyer Quay, Singapore 049318

bayesrecruitment.com

EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Responsibilities:

• Inspect, maintain, and repair electrical systems
• Responsible to calculate electrical usage and voltage
• Perform installation of new electrical systems, wiring, and components on construction site
• Ensure all work complies with regulations, safety standards, and environmental guidelines
• Conduct regular inspections and preventive maintenance to minimize the risk of electrical failures

Requirements:

• Nitec in Electrical and Electronics Engineering or its equivalent
• Minimum 2 years of related working experience
• Knowledge in electrical systems and automation in construction industry
• Strong communication, teamwork, and interpersonal skills

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R24121656

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

• Responsible for the design, implementation and monitoring of all electrical related works at site
• Detailed design of all Electrical related works
• Interpret tender drawings and studies the contract documents and applicable standards or specifications prior to design of the Electrical works
• Manage directly and provide engineering and technical supports to all the electrical work groups at site
• Coordinates with Client / Consultant’s representatives for any site instructions and inspection of works
• Support the Construction Manager in accomplishing all the goals and targets for the electrical groups at site
• Ensure that all the works done are in accordance with the approved construction drawings, contract documents, project specifications, and all applicable standards whether local, national or international standards
• Ensure that all site works are done according to all applicable quality standards
• Directly responsible for the safety of all electrical group personnel of the project by ensuring that the project execution will be done according to all applicable health, safety, sanitary and environmental standards.

Technical

• Design, integration & coordination, installation & commissioning of mechanical systems and services required for the project
• Liaise with Construction/Installation Manager to ensure job is on schedule on Site.
• Liaise with Client on all technical aspects of the project.
• Provides engineering advice for the Construction/Installation Team.
• Attend meetings with client on all disciplines of the work (i.e. 1 etc.) as required.
• Prepares with the Quality Manager all Inspection and Test Plans and associated Project Specific Procedures.
• Ensure that the quality requirements of the client are adhered to and that company procedures are followed.
• Coordination & integration of the design with other engineering design disciplines & services
• Ensure project timetabling requirements are met
• Development / production of inspection & test and operating & maintenance manual documentation.
• Ensure local regulatory and OHS requirements are maintained
• Ensure that the surveys of installations throughout the project are conducted in a professional manner with all results being reviewed and accepted by UGL. All actions resulting from these surveys are coordinated by the Engineer until completion.
• Provide written reports on engineering activities as required by the Project Manager.
• Mentor Engineering Graduates and Engineering Vacation Students (Engineering Assistant)
• Maintain documentation and registers
• Provide monthly reporting data to the Engineering Manager as required

QUALIFICATIONS, SKILLS & EXPERIENCE REQUIRED

• Minimum 5 years’ experience as an Electrical Engineer within a similar industry.
• Degree in Electrical Engineering with more than 5 years’ experience in basic design requirements, fabrication, installation, T&C and all site activities related to all electrical works.
• Familiar with all electrical engineering methodologies as well as the corresponding equipment, materials, consumables and tool allocations related to electrical works.
• Ability to work as part of a close-knit management team and manage numerous activities / projects simultaneously – both short and long term.
• Ability to work on own initiative and with the minimum of supervision
• Outgoing personality essential for dealing directly with Clients and their design team
• Demonstrated ability to work independently to organize and prioritize demands, handlemultiple complex tasks simultaneously, set and meet deadlines and follow-through within a fast-paced environment with multiple and competing demand