Job Description:

• Able to assist in Costing
• Proficient in Autocad sanitary plumbing
• Candidate is proficient in Building Information Modeling (BIM)
• Knowledge in AUTOCAD (2D & 3D) & BIM drawing
• Plan, manage and execute design work, typically from concept through to completion and manage design changes during construction stages
• Plan all drawing request to meet the submission deadline
• On time delivery drawings, correct and accurate drawings
• Work closely with assigned PM on Autocad and Drawing Status reporting
• To attend site walk as and when required by the Engineers and Managers
• Ensure compliance with the relevant design codes and specifications

Requirements:

• Minimum 2-3 years relevant experience
• Positive working attitude, self-motivated and responsible
• Able to start work immediately
• Fresh graduates welcome to apply

Job Description

• Industry/ Organization Type: Marine/ Oil & Gas
• Position Title: Design Engineer
• Working Location: Loyang (Transport provided)
• Working Hours: Monday to Friday, 9 am – 6 pm
• Salary Package: Up to $4,200 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Ensure that engineering designs meet project-specific requirements, adhere to Engineering Standard Practices, and align with the company's ISO procedures, as well as national and international engineering norms, codes, and safety standards.
• Create essential documents and drawings, including block diagrams, bills of materials, functional design specifications, design calculations, wiring diagrams, and other necessary documentation. These ensure that equipment can be procured, integrated, tested, installed, and delivered to the customer on schedule.
• Verify that equipment provided for specific projects meets relevant specifications, complies with project technical standards, is correctly configured, and is fully completed.
• Ensure that the specified and designed equipment can be effectively integrated with other systems and equipment with which it interfaces.
• Develop test procedures suitable for project commissioning and provide technical support to the system assembly and integration team.
• Carry out other tasks as assigned by the Projects & Retrofit Manager or Assistant Manager.

APPLY NOW!!!

• At least a Diploma in IT or Engineering with minimum 2 years of related working experience.
• Proficient with AutoCAD and MS Office.
• Proficiency in one or more of the following systems:

1. LAN & IP Telephony: Experience in voice/data network design, implementation, and deployment; familiar with Juniper, Cisco, and HP Procurve switches and routers.
2. Radio Communication: Expertise in HF/VHF/UHF/Microwave/VSAT systems; capable of frequency interference analysis and radio coverage analysis; familiar with analogue/digital radio systems and trunked radio systems.
3. PAGA System: Experience in PAGA system design and sound coverage analysis simulation.
4. Security Systems (CCTV & Access Control): Experience with analogue/IP CCTV and access control systems; familiarity with Pelco, Bosch, Synetic, GE, LENEL, Bosch systems; PLC system experience is a plus.
5. Navigation Systems: Knowledge of Aeronautical VHF Radio, Meteorological Monitoring, Non-Directional Beacons, Marine Radar, GMDSS, Gyrocompass, and Navigation Aids.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68836 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/Organization Type: Land and Offshore Engineering Solutions Provider
• Position Title: Design Engineer
• Working Location: Gul Circle
• Working Hours: Monday – Friday, 8 am – 5 pm
• Salary Package: Up to $3,500 + OT + VB
• Duration: Permanent

Key Responsibilities

• Develop engineering solutions that optimize both the technical and quality aspects for customers.
• Design products that meet specific customer requirements.
• Prepare and maintain comprehensive technical specifications, as well as operating and maintenance procedures.
• Develop and implement new product testing and acceptance procedures.
• Conduct in-plant equipment tests on newly designed products to ensure functionality and compliance.
• Actively participate in customer consultations, project discussions, and design review meetings relevant to assigned projects.
• Perform detailed engineering tasks and create/review production drawings to ensure accuracy and adherence to specifications.

APPLY NOW!!!

• A Degree in Mechanical Engineering or a related field.
• Proficiency in SolidWorks software is highly beneficial.
• Previous work experience in oilfield equipment design is considered an advantage.
• Entry-level candidates with a keen interest in design and a strong academic background are welcome to apply.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #68845 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Norman Wee | EA Reg No.: R23115114

Company Overview

Ambiq's mission is to develop the lowest-power semiconductor solutions to enable intelligent devices everywhere by developing the lowest-power semiconductor solutions to drive a more energy-efficient, sustainable, and data-driven world. Ambiq has helped leading manufacturers worldwide develop products that last weeks on a single charge (rather than days) while delivering a maximum feature set in compact industrial designs. Ambiq's goal is to take Artificial Intelligence (AI) where it has never gone before in mobile and portable devices, using Ambiq's advanced ultra-low power system on chip (SoC) solutions. Ambiq has shipped more than 230 million units as of October 2023. For more information, visit www.ambiq.com.

Our innovative and fast-moving teams of research, development, production, marketing, sales, and operations are spread across several continents, including the US (Austin and San Jose), Taiwan (Hsinchu), China (Shenzhen and Shanghai), Japan (Tokyo), and Singapore. We value continued technology innovation, fanatical attention to customer needs, collaborative decision-making, and enthusiasm for energy efficiency. We embrace candidates who also share these same values. The successful candidate must be self-motivated, creative, and comfortable learning and driving exciting new technologies. We encourage and nurture an environment for growth and opportunities to work on complex, engaging, and challenging projects that will create a lasting impact. Join us on our quest for 100 billion devices. The endpoint intelligence revolution starts here.

Responsibilities

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

Specific responsibilities include:

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.
• Develop test plans at block, sub-system, and chip level.
• Execute SoC-based verification at full-chip.
• Write C-based lib packages and tests.
• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.
• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.
• Automating the test environment for randomized testing and scoreboarding.
• Utilize advanced debugging techniques to identify and resolve design and verification issues.
• Perform root-cause analysis and work with design teams to fix identified issues
• Define and track functional and code coverage metrics to ensure thorough verification.
• Ensure that verification quality meets or exceeds industry standards and project requirements.
• Edge-based AI inference is preferred.

Requirements

What you need to have to be successful

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification
• Should have delivered multiple chips functioning to Specification.
• Identify and manage verification deliverables, milestones, and schedules.
• Proactively identify potential verification risks and develop mitigation strategies.
• Collaborate with design, architecture, and software teams to understand and verify design intent.
• Communicate verification progress, issues, and results to stakeholders and management.
• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges
• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.
• C-based verification in an SoC environment is required
• Experience with ARM processor-based designs and low-power design techniques is a plus.
• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile
• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5
• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Responsibilities

• Develop and design mechanical systems and components for machine automation projects.
• Utilize CAD software to create 3D models, assemblies, and detailed drawings.
• Work with the team to ensure designs meet project requirements and standards.
• Assist on various projects consisting of the design, fabrication, and modification of components.
• Coordinate with fabrication house and component suppliers.
• Assist in assembling, installing, and completing the design work in which you were involved.
• Involve in design reviews, troubleshooting, and continuous improvement efforts.
• Perform all given tasks within given time.
• Be committed and responsible.
• Any other duties as assigned.

Requirements / Qualifications

• Diploma / Degree in Mechanical/Mechatronics Engineering or relevant technical discipline.
• Fresh graduates are welcome to apply (Must be willing to learn).
• Candidates with automation background only.
• Proficient in designing and drafting using 3D CAD software.
• Proficient with Microsoft Office.
• Good communication skills.
• Able to start immediately.

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Duties & Responsibilities:

• Responsible for the formulation of schedules and datelines for design and date of submission.
• Check detailed design and drawings based on relevant codes and client specifications, while ensuring the most cost-efficient methods of design are used.
• Liaise and co-ordinate with Project Department to obtain relevant information for detailed design.
• Determine the conditions and study all pertaining data thoroughly and accurately for a design. Many different combinations of loadings are possible and the most probable combination of simultaneous load for an economical and safe design is selected.
• Control and issue all technical documents.
• Any ad hoc project assigned by Design Manager.

Min Qualifications / Experience:

• Bachelor’s degree in mechanical engineering with minimum 3 years relevant experience

Job Skills Required:

• Mechanical design of pressure vessels, heat exchangers & atmospheric storage tanks. Thermal design of heat exchangers is also a required skill.
• Familiar with international design codes such as ASME, British, Australian & European Codes, Tema, API650 & etc.
• Proficient in design software such as PVELite, NozzlePro, StaadPro & Autocad.

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to [email protected]or please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Lee Jia Chian (Jayleen)
EA Personnel Reg No: R24124361

Responsibilities:

· Design and coordinate assigned Civil and Structural projects

· Perform structural analysis and design in building or on any structures as required by the project

· Liaise with clients & consultants to meet C&S requirements.

· Coordinate to ensure civil and structural requirements meet project tender, submission and construction schedule

Requirements:

· Good degree in Civil and Structural Engineering from a recognized University

· Minimum 1-2 year working experience in Civil & Structural consultancy firm

· Conversant with structural programs such as STAAD, TEKLA, ETABS, RAPT would be advantages

· Ability to work independently

· Candidate without the relevant working experience but with good academic results may be considered

- Plan, coordinate and execute projects in interior fit out works (Commercial - Shopping Centre)

- Must have experience in handling F&B projects in the past.
- Good experience in project management and scheduling
- Ability to understand drawing

- Basic knowledge in M&E works will be an advantageous

- Certificate/ diploma in any of the following relevant field such as Architecture, interior design, project management

Acting role:

The Technical Controller appointed must possess a civil or structural engineering degree from a recognised institution and have the right qualifications and experience.

Resident Engineers must meet the acceptable qualifications set by BCA.

(Must be qualified by BCA)

Project Manager (Main jobscope)

• Familiar with all the documents submission to relevant government authorities
• Liaise with consultants and/ or sub-contractors engaged on the project
• Attend regular meeetings with client/ owner/ contractors/ sub-contractors and ensure the progress is on schedule
• Identify and comply with all applicable statuary/ regulatory requirements related to project
• Communication to external parties including client, subcontractors, consultants, vendors, etc on project needs, requirements and schedule by means of daily construction oversight
• Plan the work schedule and efficiently organize the site facilities in order to meet an agreed program of deadlines
• Monitor and manage day-to-day operations of projects, including developing and coordinating activities with other sub-contractors
• Able to read submission plan.

Job Requirement:

• Candidate must possess at least Bachelor's Degree in Engineering (Civil) recognised by PE Board or equivalent
• At least 8 years of working experience in the related field is required for this position

Archangel Digital Studios is a dynamic and innovative digital marketing agency based in Singapore. With a passion for excellence and a focus on creativity, we aim to redefine the standards in the industry.

As a Social Media Design Intern working with the marketing team, you will be required to create visuals and assets for advertising, emailers, social media, flyers, banners and more, as well as bring fresh and creative ideas to the table.

The place of work will be from home.

Responsibilities:

• Graphic design
• Create creative content for marketing collaterals such as flyers & emailers
• Design posts for social media & advertising
• Keep up to date with industry changes and the latest in social media design

Requirements:

• Diploma, degree or experience in design
• A keen eye for aesthetics
• Highly motivated and proactive
• Able to turn around designs quickly
• Able to work independently, methodically and meet deadlines
• Experience with Web Development platforms WIX, WordPress & Shopify advantageous but not required

Design Coordinator cum Drafter

Responsibilities

· Assist designers with project coordination, research and data collection

· Managing design files, documents, and archives

· Creating and editing design materials such as presentations, reports, and graphics

· Conducting research and gathering inspiration for design projects

· Assisting with design concept development and brainstorming

· Ensuring design consistency and quality across projects

· Responsible for general drafting work including the detailing of structural, architectural and other related drawings

· Ensure drawing and proposal drawings are in accordance with specifications

· Prepare all coordination drawings, detail, 2D & 3D shop drawings and as-built drawings etc

· Coordinate and assist Project teams in all on-site technical/engineering matters

Requirements

· Recognized Degree in Architecture or equivalent

· Well versed in BIM

· Good knowledge of AutoCad 2D/3D

· Good communication (both oral/written) as well as presentation skills

. Minimum 2 years’ work experience in construction & design trade in Singapore

• Responsible for USB2.0/USB3.0 device driver development, test, optimisation, and maintenance.
• Perform WHQL testing and certification of drivers and device frameworks.
• Take part in all phases of SDLC and prepare corresponding documentation.

Requirements:

• Degree in Computer Science/Engineering
• At least 5 years of USB device drivers’ development experience in Windows/Linux/mac/WinCE
• Good knowledge of USB2.0/USB3.0/ USBCV protocols and USB Device Classes (HID, MSC, CDC, UVC, UAC, DFU, Custom).

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities:

• Collaborate with Senior Engineers for design requirements and specifications.
• Assist in Analog, mixed-signal, and digital IC design.
• Participate in RTL coding and verification for digital ICs.
• Support design verification tasks.
• Conduct circuit simulations and analysis using Cadence, Synopsys, and Mentor Graphics tools.
• Assist layout engineers with floor planning.
• Analyze and debug silicon failures, suggesting design improvements.
• Contribute to the development of design methodologies to enhance efficiency.
• Document design work and test plans.
• Collaborate with cross-functional teams to ensure successful tape-out.

Requirements:

• Bachelor’s Degree in Electrical Engineering or equivalents.
• At least 2 years of relevant working experience.
• Understanding the IC development flow in advanced CMOS processes, including design, layout, and tape-out.
• Understanding the fundamental theories of digital or analog circuit design.
• Capability to generate inventive designs and circuit solutions tailored to fulfill customer needs.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Ethos Search Associates Pte. Ltd.

EA Licence No: 13C6655

EA Reg No: R1109557 Rose

Job Description

• Work on RTL to GDS, including synthesis, placement, clock tree insertion and routing.
• Responsible for GDS validation like DRC/LVS, timing closure sign-off, scan, validation etc.
• Design, implement and maintain synthesis, DFT and Static Timing Analysis scripts using best-in-class methodologies.
• Work closely with other groups like Analog Design, Systems, Applications and Production in determining architecture and specification of the products.

Job Requirements

• Bachelor/Masters Degree in Electronics/Electrical/Computer Engineering with min 1 year experience
• Good experience and knowledge in design flow from Netlist to GDS, Floor Planning, Synthesis, route , STA, CTS, RC Extraction and correlation
• Static timing analysis, power and noise analysis and back-end verification across multiple projects.
• Proficient with backend design EDA tools, Synopsys ICC2 preferred
• Successfully track records of taping out complex SOC
• Working knowledge of deep sub-micron routing issues as they relate to power and timing.
• Proficiency using Perl and TCL
• Self-motivated team worker, good verbal and written communication skills

Responsibilities:

• Produce design concepts - includes space planning, render 3D perspectives and construction drawings
• To receive requirement brief and discuss project with internal design team and external contractors/suppliers
• Source and select materials, furnishings, lighting fixtures and accessories that enhance the overall design concept
• Prepare presentation materials and design documentations
• Any other ad hoc duties as assigned

Requirements:

• Minimum 3 years of working experience in Interior Design, preferably specializing in Corporate Office Interior Design
• Recognized Diploma/Degree in Interior Design, Architecture or equivalent
• Proficient in AutoCAD, 3Ds Max, V-ray, Photoshop and other design related software
• Possess excellent design flair and highly creative with a good eye for design details
• Strong in conceptual design and space planning skills with strong design portfolio
• Positive attitude, result-oriented and a good team player
• Able to work under pressure and with a sense of urgency to meet tight deadlines

A competitive remuneration package and a long-term career prospect will be offered to the right candidate. Apply now with your full resume including portfolio, work experiences, reason for leaving, current and expected salary and earliest available date.

Job Description

• Industry/ Organization Type: Manufacturing/Food Production
• Position Title: Marketing & Design Coordinator (Food Products)/ Marketing Executive
• Working Location: Jurong West
• Working Hours: 5 days, Mon - Fri (8 am – 5 pm)
• Salary Package: Up to $2900 (basic) + $90 (Transport Allowance) + Variable Bonus
• Duration: Permanent Role

Key Responsibilities

• Oversee brand promotional activities and manage packaging artwork edits.
• Act as an in-house designer for urgent packaging modifications and creation of new Point of Sale Materials (POSMs).
• Maintain and update website content.
• Assist in the development and planning of new products, guiding them from concept to commercialization.
• Support additional marketing activities as needed.

APPLY NOW!!!

• Minimum Diploma holder with 1-2 years of relevant experience.
• Proficiency in using Adobe Illustrator and Photoshop for designing and editing artwork and packaging.
• Experience with social media marketing is highly desirable.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69402 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Our client is a leading construction company, specialize in marine engineering and land reclamation projects.

• Handle the design team to achieve targets for the Civil engineering, Geotechnical engineering, Infrastructural design works.
• Lead consultant and review their design to ensure to meet the relevant requirements and the project’s preference.
• Discuss the design results to the client and other stakeholders and obtain their agreement.
• Enhance the design to reduce cost and construction schedule effectively.
• Finish all design works including necessary approvals without adversary affecting the tender/construction schedule.

Requirements:

• Degree in Civil Engineering recognized by the PE Board
• At least 7 years of marine civil design experience in a large-scale project.
• Good knowledge in international and domestic standards for design work.
• Experience in marine structure D&B plant project and overseas ODA project is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R1326740

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

Meet prospects to expand the firm’s business

Conceptualize interior designs

Crystalize concepts into drawings (hand drawings or software)

Liaise closely with contractors and suppliers, able to plan and monitor delivery schedule

Able to manage client’s expectations and build rapport with clientele

Able to work independently

Great interpersonal and negotiation skills

Self-driven and possess positive attitude to learn

Creative and imaginative

Able to visualize concepts and explain them to clients

Good organizational skills to ensure each project is completed on time and within budget

Self-discipline

Diploma in Interior Design/Architecture

Knowledge in Adobe Photoshop, AutoCAD, 3D StudioMax would be advantageous

Minimum 2 Year(s) of working experience in the related field is required for this position.

Fresh Grads may apply

Company’s profile
Julian Grey's client specialises in electrical engineering services, offering high-quality installation, design, and supply solutions.


Responsibilities:

• Submit designs, shop drawings, and calculations.
• Lead front-end engineering and feasibility studies.
• Assess design specifications for cost savings and technical improvements.
• Ensure seamless integration of services during project meetings.
• Manage the design approval process with all stakeholders.
• Report on design submissions and handle DAR submissions.
• Oversee testing and commissioning of high voltage systems and ISCS.
• Track design deliverables to ensure timely completion.
• Identify and mitigate design risks affecting project performance.

Requirements:

• Minimum Diploma in Electrical Engineering
• M&E experience in the construction industry

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities -https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Account Executive

Address: Redhill
Working days: 5 days Mon to Fri 9/10am to 5pm (can WFH 1-2 days per week)
Salary: $2500 to $3000

Requirements
Diploma in Accounting, Finance, or a related field.
2 years of full-set accounting experience.
Proficiency in accounting software (e.g., QuickBooks).

We are a start-up interior design firm looking for detailed-oriented and organized accounts executive to join our company.
We allow hybrid working arrangements and has a collaborative working environment.

Job Description:
Handle full sets of accounts including invoicing, receipt updates, vendor invoice processing, payment arrangements, journal entries, maintenance, bank reconciliation, balance sheet schedules, fixed assets registers, and general ledger
Manage day-to-day financial operations and monitor cashflow
Prepare and review gst submission and tax returns
Preparation of financial statements and assist in other related statutory filings required
Manage end to end payroll process, including preparation, calculation and disbursement of monthly salary/commission
Ensure compliance with all statutory requirements such as CPF, income tax and other relevant payroll tax obligations
Support general administrative task

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Duration: 6 months

Location: Habourfront

Working Hours: Monday - Friday 830am to 6pm

Responsibilities:

• Ensure consistent brand messaging across all communication platforms
• Craft and develop content for social media, websites, email campaigns, press releases, and print materials
• Plan, execute, and monitor marketing campaigns to drive awareness and engagement
• Organise events and workshops to promote Institute technologies or create mindshare
• Manage marketing communications assignments across departments/divisions/research units within internal and external stakeholders
• Work with Corporate Communications on press materials of technologies/projects for media announcements, speeches and other level communications initiatives or events

Requiments:

• Degree in Marketing, Communications, or a related field
• At least 2 to 3 years of experience with a good command of English, and can demonstrate hands-on competencies in copywriting, graphic design and video production
• Have a good understanding of the multi-channel media landscape
• Excellent writing and editing skills, with the ability to produce clear, concise, and engaging content
• Excellent communicator with strong verbal and presentation skillsets, as well as people engagement skills
• Proficiency in graphic design tools (Adobe Creative Suite, Canva) and video editing software
• Excellent command of English and video production skill is required

To apply, simply click "APPLY" and submit your curriculum vitae (CV) through GO, the official PERSOLKELLY job application platform

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R23114622 So Man Xin

We are actively seeking a skilled and enthusiastic Floral Trainer and Assessor with expertise in both traditional flower arrangements and floral commercial displays for events such as weddings and retail settings. This role is ideal for someone with a robust understanding of floral aesthetics and commercial floral setups who is eager to impart knowledge and skills to budding floral artisans and designers.

Key Responsibility

• Conduct WSQ accredited training in Flower Arrangement and Floral Commercial Display.
• Lead hands-on demonstrations and workshops, focusing on core floral design techniques, safety practices, and the setup for various events.
• Mentor and guide students, enhancing their artistic and technical abilities in floral design.
• Evaluate student performance in practical sessions and offer targeted feedback to foster improvement.
• Promote stringent safety and hygiene practices within the workshop.
• Manage the maintenance of cleanliness and safety protocols in the training environment.
• Ensure the workshop space is well-organized and that hygiene standards are consistently met.
• Supervise the maintenance and condition of all workshop tools and equipment.

Qualifications:

• Preferred ACTA or ACLP certification.
• Comprehensive knowledge of floral design techniques, safety protocols, and industry standards.
• Strong communication and presentation skills.
• A patient, passionate approach to teaching and mentoring.
• Team player with the ability to adapt to a dynamic training environment.

Additional Information:

• Comprehensive training will be provided to equip the successful candidate with the necessary skills and knowledge.