*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

Execute the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE requirements

Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase / Commercial proposal development

▪ Bill of material

▪ Plot plan layout proposal

▪ Support lead to define man hour and cost estimate D - Project Execution

▪ Ensure the Piping and Layout engineering support to different projects

▪ Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations

▪ Analyse technical documents (e.g. specifications, calculation notes, drawings) to assess the scope of the studies required and the potential risks

▪ Seek solutions which can bring overall savings to the project

▪ Estimate quantities or validate estimation done by other specialist of the team

▪ Check all produced documents (internal or subcontracted) like design reports, technical specifications, drawings under responsibility

▪ Write the Piping and Layout methodologies / Design Premises comprehensive of all necessary data, general and specific design guidelines

▪ Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations

▪ Analyse project technical documents to validate consistency between the budget, resources and means allocated for the work completion and the targets to be met

▪ Organize the work of the team under responsibility

▪ Define and follow-up the planning of resources mobilization

▪ Monitor and report actual progress including 3D / check for Discipline activities, includ ing control of men-hours and delivered documents

▪ Control the input data for team activities and check/review all documents issued by the team

▪ Attend to internal review activities and inter-discipline check meetings

▪ Provide technical support to Project group

▪ Provide technical support to Procurement, Subcontracting and Construction activities included in the scope of work

▪ Supervise the writing of specifications and requisitions as well as technical bid evaluations

▪ Inform on a permanent basis the Project Piping and Layout leader of any foreseen technical or financial or delay risk

▪ Feed the Piping and Layout Department improvement system by reverting the lessons learned during the project E - Construction and start up

▪ Participate to test circuit verification

▪ Field engineering during construction activities

▪ Assist, when necessary, engineering adjustment on site

▪ Material management at site

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

*This role will be hired on contract basis to support our client's upcoming project.*

About the role:

The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements.

Tasks include:

A - Development Technology know how and Commercial support

B - Feasibility

C - Bidding phase / Commercial proposal development

▪ Estimate quantity and cost for critical support

D - Project Execution

▪ Be responsible for the quality, respect of budget and respect of project schedule for piping flexibility analysi s tasks

▪ Review the Client technical documentation and requirements

▪ Be responsible for the design of all piping supports components

▪ Issue project piping flexibility (Stress analysis) specification and critical lines list

▪ Perform calculations of critical piping networks

▪ Issue loads to allow the design of pipe-rack and foundations

▪ Issue technical part of requisitions for all piping supports components required by flexibility analysis

▪ Issue technical bid evaluation for all piping supports components offers

▪ Issue technical part of requisitions for all piping supports components purchase orders

▪ Review and approve vendors documents

▪ Maintain project technical files and update Company standards

▪ Perform the inter-disciplines checking for the part of documents in accordance with the scope of piping flexibility section

▪ Check sub-contracted discipline engineering documents in accordance with the scope of piping flexibility section

▪ Check documents issued by piping flexibility engineers

▪ Check the isometrics for construction of critical lines

▪ Assist P and ID section preparation for flexibility inputs of line list

▪ Inform on a permanent basis the Project Piping and Layout leader of any foreseen tech nical or cost impact or delay risk

▪ Capitalize piping flexibility activities performed during the project E - Construction and start up

▪ Provide technical support

▪ Assist, when necessary, engineering adjustmenton site

F - Home ofice activities (Master)

▪ Projects coordination: provide input to Flexibility Engineer to harmonize design and methodologies

▪ Provide support to projects and procurements to solve non standards problems

▪ Define the modification of department work flow and dep technical standards

▪ Participate to the modification of company work flow and technical standardisation

▪ Collect project feed backs for continuous improvement implementation (Lesson Learned)

▪ Participate to vendor and outsourcing qualification

▪ Participate to project/company procurement strategy (Purchasing team)

▪ Develop and scout tools for simplified design activities

▪ Plan, control and manage outsourcing engineering center

*Please note that only shortlisted candidates will be contacted*

EA Name: Kingsforce Management Services Pte. Ltd.

EA License: 94C3545

EAP Name: Paola Jane Ofrasio Fajardo

EAP Reg No: R1325507

Salary: Up to basic $3.8K + $850 transport allowance + $250 meal allowance.

Location: Woodlands, Tampines

Working hours: 9am - 6pm (Mon - Fri)

Responsibilities

• Responsible for setting up, installing, and troubleshooting of semiconductor equipment at customer sites (cleanroom environment)
• Responsible for providing pre and post sales technical support to service and upgrade equipment.
• Assist in technical training for customers on setup, operations and maintenance.
• Build and maintain strong customer relationship.
• Other ad hoc duties assigned

Requirement

• Minimum Diploma/ Degree in Engineering or related field
• No experience needed, training provided!
• Travelling to USA, Europe and India 50% of the time for work

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

Engineer/Senior engineer (Fire protection)

Job Description

Duties & Responsibilities:

• Supervise subcontractors based on shop drawings and method statements.
• Collaborate with authorities and clients on materials and samples.
• Review fire protection design drawings for compliance (e.g., Sprinkler, Fire Alarm).
• Identify discrepancies in M&E, structural, and architectural provisions.
• Manage project execution and attend contractor meetings.
• Review compliance of drawings and allocate tasks to supervisors.
• Plan and lead testing of fire protection systems.
• Coordinate site inspections and rectify defects.
• Prepare manuals and as-built drawings for client handover.

Education / Experience / Skills:

• Degree or Diploma in Mechanical Engineering/Building Services.
• Minimum 5 years of relevant experience.
• Proficient in MS Office with strong communication skills.
• Experience with Water Mist or Foam systems is a plus.

Main Duties:

• Involves in all aspects relating to the Tender, Design and Construction Management of all types of Civil and Structural Systems for Industrial Facilities Buildings.
• In-charge of the design of Concrete and Steel Structures.
• Assists Project Managers in achieving project completion within budget and on schedule and quality.
• Prepares, Issues and Evaluates Tender packages.
• Coordinates with Architectural and Process, Mechanical, Electrical disciplines, and Quantity surveyors.
• Address site issues related to design.
• Liaises with Consultants and sub-contractors.
• Provides direction and coaching to other junior team members.
• Manages timely submission and approvals from local authorities.
• Mentoring Civil & Structural engineers during tendering, design and construction phase based on best practices defined in the engineering efficiency checklist.
• Other Duties:
• Responsible for ensuring to remain familiar with current practices and engineering trends within the industry and remain technically competent.
• Ad hoc duties as determined by management.

Qualifications:

• Degree in Civil/Structural Engineering; master’s degree in Structural Engineering preferred
• Diploma holders with additional 2 - 3 years’ experience unless equated with professional certifications.
• 6 - 8 years of Design and Construction experience
• 1 - 2 years additional experience for each higher grade of progression

Types of Experience:

• Design and Construction experience preferably in industrial buildings with Precast and Long span roof trusses experiences.
• Site experience on piling works, Sub-structure and Super structure works for reinforce concrete and Steel structures and Precast structures.
• Experience working closely with Process, Mechanical and Electrical disciplines, and Quantity surveyor.
• Experience of liaising with consultants and contractors.
• Experience with checking of shop drawings for Precast and steel structures and able to do detailed Design and work in a team and able to provide details for cad.
• Able to do Tender / preliminary Design, Detailed Design, Preparation and Managing the subcontract tender packages and lead the team of Engineers and Computer Aided Design
• Conversant with the Local Authorities requirements for Civil and Structural submissions
• Conversing with other country codes is preferable.
• Willing to travel, if required

• At least 2 years and above on experience in commercial renovation works
• Able to prepare tender document for Design & Build project. BQ, Tender specification, Form of Tender, Drawings (by Designer)
• Able to quantity take off for multiple projects fast and accurately
• Able to source for materials, procure and deliver
• Able to source for new material, new suppliers and sub-contractors when required
• Able to perform site measurement & inspection with sub-contractor to certify work done to date
• Able to communicate fluently with client’s representative, landlord and authorities
• Experience in material market rate
• Experience in all installation market rate
• Good in negotiating prices
• Experience in F&B tender will be an added advantage

Japanese MNC

Salary $2600-$3000

Location: Ubi

Industry: Electronic Component Manufacturer

Monday to Friday 8.30am to 5pm

Requirements

• Electro-mechanical engineering background preferred and the company will provide necessary training for the candidate to assume this position
• Ability to travel at short notice to S.E. Asia and other markets as required by the superior

Job Roles

Technical aspects

• To inspect, service and maintain our company’s crimping tools, machines and equipment to ensure they remain in tip top condition prior to shipping to our customers
• Provide on-site after-sale service such as repair, replace spare parts and provide technical education to the customers who may encounter technical issues when operating our crimping tools, machines and equipment
• Troubleshoot, analyse and recommend service or repair methodology on the crimping tools, machines and equipment to the customers whenever there is a technical breakdown affecting their production operation
• Overhaul and inspect conditions of crimping tools, machines and equipment returned by the customers
  

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Must have previous experience working in plastic moulding company handling new project:

· Receive tooling drawing from customers, arrange tooling fabrication with tool maker.

· sample production and customers' approval for the sample parts.

· engineering change and tooling modification etc until the mass production of the parts.

· Good Pay + Good allowance + Good Bonus

·

· Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

·

· Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsible for tooling drawings, specification filing and maintenance. Manage projects, ensure all tooling are executed smoothly and efficiently against an agreed plan. Perform evaluation and development activities to provide solutions for technical problems to sustain and improved production yield, quality, process cycle-time and cost reduction.

Requirements:

· Degree / Diploma in Engineering or its equivalent with minimum 3 years' experience in plastic injection molding environment.

- 5 days work week

- Working hours - 8.15am to 5.30pm

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

Responsible for tooling drawings, specification filing and maintenance. Manage projects, ensure all tooling are executed smoothly and efficiently against an agreed plan. Perform evaluation and development activities to provide solutions for technical problems to sustain and improved production yield, quality, process cycle-time and cost reduction.

Requirements:

· Degree / Diploma in Engineering or its equivalent with minimum 3 years' experience in plastic injection molding environment.

- 5 days work week

- Working hours - 8.15am to 5.30pm

Good Pay + Good allowance + Good Bonus

Interested candidates please send an updated Resume / CV in Ms Word format to [email protected] or WhatsApp’s your resume to 98332779 ( no Calls)

Consultant in-charge : Quah Li Lian (Lilian) ( Registration No: R1983286 )

· Service clients’ accounts and achieve sales targets

· Manage client’s expectations on project expectations

· Develop project execution strategy

· Obtain quotes from suppliers for materials/fittings for calculation of cost

· Prepare quotation and submission of tender/quotation

· Prepare project budgets and manage cost control based on clients’ budget

· Oversee kick-off meeting with clients

· Submit schedules, concept designs and sample materials for clients to review

· Update organiser/client on the commencement of work

· Coordinate with suppliers to ensure work is completed according to planned schedule

· Oversee handover of project and coordinate with clients regarding defects rectification

· Arrange for invoice billing to clients

· Ensure good client relationship and as primary point of contact for Clients' Project Management team

· Manage specialist design support services and take part in conversion process

· Perform any other adhoc duties

Responsibilities:

- Proficient in AutoCAD software
- Auto-cad skill in drawing update and revision, record-keeping and control & update of Drawings.
- Prepare assembly and detail drawings on the basis of the information and
instruction provided
- Prepare and assists in drawing revisions are required
- Able to work independently with minimum supervision
- Responsible for the project team drafting activities
- Ability to multitask and manage several projects at a time
- Any other duties as assigned.

Requirements:

- Previous document control support or related work experience preferred.
- AutoCAD and MS Office, Outlook, Word, Excel skills.
- Diploma / Degree or equivalent

Responsibilities:

• Able to handle multiple job sites / projects
• Able to liaise with factory carpenters carpentry production works
• Able to communicate fluently with client’s representative, landlord and authorities
• Able to conduct proper inspection for takeover and handover job site on time
• Conducting regular site inspections to assess project progress, identify risks, and ensure compliance with safety protocols and regulatory requirements.
• Managing schedules, budgets, and resources, and coordinating with clients, stakeholders, consultants, and subcontractors
• Work closely with QS on all material ordering
• Assist the Project Director with additional Project Management responsibilities as needed.

Requirements:

• Experience in reading both ID and M&E drawings, including of ironing out discrepancies in drawings
• Experience in detailing installation works, both ID and M&E
• Experience in restaurant renovation will be an added advantage
• Candidates over 5 years project management or civil experience is an advantage.
• Be willing to work onsite and night for commercial projects.
• Good communication and coordination skills.
• Quickly learning ability.
• Good English and Chinese skill (Listening, oral, read and writing). Can communicate in speaking and writing.

Responsibilities:

• Coordinate ID works on site
• Assist the Project team in all aspect of project management such as project progress, monitoring, site supervision, checking of materials and workmanship, control of general workers
• To carry out coordination and liaisons with all relevant parties
• Support the Project manager to ensure projects are completed on time, within budget, meet all safety standards and are of highest quality.
• Responsible for monitoring the daily process and progress at the project site
• Conduct project site inspection.

• $3500 - $4200 + Transport Allowance + Variable Bonus

• Company located at Tai Seng

• Working hour: 9am – 6pm(Monday– Friday)

• Excellent Welfare & Benefits

• Well Established Carpentry Services Company

Job Scope

• Able to coordinate and guide the operations team through the renovation process, provide advice and support, and ensure that the projects are delivered to the best quality, on time and within budget.
• Responsible for direct customer communication from project planning to schedule to completion to ensure customer satisfaction.
• Establish core project management capabilities, including critical skills such as time management, budgeting, scheduling, site supervision, communication, customer service, quality control, safety, documentation and others.
• Work under time constraints to meet specific timelines.
• Ability to handle multiple projects and tasks.
• Communicate with our team of onsite carpenters and follow up with manufacturer's factory with issues that arise on site.

Requirement

• Diploma / Degree in Project Management / Interior Design / Architecture, or a related field.
• 1 to 3 years of relevant experiences

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

Responsibilities:

• To be lead engineer or assistant lead engineer in new shipbuilding or ship repair/retrofit projects
• Provide specialist technical advice and information to internal and external parties
• Prepare detailed design drawing using 3D modelling tools, such detailed design drawing could include ducting design and necessary design document to enable production of prototype for product development
• Review and approve detailed design drawings and documents e.g., piping isometrics, piping layout, ducting arrangement, equipment foundation, equipment installation, machinery room layout, bill of materials and various mechanical outfitting drawings, and ensure that the deliverables meet contractual technical specification and Classification Society’s requirements
• Ensure the detailed design drawings and documents have met the standards set by the department and provide further input for improvement
• Update 3D software database on a regular basis to ensure correctness and consistency of component’s engineering attribute.
• Manage external consultants in engineering integration and deliverables
• Coordinate and lead a team of engineers to ensure timely and accurate engineering deliverables
• Participate in tests and sea trials, where required
• Liaise with ship owners and Classification Societies to obtain approval on engineering deliverables.
• Resolve technical issues raised by ship owners and Classification Societies
  

Requirements:

• Bachelor’s Degree with Honours in Mechanical/Marine/Offshore/Naval Architecture
• At least 5-8 years experience in engineering design on HVAC (Heating Ventilation and Air Conditioning) system
• Good working experience with HVAC turnkey contractor, HVAC equipment supplier, Shipyard HVAC related department
• Well-articulated in presentations to both clients and senior management, with good command of English, both spoken and written
• Strong leadership with project management and interpersonal skills

Knowledge and Skills:

• Strong knowledge of HVAC marine international design codes, Classification/Statutory Rules and Regulations.
• Engineering and design project management skills.
• Software (preferred): AVEVA Marine, AutoCAD or similar functions
• Software (need basis): VA One, Star CCM+, Aveva PID, Pipeflow Expert

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

1) Responsible for proper take -over of confirmed projects from sales department.

2) preparing project schedules , manpower allocation plans and bill of quantity based on project

requirements and cost estimates.

3) Ensuring project drawings/documents are subject to proper internal and external design review

and vertification.

4) Ensuring all project documents are timely updated and subjected to proper project document control.

5)

Create and maintain optimal Database / DWH / Datamart architecture, which may include:

• Build the infrastructure required for optimal extraction, transformation, and loading of data from a wide variety of data sources using Informatica, SQL and related technologies

• Identify, design and implement internal process improvements.

i) Automating manual processes

ii) Optimizing data delivery

iii) Re-designing infrastructure for greater scalability

• Work with stakeholders to identify business needs and build/maintain Datamart

Participate in project and assist the user PM on the followings:

• To coordinate with IT and stakeholders on the completion of the UAT

• To create test cases/ test script

• To conduct UAT testing and post implementation phase

Job Description

• Online and Offline Partial Discharge Measurements for HV electrical assets such as cables , transformers, switchgears , motors and generators
• Offline Cable testings (Hi-pot test, Megger test, Tangent Delta test) above 6.6kV rated Cables
• Infra-Red Thermography for HV and LV Switchboards
• Lightning protection and earthing system measurement.
• Assist to servicing maintenance work by project teams.
• Handling of multiple test equipment from Omicron, Doble Engineering,Qualitrol, IRIS Power, EA Technology, HVPD, PDS, B2 and IPEC

Requirement

· Bachelor Degree in Electrical Engineering (Preferably SIT, NTU)

· Training will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

13th Month & Variable Bonus

Responsibilities:

• Attends / conducts daily tool box briefing, weekly briefing & to participate PSCC meeting.
• Maintains safe, secure, and healthy work environment by following and enforcing standards and procedures, complying with Class/Client regulations.
• Oversees day-to-day project supervision for new construction platform
• Ensures work assigned is carried out effectively and productively in order to meet client specifications and requirements
• Monitors on structure work progress activities.
• Reports on the structure project progressEnsures sub-contractors carry out the work as planned
• Evaluates project to identify issues and opportunities to improve performance
• Identifies and resolve structure interference and propose modification onsite if necessary.
• Monitors drawing and technical information
• Conducts Risk Analysis assessment

Requirements:

• Bachelor's degree, Diploma in Engineering
• 3 – 5 years of relevant working experience in construction of oil & gas offshore platform project
• A team player & be able to work closely with other discipline supervisors.
• Willing to work late hours

Our Address and Working Hours:

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thurs: 8am - 5:15pm

Fri : 8am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.

Job brief

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

Responsibilities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Requirements and skills

• Proven working experience in civil engineering
• Excellent knowledge of design and visualizations software such as AutoCAD,Civil 3D or similar
• Proficiency in site layout, grading, utility design, erosion control, regulatory approvals etc
• Project management and supervision skills
• Strong communication and interpersonal skills
• License of professional engineer
• BS/MA in Civil Engineering

Job brief

We are looking for an innovative Civil Engineer to design, develop and construct a huge range of projects of the physically and naturally built environment from conception through to completion. You will have a say in how the world looks like, work in a fast growing dynamic industry, contribute towards healthy economies and make a lasting positive impact to society.

Responsibilities

• Manage, design, develop, create and maintain small-scale through to large-scale construction projects in a safe, timely and sustainable manner
• Conduct on site investigations and analyze data (maps, reports, tests, drawings and other)
• Carry out technical and feasibility studies and draw up blueprints that satisfy technical specifications
• Assess potential risks, materials and costs
• Provide advice and resolve creatively any emerging problems/deficiencies
• Oversee and mentor staff and liaise with a variety of stakeholders
• Handle over the resulting structures and services for use
• Monitor progress and compile reports in project status
• Manage budget and purchase equipment/materials
• Comply with guidelines and regulations including permits, safety etc and deliver technical files and other technical documentation as required

Requirements and skills

• Proven working experience in civil engineering
• Excellent knowledge of design and visualizations software such as AutoCAD,Civil 3D or similar
• Proficiency in site layout, grading, utility design, erosion control, regulatory approvals etc
• Project management and supervision skills
• Strong communication and interpersonal skills
• License of professional engineer
• BS/MA in Civil Engineering